ERICSSON-ROUTER-OPTICAL-TRANSCEIVER-MIB
Recognized by Observium The MIB used to manage the Optical Transceivers
in Line Card ports in SSR
Observium recognizes this MIB
Observium uses this MIB to identify device capabilities or determine applicability.
Explore Observium network monitoring
- Source file
ERICSSON-ROUTER-OPTICAL-TRANSCEIVER-MIB- Last revised
- Identity
eriRouterOpticalTransceiver- Base OID
1.3.6.1.4.1.193.218.2.50
Imported Objects
| ERICSSON-ROUTER-ALARM-TC | EriRouterAlarmId EriRouterAlarmPerceivedSeverity EriRouterAlarmServiceAffecting |
| ERICSSON-ROUTER-SFP-MIB | eriRouterSfpAlarmDateAndTime eriRouterSfpAlarmDescription eriRouterSfpAlarmId eriRouterSfpAlarmProbableCause eriRouterSfpAlarmSeverity eriRouterSfpAlarmType eriRouterSfpMonMIBConformance eriRouterSfpMonMIBNotifications eriRouterSfpMonMIBObjects |
| ERICSSON-ROUTER-SMI | eriRouterMgmt |
| ERICSSON-ROUTER-TC | EriRouterPort EriRouterSlot |
| IANA-ITU-ALARM-TC-MIB | IANAItuProbableCause |
| IF-MIB | ifIndex |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE (no object page) NOTIFICATION-GROUP (no object page) OBJECT-GROUP (no object page) |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY (no object page) NOTIFICATION-TYPE (no object page) OBJECT-TYPE (no object page) transmission Unsigned32 |
| SNMPv2-TC | DateAndTime DisplayString TEXTUAL-CONVENTION (no object page) TruthValue |
Net-SNMP examples using the ericsson MIB directory Show commands
These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.
Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'ERICSSON-ROUTER-OPTICAL-TRANSCEIVER-MIB' -M '/opt/observium/mibs/ericsson:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'ERICSSON-ROUTER-OPTICAL-TRANSCEIVER-MIB::eriRouterOpticalTransceiver'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ERICSSON-ROUTER-OPTICAL-TRANSCEIVER-MIB' -M '/opt/observium/mibs/ericsson:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ERICSSON-ROUTER-OPTICAL-TRANSCEIVER-MIB::eriRouterOpticalTransceiver'
Objects (44)
Showing 44 of 44 objects
Object legend
Object type
Icons distinguish tables, entry rows, columns, scalars, and structural nodes.
SNMPv2-TCTruthValue
Syntax
Blue badges identify the value syntax. Connected badges read as defining module and convention.
IF-MIBifIndex
Table index
Green identifies an index object; yellow names its module when the index is defined elsewhere.
r/w
deprecated
obsolete
Access and status
r/w means read-write. Grey labels mark definitions retained for compatibility.
OBS ✓
Observium use
The indicator appears only when Observium directly references that object.
ifOperStatus
.1.3.6.1.2.1…
Names and OIDs
Object names link to their detail pages. Hover or focus a linked name or badge for available definition details.
.1.3.6.1.4.1.193.218.2.49.2.3 |
||
.1.3.6.1.4.1.193.218.2.49.2.4 |
||
.1.3.6.1.4.1.193.218.2.50 |
||
.1.3.6.1.4.1.193.218.2.50.1 |
||
.1.3.6.1.4.1.193.218.2.50.1.1 |
||
.1.3.6.1.4.1.193.218.2.50.1.1.1 |
||
.1.3.6.1.4.1.193.218.2.50.1.1.1.1 |
||
.1.3.6.1.4.1.193.218.2.50.1.1.1.10 |
||
|
OctetString
|
.1.3.6.1.4.1.193.218.2.50.1.1.1.11 |
|
|
OctetString
|
.1.3.6.1.4.1.193.218.2.50.1.1.1.12 |
|
|
OctetString
|
.1.3.6.1.4.1.193.218.2.50.1.1.1.13 |
|
|
OctetString
|
.1.3.6.1.4.1.193.218.2.50.1.1.1.14 |
|
|
OctetString
|
.1.3.6.1.4.1.193.218.2.50.1.1.1.15 |
|
|
OctetString
|
.1.3.6.1.4.1.193.218.2.50.1.1.1.16 |
|
|
OctetString
|
.1.3.6.1.4.1.193.218.2.50.1.1.1.17 |
|
.1.3.6.1.4.1.193.218.2.50.1.1.1.18 |
||
.1.3.6.1.4.1.193.218.2.50.1.1.1.19 |
||
.1.3.6.1.4.1.193.218.2.50.1.1.1.2 |
||
.1.3.6.1.4.1.193.218.2.50.1.1.1.20 |
||
|
OctetString
|
.1.3.6.1.4.1.193.218.2.50.1.1.1.3 |
|
|
OctetString
|
.1.3.6.1.4.1.193.218.2.50.1.1.1.4 |
|
.1.3.6.1.4.1.193.218.2.50.1.1.1.5 |
||
.1.3.6.1.4.1.193.218.2.50.1.1.1.6 |
||
|
OctetString
|
.1.3.6.1.4.1.193.218.2.50.1.1.1.7 |
|
|
OctetString
|
.1.3.6.1.4.1.193.218.2.50.1.1.1.8 |
|
|
OctetString
|
.1.3.6.1.4.1.193.218.2.50.1.1.1.9 |
|
.1.3.6.1.4.1.193.218.2.50.1.2 |
||
.1.3.6.1.4.1.193.218.2.50.1.2.1 |
||
.1.3.6.1.4.1.193.218.2.50.1.2.1.1 |
||
|
OctetString
|
.1.3.6.1.4.1.193.218.2.50.1.2.1.2 |
|
.1.3.6.1.4.1.193.218.2.50.1.2.1.3 |
||
.1.3.6.1.4.1.193.218.2.50.1.2.1.4 |
||
.1.3.6.1.4.1.193.218.2.50.1.2.1.5 |
||
.1.3.6.1.4.1.193.218.2.50.1.2.1.6 |
||
.1.3.6.1.4.1.193.218.2.50.1.2.1.7 |
||
.1.3.6.1.4.1.193.218.2.50.1.3 |
||
.1.3.6.1.4.1.193.218.2.50.1.3.1 |
||
|
Integer32
|
.1.3.6.1.4.1.193.218.2.50.1.3.1.1 |
|
.1.3.6.1.4.1.193.218.2.50.1.3.1.2 |
||
.1.3.6.1.4.1.193.218.2.50.1.3.1.3 |
||
.1.3.6.1.4.1.193.218.2.50.1.3.1.4 |
||
.1.3.6.1.4.1.193.218.2.50.1.3.1.5 |
||
.1.3.6.1.4.1.193.218.2.50.1.3.1.6 |
||
.1.3.6.1.4.1.193.218.2.50.1.3.1.7 |
Dependencies (14) 10 direct · 4 transitive Show tree and compile order Hide dependency details
Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.
