ELTEX-MES-PHYSICAL-DESCRIPTION-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view

Tables

Rows

Columns

eltPhdTransceiverInfoTable

table

.1.3.6.1.4.1.35265.1.23.53.1.1 · 1 row entry · 11 columns

Open in standard view

Uses the eltex variant from /opt/observium/mibs/eltex.

Command help

Walk eltPhdTransceiverInfoTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ELTEX-MES-PHYSICAL-DESCRIPTION-MIB' -M '/opt/observium/mibs/eltex:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ELTEX-MES-PHYSICAL-DESCRIPTION-MIB::eltPhdTransceiverInfoTable'

This table show the information of transceiver on interface.

eltPhdTransceiverInfoEntry row .1.3.6.1.4.1.35265.1.23.53.1.1.1

The entry of the eltPhdTransceiverInfoTable.

Indexes

IF-MIBifIndex

Column Syntax OID

eltPhdTransceiverInfoConnectorType

Connector type of the interface.

Enumeration

Enumerated Values:

0	unknown
1	sc
2	fibre-ch-st1
3	fibre-ch-st2
4	bnc-tnc
5	fibre-ch-coaxial-headers
6	fibrejack
7	lc
8	mt-rj
9	mu
10	sg
11	optical-pigtail
12	mpo-parallel-optic
32	hssdc-ii
33	copper-pigtail
34	rj45
35	no-separable-connector
127	unallocated
255	vendorspec

.1.3.6.1.4.1.35265.1.23.53.1.1.1.1

eltPhdTransceiverInfoType

Type of the interface, such as SFP/XFP/GBIC.

Enumeration

Enumerated Values:

0	unknown
1	gbic
2	sff
3	sfp-sfpplus
4	xbi-300-pin
5	xenpak
6	xfp
7	xff
8	xfp-e
9	xpak
10	x2
11	dwdm-sfp
12	qsfp
13	qsfpplus
127	reserved
255	vendorspec

.1.3.6.1.4.1.35265.1.23.53.1.1.1.2

eltPhdTransceiverInfoComplianceCode

Compliance code read from the transceiver.

OctetString

.1.3.6.1.4.1.35265.1.23.53.1.1.1.3

eltPhdTransceiverInfoWaveLength

Wave length of the interface, measured in nanometer.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.35265.1.23.53.1.1.1.4

eltPhdTransceiverInfoVendorName

Vendor name of the interface.

OctetString

.1.3.6.1.4.1.35265.1.23.53.1.1.1.5

eltPhdTransceiverInfoSerialNumber

Serial number of the interface.

OctetString

.1.3.6.1.4.1.35265.1.23.53.1.1.1.6

eltPhdTransceiverInfoFiberDiameterType

The diameter of the fiber, measured in micron.
fiber9 - 9 micron multi-mode fiber
fiber50 - 50 micron multi-mode fiber
fiber625 - 62.5 micron multi-mode fiber
copper - copper cable.

Enumeration

Enumerated Values:

1	fiber9
2	fiber50
3	fiber625
4	copper
65535	unknown

.1.3.6.1.4.1.35265.1.23.53.1.1.1.7

eltPhdTransceiverInfoTransferDistance

The maximal distance which the interface could transmit,
measured in meter.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.35265.1.23.53.1.1.1.8

eltPhdTransceiverInfoDiagnostic

Indicating whether the digital diagnostic monitoring function is supported or not.

SNMPv2-TCTruthValue

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.35265.1.23.53.1.1.1.9

eltPhdTransceiverInfoPartNumber

Part number provided by SFP vendor.

OctetString

.1.3.6.1.4.1.35265.1.23.53.1.1.1.10

eltPhdTransceiverInfoVendorRev

Revision level for part number provided by vendor.

OctetString

.1.3.6.1.4.1.35265.1.23.53.1.1.1.11

eltPhdTransceiverThresholdTable

table

.1.3.6.1.4.1.35265.1.23.53.1.2 · 1 row entry · 6 columns

Open in standard view

Uses the eltex variant from /opt/observium/mibs/eltex.

Command help

Walk eltPhdTransceiverThresholdTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ELTEX-MES-PHYSICAL-DESCRIPTION-MIB' -M '/opt/observium/mibs/eltex:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ELTEX-MES-PHYSICAL-DESCRIPTION-MIB::eltPhdTransceiverThresholdTable'

This table contains the threshold information of transceiver.

eltPhdTransceiverThresholdEntry row .1.3.6.1.4.1.35265.1.23.53.1.2.1

The entry of the eltPhdTransceiverThresholdTable.

