EQLCONTROLLER-MIB Table View

EqualLogic-Dynamic Member Controller Table. 
This table contains controller status information. 
One table entry per controller. It is indexed by controller slot number. 
The number of entries is equal to the number of controllers that are present in the system

eqlControllerEntry row .1.3.6.1.4.1.12740.4.1.1.1

An entry (row) containing controller status information.

Indexes

EQLGROUP-MIBeqlGroupId EQLMEMBER-MIBeqlMemberIndex eqlControllerIndex

Column	Syntax	OID
eqlControllerIndex The index value that uniquely identifies the controller. It is equal to the controller slot number. The minimum slot number is 1	Integer32 Constraints: range: 1-2	.1.3.6.1.4.1.12740.4.1.1.1.1
eqlControllerModel This variable specifies controller model. Is value of Part=	OctetString Constraints: range: 0-32	.1.3.6.1.4.1.12740.4.1.1.1.2
eqlControllerCMRevision CM version number; Is value of Rev=	OctetString Constraints: range: 0-9	.1.3.6.1.4.1.12740.4.1.1.1.3
eqlControllerSwRevision This variable specifies the customer visible controller software revision.	OctetString Constraints: range: 0-96	.1.3.6.1.4.1.12740.4.1.1.1.4
eqlControllerBatteryStatus This variable specifies controller battery status.	Enumeration Enumerated Values: 1 ok 2 failed 3 good-battery-is-charging 4 low-voltage-status 5 low-voltage-is-charging 6 missing-battery	.1.3.6.1.4.1.12740.4.1.1.1.5
eqlControllerUpTime This variable specifies time interval since the controller was last booted in seconds.	secondsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.12740.4.1.1.1.6
eqlControllerProcessorTemp This variable specifies the temperature in Celsius.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.12740.4.1.1.1.7
eqlControllerChipsetTemp This variable specifies the temperature in Celsius.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.12740.4.1.1.1.8
eqlControllerPrimaryOrSecondary This variable specifies if the controller is a primary or secondary controller.	Enumeration Enumerated Values: 1 primary 2 secondary	.1.3.6.1.4.1.12740.4.1.1.1.9
eqlControllerPrimaryFlashImageRev The revision of the primary flash image.	OctetString Constraints: range: 0-40	.1.3.6.1.4.1.12740.4.1.1.1.10
eqlControllerSecondaryFlashImageRev The revision of the secondary flash image.	OctetString Constraints: range: 0-40	.1.3.6.1.4.1.12740.4.1.1.1.11
eqlControllerSerialNumber This variable specifies controller serial number. Is value of SN=	OctetString Constraints: range: 0-10	.1.3.6.1.4.1.12740.4.1.1.1.12
eqlControllerDate This variable specifies date of mfg of the CM. Is value of Date=	OctetString Constraints: range: 0-10	.1.3.6.1.4.1.12740.4.1.1.1.13
eqlControllerECO This variable specifies eco level of the CM. Is value of ECO=	OctetString Constraints: range: 0-10	.1.3.6.1.4.1.12740.4.1.1.1.14
eqlControllerEEprom The contents of the eeprom.	OctetString Constraints: range: 256-256	.1.3.6.1.4.1.12740.4.1.1.1.15
eqlControllerPLDrev This variable specifies pld version number.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.12740.4.1.1.1.16
eqlControllerPlatformType This variable specifies the platform type. If the number is negative its a simulator. If zero its an eval platform. If >= 1 is the version of the pss board -- does this mean cm rev?	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.12740.4.1.1.1.17
eqlControllerPlatformVersion This variable specifies the version of the pss board (ie CM?)	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.12740.4.1.1.1.18
eqlControllerCPUPass This variable specifies silicon rev.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.12740.4.1.1.1.19
eqlControllerCPUrev This variable specifies the revision of the cpu.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.12740.4.1.1.1.20
eqlControllerCPUfreq This variable specifies the cpu freq in MHz.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.12740.4.1.1.1.21
eqlControllerPhysRam This variable specifies the amount of physical memory in MB.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.12740.4.1.1.1.22
eqlControllerBootRomVersion This variable specifies the bootrom version number.	OctetString Constraints: range: 0-16	.1.3.6.1.4.1.12740.4.1.1.1.23
eqlControllerBootRomBuildDate This variable specifies the date and time bootrom image was built.	OctetString Constraints: range: 128-128	.1.3.6.1.4.1.12740.4.1.1.1.24
eqlControllerInfoMsg This variable is basic info on the cpu at bootup.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.12740.4.1.1.1.25
eqlControllerAthenaSataVersion This variable is the Athena Sata revision for all Athena chips.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.12740.4.1.1.1.26
eqlControllerMajorVersion This variable specifies the major version number of the software present on the controller module.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.12740.4.1.1.1.27
eqlControllerMinorVersion This variable specifies the minor version number of the software present on the controller module.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.12740.4.1.1.1.28
eqlControllerMaintenanceVersion This variable specifies the maintenance version number of the software present on the controller module.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.12740.4.1.1.1.29
eqlControllerSWCompatibilityLevel This variable specifies the compatibility level of the software present on the controller module.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.12740.4.1.1.1.30
eqlControllerFullSwRevision This variable specifies controller software revision.	OctetString Constraints: range: 0-96	.1.3.6.1.4.1.12740.4.1.1.1.31
eqlControllerNVRAMBattery This variable represents the NVRAM Battery on CM. Value would be zero if there is no NVRAM Battery( old CM).	Enumeration Enumerated Values: 0 not-present 1 good 2 bad 3 unknown	.1.3.6.1.4.1.12740.4.1.1.1.32
eqlControllerSerialNumber2 This variable specifies controller serial number. Is value of SN=.The eqlControllerSerialNumber is deprecated because this value can be upto 15 characters for manhattan.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.12740.4.1.1.1.33
eqlControllerType This variable specifies the type of the controller module. Ex: Type II	OctetString Constraints: range: 0-32	.1.3.6.1.4.1.12740.4.1.1.1.34
eqlControllerBootTime This variable specifies time at which the controller was booted expressed as seconds since epoch.	secondsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.12740.4.1.1.1.35

