ENGENIUS-MESH-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
37
Rows
37
Columns
355

ethernetInterfaceTable

table
.1.3.6.1.4.1.14125.1.2.2.1 · 1 row entry · 10 columns
Open in standard view
Uses the engenius variant from /opt/observium/mibs/engenius.
Command help
Walk ethernetInterfaceTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ENGENIUS-MESH-MIB' -M '/opt/observium/mibs/engenius:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ENGENIUS-MESH-MIB::ethernetInterfaceTable' 
This table contains the information of the ethernet interfaces.
ethernetInterfaceTableEntry row .1.3.6.1.4.1.14125.1.2.2.1.1
Represent the entry in the Ethernet Interface table.
Indexes
Column Syntax OID
ethInterfaceTableIndex
Specify the index of the Ethernet interface table.
Integer32
Constraints:
range: 0-2
 .1.3.6.1.4.1.14125.1.2.2.1.1.1
ethInterfaceTableName
The name of the ethernet interface.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.14125.1.2.2.1.1.2
ethInterfaceTableBase
The base name of the ethernet interface.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.14125.1.2.2.1.1.3
ethInterfaceTableMac
The hardware address of the interface.
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.14125.1.2.2.1.1.4
ethInterfaceTableBridge
The bridge interface that the current ethernet interface is attached to.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.14125.1.2.2.1.1.5
ethInterfaceTableBridgeCost
The cost of the bridge interface that the current ethernet interface is attached to.
Integer32r/w
Constraints:
range: 0-65536
 .1.3.6.1.4.1.14125.1.2.2.1.1.6
ethInterfaceTableBridgePrio
The priority of the bridge interface that the current ethernet interface is attached to.
Integer32r/w
Constraints:
range: 0-65536
 .1.3.6.1.4.1.14125.1.2.2.1.1.7
ethInterfaceTableComments
An optional comment associated to entry of the ethernet interface table.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.14125.1.2.2.1.1.8
ethInterfaceTableActive
The status of the Ethernet interface table entry.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.14125.1.2.2.1.1.9
ethInterfaceTableRowStatus
The row status in the Ethernet interface table entry
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.14125.1.2.2.1.1.10

wirelessInterfaceTable

table
.1.3.6.1.4.1.14125.1.2.3.1 · 1 row entry · 30 columns
Open in standard view
Uses the engenius variant from /opt/observium/mibs/engenius.
Command help
Walk wirelessInterfaceTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ENGENIUS-MESH-MIB' -M '/opt/observium/mibs/engenius:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ENGENIUS-MESH-MIB::wirelessInterfaceTable' 
This table contains the information of the Wireless interfaces.
wirelessInterfaceTableEntry row .1.3.6.1.4.1.14125.1.2.3.1.1
Represent the entry in the Wireless interface table.
Indexes
Column Syntax OID
wlanInterfaceTableIndex
Specify the index of the Wireless interface table.
Integer32
Constraints:
range: 0-52
 .1.3.6.1.4.1.14125.1.2.3.1.1.1
wlanInterfaceTableName
The name of the Wireless interface.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.14125.1.2.3.1.1.2
wlanInterfaceTableBase
The base name of the Wireless interface.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.14125.1.2.3.1.1.3
wlanInterfaceTableBridge
The bridge interface that the current wireless interface is attached to.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.14125.1.2.3.1.1.4
wlanInterfaceTableBridgeCost
The cost of the bridge interface that the current wireless interface is attached to.
Integer32r/w
Constraints:
range: 0-65536
 .1.3.6.1.4.1.14125.1.2.3.1.1.5
wlanInterfaceTableBridgePrio
The priority of the bridge interface that the current wireless interface is attached to.
Integer32r/w
Constraints:
range: 0-65536
 .1.3.6.1.4.1.14125.1.2.3.1.1.6
wlanInterfaceTableMode
The operating mode of the wireless interface.
Enumerationr/w
Enumerated Values:
1ap
2sta
3adhoc
4wds
 .1.3.6.1.4.1.14125.1.2.3.1.1.7
wlanInterfaceTableBand
The Operating band of the wireless interface.
Enumerationr/w
Enumerated Values:
1dot11a
2dot11b
3dot11g
 .1.3.6.1.4.1.14125.1.2.3.1.1.8
wlanInterfaceTableEssid
The Essid of the wireless interface table entry.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.14125.1.2.3.1.1.9
wlanInterfaceTableFreq
The operating frequency of the wireless interface.
Integer32r/w
Constraints:
range: 0-65536
 .1.3.6.1.4.1.14125.1.2.3.1.1.10
wlanInterfaceTableMac
The hardware address of the interface.
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.14125.1.2.3.1.1.11
wlanInterfaceTableSecurity
The security mode of the wireless interface entry.
Enumerationr/w
Enumerated Values:
1open
2wep
3wpa1
4aes
5wpa2
6wpa1n2
 .1.3.6.1.4.1.14125.1.2.3.1.1.12
wlanInterfaceTableWpaType
The WPA Type of the wireless interface using.
Enumerationr/w
Enumerated Values:
1tkip
2aes
 .1.3.6.1.4.1.14125.1.2.3.1.1.13
wlanInterfaceTableDot1x
Enable the radius server as authenticator for the current wireless interface entry.
Enumerationr/w
Enumerated Values:
1true
2false
 .1.3.6.1.4.1.14125.1.2.3.1.1.14
wlanInterfaceTableEncryptionKey
The key used with WEP encryption.
OctetStringr/w
Constraints:
range: 0-64
 .1.3.6.1.4.1.14125.1.2.3.1.1.15
wlanInterfaceTableBroadcastSsid
Enable or disable broadcast ESSID.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.14125.1.2.3.1.1.16
wlanInterfaceTableBeaconInt
The beacon interval in mili seconds.
Integer32r/w
Constraints:
range: 20-1000
 .1.3.6.1.4.1.14125.1.2.3.1.1.17
wlanInterfaceTableRtsThreshold
The RTS Threshold.
Integer32r/w
Constraints:
range: 256-2346
 .1.3.6.1.4.1.14125.1.2.3.1.1.18
wlanInterfaceTableFragThreshold
The Fragment Threshold (Even Number only).
Integer32r/w
Constraints:
range: 1500-2346
 .1.3.6.1.4.1.14125.1.2.3.1.1.19
wlanInterfaceTableDtimInterval
The DTIM interval.
Integer32r/w
Constraints:
range: 1-256
 .1.3.6.1.4.1.14125.1.2.3.1.1.20
wlanInterfaceTableDatarate
The Data rate, available choice are auto(0), 1, 2, 5, 6, 9, 11, 12, 18, 24, 36, 48 and 54.
Integer32r/w
Constraints:
range: 0-54
 .1.3.6.1.4.1.14125.1.2.3.1.1.21
wlanInterfaceTableDiversity
Select to enable or disable the diversity of the antenna.
Enumerationr/w
Enumerated Values:
1enable
2disable
3carddefault
 .1.3.6.1.4.1.14125.1.2.3.1.1.22
wlanInterfaceTableTxAntenna
Select the type of the transmission antenna.
Enumerationr/w
Enumerated Values:
0diversity
1port1
2port2
3carddefault
 .1.3.6.1.4.1.14125.1.2.3.1.1.23
wlanInterfaceTableRxAntenna
Select the type of the receiving antenna.
Enumerationr/w
Enumerated Values:
0diversity
1port1
2port2
3carddefault
 .1.3.6.1.4.1.14125.1.2.3.1.1.24
wlanInterfaceTableCrntTxPower
The current Transmit Power level in dBm of the device wireless card.
Integer32r/w
Constraints:
range: 0-9999
 .1.3.6.1.4.1.14125.1.2.3.1.1.25
wlanInterfaceTableTxPower
The Transmit Power level in dBm (0-27) of the wireless card, where 9999 indicates MAX value of the card.
Integer32r/w
Constraints:
range: 0-9999
 .1.3.6.1.4.1.14125.1.2.3.1.1.26
wlanInterfaceTableSeperation
Enable or disable wireless seperation.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.14125.1.2.3.1.1.27
wlanInterfaceTableComments
An optional comment associated to entry of the wireless interface table.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.14125.1.2.3.1.1.28
wlanInterfaceTableActive
The status of the Wireless interface table entry.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.14125.1.2.3.1.1.29
wlanInterfaceTableRowStatus
The row status in the Wireless interface table entry
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.14125.1.2.3.1.1.30