Indexes

IF-MIBifIndex eltPhdTransceiverThresholdType

Column Syntax OID

eltPhdTransceiverThresholdType

A value indicating the threshold to configure.
temperature - degree (Celsius) -127-127, voltage - microVolt 0-6550000,
current - microAmper 0-131000, output power or input power - microWatt 0-6553

Enumeration

Enumerated Values:

0	temperature
1	supply
2	txBias
3	txOutput
4	rxOpticalPower

.1.3.6.1.4.1.35265.1.23.53.1.2.1.1

eltPhdTransceiverThresholdAction

What action to perform when value is bad.

Enumeration

Enumerated Values:

0	none
1	log
2	send-trap

.1.3.6.1.4.1.35265.1.23.53.1.2.1.2

eltPhdTransceiverThresholdHighAlarm

See eltPhdTransceiverThresholdType for details

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.35265.1.23.53.1.2.1.3

eltPhdTransceiverThresholdHighWarning

See eltPhdTransceiverThresholdType for details

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.35265.1.23.53.1.2.1.4

eltPhdTransceiverThresholdLowWarning

See eltPhdTransceiverThresholdType for details

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.35265.1.23.53.1.2.1.5

eltPhdTransceiverThresholdLowAlarm

See eltPhdTransceiverThresholdType for details

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.35265.1.23.53.1.2.1.6

eltPhdUnitGenParamTable

table

.1.3.6.1.4.1.35265.1.23.53.2 · 1 row entry · 3 columns

Open in standard view

Uses the eltex variant from /opt/observium/mibs/eltex.

Command help

Walk eltPhdUnitGenParamTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ELTEX-MES-PHYSICAL-DESCRIPTION-MIB' -M '/opt/observium/mibs/eltex:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ELTEX-MES-PHYSICAL-DESCRIPTION-MIB::eltPhdUnitGenParamTable'

For each module (board) there is an entry describing it in this
module

eltPhdUnitGenParamEntry row .1.3.6.1.4.1.35265.1.23.53.2.1

This table augments existing RADLAN table rlPhdUnitGenParamTable

Indexes

No indexes recorded

Column	Syntax	OID
eltPhdUnitGenParamCommitHash Hash of current commit.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.35265.1.23.53.2.1.1`
eltPhdUnitGenParamBuildTag Build branch.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.35265.1.23.53.2.1.2`
eltPhdUnitGenParamBuildNumber Build describe number.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.35265.1.23.53.2.1.3`

eltCascadeTable

table

.1.3.6.1.4.1.35265.1.23.53.3 · 1 row entry · 7 columns

Open in standard view

Uses the eltex variant from /opt/observium/mibs/eltex.

Command help

Walk eltCascadeTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ELTEX-MES-PHYSICAL-DESCRIPTION-MIB' -M '/opt/observium/mibs/eltex:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ELTEX-MES-PHYSICAL-DESCRIPTION-MIB::eltCascadeTable'

This table augments existing RADLAN table rlCascadeTable.

eltCascadeEntry row .1.3.6.1.4.1.35265.1.23.53.3.1

An entry of this table specifies a cascaded link information in a unit

Indexes

No indexes recorded

Column Syntax OID

eltCascadeLastChange

The value of sysUpTime at the time the cascade interface
entered its current operational state.

SNMPv2-SMITimeTicks

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.35265.1.23.53.3.1.1

eltCascadeOperStatus

This variable indicates the state of this interface.

Enumeration

Enumerated Values:

1	up
2	down

.1.3.6.1.4.1.35265.1.23.53.3.1.2

eltCascadeDuplexOperMode

This variable indicates whether this interface operates in half
duplex or full duplex mode.

Enumeration

Enumerated Values:

1	half
2	full
3	hybrid
4	unknown

.1.3.6.1.4.1.35265.1.23.53.3.1.3

eltCascadeOperSpeedDuplexAutoNegotiation

If enabled the speed and duplex are determined by the device through
the autonegotiation process.

Enumeration

Enumerated Values:

1	enabled
2	disabled
3	hybrid
4	unknown

.1.3.6.1.4.1.35265.1.23.53.3.1.4

eltCascadeOperMdix

cross - The interface is in crossover mode.
normal - The interface is not in crossover mode.
unknown - Only for port that its operative status is not present
or down.

Enumeration

Enumerated Values:

1	normal
2	cross
3	auto
4	unknown

.1.3.6.1.4.1.35265.1.23.53.3.1.5

eltCascadeTransceiverType

This variable indicates the transceiver type of this interface.

Enumeration

Enumerated Values:

1	regular
2	fiberOptics
3	comboRegular
4	comboFiberOptics

.1.3.6.1.4.1.35265.1.23.53.3.1.6

eltCascadeIfType

This variable specifies the type of interface.

Enumeration

Enumerated Values:

1	eth10M
2	eth100M
3	eth1000M
4	eth10G
5	eth20G
6	eth40G
7	eth100G
8	unknown

.1.3.6.1.4.1.35265.1.23.53.3.1.7