EKINOPS-Pmc1008MP-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
95
Rows
95
Columns
500
.1.3.6.1.4.1.20044.47.2.2.1.48
·
1 row entry
·
11 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1008mpAlmsfpWarnDdmTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmc1008MP-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmc1008MP-MIB::pmc1008mpAlmsfpWarnDdmTable'
List of pmc1008mpAlmsfpWarnDdm Article
Row definition for the pmc1008mpAlmsfpWarnDdm
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmc1008mpAlmsfpWarnDdm
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.47.2.2.1.48.1.1 |
||||
|
Client SFP Tx Power Low Warning
:Warning indicating that the SFP output power of port is lower than the threshold value written in the SFP EEPROM <Condtype> TX_PW_LOW_WNG_1 <Probcause> transmitterFailure (56) <Ala… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.2.2.1.48.1.2 |
||||
|
Client SFP Tx Power High Warning
:Warning indicating that the SFP output power of port is higher than the threshold value written in the SFP EEPROM <Condtype> TX_PWR_HIGH_WNG_1 <Probcause> transmitterFailure (56) … |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.2.2.1.48.1.3 |
||||
|
Client SFP Bias Low Warning :Warning
indicating that the SFP laser bias current of port is lower than the threshold value written in the SFP EEPROM <Condtype> TX_BIAS_LOW_WNG_1 <Probcause> transmitterFailure (56) … |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.2.2.1.48.1.4 |
||||
|
Client SFP Bias High Warning :Warning
indicating that the SFP laser bias current of port is higher than the threshold value written in the SFP EEPROM <Condtype> TX_BIAS_HIGH_WNG_1 <Probcause> transmitterFailure (5… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.2.2.1.48.1.5 |
||||
|
Client SFP Power Supply Low Warning
:Warning indicating that the SFP power supply of port is lower than the threshold value written in the SFP EEPROM <Condtype> VCC_LOW_WNG_1 <Probcause> powerProblem (36) <Alarmty… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.2.2.1.48.1.6 |
||||
|
Client SFP Power Supply High Warning
:Warning indicating that the SFP power supply of port is higher than the threshold value written in the SFP EEPROM <Condtype> VCC_HIGH_WNG_1 <Probcause> powerProblem (36) <Alar… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.2.2.1.48.1.7 |
||||
|
Client SFP Temp Low Warning :Warning
indicating that the SFP temperature of port is lower than the threshold value written in the SFP EEPROM <Condtype> TEMP_LOW_WNG_1 <Probcause> temperatureUnacceptable (51) <Alarm… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.2.2.1.48.1.8 |
||||
|
Client SFP Temp High Warning :Warning
indicating that the SFP temperature of port is higher than the threshold value written in the SFP EEPROM <Condtype> TEMP_HIGH_WNG_1 <Probcause> temperatureUnacceptable (51) <Al… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.2.2.1.48.1.9 |
||||
|
Client SFP Rx Power Low Warning
:Warning indicating that the SFP input power of port is lower than the threshold value written in the SFP EEPROM <Condtype> RX_PWR_LOW_WNG_1 <Probcause> receiveFailure (41) <Alarmty… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.2.2.1.48.1.16 |
||||
|
Client SFP Rx Power High Warning
:Warning indicating that the SFP input power of port is higher than the threshold value written in the SFP EEPROM <Condtype> RX_PWR_HIGH_WNG_1 <Probcause> receiveFailure (41) <Alar… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.2.2.1.48.1.17 |
.1.3.6.1.4.1.20044.47.2.2.2.32
·
1 row entry
·
11 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1008mpAlmsfpAlmDdmTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmc1008MP-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmc1008MP-MIB::pmc1008mpAlmsfpAlmDdmTable'
List of pmc1008mpAlmsfpAlmDdm Article
Row definition for the pmc1008mpAlmsfpAlmDdm
