EQLNAS-MIB Table View

Column Syntax OID

eqlNASApplianceRowStatus

This field is used indicate the status of this entry.

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …

.1.3.6.1.4.1.12740.18.1.1.1.1

eqlNASAppliancePoolSize

This field is used indicate the size of the NAS Container in MB.

eqlNASApplianceEQLPoolIndex

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.18.1.1.1.2

This field is used to indicate the EQL pool used by the NAS appliance.

eqlNASApplianceReplRemoteUserName

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.18.1.1.1.3

This field is used to indicate the Username EQL will use for NAS replication for all partners.

OctetStringr/w

Constraints:
range: 0-32

.1.3.6.1.4.1.12740.18.1.1.1.4

eqlNASApplianceNFSv4Mode

This field enables or disables NFSv4 Access NAS appliance.

Enumerationr/w

Enumerated Values:

0	disabled
1	enabled

.1.3.6.1.4.1.12740.18.1.1.1.5

eqlNASContainerTable

table

.1.3.6.1.4.1.12740.18.1.3 · 1 row entry · 25 columns

Open in standard view

Uses the equallogic variant from /opt/observium/mibs/equallogic.

Command help

Walk eqlNASContainerTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLNAS-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLNAS-MIB::eqlNASContainerTable'

EqualLogic-Dynamic Appliance Table.
This table contains a list of NAS Appliance configurations for containers the group is managing.
TimeoutAll:60

eqlNASContainerEntry row .1.3.6.1.4.1.12740.18.1.3.1

An entry (row) containing NAS Container info.

Indexes

EQLAPPLIANCE-MIBeqlApplianceIndex eqlNASContainerIndex

Column Syntax OID

eqlNASContainerIndex

Unique Identifier used to create and manage NAS Containers. When creating NAS Containers, value must be retrieved using eqlApplianceUniqueIDValue with eqlApplianceUniqueIDType set to fsid.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.18.1.3.1.1

eqlNASContainerRowStatus

Row status variable used to manage this row.

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.12740.18.1.3.1.2

eqlNASContainerName

Name used to identify NAS Container. Contains only letters, digits and underscores. Must begin with either letter or an underscore.

OctetStringr/w

Constraints:
range: 1-230

.1.3.6.1.4.1.12740.18.1.3.1.3

eqlNASContainerCapacity

Size of NAS Container in MB.

eqlNASContainerUsedSpaceAlert

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.18.1.3.1.4

Alert user when NAS container used space reaches certain % value of NAS container size.Default value is choosen from eqlNASApplianceConfigUsedSpaceAlert

eqlNASContainerSnapshotHardQuota

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.18.1.3.1.5

This threshold, represented as a % of NAS container size, triggers auto-deletion of snapshots. The oldest snapshots are deleted first. Default value is choosen from eqlNASApplianceConfigSnapHardQuota

eqlNASContainerSnapshotUsedSpaceAlert

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.18.1.3.1.6

Alert user when NAS container snapshot used space reaches certain % value of NAS container snapshot size.Default value is choosen from eqlNASApplianceConfigSnapSpaceAlert

eqlNASContainerUnixFilePermissions

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.18.1.3.1.7

This field is applicable only when Security style is set to NFS

eqlNASContainerUnixDirPermissions

.1.3.6.1.4.1.12740.18.1.3.1.8

This field is applicable only when Security style is set to NFS

eqlNASContainerQuotaEnabled

.1.3.6.1.4.1.12740.18.1.3.1.9

eqlNASContainerFileAccessSecurity

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.12740.18.1.3.1.10

Enumerationr/w

Enumerated Values:

1	mixed
2	ntfs
3	unix

.1.3.6.1.4.1.12740.18.1.3.1.11

eqlNASContainerAccessTimeManagementGranularity

Access time management granularity.

Enumerationr/w

Enumerated Values:

0	disabled
1	always
2	everyFiveMinutes
3	hourly
4	daily
5	weekly

.1.3.6.1.4.1.12740.18.1.3.1.12

eqlNASContainerOptimizationEnabled

Enable or disable optimization

eqlNASContainerDedupMethodType

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.12740.18.1.3.1.13

Dedup method to use on this file system when optimization is enabled. Reserved for future use. Currently not supported.

Enumerationr/w

Enumerated Values:

1	variable-chunk
2	object

.1.3.6.1.4.1.12740.18.1.3.1.14

eqlNASContainerCompressionEnabled

enable or disable compression. Restricted by the type of license

eqlNASContainerModificationTimeFilter

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.12740.18.1.3.1.15

Exclude files modified less than the specified number of days before. 30 to 365 days

Integer32r/w

Constraints:
range: 30-365

.1.3.6.1.4.1.12740.18.1.3.1.16

eqlNASContainerAccessTimeFilter

Exclude files accessed less than the specified number of days before. 30 to 365 days

Integer32r/w

Constraints:
range: 30-365

.1.3.6.1.4.1.12740.18.1.3.1.17

eqlNASContainerExcludeFilesByNamePatterndeprecated

Regular expression identifying the file name pattern to exclude from optimization. Empty string means no exclusion.

OctetStringr/w

Constraints:
range: 1-256

.1.3.6.1.4.1.12740.18.1.3.1.18

eqlNASContainerAction

Use this column to perform actions on this container.

Enumerationr/w

Enumerated Values:

0	none
1	delete-host-access-cfg

.1.3.6.1.4.1.12740.18.1.3.1.19

eqlNASContainerDefaultUserQuota

Default quota per user when quotas are enabled on NAS Containers.

eqlNASContainerDefaultUserQuotaAlert

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.18.1.3.1.20

Specified as a percentage of default group quota as a default for containers in this nas-group.
This is the amount of used space that triggers user alerts

eqlNASContainerDefaultGroupQuota

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.18.1.3.1.21

Default quota per group when quotas are enabled on NAS Containers.

eqlNASContainerDefaultGroupQuotaAlert

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.18.1.3.1.22

Specified as a percentage of default group quota as a default for containers in this nas-group.
This is the amount of used space that triggers user alerts

eqlNASContainerOptimizationFilterMode

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.18.1.3.1.23

Specifies the filter mode to be applied to qualify files for data reduction.
user-filters implies files need to meet the access time and modify time filter
criteria before they can be considered for data reduction.
i…

Enumerationr/w

Enumerated Values:

0	use-filters
1	ignore-filters

.1.3.6.1.4.1.12740.18.1.3.1.24

eqlNASContainerRehydrateOnReadEnabled

Enable or disable rehydrate on read in a data reduction disabled nas container

EQLAPPLIANCE-MIBeqlApplianceIndex eqlNASContainerIndex eqlNASContainerUniqueIDType

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.12740.18.1.3.1.25

eqlNASContainerUniqueIDTable

table

.1.3.6.1.4.1.12740.18.1.3.2 · 1 row entry · 3 columns

Open in standard view

Uses the equallogic variant from /opt/observium/mibs/equallogic.

Command help

Walk eqlNASContainerUniqueIDTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLNAS-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLNAS-MIB::eqlNASContainerUniqueIDTable'

EqualLogic-Dynamic Unique ID table.
This table is used to retrieve Unique ID values when creating new objects.
TimeoutAll:60

eqlNASContainerUniqueIDEntry row .1.3.6.1.4.1.12740.18.1.3.2.1

An entry (row) containing unique ID information.

Indexes

Column Syntax OID

eqlNASContainerUniqueIDType

Indicates the type of the id. For now only Snapshot and quota Ids are needed for at the container scope

Enumeration

Enumerated Values:

1	snapshot
2	quota

.1.3.6.1.4.1.12740.18.1.3.2.1.1

eqlNASContainerUniqueIDValueLen

Length of the value represented by column eqlNASContainerUniqueIDValue

eqlNASContainerUniqueIDValue

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.18.1.3.2.1.2

Value of eqlNASContainerUniqueIDType represented in network byte order.

OctetString

Constraints:
range: 255-255

.1.3.6.1.4.1.12740.18.1.3.2.1.3

eqlNASSnapshotTable

table

.1.3.6.1.4.1.12740.18.1.3.3 · 1 row entry · 7 columns

Open in standard view

Uses the equallogic variant from /opt/observium/mibs/equallogic.

Command help

Walk eqlNASSnapshotTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLNAS-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLNAS-MIB::eqlNASSnapshotTable'

EqualLogic-Dynamic snapshot Table
This table contains a list of snapshots associated with the associated container.
TimeoutAll:60

eqlNASSnapshotEntry row .1.3.6.1.4.1.12740.18.1.3.3.1

An entry (row) containing snap shot info.

Indexes

EQLAPPLIANCE-MIBeqlApplianceIndex eqlNASContainerIndex eqlNASSnapshotIndex

Column Syntax OID

eqlNASSnapshotIndex

This field specifies a unique index which identifies a NAScontainer SnapShot.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.18.1.3.3.1.1

eqlNASSnapshotRowStatus

The rowstatus....

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.12740.18.1.3.3.1.2

eqlNASSnapshotName

This field specifies the friendly name used to identify a SnapShot.
The name is auto-generated based on the NAScontainer name, optionally it can be
provided or changed after the fact by the administrator.

OctetStringr/w

Constraints:
range: 1-230

.1.3.6.1.4.1.12740.18.1.3.3.1.3

eqlNASSnapshotSize

This field specifies the amount of space in MB a SnapShot consumes.
Note: Deleting the SnapShot is not guaranteed to return the space specified,
since a single block can be associated with multiple SnapShots. This value…

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.12740.18.1.3.3.1.4

eqlNASSnapshotTimestamp

EQL-SECONDARY-KEY
This field specifies the creation date/time for snapshot.
Time is represented as the time in seconds since 00:00:00 UTC, 1970-01-01.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.18.1.3.3.1.5

eqlNASSnapshotRollBack

True indicates the NASContainer is to be resotred to the state of this Snapshot.

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.12740.18.1.3.3.1.6

eqlNASSnapshotPolicyIdx

This value identifies the snapshot policy for this snapshot.

EQLAPPLIANCE-MIBeqlApplianceIndex eqlNASContainerIndex eqlNASSnapshotPolicyIndex

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.12740.18.1.3.3.1.7

eqlNASSnapshotPolicyTable

table

.1.3.6.1.4.1.12740.18.1.3.4 · 1 row entry · 17 columns

Open in standard view

Uses the equallogic variant from /opt/observium/mibs/equallogic.

Command help

Walk eqlNASSnapshotPolicyTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLNAS-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLNAS-MIB::eqlNASSnapshotPolicyTable'

EqualLogic-Persistent NAS SnapSnot Policy Table.
TimeoutAll:60

eqlNASSnapshotPolicyEntry row .1.3.6.1.4.1.12740.18.1.3.4.1

An entry (row) containing NAS snapshot scheduling policy
information.The policy determines when to create
snapshot(s) of a appliance container.

Indexes

Column Syntax OID

eqlNASSnapshotPolicyIndex

This value uniquely identifies the snapshot policies for a container.

eqlNASSnapshotPolicyRowStatus

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.12740.18.1.3.4.1.1

This value is used to manage the conceptual row.

eqlNASSnapshotPolicyMaxKeep

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.12740.18.1.3.4.1.2

eqlNASSnapshotPolicyName

This value specifies user friendly name for the policy.
It is unique within the context of a volume. Spaces are not allowed.

OctetStringr/w

Constraints:
range: 1-64

.1.3.6.1.4.1.12740.18.1.3.4.1.3

The value of this object determines the maximum no of snapshots
created by this policy that can exist at a given time. When number
of snapshots created by this policy reaches this value, for creating
a new snapshot olde…

snapshotsInteger32r/w

Constraints:
range: 1-2147483647

.1.3.6.1.4.1.12740.18.1.3.4.1.6

eqlNASSnapshotPolicyType

The value of this object determines the basic type of this policy.
Except when set to once, the effective repetition period of the
policy is determined using the value of this object along with
the value of eqlNASSnaps…

Enumerationr/w

Enumerated Values:

1	once
2	daily
3	weekly
4	monthly
5	hourly

.1.3.6.1.4.1.12740.18.1.3.4.1.7

eqlNASSnapshotPolicyRepeatFactor

The value of this object along with eqlNASSnapshotPolicyType
determines the effective repetition interval for this policy.
The valid values are

PolicyType RepeatFactor
once …

Integer32r/w

Constraints:
range: 1-2147483647

.1.3.6.1.4.1.12740.18.1.3.4.1.8

eqlNASSnapshotPolicyStartTime

The value of this object represents the time to start creating
snapshot(s) within a day expressed as number of minutes
from 12:00AM. The maximum value for this column is 24*60-1 which
represents 11:59PM.

minutesInteger32r/w

Constraints:
range: 0-1439

.1.3.6.1.4.1.12740.18.1.3.4.1.9

eqlNASSnapshotPolicyEndTime

The value of this object represents the time to stop creating
snapshot(s) within a day expressed as number of minutes
from 12:00AM. The maximum value for this column is 24*60-1 which
represents 11:59PM.
…

minutesInteger32r/w

Constraints:
range: 0-1439

.1.3.6.1.4.1.12740.18.1.3.4.1.10

eqlNASSnapshotPolicyTimeFrequency

The value of this object determines how frequent snapshots must be
taken between start time and end time. This value doesn't have
significance when policy type is set to once. For other policytypes,
the value of end t…

minutesInteger32r/w

Constraints:
range: 0-1439

.1.3.6.1.4.1.12740.18.1.3.4.1.11

eqlNASSnapshotPolicyStartDate

The value of this object determines the date from which the policy
will be active. By default, this is the policy creation date.
The value is expressed as number of days since epoch.

daysInteger32r/w

Constraints:
range: 0-2147483647

.1.3.6.1.4.1.12740.18.1.3.4.1.12

eqlNASSnapshotPolicyEndDate

The value of this object determines the date after which the policy
will be inactive.It doesnt have significance when policy type
is once. Default value is the mamixum value allowed. When set to maximum
value, the polic…

daysInteger32r/w

Constraints:
range: 0-2147483647

.1.3.6.1.4.1.12740.18.1.3.4.1.13

eqlNASSnapshotPolicyWeekMask

The value of this column is significant only if policytype is
set to weekly or monthly. When the value is 0x7fffffff, it
represents a special meaning to the value of occurence. See
the description for occurence below.…

eqlNASSnapshotPolicyMonthMask

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.12740.18.1.3.4.1.14

The value of this column is currently not being used.

eqlNASSnapshotPolicyOccurence

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.12740.18.1.3.4.1.15

The value of this column is significant only if the policy type is
set to monthly.

If weekmask is set to 0x7fffffff, the value of this column represents
the occurence of a day with in a month. Example:If …

eqlNASSnapshotPolicyReplication

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.12740.18.1.3.4.1.17

When a row is created with this object set to a non-zero value, and
a replication relationship has been configured for the base
volume, the snapshots created will be queued to be replicated to the
remote location as def…

EQLVOLUME-MIBSiteIndexOrZeror/w

Type Constraints:
range: 0..2147483647

.1.3.6.1.4.1.12740.18.1.3.4.1.18

eqlNASSnapshotPolicyAdminStatus

When disabled, the schedule will stop creating snapshots until re-enabled.

Enumerationr/w

Enumerated Values:

0	enable
1	disable

.1.3.6.1.4.1.12740.18.1.3.4.1.19

eqlNASSnapshotPolicyCategory

Set to optimization-policy, if the schedule is for data reduction. Set to optimization-default-policy if the
schedule is default data reduction policy. Default data reduction policy is created automatically and not
allo…

Enumerationr/w

Enumerated Values:

0	snapshot-replication-policy
1	optimization-policy
2	optimization-default-policy

.1.3.6.1.4.1.12740.18.1.3.4.1.20

eqlNASSnapshotPolicyStatusTable

table

.1.3.6.1.4.1.12740.18.1.3.5 · 1 row entry · 2 columns

Open in standard view

Uses the equallogic variant from /opt/observium/mibs/equallogic.

