ELS100-S24TX2M-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
3
Rows
3
Columns
19

switchInfoTable

table
.1.3.6.1.4.1.52.3.9.1.10.7.1.2 · 1 row entry · 11 columns
Open in standard view
Uses the cabletron variant from /opt/observium/mibs/cabletron.
Command help
Walk switchInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ELS100-S24TX2M-MIB' -M '/opt/observium/mibs/cabletron:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ELS100-S24TX2M-MIB::switchInfoTable' 
Table of descriptive and status information about
switches in this system.
switchInfoEntry row .1.3.6.1.4.1.52.3.9.1.10.7.1.2.1
An entry in the table, containing information
about a single switch in this system.
Indexes
Column Syntax OID
swUnitIndex
This object identifies the switch within the system
for which this entry contains information. This
value can never be greater than switchNumber.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.3.9.1.10.7.1.2.1.1
swMainBoardHwVer
Hardware version of the main board.
OctetString
Constraints:
range: 0-20
 .1.3.6.1.4.1.52.3.9.1.10.7.1.2.1.2
swMainBoardFwVer
Firmware version of the main board.
OctetString
Constraints:
range: 0-20
 .1.3.6.1.4.1.52.3.9.1.10.7.1.2.1.3
swAgentBoardHwVer
Hardware version of the agent board.
OctetString
Constraints:
range: 0-20
 .1.3.6.1.4.1.52.3.9.1.10.7.1.2.1.4
swAgentBoardFwVer
Firmware version of the agent board.
OctetString
Constraints:
range: 0-20
 .1.3.6.1.4.1.52.3.9.1.10.7.1.2.1.5
swAgentBoardPOSTCodeVer
POST code version of the agent board.
OctetString
Constraints:
range: 0-20
 .1.3.6.1.4.1.52.3.9.1.10.7.1.2.1.6
swPortNumber
The total port number of this switch
(including expansion slot).
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.3.9.1.10.7.1.2.1.7
swPowerStatus
Indicates the switch using internalPower(1),
redundantPower(2) or both(3)
Enumeration
Enumerated Values:
1internalPower
2redundantPower
3internalAndRedundantPower
 .1.3.6.1.4.1.52.3.9.1.10.7.1.2.1.8
swExpansionSlot1
Type of expansion module in this switch slot 1.
Enumeration
Enumerated Values:
1hundredBaseFX2Port
2thousandBaseSX
3stackingModule4GB
4hundredBaseFX1Port
5thousandBaseLX
6thousandBaseT
7thousandBaseGBIC
8stackingModule2GB
9other
10notPresent
 .1.3.6.1.4.1.52.3.9.1.10.7.1.2.1.9
swExpansionSlot2
Type of expansion module in this switch slot 2.
Enumeration
Enumerated Values:
1hundredBaseFX2Port
2thousandBaseSX
3stackingModule4GB
4hundredBaseFX1Port
5thousandBaseLX
6thousandBaseT
7thousandBaseGBIC
8stackingModule2GB
9other
10notPresent
 .1.3.6.1.4.1.52.3.9.1.10.7.1.2.1.10
swRoleInSystem
Indicates the switch is master(1), backupMaster(2)
or slave(3) in this system.
Enumeration
Enumerated Values:
1master
2backupMaster
3slave
 .1.3.6.1.4.1.52.3.9.1.10.7.1.2.1.11

switchOIDTable

table
.1.3.6.1.4.1.52.3.9.1.10.7.1.3 · 1 row entry · 2 columns
Open in standard view
Uses the cabletron variant from /opt/observium/mibs/cabletron.
Command help
Walk switchOIDTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ELS100-S24TX2M-MIB' -M '/opt/observium/mibs/cabletron:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ELS100-S24TX2M-MIB::switchOIDTable' 
Table of System Object Identifiers for switches
in this system.
switchOIDEntry row .1.3.6.1.4.1.52.3.9.1.10.7.1.3.1
An entry in the table, containing System Object
Identifier for a single switch in this system.
Indexes
Column Syntax OID
switchOIDIndex
This object identifies the switch within the system
for which this entry contains information. This
value can never be greater than switchNumber.

Index value 1 always represents the Master in a
stacked co…
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.52.3.9.1.10.7.1.3.1.1
switchOIDValue
This object contains the System Object Identifier
that uniquely identifies the type of switch.
ObjectIdentifier .1.3.6.1.4.1.52.3.9.1.10.7.1.3.1.2

switchPortMgtTable

table
.1.3.6.1.4.1.52.3.9.1.10.7.2.1 · 1 row entry · 6 columns
Open in standard view
Uses the cabletron variant from /opt/observium/mibs/cabletron.
Command help
Walk switchPortMgtTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ELS100-S24TX2M-MIB' -M '/opt/observium/mibs/cabletron:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ELS100-S24TX2M-MIB::switchPortMgtTable' 
Table of descriptive and status information about
configuration of each switch ports (including
expansion slot) in this system.
switchPortMgtEntry row .1.3.6.1.4.1.52.3.9.1.10.7.2.1.1
An entry in the table, containing information about
configuration in one switch port of the switch.
Indexes
Column Syntax OID
swPortMgtIndex
This object identifies the port within the switch
for which this entry contains information.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.3.9.1.10.7.2.1.1.1
swPortMgtPortType
Indicates the port type is tenBaseT/hundredBaseTX(1),
hundredBaseFX(2) or thousandBaseSX(3).
Enumeration
Enumerated Values:
1hundredBaseTX
2hundredBaseFX
3thousandBaseSX
 .1.3.6.1.4.1.52.3.9.1.10.7.2.1.1.2
swPortMgtSpeedDpxAdmin
Set the port speed and duplex mode as follows:
halfDuplex10(1) - 10Mbps and half duplex mode
fullDuplex10(2) - 10Mbps and full duplex mode
halfDuplex100(3) - 100Mbps and half duplex mode
fullDuplex100(4) …
Enumerationr/w
Enumerated Values:
1halfDuplex10
2fullDuplex10
3halfDuplex100
4fullDuplex100
5halfDuplex1000
6fullDuplex1000
7autoNegotiation
 .1.3.6.1.4.1.52.3.9.1.10.7.2.1.1.3
swPortMgtSpeedDpxInUse
The operating speed and duplex mode of the switched port.
Enumeration
Enumerated Values:
1halfDuplex10
2fullDuplex10
3halfDuplex100
4fullDuplex100
5halfDuplex1000
6fullDuplex1000
 .1.3.6.1.4.1.52.3.9.1.10.7.2.1.1.4
swPortMgtFlowCtrlAdmin
(1) Flow control mechanism is enabled.

If the port type is hundredBaseTX or thousandBaseSX:
When the port is operating in halfDuplex mode,
the port uses backPressure flow control mechanism.
…
Enumerationr/w
Enumerated Values:
1enabled
2disabled
3backPressure
4dot3xFlowControl
 .1.3.6.1.4.1.52.3.9.1.10.7.2.1.1.5
swPortMgtFlowCtrlInUse
(1) BackPressure flow control mechanism is used.
(2) IEEE 802.3 flow control mechanism is used.
(3) Flow control mechanism is disabled.
Enumeration
Enumerated Values:
1backPressure
2dot3xFlowControl
3none
 .1.3.6.1.4.1.52.3.9.1.10.7.2.1.1.6