wirelessFrequencyMeshTable

table
.1.3.6.1.4.1.14125.1.2.3.2 · 1 row entry · 4 columns
Open in standard view
Uses the engenius variant from /opt/observium/mibs/engenius.
Command help
Walk wirelessFrequencyMeshTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ENGENIUS-MESH-MIB' -M '/opt/observium/mibs/engenius:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ENGENIUS-MESH-MIB::wirelessFrequencyMeshTable' 
This table display the available frequency channel of the Wireless Mesh interface.
wirelessFrequencyMeshTableEntry row .1.3.6.1.4.1.14125.1.2.3.2.1
Represent the entry in the Wireless Mesh frequency table.
Indexes
Column Syntax OID
wlanFrequencyMeshTableIndex
Specify the index of the Wireless Mesh interface table.
Integer32
Constraints:
range: 0-100
 .1.3.6.1.4.1.14125.1.2.3.2.1.1
wlanFrequencyMeshTableChannel
The channel number of the frequency.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.14125.1.2.3.2.1.2
wlanFrequencyMeshTableFrequency
The frequency level in Giga Hertz.
OctetString .1.3.6.1.4.1.14125.1.2.3.2.1.3
wlanFrequencyMeshTableRowStatus
The row status in the Wireless Mesh frequency table entry
SNMPv2-TCRowStatus
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.14125.1.2.3.2.1.4

wirelessFrequencyAp0Table

table
.1.3.6.1.4.1.14125.1.2.3.3 · 1 row entry · 4 columns
Open in standard view
Uses the engenius variant from /opt/observium/mibs/engenius.
Command help
Walk wirelessFrequencyAp0Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ENGENIUS-MESH-MIB' -M '/opt/observium/mibs/engenius:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ENGENIUS-MESH-MIB::wirelessFrequencyAp0Table' 
This table display the available frequency channel of the wireless access point radio 1 card.
wirelessFrequencyAp0TableEntry row .1.3.6.1.4.1.14125.1.2.3.3.1
Represent the entry in the Wireless radio 1 frequency table.
Indexes
Column Syntax OID
wlanFrequencyAp0TableIndex
Specify the index of the Wireless radio 1 interface table.
Integer32
Constraints:
range: 0-100
 .1.3.6.1.4.1.14125.1.2.3.3.1.1
wlanFrequencyAp0TableChannel
The channel number of the frequency.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.14125.1.2.3.3.1.2
wlanFrequencyAp0TableFrequency
The frequency level in Giga Hertz.
OctetString .1.3.6.1.4.1.14125.1.2.3.3.1.3
wlanFrequencyAp0TableRowStatus
The row status in the Wireless radio 1 frequency table entry
SNMPv2-TCRowStatus
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.14125.1.2.3.3.1.4

wirelessFrequencyAp1Table

table
.1.3.6.1.4.1.14125.1.2.3.4 · 1 row entry · 4 columns
Open in standard view
Uses the engenius variant from /opt/observium/mibs/engenius.
Command help
Walk wirelessFrequencyAp1Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ENGENIUS-MESH-MIB' -M '/opt/observium/mibs/engenius:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ENGENIUS-MESH-MIB::wirelessFrequencyAp1Table' 
This table display the available frequency channel of the wireless access point radio 2 (if exist).
wirelessFrequencyAp1TableEntry row .1.3.6.1.4.1.14125.1.2.3.4.1
Represent the entry in the Wireless radio 2 frequency table.
Indexes
Column Syntax OID
wlanFrequencyAp1TableIndex
Specify the index of the Wireless radio 2 interface table.
Integer32
Constraints:
range: 0-100
 .1.3.6.1.4.1.14125.1.2.3.4.1.1
wlanFrequencyAp1TableChannel
The channel number of the frequency.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.14125.1.2.3.4.1.2
wlanFrequencyAp1TableFrequency
The frequency level in Giga Hertz.
OctetString .1.3.6.1.4.1.14125.1.2.3.4.1.3
wlanFrequencyAp1TableRowStatus
The row status in the Wireless radio 2 frequency table entry
SNMPv2-TCRowStatus
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.14125.1.2.3.4.1.4

vlanInterfaceTable

table
.1.3.6.1.4.1.14125.1.2.4.1 · 1 row entry · 11 columns
Open in standard view
Uses the engenius variant from /opt/observium/mibs/engenius.
Command help
Walk vlanInterfaceTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ENGENIUS-MESH-MIB' -M '/opt/observium/mibs/engenius:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ENGENIUS-MESH-MIB::vlanInterfaceTable' 
This table contains the information of the VLAN interfaces.
vlanInterfaceTableEntry row .1.3.6.1.4.1.14125.1.2.4.1.1
Represent the entry in the VLAN interface table.
Indexes
Column Syntax OID
vlanInterfaceTableIndex
Specify the index of the VLAN interface table.
Integer32
Constraints:
range: 0-32
 .1.3.6.1.4.1.14125.1.2.4.1.1.1
vlanInterfaceTableName
The name of the VLAN interface.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.14125.1.2.4.1.1.2
vlanInterfaceTableBase
The base name of the VLAN interface.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.14125.1.2.4.1.1.3
vlanInterfaceTableMac
The hardware address of the interface.
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.14125.1.2.4.1.1.4
vlanInterfaceTableId
The VLAN ID for the table entry.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.14125.1.2.4.1.1.5
vlanInterfaceTableBridge
The bridge interface that the current VLAN interface is attached to.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.14125.1.2.4.1.1.6
vlanInterfaceTableBridgeCost
The cost of the bridge interface that the current VLAN interface is attached to.
Integer32r/w
Constraints:
range: 0-65536
 .1.3.6.1.4.1.14125.1.2.4.1.1.7
vlanInterfaceTableBridgePrio
The priority of the bridge interface that the current VLAN interface is attached to.
Integer32r/w
Constraints:
range: 0-65536
 .1.3.6.1.4.1.14125.1.2.4.1.1.8
vlanInterfaceTableComments
An optional comment associated to entry of the VLAN interface table.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.14125.1.2.4.1.1.9
vlanInterfaceTableActive
The status of the VLAN interface table entry.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.14125.1.2.4.1.1.10
vlanInterfaceTableRowStatus
The row status in the VLAN interface table entry
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.14125.1.2.4.1.1.11

bridgeInterfaceTable

table
.1.3.6.1.4.1.14125.1.2.5.1 · 1 row entry · 12 columns
Open in standard view
Uses the engenius variant from /opt/observium/mibs/engenius.
Command help
Walk bridgeInterfaceTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ENGENIUS-MESH-MIB' -M '/opt/observium/mibs/engenius:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ENGENIUS-MESH-MIB::bridgeInterfaceTable' 
This table contains the information of the bridge interfaces.
bridgeInterfaceTableEntry row .1.3.6.1.4.1.14125.1.2.5.1.1
Represent the entry in the Bridge Interface table.
Indexes
Column Syntax OID
bridgeInterfaceTableIndex
Specify the index of the Bridge interface table.
Integer32
Constraints:
range: 0-16
 .1.3.6.1.4.1.14125.1.2.5.1.1.1
bridgeInterfaceTableName
The name of the Bridge interface.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.14125.1.2.5.1.1.2
bridgeInterfaceTableMac
The hardware address of the interface.
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.14125.1.2.5.1.1.3
bridgeInterfaceTableAge
The bridge ageing time.
Integer32r/w
Constraints:
range: 0-65536
 .1.3.6.1.4.1.14125.1.2.5.1.1.4
bridgeInterfaceTablePrio
The priority of the bridge interface.
Integer32r/w
Constraints:
range: 0-65536
 .1.3.6.1.4.1.14125.1.2.5.1.1.5
bridgeInterfaceTableFwdDelay
The bridge forwarding delay.
Integer32r/w
Constraints:
range: 0-65536
 .1.3.6.1.4.1.14125.1.2.5.1.1.6
bridgeInterfaceTableHelloInt
The Hello Interval of the bridge interface.
Integer32r/w
Constraints:
range: 0-65536
 .1.3.6.1.4.1.14125.1.2.5.1.1.7
bridgeInterfaceTableMaxAge
The bridge maximum message age.
Integer32r/w
Constraints:
range: 0-65536
 .1.3.6.1.4.1.14125.1.2.5.1.1.8
bridgeInterfaceTableStp
Turn on or off the Spanning Tree Protocol.
Enumerationr/w
Enumerated Values:
1on
2off
 .1.3.6.1.4.1.14125.1.2.5.1.1.9
bridgeInterfaceTableComments
An optional comment associated to entry of the bridge interface table.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.14125.1.2.5.1.1.10
bridgeInterfaceTableActive
The status of the bridge interface table entry.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.14125.1.2.5.1.1.11
bridgeInterfaceTableRowStatus
The row status in the Bridge interface table entry.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.14125.1.2.5.1.1.12

