ELTEX-MES-ISS-IP6-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
5
Rows
5
Columns
26

eltMesIssL2Ip6NDInspPortTable

table
.1.3.6.1.4.1.35265.1.139.25.1.1.2.1 · 1 row entry · 4 columns
Open in standard view
Uses the eltex variant from /opt/observium/mibs/eltex.
Command help
Walk eltMesIssL2Ip6NDInspPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ELTEX-MES-ISS-IP6-MIB' -M '/opt/observium/mibs/eltex:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ELTEX-MES-ISS-IP6-MIB::eltMesIssL2Ip6NDInspPortTable' 
The table to configure IPv6 ND Inspection on ports.
eltMesIssL2Ip6NDInspPortEntry row .1.3.6.1.4.1.35265.1.139.25.1.1.2.1.1
Defines the contents of each line in the eltMesIssL2Ip6NDInspectionPortTable table.
Indexes
Column Syntax OID
eltMesIssL2Ip6NDInspPortStatus
This object is used to enable/disable the ND Inspection feature on the port.
Enumerationr/w
Enumerated Values:
1disable
2enable
 .1.3.6.1.4.1.35265.1.139.25.1.1.2.1.1.1
eltMesIssL2Ip6NDInspPortPolicyId
This object configures policy id on the interface.
A value of 0 indicates that no policy is applied on the interface.
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.35265.1.139.25.1.1.2.1.1.2
eltMesIssL2Ip6NDInspPortTrustState
This object changes port trust state for L2IPv6 ND Inspection.
On untrusted(1) port Neighbor Advertisement packets will be dropped.
Enumerationr/w
Enumerated Values:
1untrusted
2trusted
 .1.3.6.1.4.1.35265.1.139.25.1.1.2.1.1.3
eltMesIssL2Ip6NDInspPortRowStatus
This object changes port status for L2IPv6 ND Inspection.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.35265.1.139.25.1.1.2.1.1.4

eltMesIssL2Ip6NDInspPolicyTable

table
.1.3.6.1.4.1.35265.1.139.25.1.1.3.1 · 1 row entry · 8 columns
Open in standard view
Uses the eltex variant from /opt/observium/mibs/eltex.
Command help
Walk eltMesIssL2Ip6NDInspPolicyTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ELTEX-MES-ISS-IP6-MIB' -M '/opt/observium/mibs/eltex:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ELTEX-MES-ISS-IP6-MIB::eltMesIssL2Ip6NDInspPolicyTable' 
This table contains policy match criteria to validate the legitimate NA messages.
eltMesIssL2Ip6NDInspPolicyEntry row .1.3.6.1.4.1.35265.1.139.25.1.1.3.1.1
Each entry contains the policy details.
Indexes
Column Syntax OID
eltMesIssL2Ip6NDInspPolicyId
This object is used as the first index in the eltMesIssL2Ip6NDInspectionPolicyTable.
It indicates the ND Inspection Policy id.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.35265.1.139.25.1.1.3.1.1.1
eltMesIssL2Ip6NDInspSrcAddrAclId
This object configures the source IPv6 ACL id used to validate the
source IPv6 address carried by NA message.
Value 0 indicates that no source IPv6 ACL is associated to the policy entry.
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.35265.1.139.25.1.1.3.1.1.2
eltMesIssL2Ip6NDInspRbit
This object is used to configure verification of
the advertised 'router flag' to be disabled / enabled
None(1) indicates that validation of this field in NA message will be bypassed.
Enumerationr/w
Enumerated Values:
1none
2disabled
3enabled
 .1.3.6.1.4.1.35265.1.139.25.1.1.3.1.1.3
eltMesIssL2Ip6NDInspSbit
This object is used to configure verification of
the advertised 'solicited flag' to be disabled / enabled
None(1) indicates that validation of this field in NA message will be bypassed.
Enumerationr/w
Enumerated Values:
1none
2disabled
3enabled
 .1.3.6.1.4.1.35265.1.139.25.1.1.3.1.1.4
eltMesIssL2Ip6NDInspObit
This object is used to configure verification of
the advertised 'override flag' to be disabled / enabled
None(1) indicates that validation of this field in NA message will be bypassed.
Enumerationr/w
Enumerated Values:
1none
2disabled
3enabled
 .1.3.6.1.4.1.35265.1.139.25.1.1.3.1.1.5
eltMesIssL2Ip6NDInspTgtAddrAclId
This object configures the target IPv6 ACL id used to validate the
target IPv6 address field in NA message.
Value 0 indicates that no target IPv6 ACL is associated to the policy entry.
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.35265.1.139.25.1.1.3.1.1.6
eltMesIssL2Ip6NDInspTgtMacAclId
This object onfigures the access list for the policy entry
which is used to validate the target link layer address option carried by NA message.
Value 0 indicates that no access list is associated to the policy entry.
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.35265.1.139.25.1.1.3.1.1.7
eltMesIssL2Ip6NDInspPolicyRowStatus
This object is used to create or delete the entry in the ND Inspection policy table.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.35265.1.139.25.1.1.3.1.1.8