Command help

Walk eqlNASSnapshotPolicyStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLNAS-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLNAS-MIB::eqlNASSnapshotPolicyStatusTable'

EqualLogic-Dynamic NAS SnapSnot Policy Table.
TimeoutAll:60

eqlNASSnapshotPolicyStatusEntry row .1.3.6.1.4.1.12740.18.1.3.5.1

An entry containing NAS snapshot scheduling policy
information.

Indexes

No indexes recorded

Column Syntax OID

eqlNASSnapshotPolicyStatusNextCreate

The value of this column represents number of seconds since epoch
at which the next snapshot by this policy is going to be created.

eqlNASSnapshotPolicyStatusOperStatus

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.18.1.3.5.1.1

The value of this column represents the current operational status of this policy.
The policy status is set to expired after end date. The policy status is set to active
for optimization policies which are currently run…

Enumeration

Enumerated Values:

0	enabled
1	disabled
2	expired
3	active

.1.3.6.1.4.1.12740.18.1.3.5.1.2

eqlNASQuotaTable

table

.1.3.6.1.4.1.12740.18.1.3.6 · 1 row entry · 6 columns

Open in standard view

Uses the equallogic variant from /opt/observium/mibs/equallogic.

Command help

Walk eqlNASQuotaTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLNAS-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLNAS-MIB::eqlNASQuotaTable'

EqualLogic-Dynamic quota Table
This table contains a list of quotas associated with the associated container.
TimeoutAll:60

eqlNASQuotaEntry row .1.3.6.1.4.1.12740.18.1.3.6.1

An entry (row) containing quota info.

Indexes

EQLAPPLIANCE-MIBeqlApplianceIndex eqlNASContainerIndex eqlNASQuotaTargetType eqlNASQuotaTargetName

Column Syntax OID

eqlNASQuotaRowStatus

The rowstatus....

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.12740.18.1.3.6.1.1

eqlNASQuotaTargetType

Type of target for this quota definition row

Enumerationr/w

Enumerated Values:

0	unused
1	allofgroup
2	anyuseringroup
3	user
4	defaultuser
5	defaultgroup
6	allquotas

.1.3.6.1.4.1.12740.18.1.3.6.1.2

eqlNASQuotaTargetName

The name of the user or group as indicated by the target type. AD groups can be 129 bytes

OctetStringr/w

Constraints:
range: 1-129

.1.3.6.1.4.1.12740.18.1.3.6.1.3

eqlNASQuotaWarnLimit

This field specifies the amount of space in MB at which an alert is generated.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.12740.18.1.3.6.1.4

eqlNASQuotaHardLimit

This field specifies the amount of space in MB at which writes are disallowed.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.18.1.3.6.1.5

eqlNASQuotaUsage

This field specifies the amount of space in MB currently in use by targetname.

EQLAPPLIANCE-MIBeqlApplianceIndex eqlNASContainerIndex eqlNASQuotaUsageTargetType eqlNASQuotaUsageTargetName

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.12740.18.1.3.6.1.6

eqlNASQuotaUsageTable

table

.1.3.6.1.4.1.12740.18.1.3.7 · 1 row entry · 4 columns

Open in standard view

Uses the equallogic variant from /opt/observium/mibs/equallogic.

Command help

Walk eqlNASQuotaUsageTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLNAS-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLNAS-MIB::eqlNASQuotaUsageTable'

EqualLogic-Dynamic quota Table
This table contains a list of quota usages associated with the associated container.
TimeoutAll:60

eqlNASQuotaUsageEntry row .1.3.6.1.4.1.12740.18.1.3.7.1

An entry (row) containing quota info.

Indexes

Column Syntax OID

eqlNASQuotaUsageRowStatus

The rowstatus....

SNMPv2-TCRowStatus

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.12740.18.1.3.7.1.1

eqlNASQuotaUsageTargetType

Type of target for this quota definition row

Enumeration

Enumerated Values:

0	unused
1	allofgroup
2	anyuseringroup
3	user

.1.3.6.1.4.1.12740.18.1.3.7.1.2

eqlNASQuotaUsageTargetName

The name of the user or group as indicated by the target type. AD groups can be 129 bytes

OctetString

Constraints:
range: 1-129

.1.3.6.1.4.1.12740.18.1.3.7.1.3

eqlNASQuotaUsageMB

This field specifies the amount of space in MB currently in use by targetname.

EQLAPPLIANCE-MIBeqlApplianceIndex eqlNASContainerIndex eqlNASGroupQuotaEffectiveRuleTargetName

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.12740.18.1.3.7.1.4

eqlNASGroupQuotaEffectiveRuleTable

table

.1.3.6.1.4.1.12740.18.1.3.8 · 1 row entry · 6 columns

Open in standard view

Uses the equallogic variant from /opt/observium/mibs/equallogic.

Command help

Walk eqlNASGroupQuotaEffectiveRuleTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLNAS-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLNAS-MIB::eqlNASGroupQuotaEffectiveRuleTable'

EqualLogic-Dynamic quota Table
This table contains a list of group quota effective rules associated with the associated container.
TimeoutAll:60

eqlNASGroupQuotaEffectiveRuleEntry row .1.3.6.1.4.1.12740.18.1.3.8.1

An entry (row) containing quota info.

Indexes

Column Syntax OID

eqlNASGroupQuotaEffectiveRuleTargetName

The name of the group. AD groups can be 129 bytes

OctetString

Constraints:
range: 1-129

.1.3.6.1.4.1.12740.18.1.3.8.1.1

eqlNASGroupQuotaEffectiveRuleRowStatus

The rowstatus....

SNMPv2-TCRowStatus

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.12740.18.1.3.8.1.2

eqlNASGroupQuotaEffectiveRuleSoftLimit

This is the amount of used space that triggers user alerts

eqlNASGroupQuotaEffectiveRuleHardLimit

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.12740.18.1.3.8.1.3

This field specifies the amount of space in MB at which writes are disallowed.

eqlNASGroupQuotaEffectiveRuleSoftLimitEnabled

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.12740.18.1.3.8.1.4

Specifies whether alerts based on softlimit are enabled.

eqlNASGroupQuotaEffectiveRuleHardLimitEnabled

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.12740.18.1.3.8.1.5

This field specifies whether hard limit is enforced

EQLAPPLIANCE-MIBeqlApplianceIndex eqlNASContainerIndex eqlNASUserQuotaEffectiveRuleTargetName

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.12740.18.1.3.8.1.6

eqlNASUserQuotaEffectiveRuleTable

table

.1.3.6.1.4.1.12740.18.1.3.9 · 1 row entry · 11 columns

Open in standard view

Uses the equallogic variant from /opt/observium/mibs/equallogic.

Command help

Walk eqlNASUserQuotaEffectiveRuleTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLNAS-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLNAS-MIB::eqlNASUserQuotaEffectiveRuleTable'

EqualLogic-Dynamic quota Table
This table contains a list of user quota effective rules associated with the associated container.
TimeoutAll:60

eqlNASUserQuotaEffectiveRuleEntry row .1.3.6.1.4.1.12740.18.1.3.9.1

An entry (row) containing quota info.

Indexes

Column Syntax OID

eqlNASUserQuotaEffectiveRuleTargetName

The name of the user.

OctetString

Constraints:
range: 1-129

.1.3.6.1.4.1.12740.18.1.3.9.1.1

eqlNASUserQuotaEffectiveRuleRowStatus

The rowstatus....

SNMPv2-TCRowStatus

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.12740.18.1.3.9.1.2

eqlNASUserQuotaEffectiveRuleUserSoftLimit

This is the amount of used space that triggers user alerts

eqlNASUserQuotaEffectiveRuleUserHardLimit

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.12740.18.1.3.9.1.3

This field specifies the amount of space in MB at which writes are disallowed.

eqlNASUserQuotaEffectiveRuleGroupName

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.12740.18.1.3.9.1.4

The name of the primary group of the user

OctetString

Constraints:
range: 1-129

.1.3.6.1.4.1.12740.18.1.3.9.1.5

eqlNASUserQuotaEffectiveRuleGroupSoftLimit

This is the amount of used space that triggers user alerts based on primary group's warn level

eqlNASUserQuotaEffectiveRuleGroupHardLimit

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.12740.18.1.3.9.1.6

This field specifies the amount of space in MB at which writes are disallowed based on primary group's hard limit.

eqlNASUserQuotaEffectiveRuleUserSoftLimitEnabled

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.12740.18.1.3.9.1.7

Specifies whether alerts based on user softlimit are enabled.

eqlNASUserQuotaEffectiveRuleUserHardLimitEnabled

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.12740.18.1.3.9.1.8

This field specifies whether user hard limit is enforced

eqlNASUserQuotaEffectiveRuleGroupSoftLimitEnabled

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.12740.18.1.3.9.1.9

Specifies whether alerts based on primary group's softlimit are enabled.

eqlNASUserQuotaEffectiveRuleGroupHardLimitEnabled

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.12740.18.1.3.9.1.10

This field specifies whether primary group's hard limit is enforced

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.12740.18.1.3.9.1.11

eqlNASApplianceDefaultCfgTable

table

.1.3.6.1.4.1.12740.18.1.4 · 1 row entry · 30 columns

Open in standard view

Uses the equallogic variant from /opt/observium/mibs/equallogic.

Command help

Walk eqlNASApplianceDefaultCfgTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLNAS-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLNAS-MIB::eqlNASApplianceDefaultCfgTable'

EqualLogic-Dynamic (semi) Appliance Table.
This table contains a list of NAS Appliance default configurations for containers the group is managing.
TimeoutAll:60

eqlNASApplianceDefaultCfgEntry row .1.3.6.1.4.1.12740.18.1.4.1

An entry (row) containing NAS Container Status info.

Indexes

eqlNASApplianceConfigUsedSpaceAlert

Column Syntax OID

Specified as a percentage of NAS container size as a default for containers in this nas-group.
This is the amount of used space that triggers user alerts

eqlNASApplianceConfigSnapSpaceAlert

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.18.1.4.1.1

Specified as a percentage of NAS container size as a default for containers in this nas-group.
The is the amount of space consumed by snapshots at which user alerts are triggered

eqlNASApplianceConfigSnapHardQuota

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.18.1.4.1.2

Specified as a percentage of NAS container size as a default for containers in this nas-group.
This is the threshold that triggers auto-deletion of snapshots. Oldest first.

eqlNASApplianceContainerUnixFilePerms

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.18.1.4.1.3

Define the default UNIX permissions of new files created from Windows clients. Default value is 0744

eqlNASApplianceContainerUnixDirPerms

.1.3.6.1.4.1.12740.18.1.4.1.4

Define the default UNIX permissions of new directories created from Windows clients. Default value is 0755

eqlNASApplianceContainerFileSecurity

.1.3.6.1.4.1.12740.18.1.4.1.5

Used to define how the system will maintain and verify file access security.

Enumerationr/w

Enumerated Values:

1	mixed
2	ntfs
3	unix

.1.3.6.1.4.1.12740.18.1.4.1.6

eqlNASApplianceDefaultUserQuota

Default quota per user when quotas are enabled on NAS Containers.

eqlNASApplianceDefaultUserQuotaAlert

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.18.1.4.1.7

Specified as a percentage of default group quota as a default for containers in this nas-group.
This is the amount of used space that triggers user alerts

eqlNASApplianceDefaultGroupQuota

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.18.1.4.1.8

Default quota per group when quotas are enabled on NAS Containers.

eqlNASApplianceDefaultGroupQuotaAlert

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.18.1.4.1.9

Specified as a percentage of default group quota as a default for containers in this nas-group.
This is the amount of used space that triggers user alerts

eqlNASApplianceDefaultCIFSAllowGuestAccess

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.18.1.4.1.10

Choose whether to allow unknown users to access the share as guests.

eqlNASApplianceCIFSAuthenticationMode

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.12740.18.1.4.1.11

Enumerationr/w

Enumerated Values:

1	allow-everyone
2	active-directory
3	local-users

.1.3.6.1.4.1.12740.18.1.4.1.12

eqlNASApplianceDefaultCIFSLockEnforcement

Define the types of locks that the system will enforce, in addition to share locks which are always enforced. Byte range locks allow applications to ensure data integrity. Opportunistic locks (oplocks) increase the ef…

Enumerationr/w

Enumerated Values:

0	all-locks
1	share-locks-op-locks
2	only-share-locks

.1.3.6.1.4.1.12740.18.1.4.1.13

eqlNASApplianceNFSExportReadWrite

Define the access rights for the NFS export. If the access rights for the NFS export are stricter than those defined for a specific file, the file's access rights will be overridden by those of the NFS export.

Enumerationr/w

Enumerated Values:

1	read-write
2	read-only

.1.3.6.1.4.1.12740.18.1.4.1.14

eqlNASApplianceNFSExportTrustedUsers

Define which users are trusted. Other users will be identified as guests.

Enumerationr/w

Enumerated Values:

1	all-except-root
2	none
3	all

.1.3.6.1.4.1.12740.18.1.4.1.15

eqlNASApplianceAccessTimeManagementGranularity

Access time management granularity.

Enumerationr/w

Enumerated Values:

0	disabled
1	always
2	everyFiveMinutes
3	hourly
4	daily
5	weekly

.1.3.6.1.4.1.12740.18.1.4.1.16

eqlNASApplianceOptimizationEnabled

Enable or disable optimization. Reserved for future use. Not supported currently.

eqlNASApplianceDedupMethodType

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.12740.18.1.4.1.17

Dedup method to use on this file system when optimization is enabled. Reserved for future use. Currently not supported.

Enumerationr/w

Enumerated Values:

1	variable-chunk
2	object

.1.3.6.1.4.1.12740.18.1.4.1.18

eqlNASApplianceCompressionEnabled

enable or disable compression. Restricted by the type of license. Reserved for future use. Not supported currently.

eqlNASApplianceModificationTimeFilter

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.12740.18.1.4.1.19

Exclude files modified less than the specified number of days before. 30 to 365 days.

Integer32r/w

Constraints:
range: 30-365

.1.3.6.1.4.1.12740.18.1.4.1.20

eqlNASApplianceAccessTimeFilter

Exclude files accessed less than the specified number of days before. 30 to 365 days.

Integer32r/w

Constraints:
range: 30-365

.1.3.6.1.4.1.12740.18.1.4.1.21

eqlNASApplianceExcludeFilesByNamePatterndeprecated

Regular expression identifying the file name pattern to exclude from optimization. Empty string means no exclusion.

OctetStringr/w

Constraints:
range: 1-256

.1.3.6.1.4.1.12740.18.1.4.1.22

eqlNASApplianceDefaultCIFSAntivirusEnabled

Default which determines whether the antivirus service is disabled or enabled for a CIFS share at the time of creation.

EQLVOLUME-MIBStatusDisabledDefaultr/w

Type Values:

0	disabled
1	enabled

.1.3.6.1.4.1.12740.18.1.4.1.23

eqlNASApplianceDefaultCIFSAntivirusPolicy

Default which determines the action to be taken on a virus-infected file. This field is deprecated and unsupported. The value now always will be quarantine(0).

Enumerationr/w

Enumerated Values:

0	quarantine
1	do-nothing
2	remove

.1.3.6.1.4.1.12740.18.1.4.1.24

eqlNASApplianceDefaultCIFSAntivirusExtensions

Default which determines which files should be / should not be scanned for viruses. This is a comma-separated list. The value of the next field determines if the files with the corresponding extensions will be scanned o…

OctetStringr/w

Constraints:
range: 0-255

.1.3.6.1.4.1.12740.18.1.4.1.25

eqlNASApplianceDefaultCIFSAntivirusExtensionsPolicy

Default which determines whether the files whose extensions match with those specified in the field above should be scanned OR should not be scanned for viruses. This field is deprecated and unsupported. The value now…

Enumerationr/w

Enumerated Values:

0	exclude
1	include

.1.3.6.1.4.1.12740.18.1.4.1.26

eqlNASApplianceDefaultCIFSAntivirusExcludeDirPaths

Default which determines the list of the directory paths which should not be scanned for viruses. It is a comma-separated list. Paths can contain wildcards * and ?. NOTE: * will not match several path components.