ipAddressesTable

table
.1.3.6.1.4.1.14125.1.2.6.1 · 1 row entry · 11 columns
Open in standard view
Uses the engenius variant from /opt/observium/mibs/engenius.
Command help
Walk ipAddressesTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ENGENIUS-MESH-MIB' -M '/opt/observium/mibs/engenius:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ENGENIUS-MESH-MIB::ipAddressesTable' 
This table contains the information of the IP Addresses.
ipAddressesTableEntry row .1.3.6.1.4.1.14125.1.2.6.1.1
Represent the entry in the IP Address Table.
Indexes
Column Syntax OID
ipAddressesTableIndex
Specify the index of the IP Address table.
Integer32
Constraints:
range: 0-64
 .1.3.6.1.4.1.14125.1.2.6.1.1.1
ipAddressesTableIface
The name of the interface.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.14125.1.2.6.1.1.2
ipAddressesTableType
The type of IP Address: Static or DHCP.
Enumerationr/w
Enumerated Values:
1static
2dhcp
3pppoe
4ipalias
 .1.3.6.1.4.1.14125.1.2.6.1.1.3
ipAddressesTableIp
The IP Address.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.14125.1.2.6.1.1.4
ipAddressesTableNetmask
The Netmask for IP Address.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.14125.1.2.6.1.1.5
ipAddressesTableBroadcast
The Broadcast IP for the IP Address.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.14125.1.2.6.1.1.6
ipAddressesTableGateway
The Gateway IP for the IP Address.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.14125.1.2.6.1.1.7
ipAddressesTableRouted
The type of the IP Address table entry.
Enumerationr/w
Enumerated Values:
1routable
2nat
 .1.3.6.1.4.1.14125.1.2.6.1.1.8
ipAddressesTableComments
An optional comment associated to entry of the IP Address table.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.14125.1.2.6.1.1.9
ipAddressesTableActive
The status of the IP Address table entry.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.14125.1.2.6.1.1.10
ipAddressesTableRowStatus
The row status in the IP Address table entry.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.14125.1.2.6.1.1.11

olsrInterfaceTable

table
.1.3.6.1.4.1.14125.1.2.9.15 · 1 row entry · 13 columns
Open in standard view
Uses the engenius variant from /opt/observium/mibs/engenius.
Command help
Walk olsrInterfaceTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ENGENIUS-MESH-MIB' -M '/opt/observium/mibs/engenius:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ENGENIUS-MESH-MIB::olsrInterfaceTable' 
This table contains the information of the OLSR interfaces.
olsrInterfaceTableEntry row .1.3.6.1.4.1.14125.1.2.9.15.1
Represent the entry in the OLSR Interface table.
Indexes
Column Syntax OID
olsrInterfaceTableIndex
Specify the index of the OLSR interface table.
Integer32
Constraints:
range: 0-10
 .1.3.6.1.4.1.14125.1.2.9.15.1.1
olsrInterfaceTableIface
The name of the OLSR interface.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.14125.1.2.9.15.1.2
olsrInterfaceTableHelloInterval
The hello interval of the OLSR interface.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.14125.1.2.9.15.1.3
olsrInterfaceTableHelloValidity
The hello validity of the OLSR interface.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.14125.1.2.9.15.1.4
olsrInterfaceTableTcInterval
The TC interval of the OLSR interface.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.14125.1.2.9.15.1.5
olsrInterfaceTableTcValidity
The TC validity of the OLSR interface.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.14125.1.2.9.15.1.6
olsrInterfaceTableMidInterval
The MID interval of the OLSR interface.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.14125.1.2.9.15.1.7
olsrInterfaceTableMidValidity
The MID validity of the OLSR interface.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.14125.1.2.9.15.1.8
olsrInterfaceTableHnaInterval
The HNA interval of the OLSR interface.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.14125.1.2.9.15.1.9
olsrInterfaceTableHnaValidity
The HNA validity of the OLSR interface.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.14125.1.2.9.15.1.10
olsrInterfaceTableComments
An optional description regarding the entry of the Olsr Interface table.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.14125.1.2.9.15.1.11
olsrInterfaceTableActive
The status of the OLSR Interface table entry.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.14125.1.2.9.15.1.12
olsrInterfaceTableRowStatus
The row status in the OLSR Interface table entry.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.14125.1.2.9.15.1.13

routeTable

table
.1.3.6.1.4.1.14125.1.2.10.1 · 1 row entry · 9 columns
Open in standard view
Uses the engenius variant from /opt/observium/mibs/engenius.
Command help
Walk routeTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ENGENIUS-MESH-MIB' -M '/opt/observium/mibs/engenius:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ENGENIUS-MESH-MIB::routeTable' 
This table contains the information of the Route settings.
routeTableEntry row .1.3.6.1.4.1.14125.1.2.10.1.1
Represent the entry in the Route table.
Indexes
Column Syntax OID
routeTableIndex
Specify the index of the routing table.
Integer32
Constraints:
range: 0-128
 .1.3.6.1.4.1.14125.1.2.10.1.1.1
routeTableSubnet
The destination Subnet of the routing rule.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.14125.1.2.10.1.1.2
routeTableNetmask
The Netmask for the destination subnet of the routing rule.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.14125.1.2.10.1.1.3
routeTableGateway
The next hop gateway IP Address.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.14125.1.2.10.1.1.4
routeTableDevice
The Device Interface Name.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.14125.1.2.10.1.1.5
routeTableDirect
The type of routing: direct or indirect.
Enumerationr/w
Enumerated Values:
1direct
2indirect
 .1.3.6.1.4.1.14125.1.2.10.1.1.6
routeTableComments
An optional description regarding the entry of the Routing table.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.14125.1.2.10.1.1.7
routeTableActive
The status of the Routing table entry.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.14125.1.2.10.1.1.8
routeTableRowStatus
The row status in the Routing table entry.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.14125.1.2.10.1.1.9

ntpTable

table
.1.3.6.1.4.1.14125.1.2.11.3 · 1 row entry · 7 columns
Open in standard view
Uses the engenius variant from /opt/observium/mibs/engenius.
Command help
Walk ntpTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ENGENIUS-MESH-MIB' -M '/opt/observium/mibs/engenius:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ENGENIUS-MESH-MIB::ntpTable' 
This is the Network Time Protocol servers table.
ntpTableEntry row .1.3.6.1.4.1.14125.1.2.11.3.1
Represent the entry in the NTP table.
Indexes
Column Syntax OID
ntpTableIndex
Specify the index of the NTP table.
Integer32
Constraints:
range: 0-8
 .1.3.6.1.4.1.14125.1.2.11.3.1.1
ntpTableServer
The name of the NTP Server.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.14125.1.2.11.3.1.2
ntpTableMinPoll
The minimum poll time in seconds.
Integer32r/w
Constraints:
range: 0-10
 .1.3.6.1.4.1.14125.1.2.11.3.1.3
ntpTableMaxPoll
The maximum poll time in seconds.
Integer32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.14125.1.2.11.3.1.4
ntpTableComments
An optional description regarding the entry of the NTP table.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.14125.1.2.11.3.1.5
ntpTableActive
The status of the NTP table entry.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.14125.1.2.11.3.1.6
ntpTableRowStatus
The row status in the NTP table entry.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.14125.1.2.11.3.1.7

dhcpdTable

table
.1.3.6.1.4.1.14125.1.2.12.1 · 1 row entry · 14 columns
Open in standard view
Uses the engenius variant from /opt/observium/mibs/engenius.
Command help
Walk dhcpdTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ENGENIUS-MESH-MIB' -M '/opt/observium/mibs/engenius:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ENGENIUS-MESH-MIB::dhcpdTable' 
This is the DHCP server table.
dhcpdTableEntry row .1.3.6.1.4.1.14125.1.2.12.1.1
Represent the entry in the DHCP server table.
Indexes
Column Syntax OID
dhcpdTableIndex
Specify the index of the DHCP server table.
Integer32
Constraints:
range: 0-16
 .1.3.6.1.4.1.14125.1.2.12.1.1.1
dhcpdTableIface
Specify the interface name of the DHCP server table entry.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.14125.1.2.12.1.1.2
dhcpdTableSubnet
Specify the Subnet Address for the DHCP server table entry.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.14125.1.2.12.1.1.3
dhcpdTableNetstart
Specify the Starting IP Address for the DHCP server table entry.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.14125.1.2.12.1.1.4
dhcpdTableNetend
Specify the Ending IP Address for the DHCP server table entry.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.14125.1.2.12.1.1.5
dhcpdTableNetmask
Specify the Netmask for the subnet Address for the DHCP server table entry.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.14125.1.2.12.1.1.6
dhcpdTableMaxLease
Specify the maximum lease time for the DHCP server table entry.
Integer32r/w
Constraints:
range: 600-864000
 .1.3.6.1.4.1.14125.1.2.12.1.1.7
dhcpdTableLease
Specify the default lease time for the DHCP server table entry.
Integer32r/w
Constraints:
range: 600-864000
 .1.3.6.1.4.1.14125.1.2.12.1.1.8
dhcpdTableDomain
The domain name of the DHCP server table's entry.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.14125.1.2.12.1.1.9
dhcpdTableDns
Specify the DNS IP Address for the DHCP server table entry.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.14125.1.2.12.1.1.10
dhcpdTableRouter
Specify the Router IP Address for the DHCP server table entry.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.14125.1.2.12.1.1.11
dhcpdTableComments
An optional description regarding the entry of the DHCP server table.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.14125.1.2.12.1.1.12
dhcpdTableActive
The status of the DHCP server table entry.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.14125.1.2.12.1.1.13
dhcpdTableRowStatus
The row status in the DHCP server table entry.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.14125.1.2.12.1.1.14