EqualLogic-Dynamic Backplane Table. 
This table contains backplane status information. 
There is only one table entry for the one backplane per PSA.

eqlBackplaneEntry row .1.3.6.1.4.1.12740.4.4.1.1

An entry (row) containing backplane status information.

Indexes

EQLGROUP-MIBeqlGroupId EQLMEMBER-MIBeqlMemberIndex eqlBackplaneIndex

Column	Syntax	OID
eqlBackplaneIndex The index value that uniquely identifies the backplane. A well chosen number for the index is 1. It is in fact the only valid index.	Integer32 Constraints: range: 1-2	.1.3.6.1.4.1.12740.4.4.1.1.1
eqlBackplanePartNum This variable specifies part number of the backplane.	OctetString Constraints: range: 0-10	.1.3.6.1.4.1.12740.4.4.1.1.2
eqlBackplaneRev This variable specifies revision of the backplane. Is value of Rev=	OctetString Constraints: range: 0-10	.1.3.6.1.4.1.12740.4.4.1.1.3
eqlBackplaneDate This variable specifies date of mfg of the backplane.	OctetString Constraints: range: 0-10	.1.3.6.1.4.1.12740.4.4.1.1.4
eqlBackplaneSN This variable specifies serial number of the backplane.	OctetString Constraints: range: 0-10	.1.3.6.1.4.1.12740.4.4.1.1.5
eqlBackplaneECO This variable specifies eco level of the backplane.	OctetString Constraints: range: 0-10	.1.3.6.1.4.1.12740.4.4.1.1.6
eqlBackplaneEEprom The contents of the eeprom.	OctetString Constraints: range: 256-256	.1.3.6.1.4.1.12740.4.4.1.1.7
eqlBackplaneSN2 This variable specifies the backplane serial number. Is value of SN=.The eqlBackplaneSN is deprecated because this value can be up to 15 characters for manhattan.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.12740.4.4.1.1.8
eqlBackplaneType This variable specifies the backplane type.	OctetString Constraints: range: 0-32	.1.3.6.1.4.1.12740.4.4.1.1.9
eqlBackplaneTypeId This variable specifies the backplane type as an Id. Used for Globalization.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.12740.4.4.1.1.10

EqualLogic-Dynamic Member EMM Table. 
This table contains enclosure management status information. 
One table entry per emm. It is indexed by emm index.
The number of entries is equal to the number of emms that are present in the system

eqlEMMEntry row .1.3.6.1.4.1.12740.4.7.1.1

An entry (row) containing emm status information.

