EQLAPPLIANCE-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
42
Rows
42
Columns
275

eqlApplianceTable

table
.1.3.6.1.4.1.12740.17.1.1 · 1 row entry · 28 columns
Open in standard view
Uses the equallogic variant from /opt/observium/mibs/equallogic.
Command help
Walk eqlApplianceTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLAPPLIANCE-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLAPPLIANCE-MIB::eqlApplianceTable' 
EqualLogic-Persistent Appliance Table.
This table contains a list of appliances that this group is managing.
TimeoutAll:60
eqlApplianceEntry row .1.3.6.1.4.1.12740.17.1.1.1
An entry (row) containing appliance information.
Indexes
Column Syntax OID
eqlApplianceIndex
This field specifies a unique index for identifing a Appliance.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.12740.17.1.1.1.1
eqlApplianceRowStatus
This field is used indicate the status of this entry.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.12740.17.1.1.1.2
eqlApplianceName
EQL-SECONDARY-KEY
This field specifies a user friendly name for an appliance. Allowed characters are alphanumeric and underscore for spartan.
OctetStringr/w
Constraints:
range: 1-64
 .1.3.6.1.4.1.12740.17.1.1.1.3
eqlApplianceType
 Enumerationr/w
Enumerated Values:
1nas
2blade-chassis
 .1.3.6.1.4.1.12740.17.1.1.1.4
eqlApplianceState
 Enumerationr/w
Enumerated Values:
0unconfigured
1000node-setup
1001internal-network
1002san-network
1003client-network
1004configure-gateway
1005start-nodes-validation
1006nodes-validation-inprogress
1007make-cluster
1008send-eql-group-ip
1009create-volume-acls
1010start-format
1011format-in-progress
1012start-system
1013start-system-in-progress
1014configured
1015cluster-name
1016start-nas-appliance-create
1017nas-appliance-create-in-progress
1018start-volume-discovery
 .1.3.6.1.4.1.12740.17.1.1.1.5
eqlApplianceDescription
 SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.12740.17.1.1.1.6
eqlApplianceMgmtAddressType
 INET-ADDRESS-MIBInetAddressTyper/w
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.12740.17.1.1.1.7
eqlApplianceMgmtAddress
 INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.12740.17.1.1.1.8
eqlApplianceMgmtPort
 SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.12740.17.1.1.1.9
eqlApplianceMajorVersion
 SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.12740.17.1.1.1.10
eqlApplianceMinorVersion
 SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.12740.17.1.1.1.11
eqlApplianceMaintVersion
 SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.12740.17.1.1.1.12
eqlApplianceVendorId
 OctetString
Constraints:
range: 0-64
 .1.3.6.1.4.1.12740.17.1.1.1.13
eqlApplianceSharedSecret
This field is used for shared secret authentication.
OctetStringr/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.12740.17.1.1.1.14
eqlApplianceUserName
This field is used for authentication.
OctetStringr/w
Constraints:
range: 0-64
 .1.3.6.1.4.1.12740.17.1.1.1.15
eqlApplianceNumberOfNodes
Number of nodes in this appliance.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.12740.17.1.1.1.16
eqlApplianceUniqueID
Unique ID used by this appliance.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.12740.17.1.1.1.17
eqlApplianceConfigStatus
status of this appliance configuration
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.12740.17.1.1.1.18
eqlApplianceAction
Action on this appliance.
Enumerationr/w
Enumerated Values:
0none
1start
2retry
3abort
4continue
 .1.3.6.1.4.1.12740.17.1.1.1.19
eqlApplianceAdminStatus
Admin status used to manage this appliance.
Enumerationr/w
Enumerated Values:
0down
1up
2maintenance
3delete
 .1.3.6.1.4.1.12740.17.1.1.1.20
eqlApplianceGatewayAddrType
This field specifies the type of address (v4/v6) of the default gateway address for this appliance.
INET-ADDRESS-MIBInetAddressTyper/w
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.12740.17.1.1.1.21
eqlApplianceGatewayAddr
This field contains the address specification of the default gateway address for this appliance.
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.12740.17.1.1.1.22
eqlApplianceLastScheduleIndex
Last used snapshot schedule index. Every time a new schedule is created for the appliance, the new idex is the last used index value from this field plus one, and the field itself is updated with the new value. This wa…
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.12740.17.1.1.1.23
eqlApplianceMPV
Management Protocol Version (MPV) of this appliance.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.12740.17.1.1.1.24
eqlApplianceEnableFTP
This field specifies whether or not to allow ftp access to the appliance.
The default is disabled.
Enumerationr/w
Enumerated Values:
0enabled
1disabled
 .1.3.6.1.4.1.12740.17.1.1.1.25
eqlApplianceDesiredServiceMode
Desired service mode of the appliance.
Enumerationr/w
Enumerated Values:
0normal
1maintenance
 .1.3.6.1.4.1.12740.17.1.1.1.26
eqlApplianceServiceModeStatus
This field specifies the service mode status of the appliance.
Enumeration
Enumerated Values:
0normal
1maintenance
2transition-to-maint
3transition-to-normal
 .1.3.6.1.4.1.12740.17.1.1.1.27
eqlApplianceRequestId
This field represents the operation request identifier.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.12740.17.1.1.1.28

eqlApplianceUniqueIDTable

table
.1.3.6.1.4.1.12740.17.1.2 · 1 row entry · 3 columns
Open in standard view
Uses the equallogic variant from /opt/observium/mibs/equallogic.
Command help
Walk eqlApplianceUniqueIDTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLAPPLIANCE-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLAPPLIANCE-MIB::eqlApplianceUniqueIDTable' 
EqualLogic-Dynamic Unique ID table.
This table is used to retrieve Unique ID values when creating new objects.
TimeoutAll:60
eqlApplianceUniqueIDEntry row .1.3.6.1.4.1.12740.17.1.2.1
An entry (row) containing unique ID information.
Indexes
Column Syntax OID
eqlApplianceUniqueIDType
 Enumeration
Enumerated Values:
1fsid
2userid
3nfsexportname
4partnershipid
5replicationid
 .1.3.6.1.4.1.12740.17.1.2.1.1
eqlApplianceUniqueIDValueLen
Length of the value represented by column eqlApplianceUniqueIDValue
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.12740.17.1.2.1.2
eqlApplianceUniqueIDValue
Value of eqlApplianceUniqueIDType represented in network byte order.
OctetString
Constraints:
range: 255-255
 .1.3.6.1.4.1.12740.17.1.2.1.3

eqlApplianceUnInitNodesTable

table
.1.3.6.1.4.1.12740.17.1.3 · 1 row entry · 13 columns
Open in standard view
Uses the equallogic variant from /opt/observium/mibs/equallogic.
Command help
Walk eqlApplianceUnInitNodesTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLAPPLIANCE-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLAPPLIANCE-MIB::eqlApplianceUnInitNodesTable' 
EqualLogic-Persistent Uninitialized Nodes Table.
This table contains information relating to uninitialized appliances
 discovered during the device discovery process.
TimeoutAll:60
eqlApplianceUnInitNodesEntry row .1.3.6.1.4.1.12740.17.1.3.1
An entry (row) containing uninitialized appliance information.
Indexes
Column Syntax OID
eqlApplianceUnInitNodeProductType
This field indicates the type of device that has been discovered
Enumeration
Enumerated Values:
1nas
 .1.3.6.1.4.1.12740.17.1.3.1.1
eqlApplianceUnInitNodeServiceTag
This field indicates the service tag of the discovered device
OctetString
Constraints:
range: 1-32
 .1.3.6.1.4.1.12740.17.1.3.1.2
eqlApplianceUnInitNodeState
This field indicates the current state of the device (discover or found)
Enumeration
Enumerated Values:
1discover
2found
 .1.3.6.1.4.1.12740.17.1.3.1.3
eqlApplianceUnInitNodeModel
This field indicates the model of the discovered device.
OctetString
Constraints:
range: 1-64
 .1.3.6.1.4.1.12740.17.1.3.1.4
eqlApplianceUnInitNodeVendor
This field indicates the vendor of the discovered device
OctetString
Constraints:
range: 1-64
 .1.3.6.1.4.1.12740.17.1.3.1.5
eqlApplianceUnInitNodeLinkLocalIPType
This field indicates the address type (v4/v6) of the link-local IP associated with the discovered device
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.12740.17.1.3.1.6
eqlApplianceUnInitNodeLinkLocalIP
This field indicates the link-local IP of the device, as returned during the device-discover process
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.12740.17.1.3.1.7
eqlApplianceUnInitNodeMajorVersion
This field indicates the major version of the device discovered
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.12740.17.1.3.1.8
eqlApplianceUnInitNodeMinorVersion
This field indicates the minor version of the device discovered
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.12740.17.1.3.1.9
eqlApplianceUnInitNodeMaintVersion
This field indicates the maintenance version of the device discovered
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.12740.17.1.3.1.10
eqlApplianceUnInitNodeRowStatus
This is used only for support purpose to delete rows in this table.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.12740.17.1.3.1.11
eqlApplianceUnInitNodeClusterMPV
The Management Protocol Version (MPV) the Appliance Cluster.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.12740.17.1.3.1.12
eqlApplianceUnInitNodeChassisTag
This field indicates the service tag of the discovered device chassis
OctetString
Constraints:
range: 1-32
 .1.3.6.1.4.1.12740.17.1.3.1.13