dhcpClientTable

table
.1.3.6.1.4.1.14125.1.2.12.4 · 1 row entry · 4 columns
Open in standard view
Uses the engenius variant from /opt/observium/mibs/engenius.
Command help
Walk dhcpClientTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ENGENIUS-MESH-MIB' -M '/opt/observium/mibs/engenius:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ENGENIUS-MESH-MIB::dhcpClientTable' 
This is the read-only DHCP client table.
dhcpClientTableEntry row .1.3.6.1.4.1.14125.1.2.12.4.1
Represent the entry in the DHCP client table.
Indexes
Column Syntax OID
dhcpClientTableIndex
Specify the index of the DHCP client table.
Integer32
Constraints:
range: 0-254
 .1.3.6.1.4.1.14125.1.2.12.4.1.1
dhcpClientTableIp
Specify the IP address of the client in the DHCP server.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.14125.1.2.12.4.1.2
dhcpClientTableMac
Specify the MAC address of the client in the DHCP server.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.14125.1.2.12.4.1.3
dhcpClientTableHostname
Specify the Host name of the client in the DHCP server.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.14125.1.2.12.4.1.4

dnsTable

table
.1.3.6.1.4.1.14125.1.2.13.6 · 1 row entry · 6 columns
Open in standard view
Uses the engenius variant from /opt/observium/mibs/engenius.
Command help
Walk dnsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ENGENIUS-MESH-MIB' -M '/opt/observium/mibs/engenius:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ENGENIUS-MESH-MIB::dnsTable' 
This table contains the information of the DNS.
dnsTableEntry row .1.3.6.1.4.1.14125.1.2.13.6.1
Represent the entry in the DNS table.
Indexes
Column Syntax OID
dnsTableIndex
Specify the index of the DNS service table.
Integer32
Constraints:
range: 0-128
 .1.3.6.1.4.1.14125.1.2.13.6.1.1
dnsTableDns
Specify the Hostname/Domain name of the DNS Service table entry.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.14125.1.2.13.6.1.2
dnsTableIpaddress
Specify the reply IP Address of the table entry.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.14125.1.2.13.6.1.3
dnsTableComments
An optional comment associated to entry of the DNS service table.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.14125.1.2.13.6.1.4
dnsTableActive
The status of the DNS table entry.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.14125.1.2.13.6.1.5
dnsTableRowStatus
The row status in the DNS table entry
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.14125.1.2.13.6.1.6

topologyTable

table
.1.3.6.1.4.1.14125.1.2.14.1 · 1 row entry · 5 columns
Open in standard view
Uses the engenius variant from /opt/observium/mibs/engenius.
Command help
Walk topologyTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ENGENIUS-MESH-MIB' -M '/opt/observium/mibs/engenius:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ENGENIUS-MESH-MIB::topologyTable' 
This table contains the list of topology of the node, displaying the relationship between this node and other.
topologyTableEntry row .1.3.6.1.4.1.14125.1.2.14.1.1
Represent the entry in the Topology table.
Indexes
Column Syntax OID
topologyTableIndex
Specify the index of the node Topology table.
Integer32
Constraints:
range: 0-4096
 .1.3.6.1.4.1.14125.1.2.14.1.1.1
topologyTableSource
The source node's IP Address
OctetString
Constraints:
range: 7-17
 .1.3.6.1.4.1.14125.1.2.14.1.1.2
topologyTableDestination
The destination node's IP Address
OctetString
Constraints:
range: 7-17
 .1.3.6.1.4.1.14125.1.2.14.1.1.3
topologyTableLabel
The label of the link between the source node and destination node.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.14125.1.2.14.1.1.4
topologyTableStyle
The style of the link between the source node and destination node.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.14125.1.2.14.1.1.5

firewallTable

table
.1.3.6.1.4.1.14125.1.2.15.2 · 1 row entry · 15 columns
Open in standard view
Uses the engenius variant from /opt/observium/mibs/engenius.
Command help
Walk firewallTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ENGENIUS-MESH-MIB' -M '/opt/observium/mibs/engenius:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ENGENIUS-MESH-MIB::firewallTable' 
This table contains rules of the firewall of the system.
firewallTableEntry row .1.3.6.1.4.1.14125.1.2.15.2.1
Represent the entry in the Firewall table.
Indexes
Column Syntax OID
firewallTableIndex
Specify the index of the firewall table.
Integer32
Constraints:
range: 0-1024
 .1.3.6.1.4.1.14125.1.2.15.2.1.1
firewallTableTarget
Allow or deny the Target.
Enumerationr/w
Enumerated Values:
1allow
2deny
 .1.3.6.1.4.1.14125.1.2.15.2.1.2
firewallTableSrcIface
The source interface name
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.14125.1.2.15.2.1.3
firewallTableDstIface
The destination interface name
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.14125.1.2.15.2.1.4
firewallTableSrcIp
The source IP Address
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.14125.1.2.15.2.1.5
firewallTableSrcMask
The net mask for the source IP Address
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.14125.1.2.15.2.1.6
firewallTableDstIp
The destination IP Address
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.14125.1.2.15.2.1.7
firewallTableDstMask
The net mask for the destination IP Address
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.14125.1.2.15.2.1.8
firewallTableProtocol
The protocol in number
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.14125.1.2.15.2.1.9
firewallTableStartPort
The start port number
Integer32r/w
Constraints:
range: -1-65535
 .1.3.6.1.4.1.14125.1.2.15.2.1.10
firewallTableEndPort
The end port number
Integer32r/w
Constraints:
range: -1-65535
 .1.3.6.1.4.1.14125.1.2.15.2.1.11
firewallTableUserGroup
User group associated with this rule
Integer32r/w
Constraints:
range: -1-999999
 .1.3.6.1.4.1.14125.1.2.15.2.1.12
firewallTableComment
The name for the specified rules
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.14125.1.2.15.2.1.13
firewallTableActive
The status of the firewall table entry.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.14125.1.2.15.2.1.14
firewallTableRowStatus
The row status in the firewall table entry
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.14125.1.2.15.2.1.15

macaccessTable

table
.1.3.6.1.4.1.14125.1.2.16.4 · 1 row entry · 6 columns
Open in standard view
Uses the engenius variant from /opt/observium/mibs/engenius.
Command help
Walk macaccessTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ENGENIUS-MESH-MIB' -M '/opt/observium/mibs/engenius:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ENGENIUS-MESH-MIB::macaccessTable' 
This table display the Mac Access Table.
macaccessTableEntry row .1.3.6.1.4.1.14125.1.2.16.4.1
Represent the entry in the Mac Access table.
Indexes
Column Syntax OID
macaccessTableIndex
Specify the index of the MAC Access table.
Integer32
Constraints:
range: 0-1024
 .1.3.6.1.4.1.14125.1.2.16.4.1.1
macaccessTableMac
The MAC address to be filtered.
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.14125.1.2.16.4.1.2
macaccessTableType
The type of the access for the MAC access table entry.
Enumerationr/w
Enumerated Values:
1allow
2deny
 .1.3.6.1.4.1.14125.1.2.16.4.1.3
macaccessTableComment
An optional comment associated to entry of the MAC Access table.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.14125.1.2.16.4.1.4
macaccessTableActive
The status of the MAC access table entry.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.14125.1.2.16.4.1.5
macaccessTableRowStatus
The row status in the MAC Access table entry
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.14125.1.2.16.4.1.6

macActiveTable

table
.1.3.6.1.4.1.14125.1.2.16.5 · 1 row entry · 3 columns
Open in standard view
Uses the engenius variant from /opt/observium/mibs/engenius.
Command help
Walk macActiveTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ENGENIUS-MESH-MIB' -M '/opt/observium/mibs/engenius:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ENGENIUS-MESH-MIB::macActiveTable' 
This is the read-only Active MAC table.
macActiveTableEntry row .1.3.6.1.4.1.14125.1.2.16.5.1
Represent the entry in the Active MAC table.
Indexes
Column Syntax OID
macActiveTableIndex
Specify the index of the Active MAC table.
Integer32
Constraints:
range: 0-1024
 .1.3.6.1.4.1.14125.1.2.16.5.1.1
macActiveTableMac
Specify the MAC address of the active user Active MAC table.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.14125.1.2.16.5.1.2
macActiveTableIp
Specify the MAC address of the active user Active MAC table.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.14125.1.2.16.5.1.3