OctetStringr/w

Constraints:
range: 0-512

.1.3.6.1.4.1.12740.18.1.4.1.27

eqlNASApplianceDefaultCIFSAntivirusLargeFileSize

Default which determines the largest file size in MB which is sent to Antivirus server for scanning on the fly. The files larger than the specified size are not scanned. Access to these large files will be allowed or de…

eqlNASApplianceDefaultCIFSAntivirusLargeFileOpen

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.18.1.4.1.28

Default which determines if CIFS clients are allowed to open files larger than the value defined by AntivirusLargeFileSize.

Enumerationr/w

Enumerated Values:

0	deny
1	allow

.1.3.6.1.4.1.12740.18.1.4.1.29

eqlNASApplianceDefaultNFSExportsFileId32bit

Default option to trigger 32-bit compatibility mode for NFS export. When enabled, reported FileId (inode) information contains only lower 32-bits set. When disabled, reported FileId (inode) information contains full 64-…

Enumerationr/w

Enumerated Values:

0	enabled
1	disabled

.1.3.6.1.4.1.12740.18.1.4.1.30

eqlNASContainerStatusTable

table

.1.3.6.1.4.1.12740.18.1.5 · 1 row entry · 12 columns

Open in standard view

Uses the equallogic variant from /opt/observium/mibs/equallogic.

Command help

Walk eqlNASContainerStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLNAS-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLNAS-MIB::eqlNASContainerStatusTable'

EqualLogic-Dynamic NAS Container Table.
This table contains a list of NAS Appliance configurations for containers the group is managing.
TimeoutAll:60

eqlNASContainerStatusEntry row .1.3.6.1.4.1.12740.18.1.5.1

An entry (row) containing NAS Container Status info.

Indexes

EQLAPPLIANCE-MIBeqlApplianceIndex eqlNASContainerIndex

Column Syntax OID

eqlNASContainerStatusConnections

eqlNASContainerStatusUsedSpace

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.18.1.5.1.1

Space used by NAS Containers including both snapshot space and filesystem usage)

eqlNASContainerStatusSnapshotSpace

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.18.1.5.1.2

Amount of used space in MB used by NAS Containers for storage of snapshot data. This is not snapshot reserve but rather snapshot reserve space currently in use. Initially this value would be 0.

eqlNASContainerStatusNumNFSExports

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.18.1.5.1.3

eqlNASContainerStatusNumCIFSShares

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.18.1.5.1.4

eqlNASContainerStatusAllocatedSpace

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.18.1.5.1.5

Amount of space in MB allocated by NAS Containers

eqlNASContainerStatusFreeSpace

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.18.1.5.1.6

Amount of total free space in MB including both snapshot and filesystem

eqlNASContainerStatusNumOfSnapshots

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.18.1.5.1.7

Number of snapshots

eqlNASContainerStatusOptimizationSpaceSavings

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.18.1.5.1.8

Amount of space saved in MB due to applying optimization

eqlNASContainerStatusOptimized

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.18.1.5.1.9

True if optimization was enabled once, false otherwise

eqlNASContainerStatusReplState

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.12740.18.1.5.1.10

This column gives information about the replication
status of this FileSystem. Standalone means the filesystem
is not being replicated. Source means this filesystem is a
source to a remote filesystem. Destination mean…

Enumeration

Enumerated Values:

0	standalone
1	source
2	destination
3	promoted
4	not-available

.1.3.6.1.4.1.12740.18.1.5.1.11

eqlNASContainerStatusNextSnapshotID

This column denotes the next SnapshotID avaiable for this particular container.

EQLAPPLIANCE-MIBeqlApplianceIndex eqlNASContainerIndex eqlNASApplianceNFSExportName

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.18.1.5.1.12

eqlNASApplianceNFSExportsTable

table

.1.3.6.1.4.1.12740.18.1.6 · 1 row entry · 11 columns

Open in standard view

Uses the equallogic variant from /opt/observium/mibs/equallogic.

Command help

Walk eqlNASApplianceNFSExportsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLNAS-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLNAS-MIB::eqlNASApplianceNFSExportsTable'

Equallogic-Dynamic NAS NFS Exports Table.
This table contains a list of NFS exports configuration entry.
TimeoutAll:60

eqlNASApplianceNFSExportsEntry row .1.3.6.1.4.1.12740.18.1.6.1

An entry (row) containing NFS exports configuration.

Indexes

Column Syntax OID

eqlNASApplianceNFSExportName

Contains only letters, digits and underscores. Must begin with a letter.

OctetString

Constraints:
range: 1-64

.1.3.6.1.4.1.12740.18.1.6.1.1

eqlNASApplianceNFSExportsRowStatus

Rowstatus variable used to manage this conceptual row.

eqlNASApplianceNFSExportDirectory

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.12740.18.1.6.1.2

Full path to the Directory to be exported.

OctetStringr/w

Constraints:
range: 1-512

.1.3.6.1.4.1.12740.18.1.6.1.3

eqlNASApplianceNFSAccess

Enumerationr/w

Enumerated Values:

1	read-write
2	read-only

.1.3.6.1.4.1.12740.18.1.6.1.4

eqlNASApplianceNFSLimitReportedSize

Default value is zero and it means the actual size of NFS export will be returned. When the value is non-zeo, this value will be used instead of actual NFS Export size.

eqlNASApplianceNFSAccessClientIPType

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.18.1.6.1.5

Type of eqlNASApplianceNFSAccessClientIP field.

eqlNASApplianceNFSAccessClientIP

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.12740.18.1.6.1.6

Value of this column along with eqlNASApplianceNFSAccessClientNetmask will determine access policy for clients

eqlNASApplianceNFSAccessClientNetmaskType

Type Constraints:
range: 0..255

.1.3.6.1.4.1.12740.18.1.6.1.7

Type of eqlNASApplianceNFSAccessClientNetmask field. This value must match with eqlNASApplianceNFSAccessClientIPType field.

eqlNASApplianceNFSAccessClientNetmask

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.12740.18.1.6.1.8

Value of this column along with eqlNASApplianceNFSAccessClientIP will determine access policy for clients

eqlNASApplianceNFSTrustUsers

Type Constraints:
range: 0..255

.1.3.6.1.4.1.12740.18.1.6.1.9

Trusted users who can access the NFS Export

Enumerationr/w

Enumerated Values:

1	all-except-root
2	none
3	all

.1.3.6.1.4.1.12740.18.1.6.1.10

eqlNASApplianceNFSExportsFileId32bit

Determines 32-bit compatibility mode for this NFS export. When enabled, reported FileId (inode) information contains only lower 32-bits. When disabled, reported FileId (inode) information contains full 64-bit values.

Enumerationr/w

Enumerated Values:

0	enabled
1	disabled

.1.3.6.1.4.1.12740.18.1.6.1.11

eqlNASApplianceCIFSTable

table

.1.3.6.1.4.1.12740.18.1.8 · 1 row entry · 12 columns

Open in standard view

Uses the equallogic variant from /opt/observium/mibs/equallogic.

Command help

Walk eqlNASApplianceCIFSTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLNAS-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLNAS-MIB::eqlNASApplianceCIFSTable'

Equallogic-Dynamic NAS CIFS Table.
This table contains a list of CIFS configuration entry.
TimeoutAll:60

eqlNASApplianceCIFSEntry row .1.3.6.1.4.1.12740.18.1.8.1

An entry (row) containing CIFS configuration.

Indexes

EQLAPPLIANCE-MIBeqlApplianceIndex eqlNASContainerIndex eqlNASApplianceCIFSShareName

Column Syntax OID

eqlNASApplianceCIFSShareName

Contains only letters, digits and underscores.

OctetString

Constraints:
range: 1-64

.1.3.6.1.4.1.12740.18.1.8.1.1

eqlNASApplianceCIFSRowStatus

Rowstatus variable used to manage this conceptual row.

eqlNASApplianceCIFSExportedDirectory

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.12740.18.1.8.1.2

Full Path to the directory to be exported.

OctetStringr/w

Constraints:
range: 1-512

.1.3.6.1.4.1.12740.18.1.8.1.3

eqlNASApplianceCIFSAllowGuestAccess

When set to true, guests will be allowed to access this share.

eqlNASApplianceCIFSLockEnforcement

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.12740.18.1.8.1.4

Locking enforcement policy for this CIFS Share. This software release does not support changing the locking enforcement policy. Only the default option (all-locks) is supported.

Enumerationr/w

Enumerated Values:

0	all-locks
1	no-byte-range-locks
2	only-share-locks

.1.3.6.1.4.1.12740.18.1.8.1.5

eqlNASApplianceCIFSAntivirusEnabled

When set to enabled, antivirus service will be enabled for this share. Else it will be disabled.

EQLVOLUME-MIBStatusDisabledDefaultr/w

Type Values:

0	disabled
1	enabled

.1.3.6.1.4.1.12740.18.1.8.1.6

eqlNASApplianceCIFSAntivirusPolicy

Determines the action to take when a file is found to be infected by a virus. This field is deprecated and unsupported. The value now always will be quarantine(0).

Enumerationr/w

Enumerated Values:

0	quarantine
1	do-nothing
2	remove

.1.3.6.1.4.1.12740.18.1.8.1.7

eqlNASApplianceCIFSAntivirusExtensions

Comma-separated list of the file extensions which should / should not be virus-scanned. The value of the next field i.e. eqlNASApplianceCIFSAntivirusExtensionsPolicy determines if the files with the corresponding extens…

OctetStringr/w

Constraints:
range: 0-255

.1.3.6.1.4.1.12740.18.1.8.1.8

eqlNASApplianceCIFSAntivirusExtensionsPolicy

Determines whether the files whose extensions match with those specified in the field above i.e. eqlNASApplianceCIFSAntivirusExtensions, should be scanned OR should not be scanned for viruses. This field is deprecated …

Enumerationr/w

Enumerated Values:

0	exclude
1	include

.1.3.6.1.4.1.12740.18.1.8.1.9

eqlNASApplianceCIFSAntivirusExcludeDirPaths

Comma-separated list of the directory paths which should not be scanned for viruses. Paths can contain wildcards * and ?. NOTE: * will not match several path components.

OctetStringr/w

Constraints:
range: 0-512

.1.3.6.1.4.1.12740.18.1.8.1.10

eqlNASApplianceCIFSAntivirusLargeFileSize

Determines the largest file size in MB which is sent to Antivirus server for scanning on the fly. The files larger than the specified size are not scanned. Access to these large files will be allowed or denied based on …

eqlNASApplianceCIFSAntivirusLargeFileOpen

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.18.1.8.1.11

Determines if CIFS clients are allowed to open files larger than the value defined by CIFSAntivirusLargeFileSize.

Enumerationr/w

Enumerated Values:

0	deny
1	allow

.1.3.6.1.4.1.12740.18.1.8.1.12

eqlNASContainerDirectoryOpsTable

table

.1.3.6.1.4.1.12740.18.1.9 · 1 row entry · 4 columns

Open in standard view

Uses the equallogic variant from /opt/observium/mibs/equallogic.

Command help

Walk eqlNASContainerDirectoryOpsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLNAS-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLNAS-MIB::eqlNASContainerDirectoryOpsTable'

Equallogic-Dynamic NAS Container Directory Operations Table. This table is used for directory operations.
TimeoutAll:60

eqlNASContainerDirectoryOpsEntry row .1.3.6.1.4.1.12740.18.1.9.1

An entry for directory operations.

Indexes

EQLAPPLIANCE-MIBeqlApplianceIndex eqlNASContainerIndex eqlNASContainerDirectoryOpsIndex

Column Syntax OID

eqlNASContainerDirectoryOpsIndex

This field specifies a unique index for identifying a NAS container directory ops entry.

eqlNASContainerDirectoryRowStatus

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.18.1.9.1.1

Rowstatus variable used to manage directories. Operations supported will be create and delete. Get and Getnext operations on this table will return error.

eqlNASContainerDirectoryName

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.12740.18.1.9.1.2

Full Path to the directory to be created or deleted. Ex: /home/user1. Create directory will fail if parent directory does not exist.

OctetStringr/w

Constraints:
range: 1-512

.1.3.6.1.4.1.12740.18.1.9.1.3

eqlNASContainerDirectoryCaseInsensitive

Determines whether the directory created is case insensitve or not.

Enumerationr/w

Enumerated Values:

0	yes
1	no

.1.3.6.1.4.1.12740.18.1.9.1.4

eqlNASReplSiteTable

table

.1.3.6.1.4.1.12740.18.1.10 · 1 row entry · 19 columns

Open in standard view

Uses the equallogic variant from /opt/observium/mibs/equallogic.

Command help

Walk eqlNASReplSiteTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLNAS-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLNAS-MIB::eqlNASReplSiteTable'

EqualLogic-Persistent
TimeoutAll:60

eqlNASReplSiteEntry row .1.3.6.1.4.1.12740.18.1.10.1

Indexes

EQLAPPLIANCE-MIBeqlApplianceIndex eqlNASReplSitePartnershipId

Column Syntax OID

eqlNASReplSitePartnershipId

This is the partnership Id used by Exastore to identify the partnership in the XML API

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.18.1.10.1.1

eqlNASReplSiteRowStatus

The status of the row

eqlNASReplSiteVolumeReplSiteIndex

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.12740.18.1.10.1.2

The value of eqliscsiVolumeReplSiteIndex to index into eqliscsiVolumeReplSiteTable.

EQLVOLUME-MIBSiteIndexr/w

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.12740.18.1.10.1.3

eqlNASReplSiteLocalClusterInetAddrType

The IP address type for the LocalCluster SAN VIP

INET-ADDRESS-MIBInetAddressType

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.12740.18.1.10.1.4

eqlNASReplSiteLocalClusterInetAddr

The IP address for the LocalCluster SAN VIP

INET-ADDRESS-MIBInetAddress

Type Constraints:
range: 0..255

.1.3.6.1.4.1.12740.18.1.10.1.5

eqlNASReplSiteRemoteClusterInetAddrType

The IP address type for the RemoteCluster SAN VIP

eqlNASReplSiteRemoteClusterInetAddr

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.12740.18.1.10.1.6

The IP address for the RemoteCluster SAN VIP

eqlNASReplSitePartnershipState

Type Constraints:
range: 0..255

.1.3.6.1.4.1.12740.18.1.10.1.7

This field gives the state of the partnership. enabled
means the user has enabled NAS replication for this
partnership. congiured means that we have configured
this partnership with exastore. The state will always
s…

Enumerationr/w

Enumerated Values:

0	none
1	enabled
2	configured

.1.3.6.1.4.1.12740.18.1.10.1.8

eqlNASReplSiteUserName

The replication username for the remote site. This
is only used for senind messages to spartan agent.

OctetStringr/w

Constraints:
range: 0-255

.1.3.6.1.4.1.12740.18.1.10.1.9

eqlNASReplSitePassword

The replication usernames password for the remote site.
This is only used for senind messages to spartan agent.

OctetString

Constraints:
range: 0-255

.1.3.6.1.4.1.12740.18.1.10.1.10

eqlNASReplSiteRemoteClusterName

This field specifies the partners cluster name, which is the remote eqlApplianceName.

OctetStringr/w

Constraints:
range: 1-64

.1.3.6.1.4.1.12740.18.1.10.1.11

eqlNASReplSiteAction

This column will be used to perform actions on this partnership.
The configure action will be used to configure the partnership
with Exastore. The delete action will be used to delete partnership at Exastore

Enumerationr/w

Enumerated Values:

0	none
1	configure
2	delete

.1.3.6.1.4.1.12740.18.1.10.1.12

eqlNASReplSiteRemoteUserName

The replication username at the remote site. This
is only used for senind messages to spartan agent. This is same as eqlNASApplianceReplRemoteUserName.

OctetString

Constraints:
range: 0-32

.1.3.6.1.4.1.12740.18.1.10.1.13

eqlNASReplSiteRemotePassword

The replication usernames password at the remote site.
This is only used for senind messages to spartan agent.