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmc1008mpAlmsfpAlmDdm
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.47.2.2.2.32.1.1 |
||||
|
Client SFP Tx Power Low :Alarm
indicating that the SFP output power of port is lower than the threshold value written in the SFP EEPROM <Condtype> TX_PWR_LOW_ALA_1 <Probcause> transmitterFailure (56) <Alarmtype> e… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.2.2.2.32.1.2 |
||||
|
Client SFP Tx Power High :Alarm
indicating that the SFP output power of port is higher than the threshold value written in the SFP EEPROM <Condtype> TX_PWR_HIGH_ALA_1 <Probcause> transmitterFailure (56) <Alarmtype… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.2.2.2.32.1.3 |
||||
|
Client SFP Bias Low :Alarm indicating
that the SFP laser bias current of port is lower than the threshold value written in the SFP EEPROM <Condtype> TX_BIAS_LOW_ALA_1 <Probcause> transmitterFailure (56) <Alarmtype>… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.2.2.2.32.1.4 |
||||
|
Client SFP Bias High :Alarm indicating
that the SFP laser bias current of port is higher than the threshold value written in the SFP EEPROM <Condtype> TX_BIAS_HIGH_ALA_1 <Probcause> transmitterFailure (56) <Alarmty… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.2.2.2.32.1.5 |
||||
|
Client SFP Power Supply Low :Alarm
indicating that the SFP power supply of port is lower than the threshold value written in the SFP EEPROM <Condtype> VCC_LOW_ALA_1 <Probcause> powerProblem (36) <Alarmtype> equipm… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.2.2.2.32.1.6 |
||||
|
Client SFP Power Supply High :Alarm
indicating that the SFP power supply of port is higher than the threshold value written in the SFP EEPROM <Condtype> VCC_HIGH_ALA_1 <Probcause> powerProblem (36) <Alarmtype> equ… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.2.2.2.32.1.7 |
||||
|
Client SFP Temp Low :Alarm indicating
that the SFP temperature of port is lower than the threshold value written in the SFP EEPROM <Condtype> TEMP_LOW_ALA_1 <Probcause> temperatureUnacceptable (51) <Alarmtype> equi… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.2.2.2.32.1.8 |
||||
|
Client SFP Temp High :Alarm indicating
that the SFP temperature of port is higher than the threshold value written in the SFP EEPROM <Condtype> TEMP_HIGH_ALA_1 <Probcause> temperatureUnacceptable (51) <Alarmtype> e… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.2.2.2.32.1.9 |
||||
|
Client SFP Rx Power Low :Alarm
indicating that the SFP input power of port is lower than the threshold value written in the SFP EEPROM <Condtype> RX_PWR_LOW_ALA_1 <Probcause> receiveFailure (41) <Alarmtype> equipm… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.2.2.2.32.1.16 |
||||
|
Client SFP Rx Power High :Alarm
indicating that the SFP input power of port is higher than the threshold value written in the SFP EEPROM <Condtype> RX_PWR_HIGH_ALA_1 <Probcause> receiveFailure (41) <Alarmtype> equ… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.2.2.2.32.1.17 |
.1.3.6.1.4.1.20044.47.2.2.3.8
·
1 row entry
·
13 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1008mpAlmsynthAlmPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmc1008MP-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmc1008MP-MIB::pmc1008mpAlmsynthAlmPortTable'
List of pmc1008mpAlmsynthAlmPort Article
Row definition for the pmc1008mpAlmsynthAlmPort
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmc1008mpAlmsynthAlmPort
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.47.2.2.3.8.1.1 |
||||
|
Client SFP Absent :This OID indicates
that the SFP module is not present in the client port. <Help> This alarm indicates if the client transceiver is present. <Condtype> SFP_ABSENT_1 <Probcause> inputOutputDevice… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.2.2.3.8.1.2 |
||||
|
DDM Supported On Client SFP :This
