ELH100-MIB Table View

Community table

elh100CommunityEntry row .1.3.6.1.4.1.52.259.10.3.1.2.3.1

Indexes

elh100CommunityIndex

Column	Syntax	OID
elh100CommunityIndexmandatory Index in community table.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.259.10.3.1.2.3.1.1
elh100CommunityRowCreationmandatory The status of this row entry. Before add a row into table, it should be created first. Set Valid(1) to a row will create this row. To delete a row from this table, set this object for the row to invalid(2). Row sets for…	Enumerationr/w Enumerated Values: 1 valid 2 invalid	.1.3.6.1.4.1.52.259.10.3.1.2.3.1.2
elh100CommunityStringmandatory The community string that is required for any requests coming from this host. The default value for this object is 'public'.	OctetStringr/w Constraints: range: 1-20	.1.3.6.1.4.1.52.259.10.3.1.2.3.1.3
elh100CommunityStatusmandatory Access mode of the community.	Enumerationr/w Enumerated Values: 1 invalid 2 readOnly 3 readWrite	.1.3.6.1.4.1.52.259.10.3.1.2.3.1.4

A list of IP trap destination entries.

elh100TrapMgtEntry row .1.3.6.1.4.1.52.259.10.3.1.3.2.1

A destination entry which defines the IP address to which traps are sent
for a community.

Indexes

elh100TrapMgtIndex

Column	Syntax	OID
elh100TrapMgtIndexmandatory A value that uniquely identifies this IPTrap Entry.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.259.10.3.1.3.2.1.1
elh100TrapMgtRowCreationmandatory The status of this row entry. Before add a row into table, it should be created first. Set valid(1) to a row will create this row. To delete a row from this table, set this object for the row to invalid(2). Row sets for…	Enumerationr/w Enumerated Values: 1 valid 2 invalid	.1.3.6.1.4.1.52.259.10.3.1.3.2.1.2
elh100TrapMgtCommunityStringmandatory A community name to which this destination IP address belongs.	OctetStringr/w Constraints: range: 1-20	.1.3.6.1.4.1.52.259.10.3.1.3.2.1.3
elh100TrapMgtIpAddressmandatory The IP address to send traps to on behalf of this entry.	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.52.259.10.3.1.3.2.1.4

This table defines the unit serial numbers tracked by the agent.
A maximum of 6 serial numbers are tracked.

serialNumberEntry row .1.3.6.1.4.1.52.259.10.3.2.2.2.1

Indexes

sNIndex

Column	Syntax	OID
sNIndexmandatory The index of the serial number being referenced. Indexes are always sequential, starting with 1.	Integer32 Constraints: range: 1-6	.1.3.6.1.4.1.52.259.10.3.2.2.2.1.1
serialNumbermandatory The serial number. Every ELH100 unit has a unique serial number.	OctetString Constraints: range: 6-6	.1.3.6.1.4.1.52.259.10.3.2.2.2.1.2
sNCurrentUnitIDmandatory The current unit ID of the unit with this serial number. If the unit with this serial number is not currently in the stack, this object's value is 255. If this object does not match sNIndex, it may mean …	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.259.10.3.2.2.2.1.3

This table defines basic configuration information for each
unit in the stack.

