EMD-MIB Table View

A list of externalSensor configuration entries. The number of
entries is given by the value of externalSensorCount for the EMD.

externalSensorConfigurationEntry row .1.3.6.1.4.1.13742.8.1.2.1.1

An entry containing parameters for an external sensor.

Indexes

sensorID

Column	Syntax	OID
sensorID A unique value for each sensor. Its value ranges between 1 and the value of externalSensorCount.	Integer32 Constraints: range: 1-256	.1.3.6.1.4.1.13742.8.1.2.1.1.1
externalSensorType The type of sensor.	SensorTypeEnumeration Type Values: 1 rmsCurrent 2 peakCurrent 3 unbalancedCurrent 4 rmsVoltage 5 activePower 6 apparentPower 7 powerFactor 8 activeEnergy 9 apparentEnergy 10 temperature 11 humidity 12 airFlow 13 airPressure 14 onOff 15 trip 16 vibration 17 waterDetection 18 smokeDetection 19 binary 20 contact 21 fanSpeed 28 absoluteHumidity 30 other 31 none 42 illuminance 43 doorContact 44 tamperDetection 45 motionDetection	.1.3.6.1.4.1.13742.8.1.2.1.1.2
externalSensorSerialNumber The sensor serial number.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.13742.8.1.2.1.1.3
externalSensorName The user-defined name.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.13742.8.1.2.1.1.4
externalSensorDescription The user-defined description.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.13742.8.1.2.1.1.5
externalSensorXCoordinate The X coordinate.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.13742.8.1.2.1.1.6
externalSensorYCoordinate The Y coordinate.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.13742.8.1.2.1.1.7
externalSensorZCoordinate The Z coordinate.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.13742.8.1.2.1.1.8
externalSensorChannelNumber The channel number, applies only to contact sensors; -1 for other sensors	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.13742.8.1.2.1.1.9
externalOnOffSensorSubtype Type of measurement in case sensor type is discrete OnOff	SensorTypeEnumerationr/w Type Values: 1 rmsCurrent 2 peakCurrent 3 unbalancedCurrent 4 rmsVoltage 5 activePower 6 apparentPower 7 powerFactor 8 activeEnergy 9 apparentEnergy 10 temperature 11 humidity 12 airFlow 13 airPressure 14 onOff 15 trip 16 vibration 17 waterDetection 18 smokeDetection 19 binary 20 contact 21 fanSpeed 28 absoluteHumidity 30 other 31 none 42 illuminance 43 doorContact 44 tamperDetection 45 motionDetection	.1.3.6.1.4.1.13742.8.1.2.1.1.10
externalSensorUnits The base units. This parameter does not apply to onOff, trip, vibration, waterDetection, smokeDetection sensors.	SensorUnitsEnumeration Type Values: -1 none 0 other 1 volt 2 amp 3 watt 4 voltamp 5 wattHour 6 voltampHour 7 degreeC 8 hertz 9 percent 10 meterpersec 11 pascal 12 psi 13 g 14 degreeF 15 feet 16 inches 17 cm 18 meters 19 rpm 20 degrees 21 lux 22 grampercubicmeter 23 voltampReactive	.1.3.6.1.4.1.13742.8.1.2.1.1.11
externalSensorDecimalDigits The number of digits displayed to the right of the decimal point This parameter does not apply to onOff, trip, vibration, waterDetection, smokeDetection sensors.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.13742.8.1.2.1.1.12
externalSensorAccuracy The accuracy: how close (in percent) the measurement is to the actual value. This parameter does not apply to onOff, trip, vibration, waterDetection, smokeDetection sensors.	HundredthsOfAPercentage Type Constraints: range: 0..10000	.1.3.6.1.4.1.13742.8.1.2.1.1.13
externalSensorResolution The resolution: the minimum difference between any two measured values. The value of this OID variable should be scaled by externalSensorDecimalDigits. For example, if the value is 1 and externalSensorDecimalDigits is …	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.13742.8.1.2.1.1.14
externalSensorTolerance The resolution: the difference between a sensor value and the actual value. The value of this OID variable should be scaled by (externalSensorDecimalDigits + 1). For example, if the value is 50 and externalSensorDecima…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.13742.8.1.2.1.1.15