OctetString

Constraints:
range: 0-255

.1.3.6.1.4.1.12740.18.1.10.1.14

eqlNASReplSiteRemoteClusterId

Get this string from node.

ClusterIdTyper/w

Type Constraints:
range: 0..50

.1.3.6.1.4.1.12740.18.1.10.1.15

eqlNASReplSiteRemoteClusterMPV

The Management Protocol Version (MPV) of the remote cluster.

eqlNASReplSiteRemoteNetworkAddrType

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.18.1.10.1.16

The IP address type (IPv4/IPv6) for the network ID
of the remote cluster. NAS replication traffic is sent
to this network. This is used for creating route to
reach the remote cluster.

eqlNASReplSiteRemoteNetworkAddr

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.12740.18.1.10.1.17

The network address/ID of the remote cluster.
The network address/ID to reach the remote cluster
NAS replication traffic is sent to this network.

eqlNASReplSiteRemoteNetworkMask

Type Constraints:
range: 0..255

.1.3.6.1.4.1.12740.18.1.10.1.18

The netmask of the remote network.
NAS replication traffic is sent to this network.
This is used for creating route to reach the
remote cluster.

EQLAPPLIANCE-MIBeqlApplianceIndex eqlNASContainerIndex eqlNASReplSitePartnershipId eqlNASReplicationId

Type Constraints:
range: 0..255

.1.3.6.1.4.1.12740.18.1.10.1.19

eqlNASReplicationTable

table

.1.3.6.1.4.1.12740.18.1.11 · 1 row entry · 14 columns

Open in standard view

Uses the equallogic variant from /opt/observium/mibs/equallogic.

Command help

Walk eqlNASReplicationTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLNAS-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLNAS-MIB::eqlNASReplicationTable'

EqualLogic-Dynamic
TimeoutAll:60

eqlNASReplicationEntry row .1.3.6.1.4.1.12740.18.1.11.1

Indexes

Column Syntax OID

eqlNASReplicationId

This is the replication Id used by Exastore to identify the replication in the XML API

eqlNASReplicationRowStatus

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.18.1.11.1.1

The status of the row

eqlNASReplicationLastRecoveryTime

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.12740.18.1.11.1.2

This field specifies the date/time of the last recovery snapshot
that has been copied. Time is represented as the time in seconds
since 00:00:00 UTC, 1970-01-01.

eqlNASReplicationNextRecoveryTime

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.18.1.11.1.3

This field specifies the date/time of the next recovery snapshot
that will be copied. Time is represented as the time in seconds
since 00:00:00 UTC, 1970-01-01.

eqlNASReplicationSourceClusterName

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.18.1.11.1.4

This field specifies the source cluster name, which is the
eqlApplianceName of the cluster hosting the source FS.

OctetString

Constraints:
range: 1-64

.1.3.6.1.4.1.12740.18.1.11.1.5

eqlNASReplicationSourceFSId

Unique Identifier for the source FileSystem. This is the FSid.

eqlNASReplicationSourceFSName

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.18.1.11.1.6

Name used to identify the source NAS Container. Contains only
letters, digits and underscores. Must begin with either letter
or an underscore.

OctetStringr/w

Constraints:
range: 1-230

.1.3.6.1.4.1.12740.18.1.11.1.7

eqlNASReplicationDestClusterName

This field specifies the destination cluster name, which is the
eqlApplianceName of the cluster hosting the destination FS.

OctetString

Constraints:
range: 1-64

.1.3.6.1.4.1.12740.18.1.11.1.8

eqlNASReplicationDestFSId

Unique Identifier for the destination FileSystem. This is the FSid.

eqlNASReplicationDestFSName

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.18.1.11.1.9

Name used to identify the destination NAS Container. Contains
only letters, digits and underscores. Must begin with either
letter or an underscore.

OctetStringr/w

Constraints:
range: 1-230

.1.3.6.1.4.1.12740.18.1.11.1.10

eqlNASReplicationStatus

The status of this replication relationship.

eqlNASReplicationMinToComplete

Type Values:

0	unknown
1	idle
2	active
3	waitingretry
4	failed
5	paused
6	cancelled
7	resuming
8	deleting
9	pausing
10	finished
11	cancelling
12	promoted
13	promoting
14	idlewaittoschedule
15	demoting

.1.3.6.1.4.1.12740.18.1.11.1.11

Minutes left in completion of the current replication process.

eqlNASReplicationTransferredPer

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.18.1.11.1.12

Provides a percent transferred for the current replication process.

%SNMPv2-SMIUnsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.18.1.11.1.13

eqlNASReplicationAction

Use this column to perform actions on this replication relationship.

Enumerationr/w

Enumerated Values:

0	none
1	replicate
2	pause
3	resume
4	cancel
5	demote
6	promote
7	force-promote
8	delete
9	force-delete
100	outbound-delete
101	outbound-force-delete
102	inbound-delete
103	inbound-promote
104	inbound-promote-restore-cfg
105	inbound-promote-keep-demote
106	inbound-promote-keep-demote-restore-cfg
107	inbound-delete-failback
108	inbound-delete-failback-restore-cfg
109	restore-cfg

.1.3.6.1.4.1.12740.18.1.11.1.14

eqlNASReplPartnerInfoMapTable

table

.1.3.6.1.4.1.12740.18.1.12 · 1 row entry · 9 columns

Open in standard view

Uses the equallogic variant from /opt/observium/mibs/equallogic.

Command help

Walk eqlNASReplPartnerInfoMapTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLNAS-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLNAS-MIB::eqlNASReplPartnerInfoMapTable'

EqualLogic-Dynamic
This table is used to get the NAS cluster name for the replsite provided.

eqlNASReplPartnerInfoMapEntry row .1.3.6.1.4.1.12740.18.1.12.1

Indexes

EQLAPPLIANCE-MIBeqlApplianceIndex EQLVOLUME-MIBeqliscsiVolumeReplSiteIndex

Column Syntax OID

eqlNASReplPartnerInfoMapRowStatus

The status of the row

eqlNASReplPartnerInfoMapClusterName

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.12740.18.1.12.1.1

This field specifies the partners cluster name, which is the remotes eqlApplianceName.

OctetStringr/w

Constraints:
range: 1-64

.1.3.6.1.4.1.12740.18.1.12.1.2

eqlNASReplPartnerInfoMapClusterSanVIPType

Type of eqlNASReplPartnerInfoMapClusterSanVIP field.

eqlNASReplPartnerInfoMapClusterSanVIP

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.12740.18.1.12.1.3

Value of this column holds the SAN VIP of the remote cluster

eqlNASReplPartnerInfoMapClusterId

Type Constraints:
range: 0..255

.1.3.6.1.4.1.12740.18.1.12.1.4

String containing local cluster Id. It should be unique within the network.
It is generated by IDC code.

ClusterIdType

Type Constraints:
range: 0..50

.1.3.6.1.4.1.12740.18.1.12.1.5

eqlNASReplPartnerInfoMapClusterMPV

The Management Protocol Version (MPV) of the cluster (usually remote).

eqlNASReplPartnerInfoMapNetworkAddrType

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.18.1.12.1.6

Type (IPv4 or IPv6) of the network where the partner is reachable.

eqlNASReplPartnerInfoMapNetworkAddr

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.12740.18.1.12.1.7

The address/ID of the network where the partner is reachable.

eqlNASReplPartnerInfoMapNetworkMask

Type Constraints:
range: 0..255

.1.3.6.1.4.1.12740.18.1.12.1.8

The netmask of the network where the partner is reachable.

EQLAPPLIANCE-MIBeqlApplianceIndex eqlNASReplPartnerInfoMapClusterName

Type Constraints:
range: 0..255

.1.3.6.1.4.1.12740.18.1.12.1.9

eqlNASReplPartnerIdMapTable

table

.1.3.6.1.4.1.12740.18.1.13 · 1 row entry · 2 columns

Open in standard view

Uses the equallogic variant from /opt/observium/mibs/equallogic.

Command help

Walk eqlNASReplPartnerIdMapTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLNAS-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLNAS-MIB::eqlNASReplPartnerIdMapTable'

EqualLogic-Dynamic
This table is used to get the NAS partnership Id for the given remote NAS cluster name.

eqlNASReplPartnerIdMapEntry row .1.3.6.1.4.1.12740.18.1.13.1

Indexes

Column Syntax OID

eqlNASReplPartnerIdMapRowStatus

The status of the row

eqlNASReplPartnerIdMapPartnershipId

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.12740.18.1.13.1.1

This is the partnership Id used by Exastore for the given eqlNASReplPartnerInfoMapClusterName.

EQLAPPLIANCE-MIBeqlApplianceIndex eqlNASContainerIndex eqlNASContainerCfgIndex

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.18.1.13.1.2

eqlNASContainerCfgTable

table

.1.3.6.1.4.1.12740.18.1.14 · 1 row entry · 6 columns

Open in standard view

Uses the equallogic variant from /opt/observium/mibs/equallogic.

Command help

Walk eqlNASContainerCfgTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLNAS-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLNAS-MIB::eqlNASContainerCfgTable'

EqualLogic-Dynamic
This table is used to restore NAS file system configuration on given filesystem (a.k.a. container).

eqlNASContainerCfgEntry row .1.3.6.1.4.1.12740.18.1.14.1

The index is composed of:
* eqlApplianceIndex - appliance index of the cluster hosting the target FS,
* eqlNASContainerIndex - container index of the target FS,
* eqlNASContainerCfgIndex - unique identifer for the c…

Indexes

Column Syntax OID

eqlNASContainerCfgIndex

Unique identifier of the configuration items set.

eqlNASContainerCfgRowStatus

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.18.1.14.1.1

The status of the row

eqlNASContainerCfgSourceClusterName

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.12740.18.1.14.1.2

This field specifies the source cluster name, which is the
eqlApplianceName of the cluster hosting the source FS.

OctetStringr/w

Constraints:
range: 1-64

.1.3.6.1.4.1.12740.18.1.14.1.3

eqlNASContainerCfgSourceFSName

Name used to identify the source NAS Container. Contains only
letters, digits and underscores. Must begin with either letter
or an underscore.

OctetStringr/w

Constraints:
range: 1-230

.1.3.6.1.4.1.12740.18.1.14.1.4

eqlNASContainerCfgModules

Bitmap of filesystem configuration modules to be restored. Identifies which filesystem configuration modules to apply to the filesystem.

Bitsr/w

Enumerated Values:

0	nfsExport
1	cifsShare
2	quotaRule
3	snapshotScheduler
4	volumeParameters
5	volumeName
6	volumeSize

.1.3.6.1.4.1.12740.18.1.14.1.5

eqlNASContainerCfgRequestId

The NAS Container configuration request id.

SNMPv2-SMICounter64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.12740.18.1.14.1.6

eqlNASFSScanTable

table

.1.3.6.1.4.1.12740.18.1.15 · 1 row entry · 1 columns

Open in standard view

Uses the equallogic variant from /opt/observium/mibs/equallogic.

Command help

Walk eqlNASFSScanTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLNAS-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLNAS-MIB::eqlNASFSScanTable'

EqualLogic-Dynamic
This table is used to control the FS-Scan throttling on Spartan appliances.

eqlNASFSScanEntry row .1.3.6.1.4.1.12740.18.1.15.1

The index is composed of:
eqlApplianceIndex - appliance index of the cluster hosting the target FS

Indexes

EQLAPPLIANCE-MIBeqlApplianceIndex eqlNASContainerIndex eqlNASReplSitePartnershipId eqlNASReplicationId eqlNASReplicationHistorySampleIndex

Column Syntax OID

eqlNASFSScanRate

This field specifies the rate of FS Scan throttling to apply to a Spartan node.

Enumerationr/w

Enumerated Values:

0	normal
1	maintenance
2	off

.1.3.6.1.4.1.12740.18.1.15.1.1

eqlNASReplicationHistoryTable

table

.1.3.6.1.4.1.12740.18.1.16 · 1 row entry · 7 columns

Open in standard view

Uses the equallogic variant from /opt/observium/mibs/equallogic.

Command help

Walk eqlNASReplicationHistoryTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLNAS-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLNAS-MIB::eqlNASReplicationHistoryTable'

EqualLogic-Dynamic
TImeoutAll:60

eqlNASReplicationHistoryEntry row .1.3.6.1.4.1.12740.18.1.16.1

NAS Replication Historical data.

Indexes

Column Syntax OID

eqlNASReplicationHistorySampleIndex

Index into list of replication history data

eqlNASReplicationHistoryStartTime

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.18.1.16.1.1

32 bit binary start time for transfer in seconds from start of Unix epoch

eqlNASReplicationHistoryEndTime

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.12740.18.1.16.1.2

32 bit binary end time for transfer in seconds from start of Unix epoch

eqlNASReplicationHistoryTransferredMb

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.12740.18.1.16.1.3

Megabytes transferred

eqlNASReplicationHistoryStatus

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.18.1.16.1.4

transfer status

eqlNASReplicationHistorySrcContainer

Type Values:

0	unknown
1	idle
2	active
3	waitingretry
4	failed
5	paused
6	cancelled
7	resuming
8	deleting
9	pausing
10	finished
11	cancelling
12	promoted
13	promoting
14	idlewaittoschedule
15	demoting

.1.3.6.1.4.1.12740.18.1.16.1.5

Name of replication source container (alias 'file system')

OctetString

Constraints:
range: 1-230

.1.3.6.1.4.1.12740.18.1.16.1.6

eqlNASReplicationHistoryDestContainer

Name of replication destination container (alias 'file system')

OctetString

Constraints:
range: 1-230

.1.3.6.1.4.1.12740.18.1.16.1.7

eqlNASApplianceAntivirusHostTable

table

.1.3.6.1.4.1.12740.18.1.17 · 1 row entry · 5 columns

Open in standard view

Uses the equallogic variant from /opt/observium/mibs/equallogic.

Command help

Walk eqlNASApplianceAntivirusHostTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLNAS-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLNAS-MIB::eqlNASApplianceAntivirusHostTable'

EqualLogic-Dynamic table used to store information of the antivirus hosts for a
NAS appliance.
TimeoutAll:60

eqlNASApplianceAntivirusHostEntry row .1.3.6.1.4.1.12740.18.1.17.1

An entry contains the antivirus host information for a NAS appliance.

Indexes

EQLAPPLIANCE-MIBeqlApplianceIndex eqlNASApplianceAntivirusHostIndex

Column Syntax OID

eqlNASApplianceAntivirusHostIndex

This field specifies an index that uniquely identifies the antivirus host
entry.

eqlNASApplianceAntivirusHostRowStatus

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.18.1.17.1.1

This field is used to manage the conceptual row entry.

eqlNASApplianceAntivirusHostName

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.12740.18.1.17.1.2

Hostname/ip address of the antivirus host.

OctetStringr/w

Constraints:
range: 1-256

.1.3.6.1.4.1.12740.18.1.17.1.3

eqlNASApplianceAntivirusHostPortNumber

Port number to be used for the antivirus service on the antivirus host.

Unsigned32r/w

Constraints:
range: 1-65535

.1.3.6.1.4.1.12740.18.1.17.1.4

eqlNASApplianceAntivirusHostTransactionState

This field denotes the transaction state of the operations on the eqlNASApplianceAntivirusHostTable.

Enumerationr/w

Enumerated Values:

0	configStart
1	configInProgress
2	configCommit
3	configStartCommit

.1.3.6.1.4.1.12740.18.1.17.1.5

eqlNASChassisTable

table

.1.3.6.1.4.1.12740.18.1.18 · 1 row entry · 6 columns

Open in standard view

Uses the equallogic variant from /opt/observium/mibs/equallogic.

Command help

Walk eqlNASChassisTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLNAS-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLNAS-MIB::eqlNASChassisTable'

EqualLogic-Dynamic NAS chassis table.
TimeoutAll:60

eqlNASChassisEntry row .1.3.6.1.4.1.12740.18.1.18.1

An entry (row) containing the NAS chassis information.