eqlApplianceNodeTable

table
.1.3.6.1.4.1.12740.17.1.4 · 1 row entry · 22 columns
Open in standard view
Uses the equallogic variant from /opt/observium/mibs/equallogic.
Command help
Walk eqlApplianceNodeTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLAPPLIANCE-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLAPPLIANCE-MIB::eqlApplianceNodeTable' 
EqualLogic-Persistent Appliance Node Table
This table is used to store information about Appliance nodes.
TimeoutAll:60
eqlApplianceNodeEntry row .1.3.6.1.4.1.12740.17.1.4.1
An entry (row) containing an node-specific configuration.
Indexes
Column Syntax OID
eqlApplianceNodeIndex
A unique identifier for each configured node within an appliance
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.12740.17.1.4.1.1
eqlApplianceNodeRowStatus
This field is used indicate the status of this entry.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.12740.17.1.4.1.2
eqlApplianceNodeProductType
This field indicates the type of device that has been discovered
Enumeration
Enumerated Values:
1fs7500
2fs7600
3fs7610
 .1.3.6.1.4.1.12740.17.1.4.1.3
eqlApplianceNodeServiceTag
This field indicates the service tag of the discovered device
OctetStringr/w
Constraints:
range: 1-32
 .1.3.6.1.4.1.12740.17.1.4.1.4
eqlApplianceNodeModel
This field indicates the model of the discovered device.
OctetString
Constraints:
range: 1-64
 .1.3.6.1.4.1.12740.17.1.4.1.5
eqlApplianceNodeVendor
This field indicates the vendor of the discovered device
OctetString
Constraints:
range: 1-64
 .1.3.6.1.4.1.12740.17.1.4.1.6
eqlApplianceNodeLinkLocalIPType
This field indicates the address type (v4/v6) of the link-local IP associated with the discovered device
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.12740.17.1.4.1.7
eqlApplianceNodeLinkLocalIP
This field indicates the link-local IP of the device, as returned during the device-discover process
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.12740.17.1.4.1.8
eqlApplianceNodeMajorVersion
This field indicates the major version of the device discovered
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.12740.17.1.4.1.9
eqlApplianceNodeMinorVersion
This field indicates the minor version of the device discovered
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.12740.17.1.4.1.10
eqlApplianceNodeMaintVersion
This field indicates the maintenance version of the device discovered
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.12740.17.1.4.1.11
eqlApplianceNodeName
This field specifies the name used to manage this node.
OctetStringr/w
Constraints:
range: 1-64
 .1.3.6.1.4.1.12740.17.1.4.1.12
eqlApplianceNodePeerIndex
This field specifies the NodeIndex value of peer node if any.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.12740.17.1.4.1.13
eqlApplianceNodeConfigState
This field specifies what configuration state the node is in.
Enumerationr/w
Enumerated Values:
0unconfigured
1001node-setup-complete
1002internal-network-complete
1003san-network-complete
1004client-network-complete
1005gateway-config-complete
1006configured
1007detached
 .1.3.6.1.4.1.12740.17.1.4.1.14
eqlApplianceNodeConfigStatus
Status of current config state.If not zero, then an error occured in configuration
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.12740.17.1.4.1.15
eqlApplianceNodeGatewayAddrType
This field specifies the type of address (v4/v6) of the default gateway address for this node
INET-ADDRESS-MIBInetAddressTyper/w
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.12740.17.1.4.1.16
eqlApplianceNodeGatewayAddr
This field contains the address specification of the default gateway address for this node.
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.12740.17.1.4.1.17
eqlApplianceNodeInitiatorName
The iSCSI name of this node.
OctetStringr/w
Constraints:
range: 0-223
 .1.3.6.1.4.1.12740.17.1.4.1.18
eqlApplianceNodeAdminStatus
Start node detach operation or attach operation.
Enumerationr/w
Enumerated Values:
0on
1detach
2attach
3reset
 .1.3.6.1.4.1.12740.17.1.4.1.19
eqlApplianceNodeChassisTag
This field indicates the service tag of the discovered device chasis
OctetStringr/w
Constraints:
range: 1-32
 .1.3.6.1.4.1.12740.17.1.4.1.20
eqlApplianceNodeChassisName
This field indicates the configured chassis name the discovered device chasis
OctetStringr/w
Constraints:
range: 1-32
 .1.3.6.1.4.1.12740.17.1.4.1.21
eqlApplianceNodeOpsRequestId
This field represents the the operation request identifier.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.12740.17.1.4.1.22

eqlApplianceNetworksTable

table
.1.3.6.1.4.1.12740.17.1.5 · 1 row entry · 12 columns
Open in standard view
Uses the equallogic variant from /opt/observium/mibs/equallogic.
Command help
Walk eqlApplianceNetworksTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLAPPLIANCE-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLAPPLIANCE-MIB::eqlApplianceNetworksTable' 
EqualLogic-Dynamic(semi) Appliance Networks Table 
EqualLogic-DoNotGroupRequest 
This table is used to retrieve network configuration information for an appliance.
TimeoutAll:60
eqlApplianceNetworksEntry row .1.3.6.1.4.1.12740.17.1.5.1
An entry (row) containing a description of network configurations of an appliance.
Indexes
Column Syntax OID
eqlApplianceNetworkRowStatus
This field is used indicate the status of this entry.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.12740.17.1.5.1.1
eqlApplianceNetworkType
This field indicates the type of network being described by this entry
Enumeration
Enumerated Values:
1internal
2san
3client
4backplane
 .1.3.6.1.4.1.12740.17.1.5.1.2
eqlApplianceNetworkID
A unique identifier for each configured network within a network type and appliance
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.12740.17.1.5.1.3
eqlApplianceNetworkName
This field specifies a user friendly name for a network.
OctetStringr/w
Constraints:
range: 1-64
 .1.3.6.1.4.1.12740.17.1.5.1.4
eqlApplianceNetworkBlockIPAddressType
This field specifies the type of address (v4/v6) of the block IP address
INET-ADDRESS-MIBInetAddressTyper/w
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.12740.17.1.5.1.5
eqlApplianceNetworkBlockIPAddress
This field contains the address specification for the block of IPs describing this network
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.12740.17.1.5.1.6
eqlApplianceNetworkBlockNetmaskAddrType
This field specifies the type of address (v4/v6) of the netmask address for this network
INET-ADDRESS-MIBInetAddressTyper/w
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.12740.17.1.5.1.7
eqlApplianceNetworkBlockNetmaskAddr
This field contains the address specification of the netmask describing this network
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.12740.17.1.5.1.8
eqlApplianceNetworkVLANTag
This field specifies the VLAN tag applicable to this network.
Unsigned32r/w
Constraints:
range: 0-4095
 .1.3.6.1.4.1.12740.17.1.5.1.9
eqlApplianceNetworkAdminState
This field indicates the current administrative state of this network entry
Enumerationr/w
Enumerated Values:
1creating
2modifying
3done
 .1.3.6.1.4.1.12740.17.1.5.1.10
eqlApplianceNetworkMTUSize
This field indicates the MTU size supported by this network.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.12740.17.1.5.1.11
eqlApplianceNetworkBondingMode
This field indicates the bonding mode supported by this network.
For spartan, only client network supports modifying the bonding mode.Default mode is ALB (adaptive load balancing) for client network. User can change th…
Enumerationr/w
Enumerated Values:
0alb
1lacp
 .1.3.6.1.4.1.12740.17.1.5.1.12

eqlApplianceIPTable

table
.1.3.6.1.4.1.12740.17.1.6 · 1 row entry · 3 columns
Open in standard view
Uses the equallogic variant from /opt/observium/mibs/equallogic.
Command help
Walk eqlApplianceIPTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLAPPLIANCE-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLAPPLIANCE-MIB::eqlApplianceIPTable' 
EqualLogic-Dynamic(semi) Appliance IP Table
This table is used to retrieve appliance-wide IP addresses
TimeoutAll:60
eqlApplianceIPEntry row .1.3.6.1.4.1.12740.17.1.6.1
An entry (row) containing an appliance-wide IP address configured for an appliance network.
Indexes
Column Syntax OID
eqlApplianceIPRowStatus
This field is used indicate the status of this entry.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.12740.17.1.6.1.1
eqlApplianceIPAddressType
This field specifies the type of address (v4/v6) of this IP address entry
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.12740.17.1.6.1.2
eqlApplianceIPAddress
This field contains the address specification of this IP address entry
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.12740.17.1.6.1.3

eqlApplianceNodeIPTable

table
.1.3.6.1.4.1.12740.17.1.7 · 1 row entry · 3 columns
Open in standard view
Uses the equallogic variant from /opt/observium/mibs/equallogic.
Command help
Walk eqlApplianceNodeIPTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLAPPLIANCE-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLAPPLIANCE-MIB::eqlApplianceNodeIPTable' 
EqualLogic-Dynamic(semi) Appliance Node IP Table
This table is used to retrieve node-specific IP addresses configured with a specific appliance.
TimeoutAll:60
eqlApplianceNodeIPEntry row .1.3.6.1.4.1.12740.17.1.7.1
An entry (row) containing an node-specific IP address configured for an appliance network.
Indexes
Column Syntax OID
eqlApplianceNodeIPRowStatus
This field is used indicate the status of this entry.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.12740.17.1.7.1.1
eqlApplianceNodeIPAddressType
This field specifies the type of address (v4/v6) of this node-specific IP address entry
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.12740.17.1.7.1.2
eqlApplianceNodeIPAddress
This field contains the address specification of this node-specific IP address entry
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.12740.17.1.7.1.3

eqlApplianceOpsTable

table
.1.3.6.1.4.1.12740.17.1.8 · 1 row entry · 6 columns
Open in standard view
Uses the equallogic variant from /opt/observium/mibs/equallogic.
Command help
Walk eqlApplianceOpsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLAPPLIANCE-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLAPPLIANCE-MIB::eqlApplianceOpsTable' 
EqualLogic-Dynamic(semi) Appliance operations table
This table is used to manage operations on appliances. 
For example: In Spartan, operations include validation,format etc.
TimeoutAll:60
eqlApplianceOpsEntry row .1.3.6.1.4.1.12740.17.1.8.1
An entry (row) containing an operation.
Indexes
Column Syntax OID
eqlApplianceOpsIndex
This field specifies a unique index for identifing an operation.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.12740.17.1.8.1.1
eqlApplianceOpsRowStatus
This field is used to manage operations.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.12740.17.1.8.1.2
eqlApplianceOpsType
This field specifies the type of operation.
Enumeration
Enumerated Values:
0none
1validation
2format
3start
4stop
5attach
6expand
7incrementalformat
8detach
9add-pair
10delete
11create-nas-appliance
12discover
13add-nas-appliance
14join-nas-appliance
15diagnostics
16nas-cluster-update
17restore-config
18service-mode-change
19container-cfg-modify
 .1.3.6.1.4.1.12740.17.1.8.1.3
eqlApplianceOpsStatus
This field represents the current status of this operation. In case of errors, this value will represent the error number.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.12740.17.1.8.1.4
eqlApplianceOpsPercentage
This field represents the % of completion for this operation.
Unsigned32
Constraints:
range: 0-100
 .1.3.6.1.4.1.12740.17.1.8.1.5
eqlApplianceOpsRequestId
This field represents the operation request identifier.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.12740.17.1.8.1.6

