ES-MODULE-MIB Table View

Table of descriptive and status information about
the modules.

esModuleEntry row .1.3.6.1.4.1.437.1.1.2.1.2.1.1

An entry in the table, containing information
about one of the modules.

Indexes

esModuleIndex

Column	Syntax	OID
esModuleIndexmandatory This object identifies the module for which this entry contains information. This value is never greater than esModuleCapacity.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.437.1.1.2.1.2.1.1.1
esModuleStatusmandatory Current operational status of the module. This value is the same as swPortStatus for the corresponding switched port. Possible values are: enabled : normal operation (transmit and receive) disabled-mgmt …	Enumeration Enumerated Values: 1 enabled 2 disabled-mgmt 3 suspended-linkbeat 4 suspended-jabber 5 suspended-violation 7 disabled-violation 9 suspended-not-present 10 suspended-not-recognized 11 reset 12 suspended-ringdown 13 suspended-stp 14 disabled-self-test 15 enabled-degraded 16 suspended-atm-lane-down 17 suspended-no-vlan 18 disabled-no-vlan 19 suspended-atm-network-down 20 suspended-disl	.1.3.6.1.4.1.437.1.1.2.1.2.1.1.2
esModuleAdminStatusmandatory By explicit management action, change the port status to either enabled : normal status (transmit and receive) disabled-mgmt: port is no longer in use. This value is the same as swPortAdminStatus for the correspond…	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.437.1.1.2.1.2.1.1.3
esModuleDescrmandatory A text string which includes the full name and version identification of the module's hardware type.	OctetString Constraints: range: 0-80	.1.3.6.1.4.1.437.1.1.2.1.2.1.1.4
esModuleIDmandatory A text representation of the Cisco specified identifier for the installed module, or 'notPresent'.	OctetString Constraints: range: 0-60	.1.3.6.1.4.1.437.1.1.2.1.2.1.1.5
esModuleVersionmandatory The Cisco specified unique identification for the module version, ranging from 1 to 254.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.437.1.1.2.1.2.1.1.6
esModuleObjectIDmandatory The vendor's authoritative identification of the module. This value may be allocated within the SMI enterprises subtree (1.3.6.1.4.1) and provides a straight-forward and unambiguous means for determining what kind of g…	ObjectIdentifier	.1.3.6.1.4.1.437.1.1.2.1.2.1.1.7
esModulePortCapacitymandatory The number of external port attachments provided by the module.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.437.1.1.2.1.2.1.1.8
esModuleResetmandatory Setting this object to reset causes the module to be forced into a reset state. The reset state is a module specific condition in which the module's packet operations will cease while the module resets to a known state.	Enumerationr/w Enumerated Values: 1 reset 2 noReset	.1.3.6.1.4.1.437.1.1.2.1.2.1.1.9
esModuleLastStatusChangemandatory Contains the value of sysUpTime at the time that the value of the esModuleStatus object for this module last changed. A value of zero indicates that the group's operational status has not changed since the agent last re…	RFC1155-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.437.1.1.2.1.2.1.1.10
esModuleCollisionPeriodsmandatory Contains the count of times the firmware has toggled the front panel module collision LED from the off state to the on state. Successive reads of the counter may network management software an indication of the rate of…	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.437.1.1.2.1.2.1.1.11
esModuleLinkDisplayMapmandatory A bit array where the presence of a particular bit indicates a lit link LED for a module port. Each octet within the value of this object specifies a set of eight link LEDs, with the first octet specifyin…	OctetString	.1.3.6.1.4.1.437.1.1.2.1.2.1.1.12
esModuleDisabledDisplayMapmandatory A bit array where the presence of a particular bit indicates a lit disabled LED for a module port. Each octet within the value of this object specifies a set of eight disabled LEDs, with the first octet s…	OctetString	.1.3.6.1.4.1.437.1.1.2.1.2.1.1.13
esModuleBroadcastStormBlockedmandatory The current broadcast forwarding status of this module. If this module is blocked by broadcast storm control, the switch drops all broadcasts received from the module. If the module is a multi-port repeater, broadcast r…	Enumeration Enumerated Values: 1 notBlocked 2 blocked	.1.3.6.1.4.1.437.1.1.2.1.2.1.1.14
esModuleFirmwareVersionmandatory This object returns the version number of the firmware stored in FLASH memory on the module. The string has the format 'v1.00' for the FDDI module. For the ATM module, the string is longer.	OctetString Constraints: range: 0-80	.1.3.6.1.4.1.437.1.1.2.1.2.1.1.15
esModuleBOOTCodeVersionmandatory This object returns the version number of the BOOT code stored in permanent FLASH memory on the module. The string has the format 'v1.00' for the FDDI module. For the ATM module, the string is longer.	OctetString Constraints: range: 0-80	.1.3.6.1.4.1.437.1.1.2.1.2.1.1.16
esModuleFlashStatusmandatory A string of up to 80 characters indicating the status of the firmware stored in the module's FLASH memory. The string includes the firmware revision, the data and time of the last upgrade, the source of the upgrade, as…	OctetString Constraints: range: 0-80	.1.3.6.1.4.1.437.1.1.2.1.2.1.1.17
esModuleResetToFactoryDefaultsmandatory Setting this object to reset(2) will cause the settings on the module to revert to factory defaults. The module will then be reset by the system. The module's packet operations will cease while the module resets to a …	Enumerationr/w Enumerated Values: 1 noReset 2 reset	.1.3.6.1.4.1.437.1.1.2.1.2.1.1.18
esModuleSwPortIndexmandatory This is the value of swPortIndex object in the STANDALONE-ETHERNET-SWITCH-MIB corresponding to the module.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.437.1.1.2.1.2.1.1.19