Indexes

EQLAPPLIANCE-MIBeqlApplianceIndex eqlNASChassisIndex

Column Syntax OID

eqlNASChassisIndex

The NAS Chassis index.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.18.1.18.1.1

eqlNASChassisRowStatus

This field is used to manage the conceptual row entry.

eqlNASChassisFileSystemMember

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.12740.18.1.18.1.2

eqlNASChassisName

The NAS chassis name.

OctetStringr/w

Constraints:
range: 1-256

.1.3.6.1.4.1.12740.18.1.18.1.3

eqlNASChassisRequestId

The NAS Chassis create operation request id.

SNMPv2-SMICounter64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.12740.18.1.18.1.4

The NAS Chassis filesystem participation state.

EQLAPPLIANCE-MIBeqlApplianceIndex eqlNASChassisIndex

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.12740.18.1.18.1.5

eqlNASChassisModelName

The NAS chassis model name.

OctetStringr/w

Constraints:
range: 1-32

.1.3.6.1.4.1.12740.18.1.18.1.6

eqlNASChassisStatusTable

table

.1.3.6.1.4.1.12740.18.1.19 · 1 row entry · 15 columns

Open in standard view

Uses the equallogic variant from /opt/observium/mibs/equallogic.

Command help

Walk eqlNASChassisStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLNAS-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLNAS-MIB::eqlNASChassisStatusTable'

EqualLogic-Dynamic NAS chassis status table.
TimeoutAll:60

eqlNASChassisStatusEntry row .1.3.6.1.4.1.12740.18.1.19.1

An entry (row) containing the NAS chassis status.

Indexes

Column Syntax OID

eqlNASChassisOverallStatus

The overall NAS chassis status.

eqlNASChassisOverallControllerStatus

Type Values:

0	optimal
1	not-optimal
2	critical
3	not-available

.1.3.6.1.4.1.12740.18.1.19.1.1

eqlNASChassisChassisTag

The NAS chassis tag.

OctetString

Constraints:
range: 1-32

.1.3.6.1.4.1.12740.18.1.19.1.2

eqlNASChassisModel

The NAS chassis model.

OctetString

Constraints:
range: 1-64

.1.3.6.1.4.1.12740.18.1.19.1.3

eqlNASChassisSanType

The NAS chassis san type.

EqlNASChassisSanType

Type Values:

0	iscsi
1	eql
2	fc
3	not-available

.1.3.6.1.4.1.12740.18.1.19.1.4

The NAS chassis overall controller status.

eqlNASChassisClientNetworkSpeed

Type Values:

0	optimal
1	not-optimal
2	critical
3	not-available

.1.3.6.1.4.1.12740.18.1.19.1.5

The lowest network speed among the NAS chassis client network interfaces.

eqlNASChassisBackplaneNetworkSpeed

Type Values:

0	one-gb-ethernet
1	ten-gb-ethernet
2	twenty-gb-ethernet
3	one-gb-fibre-channel
4	two-gb-fibre-channel
5	four-gb-fibre-channel
6	eight-gb-fibre-channel
7	not-available

.1.3.6.1.4.1.12740.18.1.19.1.6

The lowest network speed among the NAS chassis backplane network interfaces.

eqlNASChassisInternalNetworkSpeed

Type Values:

0	one-gb-ethernet
1	ten-gb-ethernet
2	twenty-gb-ethernet
3	one-gb-fibre-channel
4	two-gb-fibre-channel
5	four-gb-fibre-channel
6	eight-gb-fibre-channel
7	not-available

.1.3.6.1.4.1.12740.18.1.19.1.7

The lowest network speed among the NAS chassis internal network interfaces.

eqlNASChassisSanNetworkSpeed

Type Values:

0	one-gb-ethernet
1	ten-gb-ethernet
2	twenty-gb-ethernet
3	one-gb-fibre-channel
4	two-gb-fibre-channel
5	four-gb-fibre-channel
6	eight-gb-fibre-channel
7	not-available

.1.3.6.1.4.1.12740.18.1.19.1.8

The lowest network speed among the NAS chassis san network interfaces.

eqlNASChassisClientNetworkStatus

Type Values:

0	one-gb-ethernet
1	ten-gb-ethernet
2	twenty-gb-ethernet
3	one-gb-fibre-channel
4	two-gb-fibre-channel
5	four-gb-fibre-channel
6	eight-gb-fibre-channel
7	not-available

.1.3.6.1.4.1.12740.18.1.19.1.9

The NAS chassis client network status.

eqlNASChassisBackplaneNetworkStatus

Type Values:

0	optimal
1	not-optimal
2	critical
3	not-available

.1.3.6.1.4.1.12740.18.1.19.1.10

The NAS chassis backplane network status.

eqlNASChassisInternalNetworkStatus

Type Values:

0	optimal
1	not-optimal
2	critical
3	not-available

.1.3.6.1.4.1.12740.18.1.19.1.11

The NAS chassis internal network status.

eqlNASChassisSanNetworkStatus

Type Values:

0	optimal
1	not-optimal
2	critical
3	not-available

.1.3.6.1.4.1.12740.18.1.19.1.12

The NAS chassis san network status.

eqlNASChassisOverallFanStatus

Type Values:

0	optimal
1	not-optimal
2	critical
3	not-available

.1.3.6.1.4.1.12740.18.1.19.1.13

The NAS chassis overall fan status.

eqlNASChassisOverallPowerSupplyStatus

Type Values:

0	optimal
1	not-optimal
2	critical
3	not-available

.1.3.6.1.4.1.12740.18.1.19.1.14

The NAS chassis overall power supply status.

EqlNASChassisACPowerStatus

Type Values:

0	redundant
1	partial
2	not-available

.1.3.6.1.4.1.12740.18.1.19.1.15

eqlNASChassisFanStatusTable

table

.1.3.6.1.4.1.12740.18.1.19.2 · 1 row entry · 4 columns

Open in standard view

Uses the equallogic variant from /opt/observium/mibs/equallogic.

Command help

Walk eqlNASChassisFanStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLNAS-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLNAS-MIB::eqlNASChassisFanStatusTable'

EqualLogic-Dynamic NAS chassis fan status table.
TimeoutAll:60

eqlNASChassisFanStatusEntry row .1.3.6.1.4.1.12740.18.1.19.2.1

An entry (row) containing the NAS chassis fan status.

Indexes

EQLAPPLIANCE-MIBeqlApplianceIndex eqlNASChassisIndex eqlNASChassisFanName

Column Syntax OID

eqlNASChassisFanName

The NAS chassis fan name.

OctetString

Constraints:
range: 1-64

.1.3.6.1.4.1.12740.18.1.19.2.1.1

eqlNASChassisFanStatus

The NAS chassis fan status.

Type Values:

0	optimal
1	not-optimal
2	critical
3	not-available

.1.3.6.1.4.1.12740.18.1.19.2.1.2

eqlNASChassisFanRpm

The NAS Chassis fan RPM.

EQLAPPLIANCE-MIBeqlApplianceIndex eqlNASChassisIndex eqlNASChassisPowerSupplyName

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.18.1.19.2.1.3

eqlNASChassisFanRpmRange

The NAS Chassis fan RPM range.

OctetString

Constraints:
range: 1-50

.1.3.6.1.4.1.12740.18.1.19.2.1.4

eqlNASChassisPowerSupplyStatusTable

table

.1.3.6.1.4.1.12740.18.1.19.3 · 1 row entry · 2 columns

Open in standard view

Uses the equallogic variant from /opt/observium/mibs/equallogic.

Command help

Walk eqlNASChassisPowerSupplyStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLNAS-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLNAS-MIB::eqlNASChassisPowerSupplyStatusTable'

EqualLogic-Dynamic NAS chassis power supply status table.
TimeoutAll:60

eqlNASChassisPowerSupplyStatusEntry row .1.3.6.1.4.1.12740.18.1.19.3.1

An entry (row) containing the NAS chassis power supply status.

Indexes

Column Syntax OID

eqlNASChassisPowerSupplyName

The NAS chassis power supply name.

OctetString

Constraints:
range: 1-64

.1.3.6.1.4.1.12740.18.1.19.3.1.1

eqlNASChassisPowerSupplyStatus

The NAS chassis power supply status.

EQLAPPLIANCE-MIBeqlApplianceIndex eqlNASChassisControllerIndex

Type Values:

0	optimal
1	not-optimal
2	critical
3	not-available

.1.3.6.1.4.1.12740.18.1.19.3.1.2

eqlNASChassisControllerStatusTable

table

.1.3.6.1.4.1.12740.18.1.20 · 1 row entry · 28 columns

Open in standard view

Uses the equallogic variant from /opt/observium/mibs/equallogic.

Command help

Walk eqlNASChassisControllerStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLNAS-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLNAS-MIB::eqlNASChassisControllerStatusTable'

EqualLogic-Dynamic NAS chassis controller status table.
TimeoutAll:60

eqlNASChassisControllerStatusEntry row .1.3.6.1.4.1.12740.18.1.20.1

An entry (row) containing the NAS chassis controller status.

Indexes

Column Syntax OID

eqlNASChassisControllerIndex

The NAS Chassis controller index.

eqlNASChassisControllerStatus

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.18.1.20.1.1

The NAS Chassis controller status.

eqlNASChassisControllerState

Type Values:

0	optimal
1	not-optimal
2	critical
3	not-available

.1.3.6.1.4.1.12740.18.1.20.1.2

The NAS Chassis controller state.

EqlNASChassisControllerState

Type Values:

0	standby
1	unformatted
2	formatted
3	detached
4	down
5	not-available

.1.3.6.1.4.1.12740.18.1.20.1.3

eqlNASChassisControllerLocation

The NAS Chassis controller location.

EqlNASChassisControllerLocation

Type Values:

0	one
1	two
2	irrelevant
3	not-available

.1.3.6.1.4.1.12740.18.1.20.1.4

eqlNASChassisControllerAmbientTemperatureStatus

The NAS Chassis controller ambient temperaure status.

eqlNASChassisControllerAmbientTemperatureValue

Type Values:

0	optimal
1	not-optimal
2	critical
3	not-available

.1.3.6.1.4.1.12740.18.1.20.1.5

The NAS Chassis controller ambient temperaure value.

eqlNASChassisControllerSystemControllerId

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.12740.18.1.20.1.6

The NAS Chassis controller system controller id.

OctetString

Constraints:
range: 1-64

.1.3.6.1.4.1.12740.18.1.20.1.7

eqlNASChassisControllerBPSStatus

The NAS Chassis controller BPS status.

eqlNASChassisControllerBPSIsAccessible

Type Values:

0	optimal
1	not-optimal
2	critical
3	not-available

.1.3.6.1.4.1.12740.18.1.20.1.8

The NAS Chassis controller BPS accessibility.

eqlNASChassisControllerBPSModel

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.12740.18.1.20.1.9

The NAS Chassis controller BPS model.

OctetString

Constraints:
range: 1-64

.1.3.6.1.4.1.12740.18.1.20.1.10

eqlNASChassisControllerBPSCharge

The NAS Chassis controller BPS charge percentage.

%SNMPv2-SMIUnsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.18.1.20.1.11

eqlNASChassisControllerCPUOverallStatus

The NAS Chassis controller overall CPU status.

eqlNASChassisControllerCPUCurrentCoresCount

Type Values:

0	optimal
1	not-optimal
2	critical
3	not-available

.1.3.6.1.4.1.12740.18.1.20.1.12

The NAS Chassis controller current CPU cores count.

eqlNASChassisControllerOverallFanStatus

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.18.1.20.1.13

The NAS Chassis controller overall fan status.

eqlNASChassisControllerOverallLocalDiskStatus

Type Values:

0	optimal
1	not-optimal
2	critical
3	not-available

.1.3.6.1.4.1.12740.18.1.20.1.14

The NAS Chassis controller overall local disk status.

eqlNASChassisControllerOverallRaidControllerStatus

Type Values:

0	optimal
1	not-optimal
2	critical
3	not-available

.1.3.6.1.4.1.12740.18.1.20.1.15

The NAS Chassis controller overall raid controller status.

eqlNASChassisControllerOverallVirtualDiskStatus

Type Values:

0	optimal
1	not-optimal
2	critical
3	not-available

.1.3.6.1.4.1.12740.18.1.20.1.16

The NAS Chassis controller overall virtual disk status.

eqlNASChassisControllerMemoryStatus

Type Values:

0	optimal
1	not-optimal
2	critical
3	not-available

.1.3.6.1.4.1.12740.18.1.20.1.17

The NAS Chassis controller memory status.

eqlNASChassisControllerMemorySize

Type Values:

0	optimal
1	not-optimal
2	critical
3	not-available

.1.3.6.1.4.1.12740.18.1.20.1.18

The NAS Chassis controller total memory size.

eqlNASChassisControllerBackplaneNetworkStatus

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.18.1.20.1.19

The NAS Chassis controller backplane network status.

eqlNASChassisControllerBackplaneNetworkSpeed

Type Values:

0	optimal
1	not-optimal
2	critical
3	not-available

.1.3.6.1.4.1.12740.18.1.20.1.20

The lowest network speed among the NAS chassis backplane network interfaces.

eqlNASChassisControllerClientNetworkStatus

Type Values:

0	one-gb-ethernet
1	ten-gb-ethernet
2	twenty-gb-ethernet
3	one-gb-fibre-channel
4	two-gb-fibre-channel
5	four-gb-fibre-channel
6	eight-gb-fibre-channel
7	not-available

.1.3.6.1.4.1.12740.18.1.20.1.21

The NAS Chassis controller client network status.

eqlNASChassisControllerClientNetworkSpeed

Type Values:

0	optimal
1	not-optimal
2	critical
3	not-available

.1.3.6.1.4.1.12740.18.1.20.1.22

The lowest network speed among the NAS chassis client network interfaces.

eqlNASChassisControllerInternalNetworkStatus

Type Values:

0	one-gb-ethernet
1	ten-gb-ethernet
2	twenty-gb-ethernet
3	one-gb-fibre-channel
4	two-gb-fibre-channel
5	four-gb-fibre-channel
6	eight-gb-fibre-channel
7	not-available

.1.3.6.1.4.1.12740.18.1.20.1.23

The NAS Chassis controller internal network status.

eqlNASChassisControllerInternalNetworkSpeed

Type Values:

0	optimal
1	not-optimal
2	critical
3	not-available

.1.3.6.1.4.1.12740.18.1.20.1.24

The lowest network speed among the NAS chassis internal network interfaces.

eqlNASChassisControllerSanNetworkStatus

Type Values:

0	one-gb-ethernet
1	ten-gb-ethernet
2	twenty-gb-ethernet
3	one-gb-fibre-channel
4	two-gb-fibre-channel
5	four-gb-fibre-channel
6	eight-gb-fibre-channel
7	not-available

.1.3.6.1.4.1.12740.18.1.20.1.25

The NAS Chassis controller san network status.

eqlNASChassisControllerSanNetworkSpeed

Type Values:

0	optimal
1	not-optimal
2	critical
3	not-available

.1.3.6.1.4.1.12740.18.1.20.1.26

The lowest network speed among the NAS chassis san network interfaces.

eqlNASChassisControllerOverallPowerSupplyStatus

Type Values:

0	one-gb-ethernet
1	ten-gb-ethernet
2	twenty-gb-ethernet
3	one-gb-fibre-channel
4	two-gb-fibre-channel
5	four-gb-fibre-channel
6	eight-gb-fibre-channel
7	not-available

.1.3.6.1.4.1.12740.18.1.20.1.27

The NAS Chassis controller overall power supply status.

EqlNASChassisACPowerStatus

Type Values:

0	redundant
1	partial
2	not-available

.1.3.6.1.4.1.12740.18.1.20.1.28

eqlNASChassisControllerFanStatusTable

table

.1.3.6.1.4.1.12740.18.1.20.2 · 1 row entry · 4 columns

Open in standard view

Uses the equallogic variant from /opt/observium/mibs/equallogic.