eltMesIssL2Ip6NDInspSrcAddrAclTable

table
.1.3.6.1.4.1.35265.1.139.25.1.1.3.2 · 1 row entry · 5 columns
Open in standard view
Uses the eltex variant from /opt/observium/mibs/eltex.
Command help
Walk eltMesIssL2Ip6NDInspSrcAddrAclTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ELTEX-MES-ISS-IP6-MIB' -M '/opt/observium/mibs/eltex:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ELTEX-MES-ISS-IP6-MIB::eltMesIssL2Ip6NDInspSrcAddrAclTable' 
This table contains source IPv6 prefix ACL information that can
be set as match criteria in the ND Inspection policy entry.
This can be used for validating the source IPv6 carried by
incoming NA messages.
eltMesIssL2Ip6NDInspSrcAddrAclEntry row .1.3.6.1.4.1.35265.1.139.25.1.1.3.2.1
Each entry contains the source IPv6 prefixes used to validate the prefix information
carried in NA messages.
Indexes
Column Syntax OID
eltMesIssL2Ip6NDInspSrcAddrAclNo
This object indicates the source IPv6 prefix ACL id of this entry.
The source IPv6 prefix ACL id can be mapped to ND Inspection policy entry to
configure the matching criteria for the policy entry.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.35265.1.139.25.1.1.3.2.1.1
eltMesIssL2Ip6NDInspSrcAddrAclEntryNo
This object indicates entry number for each source IPv6 prefix.
For a single source IPv6 prefix ACL id, many entries can be created. Thus several
source IPv6 prefixes can be associated to a prefix ACL id.
Integer32
Constraints:
range: 1-100
 .1.3.6.1.4.1.35265.1.139.25.1.1.3.2.1.2
eltMesIssL2Ip6NDInspSrcAddrAclAddr
This object is used to configure source IPv6 prefix value of this entry.
INET-ADDRESS-MIBInetAddressIPv6r/w
Type Constraints:
range: 16
 .1.3.6.1.4.1.35265.1.139.25.1.1.3.2.1.3
eltMesIssL2Ip6NDInspSrcAddrAclPrefixLen
This object is used to configure prefix length for each source IPv6 prefix.
Integer32r/w
Constraints:
range: 1-128
 .1.3.6.1.4.1.35265.1.139.25.1.1.3.2.1.4
eltMesIssL2Ip6NDInspSrcAddrAclRowStatus
This object is used to create or delete entry in the source IPv6 address prefix ACL table.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.35265.1.139.25.1.1.3.2.1.5