OID indicates that the Client SFP module supports the Digital Diagnostic Monitoring function <Help> This status indicates if the client transceiver includes the DDM feature <Con… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.2.2.3.8.1.3 |
||||
|
Client HW Fail :This OID indicates
a failure on client port, most probably caused by a HW issue. <Condtype> HW_FAIL_ACC_1 <Probcause> equipmentMalfunction (16) <Alarmtype> synthesisAlarm (12) <Polarity> (2) |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.2.2.3.8.1.5 |
||||
|
Client SFP Laser Shutdown :This
OID indicates the Client SFP transmitter output is ON. <Help> This status indicates if the client transceiver laser is ON or OFF <Condtype> DW_LSD_1 <Probcause> other (1) <Alarmty… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.2.2.3.8.1.6 |
||||
|
Local Client Port In Service :This
OID indicates that the local Client port is In Service (1) or Out of Service (2) <Help> This status indicates if the local client port is in service <Condtype> CLIENT_LOCAL_OOS … |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.2.2.3.8.1.7 |
||||
|
Remote Client Port In Service
:This OID indicates that the remote Client port is In Service (1) or Out of Service (2) <Help> This status indicates if the remote client port is in service <Condtype> CLIENT_REMOTE… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.2.2.3.8.1.8 |
||||
|
Client AIS Inserted :This OID
indicates a CAIS has been inserted on the output client port. <Help> This status indicates if a Client Alarm Indication Signal is currently inserted on the client interface <Condtyp… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.2.2.3.8.1.9 |
||||
|
Warning On Client SFP DDM :This
OID indicates a warning is being received from the Client SFP DDM <Help> This alarm indicates if a DDM Warning has been detected on the client transceiver <Condtype> SFP_DDM_WARNI… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.2.2.3.8.1.10 |
||||
|
Alarm On Client SFP DDM :This
OID indicates an alarm is being received from the Client SFP DDM <Help> This alarm indicates if a DDM Alarm has been detected on the client transceiver <Condtype> SFP_DDM_ALM_1 <Pro… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.2.2.3.8.1.11 |
||||
|
Client Access Fail :This OID indicates
a failure on the Client port <Condtype> FAIL_ACC_1 <Probcause> equipmentMalfunction (16) <Alarmtype> synthesisAlarm (12) <Polarity> (2) |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.2.2.3.8.1.13 |
||||
|
Client Sink (Line1 Or Line2) :This
bit indicates the Client #n is active on receive side <Help> This status indicates whether the Client is extracted from Line 1 or Line 2. <Condtype> CLIENT_ACTIVE <Probcause> i… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.2.2.3.8.1.16 |
||||
|
Client Signal Fail Inserted :This
OID indicates a CSF has been inserted in the upstream client port. <Help> This status indicates if a Client Signal Fail is currently inserted on the line signal for this client … |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.2.2.3.8.1.17 |
.1.3.6.1.4.1.20044.47.2.2.3.16
·
1 row entry
·
3 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1008mpAlmaccessioAlmTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmc1008MP-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmc1008MP-MIB::pmc1008mpAlmaccessioAlmTable'
List of pmc1008mpAlmaccessioAlm Article
Row definition for the pmc1008mpAlmaccessioAlm
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmc1008mpAlmaccessioAlm
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.47.2.2.3.16.1.1 |
||||
|
Client SFP Tx Failed :This OID
indicates that the transmitter fails for the SFP plugged into the client port (this alarm reports the transmitter failure alarm generated by the SFPs) <Help> This alarm indicates i… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.2.2.3.16.1.2 |
||||
|
Client Input Loss Of Signal :This