natTable

table
.1.3.6.1.4.1.14125.1.2.17.2 · 1 row entry · 7 columns
Open in standard view
Uses the engenius variant from /opt/observium/mibs/engenius.
Command help
Walk natTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ENGENIUS-MESH-MIB' -M '/opt/observium/mibs/engenius:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ENGENIUS-MESH-MIB::natTable' 
This table display the NAT Table.
natTableEntry row .1.3.6.1.4.1.14125.1.2.17.2.1
Represent the entry in the NAT table.
Indexes
Column Syntax OID
natTableIndex
Specify the index of the NAT table.
Integer32
Constraints:
range: 0-256
 .1.3.6.1.4.1.14125.1.2.17.2.1.1
natTableProtocol
Define the type of protocol of the NAT Table entry
Enumerationr/w
Enumerated Values:
1tcp
2udp
3both
 .1.3.6.1.4.1.14125.1.2.17.2.1.2
natTablePort
Define the port number of the NAT Table entry
Integer32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.14125.1.2.17.2.1.3
natTableIp
Define the IP Address of the NAT Table entry
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.14125.1.2.17.2.1.4
natTableComment
An optional comment associated to entry of the NAT table.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.14125.1.2.17.2.1.5
natTableActive
The status of the NAT table entry.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.14125.1.2.17.2.1.6
natTableRowStatus
The row status in the NAT table entry
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.14125.1.2.17.2.1.7

olsrGatewayTable

table
.1.3.6.1.4.1.14125.1.2.18.1 · 1 row entry · 6 columns
Open in standard view
Uses the engenius variant from /opt/observium/mibs/engenius.
Command help
Walk olsrGatewayTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ENGENIUS-MESH-MIB' -M '/opt/observium/mibs/engenius:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ENGENIUS-MESH-MIB::olsrGatewayTable' 
This table contains the OLSR local network gateway.
olsrGatewayTableEntry row .1.3.6.1.4.1.14125.1.2.18.1.1
Represent the entry in the OLSR Gateway table.
Indexes
Column Syntax OID
olsrGatewayTableIndex
Specify the index of the OLSR gateway table.
Integer32
Constraints:
range: 0-10
 .1.3.6.1.4.1.14125.1.2.18.1.1.1
olsrGatewayTableSubnet
The Subnet Address of the OLSR gateway entry.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.14125.1.2.18.1.1.2
olsrGatewayTableNetmask
The netmask for the subnet above.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.14125.1.2.18.1.1.3
olsrGatewayTableComments
An optional description regarding the entry of the Olsr Gateway table.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.14125.1.2.18.1.1.4
olsrGatewayTableActive
The status of the OLSR Gateway table entry.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.14125.1.2.18.1.1.5
olsrGatewayTableRowStatus
The row status in the OLSR Gateway table entry.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.14125.1.2.18.1.1.6

shapingTable

table
.1.3.6.1.4.1.14125.1.2.19.10 · 1 row entry · 9 columns
Open in standard view
Uses the engenius variant from /opt/observium/mibs/engenius.
Command help
Walk shapingTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ENGENIUS-MESH-MIB' -M '/opt/observium/mibs/engenius:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ENGENIUS-MESH-MIB::shapingTable' 
This table display the traffic shaping table.
shapingTableEntry row .1.3.6.1.4.1.14125.1.2.19.10.1
Represent the entry in the traffic shaping table.
Indexes
Column Syntax OID
shapingTableIndex
Specify the index of the traffic shaping table.
Integer32
Constraints:
range: 0-1024
 .1.3.6.1.4.1.14125.1.2.19.10.1.1
shapingTableProtocol
Define the type of protocol of the traffic shaping Table entry
Enumerationr/w
Enumerated Values:
1tcp
2udp
3both
 .1.3.6.1.4.1.14125.1.2.19.10.1.2
shapingTablePort
Define the port number of the traffic shaping Table entry
Integer32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.14125.1.2.19.10.1.3
shapingTableMinsize
Define the minimum packet size of the traffic shaping Table entry
Integer32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.14125.1.2.19.10.1.4
shapingTableMaxsize
Define the maximum packet size of the traffic shaping Table entry
Integer32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.14125.1.2.19.10.1.5
shapingTablePriority
Define the type of priority of the traffic shaping Table entry
Enumerationr/w
Enumerated Values:
1background
2video
3voice
4besteffort
 .1.3.6.1.4.1.14125.1.2.19.10.1.6
shapingTableComment
An optional comment associated to entry of the traffiic shaping table.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.14125.1.2.19.10.1.7
shapingTableActive
The status of the traffic shaping table entry.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.14125.1.2.19.10.1.8
shapingTableRowStatus
The row status in the traffic shaping table entry
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.14125.1.2.19.10.1.9

pptpTable

table
.1.3.6.1.4.1.14125.1.2.21.2 · 1 row entry · 7 columns
Open in standard view
Uses the engenius variant from /opt/observium/mibs/engenius.
Command help
Walk pptpTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ENGENIUS-MESH-MIB' -M '/opt/observium/mibs/engenius:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ENGENIUS-MESH-MIB::pptpTable' 
This table display the PPTP server Table.
pptpTableEntry row .1.3.6.1.4.1.14125.1.2.21.2.1
Represent the entry in the PPTP server table.
Indexes
Column Syntax OID
pptpTableIndex
Specify the index of the PPTP server table.
Integer32
Constraints:
range: 0-10
 .1.3.6.1.4.1.14125.1.2.21.2.1.1
pptpTableUsername
The username of the PPTP server user.
OctetStringr/w
Constraints:
range: 1-32
 .1.3.6.1.4.1.14125.1.2.21.2.1.2
pptpTablePassword
The password for the username of the PPTP server user.
OctetStringr/w
Constraints:
range: 1-32
 .1.3.6.1.4.1.14125.1.2.21.2.1.3
pptpTableIp
Define the IP Address of the PPTP server Table entry
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.14125.1.2.21.2.1.4
pptpTableComment
An optional comment associated to entry of the PPTP Server users table.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.14125.1.2.21.2.1.5
pptpTableActive
The status of the PPTP Server users table entry.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.14125.1.2.21.2.1.6
pptpTableRowStatus
The row status in the PPTP Server users table entry
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.14125.1.2.21.2.1.7

radiusclientTable

table
.1.3.6.1.4.1.14125.1.2.24.7 · 1 row entry · 8 columns
Open in standard view
Uses the engenius variant from /opt/observium/mibs/engenius.
Command help
Walk radiusclientTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ENGENIUS-MESH-MIB' -M '/opt/observium/mibs/engenius:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ENGENIUS-MESH-MIB::radiusclientTable' 
This table display the Servers entry of the RADIUS client.
radiusclientTableEntry row .1.3.6.1.4.1.14125.1.2.24.7.1
Represent the entry in the RADIUS client table.
Indexes
Column Syntax OID
radiusclientTableIndex
Specify the index of the RADIUS client table.
Integer32
Constraints:
range: 0-8
 .1.3.6.1.4.1.14125.1.2.24.7.1.1
radiusclientTableServername
The server name of the RADIUS client.
OctetStringr/w
Constraints:
range: 1-32
 .1.3.6.1.4.1.14125.1.2.24.7.1.2
radiusclientTableServertype
The server type: authenticate or accounting.
Enumerationr/w
Enumerated Values:
1authenticate
2accounting
 .1.3.6.1.4.1.14125.1.2.24.7.1.3
radiusclientTableServerport
The server port of the RADIUS client.
Integer32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.14125.1.2.24.7.1.4
radiusclientTableServersecret
Share secret of the radius client.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.14125.1.2.24.7.1.5
radiusclientTableComment
An optional comment associated to entry of the RADIUS client table.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.14125.1.2.24.7.1.6
radiusclientTableActive
The status of the RADIUS client table entry.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.14125.1.2.24.7.1.7
radiusclientTableRowStatus
The row status in the RADIUS client table entry
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.14125.1.2.24.7.1.8

httpdTable

table
.1.3.6.1.4.1.14125.1.2.25.6 · 1 row entry · 8 columns
Open in standard view
Uses the engenius variant from /opt/observium/mibs/engenius.
Command help
Walk httpdTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ENGENIUS-MESH-MIB' -M '/opt/observium/mibs/engenius:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ENGENIUS-MESH-MIB::httpdTable' 
This table display the access control of the HTTPD Table.
httpdTableEntry row .1.3.6.1.4.1.14125.1.2.25.6.1
Represent the entry in the HTTPD table.
Indexes
Column Syntax OID
httpdTableIndex
Specify the index of the HTTPD table.
Integer32
Constraints:
range: 0-64
 .1.3.6.1.4.1.14125.1.2.25.6.1.1
httpdTableDevice
Allow access from device.
OctetStringr/w
Constraints:
range: 1-32
 .1.3.6.1.4.1.14125.1.2.25.6.1.2
httpdTableSubnet
Allow access from network
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.14125.1.2.25.6.1.3
httpdTableNetmask
Netmask for the subnet
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.14125.1.2.25.6.1.4
httpdTableDevnet
Define the type HTTPD Table entry: Use device or network
Enumerationr/w
Enumerated Values:
1device
2network
 .1.3.6.1.4.1.14125.1.2.25.6.1.5
httpdTableComment
An optional comment associated to entry of the HTTPD table.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.14125.1.2.25.6.1.6
httpdTableActive
The status of the HTTPD table entry.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.14125.1.2.25.6.1.7
httpdTableRowStatus
The row status in the HTTPD table entry
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.14125.1.2.25.6.1.8

