EMD-MIB

Monitored by Observium
        This MIB describes the SNMP functions of the
EMX Environmental Monitoring Device by Raritan Computer.
    
Observium actively monitors this MIB
Observium uses this MIB in discovery or polling workflows on applicable devices.
Device identity Sensors
Explore Observium network monitoring
Source file
EMD-MIB
Last revised
Identity
raritan
Base OID
1.3.6.1.4.1.13742
Imported Objects
INET-ADDRESS-MIB InetAddress InetAddressType InetPortNumber
RFC1213-MIB sysContact sysLocation sysName
SNMPv2-CONF MODULE-COMPLIANCE (no object page) NOTIFICATION-GROUP (no object page) OBJECT-GROUP (no object page)
SNMPv2-SMI enterprises Integer32 MODULE-IDENTITY (no object page) NOTIFICATION-TYPE (no object page) OBJECT-TYPE (no object page) Unsigned32
SNMPv2-TC DisplayString MacAddress TEXTUAL-CONVENTION (no object page) TruthValue
Net-SNMP examples using the raritan MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'EMD-MIB' -M '/opt/observium/mibs/raritan:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'EMD-MIB::raritan'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EMD-MIB' -M '/opt/observium/mibs/raritan:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EMD-MIB::raritan'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (142)
18 directly used by Observium
.1.3.6.1.4.1.13742
emd
.1.3.6.1.4.1.13742.8
.1.3.6.1.4.1.13742.8.0
.1.3.6.1.4.1.13742.8.0.0
.1.3.6.1.4.1.13742.8.0.0.1
.1.3.6.1.4.1.13742.8.0.0.10
.1.3.6.1.4.1.13742.8.0.0.11
.1.3.6.1.4.1.13742.8.0.0.12
.1.3.6.1.4.1.13742.8.0.0.13
.1.3.6.1.4.1.13742.8.0.0.14
.1.3.6.1.4.1.13742.8.0.0.15
.1.3.6.1.4.1.13742.8.0.0.16
.1.3.6.1.4.1.13742.8.0.0.17
.1.3.6.1.4.1.13742.8.0.0.18
.1.3.6.1.4.1.13742.8.0.0.19
.1.3.6.1.4.1.13742.8.0.0.2
.1.3.6.1.4.1.13742.8.0.0.3
.1.3.6.1.4.1.13742.8.0.0.4
.1.3.6.1.4.1.13742.8.0.0.5
.1.3.6.1.4.1.13742.8.0.0.6
.1.3.6.1.4.1.13742.8.0.0.7
Integer32
.1.3.6.1.4.1.13742.8.0.0.8
.1.3.6.1.4.1.13742.8.0.0.9
.1.3.6.1.4.1.13742.8.1
unit OBS ✓
.1.3.6.1.4.1.13742.8.1.1
.1.3.6.1.4.1.13742.8.1.1.1
.1.3.6.1.4.1.13742.8.1.1.1.1
.1.3.6.1.4.1.13742.8.1.1.1.10
.1.3.6.1.4.1.13742.8.1.1.1.11
.1.3.6.1.4.1.13742.8.1.1.1.12
Integer32
.1.3.6.1.4.1.13742.8.1.1.1.13
model OBS ✓
.1.3.6.1.4.1.13742.8.1.1.1.14
.1.3.6.1.4.1.13742.8.1.1.1.15
.1.3.6.1.4.1.13742.8.1.1.1.16
.1.3.6.1.4.1.13742.8.1.1.1.17
.1.3.6.1.4.1.13742.8.1.1.1.18
.1.3.6.1.4.1.13742.8.1.1.1.19
.1.3.6.1.4.1.13742.8.1.1.1.2
.1.3.6.1.4.1.13742.8.1.1.1.20
.1.3.6.1.4.1.13742.8.1.1.1.21
.1.3.6.1.4.1.13742.8.1.1.1.22