eqlVolumeApplianceTable

table
.1.3.6.1.4.1.12740.17.1.9 · 1 row entry · 4 columns
Open in standard view
Uses the equallogic variant from /opt/observium/mibs/equallogic.
Command help
Walk eqlVolumeApplianceTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLAPPLIANCE-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLAPPLIANCE-MIB::eqlVolumeApplianceTable' 
EqualLogic-Persistent Appliance Volumes table
This table is used to store what volumes are accessed by which appliance.
TimeoutAll:60
eqlVolumeApplianceEntry row .1.3.6.1.4.1.12740.17.1.9.1
An entry (row) containing the appliance information.
Indexes
No indexes recorded
Column Syntax OID
eqlVolumeApplianceRowStatus
This field is used to manage the rows in this table.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.12740.17.1.9.1.1
eqlVolumeApplianceIndex
This field specifies the appliance index this volume is associated with. This value will never be zero.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.12740.17.1.9.1.2
eqlVolumeApplianceNodeIndex
This field specifies the node index this volume is associated with. This value will be zero if this volume is not associated with a particular node.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.12740.17.1.9.1.3
eqlVolumeApplianceState
This field specifies the state of this volume as seen by the appliance.
Enumerationr/w
Enumerated Values:
0formatpending
1formatted
2expansionpending
 .1.3.6.1.4.1.12740.17.1.9.1.4

eqlApplianceOpsFailureTable

table
.1.3.6.1.4.1.12740.17.1.10 · 1 row entry · 7 columns
Open in standard view
Uses the equallogic variant from /opt/observium/mibs/equallogic.
Command help
Walk eqlApplianceOpsFailureTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLAPPLIANCE-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLAPPLIANCE-MIB::eqlApplianceOpsFailureTable' 
EqualLogic-Dynamic Appliance operations failures table
This table is used to retrieve failure information related to an appliance.
TimeoutAll:60
eqlApplianceOpsFailureEntry row .1.3.6.1.4.1.12740.17.1.10.1
An entry (row) containing an operation.
Indexes
Column Syntax OID
eqlApplianceOpsFailureIndex
This field specifies a unique index for identifing an operation failure.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.12740.17.1.10.1.1
eqlApplianceOpsFailureType
This field specifies the type of operation.
Enumeration
Enumerated Values:
0unknown
1error
2warning
 .1.3.6.1.4.1.12740.17.1.10.1.2
eqlApplianceOpsFailureScope
This field represents the scope of this failure. For spartan, 0 indicates scope of cluster. Non zero indicates the node index this failure is related to.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.12740.17.1.10.1.3
eqlApplianceOpsFailureCode
Error code related to this failure.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.12740.17.1.10.1.4
eqlApplianceOpsFailureComponent
Component related to this failure.
Enumeration
Enumerated Values:
0unknown
1fans
2psus
3cpus
4fc
5monitor
6nics
7ipmi
8ups
9temperatures
10raid
11memory
12connectivity
13network
 .1.3.6.1.4.1.12740.17.1.10.1.5
eqlApplianceOpsFailureSubComponent
This field specifies a user friendly name for the sub-components, e.g. eth32, eth33.
OctetString
Constraints:
range: 1-128
 .1.3.6.1.4.1.12740.17.1.10.1.6
eqlApplianceOpsFailureMessage
This field contains the error message sent by the NAS cluster or controllers.
OctetString
Constraints:
range: 1-256
 .1.3.6.1.4.1.12740.17.1.10.1.7

eqlApplianceNodeHealthFailureTable

table
.1.3.6.1.4.1.12740.17.1.11 · 1 row entry · 6 columns
Open in standard view
Uses the equallogic variant from /opt/observium/mibs/equallogic.
Command help
Walk eqlApplianceNodeHealthFailureTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLAPPLIANCE-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLAPPLIANCE-MIB::eqlApplianceNodeHealthFailureTable' 
EqualLogic-Dynamic Appliance operations failures table
This table is used to retrieve failure information related to an appliance.
TimeoutAll:60
eqlApplianceNodeHealthFailureEntry row .1.3.6.1.4.1.12740.17.1.11.1
An entry (row) containing an operation.
Indexes
Column Syntax OID
eqlApplianceNodeHealthFailureIndex
This field specifies a unique index for identifing an operation failure.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.12740.17.1.11.1.1
eqlApplianceNodeHealthFailureType
This field specifies the type of operation.
Enumeration
Enumerated Values:
0unknown
1error
2warning
 .1.3.6.1.4.1.12740.17.1.11.1.2
eqlApplianceNodeHealthFailureCode
Error code related to this failure.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.12740.17.1.11.1.3
eqlApplianceNodeHealthFailureComponent
Component related to this failure.
Enumeration
Enumerated Values:
0unknown
1power
2network
3internalhw
 .1.3.6.1.4.1.12740.17.1.11.1.4
eqlApplianceNodeHealthFailureSubComponent
This field specifies a user friendly name for the sub-component, e.g. eth32.
OctetString
Constraints:
range: 1-128
 .1.3.6.1.4.1.12740.17.1.11.1.5
eqlApplianceNodeHealthFailureMessage
This field contains the error message sent by the NAS cluster or controllers.
OctetString
Constraints:
range: 1-256
 .1.3.6.1.4.1.12740.17.1.11.1.6

eqlApplianceServiceStatusTable

table
.1.3.6.1.4.1.12740.17.1.12 · 1 row entry · 5 columns
Open in standard view
Uses the equallogic variant from /opt/observium/mibs/equallogic.
Command help
Walk eqlApplianceServiceStatusTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLAPPLIANCE-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLAPPLIANCE-MIB::eqlApplianceServiceStatusTable' 
EqualLogic-Dynamic Appliance service status table
This table is used to retrieve service health status information related to an appliance.
TimeoutAll:60
eqlApplianceServiceStatusEntry row .1.3.6.1.4.1.12740.17.1.12.1
An entry (row) containing service status of an appliance.
Indexes
Column Syntax OID
eqlApplianceOverallState
This field indicates the overall status of the appliance.
Enumeration
Enumerated Values:
0unknown
1on
2off
3stopping
 .1.3.6.1.4.1.12740.17.1.12.1.1
eqlApplianceServiceStatus
This field indicates the service health status of the appliance.
Enumeration
Enumerated Values:
0unknown
1error
2warning
3normal
 .1.3.6.1.4.1.12740.17.1.12.1.2
eqlApplianceServiceCriticalConditions
This field indicates the current critical conditions associated with the appliance
Bits
Enumerated Values:
0exaStoreServiceFaultCacheLoss
1exaStoreServiceFaultServers
2exaStoreServiceNoService
3exaStoreServersFault
4exaStoreStorageSubsysFault
5eqlNASChassisClientNetworkCritical
6eqlNASChassisBackplaneNetworkCritical
7eqlNASChassisInternalNetworkCritical
8eqlNASChassisSanNetworkCritical
9eqlNASChassisFanCritical
10eqlNASControllerAmbientTempCritical
11eqlNASControllerBPSCritical
12eqlNASControllerCPUCritical
13eqlNASControllerFanCritical
14eqlNASControllerLocalDiskCritical
15eqlNASControllerRaidControllerCritical
16eqlNASControllerMemoryCritical
17eqlNASControllerVirtualDiskCritical
 .1.3.6.1.4.1.12740.17.1.12.1.3
eqlApplianceServiceWarningConditions
This field indicates the current warning conditions associated with the appliance
Bits
Enumerated Values:
0exaStoreServiceFSCheckerFailed
1exaStoreServicejournal
2exaStoreServersSomeDown
3exaStoreServersSomeDetached
4exaStoreServersNotOptimal
5exaStoreStorageSubsysNotOptimal
6eqlNASChassisClientNetworkNotOptimal
7eqlNASChassisBackplaneNetworkNotOptimal
8eqlNASChassisInternalNetworkNotOptimal
9eqlNASChassisSanNetworkNotOptimal
10eqlNASChassisFanNotOptimal
11eqlNASChassisPowerSupplyPartial
12eqlNASControllerAmbientTempNotOptimal
13eqlNASControllerBPSNotOptimal
14eqlNASControllerCPUNotOptimal
15eqlNASControllerFanNotOptimal
16eqlNASControllerLocalDiskNotOptimal
17eqlNASControllerRaidControllerNotOptimal
18eqlNASControllerMemoryNotOptimal
19eqlNASControllerVirtualDiskNotOptimal
20eqlNASControllerPowerSupplyPartial
 .1.3.6.1.4.1.12740.17.1.12.1.4
eqlApplianceServiceAction
This field indicates the type of load balancing being requested
Enumerationr/w
Enumerated Values:
1massFailback
2massRebalance
 .1.3.6.1.4.1.12740.17.1.12.1.5

eqlApplianceStatsTable

table
.1.3.6.1.4.1.12740.17.1.13 · 1 row entry · 10 columns
Open in standard view
Uses the equallogic variant from /opt/observium/mibs/equallogic.
Command help
Walk eqlApplianceStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLAPPLIANCE-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLAPPLIANCE-MIB::eqlApplianceStatsTable' 
EqualLogic-Dynamic Appliance operations failures table
This table is used to retrieve failure information related to an appliance.
TimeoutAll:60
eqlApplianceStatsEntry row .1.3.6.1.4.1.12740.17.1.13.1
An entry (row) containing an operation.
Indexes
Column Syntax OID
eqlApplianceStatsTotalCapacity
This field represents the total capacity in MB. This is the space reserved for NAS i.e. the size of the NAS pool minus the size reserved by system for metadata.
This represents the eqlNASAppliancePoolSize - MetaData si…
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.12740.17.1.13.1.1
eqlApplianceStatsTotalAllocated
This field is used indicate the total allocated space in mega bytes. This is the sum of the virtual volume (container) sizes.
If there are 2 containers: container1 which is 10MB and container2 which is 30MB. The value …
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.12740.17.1.13.1.2
eqlApplianceStatsTotalUsed
This field is used indicate the total mega bytes in use. It represents the total space used by all the containers and snapshots.
If we are using 2MB of container1, 10MB of container2 and 1MB of the container2 space is u…
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.12740.17.1.13.1.3
eqlApplianceStatsTotalFree
This field is used indicate the total mega bytes free. This field is the difference between the allocated space and used space i.e. TotalAllocatedSpace-TotalUsedSpace.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.12740.17.1.13.1.4
eqlApplianceStatsTotalSnapshots
This field is used indicate the total mega bytes used by snapshots. This field represents the space used only by snapshots for all the containers in the NAS pool.
If 1MB of container1 and 2MB of container2 is used by sn…
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.12740.17.1.13.1.5
eqlApplianceStatsNumberOfContainers
This field is used indicate the number containers.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.12740.17.1.13.1.6
eqlApplianceStatsNumberOfNfsExports
This field is used indicate the number of Nfs exports on the appliance.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.12740.17.1.13.1.7
eqlApplianceStatsNumberOfCifsShares
This field is used indicate the number of Cifs exports on the appliance.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.12740.17.1.13.1.8
eqlApplianceStatsNumberOfSnapshots
This field is used indicate the number Snapshots for the appliance.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.12740.17.1.13.1.9
eqlApplianceStatsTotalOptimizationSpaceSavings
This field is used indicate the total mega bytes saved across all file systems due to optimization.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.12740.17.1.13.1.10

