ELTEX-L2-TUNNEL-CONFIG-MIB

        This MIB module is for layer 2 tunneling related configurations
on a device.
        
Tunneling allows separate local networks to be considered as
a single VLAN. These separate networks are connected via an
ISP, which will tunnel the packets from one network to another,
making it appear as if the two networks are actually just one.
    
Source file
ELTEX-L2-TUNNEL-CONFIG-MIB
Last revised
Identity
eltexL2TunnelConfig
Base OID
1.3.6.1.4.1.35265.37
Imported Objects
QosLayer2Cos
ELTEX-SMI-ACTUAL eltexLtd
IF-MIB ifIndex
SNMPv2-CONF MODULE-COMPLIANCE (no object page) NOTIFICATION-GROUP (no object page) OBJECT-GROUP (no object page)
SNMPv2-SMI Counter32 MODULE-IDENTITY (no object page) NOTIFICATION-TYPE (no object page) OBJECT-TYPE (no object page) Unsigned32
SNMPv2-TC MacAddress TruthValue
Net-SNMP examples using the eltex MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'ELTEX-L2-TUNNEL-CONFIG-MIB' -M '/opt/observium/mibs/eltex:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'ELTEX-L2-TUNNEL-CONFIG-MIB::eltexL2TunnelConfig'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ELTEX-L2-TUNNEL-CONFIG-MIB' -M '/opt/observium/mibs/eltex:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ELTEX-L2-TUNNEL-CONFIG-MIB::eltexL2TunnelConfig'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (24)
.1.3.6.1.4.1.35265.37
.1.3.6.1.4.1.35265.37.1
.1.3.6.1.4.1.35265.37.1.1
.1.3.6.1.4.1.35265.37.1.1.1
.1.3.6.1.4.1.35265.37.1.1.2
.1.3.6.1.4.1.35265.37.1.2
.1.3.6.1.4.1.35265.37.1.2.1
.1.3.6.1.4.1.35265.37.1.2.1.1
Bits
.1.3.6.1.4.1.35265.37.1.2.1.1.1
.1.3.6.1.4.1.35265.37.1.3
.1.3.6.1.4.1.35265.37.1.3.1
.1.3.6.1.4.1.35265.37.1.3.1.1
.1.3.6.1.4.1.35265.37.1.3.1.1.1
.1.3.6.1.4.1.35265.37.1.3.1.1.2
.1.3.6.1.4.1.35265.37.1.3.1.1.3
.1.3.6.1.4.1.35265.37.1.4
.1.3.6.1.4.1.35265.37.1.4.1
.1.3.6.1.4.1.35265.37.1.4.1.1
.1.3.6.1.4.1.35265.37.1.4.1.1.1
encapsulated PDUsSNMPv2-SMICounter32
.1.3.6.1.4.1.35265.37.1.4.1.1.2
de-encapsulated PDUsSNMPv2-SMICounter32
.1.3.6.1.4.1.35265.37.1.4.1.1.3
.1.3.6.1.4.1.35265.37.1.4.1.1.4
.1.3.6.1.4.1.35265.37.2
.1.3.6.1.4.1.35265.37.2.0
Dependencies (7) 5 direct · 2 transitive Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Dependency-first compile order
  1. SNMPv2-SMIrfc
  2. SNMPv2-CONFrfc
  3. SNMPv2-TCrfc
  4. ELTEX-SMI-ACTUALeltex
  5. IANAifType-MIBrfc
  6. SNMPv2-MIBrfc
  7. IF-MIBrfc
  8. ELTEX-L2-TUNNEL-CONFIG-MIBeltexselected
Type Definitions (1)
Enumeration
stp(1)
eth-fc(2)
lacp(3)
lldp(4)
isis-l1(5)
isis-l2(6)
pvst(7)
cdp(8)
dtp(9)
vtp(10)
pagp(11)
udld(12)
rip(13)
ospf(14)
vrrp(15)
Notifications / Traps (2)
NameOIDDescription
.1.3.6.1.4.1.35265.37.2.0.1
This notification is generated when the
eltexLtcTunnelDropThreshold has been exceeded.
.1.3.6.1.4.1.35265.37.2.0.2
This notification is generated when the
eltexLtcTunnelShutdownThreshold has been exceeded.