firmwareVersion OBS ✓
.1.3.6.1.4.1.13742.8.1.1.1.3
.1.3.6.1.4.1.13742.8.1.1.1.4
Integer32
.1.3.6.1.4.1.13742.8.1.1.1.5
Integer32
.1.3.6.1.4.1.13742.8.1.1.1.6
.1.3.6.1.4.1.13742.8.1.1.1.7
.1.3.6.1.4.1.13742.8.1.1.1.8
.1.3.6.1.4.1.13742.8.1.1.1.9
.1.3.6.1.4.1.13742.8.1.1.2
.1.3.6.1.4.1.13742.8.1.1.2.1
.1.3.6.1.4.1.13742.8.1.1.2.2
.1.3.6.1.4.1.13742.8.1.1.2.3
.1.3.6.1.4.1.13742.8.1.1.2.4
.1.3.6.1.4.1.13742.8.1.1.2.5
.1.3.6.1.4.1.13742.8.1.2
.1.3.6.1.4.1.13742.8.1.2.1
.1.3.6.1.4.1.13742.8.1.2.1.1
Integer32
.1.3.6.1.4.1.13742.8.1.2.1.1.1
.1.3.6.1.4.1.13742.8.1.2.1.1.10
.1.3.6.1.4.1.13742.8.1.2.1.1.11
.1.3.6.1.4.1.13742.8.1.2.1.1.12
.1.3.6.1.4.1.13742.8.1.2.1.1.13
.1.3.6.1.4.1.13742.8.1.2.1.1.14
.1.3.6.1.4.1.13742.8.1.2.1.1.15
.1.3.6.1.4.1.13742.8.1.2.1.1.16
.1.3.6.1.4.1.13742.8.1.2.1.1.17
.1.3.6.1.4.1.13742.8.1.2.1.1.18
.1.3.6.1.4.1.13742.8.1.2.1.1.19
.1.3.6.1.4.1.13742.8.1.2.1.1.2
.1.3.6.1.4.1.13742.8.1.2.1.1.20
.1.3.6.1.4.1.13742.8.1.2.1.1.21
.1.3.6.1.4.1.13742.8.1.2.1.1.22
.1.3.6.1.4.1.13742.8.1.2.1.1.23
Bits
.1.3.6.1.4.1.13742.8.1.2.1.1.24
.1.3.6.1.4.1.13742.8.1.2.1.1.25
.1.3.6.1.4.1.13742.8.1.2.1.1.26
.1.3.6.1.4.1.13742.8.1.2.1.1.27
.1.3.6.1.4.1.13742.8.1.2.1.1.28
.1.3.6.1.4.1.13742.8.1.2.1.1.3
externalSensorName OBS ✓ r/w
.1.3.6.1.4.1.13742.8.1.2.1.1.4
.1.3.6.1.4.1.13742.8.1.2.1.1.5
.1.3.6.1.4.1.13742.8.1.2.1.1.6
.1.3.6.1.4.1.13742.8.1.2.1.1.7
.1.3.6.1.4.1.13742.8.1.2.1.1.8
.1.3.6.1.4.1.13742.8.1.2.1.1.9
.1.3.6.1.4.1.13742.8.1.2.4
.1.3.6.1.4.1.13742.8.1.2.4.1
.1.3.6.1.4.1.13742.8.1.2.4.1.3
.1.3.6.1.4.1.13742.8.1.2.4.1.4
.1.3.6.1.4.1.13742.8.1.2.4.1.5
.1.3.6.1.4.1.13742.8.1.2.4.1.6
.1.3.6.1.4.1.13742.8.1.2.4.1.7
.1.3.6.1.4.1.13742.8.1.2.4.1.8
Bits
.1.3.6.1.4.1.13742.8.1.2.4.1.9
.1.3.6.1.4.1.13742.8.1.2.5
.1.3.6.1.4.1.13742.8.1.2.5.1
Integer32
.1.3.6.1.4.1.13742.8.1.2.5.1.1
.1.3.6.1.4.1.13742.8.1.2.5.1.3
.1.3.6.1.4.1.13742.8.1.2.5.1.4
.1.3.6.1.4.1.13742.8.1.2.5.1.5
.1.3.6.1.4.1.13742.8.1.2.5.1.6
.1.3.6.1.4.1.13742.8.1.2.5.1.7
.1.3.6.1.4.1.13742.8.1.2.5.1.8
.1.3.6.1.4.1.13742.8.1.2.5.1.9
.1.3.6.1.4.1.13742.8.1.3
.1.3.6.1.4.1.13742.8.1.3.1
.1.3.6.1.4.1.13742.8.1.3.1.1
Integer32
.1.3.6.1.4.1.13742.8.1.3.1.1.1
.1.3.6.1.4.1.13742.8.1.3.1.1.2
.1.3.6.1.4.1.13742.8.1.3.1.1.3
.1.3.6.1.4.1.13742.8.2
.1.3.6.1.4.1.13742.8.2.1
.1.3.6.1.4.1.13742.8.2.1.1
.1.3.6.1.4.1.13742.8.2.1.1.1
.1.3.6.1.4.1.13742.8.2.1.1.1.1
.1.3.6.1.4.1.13742.8.2.1.1.1.2
.1.3.6.1.4.1.13742.8.2.1.1.1.3
.1.3.6.1.4.1.13742.8.2.1.1.1.4
.1.3.6.1.4.1.13742.8.3
.1.3.6.1.4.1.13742.8.3.1