externalSensorMaximum The largest possible value The value of this OID variable should be scaled by externalSensorDecimalDigits. For example, if the value is 1 and externalSensorDecimalDigits is 2, then actual value is 0.01. This parameter …	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.13742.8.1.2.1.1.16
externalSensorMinimum The smallest possible value The value of this OID variable should be scaled by externalSensorDecimalDigits. For example, if the value is 1 and externalSensorDecimalDigits is 2, then actual value is 0.01. This parameter…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.13742.8.1.2.1.1.17
externalSensorHysteresis The hysteresis used for deassertions The value of this OID variable should be scaled by externalSensorDecimalDigits. For example, if the value is 1 and externalSensorDecimalDigits is 2, then actual value is 0.01. This …	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.13742.8.1.2.1.1.18
externalSensorStateChangeDelay The delay measured in samples before a state is asserted. If the value is zero, then the state is asserted as soon as it is detected; if it is non-zero, say n, then the assertion condition must exist for n+1 consecutive…	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.13742.8.1.2.1.1.19
externalSensorLowerCriticalThreshold The lower critical threshold The value of this OID variable should be scaled by externalSensorDecimalDigits. For example, if the value is 1 and externalSensorDecimalDigits is 2, then actual value is 0.01. This paramete…	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.13742.8.1.2.1.1.20
externalSensorLowerWarningThreshold The lower non-critical (warning) threshold The value of this OID variable should be scaled by externalSensorDecimalDigits. For example, if the value is 1 and externalSensorDecimalDigits is 2, then actual value is 0.01.…	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.13742.8.1.2.1.1.21
externalSensorUpperCriticalThreshold The upper critical threshold The value of this OID variable should be scaled by externalSensorDecimalDigits. For example, if the value is 1 and externalSensorDecimalDigits is 2, then actual value is 0.01. This paramet…	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.13742.8.1.2.1.1.22
externalSensorUpperWarningThreshold The upper non-critical (warning) threshold The value of this OID variable should be scaled by externalSensorDecimalDigits. For example, if the value is 1 and externalSensorDecimalDigits is 2, then actual value is 0.01.…	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.13742.8.1.2.1.1.23
externalSensorEnabledThresholds A bit string which indicates which thresholds are enabled. This parameter does not apply to onOff, trip, vibration, waterDetection, smokeDetection sensors	Bitsr/w Enumerated Values: 0 lowerCritical 1 lowerWarning 2 upperWarning 3 upperCritical	.1.3.6.1.4.1.13742.8.1.2.1.1.24
externalSensorPort The position of the sensor. The format is a semicolon separated list of Keyword:value pairs - Keyword1:Value1;Keyword2:value2;... Keyword can be one of the following: ONBOARD, DEVICE-1WIREPORT, HUBPORT, CHAIN-…	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.13742.8.1.2.1.1.25
externalSensorIsActuator Is this an actuator? True: It is an actuator False: It is not an actuator	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.13742.8.1.2.1.1.26
externalSensorAlarmedToNormalDelay The delay in seconds for transitions from the alarmed state to the normal state. If the sensor type is motionDetection, then it can set to a value greater >= 0 For all other sensor types, the value is 0 and can…	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.13742.8.1.2.1.1.27
externalSensorUseDefaultThresholds Use default thresholds for this sensor? True: Use default thresholds for this sensor False: Do not use default thresholds for this sensor	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.13742.8.1.2.1.1.28