OID indicates that no signal is present on the SFP of the client port <Help> This alarm indicates if an optical signal is detected on the client transceiver input <Condtype> UP_… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.2.2.3.16.1.5 |
.1.3.6.1.4.1.20044.47.2.2.3.72
·
1 row entry
·
5 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1008mpAlmmapperDeAlmTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmc1008MP-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmc1008MP-MIB::pmc1008mpAlmmapperDeAlmTable'
List of pmc1008mpAlmmapperDeAlm Article
Row definition for the pmc1008mpAlmmapperDeAlm
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmc1008mpAlmmapperDeAlm
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.47.2.2.3.72.1.1 |
||||
|
Client Loss Of Synchro :This OID
indicates the upstream client input port has lost synchronization on its decoder <Help> This alarms indicates if the input client signal is correctly synchronized with the decode… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.2.2.3.72.1.2 |
||||
|
Client Upstream Buffer Overload
:This OID indicates that the rate adaptation buffer for client port is in overload. <Help> This alarm indicates if there is a upstream FIFO overload for this client port <Condtype… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.2.2.3.72.1.11 |
||||
|
Client Signal Fail Detected :This
OID indicates that a CSF has been detected on client port in the downstream direction <Help> This alarm indicates if a Client Signal Fail has been detected in the incoming line… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.2.2.3.72.1.12 |
||||
|
Client Downstream Buffer Overload
:This OID indicates that the de-mapper buffer for client port is in overload. <Help> This alarm indicates if there is a downstream FIFO overload for this client port <Condtype> … |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.2.2.3.72.1.15 |
.1.3.6.1.4.1.20044.47.2.3.1.209
·
1 row entry
·
9 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1008mpAlmlineXfp1WarningsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmc1008MP-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmc1008MP-MIB::pmc1008mpAlmlineXfp1WarningsTable'
List of pmc1008mpAlmlineXfp1Warnings Article
Row definition for the pmc1008mpAlmlineXfp1Warnings
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmc1008mpAlmlineXfp1Warnings
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.47.2.3.1.209.1.1 |
||||
|
Line Optical Tx Power Low Warning
:Warning indicating that the XFP/OTX transmitter transmitter output power is lower than the threshold value written in the XFP/OTX EEPROM <Condtype> TX_POWER_LOW_WARNING_1 <Probca… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.2.3.1.209.1.2 |
||||
|
Line Optical Tx Power High Warning
:Warning indicating that the XFP/OTX transmitter transmitter output power is higher than the threshold value written in the XFP EEPROM <Condtype> TX_POWER_HIGH_WARNING_1 <Probcau… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.2.3.1.209.1.3 |
||||
|
Line Transceiver Bias Low Warning
:Warning indicating that the XFP/OTX transmitter laser bias current is lower than the threshold value written in the XFP/OTX EEPROM <Condtype> TX_BIAS_LOW_WARNING_1 <Probcause> tr… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.2.3.1.209.1.4 |
||||
|
Line Transceiver Bias High Warning
:Warning indicating that the XFP/OTX transmitter laser bias current is higher than the threshold value written in the XFP EEPROM <Condtype> TX_BIAS_HIGH_WARNING_1 <Probcause> tra… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.2.3.1.209.1.5 |
||||
|
Line Transceiver Temp Low Warning
:Warning indicating that the XFP/OTX temperature is lower than the threshold value written in the XFP/OTX EEPROM <Condtype> TEMP_LOW_WARNING_1 <Probcause> temperatureUnacceptable (… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.2.3.1.209.1.8 |
||||
|
Line Transceiver Temp High Warning