.1.3.6.1.4.1.13742.8.3.2
log
.1.3.6.1.4.1.13742.8.4
.1.3.6.1.4.1.13742.8.4.1
.1.3.6.1.4.1.13742.8.4.1.1
.1.3.6.1.4.1.13742.8.4.1.2
.1.3.6.1.4.1.13742.8.4.1.3
.1.3.6.1.4.1.13742.8.4.1.3.1
Integer32
.1.3.6.1.4.1.13742.8.4.1.3.1.1
.1.3.6.1.4.1.13742.8.4.1.3.1.2
.1.3.6.1.4.1.13742.8.4.2
.1.3.6.1.4.1.13742.8.4.2.1
.1.3.6.1.4.1.13742.8.4.2.1.1
.1.3.6.1.4.1.13742.8.4.2.1.1.2
.1.3.6.1.4.1.13742.8.4.2.1.1.3
.1.3.6.1.4.1.13742.8.4.2.1.1.4
.1.3.6.1.4.1.13742.8.4.2.1.1.5
.1.3.6.1.4.1.13742.8.4.2.1.1.6
.1.3.6.1.4.1.13742.8.5
.1.3.6.1.4.1.13742.8.5.1
.1.3.6.1.4.1.13742.8.5.1.1
.1.3.6.1.4.1.13742.8.5.1.1.1
.1.3.6.1.4.1.13742.8.5.1.1.1.1
Dependencies (8) 5 direct · 3 transitive Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Dependency-first compile order
  1. SNMPv2-SMIrfc
  2. SNMPv2-TCrfc
  3. INET-ADDRESS-MIBrfc
  4. IANAifType-MIBrfc
  5. RFC-1212rfc
  6. RFC1155-SMIrfc
  7. RFC1213-MIBrfc
  8. SNMPv2-CONFrfc
  9. EMD-MIBraritanselected
Type Definitions (7)
Enumeration
deviceName(0)
sysContact(1)
sysName(2)
sysLocation(3)
Enumeration
rackUnits(0)
text(1)
Unsigned32 range: 0..10000
Enumeration
started(1)
successful(2)
failed(3)
Enumeration
unavailable(-1)
open(0)
closed(1)
belowLowerCritical(2)
belowLowerWarning(3)
normal(4)
aboveUpperWarning(5)
aboveUpperCritical(6)
on(7)
off(8)
detected(9)
notDetected(10)
alarmed(11)
Enumeration
rmsCurrent(1)
peakCurrent(2)
unbalancedCurrent(3)
rmsVoltage(4)
activePower(5)
apparentPower(6)
powerFactor(7)
activeEnergy(8)
apparentEnergy(9)
temperature(10)
humidity(11)
airFlow(12)
airPressure(13)
onOff(14)
trip(15)
vibration(16)
waterDetection(17)
smokeDetection(18)
binary(19)
contact(20)
fanSpeed(21)
absoluteHumidity(28)
other(30)
none(31)
illuminance(42)
doorContact(43)
tamperDetection(44)
motionDetection(45)
Enumeration
none(-1)
other(0)
volt(1)
amp(2)
watt(3)
voltamp(4)
wattHour(5)
voltampHour(6)
degreeC(7)
hertz(8)
percent(9)
meterpersec(10)
pascal(11)
psi(12)
g(13)
degreeF(14)
feet(15)
inches(16)
cm(17)
meters(18)
rpm(19)
degrees(20)
lux(21)
grampercubicmeter(22)
voltampReactive(23)
Conformance Groups (6)
externalSensorCount deviceInetAddressType deviceInetIPAddress deviceInetNetmask deviceInetGateway deviceMACAddress utcOffset model deviceName hardwareVersion firmwareVersion externalSensorType externalSensorSerialNumber externalSensorName externalSensorDescription externalSensorXCoordinate externalSensorYCoordinate externalSensorZCoordinate externalSensorChannelNumber externalOnOffSensorSubtype externalSensorUnits