Command help

Walk eqlNASChassisControllerFanStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLNAS-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLNAS-MIB::eqlNASChassisControllerFanStatusTable'

EqualLogic-Dynamic NAS chassis controller fan status table.
TimeoutAll:60

eqlNASChassisControllerFanStatusEntry row .1.3.6.1.4.1.12740.18.1.20.2.1

An entry (row) containing the NAS chassis controller fan status.

Indexes

EQLAPPLIANCE-MIBeqlApplianceIndex eqlNASChassisControllerIndex eqlNASChassisControllerFanName

Column Syntax OID

eqlNASChassisControllerFanName

The NAS chassis controller fan name.

OctetString

Constraints:
range: 1-64

.1.3.6.1.4.1.12740.18.1.20.2.1.1

eqlNASChassisControllerFanStatus

The NAS chassis controller fan status.

eqlNASChassisControllerFanRpm

Type Values:

0	optimal
1	not-optimal
2	critical
3	not-available

.1.3.6.1.4.1.12740.18.1.20.2.1.2

The NAS chassis controller fan RPM.

eqlNASChassisControllerFanRpmRange

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.18.1.20.2.1.3

The NAS chassis controller fan RPM range.

OctetString

Constraints:
range: 1-50

.1.3.6.1.4.1.12740.18.1.20.2.1.4

eqlNASChassisControllerPowerSupplyStatusTable

table

.1.3.6.1.4.1.12740.18.1.20.3 · 1 row entry · 2 columns

Open in standard view

Uses the equallogic variant from /opt/observium/mibs/equallogic.

Command help

Walk eqlNASChassisControllerPowerSupplyStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLNAS-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLNAS-MIB::eqlNASChassisControllerPowerSupplyStatusTable'

EqualLogic-Dynamic NAS chassis controller power supply status table.
TimeoutAll:60

eqlNASChassisControllerPowerSupplyStatusEntry row .1.3.6.1.4.1.12740.18.1.20.3.1

An entry (row) containing the NAS chassis controller power supply status.

Indexes

EQLAPPLIANCE-MIBeqlApplianceIndex eqlNASChassisControllerIndex eqlNASChassisControllerPowerSupplyName

Column Syntax OID

eqlNASChassisControllerPowerSupplyName

The NAS chassis controller power supply name.

OctetString

Constraints:
range: 1-64

.1.3.6.1.4.1.12740.18.1.20.3.1.1

eqlNASChassisControllerPowerSupplyStatus

The NAS chassis controller power supply status.

EQLAPPLIANCE-MIBeqlApplianceIndex eqlNASChassisControllerIndex eqlNASChassisControllerDiskName

Type Values:

0	optimal
1	not-optimal
2	critical
3	not-available

.1.3.6.1.4.1.12740.18.1.20.3.1.2

eqlNASChassisControllerDiskStatusTable

table

.1.3.6.1.4.1.12740.18.1.20.4 · 1 row entry · 2 columns

Open in standard view

Uses the equallogic variant from /opt/observium/mibs/equallogic.

Command help

Walk eqlNASChassisControllerDiskStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLNAS-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLNAS-MIB::eqlNASChassisControllerDiskStatusTable'

EqualLogic-Dynamic NAS chassis controller physical disk status table.
TimeoutAll:60

eqlNASChassisControllerDiskStatusEntry row .1.3.6.1.4.1.12740.18.1.20.4.1

An entry (row) containing the NAS chassis controller physical disk status.

Indexes

Column Syntax OID

eqlNASChassisControllerDiskName

The NAS chassis controller physical disk name.

OctetString

Constraints:
range: 1-64

.1.3.6.1.4.1.12740.18.1.20.4.1.1

eqlNASChassisControllerDiskStatus

The NAS chassis controller physical disk status.

EQLAPPLIANCE-MIBeqlApplianceIndex eqlNASChassisControllerIndex EQLAPPLIANCE-MIBeqlApplianceNetworkType eqlNASChassisControllerNicName

Type Values:

0	optimal
1	not-optimal
2	critical
3	not-available

.1.3.6.1.4.1.12740.18.1.20.4.1.2

eqlNASChassisControllerNicStatusTable

table

.1.3.6.1.4.1.12740.18.1.20.5 · 1 row entry · 7 columns

Open in standard view

Uses the equallogic variant from /opt/observium/mibs/equallogic.

Command help

Walk eqlNASChassisControllerNicStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLNAS-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLNAS-MIB::eqlNASChassisControllerNicStatusTable'

EqualLogic-Dynamic NAS chassis controller nic status table.
TimeoutAll:60

eqlNASChassisControllerNicStatusEntry row .1.3.6.1.4.1.12740.18.1.20.5.1

An entry (row) containing the NAS chassis controller nic status.

Indexes

Column Syntax OID

eqlNASChassisControllerNicName

The NAS chassis controller nic name.

OctetString

Constraints:
range: 1-64

.1.3.6.1.4.1.12740.18.1.20.5.1.1

eqlNASChassisControllerNicState

The NAS chassis controller nic state.

Enumeration

Enumerated Values:

0	on
1	off
2	not-available

.1.3.6.1.4.1.12740.18.1.20.5.1.2

eqlNASChassisControllerNicSpeed

The NAS chassis controller nic speed.

eqlNASChassisControllerNicSlot

Type Values:

0	one-gb-ethernet
1	ten-gb-ethernet
2	twenty-gb-ethernet
3	one-gb-fibre-channel
4	two-gb-fibre-channel
5	four-gb-fibre-channel
6	eight-gb-fibre-channel
7	not-available

.1.3.6.1.4.1.12740.18.1.20.5.1.3

The NAS chassis controller nic slot.

OctetString

Constraints:
range: 1-30

.1.3.6.1.4.1.12740.18.1.20.5.1.4

eqlNASChassisControllerNicPort

The NAS chassis controller nic port.

eqlNASChassisControllerNicDuplex

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.18.1.20.5.1.5

The NAS chassis controller nic duplex mode.

Enumeration

Enumerated Values:

0	full
1	half
2	unknown

.1.3.6.1.4.1.12740.18.1.20.5.1.6

eqlNASChassisControllerNicFlowControl

The NAS chassis controller nic flow control state.

Enumeration

Enumerated Values:

0	on
1	off
2	unknown

.1.3.6.1.4.1.12740.18.1.20.5.1.7

eqlNASDiagsTable

table

.1.3.6.1.4.1.12740.18.1.21 · 1 row entry · 3 columns

Open in standard view

Uses the equallogic variant from /opt/observium/mibs/equallogic.

Command help

Walk eqlNASDiagsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLNAS-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLNAS-MIB::eqlNASDiagsTable'

EqualLogic-Dynamic table controlling the NAS diags.

eqlNASDiagsEntry row .1.3.6.1.4.1.12740.18.1.21.1

An entry (row) containing the diags information.

Indexes

EQLAPPLIANCE-MIBeqlApplianceIndex EQLAPPLIANCE-MIBeqlApplianceNetworkID eqlNASClientStaticRouteNetworkAddrType eqlNASClientStaticRouteNetworkAddr eqlNASClientStaticRouteNetworkMaskType eqlNASClientStaticRouteNetworkMask

Column Syntax OID

eqlNASDiagsStart

This field selects the diagnostic to start.

Enumerationr/w

Enumerated Values:

1	general
2	file
3	network
4	performance
5	clientconnectivity
6	fileaccessibility
7	protocolslog
8	logs

.1.3.6.1.4.1.12740.18.1.21.1.1

eqlNASDiagsCaseNumber

This field holds the OPTIONAL Dell Support case number for the
NAS diagnostics.

OctetStringr/w

Constraints:
range: 1-10

.1.3.6.1.4.1.12740.18.1.21.1.2

eqlNASDiagsStatus

This field holds the status of the NAS diagnostics
operation.

Enumeration

Enumerated Values:

1	idle
2	running

.1.3.6.1.4.1.12740.18.1.21.1.3

eqlNASClientStaticRouteTable

table

.1.3.6.1.4.1.12740.18.1.22 · 1 row entry · 7 columns

Open in standard view

Uses the equallogic variant from /opt/observium/mibs/equallogic.

Command help

Walk eqlNASClientStaticRouteTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLNAS-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLNAS-MIB::eqlNASClientStaticRouteTable'

EqualLogic-Dynamic table controlling the NAS client static routes. The static
route entries are used to route the CLIENT traffic from the cluster members to
gateways on the CLIENT network.

eqlNASClientStaticRouteEntry row .1.3.6.1.4.1.12740.18.1.22.1

An entry (row) containing the NAS static route information for a subnet of the client network.

Indexes

Column Syntax OID

eqlNASClientStaticRouteRowStatus

SNMP Row Status

eqlNASClientStaticRouteNetworkAddrType

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.12740.18.1.22.1.1

This field specifies the type (v4/v6) for the network address of the
static route.

eqlNASClientStaticRouteNetworkAddr

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.12740.18.1.22.1.2

This field contains the network IP address for the static route
(e.g. 200.200.200.0).

eqlNASClientStaticRouteNetworkMaskType

Type Constraints:
range: 0..255

.1.3.6.1.4.1.12740.18.1.22.1.3

This field specifies the type (v4/v6) for the network mask of the
static route.The IP address of the network mask is assumed to be the
same as that of the network address.

eqlNASClientStaticRouteNetworkMask

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.12740.18.1.22.1.4

This field contains the network mask for the static route
(e.g. 255.255.255.0).

eqlNASClientStaticRouteGatewayAddrType

Type Constraints:
range: 0..255

.1.3.6.1.4.1.12740.18.1.22.1.5

This field specifies the type (v4/v6) of the gateway IP address.

eqlNASClientStaticRouteGatewayAddr

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.12740.18.1.22.1.6

This field contains the gateway IP address for the static route
(e.g. 10.127.20.30).

Type Constraints:
range: 0..255

.1.3.6.1.4.1.12740.18.1.22.1.7

eqlNASClusterUpdateTable

table

.1.3.6.1.4.1.12740.18.1.23 · 1 row entry · 6 columns

Open in standard view

Uses the equallogic variant from /opt/observium/mibs/equallogic.

Command help

Walk eqlNASClusterUpdateTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLNAS-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLNAS-MIB::eqlNASClusterUpdateTable'

EqualLogic-Dynamic table to update NAS Cluster Firmware.
TimeoutAll:60

eqlNASClusterUpdateEntry row .1.3.6.1.4.1.12740.18.1.23.1

An entry (row) containing the NAS Cluster firmware update information.

Indexes

eqlNASClusterUpdateRowStatus

Column Syntax OID

Rowstatus variable used to manage this conceptual row.

eqlNASClusterUpdateFilename

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.12740.18.1.23.1.1

This field holds the NAS Cluster firmware update script filename.

OctetStringr/w

Constraints:
range: 1-261

.1.3.6.1.4.1.12740.18.1.23.1.2

eqlNASClusterUpdateEQLGroupMPV

The Management Protocol Version (MPV) of the EQL Group.

eqlNASClusterUpdateClusterMPV

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.18.1.23.1.3

The Management Protocol Version (MPV) of the NAS Appliance Cluster.

eqlNASClusterUpdateEQLGroupCurrentCompLevel

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.18.1.23.1.4

This field represents the current compatibility level of the EQL group.

eqlNASClusterUpdateRequestId

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.18.1.23.1.5

This field represents the the NAS cluster update operation request identifier.

SNMPv2-SMICounter64r/w

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.12740.18.1.23.1.6

eqlNASClusterInfoTable

table

.1.3.6.1.4.1.12740.18.1.24 · 1 row entry · 7 columns

Open in standard view

Uses the equallogic variant from /opt/observium/mibs/equallogic.

Command help

Walk eqlNASClusterInfoTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLNAS-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLNAS-MIB::eqlNASClusterInfoTable'

EqualLogic-Dynamic(semi) table used to get local or remote NAS cluster's id and certificate
TimeoutAll:60

eqlNASClusterInfoEntry row .1.3.6.1.4.1.12740.18.1.24.1

An entry contains the cluster Id and certificate

Indexes

EQLAPPLIANCE-MIBeqlApplianceIndex eqlNASClusterInfoSiteType EQLVOLUME-MIBeqliscsiVolumeReplSiteIndex eqlNASClusterInfoSegmentId

Column Syntax OID

eqlNASClusterInfoRowStatus

This field is used indicate the status of this entry.

eqlNASClusterInfoSiteType

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.12740.18.1.24.1.1

This field specifies whether the Certificate request is for local or
from remote replication partner site.

Enumeration

Enumerated Values:

1	local
2	remote

.1.3.6.1.4.1.12740.18.1.24.1.2

eqlNASClusterInfoSegmentId

Index into list Certificate data

eqlNASClusterInfoSegmentSize

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.18.1.24.1.3

Size of the Certificate data segment

eqlNASClusterInfoMoreSegment

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.18.1.24.1.4

True returned if there is are more segment to be feteched for
the certificate

eqlNASClusterInfoCertificate

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.12740.18.1.24.1.5

String containing RSA certificate for local cluster.

CertificateType

Type Constraints:
range: 0..1750

.1.3.6.1.4.1.12740.18.1.24.1.6

eqlNASClusterInfoClusterId

String containing local cluster Id. It should be unique within the network.
It is generated by IDC code.

ClusterIdType

Type Constraints:
range: 0..50

.1.3.6.1.4.1.12740.18.1.24.1.7

eqlNASReplPartnerClusterIdMapTable

table

.1.3.6.1.4.1.12740.18.1.25 · 1 row entry · 3 columns

Open in standard view

Uses the equallogic variant from /opt/observium/mibs/equallogic.

Command help

Walk eqlNASReplPartnerClusterIdMapTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLNAS-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLNAS-MIB::eqlNASReplPartnerClusterIdMapTable'

EqualLogic-Dynamic
This table is used to get the NAS Cluster Id for the given remote NAS SAN VIP.

eqlNASReplPartnerClusterIdMapEntry row .1.3.6.1.4.1.12740.18.1.25.1

Indexes

EQLAPPLIANCE-MIBeqlApplianceIndex eqlNASReplPartnerClusterIdMapSanVIPType eqlNASReplPartnerClusterIdMapSanVIP

Column Syntax OID

eqlNASReplPartnerClusterIdMapSanVIPType

The SAN VIP type of the cluster.

INET-ADDRESS-MIBInetAddressType

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.12740.18.1.25.1.1

eqlNASReplPartnerClusterIdMapSanVIP

The SAN VIP address of the cluster.

INET-ADDRESS-MIBInetAddress

Type Constraints:
range: 0..255

.1.3.6.1.4.1.12740.18.1.25.1.2

eqlNASReplPartnerClusterIdMapClusterId

Cluster Id, a unique identifier of the cluster assingned at the
time of cluster creation.

ClusterIdType

Type Constraints:
range: 0..50

.1.3.6.1.4.1.12740.18.1.25.1.3

eqlNASReplPartnerConfigTable

table

.1.3.6.1.4.1.12740.18.1.26 · 1 row entry · 4 columns

Open in standard view

Uses the equallogic variant from /opt/observium/mibs/equallogic.

Command help

Walk eqlNASReplPartnerConfigTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLNAS-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLNAS-MIB::eqlNASReplPartnerConfigTable'

EqualLogic-Dynamic 
This table is used to configure NAS replication partnership 
(Trust) with a remote NAS cluster.
TimeoutAll:60

eqlNASReplPartnerConfigEntry row .1.3.6.1.4.1.12740.18.1.26.1

An entry contains some of the information needed to create
replication partnership with a remote NAS cluster.
The combination of index and entry provides the information
needed to create partnership/trust with the re…

Indexes

EQLAPPLIANCE-MIBeqlApplianceIndex eqlNASClusterInfoClusterId eqlNASClusterInfoSegmentId

Column Syntax OID

eqlNASReplPartnerConfigRowStatus

This field is used indicate the status of this entry.

eqlNASReplPartnerConfigCertificate

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.12740.18.1.26.1.1

String containing all or a portion of the certificate
used in authenticating the remote cluster.

