ENTERASYS-VRRP-EXT-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
3
Rows
3
Columns
16
.1.3.6.1.4.1.5624.1.2.64.1.1 · 1 row entry · 6 columns
Uses the enterasys variant from /opt/observium/mibs/enterasys.
Command help
Walk etsysVrrpExtOperTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ENTERASYS-VRRP-EXT-MIB' -M '/opt/observium/mibs/enterasys:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ENTERASYS-VRRP-EXT-MIB::etsysVrrpExtOperTable'
Operations table for a VRRP router which consists of a
sequence (i.e., one or more conceptual rows) of
'EtsysVrrpExtOperEntry' items.
etsysVrrpExtOperEntry row .1.3.6.1.4.1.5624.1.2.64.1.1.1
An entry in the etsysVrrpExtOperTable containing the operational
characteristics of a virtual router. On a VRRP router,
a given virtual router is identified by a combination
of the ifIndex and VRID.
Column Syntax OID
This object contains the Virtual Router Identifier (VRID).
VRRP-MIBVrId
Type Constraints:
range: 1..255
.1.3.6.1.4.1.5624.1.2.64.1.1.1.1
The current state of the virtual router. This object has
six defined values

- `initialize', which indicates that all the
virtual router is waiting for a startup event.

- `back…
Enumeration
Enumerated Values:
1initialize
2backup
3master
4ifDown
5preemptDelay
.1.3.6.1.4.1.5624.1.2.64.1.1.1.2
Controls whether a virtual router in Master state
will accept packets addressed to the address owner's
address as its own if it is not the address
owner. Default is False.
Enumerationr/w
Enumerated Values:
1enable
2disable
.1.3.6.1.4.1.5624.1.2.64.1.1.1.3
The time interval, in seconds, before the backup router will
become master if vrrpOperPreemptMode is set to true.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.5624.1.2.64.1.1.1.4
The number of Critical IP addresses that are associated with this
virtual router. This number is equal to the number of rows
in the etsysVrrpExtCriticalIpAddrTable that correspond to a given
IF index/VRID pair.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.5624.1.2.64.1.1.1.5
Controls whether a virtual router in backup state
will accept packets to forward as if it was in master state.
Default is False.
Enumerationr/w
Enumerated Values:
1enable
2disable
.1.3.6.1.4.1.5624.1.2.64.1.1.1.6
.1.3.6.1.4.1.5624.1.2.64.1.2 · 1 row entry · 6 columns
Uses the enterasys variant from /opt/observium/mibs/enterasys.
Command help
Walk etsysVrrpExtCriticalIpAddrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ENTERASYS-VRRP-EXT-MIB' -M '/opt/observium/mibs/enterasys:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ENTERASYS-VRRP-EXT-MIB::etsysVrrpExtCriticalIpAddrTable'
The table of critical IP addresses associated with a virtual 
router.
etsysVrrpExtCriticalIpAddrEntry row .1.3.6.1.4.1.5624.1.2.64.1.2.1
An entry in the table contains an IP address that is
a critical interface. If the IP address goes down then
the operational priority shall be decremented by the
value of the critical IP priority. The operation priority…
Column Syntax OID
The assigned IP addresses that represents a critical
interface.
OctetString
Constraints:
range: 0-0
range: 4-4
range: 16-16
.1.3.6.1.4.1.5624.1.2.64.1.2.1.1
This object specifies value the virtual routers operational
priority should be decremented by when a critical interface
goes down.
Integer32r/w
Constraints:
range: 1-254
.1.3.6.1.4.1.5624.1.2.64.1.2.1.2
The current state of the critical IP address. This object has
two defined values
- `up', which indicates that critical IP is reachable.

- `down', which indicates that critical IP is not reachable.
Enumerationr/w
Enumerated Values:
1up
2down
.1.3.6.1.4.1.5624.1.2.64.1.2.1.3
The row status variable, used according to installation
and removal conventions for conceptual rows. Setting this
object to createAndGo(4) or createAndWait(5) results in the
addition of an associated address for a virtu…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.5624.1.2.64.1.2.1.4
Use a probe to obtain status for critical IP.

- A value of enable(1) indicates an ICMP probe will be sent to check
status.

- A value of disable(2) indicates the interface operational s…
Enumerationr/w
Enumerated Values:
1enable
2disable
.1.3.6.1.4.1.5624.1.2.64.1.2.1.5
A textual probe name use for the probe IP.
OctetStringr/w
Constraints:
range: 1-32
.1.3.6.1.4.1.5624.1.2.64.1.2.1.6
.1.3.6.1.4.1.5624.1.2.64.1.3 · 1 row entry · 4 columns
Uses the enterasys variant from /opt/observium/mibs/enterasys.
Command help
Walk etsysVrrpExtTrackedObjTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ENTERASYS-VRRP-EXT-MIB' -M '/opt/observium/mibs/enterasys:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ENTERASYS-VRRP-EXT-MIB::etsysVrrpExtTrackedObjTable'
The table of Tracked Object associated with a virtual router.
etsysVrrpExtTrackedObjEntry row .1.3.6.1.4.1.5624.1.2.64.1.3.1
An entry in the table contains the name of the tracked
object for detecting falures in network. If the tracked object resource
goes down then the operational priority shall be decremented by the
value of the tracked …
Column Syntax OID
The assigned name that represents a tracked object
interface.
OctetString
Constraints:
range: 1-32
.1.3.6.1.4.1.5624.1.2.64.1.3.1.1
This object specifies value the virtual routers operational
priority should be decremented by when a tracked interface
goes down.
Integer32r/w
Constraints:
range: 1-254
.1.3.6.1.4.1.5624.1.2.64.1.3.1.2
The current state of the critical IP address. This object has
two defined values
- `up', which indicates that critical IP is reachable.

- `down', which indicates that critical IP is not reachable.
Enumeration
Enumerated Values:
1up
2down
.1.3.6.1.4.1.5624.1.2.64.1.3.1.3
The row status variable, used according to installation
and removal conventions for conceptual rows. Setting this
object to createAndGo(4) or createAndWait(5) results in the
addition of an associated address for a virtu…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.5624.1.2.64.1.3.1.4