eqlApplianceNodeStatusTable

table
.1.3.6.1.4.1.12740.17.1.14 · 1 row entry · 1 columns
Open in standard view
Uses the equallogic variant from /opt/observium/mibs/equallogic.
Command help
Walk eqlApplianceNodeStatusTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLAPPLIANCE-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLAPPLIANCE-MIB::eqlApplianceNodeStatusTable' 
EqualLogic-Dynamic Appliance operations failures table
This table is used to retrieve failure information related to an appliance.
TimeoutAll:60
eqlApplianceNodeStatusEntry row .1.3.6.1.4.1.12740.17.1.14.1
An entry (row) containing an operation.
Indexes
Column Syntax OID
eqlApplianceNodeStatusNodeState
This field represents the state of the node indexed by eqlApplianceNodeIndex
Enumeration
Enumerated Values:
0unknown
1on
2off
3detached
 .1.3.6.1.4.1.12740.17.1.14.1.1

eqlApplianceMultiStateOpsTable

table
.1.3.6.1.4.1.12740.17.1.15 · 1 row entry · 14 columns
Open in standard view
Uses the equallogic variant from /opt/observium/mibs/equallogic.
Command help
Walk eqlApplianceMultiStateOpsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLAPPLIANCE-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLAPPLIANCE-MIB::eqlApplianceMultiStateOpsTable' 
EqualLogic-Persistent Appliance Multi-state Operations table.
This table is used to maintain state information for a multi-state operation for an appliance.
TimeoutAll:60
eqlApplianceMultiStateOpsEntry row .1.3.6.1.4.1.12740.17.1.15.1
An entry (row) containing state information for a mult-state operation for an appliance.
Indexes
Column Syntax OID
eqlApplianceMultiStateOpsIndex
This field specifies a unique index for identifing a multi-state operation.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.12740.17.1.15.1.1
eqlApplianceMultiStateOpsRowStatus
This field is used to manage operations.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.12740.17.1.15.1.2
eqlApplianceMultiStateOpsType
This field specifies the type of multi-state operation.
Enumeration
Enumerated Values:
0unknown
1attach-node
2add-pair
3resize
4detach
5start
6stop
7delete
8long-running-blocking-config
9diagnostics
10nas-cluster-update
11restore
12service-mode-change
13container-cfg-modify
 .1.3.6.1.4.1.12740.17.1.15.1.3
eqlApplianceMultiStateOpsStatus
This field represents the current status of this operation. In case of errors, this value will represent the error number.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.12740.17.1.15.1.4
eqlApplianceMultiStateOpsServiceTag
This field indicates the service tag of the attaching node, or the first of the nodes being added
OctetStringr/w
Constraints:
range: 1-32
 .1.3.6.1.4.1.12740.17.1.15.1.5
eqlApplianceMultiStateOpsServiceTag2
This field indicates the service tag of the second of the nodes being added
OctetStringr/w
Constraints:
range: 1-32
 .1.3.6.1.4.1.12740.17.1.15.1.6
eqlApplianceMultiStateOpsNodeIndex
This field represents the index of a node pertaining to this operation.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.12740.17.1.15.1.7
eqlApplianceMultiStateOpsNodeIndex2
This field represents the index of a second node pertaining to this operation.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.12740.17.1.15.1.8
eqlApplianceMultiStateOpsState
This field represents the state during the attach state machine.
Enumerationr/w
Enumerated Values:
0unknown
1001attach-node-setup
1002attach-internal-network
1003attach-san-network
1004attach-client-network
1005attach-configure-gateway
1006attach-start-nodes-validation
1007attach-nodes-validation-inprogress
1008attach-action
1009attach-action-inprogress
1010attach-completed
1101resize-expand
1102resize-expand-inprogress
1103resize-format
1104resize-format-inprogress
1105resize-completed
1106resize-nas-volumes
1107resize-discover-volumes
1201detach-inprogress
1301start-inprogress
1401stop-inprogress
1501add-pair-node-setup
1502add-pair-node-count
1503add-pair-cluster-internal-network
1504add-pair-reset-node-count
1505add-pair-nodes-internal-network
1506add-pair-cluster-san-network
1507add-pair-nodes-san-network
1508add-pair-cluster-client-network
1509add-pair-nodes-client-network
1510add-pair-configure-gateway
1511add-pair-start-nodes-validation
1512add-pair-nodes-validation-inprogress
1513add-pair-prepare
1514add-pair-create-volume-acls
1515add-pair-start-attach
1516add-pair-attach-inprogress
1517add-pair-start-action
1518add-pair-action-inprogress
1519add-pair-completed
1520add-pair-start-nas-appliance-add
1521add-pair-nas-appliance-add-inprogress
1522add-pair-start-volume-discovery
1523add-pair-start-nas-appliance-join
1524add-pair-nas-appliance-join-inprogress
1601delete-inprogress
1602local-delete-inprogress
1701modify-internal-network
1702modify-san-network
1703modify-client-network
1704configure-credential-no-external
1705configure-credential-ldap
1706configure-credential-nis
1707configure-credential-unknown
1708configure-active-directory
1709max-keep-set
1710grp-inet-addr-set
1711delete-container-host-access
1712rename-cluster
1713cifs-operation
1714nas-cluster-update-start
1801nas-diags-init
1802nas-diags-start-general
1803nas-diags-check-general-started
1804nas-diags-check-general-finished
1805nas-diags-start-file
1806nas-diags-check-file-started
1807nas-diags-check-file-finished
1808nas-diags-finalize
1809nas-diags-done
1901nas-cluster-update-inprogress
2001restore-start
2002restore-service-mode-to-maintenance
2003restore-transitioning-to-maintenance
2004restore-internal-network
2005restore-cluster-name
2006restore-start-nas-appliance-create
2007restore-nas-appliance-create-in-progress
2008restore-san-network
2009restore-send-eql-group-ip
2010restore-create-volume-acls
2011restore-start-volume-discovery
2012restore-start-format
2013restore-format-in-progress
2014restore-start-config-restore
2015restore-config-restore-in-progress
2016restore-done
2101service-mode-change-inprogress
2200container-cfg-modify-inprogress
 .1.3.6.1.4.1.12740.17.1.15.1.9
eqlApplianceMultiStateOpsPercentage
This field represents the % of completion for this operation.
Unsigned32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.12740.17.1.15.1.10
eqlApplianceMultiStateOpsAction
This field is used to either retry or continue the currently active operation.
Enumerationr/w
Enumerated Values:
0none
1retry
2continue
3delete
4start
 .1.3.6.1.4.1.12740.17.1.15.1.11
eqlApplianceMultiStateOpsCurNodeIndex
This field represents the index of a node that is being operated on for this operation. 0 means VIP.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.12740.17.1.15.1.12
eqlApplianceMultiStateOpsLongRunningOp
True if a long running nas operation is in progress.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.12740.17.1.15.1.13
eqlApplianceMultiStateOpsRequestId
This field represents the the operation request identifier.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.12740.17.1.15.1.14

eqlApplianceNdmpTable

table
.1.3.6.1.4.1.12740.17.1.16 · 1 row entry · 5 columns
Open in standard view
Uses the equallogic variant from /opt/observium/mibs/equallogic.
Command help
Walk eqlApplianceNdmpTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLAPPLIANCE-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLAPPLIANCE-MIB::eqlApplianceNdmpTable' 
EqualLogic-Dynamic Appliance Ndmp Table.
TimeoutAll:60
eqlApplianceNdmpEntry row .1.3.6.1.4.1.12740.17.1.16.1
An entry (row) containing ndmp information.
Indexes
Column Syntax OID
eqlApplianceNdmpRowStatus
Rowstatus
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.12740.17.1.16.1.1
eqlApplianceNdmpUserName
User name to allow DMA Servers to connect to NDMPD.
This name must be used for user authentication by NDMPD.
OctetStringr/w
Constraints:
range: 1-128
 .1.3.6.1.4.1.12740.17.1.16.1.2
eqlApplianceNdmpPasswd
An octet string containing the password to authenticate
DMA servers connecting to NDMPD.
If written, it changes the password for
the account. If read, it returns a zero-length string.
OctetStringr/w
Constraints:
range: 1-32
 .1.3.6.1.4.1.12740.17.1.16.1.3
eqlApplianceNdmpDesiredState
This field is used to either stop or start NDMP.
Enumerationr/w
Enumerated Values:
0stop
1start
 .1.3.6.1.4.1.12740.17.1.16.1.4
eqlApplianceNdmpClientPort
The listening port number of the Ndmp. Ndmp will listen on this port on all available client IP addresses.
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.12740.17.1.16.1.5

eqlApplianceNdmpDmaServerTable

table
.1.3.6.1.4.1.12740.17.1.17 · 1 row entry · 4 columns
Open in standard view
Uses the equallogic variant from /opt/observium/mibs/equallogic.
Command help
Walk eqlApplianceNdmpDmaServerTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLAPPLIANCE-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLAPPLIANCE-MIB::eqlApplianceNdmpDmaServerTable' 
EqualLogic-Dynamic Appliance NDMP DMA Server Table.
TimeoutAll:60
eqlApplianceNdmpDmaServerEntry row .1.3.6.1.4.1.12740.17.1.17.1
An entry (row) containing group ndmp dma server information.
Indexes
Column Syntax OID
eqlApplianceNdmpDmaServerRowStatus
row status
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.12740.17.1.17.1.1
eqlApplianceNdmpDmaServerIPAddressType
This field contains the IP Address, in network byte order for the NTP server.
INET-ADDRESS-MIBInetAddressTyper/w
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.12740.17.1.17.1.2
eqlApplianceNdmpDmaServerIPAddress
This field contains the IP Address, in network byte order for the NTP server.
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.12740.17.1.17.1.3
eqlApplianceNdmpDmaServerTransactionState
This field denotes the transaction state of the operations on the eqlApplianceNdmpDmaServerTable.
Enumerationr/w
Enumerated Values:
0configNone
1configStart
2configInProgress
3configCommit
4configStartCommit
 .1.3.6.1.4.1.12740.17.1.17.1.4