CertificateType

Type Constraints:
range: 0..1750

.1.3.6.1.4.1.12740.18.1.26.1.2

eqlNASReplPartnerConfigInetAddrType

The address type for the RemoteCluster SAN VIP

eqlNASReplPartnerConfigInetAddr

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.12740.18.1.26.1.3

The RemoteCluster SAN VIP

EQLAPPLIANCE-MIBeqlApplianceIndex eqlNASContainerIndex eqlNASReplSiteRemoteClusterId eqlNASReplRemoteFSId

Type Constraints:
range: 0..255

.1.3.6.1.4.1.12740.18.1.26.1.4

eqlNASReplTable

table

.1.3.6.1.4.1.12740.18.1.27 · 1 row entry · 16 columns

Open in standard view

Uses the equallogic variant from /opt/observium/mibs/equallogic.

Command help

Walk eqlNASReplTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLNAS-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLNAS-MIB::eqlNASReplTable'

EqualLogic-Dynamic
TimeoutAll:60
This table is used to configure and monitor NAS replication relationships 
in FluidFS versions 3.0 and later. Prior versions used eqlNASReplicationTable 
for that purpose.

eqlNASReplEntry row .1.3.6.1.4.1.12740.18.1.27.1

Indexes

Column Syntax OID

eqlNASReplRowStatus

The status of the row

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.12740.18.1.27.1.1

eqlNASReplRemoteFSId

Unique Identifier for the remote container. This is the FSid.

eqlNASReplVolumeReplSiteIndex

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.18.1.27.1.2

The value of eqliscsiVolumeReplSiteIndex to index into
eqliscsiVolumeReplSiteTable.

EQLVOLUME-MIBSiteIndexr/w

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.12740.18.1.27.1.3

eqlNASReplRemoteClusterName

This field specifies the remote cluster name, which is the
eqlApplianceName of the remote cluster.

OctetString

Constraints:
range: 1-64

.1.3.6.1.4.1.12740.18.1.27.1.4

eqlNASReplRemoteFSName

Name used to identify the remote NAS Container. Contains
only letters, digits and underscores. Must begin with either
letter or an underscore.

OctetStringr/w

Constraints:
range: 1-230

.1.3.6.1.4.1.12740.18.1.27.1.5

eqlNASReplAchievedRecoveryTime

This field specifies the date/time of the last recovery snapshot
that has been copied. Time is represented as the time in seconds
since 00:00:00 UTC, 1970-01-01.

eqlNASReplNextRecoveryTime

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.18.1.27.1.6

This field specifies the date/time of the next recovery snapshot
that will be copied. Time is represented as the time in seconds
since 00:00:00 UTC, 1970-01-01.

eqlNASReplTargetRecoveryTime

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.18.1.27.1.7

This field specifies the date/time of the target/goal for
next recovery snapshot to be copied. This is N/A to EQL.
Time is represented as the time in seconds since 00:00:00 UTC,
1970-01-01.

eqlNASReplTransferredPercent

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.18.1.27.1.8

Provides a percent transferred for the current replication process.

%SNMPv2-SMIUnsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.18.1.27.1.9

eqlNASReplTransferredMB

Provides data transferred (in MB) for the current replication process.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.18.1.27.1.10

eqlNASReplStatus

The status of this replication relationship.

Type Values:

0	unknown
1	idle
2	active
3	waitingretry
4	failed
5	paused
6	cancelled
7	resuming
8	deleting
9	pausing
10	finished
11	cancelling
12	promoted
13	promoting
14	idlewaittoschedule
15	demoting

.1.3.6.1.4.1.12740.18.1.27.1.11

eqlNASReplAction

Use this column to perform actions on this replication relationship.

Enumerationr/w

Enumerated Values:

0	none
1	replicate
2	pause
3	resume
4	cancel
5	demote
6	promote
7	force-promote
8	delete
9	force-delete
100	outbound-delete
101	outbound-force-delete
102	inbound-delete
103	inbound-promote
104	inbound-promote-restore-cfg
105	inbound-promote-keep-demote
106	inbound-promote-keep-demote-restore-cfg
107	inbound-delete-failback
108	inbound-delete-failback-restore-cfg
109	restore-cfg
110	inbound-pause
111	inbound-resume
112	internal-promote

.1.3.6.1.4.1.12740.18.1.27.1.12

eqlNASReplSecsToComplete

Seconds left in completion of the current replication process.

eqlNASReplCurrentXferRateKbps

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.18.1.27.1.13

eqlNASReplError

Error encountered during replication.

EqlNASReplicationError

Type Values:

0	none
1	disconnected
2	internal
3	fs-down
4	config
5	not-sec
6	sec-busy
7	sec-fs-down
8	versions-dont-match
9	no-space
10	sec-cur-not-empty
11	no-base-found
12	pri-vol-reclaim
13	sec-vol-reclaim
14	fs-pri-not-optimal
15	fs-sec-not-optimal
16	fs-pri-not-available-threads
17	fs-sec-not-available-threads
18	jumbo-frame
19	dest-repl-disabled
20	snap-clone-base

.1.3.6.1.4.1.12740.18.1.27.1.14

eqlNASReplRole

The role(src/dest) of this container in the relication relationship.

EqlNASReplicationRole

Type Values:

0	unknown
1	source
2	destination

.1.3.6.1.4.1.12740.18.1.27.1.15

The current rate of data transfer(kbps) for the replication under
progress.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.18.1.27.1.16

eqlNASConfigStateTable

table

.1.3.6.1.4.1.12740.18.1.28 · 1 row entry · 2 columns

Open in standard view

Uses the equallogic variant from /opt/observium/mibs/equallogic.

Command help

Walk eqlNASConfigStateTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLNAS-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLNAS-MIB::eqlNASConfigStateTable'

EqualLogic-Dynamic table controlling the NAS cluster configuration state.

eqlNASConfigStateEntry row .1.3.6.1.4.1.12740.18.1.28.1

An entry (row) containing the NAS Cluster configuration state information.

Indexes

eqlNASConfigStateConfigFinished

Column Syntax OID

True if NAS Cluster configuration is completed.

eqlNASConfigStateHardwareReplaceInProgress

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.12740.18.1.28.1.1

True if NAS Cluster hardware replacement is in progress.

EQLAPPLIANCE-MIBeqlApplianceIndex eqlNASClientNodeIndex eqlNASClientIPAddressType eqlNASClientIPAddress eqlNASClientUserName eqlNASClientProtocol

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.12740.18.1.28.1.2

eqlNASClientTable

table

.1.3.6.1.4.1.12740.18.1.29 · 1 row entry · 9 columns

Open in standard view

Uses the equallogic variant from /opt/observium/mibs/equallogic.

Command help

Walk eqlNASClientTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLNAS-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLNAS-MIB::eqlNASClientTable'

EqualLogic-Dynamic 
This table contains NAS Client information.
TimeoutAll:60

eqlNASClientEntry row .1.3.6.1.4.1.12740.18.1.29.1

An entry (row) containing NAS client information.

Indexes

Column Syntax OID

eqlNASClientNodeIndex

NAS client node index.

eqlNASClientIPAddressType

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.18.1.29.1.1

This field specifies the type of address (v4/v6) of this IP address entry.

INET-ADDRESS-MIBInetAddressType

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.12740.18.1.29.1.2

eqlNASClientIPAddress

NAS client IPv4 address.

INET-ADDRESS-MIBInetAddress

Type Constraints:
range: 0..255

.1.3.6.1.4.1.12740.18.1.29.1.3

eqlNASClientUserName

NAS client user name.

OctetString

Constraints:
range: 1-85

.1.3.6.1.4.1.12740.18.1.29.1.4

eqlNASClientProtocol

NAS client protocol.

Enumeration

Enumerated Values:

cifs

.1.3.6.1.4.1.12740.18.1.29.1.5

eqlNASClientConnectedTime

The time in seconds that has elapsed since this client connection was first
established with the NAS controller.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.18.1.29.1.6

eqlNASClientIdleTime

The time in seconds that has elapsed since this client connection is idle.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.18.1.29.1.7

eqlNASClientNumOpenFiles

The number of open files from this client connection.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.18.1.29.1.8

eqlNASClientIsGuest

True if the client initiating this connection is a guest.

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.12740.18.1.29.1.9

eqlNASStatsClusterTrafficRateTable

table

.1.3.6.1.4.1.12740.18.1.30 · 1 row entry · 22 columns

Open in standard view

Uses the equallogic variant from /opt/observium/mibs/equallogic.

Command help

Walk eqlNASStatsClusterTrafficRateTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLNAS-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLNAS-MIB::eqlNASStatsClusterTrafficRateTable'

EqualLogic-Dynamic
This table contains NAS traffic rate statistics for the NAS cluster.
TimeoutAll:60

eqlNASStatsClusterTrafficRateEntry row .1.3.6.1.4.1.12740.18.1.30.1

An entry (row) containing peristent NAS cluster traffic rate statistics.

Indexes

EQLAPPLIANCE-MIBeqlApplianceIndex eqlNASStatsControllerTrafficRateIndex

Column	Syntax	OID
eqlNASStatsClusterTrafficRateTimestamp This field specifies the date/time when the statistics were collected. Time is represented as the time in seconds since 00:00:00 UTC, 1970-01-01.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.12740.18.1.30.1.1`
eqlNASStatsClusterTrafficRateNfsReadMBsPerSec The number of MBs read per second via NFS per cluster.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.12740.18.1.30.1.2`
eqlNASStatsClusterTrafficRateNfsWriteMBsPerSec The number of MBs written per second via NFS per cluster.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.12740.18.1.30.1.3`
eqlNASStatsClusterTrafficRateNdmpReadMBsPerSec The number of MBs read per second via NDMP per cluster.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.12740.18.1.30.1.4`
eqlNASStatsClusterTrafficRateNdmpWriteMBsPerSec The number of MBs written per second via NDMP per cluster.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.12740.18.1.30.1.5`
eqlNASStatsClusterTrafficRateCifsReadMBsPerSec The number of MBs read per second via CIFS per cluster.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.12740.18.1.30.1.6`
eqlNASStatsClusterTrafficRateCifsWriteMBsPerSec The number of MBs written per second via CIFS per second per cluster.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.12740.18.1.30.1.7`
eqlNASStatsClusterTrafficRateReplicationReadMBsPerSec The number of replication MBs read per second per cluster.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.12740.18.1.30.1.8`
eqlNASStatsClusterTrafficRateReplicationWriteMBsPerSec The number of replication MBs written per second per cluster.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.12740.18.1.30.1.9`
eqlNASStatsClusterTrafficRateStorageSubSystemReadMBsPerSec The number of storage subsystem MBs read per second per cluster.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.12740.18.1.30.1.10`
eqlNASStatsClusterTrafficRateStorageSubSystemWriteMBsPerSec The number of storage subsystem MBs written per second per cluster.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.12740.18.1.30.1.11`
eqlNASStatsClusterTrafficRateNetworkOverheadReadMBsPerSec The number of network overhead MBs read per second per cluster.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.12740.18.1.30.1.12`
eqlNASStatsClusterTrafficRateNetworkOverheadWriteMBsPerSec The number of network overhead MBs written per second per cluster.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.12740.18.1.30.1.13`
eqlNASStatsClusterTrafficRateNetworkPacketDropsPerSec The number of network packet drops per second per cluster.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.12740.18.1.30.1.14`
eqlNASStatsClusterTrafficRateNfsIOPSRead The number of NFS IO read operations per second per cluster.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.12740.18.1.30.1.15`
eqlNASStatsClusterTrafficRateNfsIOPSWrite The number of NFS IO write operations per second per cluster.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.12740.18.1.30.1.16`
eqlNASStatsClusterTrafficRateNfsIOPSOther The number of NFS IO other operations per second per cluster.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.12740.18.1.30.1.17`
eqlNASStatsClusterTrafficRateCifsIOPSRead The number of CIFS IO read operations per second per cluster.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.12740.18.1.30.1.18`
eqlNASStatsClusterTrafficRateCifsIOPSWrite The number of CIFS IO write operations per second per cluster.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.12740.18.1.30.1.19`
eqlNASStatsClusterTrafficRateCifsIOPSOther The number of CIFS IO other operations per second per cluster.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.12740.18.1.30.1.20`
eqlNASStatsClusterTrafficRateTotalPrimaryMBsPerSec The total number of primary MBs per second per cluster.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.12740.18.1.30.1.21`
eqlNASStatsClusterTrafficRateTotalSecondaryMBsPerSec The total number of secondary MBs per second per cluster.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.12740.18.1.30.1.22`

eqlNASStatsControllerTrafficRateTable

table

.1.3.6.1.4.1.12740.18.1.31 · 1 row entry · 24 columns

Open in standard view

Uses the equallogic variant from /opt/observium/mibs/equallogic.

Command help

Walk eqlNASStatsControllerTrafficRateTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLNAS-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLNAS-MIB::eqlNASStatsControllerTrafficRateTable'

EqualLogic-Dynamic
This table contains NAS traffic rate statistics for the NAS controller.
TimeoutAll:60

eqlNASStatsControllerTrafficRateEntry row .1.3.6.1.4.1.12740.18.1.31.1

An entry (row) containing NAS controller traffic rate statistics.

Indexes

Column	Syntax	OID
eqlNASStatsControllerTrafficRateIndex NAS controller index.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.12740.18.1.31.1.1`
eqlNASStatsControllerTrafficRateTimestamp This field specifies the date/time when the statistics were collected. Time is represented as the time in seconds since 00:00:00 UTC, 1970-01-01.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.12740.18.1.31.1.2`
eqlNASStatsControllerTrafficRateNfsReadMBsPerSec The number of MBs read per second via NFS per controller.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.12740.18.1.31.1.3`
eqlNASStatsControllerTrafficRateNfsWriteMBsPerSec The number of MBs written per second via NFS per controller.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.12740.18.1.31.1.4`
eqlNASStatsControllerTrafficRateNdmpReadMBsPerSec The number of MBs read per second via NDMP per controller.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.12740.18.1.31.1.5`
eqlNASStatsControllerTrafficRateNdmpWriteMBsPerSec The number of MBs written per second via NDMP per controller.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.12740.18.1.31.1.6`
eqlNASStatsControllerTrafficRateCifsReadMBsPerSec The number of MBs read per second via CIFS per controller.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.12740.18.1.31.1.7`
eqlNASStatsControllerTrafficRateCifsWriteMBsPerSec The number of MBs written per second via CIFS per controller	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.12740.18.1.31.1.8`
eqlNASStatsControllerTrafficRateReplicationReadMBsPerSec The number of replication MBs read per second per controller.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.12740.18.1.31.1.9`
eqlNASStatsControllerTrafficRateReplicationWriteMBsPerSec The number of replication MBs written per second per controller.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.12740.18.1.31.1.10`
eqlNASStatsControllerTrafficRateStorageSubSystemReadMBsPerSec The number of storage subsytem MBs read per second per controller.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.12740.18.1.31.1.11`
eqlNASStatsControllerTrafficRateStorageSubSystemWriteMBsPerSec The number of storage subsystem MBs written per second per controller.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.12740.18.1.31.1.12`
eqlNASStatsControllerTrafficRateNetworkOverheadReadMBsPerSec The number of network overhead MBs per second per controller.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.12740.18.1.31.1.13`
eqlNASStatsControllerTrafficRateNetworkOverheadWriteMBsPerSec The number of network overhead MBs per second per controller.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.12740.18.1.31.1.14`
eqlNASStatsControllerTrafficRateNetworkPacketDropsPerSec The number of network packet drops per second per controller.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.12740.18.1.31.1.15`
eqlNASStatsControllerTrafficRateNfsIOPSRead The number of NFS IO read operations per second per controller.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.12740.18.1.31.1.16`
eqlNASStatsControllerTrafficRateNfsIOPSWrite The number of NFS IO write operations per second per controller.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.12740.18.1.31.1.17`
eqlNASStatsControllerTrafficRateNfsIOPSOther The number of NFS IO other operations per second per controller.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.12740.18.1.31.1.18`
eqlNASStatsControllerTrafficRateCifsIOPSRead The number of CIFS IO read operations per second per controller.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.12740.18.1.31.1.19`
eqlNASStatsControllerTrafficRateCifsIOPSWrite The number of CIFS IO write operations per second per controller.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.12740.18.1.31.1.20`
eqlNASStatsControllerTrafficRateCifsIOPSOther The number of CIFS IO other operations per second per controller.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.12740.18.1.31.1.21`
eqlNASStatsControllerTrafficRateTotalPrimaryMBsPerSec The total primary MBs per second per controller.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.12740.18.1.31.1.22`
eqlNASStatsControllerTrafficRateTotalPrimaryMBsPerSecToAverage The total primary MBs per second average per controller.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.12740.18.1.31.1.23`
eqlNASStatsControllerTrafficRateTotalSecondaryMBsPerSec The total secondary MBs per second per controller.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.12740.18.1.31.1.24`

eqlNASStatsControllerLoadBalancingTable

table

.1.3.6.1.4.1.12740.18.1.31.2 · 1 row entry · 4 columns

Open in standard view

Uses the equallogic variant from /opt/observium/mibs/equallogic.