externalSensorDecimalDigits externalSensorAccuracy externalSensorResolution externalSensorTolerance externalSensorMaximum externalSensorMinimum externalSensorHysteresis externalSensorStateChangeDelay externalSensorLowerCriticalThreshold externalSensorLowerWarningThreshold externalSensorUpperCriticalThreshold externalSensorUpperWarningThreshold externalSensorEnabledThresholds externalSensorPort externalSensorsZCoordinateUnits externalSensorIsActuator externalSensorUseDefaultThresholds externalSensorTypeDefaultHysteresis externalSensorTypeDefaultStateChangeDelay externalSensorTypeDefaultLowerCriticalThreshold externalSensorTypeDefaultLowerWarningThreshold externalSensorTypeDefaultUpperCriticalThreshold externalSensorTypeDefaultUpperWarningThreshold externalSensorTypeDefaultEnabledThresholds managedExternalSensorCount serverCount serverIPAddress serverPingEnabled measurementPeriod measurementsPerLogEntry logSize cascadedDeviceConnected peripheralDevicePackageSerialNumber peripheralDevicePackageModel peripheralDevicePackageFirmwareVersion peripheralDevicePackageMinFirmwareVersion peripheralDevicePackageFirmwareTimeStamp peripheralDevicePackagePosition peripheralDevicePackageState peripheralDevicesAutoManagement externalSensorAlarmedToNormalDelay synchronizeWithNTPServer useDHCPProvidedNTPServer firstNTPServerAddressType firstNTPServerAddress secondNTPServerAddressType secondNTPServerAddress
A collection of objects representing configuration data.
.1.3.6.1.4.1.13742.8.3.2.1
A collection of objects providing the measurement
capability of EMD.
.1.3.6.1.4.1.13742.8.3.2.2
A collection of objects providing
information in the traps.
.1.3.6.1.4.1.13742.8.3.2.3
A collection of traps.
.1.3.6.1.4.1.13742.8.3.2.4
A collection of objects providing the logging capabilities
about the EMD.
.1.3.6.1.4.1.13742.8.3.2.5
A collection of objects providing the ability to control
actuators of the EMD.
.1.3.6.1.4.1.13742.8.3.2.6
Compliance Statements (1)

OID .1.3.6.1.4.1.13742.8.3.1.1
The requirements for conformance to the EMD-MIB.
Required groups
optional configGroup The configuration group.
optional measurementsGroup The measurements group.
optional trapInformationGroup The information group.
optional trapsGroup The information group.
optional logGroup The log group.
optional controlGroup The control group.
Notifications / Traps (45)
NameOIDDescription
.1.3.6.1.4.1.13742.8.0.1
The system has started.
.1.3.6.1.4.1.13742.8.0.10
A role was added to the system.