:Warning indicating that the XFP/OTX temperature is higher than the threshold value written in the XFP EEPROM <Condtype> TEMP_HIGH_WARNING_1 <Probcause> temperatureUnacceptable (… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.2.3.1.209.1.9 |
||||
|
Line Optical Rx Power Low Warning
:Warning indicating that the XFP received optical power is lower than the threshold value written in the XFP EEPROM <Condtype> RX_POWER_LOW_WARNING_1 <Probcause> receiveFailure (4… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.2.3.1.209.1.16 |
||||
|
Line Optical Rx Power High Warning
:Warning indicating that the XFP received optical power is higher than the threshold value written in the XFP EEPROM <Condtype> RX_POWER_HIGH_WARNING_1 <Probcause> receiveFailure … |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.2.3.1.209.1.17 |
.1.3.6.1.4.1.20044.47.2.3.1.225
·
1 row entry
·
5 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1008mpAlmlineOtx1TlhWarningsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmc1008MP-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmc1008MP-MIB::pmc1008mpAlmlineOtx1TlhWarningsTable'
List of pmc1008mpAlmlineOtx1TlhWarnings Article
Row definition for the pmc1008mpAlmlineOtx1TlhWarnings
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmc1008mpAlmlineOtx1TlhWarnings
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.47.2.3.1.225.1.1 |
||||
|
Line Modulator Aging High Warning
:Warning indicating the Line OTX TLH modulator aging is higher than the threshold written in the EEPROM <Condtype> LINE_MODULATOR_AGING_HIGH_WARNING_1 <Probcause> transmitterFailur… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.2.3.1.225.1.6 |
||||
|
Line OTX TLH Aging High Warning
:Warning indicating the Line OTX TLH aging is higher than the threshold written in the EEPROM <Condtype> LINE_AGING_HIGH_WARNING_1 <Probcause> transmitterFailure (56) <Alarmtype> eq… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.2.3.1.225.1.7 |
||||
|
Line Freq. Deviation High Warning
:Warning indicating the Line OTX TLH frequency deviation is higher than the threshold written in the EEPROM <Condtype> LINE_FREQ_DEV_HIGH_WARNING_1 <Probcause> transmitterFailure … |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.2.3.1.225.1.13 |
||||
|
Line Laser Temp. High Warning
:Warning indicating the Line OTX TLH laser temperature is higher than the threshold written in the EEPROM <Condtype> LINE_LASER_TEMP_HIGH_WARNING_1 <Probcause> temperatureUnacceptable … |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.2.3.1.225.1.15 |
pmc1008mpAlmdfrmBerTable
table.1.3.6.1.4.1.20044.47.2.3.2.129
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1008mpAlmdfrmBerTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmc1008MP-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmc1008MP-MIB::pmc1008mpAlmdfrmBerTable'
List of pmc1008mpAlmdfrmBer Article
Row definition for the pmc1008mpAlmdfrmBer
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmc1008mpAlmdfrmBer
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.47.2.3.2.129.1.1 |
||||
|
Custom Line Signal Degrade :This
OID indicates that the line input signal is DEGRADE. The assertion hysteresis can customized by the host <Condtype> LINE_SIGNAL_DEGRADE_1 <Probcause> degradedSignal (13) <Alarmtype… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.2.3.2.129.1.2 |
||||
|
Custom Line Signal Fail :This
OID indicates that the line input signal is FAIL. The assertion hysteresis can be customized by the host <Condtype> LINE_SIGNAL_FAIL_1 <Probcause> receiveFailure (41) <Alarmtype> inte… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.2.3.2.129.1.3 |
||||
|
Fixed Line Signal Degrade :This
OID indicates that the line input signal is DEGRADE. The assetion hysteresis is fixed to 10-8 (assertion) and 10-9 (de-assertion) <Condtype> LINE_DEGRADE_1 <Probcause> degradedSignal… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.2.3.2.129.1.6 |