Table of descriptive and status information about
the individual ports in a module.

esModulePortEntry row .1.3.6.1.4.1.437.1.1.2.1.3.1.1

An entry in the table, containing information
about one of the repeater ports.

Indexes

esModuleSlotIndex esModulePortIndex

Column	Syntax	OID
esModuleSlotIndexmandatory This is the value of esModuleIndex object of the module which this port belongs to. This value is never greater than esModuleCapacity.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.437.1.1.2.1.3.1.1.1
esModulePortIndexmandatory This object identifies the port for which this entry contains information. This value is never greater than esModulePortCapacity.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.437.1.1.2.1.3.1.1.2
esModulePortDescrmandatory A descriptive string of up to 60 characters used by the network administrator to name the port.	OctetStringr/w Constraints: range: 0-60	.1.3.6.1.4.1.437.1.1.2.1.3.1.1.3
esModulePortAdminStatusmandatory By explicit management action, change the port status to either enabled : normal status (transmit and receive) disabled : the port neither transmits nor receives. Once disabled, a por…	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.437.1.1.2.1.3.1.1.4
esModulePortAutoPartitionStatemandatory Indicates whether the port is currently partitioned by the repeater's auto-partition protection.	Enumeration Enumerated Values: 1 notAutoPartitioned 2 autoPartitioned	.1.3.6.1.4.1.437.1.1.2.1.3.1.1.5
esModulePortOperStatusmandatory Indicates the port's operational status. enabled : port is enabled and working notOperational : the port neither transmits nor receives suspended-not-present: the module group is not installed.	Enumeration Enumerated Values: 1 enabled 2 disabled 3 suspended-not-present	.1.3.6.1.4.1.437.1.1.2.1.3.1.1.6
esModulePortLinkbeatStatusmandatory The port's current linkbeat status.	Enumeration Enumerated Values: 1 linkbeat 2 noLinkbeat	.1.3.6.1.4.1.437.1.1.2.1.3.1.1.7
esModulePortConnectorTypemandatory The connector type for the port. It is one of other : none of the following (unknown) rj45 : common unshielded twisted pair connector bnc : thin-coax (BNC) aui : thick-coax (A…	Enumeration Enumerated Values: 1 other 2 rj45 3 bnc 4 aui 5 fiber-sc 6 fiber-st 7 empty 8 fddi-mic	.1.3.6.1.4.1.437.1.1.2.1.3.1.1.8
esModulePortReceivePeriodsmandatory Contains the count of times the front panel port receive activity LED has been toggled from the off state to the on state. Successive reads of this counter give network management software an indication of receive acti…	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.437.1.1.2.1.3.1.1.9

Table of configuration and status information about
FDDI modules.

fmCfgEntry row .1.3.6.1.4.1.437.1.1.2.2.1.1.1.1

An entry in the table, containing information
about one a FDDI module.

