ELECTROLINE-DHT-TEST-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view

Tables

Rows

Columns

currentAnalogValueTable

table

.1.3.6.1.4.1.5802.1.3.1.2.4.1.1.1 · 1 row entry · 3 columns

Open in standard view

Uses the electroline variant from /opt/observium/mibs/electroline.

Command help

Walk currentAnalogValueTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ELECTROLINE-DHT-TEST-MIB' -M '/opt/observium/mibs/electroline:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ELECTROLINE-DHT-TEST-MIB::currentAnalogValueTable'

Provide Read access to Analog Ports

currentAnalogValueEntry row .1.3.6.1.4.1.5802.1.3.1.2.4.1.1.1.1

Analog port index and value

Indexes

analogPortId

Column	Syntax	OID
analogPortId Index into analog value table, all analog ports are enumerated together starting at zero.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.5802.1.3.1.2.4.1.1.1.1.1`
analogValue Returns the current value of the analog port. When calibrated, the displayed value is in the unit used for the calibration settings.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.5802.1.3.1.2.4.1.1.1.1.2`
analogPortIdDesc Returns the name of the current PortId	OctetString	`.1.3.6.1.4.1.5802.1.3.1.2.4.1.1.1.1.3`

currentCalibrationValueTable

table

.1.3.6.1.4.1.5802.1.3.1.2.4.1.1.6 · 1 row entry · 4 columns

Open in standard view

Uses the electroline variant from /opt/observium/mibs/electroline.

Command help

Walk currentCalibrationValueTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ELECTROLINE-DHT-TEST-MIB' -M '/opt/observium/mibs/electroline:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ELECTROLINE-DHT-TEST-MIB::currentCalibrationValueTable'

Provides Read access to Analog Calibration Table.

currentCalibrationValueEntry row .1.3.6.1.4.1.5802.1.3.1.2.4.1.1.6.1

Displays the stored analog calibration table content.

Indexes

analogCalibrationPortId

Column	Syntax	OID
analogCalibrationPortId Index into analog value table. Each analog port has an entry in the calibration table.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.5802.1.3.1.2.4.1.1.6.1.1`
rawValue Returns a rawValue that corresponds to the calibrated value.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.5802.1.3.1.2.4.1.1.6.1.2`
calibratedValue Returns the real display value at calibration time.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.5802.1.3.1.2.4.1.1.6.1.3`
calibratedPortIdDesc Returns the name of the current PortId.	OctetString	`.1.3.6.1.4.1.5802.1.3.1.2.4.1.1.6.1.4`

currentDigitalStatusTable

table

.1.3.6.1.4.1.5802.1.3.1.2.4.1.2.1 · 1 row entry · 3 columns

Open in standard view

Uses the electroline variant from /opt/observium/mibs/electroline.

Command help

Walk currentDigitalStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ELECTROLINE-DHT-TEST-MIB' -M '/opt/observium/mibs/electroline:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ELECTROLINE-DHT-TEST-MIB::currentDigitalStatusTable'

Provides Read access to Digital Status (Input)Ports.

currentDigitalStatusEntry row .1.3.6.1.4.1.5802.1.3.1.2.4.1.2.1.1

Digital Status (Input) port index and value.

Indexes

statusPortId

Column	Syntax	OID
statusPortId Index into digital Status value table. All digital ports are enumerated together starting at zero.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.5802.1.3.1.2.4.1.2.1.1.1`
statusValue Current value of the port 0: Unknown state (read error) 1: OFF (Inactive) 2: ON (Active) Note that inverse polarity is taken into account.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.5802.1.3.1.2.4.1.2.1.1.2`
statusPortIdDesc Returns the name of the current PortId.	OctetString	`.1.3.6.1.4.1.5802.1.3.1.2.4.1.2.1.1.3`

currentDigitalControlTable

table

.1.3.6.1.4.1.5802.1.3.1.2.4.1.2.2 · 1 row entry · 3 columns

Open in standard view

Uses the electroline variant from /opt/observium/mibs/electroline.

Command help

Walk currentDigitalControlTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ELECTROLINE-DHT-TEST-MIB' -M '/opt/observium/mibs/electroline:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ELECTROLINE-DHT-TEST-MIB::currentDigitalControlTable'

Provides Read/Write access to Digital Control (output) Ports.

currentDigitalControlEntry row .1.3.6.1.4.1.5802.1.3.1.2.4.1.2.2.1

Digital Control (output) port index and value.

Indexes

controlPortId

Column	Syntax	OID
controlPortId Index into digital Control value table. All digital ports are enumerated together starting at zero.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.5802.1.3.1.2.4.1.2.2.1.1`
controlValue Current value of the digital port 0: Unknown state (Read Error) 1: OFF (Inactive) 2: ON (Active) Note that inverse polarity is taken into account.	SNMPv2-SMIInteger32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.5802.1.3.1.2.4.1.2.2.1.2`
controlPortIdDesc Gives the name of the current PortId	OctetString	`.1.3.6.1.4.1.5802.1.3.1.2.4.1.2.2.1.3`