.1.3.6.1.4.1.20044.47.2.3.2.208
·
1 row entry
·
9 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1008mpAlmlineXfp1AlarmTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmc1008MP-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmc1008MP-MIB::pmc1008mpAlmlineXfp1AlarmTable'
List of pmc1008mpAlmlineXfp1Alarm Article
Row definition for the pmc1008mpAlmlineXfp1Alarm
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmc1008mpAlmlineXfp1Alarm
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.47.2.3.2.208.1.1 |
||||
|
Line Optical Tx Power Low :Alarm
indicating that the XFP/OTX transmitter transmitter output power is lower than the threshold value written in the XFP/OTX EEPROM <Condtype> TX_POWER_LOW_ALARM_1 <Probcause> transmi… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.2.3.2.208.1.2 |
||||
|
Line Optical Tx Power High :Alarm
indicating that the XFP/OTX transmitter transmitter output power is higher than the threshold value written in the XFP EEPROM <Condtype> TX_POWER_HIGH_ALARM_1 <Probcause> transmitt… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.2.3.2.208.1.3 |
||||
|
Line Transceiver Bias Low :Alarm
indicating that the XFP/OTX transmitter laser bias current is lower than the threshold value written in the XFP/OTX EEPROM <Condtype> TX_BIAS_LOW_ALARM_1 <Probcause> transmitterFai… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.2.3.2.208.1.4 |
||||
|
Line Transceiver Bias High :Alarm
indicating that the XFP/OTX transmitter laser bias current is higher than the threshold value written in the XFP EEPROM <Condtype> TX_BIAS_HIGH_ALARM_1 <Probcause> transmitterFailu… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.2.3.2.208.1.5 |
||||
|
Line Transceiver Temp Low :Alarm
indicating that the XFP/OTX temperature is lower than the threshold value written in the XFP/OTX EEPROM <Condtype> TEMP_LOW_ALARM_1 <Probcause> temperatureUnacceptable (51) <Alarmty… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.2.3.2.208.1.8 |
||||
|
Line Transceiver Temp High :Alarm
indicating that the XFP/OTX temperature is higher than the threshold value written in the XFP EEPROM <Condtype> TEMP_HIGH_ALARM_1 <Probcause> temperatureUnacceptable (51) <Alarmtyp… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.2.3.2.208.1.9 |
||||
|
Line Optical Rx Power Low :Alarm
indicating that the XFP received optical power is lower than the threshold value written in the XFP EEPROM <Condtype> RX_POWER_LOW_ALARM_1 <Probcause> receiveFailure (41) <Alarmty… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.2.3.2.208.1.16 |
||||
|
Line Optical Rx Power High :Alarm
indicating that the XFP received optical power is higher than the threshold value written in the XFP EEPROM <Condtype> RX_POWER_HIGH_ALARM_1 <Probcause> receiveFailure (41) <Alarm… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.2.3.2.208.1.17 |
.1.3.6.1.4.1.20044.47.2.3.2.212
·
1 row entry
·
17 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1008mpAlmlineXfp1SupplyAlarmTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmc1008MP-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmc1008MP-MIB::pmc1008mpAlmlineXfp1SupplyAlarmTable'
List of pmc1008mpAlmlineXfp1SupplyAlarm Article
Row definition for the pmc1008mpAlmlineXfp1SupplyAlarm
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmc1008mpAlmlineXfp1SupplyAlarm
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.47.2.3.2.212.1.1 |
||||
|
VEE5 Power Supply Low :Alarm indicating
the XFP/OTX VEE5 power supply is lower than the threshold written in the EEPROM <Condtype> VEE5_LOW_ALARM_1 <Probcause> powerProblem (36) <Alarmtype> equipmentAlarm (5) <Pola… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.2.3.2.212.1.2 |
||||
|
VEE5 Power Supply High :Alarm