Indexes

EQLGROUP-MIBeqlGroupId EQLMEMBER-MIBeqlMemberIndex eqlEMMIndex

Column	Syntax	OID
eqlEMMIndex The index value that uniquely identifies the EMM subsystem.	Integer32 Constraints: range: 1-3	.1.3.6.1.4.1.12740.4.7.1.1.1
eqlEMMModel This variable specifies controller model. Is value of Part=	OctetString Constraints: range: 0-32	.1.3.6.1.4.1.12740.4.7.1.1.2
eqlEMMPartNum This variable specifies part number of the CM.	OctetString Constraints: range: 0-10	.1.3.6.1.4.1.12740.4.7.1.1.3
eqlEMMRev This variable specifies revision of the CM.	OctetString Constraints: range: 0-10	.1.3.6.1.4.1.12740.4.7.1.1.4
eqlEMMDate This variable specifies date of mfg of the CM.	OctetString Constraints: range: 0-10	.1.3.6.1.4.1.12740.4.7.1.1.5
eqlEMMSN This variable specifies serial number of the CM.	OctetString Constraints: range: 0-10	.1.3.6.1.4.1.12740.4.7.1.1.6
eqlEMMECO This variable specifies eco level of the CM.	OctetString Constraints: range: 0-10	.1.3.6.1.4.1.12740.4.7.1.1.7
eqlEMMEEprom The contents of the eeprom.	OctetString Constraints: range: 256-256	.1.3.6.1.4.1.12740.4.7.1.1.8
eqlEMMSN2 This variable specifies the serial number. Is value of SN=.The eqlEMMSN is deprecated because this value can be up to 15 characters for manhattan.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.12740.4.7.1.1.9

EqualLogic-Dynamic Member DaughterCard Table. 
This table contains daughter card information. 
One table entry per daughter card. It is indexed by daughter card index.
The number of entries is equal to the number of daughter cards that are present in the system

eqlDaughterCardEntry row .1.3.6.1.4.1.12740.4.10.1.1

An entry (row) containing daughter card information.

Indexes

EQLGROUP-MIBeqlGroupId EQLMEMBER-MIBeqlMemberIndex eqlDaughterCardIndex

Column	Syntax	OID
eqlDaughterCardIndex The index value that uniquely identifies the DaughterCard subsystem. 1 based	Integer32 Constraints: range: 1-2	.1.3.6.1.4.1.12740.4.10.1.1.1
eqlDaughterCardModel This variable specifies controller model. Is value of Part=	OctetString Constraints: range: 0-32	.1.3.6.1.4.1.12740.4.10.1.1.2
eqlDaughterCardPartNum This variable specifies part number of the daughter card.	OctetString Constraints: range: 0-10	.1.3.6.1.4.1.12740.4.10.1.1.3
eqlDaughterCardRev This variable specifies revision of the daughter card.	OctetString Constraints: range: 0-10	.1.3.6.1.4.1.12740.4.10.1.1.4
eqlDaughterCardDate This variable specifies date of mfg of the daughter card.	OctetString Constraints: range: 0-10	.1.3.6.1.4.1.12740.4.10.1.1.5
eqlDaughterCardSN This variable specifies serial number of the daughter card.	OctetString Constraints: range: 0-10	.1.3.6.1.4.1.12740.4.10.1.1.6
eqlDaughterCardECO This variable specifies eco level of the daughter card.	OctetString Constraints: range: 0-10	.1.3.6.1.4.1.12740.4.10.1.1.7
eqlDaughterCardEEprom The contents of the eeprom.	OctetString Constraints: range: 256-256	.1.3.6.1.4.1.12740.4.10.1.1.8

EqualLogic-Dynamic Member ChannelCard Table. 
This table contains channel card information. 
One table entry per channel card. It is indexed by channel card index.
The number of entries is equal to the number of channel cards that are present in the system

eqlChannelCardEntry row .1.3.6.1.4.1.12740.4.13.1.1

An entry (row) containing channel card information.