Indexes

fmCfgIndex

Column	Syntax	OID
fmCfgIndexmandatory This object identifies the module for which this entry contains information. This value is never greater than esModuleCapacity.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.437.1.1.2.2.1.1.1.1.1
fmCfgFirmwareVersionmandatory This object returns the version number of the firmware stored in FLASH memory on the FDDI module. The string has the format 'v1.00'.	OctetString Constraints: range: 0-10	.1.3.6.1.4.1.437.1.1.2.2.1.1.1.1.2
fmCfgBOOTCodeVersionmandatory This object returns the version number of the BOOT code stored in permanent FLASH memory on the FDDI module. The string has the format 'v1.00'.	OctetString Constraints: range: 0-10	.1.3.6.1.4.1.437.1.1.2.2.1.1.1.1.3
fmCfgPOSTResultmandatory This object indicates the result of the FDDI module's Power On Self Test (POST). If the module passed POST, this item will return noFailure(1).	Enumeration Enumerated Values: 1 noFailure 2 prom 3 cpu 4 flash 5 dram 6 arbiter 7 shared-ram 8 ethernet 9 fddi-mac 10 fddi-phy-a 11 fddi-phy-b 12 packet-ram	.1.3.6.1.4.1.437.1.1.2.2.1.1.1.1.4
fmCfgPOSTTestmandatory This object indicates the specific test that caused the POST to fail. If the module passed POST, this item will return noFailure(1).	Enumeration Enumerated Values: 1 noFailure 2 invalid-marker 3 checksum 4 ram-quick-scan 5 ram-byte-test 6 checkerboard 7 arbiter-id 8 read-only-register 9 read-write-register 10 ethernet-interrupt 11 loopback 12 invalid-version	.1.3.6.1.4.1.437.1.1.2.2.1.1.1.1.5
fmCfgPOSTLoopbackResultmandatory In the event that the FDDI module fails the loopback test during POST, this object will indicate which portion of the test caused the failure. If the value of fmCfgPOSTTest is anything other than loopback(11), this obj…	Enumeration Enumerated Values: 1 noFailure 2 cannot-transmit 3 receive-timeout 4 data-mismatch 5 length-mismatch 6 receiver-error 7 buffer-error	.1.3.6.1.4.1.437.1.1.2.2.1.1.1.1.6
fmCfgFlashStatusmandatory A string of up to 80 characters indicating the status of the firmware stored in the FDDI module's FLASH memory. The string includes the firmware revision, the data and time of the last upgrade, the source of the upgrad…	OctetString Constraints: range: 0-80	.1.3.6.1.4.1.437.1.1.2.2.1.1.1.1.7
fmCfgResetToFactoryDefaultsmandatory Setting this object to reset(2) will cause the settings on the FDDI module to revert to factory defaults. The module will then be reset by the system. The module's packet operations will cease while the module resets …	Enumerationr/w Enumerated Values: 1 noReset 2 reset	.1.3.6.1.4.1.437.1.1.2.2.1.1.1.1.8
fmCfgResetModulemandatory Setting this object to reset(2) causes the module to be forced into a reset state. During the reset state, the module's packet operations will cease while the module resets to a known state.	Enumerationr/w Enumerated Values: 1 noReset 2 reset	.1.3.6.1.4.1.437.1.1.2.2.1.1.1.1.9
fmCfgNovellFDDISNAPTranslationmandatory This object specifies the Ethernet frame type that the FDDI module will translate Novell SNAP FDDI frames into. automatic(1): the FDDI module will automatically learn which frame t…	Enumerationr/w Enumerated Values: 1 automatic 2 ethernet-8023 3 ethernet-SNAP 4 ethernet-II 5 drop	.1.3.6.1.4.1.437.1.1.2.2.1.1.1.1.10
fmCfgUnmatchedSNAPDestinationmandatory This object specifies what the FDDI module is to do with Novell SNAP FDDI frames whose destination frame type cannot be determined. The value of this object is only valid when fmCfgNovellFDDISNAPTranslation is set to a…	Enumerationr/w Enumerated Values: 1 all 2 ethernet-8023 3 ethernet-SNAP 4 ethernet-II 5 drop	.1.3.6.1.4.1.437.1.1.2.2.1.1.1.1.11
fmCfgAuthorizationCheckingmandatory This object controls enabling and disabling of authorization string checking by the SMT entity. When enabled, the FDDI module will use the current authorization string to verify SMT requests from remote stations. This…	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.437.1.1.2.2.1.1.1.1.12
fmCfgAuthorizationStringmandatory This item specifies the string to be used in the authentication of SMT requests. The length is from 0 to 32 bytes and must be a multiple of 4 bytes. This item is only used when authorization string checking is enabled.	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.437.1.1.2.2.1.1.1.1.13

Table of statistics that count the number of
frames successfully forwarded from the FDDI
module to the switch forwarding engine.

fmXlateToEthEntry row .1.3.6.1.4.1.437.1.1.2.2.1.2.1.1

An entry in the table, containing information
about a FDDI module.