A list of entries listing the default thresholds for each sensor type.

externalSensorTypeDefaultThresholdsEntry row .1.3.6.1.4.1.13742.8.1.2.4.1

An entry containing default thresholds for a sensor type.

Indexes

externalSensorType

Column	Syntax	OID
externalSensorTypeDefaultHysteresis The hysteresis used for deassertions The value of this OID variable should be scaled by externalSensorDecimalDigits. For example, if the value is 1 and externalSensorDecimalDigits is 2, then actual value is 0.01. This…	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.13742.8.1.2.4.1.3
externalSensorTypeDefaultStateChangeDelay The delay measured in samples before a state is asserted. If the value is zero, then the state is asserted as soon as it is detected; if it is non-zero, say n, then the assertion condition must exist for n+1 consecutiv…	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.13742.8.1.2.4.1.4
externalSensorTypeDefaultLowerCriticalThreshold The lower critical threshold The value of this OID variable should be scaled by externalSensorDecimalDigits. For example, if the value is 1 and externalSensorDecimalDigits is 2, then actual value is 0.01. This paramet…	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.13742.8.1.2.4.1.5
externalSensorTypeDefaultLowerWarningThreshold The lower non-critical (warning) threshold The value of this OID variable should be scaled by externalSensorDecimalDigits. For example, if the value is 1 and externalSensorDecimalDigits is 2, then actual value is 0.01…	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.13742.8.1.2.4.1.6
externalSensorTypeDefaultUpperCriticalThreshold The upper critical threshold The value of this OID variable should be scaled by externalSensorDecimalDigits. For example, if the value is 1 and externalSensorDecimalDigits is 2, then actual value is 0.01. This paramet…	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.13742.8.1.2.4.1.7
externalSensorTypeDefaultUpperWarningThreshold The upper non-critical (warning) threshold The value of this OID variable should be scaled by externalSensorDecimalDigits. For example, if the value is 1 and externalSensorDecimalDigits is 2, then actual value is 0.01…	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.13742.8.1.2.4.1.8
externalSensorTypeDefaultEnabledThresholds A bit string which indicates which thresholds are enabled. This parameter does not apply to onOff, trip, vibration, waterDetection, smokeDetection sensors	Bitsr/w Enumerated Values: 0 lowerCritical 1 lowerWarning 2 upperWarning 3 upperCritical	.1.3.6.1.4.1.13742.8.1.2.4.1.9

A list of entries for the peripheral Device Packages connected to
an EMX. The number of entries is given by the value of
peripheralDevicePackagesCount.

peripheralDevicePackageEntry row .1.3.6.1.4.1.13742.8.1.2.5.1

An entry containing objects for a controller.

Indexes

peripheralDevicePackageId

Column	Syntax	OID
peripheralDevicePackageId A unique value for each peripheral device package.	Integer32 Constraints: range: 1-256	.1.3.6.1.4.1.13742.8.1.2.5.1.1
peripheralDevicePackageSerialNumber The peripheral device package serial number.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.13742.8.1.2.5.1.3
peripheralDevicePackageModel The peripheral device package model. Examples are DX-D2C6, DPX2-T1, DPX2-T1H1, DPX2-T2H1, DPX2-T3H1	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.13742.8.1.2.5.1.4
peripheralDevicePackageFirmwareVersion The peripheral device package firmware version.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.13742.8.1.2.5.1.5
peripheralDevicePackageMinFirmwareVersion The peripheral device package minimum firmware version. This field may be empty. If it is not empty, then it shall not be possible to downgrade the peripheral device firmware to a version < minimum firmware version numb…	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.13742.8.1.2.5.1.6
peripheralDevicePackageFirmwareTimeStamp The time when the peripheralDevicePackage firmware was updated in UNIX(epoch)time. It is measured in seconds relative to January 1, 1970 (midnight UTC/GMT), i.e a value of 0 indicates January 1, 1970 (midnight UTC/GMT).	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.13742.8.1.2.5.1.7
peripheralDevicePackagePosition The position of the package. The format is a semicolon separated list of Keyword:value pairs - Keyword1:Value1;Keyword2:value2;... Keyword can be one of the following: ONBOARD, DEVICE-1WIREPORT, HUBPOR…	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.13742.8.1.2.5.1.8
peripheralDevicePackageState The state of the package.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.13742.8.1.2.5.1.9

A list of server entries. The number of
entries is given by the value of serverCount for the EMD.

serverReachabilityEntry row .1.3.6.1.4.1.13742.8.1.3.1.1

An entry containing parameters for a server.