eltMesIssL2Ip6NDInspTgtAddrAclTable

table
.1.3.6.1.4.1.35265.1.139.25.1.1.3.3 · 1 row entry · 5 columns
Open in standard view
Uses the eltex variant from /opt/observium/mibs/eltex.
Command help
Walk eltMesIssL2Ip6NDInspTgtAddrAclTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ELTEX-MES-ISS-IP6-MIB' -M '/opt/observium/mibs/eltex:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ELTEX-MES-ISS-IP6-MIB::eltMesIssL2Ip6NDInspTgtAddrAclTable' 
This table contains IPv6 address prefix ACL information that can be
set as match criteria in the ND Inspection policy entry.
This can be used for validating the IPv6 address prefixes carried by incoming NA messages.
eltMesIssL2Ip6NDInspTgtAddrAclEntry row .1.3.6.1.4.1.35265.1.139.25.1.1.3.3.1
Each entry contains the IPv6 address prefixes used to validate the prefix information
carried in NA messages.
Indexes
Column Syntax OID
eltMesIssL2Ip6NDInspTgtAddrAclNo
This object indicates the prefix ACL number of this entry.
This prefix ACL id can be mapped to ND Inspection policy entry
to configure the matching criteria for the policy entry.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.35265.1.139.25.1.1.3.3.1.1
eltMesIssL2Ip6NDInspTgtAddrAclEntryNo
This object indicates entry number for each prefix.
For a single prefix ACL id, many entries can be created. Thus several prefixes can be associated to
a prefix ACL id.
Integer32
Constraints:
range: 1-100
 .1.3.6.1.4.1.35265.1.139.25.1.1.3.3.1.2
eltMesIssL2Ip6NDInspTgtAddrAclAddr
This object is used to configure target IPv6 address value for this entry.
INET-ADDRESS-MIBInetAddressIPv6r/w
Type Constraints:
range: 16
 .1.3.6.1.4.1.35265.1.139.25.1.1.3.3.1.3
eltMesIssL2Ip6NDInspTgtAddrAclPrefixLen
This object is used to configure prefix length for each target IPv6 address.
Integer32r/w
Constraints:
range: 1-128
 .1.3.6.1.4.1.35265.1.139.25.1.1.3.3.1.4
eltMesIssL2Ip6NDInspTgtAddrAclRowStatus
This object is used to create or delete entry in the prefix ACL table.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.35265.1.139.25.1.1.3.3.1.5

eltMesIssL2Ip6NDInspTgtMacAclTable

table
.1.3.6.1.4.1.35265.1.139.25.1.1.3.4 · 1 row entry · 4 columns
Open in standard view
Uses the eltex variant from /opt/observium/mibs/eltex.
Command help
Walk eltMesIssL2Ip6NDInspTgtMacAclTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ELTEX-MES-ISS-IP6-MIB' -M '/opt/observium/mibs/eltex:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ELTEX-MES-ISS-IP6-MIB::eltMesIssL2Ip6NDInspTgtMacAclTable' 
This table contains access list information to be
set as match criteria in the ND Inspection policy table
to validate the incoming NA message.
eltMesIssL2Ip6NDInspTgtMacAclEntry row .1.3.6.1.4.1.35265.1.139.25.1.1.3.4.1
Each entry contains the information about access list.
Indexes
Column Syntax OID
eltMesIssL2Ip6NDInspTgtMacAclNo
This object indicates the ACL number for this entry.
This ACL number can be mapped to ND Inspection policy entry
to configure the matching criteria for the policy entry.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.35265.1.139.25.1.1.3.4.1.1
eltMesIssL2Ip6NDInspTgtMacAclEntryNo
This object indicates an entry associated with the ACL number.
For a single ACL number, many entries can be created.
Thus several MAC addresses can be associated to an ACL number.
Integer32
Constraints:
range: 1-100
 .1.3.6.1.4.1.35265.1.139.25.1.1.3.4.1.2
eltMesIssL2Ip6NDInspTgtMacAclMacAddr
This object is used to configure the target MAC address
associated with the ACL id.
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.35265.1.139.25.1.1.3.4.1.3
eltMesIssL2Ip6NDInspTgtMacAclRowStatus
This object is used to create or delete entry in the ND Inspection MAC ACL table.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.35265.1.139.25.1.1.3.4.1.4