Indexes

fmXlateToEthIndex

Column	Syntax	OID
fmXlateToEthIndexmandatory This object identifies the module for which this entry contains information. This value is never greater than esModuleCapacity.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.437.1.1.2.2.1.2.1.1.1
fmXlateToEthNovellSnapToRaw8023Framesmandatory This object is a count of the number of Novell SNAP FDDI frames that have been converted to Raw 802.3 Ethernet frames.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.437.1.1.2.2.1.2.1.1.2
fmXlateToEthNovellSnapToEthIIFramesmandatory This object is a count of the number of Novell SNAP FDDI frames that have been converted to Ethernet II frames.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.437.1.1.2.2.1.2.1.1.3
fmXlateToEthNovellSnapToSnapFramesmandatory This object is a count of the number of Novell SNAP FDDI frames that have been converted to Novell SNAP Ethernet frames.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.437.1.1.2.2.1.2.1.1.4
fmXlateToEthAppleTalkSnapToSnapFramesmandatory This object is a count of the number of AppleTalk SNAP FDDI frames that have been converted to Novell SNAP Ethernet frames.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.437.1.1.2.2.1.2.1.1.5
fmXlateToEthIpSnapForFragmentationFramesmandatory This object is a count of the number of IP FDDI frames that were fragmented.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.437.1.1.2.2.1.2.1.1.6
fmXlateToEthIpSnapFragmentedFramesmandatory This object is a count of the number of Ethernet frames that were forwarded to the switch forwarding engine as a result of IP fragmentation.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.437.1.1.2.2.1.2.1.1.7
fmXlateToEthBridgeTunnelToEthIIFramesmandatory This object is a count of the number of Bridge Tunnel FDDI frames that have been converted to Ethernet II frames.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.437.1.1.2.2.1.2.1.1.8
fmXlateToEthOtherSnapToEthIIFramesmandatory This object is a count of the number of SNAP FDDI frames that do not fall into one of the previous SNAP FDDI categories that have been converted to Ethernet II frames.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.437.1.1.2.2.1.2.1.1.9
fmXlateToEthOtherSnapToSnapFramesmandatory This object is a count of the number of SNAP FDDI frames that do not fall into one of the previous SNAP FDDI categories that have been converted to Ethernet SNAP frames.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.437.1.1.2.2.1.2.1.1.10
fmXlateToEth8022To8022Framesmandatory This object is a count of the number of 802.2 FDDI frames that have been converted to Ethernet 802.2 frames.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.437.1.1.2.2.1.2.1.1.11

Table of statistics that count the number of
frames successfully forwarded from the switch
forwarding engine to the FDDI ring.

fmXlateToFDDIEntry row .1.3.6.1.4.1.437.1.1.2.2.1.3.1.1

An entry in the table, containing information
about a FDDI module.

Indexes

fmXlateToFDDIIndex

Column	Syntax	OID
fmXlateToFDDIIndexmandatory This object identifies the module for which this entry contains information. This value is never greater than esModuleCapacity.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.437.1.1.2.2.1.3.1.1.1
fmXlateToFDDINovellRaw8023ToSnapFramesmandatory This object is a count of the number of Novell Raw 802.3 Ethernet frames that have been converted to SNAP FDDI frames.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.437.1.1.2.2.1.3.1.1.2
fmXlateToFDDINovellEthIIToSnapFramesmandatory This object is a count of the number of Ethernet II frames that have been converted to SNAP FDDI frames.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.437.1.1.2.2.1.3.1.1.3
fmXlateToFDDINovellSnapToSnapFramesmandatory This object is a count of the number of Novell SNAP Ethernet frames that have been converted to SNAP FDDI frames.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.437.1.1.2.2.1.3.1.1.4
fmXlateToFDDIEthIIToBridgeTunnelFramesmandatory This object is a count of the number of Ethernet II frames that have been converted to Bridge Tunnel FDDI frames.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.437.1.1.2.2.1.3.1.1.5
fmXlateToFDDIEthIIToSnapFramesmandatory This object is a count of the number of Ethernet II frames that have been converted to SNAP FDDI frames.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.437.1.1.2.2.1.3.1.1.6
fmXlateToFDDIOtherSnapToSnapFramesmandatory This object is a count of the number of SNAP frames that do not fall into one of the above listed SNAP type categories that have been translated to Ethernet II.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.437.1.1.2.2.1.3.1.1.7
fmXlateToFDDI8022To8022Framesmandatory This object is a count of the number of FDDI 802.2 frames that have been converted to Ethernet 802.2 frames.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.437.1.1.2.2.1.3.1.1.8