Indexes

serverID

Column	Syntax	OID
serverID A unique value for each server. Its value ranges between 1 and the value of serverCount for that EMD	Integer32 Constraints: range: 1-256	.1.3.6.1.4.1.13742.8.1.3.1.1.1
serverIPAddress The IP Address/host name of the server	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.13742.8.1.3.1.1.2
serverPingEnabled Is ping enabled for this server?	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.13742.8.1.3.1.1.3

A list of external sensor entries. The number of
entries is given by the value of externalSensorCount
for the EMD.

externalSensorMeasurementsEntry row .1.3.6.1.4.1.13742.8.2.1.1.1

An entry containing measurement objects for an external sensor.

Indexes

sensorID

Column	Syntax	OID
measurementsExternalSensorIsAvailable Is the sensor available?	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.13742.8.2.1.1.1.1
measurementsExternalSensorState The sensor state.	SensorStateEnumeration Type Values: -1 unavailable 0 open 1 closed 2 belowLowerCritical 3 belowLowerWarning 4 normal 5 aboveUpperWarning 6 aboveUpperCritical 7 on 8 off 9 detected 10 notDetected 11 alarmed	.1.3.6.1.4.1.13742.8.2.1.1.1.2
measurementsExternalSensorValue The sensor reading. This parameter does not apply to onOff, trip, vibration, waterDetection, smokeDetection sensors.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.13742.8.2.1.1.1.3
measurementsExternalSensorTimeStamp The sensor reading timestamp.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.13742.8.2.1.1.1.4

A list of entries containing the timestamps of the entries in the log.

logTimeStampEntry row .1.3.6.1.4.1.13742.8.4.1.3.1

An entry containing the timestamp for log entries.

Indexes

logIndex

Column	Syntax	OID
logIndex A unique value for each entry in the log. Its value ranges between 1 and the value of logSize.	Integer32 Constraints: range: 1-256	.1.3.6.1.4.1.13742.8.4.1.3.1.1
logTimeStamp The time when the data was collected. It is measured in seconds relative to January 1, 1970 (midnight UTC/GMT), i.e a value of 0 indicates January 1, 1970 (midnight UTC/GMT).	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.13742.8.4.1.3.1.2

A list of external sensor entries. The number of
entries is given by the value of externalSensorCount for the EMD.

externalSensorLogEntry row .1.3.6.1.4.1.13742.8.4.2.1.1

An entry containing log objects for an external sensor.

Indexes

sensorID logIndex

Column	Syntax	OID
logExternalSensorDataAvailable Is data available for this sensor during this measurement period?	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.13742.8.4.2.1.1.2
logExternalSensorState The sensor state.	SensorStateEnumeration Type Values: -1 unavailable 0 open 1 closed 2 belowLowerCritical 3 belowLowerWarning 4 normal 5 aboveUpperWarning 6 aboveUpperCritical 7 on 8 off 9 detected 10 notDetected 11 alarmed	.1.3.6.1.4.1.13742.8.4.2.1.1.3
logExternalSensorAvgValue The sensor reading average value.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.13742.8.4.2.1.1.4
logExternalSensorMaxValue The sensor reading maximum value.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.13742.8.4.2.1.1.5
logExternalSensorMinValue The sensor reading minimum value.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.13742.8.4.2.1.1.6

A list of actuators for an EMX.

actuatorControlEntry row .1.3.6.1.4.1.13742.8.5.1.1.1

An entry for implementing user-initiated state changes for an actuator.

Indexes

sensorID

Column	Syntax	OID
actuatorState The actuator state. A Get operation retrieves the state of the actuator. A Set operation changes the stae of the sensor. The valid states for set operations are on and Off. Attempting to set the state to any other value…	SensorStateEnumerationr/w Type Values: -1 unavailable 0 open 1 closed 2 belowLowerCritical 3 belowLowerWarning 4 normal 5 aboveUpperWarning 6 aboveUpperCritical 7 on 8 off 9 detected 10 notDetected 11 alarmed	.1.3.6.1.4.1.13742.8.5.1.1.1.1