ENTERASYS-CONVERGENCE-END-POINT-MIB

        This MIB module defines a portion of the SNMP MIB under
Enterasys Networks enterprise OID pertaining to
Convergence End Point management.
    
Source file
ENTERASYS-CONVERGENCE-END-POINT-MIB
Last revised
Identity
etsysConvergenceEndPointMIB
Base OID
1.3.6.1.4.1.5624.1.2.40
Imported Objects
ENTERASYS-MIB-NAMES etsysModules
IF-MIB ifIndex InterfaceIndex
INET-ADDRESS-MIB InetAddress InetAddressType
P-BRIDGE-MIB EnabledStatus
SNMP-FRAMEWORK-MIB SnmpAdminString
SNMPv2-CONF MODULE-COMPLIANCE (no object page) OBJECT-GROUP (no object page)
SNMPv2-SMI Integer32 MODULE-IDENTITY (no object page) OBJECT-TYPE (no object page)
SNMPv2-TC DateAndTime MacAddress RowStatus TEXTUAL-CONVENTION (no object page) TruthValue
Net-SNMP examples using the enterasys MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'ENTERASYS-CONVERGENCE-END-POINT-MIB' -M '/opt/observium/mibs/enterasys:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'ENTERASYS-CONVERGENCE-END-POINT-MIB::etsysConvergenceEndPointMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ENTERASYS-CONVERGENCE-END-POINT-MIB' -M '/opt/observium/mibs/enterasys:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ENTERASYS-CONVERGENCE-END-POINT-MIB::etsysConvergenceEndPointMIB'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (58)
.1.3.6.1.4.1.5624.1.2.40
.1.3.6.1.4.1.5624.1.2.40.1
.1.3.6.1.4.1.5624.1.2.40.1.1
.1.3.6.1.4.1.5624.1.2.40.1.1.1
.1.3.6.1.4.1.5624.1.2.40.1.1.2
.1.3.6.1.4.1.5624.1.2.40.1.1.2.1
.1.3.6.1.4.1.5624.1.2.40.1.1.2.1.1
Integer32
.1.3.6.1.4.1.5624.1.2.40.1.1.2.1.2
.1.3.6.1.4.1.5624.1.2.40.1.1.3
.1.3.6.1.4.1.5624.1.2.40.1.1.3.1
.1.3.6.1.4.1.5624.1.2.40.1.1.3.1.1
.1.3.6.1.4.1.5624.1.2.40.1.1.3.1.2
.1.3.6.1.4.1.5624.1.2.40.1.1.4
.1.3.6.1.4.1.5624.1.2.40.1.2
.1.3.6.1.4.1.5624.1.2.40.1.2.1
.1.3.6.1.4.1.5624.1.2.40.1.2.1.1
.1.3.6.1.4.1.5624.1.2.40.1.2.1.1.1
.1.3.6.1.4.1.5624.1.2.40.1.2.1.1.2
.1.3.6.1.4.1.5624.1.2.40.1.2.1.1.3
.1.3.6.1.4.1.5624.1.2.40.1.2.1.1.4
.1.3.6.1.4.1.5624.1.2.40.1.2.1.1.5
OctetString
.1.3.6.1.4.1.5624.1.2.40.1.2.1.1.6
.1.3.6.1.4.1.5624.1.2.40.1.2.1.1.7
.1.3.6.1.4.1.5624.1.2.40.1.2.1.1.8
.1.3.6.1.4.1.5624.1.2.40.1.2.2
.1.3.6.1.4.1.5624.1.2.40.1.2.2.1
.1.3.6.1.4.1.5624.1.2.40.1.2.2.1.1
.1.3.6.1.4.1.5624.1.2.40.1.2.3
.1.3.6.1.4.1.5624.1.2.40.1.2.3.1
.1.3.6.1.4.1.5624.1.2.40.1.2.3.1.1
Integer32
.1.3.6.1.4.1.5624.1.2.40.1.2.3.1.2
.1.3.6.1.4.1.5624.1.2.40.1.2.3.1.3
OctetString
.1.3.6.1.4.1.5624.1.2.40.1.2.3.1.4
.1.3.6.1.4.1.5624.1.2.40.1.2.3.1.5
.1.3.6.1.4.1.5624.1.2.40.1.2.3.1.6
.1.3.6.1.4.1.5624.1.2.40.1.3
.1.3.6.1.4.1.5624.1.2.40.1.3.1
.1.3.6.1.4.1.5624.1.2.40.1.3.2
.1.3.6.1.4.1.5624.1.2.40.1.3.2.1
Integer32
.1.3.6.1.4.1.5624.1.2.40.1.3.2.1.1
.1.3.6.1.4.1.5624.1.2.40.1.3.2.1.10
Enumeration
.1.3.6.1.4.1.5624.1.2.40.1.3.2.1.2
Bits
.1.3.6.1.4.1.5624.1.2.40.1.3.2.1.3
Integer32
.1.3.6.1.4.1.5624.1.2.40.1.3.2.1.4
Integer32
.1.3.6.1.4.1.5624.1.2.40.1.3.2.1.5
.1.3.6.1.4.1.5624.1.2.40.1.3.2.1.6
.1.3.6.1.4.1.5624.1.2.40.1.3.2.1.7
.1.3.6.1.4.1.5624.1.2.40.1.3.2.1.8
.1.3.6.1.4.1.5624.1.2.40.1.3.2.1.9
.1.3.6.1.4.1.5624.1.2.40.1.3.3
.1.3.6.1.4.1.5624.1.2.40.1.3.3.1
.1.3.6.1.4.1.5624.1.2.40.1.3.3.1.1
.1.3.6.1.4.1.5624.1.2.40.1.3.4
.1.3.6.1.4.1.5624.1.2.40.1.3.4.1
Integer32
.1.3.6.1.4.1.5624.1.2.40.1.3.4.1.1
.1.3.6.1.4.1.5624.1.2.40.2
.1.3.6.1.4.1.5624.1.2.40.2.1
.1.3.6.1.4.1.5624.1.2.40.2.2
Dependencies (11) 8 direct · 3 transitive Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Type Definitions (1)
Bits
ciscoIPphone(0)
siemensIPphone(1)
avayaCLan(2)
avayaMedPro(3)
genericH323(4)
sip(5)
lldpMed(6)
Conformance Groups (9)
Objects which provide global control of the Convergence
End Point features.
.1.3.6.1.4.1.5624.1.2.40.2.1.1
Objects which provide overrides to the global Convergence
End Point controls.
.1.3.6.1.4.1.5624.1.2.40.2.1.2
Objects that provide configuration information specific to
IP, port, and address based Convergence End Point detection.
.1.3.6.1.4.1.5624.1.2.40.2.1.3
Objects that provide status information for discovered
and detected Convergence End Points.
.1.3.6.1.4.1.5624.1.2.40.2.1.4
Objects that provide status information for discovered
and detected Convergence End Points.
.1.3.6.1.4.1.5624.1.2.40.2.1.5
Objects that provide configuration information specific to
IP, port, and address based Convergence End Point detection.
.1.3.6.1.4.1.5624.1.2.40.2.1.6
Objects that provide per port control for discovered
and detected Convergence End Points.
.1.3.6.1.4.1.5624.1.2.40.2.1.7
Objects that provide per port control for configuring Cisco
VOIP phones via Cisco CDP.
.1.3.6.1.4.1.5624.1.2.40.2.1.8
Objects which provide global control of the Convergence
End Point features.
.1.3.6.1.4.1.5624.1.2.40.2.1.9
Compliance Statements (5)