Table of statistics that count the number of
frames that were not forwarded by the FDDI module.

fmFilterEntry row .1.3.6.1.4.1.437.1.1.2.2.1.4.1.1

An entry in the table, containing information
about a FDDI module.

Indexes

fmFilterIndex

Column	Syntax	OID
fmFilterIndexmandatory This object identifies the module for which this entry contains information. This value is never greater than esModuleCapacity.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.437.1.1.2.2.1.4.1.1.1
fmFilterFcsInvalidFramesmandatory This object is a count of the number of FDDI frames that were not forwarded because the frame contained an invalid FCS.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.437.1.1.2.2.1.4.1.1.2
fmFilterDataLengthFramesmandatory This object is a count of the number of FDDI frames that were not forwarded because the frame contained an invalid data length.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.437.1.1.2.2.1.4.1.1.3
fmFilterErrorIndFramesmandatory This object is a count of the number of FDDI frames that were not forwarded because the frame's error indication flag was set.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.437.1.1.2.2.1.4.1.1.4
fmFilterFddiFifoOverrunFramesmandatory This object is a count of the number of FDDI frames that were not forwarded because the FDDI FIFO experienced an overflow.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.437.1.1.2.2.1.4.1.1.5
fmFilterFddiInternalErrorFramesmandatory This object is a count of the number of FDDI frames that were not forwarded because the module experienced an internal error.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.437.1.1.2.2.1.4.1.1.6
fmFilterNoBufferSpaceFramesmandatory This object is a count of the number of FDDI frames that were not forwarded because the module did not have sufficient buffer space.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.437.1.1.2.2.1.4.1.1.7
fmFilterNoEndDelimitFramesmandatory This object is a count of the number of FDDI frames that were not forwarded because the frame did not have a valid end delimiter.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.437.1.1.2.2.1.4.1.1.8
fmFilterNoLlcHeaderFramesmandatory This object is a count of the number of FDDI frames that were not forwarded because the frame did not have a valid LLC header.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.437.1.1.2.2.1.4.1.1.9
fmFilterSourceRouteFramesmandatory The FDDI module does not forward source routing frames. This object is a count of the number of such frames that were filtered.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.437.1.1.2.2.1.4.1.1.10
fmFilterNoSnapHeaderFramesmandatory This object is a count of the number of FDDI frames that were not forwarded because the frame did not have a valid SNAP header.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.437.1.1.2.2.1.4.1.1.11
fmFilterTooLargeFramesmandatory This object is a count of the number of FDDI frames that were not forwarded because the frame was too large.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.437.1.1.2.2.1.4.1.1.12
fmFilterNovellSnapFilteredFramesmandatory This object is a count of the number of Novell SNAP FDDI frames that were filtered by the module.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.437.1.1.2.2.1.4.1.1.13
fmFilterCantFragmentFramesmandatory This object is a count of the number of FDDI IP frames that were not forwarded because the module was unable to fragment the frame.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.437.1.1.2.2.1.4.1.1.14
fmFilterBadIpHeaderFramesmandatory This object is a count of the number of FDDI frames that were not forwarded because the frame contained an invalid IP header.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.437.1.1.2.2.1.4.1.1.15
fmFilterRingDownDiscardsmandatory This object is a count of the number of FDDI frames that were not forwarded because the FDDI ring was not operational.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.437.1.1.2.2.1.4.1.1.16
fmFilterNovellOtherFilteredFramesmandatory This object is the sum of the Novell Ethernet frames that were not forwarded because they contained an invalid size field and the number of Novell Ethernet frames that were not forwarded because the FDDI module was conf…	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.437.1.1.2.2.1.4.1.1.17

Table of configuration and status information about
ATM modules.

fmAtmCfgEntry row .1.3.6.1.4.1.437.1.1.2.2.2.1.1.1

An entry in the table, containing information
about one ATM module.