eqlApplianceLocalUserAccessTable

table
.1.3.6.1.4.1.12740.17.1.18 · 1 row entry · 10 columns
Open in standard view
Uses the equallogic variant from /opt/observium/mibs/equallogic.
Command help
Walk eqlApplianceLocalUserAccessTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLAPPLIANCE-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLAPPLIANCE-MIB::eqlApplianceLocalUserAccessTable' 
EqualLogic-Dynamic Appliance User access table
This table is used to manage user accounts on the Appliance.
TimeoutAll:60
eqlApplianceLocalUserAccessEntry row .1.3.6.1.4.1.12740.17.1.18.1
An entry (row) containing an operation.
Indexes
Column Syntax OID
eqlApplianceLocalUserAccessRowStatus
This field is used to manage operations.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.12740.17.1.18.1.1
eqlApplianceLocalUserName
The users name
OctetStringr/w
Constraints:
range: 1-64
 .1.3.6.1.4.1.12740.17.1.18.1.2
eqlApplianceLocalUserPassword
The user password
OctetStringr/w
Constraints:
range: 1-240
 .1.3.6.1.4.1.12740.17.1.18.1.3
eqlApplianceLocalUserUid
The numeric Unix user ID of the user referenced by this row
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.12740.17.1.18.1.4
eqlApplianceLocalUserPrimaryGroup
The name of the group that sets the group quota for this user
OctetStringr/w
Constraints:
range: 1-129
 .1.3.6.1.4.1.12740.17.1.18.1.5
eqlApplianceLocalUserRealName
The real name associated with this user
OctetStringr/w
Constraints:
range: 1-128
 .1.3.6.1.4.1.12740.17.1.18.1.6
eqlApplianceLocalUserSiddeprecated
The SID of this user presented as a hyphen separated alpha numeric string
OctetStringr/w
Constraints:
range: 1-64
 .1.3.6.1.4.1.12740.17.1.18.1.7
eqlApplianceLocalUserRemarks
The administrator remarks associated with this user
OctetStringr/w
Constraints:
range: 1-64
 .1.3.6.1.4.1.12740.17.1.18.1.8
eqlApplianceLocalUserAdditionalGroups
A comma separated list of the group names used to determine access permissions for this user
OctetStringr/w
Constraints:
range: 1-1023
 .1.3.6.1.4.1.12740.17.1.18.1.9
eqlApplianceLocalUserAccess
This field specifies whether or not access is enabled for the local user in this appliance.
The default is enabled.
Enumerationr/w
Enumerated Values:
0enabled
1disabled
 .1.3.6.1.4.1.12740.17.1.18.1.10

eqlApplianceLocalGroupAccessTable

table
.1.3.6.1.4.1.12740.17.1.19 · 1 row entry · 4 columns
Open in standard view
Uses the equallogic variant from /opt/observium/mibs/equallogic.
Command help
Walk eqlApplianceLocalGroupAccessTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLAPPLIANCE-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLAPPLIANCE-MIB::eqlApplianceLocalGroupAccessTable' 
EqualLogic-Dynamic Appliance local group access table
This table is used to manage local group accounts on the Appliance.
TimeoutAll:60
eqlApplianceLocalGroupAccessEntry row .1.3.6.1.4.1.12740.17.1.19.1
An entry (row) containing an operation.
Indexes
Column Syntax OID
eqlApplianceLocalGroupAccessRowStatus
This field is used to manage operations.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.12740.17.1.19.1.1
eqlApplianceLocalGroupName
The name of the group referenced by this row
OctetStringr/w
Constraints:
range: 1-64
 .1.3.6.1.4.1.12740.17.1.19.1.2
eqlApplianceLocalGroupGid
The numeric Unix group ID of the group referenced by this row
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.12740.17.1.19.1.3
eqlApplianceLocalGroupGsid
The GSID of this group presented as a hyphen separated alpha numeric string
OctetStringr/w
Constraints:
range: 1-64
 .1.3.6.1.4.1.12740.17.1.19.1.4

eqlApplianceCredentialsDatabaseTable

table
.1.3.6.1.4.1.12740.17.1.20 · 1 row entry · 6 columns
Open in standard view
Uses the equallogic variant from /opt/observium/mibs/equallogic.
Command help
Walk eqlApplianceCredentialsDatabaseTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLAPPLIANCE-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLAPPLIANCE-MIB::eqlApplianceCredentialsDatabaseTable' 
EqualLogic-Dynamic Appliance credentials access table
This table is used to manage the credential databases on the Appliance.
TimeoutAll:60
eqlApplianceCredentialsDatabaseEntry row .1.3.6.1.4.1.12740.17.1.20.1
An entry (row) containing an operation
Indexes
Column Syntax OID
eqlApplianceCredentialsDatabaseRowStatus
This field is used to manage operations.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.12740.17.1.20.1.1
eqlApplianceCredentialsDatabaseType
This field represents the type of user data base on the apppliance
Enumerationr/w
Enumerated Values:
0noexternal
1ldap
2nis
3unknown
 .1.3.6.1.4.1.12740.17.1.20.1.2
eqlApplianceCredentialsDatabaseLdapBaseDn
 OctetStringr/w
Constraints:
range: 1-255
 .1.3.6.1.4.1.12740.17.1.20.1.3
eqlApplianceCredentialsDatabaseLdapServerAddress
The IP address as a string
OctetStringr/w
Constraints:
range: 1-64
 .1.3.6.1.4.1.12740.17.1.20.1.4
eqlApplianceCredentialsDatabaseNisDomain
The NIS Domain
OctetStringr/w
Constraints:
range: 1-64
 .1.3.6.1.4.1.12740.17.1.20.1.5
eqlApplianceCredentialsDatabaseNisServerAddress
A comma separated list of NIS server IP addresses
OctetStringr/w
Constraints:
range: 1-512
 .1.3.6.1.4.1.12740.17.1.20.1.6

eqlApplianceActiveDirectoryAccessTable

table
.1.3.6.1.4.1.12740.17.1.21 · 1 row entry · 15 columns
Open in standard view
Uses the equallogic variant from /opt/observium/mibs/equallogic.
Command help
Walk eqlApplianceActiveDirectoryAccessTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLAPPLIANCE-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLAPPLIANCE-MIB::eqlApplianceActiveDirectoryAccessTable' 
EqualLogic-Dynamic Appliance User access table
This table is used to manage access to Active Directory by the Appliance.
TimeoutAll:60
eqlApplianceActiveDirectoryAccessEntry row .1.3.6.1.4.1.12740.17.1.21.1
An entry (row) containing an operation
Indexes
Column Syntax OID
eqlApplianceActiveDirectoryRowStatus
This field is used to manage operations.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.12740.17.1.21.1.1
eqlApplianceActiveDirectoryAdvancedSettings
Yes/No; Allows for advanced configuration by support personel; Leave as No
Enumerationr/w
Enumerated Values:
0unused
1no
2yes
 .1.3.6.1.4.1.12740.17.1.21.1.2
eqlApplianceActiveDirectoryNetBiosName
This is the NetBIOS name that will appear in network neighborhood
OctetStringr/w
Constraints:
range: 1-64
 .1.3.6.1.4.1.12740.17.1.21.1.3
eqlApplianceActiveDirectoryDomain
The Active Directory full qualified domain name the appliance belongs to
OctetStringr/w
Constraints:
range: 1-64
 .1.3.6.1.4.1.12740.17.1.21.1.4
eqlApplianceActiveDirectoryUserName
A username with permissions to join the AD
OctetStringr/w
Constraints:
range: 1-64
 .1.3.6.1.4.1.12740.17.1.21.1.5
eqlApplianceActiveDirectoryPassword
Password for user who can join the AD
OctetStringr/w
Constraints:
range: 1-64
 .1.3.6.1.4.1.12740.17.1.21.1.6
eqlApplianceActiveDirectoryDescription
Description field
OctetStringr/w
Constraints:
range: 1-1023
 .1.3.6.1.4.1.12740.17.1.21.1.7
eqlApplianceActiveDirectoryFunctionalLevel
Mode of the AD server either Native or Mixed
OctetStringr/w
Constraints:
range: 1-7
 .1.3.6.1.4.1.12740.17.1.21.1.8
eqlApplianceActiveDirectoryWinsServer
IP addr of WINS server if netowrk has one
OctetStringr/w
Constraints:
range: 1-64
 .1.3.6.1.4.1.12740.17.1.21.1.9
eqlApplianceActiveDirectoryWorkGroup
Name of the workgroup to join
OctetStringr/w
Constraints:
range: 1-64
 .1.3.6.1.4.1.12740.17.1.21.1.10
eqlApplianceActiveDirectoryDomainControllers
Commma separated list of ipv4 addresses
OctetStringr/w
Constraints:
range: 1-128
 .1.3.6.1.4.1.12740.17.1.21.1.11
eqlApplianceActiveDirectoryMemberOfDomain
Truth value if it's member of domain
OctetStringr/w
Constraints:
range: 1-10
 .1.3.6.1.4.1.12740.17.1.21.1.12
eqlApplianceActiveDirectoryStatus
Indicates if the Appliance is able to access the Active Directory domain.
Enumerationr/w
Enumerated Values:
0unused
1enabled
2disabled
 .1.3.6.1.4.1.12740.17.1.21.1.13
eqlApplianceActiveDirectoryAccessibleControllers
Commma separated list of controllers that are accessible.
OctetStringr/w
Constraints:
range: 1-128
 .1.3.6.1.4.1.12740.17.1.21.1.14
eqlApplianceActiveDirectoryPreferredControllers
Comman separated list of preferred Active Directory controllers.
OctetStringr/w
Constraints:
range: 1-128
 .1.3.6.1.4.1.12740.17.1.21.1.15