Dependency tree
Dependency-first compile order
- SNMPv2-SMIrfc
- ERICSSON-TOP-MIBericsson
- ERICSSON-ROUTER-SMIericsson
- SNMPv2-TCrfc
- ERICSSON-ROUTER-ALARM-TCericsson
- ERICSSON-ROUTER-TCericsson
- IANA-ITU-ALARM-TC-MIBrfc
- ITU-ALARM-TC-MIBrfc
- SNMPv2-CONFrfc
- SNMP-FRAMEWORK-MIBrfc
- ERICSSON-ROUTER-SFP-MIBericsson
- IANAifType-MIBrfc
- SNMPv2-MIBrfc
- IF-MIBrfc
- ERICSSON-ROUTER-OPTICAL-TRANSCEIVER-MIBericssonselected
Type Definitions (5)
| Enumeration |
laneTxPower(1)laneRxPower(2)laneTemperature(3)laneLaserBiasCurrent(4)Enums for optical transceiver parameters
laneTxPower (1) : transmitter power laneRxPower (2) : receiver power laneTemperature (3) : Temperature laneLaserBiasCurrent (4) : Laser bias current in 100s of microamperes |
|
| Integer32 |
range: -1000000..1000000 Display format:
d-3Tx power range - unit milli dbm
Rx power range - unit milli dbm temperature range - Represents a temperature, in degrees Celsius (0..(100.000)) Bias Current Range - unit 100s of microamperes |
|
| Enumeration |
txpower(1)rxpower(2)temperature(3)laserBiasCurrent(4)soaBiasCurrent(5)vcc(6)aux1(7)aux2(8)Enums for optical transceiver parameters
txpower (1) : transmitter power rxpower (2) : receiver power temperature (3) : Temperature laserBiasCurrent (4) : Laser bias current in 100s of microamperes soaBiasCurrent (5) : SOA Bias Current in 100s of microamperes Applicable for CFP and similar types of optical transceivers. Vcc (6) : Voltage aux1 (7) : Auxiliary measurement 1 for XFP/CFP and similar types of optical transceivers defined in Byte 222 in INF-8077i: 10 Gigabit Small Form Factor Pluggable Module. aux2 (8) : Auxiliary measurement 2 for XFP/CFP and similar types of optical transceivers defined in Byte 222 in INF-8077i: 10 Gigabit Small Form Factor Pluggable Module |
|
| Integer32 |
range: -1000000..1000000 Display format:
d-2Wave Length in NM in 1/100th
|
|
| Integer32 |
range: -1000000..1000000 Display format:
d-3Tx power value or threshold value - unit milli dbm
Rx power value or threshold value - unit milli dbm temperature value or threshold value - Represents a temperature, in degrees Celsius (0..(100.000)) Bias Current value or threshold value - unit 100s of microamperes Vcc value or threshold value in millivolts AUX1 if measured will be one of the following APD Bias Voltage value or threshold value TEC Current value or threshold value Laser Temperature value or threshold value Laser Wavelength value or threshold value Supply voltage options (+5V or +3.3V or + 1.8V or -5.2V) value or threshold value Supply current options (+5V or +3.3V or + 1.8V or -5.2V) value or threshold value Reserved AUX2 if measured will be one of the following APD Bias Voltage value or threshold value TEC Current value or threshold value Laser Temperature value or threshold value Laser Wavelength value or threshold value Supply voltage options (+5V or +3.3V or + 1.8V or -5.2V) value or threshold value Supply current options (+5V or +3.3V or + 1.8V or -5.2V) value or threshold value Reserved |
Conformance Groups (1)
|
A collection of notifications providing Optical Transceiver
fault condition |
.1.3.6.1.4.1.193.218.2.49.2.3.2
|
Compliance Statements (1)
OID
.1.3.6.1.4.1.193.218.2.49.2.4.1The compliance statement for the OpticalTransceiver MIB
Required groups
| optional | eriRouterOpticalTransceiverMonMIBNotificationGroup |
This group is mandatory for devices which contain Optical Transceiver alarm monitoring capabilities |