snmpdTable

table
.1.3.6.1.4.1.14125.1.2.26.11 · 1 row entry · 8 columns
Open in standard view
Uses the engenius variant from /opt/observium/mibs/engenius.
Command help
Walk snmpdTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ENGENIUS-MESH-MIB' -M '/opt/observium/mibs/engenius:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ENGENIUS-MESH-MIB::snmpdTable' 
This table display the access control of the SNMPD Table.
snmpdTableEntry row .1.3.6.1.4.1.14125.1.2.26.11.1
Represent the entry in the SNMPD table.
Indexes
Column Syntax OID
snmpdTableIndex
Specify the index of the SNMPD table.
Integer32
Constraints:
range: 0-64
 .1.3.6.1.4.1.14125.1.2.26.11.1.1
snmpdTableDevice
Allow access from device.
OctetStringr/w
Constraints:
range: 1-32
 .1.3.6.1.4.1.14125.1.2.26.11.1.2
snmpdTableSubnet
Allow access from network
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.14125.1.2.26.11.1.3
snmpdTableNetmask
Netmask for the subnet
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.14125.1.2.26.11.1.4
snmpdTableDevnet
Define the type SNMPD Table entry: Use device or network
Enumerationr/w
Enumerated Values:
1device
2network
 .1.3.6.1.4.1.14125.1.2.26.11.1.5
snmpdTableComment
An optional comment associated to entry of the SNMPD table.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.14125.1.2.26.11.1.6
snmpdTableActive
The status of the SNMPD table entry.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.14125.1.2.26.11.1.7
snmpdTableRowStatus
The row status in the SNMPD table entry
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.14125.1.2.26.11.1.8

trapTable

table
.1.3.6.1.4.1.14125.1.2.27.10 · 1 row entry · 10 columns
Open in standard view
Uses the engenius variant from /opt/observium/mibs/engenius.
Command help
Walk trapTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ENGENIUS-MESH-MIB' -M '/opt/observium/mibs/engenius:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ENGENIUS-MESH-MIB::trapTable' 
This table display the SNMP Trap Host Table.
trapTableEntry row .1.3.6.1.4.1.14125.1.2.27.10.1
Represent the entry in the SNMP Trap Host table.
Indexes
Column Syntax OID
trapTableIndex
Specify the index of the SNMP Trap Host Table.
Integer32
Constraints:
range: 0-8
 .1.3.6.1.4.1.14125.1.2.27.10.1.1
trapTableIp
The destination IP Address of the SNMP Trap Host Table entry
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.14125.1.2.27.10.1.2
trapTableCommunity
The community of the remote SNMP Host.
OctetStringr/w
Constraints:
range: 0-0
range: 4-32
 .1.3.6.1.4.1.14125.1.2.27.10.1.3
trapTableUsername
The username of the SNMP v3 trap manager.
OctetStringr/w
Constraints:
range: 0-0
range: 8-50
 .1.3.6.1.4.1.14125.1.2.27.10.1.4
trapTableAuthpasswd
The authentication password of the SNMP v3 trap manager.
OctetStringr/w
Constraints:
range: 0-0
range: 8-50
 .1.3.6.1.4.1.14125.1.2.27.10.1.5
trapTablePrivpasswd
The privacy password of the SNMP v3 trap manager.
OctetStringr/w
Constraints:
range: 0-0
range: 8-50
 .1.3.6.1.4.1.14125.1.2.27.10.1.6
trapTableVersion
The SNMP version used by the remote trap manager.
Enumerationr/w
Enumerated Values:
1version2c
2version3
 .1.3.6.1.4.1.14125.1.2.27.10.1.7
trapTableComment
An optional comment associated to entry of the SNMP Trap Host table.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.14125.1.2.27.10.1.8
trapTableActive
The status of the SNMP Trap Host table entry.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.14125.1.2.27.10.1.9
trapTableRowStatus
The row status in the SNMP Trap Host table entry
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.14125.1.2.27.10.1.10

signallevelTable

table
.1.3.6.1.4.1.14125.1.2.30.2 · 1 row entry · 4 columns
Open in standard view
Uses the engenius variant from /opt/observium/mibs/engenius.
Command help
Walk signallevelTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ENGENIUS-MESH-MIB' -M '/opt/observium/mibs/engenius:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ENGENIUS-MESH-MIB::signallevelTable' 
This table contains the list of signal level between the node and its neighbour nodes.
signallevelTableEntry row .1.3.6.1.4.1.14125.1.2.30.2.1
Represent the entry in the Signal Level table.
Indexes
Column Syntax OID
signallevelTableIndex
Specify the index of the node Signal Level table.
Integer32
Constraints:
range: 0-32
 .1.3.6.1.4.1.14125.1.2.30.2.1.1
signallevelTableSource
The source node's IP Address
OctetString .1.3.6.1.4.1.14125.1.2.30.2.1.2
signallevelTableDestination
The destination node's IP Address
OctetString .1.3.6.1.4.1.14125.1.2.30.2.1.3
signallevelTableRssi
The singal level between the source node and destination node in RSSI.
OctetString .1.3.6.1.4.1.14125.1.2.30.2.1.4

clientInfoTable

table
.1.3.6.1.4.1.14125.1.2.30.3 · 1 row entry · 7 columns
Open in standard view
Uses the engenius variant from /opt/observium/mibs/engenius.
Command help
Walk clientInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ENGENIUS-MESH-MIB' -M '/opt/observium/mibs/engenius:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ENGENIUS-MESH-MIB::clientInfoTable' 
This table contains the list of clients info of the nodes.
clientInfoTableEntry row .1.3.6.1.4.1.14125.1.2.30.3.1
Represent the entry in the Client Info table.
Indexes
Column Syntax OID
clientInfoTableIndex
Specify the index of the node Client Info table.
Integer32
Constraints:
range: 0-4096
 .1.3.6.1.4.1.14125.1.2.30.3.1.1
clientInfoTableEssid
The ESSID of the AP
OctetString .1.3.6.1.4.1.14125.1.2.30.3.1.2
clientInfoTableMac
The MAC Address of the client
OctetString .1.3.6.1.4.1.14125.1.2.30.3.1.3
clientInfoTableChannel
The channel of the Client
OctetString .1.3.6.1.4.1.14125.1.2.30.3.1.4
clientInfoTableRate
The speed rate of the client in kbps
OctetString .1.3.6.1.4.1.14125.1.2.30.3.1.5
clientInfoTableRssi
The singal level between the client and node in RSSI.
OctetString .1.3.6.1.4.1.14125.1.2.30.3.1.6
clientInfoTableIdletime
The idle timeout in second of the client.
OctetString .1.3.6.1.4.1.14125.1.2.30.3.1.7

clientStatTable

table
.1.3.6.1.4.1.14125.1.2.30.4 · 1 row entry · 8 columns
Open in standard view
Uses the engenius variant from /opt/observium/mibs/engenius.
Command help
Walk clientStatTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ENGENIUS-MESH-MIB' -M '/opt/observium/mibs/engenius:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ENGENIUS-MESH-MIB::clientStatTable' 
This table contains the details of the clients' statistic.
clientStatTableEntry row .1.3.6.1.4.1.14125.1.2.30.4.1
Represent the entry in the Client Stat table.
Indexes
Column Syntax OID
clientStatTableIndex
Specify the index of the node Client Statistic table.
Integer32
Constraints:
range: 0-512
 .1.3.6.1.4.1.14125.1.2.30.4.1.1
clientStatTableIp
The IP Address of the clinet
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.14125.1.2.30.4.1.2
clientStatTableMac
The MAC Address of the client
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.14125.1.2.30.4.1.3
clientStatTableTx
The trasmit of the client in bytes count
OctetString .1.3.6.1.4.1.14125.1.2.30.4.1.4
clientStatTableRx
The receive of the client in bytes count
OctetString .1.3.6.1.4.1.14125.1.2.30.4.1.5
clientStatTableTxPkt
The transmit of the client in packets count..
OctetString .1.3.6.1.4.1.14125.1.2.30.4.1.6
clientStatTableRxPkt
The receive of the client in packets count..
OctetString .1.3.6.1.4.1.14125.1.2.30.4.1.7
clientStatTableOnlinetime
The Online time of the client in 'HH:MM:SS'.
OctetString .1.3.6.1.4.1.14125.1.2.30.4.1.8

interfacesTable

table
.1.3.6.1.4.1.14125.1.2.34.1 · 1 row entry · 3 columns
Open in standard view
Uses the engenius variant from /opt/observium/mibs/engenius.
Command help
Walk interfacesTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ENGENIUS-MESH-MIB' -M '/opt/observium/mibs/engenius:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ENGENIUS-MESH-MIB::interfacesTable' 
This table contains the list of interfaces name of the system.
interfacesTableEntry row .1.3.6.1.4.1.14125.1.2.34.1.1
Represent the entry in the Interfaces table.
Indexes
Column Syntax OID
interfacesTableIndex
Specify the index of the interfaces table.
Integer32
Constraints:
range: 0-64
 .1.3.6.1.4.1.14125.1.2.34.1.1.1
interfacesTableDev
The name of the interfaces
OctetString .1.3.6.1.4.1.14125.1.2.34.1.1.2
interfacesTableLabel
The label of the interfaces
OctetString .1.3.6.1.4.1.14125.1.2.34.1.1.3