eqlApplianceManualMappingTable

table
.1.3.6.1.4.1.12740.17.1.22 · 1 row entry · 4 columns
Open in standard view
Uses the equallogic variant from /opt/observium/mibs/equallogic.
Command help
Walk eqlApplianceManualMappingTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLAPPLIANCE-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLAPPLIANCE-MIB::eqlApplianceManualMappingTable' 
EqualLogic-Dynamic Appliance User access table
This table is used to manage manualmapping of user access to the  Appliance.
TimeoutAll:60
eqlApplianceManualMappingEntry row .1.3.6.1.4.1.12740.17.1.22.1
An entry (row) containing an operation
Indexes
Column Syntax OID
eqlApplianceManualMappingRowStatus
This field is used to manage operations.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.12740.17.1.22.1.1
eqlApplianceManualMappingUserName
The username to be mapped. The increased size is required should an AD name be used
OctetStringr/w
Constraints:
range: 1-129
 .1.3.6.1.4.1.12740.17.1.22.1.2
eqlApplianceManualMappingMappedToUserName
The username to which the name in eqlApplianceManualMappingUserName is to be mapped. The increased size is required should an AD name be used
OctetStringr/w
Constraints:
range: 1-129
 .1.3.6.1.4.1.12740.17.1.22.1.3
eqlApplianceManualMappingDirection
The direction of the mapping either none or windows to unix or unix to windows
Enumerationr/w
Enumerated Values:
0unused
1none
2unixtowindows
3windowstounix
 .1.3.6.1.4.1.12740.17.1.22.1.4

eqlApplianceMappingPolicyTable

table
.1.3.6.1.4.1.12740.17.1.23 · 1 row entry · 3 columns
Open in standard view
Uses the equallogic variant from /opt/observium/mibs/equallogic.
Command help
Walk eqlApplianceMappingPolicyTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLAPPLIANCE-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLAPPLIANCE-MIB::eqlApplianceMappingPolicyTable' 
EqualLogic-Dynamic Appliance User access table
This table is used to manage manualmapping of user access to the  Appliance.
TimeoutAll:60
eqlApplianceMappingPolicyEntry row .1.3.6.1.4.1.12740.17.1.23.1
An entry (row) containing an operation
Indexes
Column Syntax OID
eqlApplianceMappingPolicyRowStatus
This field is used to manage operations.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.12740.17.1.23.1.1
eqlApplianceMappingPolicyAcquireMapping
Indicated if mapping policy is enabled
Enumerationr/w
Enumerated Values:
0unused
1enable
2disable
 .1.3.6.1.4.1.12740.17.1.23.1.2
eqlApplianceMappingPolicyAllowNotMappeddeprecated
Indicates if guest mapping is allowed for unmapped users. The value is always enabled.
Enumerationr/w
Enumerated Values:
0unused
1enable
2disable
 .1.3.6.1.4.1.12740.17.1.23.1.3

eqlApplianceAllGroupsTable

table
.1.3.6.1.4.1.12740.17.1.24 · 1 row entry · 5 columns
Open in standard view
Uses the equallogic variant from /opt/observium/mibs/equallogic.
Command help
Walk eqlApplianceAllGroupsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLAPPLIANCE-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLAPPLIANCE-MIB::eqlApplianceAllGroupsTable' 
EqualLogic-Dynamic Appliance User access table
This table is used to manage non-local group accounts on the Appliance.
TimeoutAll:60
eqlApplianceAllGroupsEntry row .1.3.6.1.4.1.12740.17.1.24.1
An entry (row) containing an operation.
Indexes
Column Syntax OID
eqlApplianceAllGroupsRowStatus
This field is used to manage operations.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.12740.17.1.24.1.1
eqlApplianceAllGroupsName
The name of the group referenced by this row. The length is to support the maximum length of an AD groupname including the domain
OctetStringr/w
Constraints:
range: 1-129
 .1.3.6.1.4.1.12740.17.1.24.1.2
eqlApplianceAllGroupsId
The id of the group referenced by this row
OctetStringr/w
Constraints:
range: 1-64
 .1.3.6.1.4.1.12740.17.1.24.1.3
eqlApplianceAllGroupsType
The type of the group referenced by this row
Enumerationr/w
Enumerated Values:
0unused
1ad
2unix
 .1.3.6.1.4.1.12740.17.1.24.1.4
eqlApplianceAllGroupsSource
The credential source of the group referenced by this row
Enumerationr/w
Enumerated Values:
0unused
1local
2external
 .1.3.6.1.4.1.12740.17.1.24.1.5

eqlApplianceAllUsersTable

table
.1.3.6.1.4.1.12740.17.1.25 · 1 row entry · 5 columns
Open in standard view
Uses the equallogic variant from /opt/observium/mibs/equallogic.
Command help
Walk eqlApplianceAllUsersTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLAPPLIANCE-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLAPPLIANCE-MIB::eqlApplianceAllUsersTable' 
EqualLogic-Dynamic Appliance User access table
This table is used to manage non-local user accounts on the Appliance.
TimeoutAll:60
eqlApplianceAllUsersEntry row .1.3.6.1.4.1.12740.17.1.25.1
An entry (row) containing an operation.
Indexes
Column Syntax OID
eqlApplianceAllUsersRowStatus
This field is used to manage operations.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.12740.17.1.25.1.1
eqlApplianceAllUsersName
The name of the user referenced by this row
OctetStringr/w
Constraints:
range: 1-129
 .1.3.6.1.4.1.12740.17.1.25.1.2
eqlApplianceAllUsersId
The id of the user referenced by this row
OctetStringr/w
Constraints:
range: 1-64
 .1.3.6.1.4.1.12740.17.1.25.1.3
eqlApplianceAllUsersType
The type of the user referenced by this row
Enumerationr/w
Enumerated Values:
0unused
1ad
2unix
 .1.3.6.1.4.1.12740.17.1.25.1.4
eqlApplianceAllUsersSource
The credential source of the user referenced by this row
Enumerationr/w
Enumerated Values:
0unused
1local
2external
 .1.3.6.1.4.1.12740.17.1.25.1.5

eqlApplianceEQLMemberMPVTable

table deprecated
.1.3.6.1.4.1.12740.17.1.26 · 1 row entry · 1 columns
Open in standard view
Uses the equallogic variant from /opt/observium/mibs/equallogic.
Command help
Walk eqlApplianceEQLMemberMPVTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLAPPLIANCE-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLAPPLIANCE-MIB::eqlApplianceEQLMemberMPVTable' 
EqualLogic-Persistent table used to obtain the Management Protocol Version
(MPV) of each EQL Member in the Group. This table is deprecated now.
A new table eqlApplianceTypeEQLMemberMPVTable based on groupId, memberIndex
and ApplianceType will be instead.
TimeoutAll:60
eqlApplianceEQLMemberMPVEntry row .1.3.6.1.4.1.12740.17.1.26.1
An entry contains the Management Protocol Version (MPV) of the Member.
Indexes
Column Syntax OID
eqlApplianceEQLMemberMPVdeprecated
The Management Protocol Version (MPV)of this EQL member.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.12740.17.1.26.1.1

eqlApplianceMPVTable

table
.1.3.6.1.4.1.12740.17.1.27 · 1 row entry · 5 columns
Open in standard view
Uses the equallogic variant from /opt/observium/mibs/equallogic.
Command help
Walk eqlApplianceMPVTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLAPPLIANCE-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLAPPLIANCE-MIB::eqlApplianceMPVTable' 
EqualLogic-Dynamic table holding the EQL Group MPV and the Appliance Cluster MPV.
TimeoutAll:60
eqlApplianceMPVEntry row .1.3.6.1.4.1.12740.17.1.27.1
An entry contains the Management Protocol Version (MPV) of the EQL Group and of the Appliance Cluster.
Indexes
Column Syntax OID
eqlApplianceEQLGroupMPV
The Management Protocol Version (MPV) of the EQL Group.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.12740.17.1.27.1.1
eqlApplianceClusterMPV
The Management Protocol Version (MPV) of the Appliance Cluster.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.12740.17.1.27.1.2
eqlApplianceClusterMajorVersion
The Major firmware version of the Appliance Cluster.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.12740.17.1.27.1.3
eqlApplianceClusterMinorVersion
The Minor firmware version of the Appliance Cluster.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.12740.17.1.27.1.4
eqlApplianceClusterMaintVersion
The Maintenance firmware version of the Appliance Cluster.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.12740.17.1.27.1.5

eqlApplianceSyncedDataTable

table
.1.3.6.1.4.1.12740.17.1.28 · 1 row entry · 6 columns
Open in standard view
Uses the equallogic variant from /opt/observium/mibs/equallogic.
Command help
Walk eqlApplianceSyncedDataTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLAPPLIANCE-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLAPPLIANCE-MIB::eqlApplianceSyncedDataTable' 
EqualLogic-Persistent Appliance Unsynced data table
This table is used to maintain a list of unsynced data between EQL and the appliance.
TimeoutAll:60
eqlApplianceSyncedDataEntry row .1.3.6.1.4.1.12740.17.1.28.1
An entry (row) containing Synced data.
Indexes
Column Syntax OID
eqlApplianceSyncedDataRowStatus
This field is used to manage operations.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.12740.17.1.28.1.1
eqlApplianceSyncedDataType
This field represents the type of the data to be synced to the appliance
Enumeration
Enumerated Values:
1grpadminpswd
2grpip
3timezone
4traprecipient
5trapcommunity
6cluster-san-vip
 .1.3.6.1.4.1.12740.17.1.28.1.2
eqlApplianceSyncedDataIndex
This field specifies a unique index for identifing the SyncedData.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.12740.17.1.28.1.3
eqlApplianceSyncedDataIndexPayload
This field represents the payload form of the object index that needs to be synced to the appliance
OctetString
Constraints:
range: 1-1500
 .1.3.6.1.4.1.12740.17.1.28.1.4
eqlApplianceSyncedDataEntryPayload
This field represents the payload form of the object entry that needs to be synced to the appliance
OctetString
Constraints:
range: 1-1500
 .1.3.6.1.4.1.12740.17.1.28.1.5
eqlApplianceSyncedDataState
This field represents the state of the data to be synced to the appliance
Enumeration
Enumerated Values:
0sync-pending
1sync-initiated
2synced
 .1.3.6.1.4.1.12740.17.1.28.1.6