Command help

Walk eqlNASStatsControllerLoadBalancingTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLNAS-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLNAS-MIB::eqlNASStatsControllerLoadBalancingTable'

EqualLogic-Dynamic 
NAS controller load balancing statistics table.
TimeoutAll:60

eqlNASStatsControllerLoadBalancingEntry row .1.3.6.1.4.1.12740.18.1.31.2.1

An entry (row) containing controller load balancing statistics.

Indexes

EQLAPPLIANCE-MIBeqlApplianceIndex eqlNASStatsControllerLoadBalancingIndex

Column	Syntax	OID
eqlNASStatsControllerLoadBalancingIndex NAS controller index.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.12740.18.1.31.2.1.1`
eqlNASStatsControllerLoadBalancingTimestamp This field specifies the date/time when the statistics were collected. Time is represented as the time in seconds since 00:00:00 UTC, 1970-01-01.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.12740.18.1.31.2.1.2`
eqlNASStatsControllerCPULoadPercent The percentage of time the CPU is executing instructions.	%SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.12740.18.1.31.2.1.3`
eqlNASStatsControllerTotalCifsConnections The total number of CIFS connections terminated on the controller.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.12740.18.1.31.2.1.4`

eqlNASCacheInfoTable

table

.1.3.6.1.4.1.12740.18.1.40 · 1 row entry · 5 columns

Open in standard view

Uses the equallogic variant from /opt/observium/mibs/equallogic.

Command help

Walk eqlNASCacheInfoTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLNAS-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLNAS-MIB::eqlNASCacheInfoTable'

EqualLogic-Dynamic 
This table contains NAS Cache information.
TimeoutAll:60

eqlNASCacheInfoEntry row .1.3.6.1.4.1.12740.18.1.40.1

An entry (row) containing NAS cache information.

Indexes

EQLAPPLIANCE-MIBeqlApplianceIndex eqlNASCacheInfoIndex

Column Syntax OID

eqlNASCacheInfoIndex

Cache index of the cached index.

eqlNASCacheInfoCacheObjectName

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.18.1.40.1.1

Name of the cached object.

OctetString

Constraints:
range: 1-64

.1.3.6.1.4.1.12740.18.1.40.1.2

eqlNASCacheInfoCacheObjectExpiryTime

Cache refresh time in seconds. A value of 0 means this is a persistent cache.

eqlNASCacheInfoCacheObjectState

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.18.1.40.1.3

Current cached object state.

OctetStringr/w

Constraints:
range: 1-64

.1.3.6.1.4.1.12740.18.1.40.1.4

eqlNASCacheInfoAction

Action on this NAS cache.

Enumerationr/w

Enumerated Values:

0	none
1	refresh-all
2	refresh
3	restart-agent

.1.3.6.1.4.1.12740.18.1.40.1.5

eqlNASReplHistoryTable

table

.1.3.6.1.4.1.12740.18.1.41 · 1 row entry · 10 columns

Open in standard view

Uses the equallogic variant from /opt/observium/mibs/equallogic.

Command help

Walk eqlNASReplHistoryTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLNAS-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLNAS-MIB::eqlNASReplHistoryTable'

EqualLogic-Dynamic table used to hold NAS replication history data.
Used with FluidFS version 3.0 and later versions. For FluidFS version 2.0
the table eqlNASReplicationHistory is used instead.

eqlNASReplHistoryEntry row .1.3.6.1.4.1.12740.18.1.41.1

An entry (row) containing the NAS Replication history information.

Indexes

EQLAPPLIANCE-MIBeqlApplianceIndex eqlNASContainerIndex eqlNASReplHistoryUniqueId

Column Syntax OID

eqlNASReplHistoryUniqueId

Unique ID assigned by Fluid FS 3.0 software

eqlNASReplHistoryEventTime

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.18.1.41.1.1

Time when event was recorded by the FluidFS. Often the same as the end time.

eqlNASReplHistorySourceContainerName

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.12740.18.1.41.1.2

Name of source NAS container being replicated.

NASContainerNameType

Type Constraints:
range: 1..230

.1.3.6.1.4.1.12740.18.1.41.1.3

eqlNASReplHistorySourceClusterName

Name of source cluster where source container exists. This is not currenlty required
so if memory is limited, this could be deleted from the MIB.

ClusterNameType

Type Constraints:
range: 1..64

.1.3.6.1.4.1.12740.18.1.41.1.4

eqlNASReplHistoryDestContainerName

Name of destination NAS container receiving replication data

NASContainerNameType

Type Constraints:
range: 1..230

.1.3.6.1.4.1.12740.18.1.41.1.5

eqlNASReplHistoryDestClusterName

Name of destination cluster where destionation container exists

ClusterNameType

Type Constraints:
range: 1..64

.1.3.6.1.4.1.12740.18.1.41.1.6

eqlNASReplHistoryStartTime

Start time for replication

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.12740.18.1.41.1.7

eqlNASReplHistoryEndTime

End time for replication

eqlNASReplHistoryTransferredMb

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.12740.18.1.41.1.8

Number of megabytes transferred.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.18.1.41.1.9

eqlNASReplHistoryStatus

The status of this replication relationship. Mainly use value 'finished' or 'failed'.

EQLAPPLIANCE-MIBeqlApplianceIndex eqlNASTaskIndex

Type Values:

0	unknown
1	idle
2	active
3	waitingretry
4	failed
5	paused
6	cancelled
7	resuming
8	deleting
9	pausing
10	finished
11	cancelling
12	promoted
13	promoting
14	idlewaittoschedule
15	demoting

.1.3.6.1.4.1.12740.18.1.41.1.10

eqlNASTaskTable

table

.1.3.6.1.4.1.12740.18.1.42 · 1 row entry · 10 columns

Open in standard view

Uses the equallogic variant from /opt/observium/mibs/equallogic.

Command help

Walk eqlNASTaskTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLNAS-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLNAS-MIB::eqlNASTaskTable'

EqualLogic-Persistent task table. 
A row in this table represents a task currently executing in the NAS.

eqlNASTaskEntry row .1.3.6.1.4.1.12740.18.1.42.1

A row in the table represents a task. Any given task will have multiple sub tasks. Each sub task involves executing a management operation. The system will execute each sub task one after another until the task is comp…

Indexes

Column Syntax OID

eqlNASTaskIndex

This field specifies an index that uniquely identifies a task.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.18.1.42.1.1

eqlNASTaskRowStatus

This field is used to manage the conceptual row.

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.12740.18.1.42.1.2

eqlNASTaskType

This field represents the type of the task.

Enumerationr/w

Enumerated Values:

1	resync
2	failback

.1.3.6.1.4.1.12740.18.1.42.1.3

eqlNASTaskContext

A generic task context

OctetStringr/w

Constraints:
range: 1-256

.1.3.6.1.4.1.12740.18.1.42.1.4

eqlNASTaskNumSubTasks

Number of subtasks in this task.

eqlNASTaskSubTaskInProgress

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.18.1.42.1.5

Subtask that is currently in progress for this task.

Enumerationr/w

Enumerated Values:

0	none
100	resync-primaryContainerPromote
110	resync-primaryContainerReplicationDelete
120	resync-recoveryContainerReplicationConfigure
130	resync-recoveryContainerReplicate
140	resync-recoveryContainerSourcePromote
150	resync-recoveryContainerReplicationDelete
160	resync-primaryContainerReplicationConfigure
170	resync-recoveryContainerPromote
300	failback-primaryContainerPromote
310	failback-primaryContainerReplicationDelete
320	failback-recoveryContainerReplicationConfigure
330	failback-recoveryContainerDisableSchedules
340	failback-recoveryContainerReplicate
350	failback-recoveryContainerFinalReplication
360	failback-recoveryContainerPromote
370	failback-recoveryContainerReplicationDelete
380	failback-primaryContainerReplicationConfigure
10000	complete

.1.3.6.1.4.1.12740.18.1.42.1.6

eqlNASTaskSubtaskStatus

Status of currently executing subtask.

EQLAPPLIANCE-MIBeqlApplianceIndex eqlNASContainerIndex eqlNASReplSiteRemoteClusterId eqlNASTaskContainerReplInfoRemoteFSId

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.18.1.42.1.7

eqlNASTaskStatus

set to true if user action is required for the task to proceed further.

Enumerationr/w

Enumerated Values:

1	user-action-required
2	in-progress
3	complete

.1.3.6.1.4.1.12740.18.1.42.1.8

eqlNASTaskUserAction

user action on the task.

Enumerationr/w

Enumerated Values:

retry

.1.3.6.1.4.1.12740.18.1.42.1.9

eqlNASTaskStartTime

time at which this task started represented as number of seconds since epoch.

secondsSNMPv2-SMICounter32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.18.1.42.1.10

eqlNASTaskContainerReplInfoTable

table

.1.3.6.1.4.1.12740.18.1.43 · 1 row entry · 8 columns

Open in standard view

Uses the equallogic variant from /opt/observium/mibs/equallogic.

Command help

Walk eqlNASTaskContainerReplInfoTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLNAS-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLNAS-MIB::eqlNASTaskContainerReplInfoTable'

EqualLogic-Persistent
TimeoutAll:60
This table is used to track the replication relationship on the NAS Container which has a NAS task

eqlNASTaskContainerReplInfoEntry row .1.3.6.1.4.1.12740.18.1.43.1

Indexes

Column Syntax OID

eqlNASTaskContainerReplInfoRowStatus

The status of the row

eqlNASTaskContainerReplInfoRemoteFSId

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.12740.18.1.43.1.1

Unique Identifier for the remote container. This is the FSid.

eqlNASTaskContainerReplInfoVolumeReplSiteIndex

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.18.1.43.1.2

The value of eqliscsiVolumeReplSiteIndex to index into
eqliscsiVolumeReplSiteTable.

EQLVOLUME-MIBSiteIndexr/w

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.12740.18.1.43.1.3

eqlNASTaskContainerReplInfoRemoteClusterName

This field specifies the remote cluster name, which is the
eqlApplianceName of the remote cluster.

OctetString

Constraints:
range: 1-64

.1.3.6.1.4.1.12740.18.1.43.1.4

eqlNASTaskContainerReplInfoLocalFSName

Name used to identify the local NAS Container. Contains
only letters, digits and underscores. Must begin with either
letter or an underscore.

OctetStringr/w

Constraints:
range: 1-230

.1.3.6.1.4.1.12740.18.1.43.1.5

eqlNASTaskContainerReplInfoRemoteFSName

Name used to identify the remote NAS Container. Contains
only letters, digits and underscores. Must begin with either
letter or an underscore.

OctetStringr/w

Constraints:
range: 1-230

.1.3.6.1.4.1.12740.18.1.43.1.6

eqlNASTaskContainerReplInfoLocalClusterId

Local Cluster Id.

ClusterIdTyper/w

Type Constraints:
range: 0..50

.1.3.6.1.4.1.12740.18.1.43.1.7

eqlNASTaskContainerReplInfoTaskId

This field specifies an Id that uniquely identifies a task.

EQLAPPLIANCE-MIBeqlApplianceIndex eqlNASContainerIndex

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.18.1.43.1.8

eqlNASLostContainerTable

table

.1.3.6.1.4.1.12740.18.1.44 · 1 row entry · 5 columns

Open in standard view

Uses the equallogic variant from /opt/observium/mibs/equallogic.

Command help

Walk eqlNASLostContainerTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLNAS-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLNAS-MIB::eqlNASLostContainerTable'

EqualLogic-Dynamic Appliance Table.
This table contains a list of NAS Appliance configurations for containers lost during a configuration restore.
TimeoutAll:60

eqlNASLostContainerEntry row .1.3.6.1.4.1.12740.18.1.44.1

An entry (row) containing NAS Lost Container info.

Indexes

Column Syntax OID

eqlNASLostContainerRowStatus

Row status variable used to manage this row.

eqlNASLostContainerCapacity

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.12740.18.1.44.1.1

eqlNASLostContainerName

Name used to identify NAS Container. Contains only letters, digits and underscores. Must begin with either letter or an underscore.

OctetStringr/w

Constraints:
range: 1-230

.1.3.6.1.4.1.12740.18.1.44.1.2

Size of NAS Container in MB.

eqlNASLostContainerUsedSpaceAlert

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.18.1.44.1.3

Alert user when NAS container used space reaches certain % value of NAS container size.Default value is choosen from eqlNASApplianceConfigUsedSpaceAlert

eqlNASLostContainerSnapshotUsedSpaceAlert

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.18.1.44.1.4

Alert user when NAS container snapshot used space reaches certain % value of NAS container snapshot size.Default value is choosen from eqlNASApplianceConfigSnapSpaceAlert

EQLAPPLIANCE-MIBeqlApplianceIndex EQLAPPLIANCE-MIBeqlApplianceNetworkID eqlNASSanStaticRouteNetworkAddrType eqlNASSanStaticRouteNetworkAddr eqlNASSanStaticRouteNetworkMaskType eqlNASSanStaticRouteNetworkMask

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.18.1.44.1.5

eqlNASSanStaticRouteTable

table

.1.3.6.1.4.1.12740.18.1.45 · 1 row entry · 7 columns

Open in standard view

Uses the equallogic variant from /opt/observium/mibs/equallogic.

Command help

Walk eqlNASSanStaticRouteTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLNAS-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLNAS-MIB::eqlNASSanStaticRouteTable'

EqualLogic-Dynamic
This table is used to manage static route entries on NAS cluster. The 
static route entries are used to route SAN traffic from cluster members 
to gateways on the SAN network.
TimeoutAll:60

eqlNASSanStaticRouteEntry row .1.3.6.1.4.1.12740.18.1.45.1

Indexes

Column Syntax OID

eqlNASSanStaticRouteRowStatus

The status of the row

eqlNASSanStaticRouteNetworkAddrType

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.12740.18.1.45.1.1

This field specifies the type of address (v4/v6) for the
Network address of the static route.

eqlNASSanStaticRouteNetworkAddr

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.12740.18.1.45.1.2

This field contains the Network IP address for the static
route (e.g., 200.200.200.0)

eqlNASSanStaticRouteNetworkMaskType

Type Constraints:
range: 0..255

.1.3.6.1.4.1.12740.18.1.45.1.3

This field specifies the type (v4/v6) for the
Network mask of the static route.

eqlNASSanStaticRouteNetworkMask

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.12740.18.1.45.1.4

This field contains the Network mask for the static route
(e.g., 255.255.255.0). The IP address type of the mask is
assumed to be the same as that of the network address

eqlNASSanStaticRouteGatewayAddrType

Type Constraints:
range: 0..255

.1.3.6.1.4.1.12740.18.1.45.1.5

This field specifies the type of address (v4/v6) of the
gateway IP address.

eqlNASSanStaticRouteGatewayAddr

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.12740.18.1.45.1.6

This field contains the gateway IP address for the static
route (e.g., 10.127.20.30)