groupEntry row .1.3.6.1.4.1.52.259.10.3.2.3.1.1

Indexes

groupID

Column	Syntax	OID
groupIDmandatory The group ID of the group being referenced. Groups are numbered in top-down order, with the top group being group 1. Attempts to reference nonexistent groups are rejected with an error-status of noSuchName(2).	Integer32 Constraints: range: 1-6	.1.3.6.1.4.1.52.259.10.3.2.3.1.1.1
groupTypemandatory The type of group.	Enumeration Enumerated Values: 1 notPresent 2 unknown 3 elh100-12tx 4 elh100-24tx	.1.3.6.1.4.1.52.259.10.3.2.3.1.1.2
groupCounterResetmandatory Setting this object to reset(2) causes the agent to reset all RFC1757 and RFC2108 counters for all ports on this group. This object always returns noReset(1) when read. Attempts to set this object to noReset(1) are re…	Enumerationr/w Enumerated Values: 1 noReset 2 reset	.1.3.6.1.4.1.52.259.10.3.2.3.1.1.3
mgmtModuleStatusmandatory The status of this group's management module. Only one management module in a stack is allowed to act as the active agent. A value of notPresent(1) indicates that there is no management module in this group. A value …	Enumeration Enumerated Values: 1 notPresent 2 active 3 standby	.1.3.6.1.4.1.52.259.10.3.2.3.1.1.4
mgmtModuleDatabaseVersionmandatory The configuration database version number of this managing agent. If a management module is not present, this object's value is a zero-length string. Each management agent contains a database version that…	OctetString Constraints: range: 64-64	.1.3.6.1.4.1.52.259.10.3.2.3.1.1.5
switchModuleTypemandatory The type of the switch module.	Enumeration Enumerated Values: 1 notPresent 2 unknown 3 internalSwitch10-100 4 mediaTX-10-100 5 mediaFX-SC 6 mediaFX-ST 7 switchMediaTX-10-100 8 switchMediaFX-SC 9 switchMediaFX-ST	.1.3.6.1.4.1.52.259.10.3.2.3.1.1.6
switchModuleActivemandatory Indicates whether or not a switch module is active. In order to avoid network loops, the switch hardware allows only one switch to bridge the stack's common 10Mbps and 100Mbps backplanes. Redundant switches are automa…	Enumeration Enumerated Values: 1 active 2 notActive 3 notApplicable	.1.3.6.1.4.1.52.259.10.3.2.3.1.1.7

This table provides backplane isolation/connection status for
each unit's 100Mbps and 10Mbps segments.

backplaneEntry row .1.3.6.1.4.1.52.259.10.3.2.3.2.1

Indexes

backplaneGroupID backplaneSegmentID

Column	Syntax	OID
backplaneGroupIDmandatory The group ID of the segment being referenced. Groups are numbered in top-down order, with the top group being group 1. Attempts to reference nonexistent groups are rejected with an error-status of noSuchName(2).	Integer32 Constraints: range: 1-6	.1.3.6.1.4.1.52.259.10.3.2.3.2.1.1
backplaneSegmentIDmandatory The segment ID of the segment being referenced.	Enumeration Enumerated Values: 10 tenMbps 100 oneHundredMbps	.1.3.6.1.4.1.52.259.10.3.2.3.2.1.2
backplaneIsolatedmandatory The status of the segment's connection to the backplane bus. The factory setting is attached(2).	Enumerationr/w Enumerated Values: 1 isolated 2 attached	.1.3.6.1.4.1.52.259.10.3.2.3.2.1.3

This table defines basic configuration information for each
repeater port in the stack.

portEntry row .1.3.6.1.4.1.52.259.10.3.2.4.1.1

Indexes

portGroupID portID

Column	Syntax	OID
portGroupIDmandatory The group ID of the repeater port being referenced. Groups are numbered in top-down order, with the top group being group 1. Attempts to reference nonexistent groups are rejected with an error-status of noSuchName(2).	Integer32 Constraints: range: 1-6	.1.3.6.1.4.1.52.259.10.3.2.4.1.1.1
portIDmandatory The port ID of the repeater port being referenced.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.259.10.3.2.4.1.1.2
portLinkSpeedmandatory The speed at which the port is currently operating. If there is no link on the port, this object returns noLink(1).	Enumeration Enumerated Values: 1 noLink 10 tenMbps 100 oneHundredMbps	.1.3.6.1.4.1.52.259.10.3.2.4.1.1.3
portSpeedConfigmandatory Selects the speed at which the port operates. The factory setting is autoNegotiate(1).	Enumerationr/w Enumerated Values: 1 autoNegotiate 10 tenMbps 100 oneHundredMbps	.1.3.6.1.4.1.52.259.10.3.2.4.1.1.4

This table provides configuration information about each port
on each switch module in the stack.