eqlApplianceCIFSProtocolTable

table
.1.3.6.1.4.1.12740.17.1.29 · 1 row entry · 7 columns
Open in standard view
Uses the equallogic variant from /opt/observium/mibs/equallogic.
Command help
Walk eqlApplianceCIFSProtocolTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLAPPLIANCE-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLAPPLIANCE-MIB::eqlApplianceCIFSProtocolTable' 
Equallogic-Dynamic NAS CIFS Table.
This table contains a list of CIFS protocol entry.
eqlApplianceCIFSProtocolEntry row .1.3.6.1.4.1.12740.17.1.29.1
An entry (row) containing CIFS protocal configuration.
Indexes
Column Syntax OID
eqlApplianceCIFSProtocolRowStatus
This field is used to manage operations.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.12740.17.1.29.1.1
eqlApplianceCIFSProtocolAuthenticationEnabled
If true authentication is enabled on this appliance
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.12740.17.1.29.1.2
eqlApplianceCIFSProtocolAuthenticationType
Indicates the type of authentication in effect on the appliance - guestsonly is deprecated
Enumerationr/w
Enumerated Values:
0unused
1activedirectory
2localuser
3guestsonly
 .1.3.6.1.4.1.12740.17.1.29.1.3
eqlApplianceCIFSProtocolAllowGuestsdeprecated
This is a deprecated field which is still requred in the exastore xml
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.12740.17.1.29.1.4
eqlApplianceCIFSProtocolMaxConnections
This field specifies the maxium CIFS connection per node for this appliance
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.12740.17.1.29.1.5
eqlApplianceCIFSProtocolUnixCharacterSet
Indicates the Unix character sets supported by CIFS on the appliance
Enumerationr/w
Enumerated Values:
0unused
1utf8
2utf8jp
 .1.3.6.1.4.1.12740.17.1.29.1.6
eqlApplianceCIFSProtocolDosCodePage
Indicates the DOS code page supported by CIFS on the appliance
Enumerationr/w
Enumerated Values:
0unused
1cp850
2cp437
3cp737
4cp775
5cp852
6cp857
7cp860
8cp861
9cp862
10cp863
11cp864
12cp865
13cp866
14cp874
15cp932
16cp936
17cp949
18cp950
19eucjp
 .1.3.6.1.4.1.12740.17.1.29.1.7

eqlApplianceOptimizationScheduleTable

table
.1.3.6.1.4.1.12740.17.1.30 · 1 row entry · 4 columns
Open in standard view
Uses the equallogic variant from /opt/observium/mibs/equallogic.
Command help
Walk eqlApplianceOptimizationScheduleTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLAPPLIANCE-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLAPPLIANCE-MIB::eqlApplianceOptimizationScheduleTable' 
EqualLogic-Dynamic Appliance Optimization Scheduler Table.
TimeoutAll:60
eqlApplianceOptimizationScheduleEntry row .1.3.6.1.4.1.12740.17.1.30.1
An entry (row) containing ndmp information.
Indexes
Column Syntax OID
eqlApplianceOptimizationScheduleRowStatus
Rowstatus
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.12740.17.1.30.1.1
eqlApplianceOptimizationScheduleStatus
If true optimization schedule is enabled on this appliance
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.12740.17.1.30.1.2
eqlApplianceOptimizationContainerIndex
Unique Identifier used to manage NAS Containers. 0 in this case.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.12740.17.1.30.1.3
eqlApplianceOptimizationPolicyIndex
This value identifies the snapshot policy for this snapshot.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.12740.17.1.30.1.4

eqlApplianceAdminAccountTable

table
.1.3.6.1.4.1.12740.17.1.31 · 1 row entry · 3 columns
Open in standard view
Uses the equallogic variant from /opt/observium/mibs/equallogic.
Command help
Walk eqlApplianceAdminAccountTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLAPPLIANCE-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLAPPLIANCE-MIB::eqlApplianceAdminAccountTable' 
EqualLogic-Dynamic Appliance Administration account table.
eqlApplianceAdminAccountEntry row .1.3.6.1.4.1.12740.17.1.31.1
An entry (row) containing administration account settings.
Indexes
Column Syntax OID
eqlApplianceAdminAccountName
The name of the administration account.
OctetStringr/w
Constraints:
range: 1-64
 .1.3.6.1.4.1.12740.17.1.31.1.1
eqlApplianceAdminAccountRowStatus
This value is used to manage the conceptual row.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.12740.17.1.31.1.2
eqlApplianceAdminAccountPassword
An octet string containing the (crypt cipher) password for this
account. If written, it changes the password for
the account. If read, it returns a zero-length string.
OctetStringr/w
Constraints:
range: 1-64
 .1.3.6.1.4.1.12740.17.1.31.1.3

eqlApplianceLicenseTable

table
.1.3.6.1.4.1.12740.17.1.32 · 1 row entry · 7 columns
Open in standard view
Uses the equallogic variant from /opt/observium/mibs/equallogic.
Command help
Walk eqlApplianceLicenseTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLAPPLIANCE-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLAPPLIANCE-MIB::eqlApplianceLicenseTable' 
EqualLogic-Dynamic Appliance License table.
eqlApplianceLicenseEntry row .1.3.6.1.4.1.12740.17.1.32.1
An entry (row) containing license settings.
Indexes
Column Syntax OID
eqlApplianceLicenseRowStatus
This value is used to manage the conceptual row.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.12740.17.1.32.1.1
eqlApplianceLicenseFeatureId
An enumeration defining the licensed feature.
Enumeration
Enumerated Values:
1basic-dedupe
2advanced-dedupe
 .1.3.6.1.4.1.12740.17.1.32.1.2
eqlApplianceLicenseEntitlementId
Entitlement id of the license.
OctetString
Constraints:
range: 1-80
 .1.3.6.1.4.1.12740.17.1.32.1.3
eqlApplianceLicenseState
License state.
Enumerationr/w
Enumerated Values:
0enabled
1disabled
2expired
 .1.3.6.1.4.1.12740.17.1.32.1.4
eqlApplianceLicenseExpiry
Expiration date of the license. This field specifies the expiration date for the license.
Time is represented as the time in seconds since 00:00:00 UTC, 1970-01-01. 0 for perpetual licenses.
If the license type is perp…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.12740.17.1.32.1.5
eqlApplianceLicenseUsed
Set to True if the license is in use
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.12740.17.1.32.1.6
eqlApplianceLicenseType
License type.
Enumeration
Enumerated Values:
0evaluation
1perpetual
 .1.3.6.1.4.1.12740.17.1.32.1.7

eqlApplianceLicenseFileTable

table
.1.3.6.1.4.1.12740.17.1.33 · 1 row entry · 2 columns
Open in standard view
Uses the equallogic variant from /opt/observium/mibs/equallogic.
Command help
Walk eqlApplianceLicenseFileTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLAPPLIANCE-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLAPPLIANCE-MIB::eqlApplianceLicenseFileTable' 
EqualLogic-Dynamic Appliance License File table.
eqlApplianceLicenseFileEntry row .1.3.6.1.4.1.12740.17.1.33.1
An entry (row) containing license settings.
Indexes
Column Syntax OID
eqlApplianceLicenseFileRowStatus
This value is used to manage the conceptual row.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.12740.17.1.33.1.1
eqlApplianceLicenseFileName
File name of the license.
OctetStringr/w
Constraints:
range: 1-256
 .1.3.6.1.4.1.12740.17.1.33.1.2

eqlApplianceTypeEQLMemberMPVTable

table
.1.3.6.1.4.1.12740.17.1.34 · 1 row entry · 1 columns
Open in standard view
Uses the equallogic variant from /opt/observium/mibs/equallogic.
Command help
Walk eqlApplianceTypeEQLMemberMPVTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLAPPLIANCE-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLAPPLIANCE-MIB::eqlApplianceTypeEQLMemberMPVTable' 
EqualLogic-Persistent table used to obtain the Management Protocol Version
(MPV) of each EQL Member in the Group for a particular appliance type.
TimeoutAll:60
eqlApplianceTypeEQLMemberMPVEntry row .1.3.6.1.4.1.12740.17.1.34.1
An entry contains the Management Protocol Version (MPV) of the Member.
Indexes
Column Syntax OID
eqlApplianceTypeEQLMemberMPV
The Management Protocol Version (MPV) of this EQL member.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.12740.17.1.34.1.1

eqlApplianceTypeEQLGroupMPVTable

table
.1.3.6.1.4.1.12740.17.1.35 · 1 row entry · 1 columns
Open in standard view
Uses the equallogic variant from /opt/observium/mibs/equallogic.
Command help
Walk eqlApplianceTypeEQLGroupMPVTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLAPPLIANCE-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLAPPLIANCE-MIB::eqlApplianceTypeEQLGroupMPVTable' 
EqualLogic-Dynamic table holding the EQL Group MPV for a give type of Appliance Cluster.
TimeoutAll:60
eqlApplianceTypeEQLGroupMPVEntry row .1.3.6.1.4.1.12740.17.1.35.1
An entry contains the Management Protocol Version (MPV) of the EQL Group for a given type of Appliance Cluster.
Indexes
Column Syntax OID
eqlApplianceTypeEQLGroupMPV
The Management Protocol Version (MPV) of the EQL Group.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.12740.17.1.35.1.1

eqlApplianceVolumeDiscoveryTable

table
.1.3.6.1.4.1.12740.17.1.36 · 1 row entry · 4 columns
Open in standard view
Uses the equallogic variant from /opt/observium/mibs/equallogic.
Command help
Walk eqlApplianceVolumeDiscoveryTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLAPPLIANCE-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLAPPLIANCE-MIB::eqlApplianceVolumeDiscoveryTable' 
EqualLogic-Dynamic Appliance volume discovery operation status table
This table is used to manage volume discovery operations on appliances. 
TimeoutAll:60
eqlApplianceVolumeDiscoveryEntry row .1.3.6.1.4.1.12740.17.1.36.1
An entry (row) containing volume discovery status.
Indexes
Column Syntax OID
eqlApplianceVolumeDiscoveryRowStatus
This field is used to manage volume discovery operation.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.12740.17.1.36.1.1
eqlApplianceVolumeDiscoveryVolumeNodeAccessibleStatus
This field specifies the Volume accessible status by the specified Appliance and Controller.
Enumeration
Enumerated Values:
0not-optimal
1optimal
2fault
 .1.3.6.1.4.1.12740.17.1.36.1.2
eqlApplianceVolumeDiscoveryVolumeStatus
This field specifies the volume status.
Enumeration
Enumerated Values:
0unknown
1expanding
2formatted
3expandable
4new
5formatting
 .1.3.6.1.4.1.12740.17.1.36.1.3
eqlApplianceVolumeDiscoveryVolumeLunNumber
This field specifies the volume LUN number.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.12740.17.1.36.1.4

