ENTERASYS-ESWITCH-MIB Table View

This table allows rate limiting of multicast frames 
received on bridge ports. A typical application of this 
might be to limit a broadcast storm to the confines 
of the LAN connected by the bridge.
          
All objects in this table must be saved across a system 
reset and/or a power cycle.

etsysESwitchRateLimitingEntry row .1.3.6.1.4.1.5624.1.2.10.1.2.1.1

An Entry (conceptual row) in the RateLimiting Table.
A collection of objects containing information for
enabling and configuring RateLimiting.

Indexes

IF-MIBifIndex

Column	Syntax	OID
etsysESwitchRateLimitSwitch DURABLE: By default, rate limiting will be disabled. It can be enabled by setting this object to 'true(1)'.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.5624.1.2.10.1.2.1.1.1
etsysESwitchRateLimit DURABLE: This is the maximum number of rate-limited frames per second that the bridge will forward per second.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5624.1.2.10.1.2.1.1.2

A list of interface entries.  The number of entries is
given by ifNumber, defined in MIB-II.

etsysESwitchAddrFilterEntry row .1.3.6.1.4.1.5624.1.2.10.1.3.1.1

A collection of objects containing information for a
given interface.

Indexes

IF-MIBifIndex

Column	Syntax	OID
etsysESwitchAddressFilter DURABLE: A switch that controls address filtering. When true, the bridge purges the learned entries from its forwarding database, stops its learning process, and forwards only frames with destination and source address…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.5624.1.2.10.1.3.1.1.1

A table for defining the meaning of the 'userEtherType' rows in the
etsysESwitchProtocolTable.

etsysESwitchEtherTypeEntry row .1.3.6.1.4.1.5624.1.2.10.1.4.1.1

Each row defines a particular EtherType that may be used as a basis
for protocol filtering and VLAN classification.

Indexes

etsysESwitchEtherTypeIndex

Column	Syntax	OID
etsysESwitchEtherTypeIndex A number between 1 and N that identifies a table row, and that serves to link entries in this table to those in etsysESwitchProtocolTable.	Integer32 Constraints: range: 1-1000	.1.3.6.1.4.1.5624.1.2.10.1.4.1.1.1
etsysESwitchEtherTypeValue Defines an EtherType for use with etsysESwitchESwitchProtocolTable.	OctetStringr/w Constraints: range: 2-2	.1.3.6.1.4.1.5624.1.2.10.1.4.1.1.2
etsysESwitchEtherTypeStatus This object indicates the administrative status of this entry. other(1) - This entry is currently in effect, but the conditions under which it will remain so differ from the ones described for the…	Enumerationr/w Enumerated Values: 1 other 2 invalid 3 permanent 4 deleteOnReset	.1.3.6.1.4.1.5624.1.2.10.1.4.1.1.3
etsysESwitchEtherTypePreempted If true, indicates that the switch has taken control of this row and its associated resources (e.g., to support 802.1x authentication).	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.5624.1.2.10.1.4.1.1.4

A table for configuring, and obtaining information about, protocol-
based filtering and VLAN assignment.

etsysESwitchProtocolEntry row .1.3.6.1.4.1.5624.1.2.10.1.4.2.1

Each row in etsysESwitchProtocolTable holds filtering instructions,
or VLAN classification instructions, for one (port, protocol) pair.

Indexes

etsysESwitchProtocolReceivePort etsysESwitchProtocolType etsysESwitchProtocolIndex

Column	Syntax	OID
etsysESwitchProtocolReceivePort Identifies the receive port to which the protocol filter is to be applied. The value '0' (when allowed) represents 'all ports'.	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.5624.1.2.10.1.4.2.1.1
etsysESwitchProtocolType Identifies the protocol type. The switch chip in the RoamAbout M2 can recognize nine predefined high-level protocol types, and up to three user-defined EtherTypes. (Some or all EtherType filters may be reserved for us…	Enumeration Enumerated Values: 1 userEtherType 2 ipv4 3 ipxEthernet 4 ipxRaw 5 ipxLlc 6 ipxSnap 7 sna 8 netBios 9 decnet 10 ipv6	.1.3.6.1.4.1.5624.1.2.10.1.4.2.1.2
etsysESwitchProtocolIndex When etsysESwitchProtocolType indicates a user-defined protocol type, this index should identify the corresponding protocol definition. That is, to say, for a 'userEtherType' row, this index should point to a row in the…	Integer32 Constraints: range: 1-1000	.1.3.6.1.4.1.5624.1.2.10.1.4.2.1.3
etsysESwitchProtocolConstraint Indicates what type of constraint the switch should apply to packets caught by the (port, protocol) filter. portMask(1) - Use the etsysESwitchProtocolAllowedToGoTo mask to determine where the pa…	Enumerationr/w Enumerated Values: 1 portMask 2 vlan	.1.3.6.1.4.1.5624.1.2.10.1.4.2.1.4
etsysESwitchProtocolAllowedToGoTo A port mask object indicating where packets that match this row's (port, protocol) filter are allowed to go. It applies when etsysESwitchProtocolConstraint has the value portMask(1) and this row is valid.	Q-BRIDGE-MIBPortListr/w	.1.3.6.1.4.1.5624.1.2.10.1.4.2.1.5
etsysESwitchProtocolVlanId A number identifying a VLAN to which packets that match this row's (port, protocol) filter should be assigned. It applies when etsysESwitchProtocolConstraint has the value vlan(2) and this row is valid.	Integer32r/w Constraints: range: 0-2147483647	.1.3.6.1.4.1.5624.1.2.10.1.4.2.1.6
etsysESwitchProtocolStatus This object indicates the administrative status of this entry. other(1) - This entry is currently in effect, but the conditions under which it will remain so differ from the ones described for the…	Enumerationr/w Enumerated Values: 1 other 2 invalid 3 permanent 4 deleteOnReset	.1.3.6.1.4.1.5624.1.2.10.1.4.2.1.7
etsysESwitchProtocolPreempted If true, indicates that the switch has taken control of this row and its associated resources (e.g., to support 802.1x authentication).	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.5624.1.2.10.1.4.2.1.8