Indexes

EQLGROUP-MIBeqlGroupId EQLMEMBER-MIBeqlMemberIndex eqlChannelCardIndex

Column	Syntax	OID
eqlChannelCardIndex The index value that uniquely identifies the ChannelCard subsystem.	Unsigned32 Constraints: range: 1-100	.1.3.6.1.4.1.12740.4.13.1.1.1
eqlChannelCardSerialNumber This variable specifies serial number of the card.	OctetString Constraints: range: 0-64	.1.3.6.1.4.1.12740.4.13.1.1.2
eqlChannelCardFirmwareRev This variable specifies firmware revision of the card.	OctetString Constraints: range: 0-64	.1.3.6.1.4.1.12740.4.13.1.1.3
eqlChannelCardInitRev This variable specifies revision of the initialization configuration file.	OctetString Constraints: range: 0-64	.1.3.6.1.4.1.12740.4.13.1.1.4
eqlChannelCardStatus This variable specifies the status of the channel card .	Enumeration Enumerated Values: 0 unknown 1 not-present 2 failed 3 good	.1.3.6.1.4.1.12740.4.13.1.1.5

EqualLogic-Dynamic Member SFP Table. 
This table contains SFP information. 
One table entry per SFP. It is indexed by SFP index.
The number of entries is equal to the number of SFPs that are present in the system

eqlSFPEntry row .1.3.6.1.4.1.12740.4.14.1.1

An entry (row) containing SFP information.

Indexes

EQLGROUP-MIBeqlGroupId EQLMEMBER-MIBeqlMemberIndex eqlSFPIndex

Column	Syntax	OID
eqlSFPIndex The index value that uniquely identifies the SFP.	Unsigned32 Constraints: range: 1-100	.1.3.6.1.4.1.12740.4.14.1.1.1
eqlSFPMode This variable specifies the mode of the SFP.	Enumeration Enumerated Values: 0 unknown 1 single-mode 2 multi-mode 3 copper 4 not-present	.1.3.6.1.4.1.12740.4.14.1.1.2
eqlSFPIfIndex Index of the interface attached to the SFP.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.12740.4.14.1.1.3
eqlSFPIdentifier Identifies the SFP.	Enumeration Enumerated Values: 0 unknown 3 sfp-transceiver	.1.3.6.1.4.1.12740.4.14.1.1.4
eqlSFPConnector type of the SFP connector.	Enumeration Enumerated Values: 0 unknown 7 lc 33 copper	.1.3.6.1.4.1.12740.4.14.1.1.5
eqlSFPBitrate Bit rate of the SFP in units of 100 Mbits/sec. 103 => 10300 => 10 Gbps	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.12740.4.14.1.1.6
eqlSFPLength1 If Mode is single mode, length in kilometres, Mode is multi mode, length in units of 10metres of 50/125 um fiber.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.12740.4.14.1.1.7
eqlSFPLength2 If Mode is single mode, length in units of 100metres, Mode is multi mode, length in units of 10metres of 62/125 um fiber.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.12740.4.14.1.1.8
eqlSFPVendorName This variable specifies vendor name of the SFP.	OctetString Constraints: range: 0-16	.1.3.6.1.4.1.12740.4.14.1.1.9
eqlSFPPartNumber This variable specifies part number of the SFP.	OctetString Constraints: range: 0-16	.1.3.6.1.4.1.12740.4.14.1.1.10
eqlSFPFirmwareRev This variable specifies firmware revision of the SFP.	OctetString Constraints: range: 0-16	.1.3.6.1.4.1.12740.4.14.1.1.11
eqlSFPSerialNumber This variable specifies serial number of the SFP.	OctetString Constraints: range: 0-16	.1.3.6.1.4.1.12740.4.14.1.1.12
eqlSFPDateCode This variable specifies date of manufacture of the SFP.	OctetString Constraints: range: 0-16	.1.3.6.1.4.1.12740.4.14.1.1.13
eqlSFPStatus This variable specifies the status of the SFP.	Enumeration Enumerated Values: 0 unknown 1 not-present 2 failed 3 good	.1.3.6.1.4.1.12740.4.14.1.1.14