indicating the XFP/OTX VEE5 power supply is higher than the threshold written in the EEPROM <Condtype> VEE5_HIGH_ALARM_1 <Probcause> powerProblem (36) <Alarmtype> equipmentAlarm (5) <… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.2.3.2.212.1.3 |
||||
|
VCC2 Power Supply Low :Alarm indicating
the XFP/OTX VCC2 power supply is lower than the threshold written in the EEPROM <Condtype> VCC2_LOW_ALARM_1 <Probcause> powerProblem (36) <Alarmtype> equipmentAlarm (5) <Pola… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.2.3.2.212.1.4 |
||||
|
VCC2 Power Supply High :Alarm
indicating the XFP/OTX VCC2 power supply is higher than the threshold written in the EEPROM <Condtype> VCC2_HIGH_ALARM_1 <Probcause> powerProblem (36) <Alarmtype> equipmentAlarm (5) <… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.2.3.2.212.1.5 |
||||
|
VCC3 Power Supply Low :Alarm indicating
the XFP/OTX VCC3 power supply is lower than the threshold written in the EEPROM <Condtype> VCC3_LOW_ALARM_1 <Probcause> powerProblem (36) <Alarmtype> equipmentAlarm (5) <Pola… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.2.3.2.212.1.6 |
||||
|
VCC3 Power Supply High :Alarm
indicating the XFP/OTX VCC3 power supply is higher than the threshold written in the EEPROM <Condtype> VCC3_HIGH_ALARM_1 <Probcause> powerProblem (36) <Alarmtype> equipmentAlarm (5) <… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.2.3.2.212.1.7 |
||||
|
VCC5 Power Supply Low :Alarm indicating
the XFP/OTX VCC5 power supply is lower than the threshold written in the EEPROM <Condtype> VCC5_LOW_ALARM_1 <Probcause> powerProblem (36) <Alarmtype> equipmentAlarm (5) <Pola… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.2.3.2.212.1.8 |
||||
|
VCC5 Power Supply High :Alarm
indicating the XFP/OTX VCC5 power supply is higher than the threshold written in the EEPROM <Condtype> VCC5_HIGH_ALARM_1 <Probcause> powerProblem (36) <Alarmtype> equipmentAlarm (5) <… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.2.3.2.212.1.9 |
||||
|
VEE5 Power Supply Low Warning
:Warning indicating the XFP/OTX VEE5 power supply is lower than the threshold written in the EEPROM <Condtype> VEE5_LOW_WARNING_1 <Probcause> powerProblem (36) <Alarmtype> equipmentAla… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.2.3.2.212.1.10 |
||||
|
VEE5 Power Supply High Warning
:Warning indicating the XFP/OTX VEE5 power supply is higher than the threshold written in the EEPROM <Condtype> VEE5_HIGH_WARNING_1 <Probcause> powerProblem (36) <Alarmtype> equipmen… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.2.3.2.212.1.11 |
||||
|
VCC2 Power Supply Low Warning
:Warning indicating the XFP/OTX VCC2 power supply is lower than the threshold written in the EEPROM <Condtype> VCC2_LOW_WARNING_1 <Probcause> powerProblem (36) <Alarmtype> equipmentAla… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.2.3.2.212.1.12 |
||||
|
VCC2 Power Supply High Warning
:Warning indicating the XFP/OTX VCC2 power supply is higher than the threshold written in the EEPROM <Condtype> VCC2_HIGH_WARNING_1 <Probcause> powerProblem (36) <Alarmtype> equipmen… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.2.3.2.212.1.13 |
||||
|
VCC3 Power Supply Low Warning
:Warning indicating the XFP/OTX VCC3 power supply is lower than the threshold written in the EEPROM <Condtype> VCC3_LOW_WARNING_1 <Probcause> powerProblem (36) <Alarmtype> equipmentAla… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.2.3.2.212.1.14 |
||||
|
VCC3 Power Supply High Warning
:Warning indicating the XFP/OTX VCC3 power supply is higher than the threshold written in the EEPROM <Condtype> VCC3_HIGH_WARNING_1 <Probcause> powerProblem (36) <Alarmtype> equipmen… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.2.3.2.212.1.15 |
||||
|
VCC5 Power Supply Low Warning
:Warning indicating the XFP/OTX VCC5 power supply is lower than the threshold written in the EEPROM <Condtype> VCC5_LOW_WARNING_1 <Probcause> powerProblem (36) <Alarmtype> equipmentAla… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.2.3.2.212.1.16 |