mlrdTable

table
.1.3.6.1.4.1.14125.1.2.35.8 · 1 row entry · 8 columns
Open in standard view
Uses the engenius variant from /opt/observium/mibs/engenius.
Command help
Walk mlrdTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ENGENIUS-MESH-MIB' -M '/opt/observium/mibs/engenius:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ENGENIUS-MESH-MIB::mlrdTable' 
The MLRD Static entry table.
mlrdTableEntry row .1.3.6.1.4.1.14125.1.2.35.8.1
Represent the entry in the MLRD static entry table.
Indexes
Column Syntax OID
mlrdTableIndex
Specify the index of the MLRD static entry Table.
Integer32
Constraints:
range: 0-8
 .1.3.6.1.4.1.14125.1.2.35.8.1.1
mlrdTableMac
The static station Mac Address.
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.14125.1.2.35.8.1.2
mlrdTableIp
The station assigned IP Address.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.14125.1.2.35.8.1.3
mlrdTableParent
The station assigned parent.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.14125.1.2.35.8.1.4
mlrdTableDefaultRoute
The station's default route.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.14125.1.2.35.8.1.5
mlrdTableComment
An optional comment associated to entry of the MLRD static entry table.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.14125.1.2.35.8.1.6
mlrdTableActive
The status of the MLRD static table entry.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.14125.1.2.35.8.1.7
mlrdTableRowStatus
The row status in the MLRD static entry table row
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.14125.1.2.35.8.1.8

wmeTable

table
.1.3.6.1.4.1.14125.1.2.40.1 · 1 row entry · 45 columns
Open in standard view
Uses the engenius variant from /opt/observium/mibs/engenius.
Command help
Walk wmeTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ENGENIUS-MESH-MIB' -M '/opt/observium/mibs/engenius:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ENGENIUS-MESH-MIB::wmeTable' 
The Wireless Multimedia Extension table.
wmeTableEntry row .1.3.6.1.4.1.14125.1.2.40.1.1
Represent the entry in the WME table.
Indexes
Column Syntax OID
wmeTableIndex
Specify the index of the WME Table.
Integer32
Constraints:
range: 0-16
 .1.3.6.1.4.1.14125.1.2.40.1.1.1
wmeTableName
The interface name.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.14125.1.2.40.1.1.2
wmeTableCwminBe
CWMIN parameter for Best effort class
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.14125.1.2.40.1.1.3
wmeTableCwminBk
CWMIN parameter for background class
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.14125.1.2.40.1.1.4
wmeTableCwminVi
CWMIN parameter for Video class
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.14125.1.2.40.1.1.5
wmeTableCwminVo
CWMIN parameter for Voice class
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.14125.1.2.40.1.1.6
wmeTableBssCwminBe
BSS_CWMIN parameter for Best effort class
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.14125.1.2.40.1.1.7
wmeTableBssCwminBk
BSS_CWMIN parameter for background class
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.14125.1.2.40.1.1.8
wmeTableBssCwminVi
BSS_CWMIN parameter for Video class
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.14125.1.2.40.1.1.9
wmeTableBssCwminVo
BSS_CWMIN parameter for Voice class
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.14125.1.2.40.1.1.10
wmeTableCwmaxBe
CWMAX parameter for Best effort class
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.14125.1.2.40.1.1.11
wmeTableCwmaxBk
CWMAX parameter for background class
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.14125.1.2.40.1.1.12
wmeTableCwmaxVi
CWMAX parameter for Video class
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.14125.1.2.40.1.1.13
wmeTableCwmaxVo
CWMAX parameter for Voice class
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.14125.1.2.40.1.1.14
wmeTableBssCwmaxBe
BSS_CWMAX parameter for Best effort class
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.14125.1.2.40.1.1.15
wmeTableBssCwmaxBk
BSS_CWMAX parameter for background class
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.14125.1.2.40.1.1.16
wmeTableBssCwmaxVi
BSS_CWMAX parameter for Video class
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.14125.1.2.40.1.1.17
wmeTableBssCwmaxVo
BSS_CWMAX parameter for Voice class
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.14125.1.2.40.1.1.18
wmeTableAifsnBe
AIFSN parameter for Best effort class
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.14125.1.2.40.1.1.19
wmeTableAifsnBk
AIFSN parameter for background class
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.14125.1.2.40.1.1.20
wmeTableAifsnVi
AIFSN parameter for Video class
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.14125.1.2.40.1.1.21
wmeTableAifsnVo
AIFSN parameter for Voice class
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.14125.1.2.40.1.1.22
wmeTableBssAifsnBe
BSS_AIFSN parameter for Best effort class
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.14125.1.2.40.1.1.23
wmeTableBssAifsnBk
BSS_AIFSN parameter for background class
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.14125.1.2.40.1.1.24
wmeTableBssAifsnVi
BSS_AIFSN parameter for Video class
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.14125.1.2.40.1.1.25
wmeTableBssAifsnVo
BSS_AIFSN parameter for Voice class
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.14125.1.2.40.1.1.26
wmeTableTxoplimitBe
TXOPLIMIT parameter for Best effort class (in miliseconds)
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.14125.1.2.40.1.1.27
wmeTableTxoplimitBk
TXOPLIMIT parameter for Background class (in miliseconds)
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.14125.1.2.40.1.1.28
wmeTableTxoplimitVi
TXOPLIMIT parameter for Video class (in miliseconds)
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.14125.1.2.40.1.1.29
wmeTableTxoplimitVo
TXOPLIMIT parameter for Voice class (in miliseconds)
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.14125.1.2.40.1.1.30
wmeTableBssTxoplimitBe
BSS_TXOPLIMIT parameter for Best effort class (in miliseconds)
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.14125.1.2.40.1.1.31
wmeTableBssTxoplimitBk
BSS_TXOPLIMIT parameter for Background class (in miliseconds)
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.14125.1.2.40.1.1.32
wmeTableBssTxoplimitVi
BSS_TXOPLIMIT parameter for Video class (in miliseconds)
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.14125.1.2.40.1.1.33
wmeTableBssTxoplimitVo
BSS_TXOPLIMIT parameter for Voice class (in miliseconds)
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.14125.1.2.40.1.1.34
wmeTableAcmBe
Enable / Disable Admission Control for Best effort class.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.14125.1.2.40.1.1.35
wmeTableAcmBk
Enable / Disable Admission Control for Background class.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.14125.1.2.40.1.1.36
wmeTableAcmVi
Enable / Disable Admission Control for Video class.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.14125.1.2.40.1.1.37
wmeTableAcmVo
Enable / Disable Admission Control for Voice class.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.14125.1.2.40.1.1.38
wmeTableNoackpolicyBe
Enable / Disable support for No-ack for Best effort class.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.14125.1.2.40.1.1.39
wmeTableNoackpolicyBk
Enable / Disable support for No-ack for Background class.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.14125.1.2.40.1.1.40
wmeTableNoackpolicyVi
Enable / Disable support for No-ack for Video class.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.14125.1.2.40.1.1.41
wmeTableNoackpolicyVo
Enable / Disable support for No-ack for Voice class.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.14125.1.2.40.1.1.42
wmeTableComment
An optional comment associated to the WME table.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.14125.1.2.40.1.1.43
wmeTableActive
The status of the WME table entry.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.14125.1.2.40.1.1.44
wmeTableRowStatus
The row status in the WME table row
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.14125.1.2.40.1.1.45

nmsAddressTable

table
.1.3.6.1.4.1.14125.1.2.42.1 · 1 row entry · 7 columns
Open in standard view
Uses the engenius variant from /opt/observium/mibs/engenius.
Command help
Walk nmsAddressTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ENGENIUS-MESH-MIB' -M '/opt/observium/mibs/engenius:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ENGENIUS-MESH-MIB::nmsAddressTable' 
This is the list of NMS servers that will be updated by the AP periodically.
nmsAddressTableEntry row .1.3.6.1.4.1.14125.1.2.42.1.1
Represent the entry in the NMS Address table.
Indexes
Column Syntax OID
nmsAddressTableIndex
Specify the index of the NMS Address table.
Integer32
Constraints:
range: 0-128
 .1.3.6.1.4.1.14125.1.2.42.1.1.1
nmsAddressTableAddress
The DNS/IP Address of the NMS server.
OctetStringr/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.14125.1.2.42.1.1.2
nmsAddressTablePort
The NMS server port.
Integer32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.14125.1.2.42.1.1.3
nmsAddressTableInterval
The AP update interval of that particular NMS server.
Integer32r/w
Constraints:
range: 60-300000
 .1.3.6.1.4.1.14125.1.2.42.1.1.4
nmsAddressTableComment
An optional description regarding the entry of the NMS Address table.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.14125.1.2.42.1.1.5
nmsAddressTableActive
The status of the NMS Address table entry.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.14125.1.2.42.1.1.6
nmsAddressTableRowStatus
The row status in the NMS Address table entry.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.14125.1.2.42.1.1.7