switchPortEntry row .1.3.6.1.4.1.52.259.10.3.4.1.1.1

Indexes

switchPortGroupID switchPortID

Column	Syntax	OID
switchPortGroupIDmandatory The group ID of the switch module port being referenced. Groups are numbered in top-down order, with the top group being group 1. If a switch module is not installed on the group, then a GetNextRequest skips the entry.…	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.259.10.3.4.1.1.1.1
switchPortIDmandatory The port ID of the switch module port being referenced. Port 1 is always the internal 100Mbps port. Port 2 is always the internal 10Mbps port; note that this port is inactive on media modules. Port 3 is always the e…	Integer32 Constraints: range: 1-3	.1.3.6.1.4.1.52.259.10.3.4.1.1.1.2
switchPortAdminStatusmandatory The administrative status of the port. Setting this object to enabled(1) enables the port. Setting this object to disabled(2) disables the port. On media modules, port 2 (the internal 10Mbps port) cannot be managed. …	Enumerationr/w Enumerated Values: 1 enabled 2 disabled 3 notApplicable	.1.3.6.1.4.1.52.259.10.3.4.1.1.1.3
switchPortSpeedmandatory The speed at which the switch port is currently operating. If the port is inactive (port 2 on media modules and port 3 on internal switch modules), noLink(1) is returned.	Enumeration Enumerated Values: 1 noLink 10 tenMbps 100 oneHundredMbps	.1.3.6.1.4.1.52.259.10.3.4.1.1.1.4
switchPortDuplexmandatory The duplex mode in which the switch port is currently operating. If the port is inactive (port 2 on media modules and port 3 on internal switch modules), notApplicable(3) is returned.	Enumeration Enumerated Values: 1 halfDuplex 2 fullDuplex 3 notApplicable	.1.3.6.1.4.1.52.259.10.3.4.1.1.1.5
switchPortLinkmandatory Indicates if link is detected on the port. If the port is inactive (port 2 on media modules and port 3 on internal switch modules), noLink(2) is returned.	Enumeration Enumerated Values: 1 link 2 noLink	.1.3.6.1.4.1.52.259.10.3.4.1.1.1.6

This table provides statistics on each port on each switch
module in the stack.  Note that statistics for the external
port on media and switch/media modules are unavailable to the
agent and are reported as 0.  Statistics for port 2 (the internal
10Mbps port) on media modules are also reported as 0.

switchPortStatsEntry row .1.3.6.1.4.1.52.259.10.3.4.2.1.1

Indexes

switchPortStatsGroupID switchPortStatsID

Column	Syntax	OID
switchPortStatsGroupIDmandatory The group ID of the switch module port being referenced. If the group is not present, or if there is no switch module installed in the group, GetRequests and SetRequests are rejected with an error-status of noSuchName(…	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.259.10.3.4.2.1.1.1
switchPortStatsIDmandatory The port ID of the switch module port being referenced. Port 1 is always the internal 100Mbps port. Port 2 is always the internal 10Mbps port. Port 3 is always the external port. Note that port 2 is inactive on medi…	Integer32 Constraints: range: 1-3	.1.3.6.1.4.1.52.259.10.3.4.2.1.1.2
switchPortReadableFramesmandatory The number of valid frames received by the port.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.259.10.3.4.2.1.1.3
switchPortReadableOctetsmandatory The number of octets (bytes) in all valid frames received by the port.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.259.10.3.4.2.1.1.4
switchPortFCSErrorsmandatory The number of valid-length frames received by the port that had FCS (frame check sequence) errors.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.259.10.3.4.2.1.1.5
switchPortAlignmentErrorsmandatory The number of valid-length frames received by the port that had alignment errors.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.259.10.3.4.2.1.1.6
switchPortFramesTooLongmandatory The number of frames received by the port that were longer than 1518 bytes.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.259.10.3.4.2.1.1.7
switchPortShortEventsmandatory The number of frames received by the port that were shorter than 82 bits.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.259.10.3.4.2.1.1.8
switchPortRuntsmandatory The number of frames received by the port that were longer than 82 bits but shorter than 512 bits (64 bytes).	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.259.10.3.4.2.1.1.9
switchPortCollisionsmandatory The number of collisions detected on the port.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.259.10.3.4.2.1.1.10
switchPortLateEventsmandatory The number of collisions detected on the port that occurred later than 512 bit-times into the transmission of a packet.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.259.10.3.4.2.1.1.11
switchPortVeryLongEventsmandatory The number of times any activity continued for more than 4 to 7.5 milliseconds.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.259.10.3.4.2.1.1.12
switchPortDataRateMismatchesmandatory The number of times the incoming data rate mismatched the local clock source enough to cause a FIFO overflow or underflow.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.259.10.3.4.2.1.1.13
switchPortAutoPartitionsmandatory The number of times this port was auto-partitioned by the hardware. In 100Mbps mode, a port auto-partitions when it detects more than 60 consecutive collisions. In 10Mbps mode, a port auto-partitions after 32 consecut…	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.259.10.3.4.2.1.1.14
switchPortBroadcastPacketsmandatory The number of good broadcast frames received by the port.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.259.10.3.4.2.1.1.15
switchPortMulticastPacketsmandatory The number of good multicast (not broadcast) frames received by the port.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.259.10.3.4.2.1.1.16
switchPortIsolatesmandatory The number of times this port was auto-isolated by the hardware. This occurs only during 100Mbps operation. A port auto-isolates when it transmits more than 2 consecutive false carrier events.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.259.10.3.4.2.1.1.17