Indexes

fmAtmCfgIndex

Column	Syntax	OID
fmAtmCfgIndexmandatory This object identifies the module for which this entry contains information. This value is never greater than esModuleCapacity.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.437.1.1.2.2.2.1.1.1.1
fmAtmCfgPOSTResultmandatory This object indicates the result of the ATM module's Power On Self Test (POST), that is, which module component, if any, failed POST. If the module passed POST, this item will return no-failure(2).	Enumeration Enumerated Values: 1 other 2 unknown 3 no-failure 4 fpga 5 shared-memory 6 host-interface 7 ethernet-controller 8 sar-controller 9 sar-memory 10 framer 11 traffic-co-processor 12 traffic-co-processor-memory 13 flash	.1.3.6.1.4.1.437.1.1.2.2.2.1.1.1.2
fmAtmCfgPOSTTestmandatory This object indicates the specific test that caused the POST to fail. If the ATM module passed POST, this item will return no-failure(2).	Enumeration Enumerated Values: 1 other 2 unknown 3 no-failure 4 refresh 5 quick-scan-word 6 quick-scan-byte 7 byte-pattern 8 checkerboard 9 no-response 10 data-mismatch 11 interrupt 12 control-memory 13 checksum 14 read-only-configuration-register 15 read-write-configuration-register 16 read-only-register 17 read-write-register 18 local-loopback 19 host-loopback 20 module-to-host-interrupt 21 host-to-module-interrupt	.1.3.6.1.4.1.437.1.1.2.2.2.1.1.1.3
fmAtmCfgPOSTLoopbackResultmandatory In the event that the ATM module fails a loopback test during POST, this object will indicate which portion of the test caused the failure. If the value of fmAtmCfgPOSTTest is anything other than local-loopback(17) or …	Enumeration Enumerated Values: 1 other 2 unknown 3 no-failure 4 cannot-transmit 5 receive-timeout 6 data-mismatch 7 length-mismatch 8 receiver-error 9 buffer-error	.1.3.6.1.4.1.437.1.1.2.2.2.1.1.1.4
fmAtmCfgFramingModemandatory The mode of operation for the SONET PLIM. The default value is sts-3c(1).	Enumeration Enumerated Values: 1 sts-3c 2 stm-1	.1.3.6.1.4.1.437.1.1.2.2.2.1.1.1.5

Table of receive statistics on ATM modules.

fmAtmRxStatEntry row .1.3.6.1.4.1.437.1.1.2.2.2.2.1.1

An entry in the table, containing receive statistics
about one ATM module.

Indexes

fmAtmRxStatIndex

Column	Syntax	OID
fmAtmRxStatIndexmandatory This object identifies the module for which this entry contains information. This value is never greater than esModuleCapacity.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.437.1.1.2.2.2.2.1.1.1
fmAtmRxControlFramesmandatory A count of number of AAL5 control frames received by the module.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.437.1.1.2.2.2.2.1.1.2
fmAtmRxLocalLecFramesmandatory A count of AAL5 frames received with LEC ids matching the module's LEC id. These frames are discarded.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.437.1.1.2.2.2.2.1.1.3
fmAtmRxNoBufferDiscardsmandatory A count of AAL5 frames received that were discarded due to a lack of frame buffer resources in the module's forwarding engine.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.437.1.1.2.2.2.2.1.1.4
fmAtmRxCRCErrorsmandatory A count of AAL5 frames received that were discarded due to CRC errors.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.437.1.1.2.2.2.2.1.1.5
fmAtmRxFrameTooLongsmandatory A count of AAL5 frames received that exceed the maximum permitted frame size as defined by ifMtu object the port.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.437.1.1.2.2.2.2.1.1.6
fmAtmRxOtherDiscardsmandatory A count of AAL5 frames received that were discarded due to reasons other than a lack of frame buffer resources in the module's forwarding engine, errors, frames exceeding maximum frame size, or frames with LEC id matchi…	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.437.1.1.2.2.2.2.1.1.7
fmAtmRxHecCellErrorsmandatory A count of ATM cells received with errors in HEC header.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.437.1.1.2.2.2.2.1.1.8