.1.3.6.1.4.1.13742.8.0.11
A role was modified.
.1.3.6.1.4.1.13742.8.0.12
A role was deleted from the system.
.1.3.6.1.4.1.13742.8.0.13
The device update has started.
.1.3.6.1.4.1.13742.8.0.14
The device update has completed.
.1.3.6.1.4.1.13742.8.0.15
A blocked user tried to log in.
.1.3.6.1.4.1.13742.8.0.16
User password was changed.
.1.3.6.1.4.1.13742.8.0.17
Strong password settings changed.
.1.3.6.1.4.1.13742.8.0.18
Firmware validation failed.
.1.3.6.1.4.1.13742.8.0.19
The log file has been cleared.
.1.3.6.1.4.1.13742.8.0.2
The system was reset. The conditions under which
this trap is sent include, but are not limited
to, the following.
using the GUI - Maintenance->Reset Unit
using the CLI - reset emd unit
.1.3.6.1.4.1.13742.8.0.20
Bulk Configuration saved.
.1.3.6.1.4.1.13742.8.0.21
Bulk Configuration saved.
.1.3.6.1.4.1.13742.8.0.22
External Sensor State Change.
.1.3.6.1.4.1.13742.8.0.23
SMTP message transmission failure
.1.3.6.1.4.1.13742.8.0.24
LDAP Error occurred; errorDescription describes
the error
.1.3.6.1.4.1.13742.8.0.25
The device update has failed.
.1.3.6.1.4.1.13742.8.0.26
The ping feature has been enabled
.1.3.6.1.4.1.13742.8.0.27
The ping feature has been disabled
.1.3.6.1.4.1.13742.8.0.28
The server is not reachable
.1.3.6.1.4.1.13742.8.0.29
The server is reachable
.1.3.6.1.4.1.13742.8.0.3
A user logged in.
.1.3.6.1.4.1.13742.8.0.30
Device identification has changed
.1.3.6.1.4.1.13742.8.0.31
USB Connectivity to slave has been established
.1.3.6.1.4.1.13742.8.0.32
USB Connectivity to slave has been lost
.1.3.6.1.4.1.13742.8.0.33
The Schroff LHX Support changed to state 'lhxSupportEnabled'.
.1.3.6.1.4.1.13742.8.0.34
The user accepted the Restricted Service Agreement.
.1.3.6.1.4.1.13742.8.0.35
The user declined the Restricted Service Agreement.
.1.3.6.1.4.1.13742.8.0.36
Device Settings have been saved.
.1.3.6.1.4.1.13742.8.0.37
Device Settings have been restored.
.1.3.6.1.4.1.13742.8.0.38
A webcam has been inserted
.1.3.6.1.4.1.13742.8.0.39
A webcam has been removed
.1.3.6.1.4.1.13742.8.0.4
A user logged out.
.1.3.6.1.4.1.13742.8.0.40
The connection to the server could not be recovered
.1.3.6.1.4.1.13742.8.0.41
LDAP Error occurred; errorDescription describes the error
.1.3.6.1.4.1.13742.8.0.42
Server Reachability Error occurred; errorDescription describes the error.
This trap is sent when the Error state is entered.
Reasons for transitioning to the Error state include the following:
Unable to resolve the server hostname.
.1.3.6.1.4.1.13742.8.0.43
An unknown peripheral device was attached.
.1.3.6.1.4.1.13742.8.0.44
The firmware update state of a peripheral device changed while
performing update to peripheralDevicePackageFirmwareVersion.
.1.3.6.1.4.1.13742.8.0.45
Sending an SMS message failed.
.1.3.6.1.4.1.13742.8.0.5
A user authentication attempt failed.
.1.3.6.1.4.1.13742.8.0.6
A user timed out from the device.
.1.3.6.1.4.1.13742.8.0.7
A user was added to the system.
.1.3.6.1.4.1.13742.8.0.8
A user account was modified.
.1.3.6.1.4.1.13742.8.0.9
A user was deleted from the system.