userDbTable

table
.1.3.6.1.4.1.14125.1.2.43.7 · 1 row entry · 5 columns
Open in standard view
Uses the engenius variant from /opt/observium/mibs/engenius.
Command help
Walk userDbTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ENGENIUS-MESH-MIB' -M '/opt/observium/mibs/engenius:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ENGENIUS-MESH-MIB::userDbTable' 
This table contains the local user database.
userDbTableEntry row .1.3.6.1.4.1.14125.1.2.43.7.1
Represent the entry in the local user database table.
Indexes
Column Syntax OID
userDbTableIndex
Specify the index of the user group table.
Integer32
Constraints:
range: 0-128
 .1.3.6.1.4.1.14125.1.2.43.7.1.1
userDbTableName
The name of the user
OctetString
Constraints:
range: 1-32
 .1.3.6.1.4.1.14125.1.2.43.7.1.2
userDbTablePassword
The login password for the username
OctetString
Constraints:
range: 1-32
 .1.3.6.1.4.1.14125.1.2.43.7.1.3
userDbTableGid
The group id used for the username
Integer32
Constraints:
range: -1-999999
 .1.3.6.1.4.1.14125.1.2.43.7.1.4
userDbTableStatus
The default download bandwidth of the entry
Enumeration
Enumerated Values:
1enable
2loggedin
3idle
4expired
 .1.3.6.1.4.1.14125.1.2.43.7.1.5

userGroupTable

table
.1.3.6.1.4.1.14125.1.2.44.13 · 1 row entry · 10 columns
Open in standard view
Uses the engenius variant from /opt/observium/mibs/engenius.
Command help
Walk userGroupTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ENGENIUS-MESH-MIB' -M '/opt/observium/mibs/engenius:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ENGENIUS-MESH-MIB::userGroupTable' 
This table contains the local user group.
userGroupTableEntry row .1.3.6.1.4.1.14125.1.2.44.13.1
Represent the entry in the user group table.
Indexes
Column Syntax OID
userGroupTableIndex
Specify the index of the user group table.
Integer32
Constraints:
range: 0-16
 .1.3.6.1.4.1.14125.1.2.44.13.1.1
userGroupTableGid
The group id of the entry
Integer32
Constraints:
range: 0-999999
 .1.3.6.1.4.1.14125.1.2.44.13.1.2
userGroupTableName
The group name of the entry
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.14125.1.2.44.13.1.3
userGroupTableLanguage
The group's default language of the entry
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.14125.1.2.44.13.1.4
userGroupTableUpload
The default upload bandwidth of the entry
Integer32
Constraints:
range: 32-300000
 .1.3.6.1.4.1.14125.1.2.44.13.1.5
userGroupTableDownload
The default download bandwidth of the entry
Integer32
Constraints:
range: 32-300000
 .1.3.6.1.4.1.14125.1.2.44.13.1.6
userGroupTableIdleTimeout
The default idle timeout of the entry
Integer32
Constraints:
range: 0-300000
 .1.3.6.1.4.1.14125.1.2.44.13.1.7
userGroupTableSessTimeout
The default session timeout of the entry
Integer32
Constraints:
range: 0-300000
 .1.3.6.1.4.1.14125.1.2.44.13.1.8
userGroupTableUrl
The redirect URL for the entry
OctetString
Constraints:
range: 0-512
 .1.3.6.1.4.1.14125.1.2.44.13.1.9
userGroupTableComment
The group's optional comment
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.14125.1.2.44.13.1.10

dhcrelayTable

table
.1.3.6.1.4.1.14125.1.2.46.5 · 1 row entry · 6 columns
Open in standard view
Uses the engenius variant from /opt/observium/mibs/engenius.
Command help
Walk dhcrelayTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ENGENIUS-MESH-MIB' -M '/opt/observium/mibs/engenius:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ENGENIUS-MESH-MIB::dhcrelayTable' 
This is the DHCP Relay table.
dhcrelayTableEntry row .1.3.6.1.4.1.14125.1.2.46.5.1
Represent the entry in the DHCP Relay table.
Indexes
Column Syntax OID
dhcrelayTableIndex
Specify the index of the DHCP Relay table.
Integer32
Constraints:
range: 0-32
 .1.3.6.1.4.1.14125.1.2.46.5.1.1
dhcrelayTableType
The type of this DHCP Relay table entry.
Enumerationr/w
Enumerated Values:
1server
2interface
 .1.3.6.1.4.1.14125.1.2.46.5.1.2
dhcrelayTableExtra
Extra information for the type, eg for server(1)-ip address, or interface(2)-interface name.
OctetStringr/w
Constraints:
range: 1-32
 .1.3.6.1.4.1.14125.1.2.46.5.1.3
dhcrelayTableComments
An optional description regarding the entry of the DHCP Relay table.
OctetStringr/w
Constraints:
range: 1-32
 .1.3.6.1.4.1.14125.1.2.46.5.1.4
dhcrelayTableActive
The status of the DHCP Relay table entry.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.14125.1.2.46.5.1.5
dhcrelayTableRowStatus
The row status in the DHCP Relay table entry.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.14125.1.2.46.5.1.6

ebTable

table
.1.3.6.1.4.1.14125.1.2.49.2 · 1 row entry · 21 columns
Open in standard view
Uses the engenius variant from /opt/observium/mibs/engenius.
Command help
Walk ebTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ENGENIUS-MESH-MIB' -M '/opt/observium/mibs/engenius:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ENGENIUS-MESH-MIB::ebTable' 
This is the Ebtable rules.
ebTableEntry row .1.3.6.1.4.1.14125.1.2.49.2.1
Represent the entry in the ebtables.
Indexes
Column Syntax OID
ebTableIndex
Specify the index of the ebtables.
Integer32
Constraints:
range: 0-64
 .1.3.6.1.4.1.14125.1.2.49.2.1.1
ebTableTarget
Select the type of this rule: allow or deny .
Enumerationr/w
Enumerated Values:
1allow
2deny
 .1.3.6.1.4.1.14125.1.2.49.2.1.2
ebTableSrcIface
Source Interface
OctetStringr/w
Constraints:
range: 1-32
 .1.3.6.1.4.1.14125.1.2.49.2.1.3
ebTableDstIface
Destination Interface
OctetStringr/w
Constraints:
range: 1-32
 .1.3.6.1.4.1.14125.1.2.49.2.1.4
ebTableMatchMac
Enable or disable the MAC matching.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.14125.1.2.49.2.1.5
ebTableSrcMac
Source MAC Address
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.14125.1.2.49.2.1.6
ebTableDstMac
Destination MAC Address
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.14125.1.2.49.2.1.7
ebTableProtocol
The protocol type.
Enumerationr/w
Enumerated Values:
1ipv4
2arp
3e802dot1q
4ppp
 .1.3.6.1.4.1.14125.1.2.49.2.1.8
ebTableSrcIp
Source IP Address
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.14125.1.2.49.2.1.9
ebTableSrcMask
Source netmask
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.14125.1.2.49.2.1.10
ebTableDstIp
Destination IP Address
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.14125.1.2.49.2.1.11
ebTableDstMask
Destination netmask
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.14125.1.2.49.2.1.12
ebTableIpProt
The protocol type.
Enumerationr/w
Enumerated Values:
1icmp
6tcp
17udp
 .1.3.6.1.4.1.14125.1.2.49.2.1.13
ebTableSrcPortStart
Start of Source port
Integer32r/w
Constraints:
range: -1-65536
 .1.3.6.1.4.1.14125.1.2.49.2.1.14
ebTableSrcPortEnd
End of Source port
Integer32r/w
Constraints:
range: -1-65536
 .1.3.6.1.4.1.14125.1.2.49.2.1.15
ebTableDstPortStart
Start of Destination port
Integer32r/w
Constraints:
range: -1-65536
 .1.3.6.1.4.1.14125.1.2.49.2.1.16
ebTableDstPortEnd
End of Destination port
Integer32r/w
Constraints:
range: -1-65536
 .1.3.6.1.4.1.14125.1.2.49.2.1.17
ebTableVlanid
VLAN ID
Integer32r/w
Constraints:
range: 0-4096
 .1.3.6.1.4.1.14125.1.2.49.2.1.18
ebTableComments
Optional comment
OctetStringr/w
Constraints:
range: 1-32
 .1.3.6.1.4.1.14125.1.2.49.2.1.19
ebTableActive
The status of the ebtables entry.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.14125.1.2.49.2.1.20
ebTableRowStatus
The row status in the ebtable entry.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.14125.1.2.49.2.1.21