This table allows configuration of backup port pairs.

backupPortEntry row .1.3.6.1.4.1.52.259.10.3.5.1.1.1

Indexes

backupIndex

Column	Syntax	OID
backupIndexmandatory The index of the Backup table entry being referenced. Indexes may be nonconsecutive.	Integer32 Constraints: range: 1-72	.1.3.6.1.4.1.52.259.10.3.5.1.1.1.1
backupPriPortGroupmandatory Group ID of the primary port. Attempts to set this object to a nonexistent group are rejected with an error-status of badValue(3). If this object belongs to an empty entry, it returns a value of 255.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.259.10.3.5.1.1.1.2
backupPriPortPortmandatory Port number of the primary port. Attempts to set this object to a nonexistent port are rejected with an error-status of badValue(3). If this object belongs to an empty entry, it returns a value of 255.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.259.10.3.5.1.1.1.3
backupSecPortGroupmandatory Group ID of the secondary port. The secondary port may be on any group in the stack. Attempts to set this object to a nonexistent unit are rejected with an error-status of badValue(3). If this object belongs to an em…	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.259.10.3.5.1.1.1.4
backupSecPortPortmandatory Port number of the secondary port. Attempts to set this object to a nonexistent port are rejected with an error-status of badValue(3). If this object belongs to an empty entry, it returns a value of 255.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.259.10.3.5.1.1.1.5
backupPortActionmandatory The status of backup port monitoring for this port pair. Setting this object to active(2) enables the primary port, disables the secondary port, and activates backup port monitoring. Once backup port mon…	Enumerationr/w Enumerated Values: 1 inactive 2 active 3 standby 4 backup 5 invalid 6 delete	.1.3.6.1.4.1.52.259.10.3.5.1.1.1.6

This table allows configuration of port-level intrusion detection.

securityEntry row .1.3.6.1.4.1.52.259.10.3.6.1.1.1

Indexes

securityGroupID securityPortID

Column	Syntax	OID
securityGroupIDmandatory The group ID of the port being referenced. Groups are numbered in top-down order, with the top group being group 1. Attempts to reference nonexistent units are rejected with an error-status of noSuchName(2).	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.259.10.3.6.1.1.1.1
securityPortIDmandatory The port ID of the port being referenced. Attempts to reference nonexistent ports are rejected with an error-status of noSuchName(2).	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.259.10.3.6.1.1.1.2
securityAddrmandatory The authorized MAC address for this port. This address may be configured through auto-learning if securityAutoLearnAction is set to active(2). Otherwise, the authorized MAC address may be configured by a SetRequest on …	RFC1213-MIBPhysAddressr/w	.1.3.6.1.4.1.52.259.10.3.6.1.1.1.3
securityAutoLearnActionmandatory Selects the auto-learning function for the port. Setting this object to inactive(1) disables auto-learning; the user must set securityAddr in order to specify the authorized MAC address. Setting this obje…	Enumerationr/w Enumerated Values: 1 inactive 2 active 3 learned	.1.3.6.1.4.1.52.259.10.3.6.1.1.1.4
securityEnablemandatory Setting this object to warningAndDisable(2) enables intrusion detection on the port. When an intruder is detected, a RFC2108 rptrInfoHealth trap is transmitted and the port is disabled. An intruder is detected only af…	Enumerationr/w Enumerated Values: 1 inactive 2 warningAndDisable	.1.3.6.1.4.1.52.259.10.3.6.1.1.1.5