OID .1.3.6.1.4.1.5624.1.2.40.2.2.1
This compliance statement has been deprecated in favor of
the etsysConvEndPointCompliance2 group.
Required groups
mandatory etsysConvEndPointGlobalConfigGroup
mandatory etsysConvEndPointStatusGroup
optional etsysConvEndPointConfigGroup This group is mandatory for devices which support overrides
to device wide Policy Profiles.
optional etsysConvEndPointDetectionGroup This group is mandatory for devices which support IP port
and address based Convergence End Point detection.

OID .1.3.6.1.4.1.5624.1.2.40.2.2.2
The compliance statement for entities which implement
the Enterasys Convergence End Point Management MIB.
Required groups
mandatory etsysConvEndPointGlobalConfigGroup
mandatory etsysConvEndPointStatusGroup2
optional etsysConvEndPointConfigGroup This group is mandatory for devices which support overrides
to device wide policy profiles.
optional etsysConvEndPointDetectionGroup2 This group is mandatory for devices which support IP, port,
and address based Convergence End Point detection.

OID .1.3.6.1.4.1.5624.1.2.40.2.2.3
The compliance statement for devices that support per port
configuration of Convergence End Point detection and
discovery.
Required groups
optional etsysConvEndPointPortConfigGroup This group is mandatory for all devices that support per
port configuration of Convergence End Point detection and
discovery.

OID .1.3.6.1.4.1.5624.1.2.40.2.2.4
The compliance statement for devices that support detection
and configuration of Cisco VOIP phones via Cisco CDP.
Required groups
optional etsysConvEndPointCiscoVoiceVLANGroup This group is mandatory for all devices that support
detection and configuration of Cisco VOIP phones via Cisco
CDP.

OID .1.3.6.1.4.1.5624.1.2.40.2.2.5
The compliance statement for entities which implement
the Enterasys Convergence End Point Management MIB.
Required groups
mandatory etsysConvEndPointGlobalConfigGroup2
mandatory etsysConvEndPointStatusGroup2
optional etsysConvEndPointConfigGroup This group is mandatory for devices which support overrides
to device wide policy profiles.
optional etsysConvEndPointDetectionGroup2 This group is mandatory for devices which support IP, port,
and address based Convergence End Point detection.