eqlApplianceInitiatorsTable

table
.1.3.6.1.4.1.12740.17.1.37 · 1 row entry · 2 columns
Open in standard view
Uses the equallogic variant from /opt/observium/mibs/equallogic.
Command help
Walk eqlApplianceInitiatorsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLAPPLIANCE-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLAPPLIANCE-MIB::eqlApplianceInitiatorsTable' 
EqualLogic-Dynamic table holding the list of Initiators for a given NAS Cluster.
TimeoutAll:60
eqlApplianceInitiatorsEntry row .1.3.6.1.4.1.12740.17.1.37.1
An entry (row) containing the initiators information.
Indexes
Column Syntax OID
eqlApplianceInitiatorRowStatus
This field is used indicate the status of this entry.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.12740.17.1.37.1.1
eqlApplianceInitiatorName
The iSCSI initiator name for a particular NAS controller.
OctetStringr/w
Constraints:
range: 0-223
 .1.3.6.1.4.1.12740.17.1.37.1.2

eqlApplianceUserQueryTable

table
.1.3.6.1.4.1.12740.17.1.38 · 1 row entry · 12 columns
Open in standard view
Uses the equallogic variant from /opt/observium/mibs/equallogic.
Command help
Walk eqlApplianceUserQueryTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLAPPLIANCE-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLAPPLIANCE-MIB::eqlApplianceUserQueryTable' 
Equallogic-Dynamic Appliance User search Table.
This table provides the ability to search for a particular
user in any of the 3 DBs provided, LocalUser, AD User, NIS/LDAP User.
 TimeoutAll:60
eqlApplianceUserQueryEntry row .1.3.6.1.4.1.12740.17.1.38.1
An entry (row) containing the Appliance User search information.
Indexes
Column Syntax OID
eqlApplianceUserQuerySearchString
The search string used for the query.
OctetStringr/w
Constraints:
range: 1-129
 .1.3.6.1.4.1.12740.17.1.38.1.1
eqlApplianceUserQueryDBType
This field indicates on which database to perform the query.
Enumerationr/w
Enumerated Values:
0unused
1ad
2unix
3all
4local
 .1.3.6.1.4.1.12740.17.1.38.1.2
eqlApplianceUserQueryPageSize
This field indicates the page size for the query result.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.12740.17.1.38.1.3
eqlApplianceUserQueryPageNumber
This field indicates the page number for the query.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.12740.17.1.38.1.4
eqlApplianceUserQueryUserDomain
The domain name of the user referenced by this row.
OctetStringr/w
Constraints:
range: 1-255
 .1.3.6.1.4.1.12740.17.1.38.1.5
eqlApplianceUserQueryUserName
The name of the user referenced by this row.
OctetStringr/w
Constraints:
range: 1-129
 .1.3.6.1.4.1.12740.17.1.38.1.6
eqlApplianceUserQueryRowStatus
This field is used to manage operations.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.12740.17.1.38.1.7
eqlApplianceUserQueryTotalUsers
This field indicates the total number of users returned by the query.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.12740.17.1.38.1.8
eqlApplianceUserQueryUserId
The ID of the user referenced by this row.
OctetStringr/w
Constraints:
range: 1-64
 .1.3.6.1.4.1.12740.17.1.38.1.9
eqlApplianceUserQueryUserPrimaryGroup
The domain name of the user referenced by this row.
OctetStringr/w
Constraints:
range: 1-184
 .1.3.6.1.4.1.12740.17.1.38.1.10
eqlApplianceUserQueryUserType
The type of the user referenced by this row.
Enumerationr/w
Enumerated Values:
0unused
1ad
2unix
 .1.3.6.1.4.1.12740.17.1.38.1.11
eqlApplianceUserQueryUserSource
The credential source of the user referenced by this row.
Enumerationr/w
Enumerated Values:
0unused
1local
2external
 .1.3.6.1.4.1.12740.17.1.38.1.12

eqlApplianceDnsServerTable

table
.1.3.6.1.4.1.12740.17.1.39 · 1 row entry · 5 columns
Open in standard view
Uses the equallogic variant from /opt/observium/mibs/equallogic.
Command help
Walk eqlApplianceDnsServerTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLAPPLIANCE-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLAPPLIANCE-MIB::eqlApplianceDnsServerTable' 
EqualLogic-Dynamic table used to store DNS servers for a NAS appliance.
TimeoutAll:60
eqlApplianceDnsServerEntry row .1.3.6.1.4.1.12740.17.1.39.1
An entry contains the antivirus host information for a NAS appliance.
Indexes
Column Syntax OID
eqlApplianceDnsServerIndex
This field specifies an index that uniquely identifies the DNS server entry.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.12740.17.1.39.1.1
eqlApplianceDnsServerRowStatus
This field is used to manage the conceptual row entry.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.12740.17.1.39.1.2
eqlApplianceDnsServerInetAddressType
This field contains the IP address type for the DNS server.
INET-ADDRESS-MIBInetAddressTyper/w
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.12740.17.1.39.1.3
eqlApplianceDnsServerInetAddress
This field contains the IP address, in network byte order, for the DNS server.
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.12740.17.1.39.1.4
eqlApplianceDnsServerTransactionState
This field denotes the transaction state of the operations on the eqlApplianceDnsServerTable.
To accumulate multiple create/destroy op into a single transaction, the TransactionState
in the first row should be configSta…
Enumerationr/w
Enumerated Values:
0singleOp
1configStart
2configInProgress
3configCommit
4configStartCommit
 .1.3.6.1.4.1.12740.17.1.39.1.5

eqlApplianceDnsSuffixTable

table
.1.3.6.1.4.1.12740.17.1.40 · 1 row entry · 4 columns
Open in standard view
Uses the equallogic variant from /opt/observium/mibs/equallogic.
Command help
Walk eqlApplianceDnsSuffixTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLAPPLIANCE-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLAPPLIANCE-MIB::eqlApplianceDnsSuffixTable' 
EqualLogic-Dynamic table used to store DNS suffixes for a NAS appliance.
TimeoutAll:60
eqlApplianceDnsSuffixEntry row .1.3.6.1.4.1.12740.17.1.40.1
An entry contains the antivirus host information for a NAS appliance.
Indexes
Column Syntax OID
eqlApplianceDnsSuffixIndex
This field specifies an index that uniquely identifies the DNS suffix entry.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.12740.17.1.40.1.1
eqlApplianceDnsSuffixRowStatus
This field is used to manage the conceptual row entry.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.12740.17.1.40.1.2
eqlApplianceDnsSuffixString
This field contains a domain suffix for DNS lookup.
OctetStringr/w
Constraints:
range: 0-127
 .1.3.6.1.4.1.12740.17.1.40.1.3
eqlApplianceDnsSuffixTransactionState
This field denotes the transaction state of the operations on the eqlApplianceDnsSuffixTable.
To accumulate multiple create/destroy op into a single transaction, the TransactionState
in the first row should be configSta…
Enumerationr/w
Enumerated Values:
0singleOp
1configStart
2configInProgress
3configCommit
4configStartCommit
 .1.3.6.1.4.1.12740.17.1.40.1.4

eqlApplianceDomainListTable

table
.1.3.6.1.4.1.12740.17.1.41 · 1 row entry · 2 columns
Open in standard view
Uses the equallogic variant from /opt/observium/mibs/equallogic.
Command help
Walk eqlApplianceDomainListTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLAPPLIANCE-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLAPPLIANCE-MIB::eqlApplianceDomainListTable' 
Equallogic-Dynamic Appliance Domain list Table.
This table provides the ability to list all of the Domains for a particular
Appliance.
 TimeoutAll:60
eqlApplianceDomainListEntry row .1.3.6.1.4.1.12740.17.1.41.1
An entry (row) containing the domain information.
Indexes
Column Syntax OID
eqlApplianceDomainName
This field indicates the domain name.
OctetStringr/w
Constraints:
range: 1-129
 .1.3.6.1.4.1.12740.17.1.41.1.1
eqlApplianceDomainType
this field indicates the domain type.
Enumerationr/w
Enumerated Values:
0unused
1ad
2unix
3local
 .1.3.6.1.4.1.12740.17.1.41.1.2

eqlApplianceGroupQueryTable

table
.1.3.6.1.4.1.12740.17.1.42 · 1 row entry · 11 columns
Open in standard view
Uses the equallogic variant from /opt/observium/mibs/equallogic.
Command help
Walk eqlApplianceGroupQueryTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLAPPLIANCE-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLAPPLIANCE-MIB::eqlApplianceGroupQueryTable' 
Equallogic-Dynamic Appliance User search Table.
This table provides the ability to search for a particular
user in any of the 3 DBs provided, LocalUser, AD User, NIS/LDAP User.
 TimeoutAll:60
eqlApplianceGroupQueryEntry row .1.3.6.1.4.1.12740.17.1.42.1
An entry (row) containing the Appliance User search information.
Indexes
Column Syntax OID
eqlApplianceGroupQuerySearchString
The search string used for the query.
OctetStringr/w
Constraints:
range: 1-129
 .1.3.6.1.4.1.12740.17.1.42.1.1
eqlApplianceGroupQueryDBType
This field indicates on which database to perform the query.
Enumerationr/w
Enumerated Values:
0unused
1ad
2unix
3all
4local
 .1.3.6.1.4.1.12740.17.1.42.1.2
eqlApplianceGroupQueryPageSize
This field indicates the page size for the query result.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.12740.17.1.42.1.3
eqlApplianceGroupQueryPageNumber
This field indicates the page number for the query.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.12740.17.1.42.1.4
eqlApplianceGroupQueryDomain
The domain name of the group referenced by this row.
OctetStringr/w
Constraints:
range: 1-255
 .1.3.6.1.4.1.12740.17.1.42.1.5
eqlApplianceGroupQueryGroupName
The name of the group referenced by this row.
OctetStringr/w
Constraints:
range: 1-129
 .1.3.6.1.4.1.12740.17.1.42.1.6
eqlApplianceGroupQueryRowStatus
This field is used to manage operations.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.12740.17.1.42.1.7
eqlApplianceGroupQueryTotalGroups
This field indicates the total number of groups returned by the query.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.12740.17.1.42.1.8
eqlApplianceGroupQueryGroupId
The ID of the group referenced by this row.
OctetStringr/w
Constraints:
range: 1-64
 .1.3.6.1.4.1.12740.17.1.42.1.9
eqlApplianceGroupQueryGroupType
The type of the group referenced by this row.
Enumerationr/w
Enumerated Values:
0unused
1ad
2unix
 .1.3.6.1.4.1.12740.17.1.42.1.10
eqlApplianceGroupQueryGroupSource
The credential source of the group referenced by this row.
Enumerationr/w
Enumerated Values:
0unused
1local
2external
 .1.3.6.1.4.1.12740.17.1.42.1.11