||||
|
VCC5 Power Supply High Warning
:Warning indicating the XFP/OTX VCC5 power supply is higher than the threshold written in the EEPROM <Condtype> VCC5_HIGH_WARNING_1 <Probcause> powerProblem (36) <Alarmtype> equipmen… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.2.3.2.212.1.17 |
.1.3.6.1.4.1.20044.47.2.3.2.224
·
1 row entry
·
6 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1008mpAlmlineOtx1TlhAlarmsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmc1008MP-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmc1008MP-MIB::pmc1008mpAlmlineOtx1TlhAlarmsTable'
List of pmc1008mpAlmlineOtx1TlhAlarms Article
Row definition for the pmc1008mpAlmlineOtx1TlhAlarms
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmc1008mpAlmlineOtx1TlhAlarms
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.47.2.3.2.224.1.1 |
||||
|
Line Modulator Aging High Alarm
:Alarm indicating the Line OTX TLH modulator aging is higher than the threshold written in the EEPROM <Condtype> LINE_MODULATOR_AGING_HIGH_ALA_1 <Probcause> transmitterFailure (56) … |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.2.3.2.224.1.6 |
||||
|
Line OTX TLH Aging High Alarm
:Alarm indicating the Line OTX TLH aging is higher than the threshold written in the EEPROM <Condtype> LINE_AGING_HIGH_ALA_1 <Probcause> transmitterFailure (56) <Alarmtype> equipmentA… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.2.3.2.224.1.7 |
||||
|
CDR Not Ready :This OID indicates
the Clock Data Recovery unit is not yet initialized. <Help> This alarm indicates the Clock Data Recovery unit is not yet initialized. <Condtype> LINE_CDR_NOT_READY_1 <Probcause… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.2.3.2.224.1.10 |
||||
|
Line Freq. Deviation High Alarm
:Alarm indicating the Line OTX TLH frequency deviation is higher than the threshold written in the EEPROM <Condtype> LINE_FREQ_DEV_HIGH_ALA_1 <Probcause> transmitterFailure (56) <Al… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.2.3.2.224.1.13 |
||||
|
Line Laser Temp. High Alarm :Alarm
indicating the Line OTX TLH laser temperature is higher than the threshold written in the EEPROM <Condtype> LINE_LASER_TEMP_HIGH_ALA_1 <Probcause> temperatureUnacceptable (51) <A… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.2.3.2.224.1.15 |
.1.3.6.1.4.1.20044.47.2.3.3.7
·
1 row entry
·
11 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1008mpAlmsynthAlmLineTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmc1008MP-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmc1008MP-MIB::pmc1008mpAlmsynthAlmLineTable'
List of pmc1008mpAlmsynthAlmLine Article
Row definition for the pmc1008mpAlmsynthAlmLine
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmc1008mpAlmsynthAlmLine
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.47.2.3.3.7.1.1 |
||||
|
Line Optical Module Absent :This
OID indicates that the line optical interface (XFP or OTX) is not plugged in. <Help> This alarm indicates if the line transceiver is present. <Condtype> XFP_ABSENT <Probcause> in… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.2.3.3.7.1.2 |
||||
|
Line Optical Module Ready :This
OID indicates that the optical interface (XFP or OTX) is not operational. <Help> This status indicates if the line transceiver has been correctly initialized <Condtype> XFP_INIT_N… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.2.3.3.7.1.3 |
||||
|
Line Port HW Failure :This OID
indicates a failure on line port, most probably caused by a HW issue <Condtype> LINE_HW_FAIL <Probcause> equipmentMalfunction (16) <Alarmtype> synthesisAlarm (12) <Polarity> (2) |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.2.3.3.7.1.5 |
||||
|
Line Optical Module Laser Shutdown
:This OID indicates the line optical output power is on <Help> This status indicates if the line transceiver laser is ON or OFF <Condtype> XFP_TX_OFF <Probcause> other (1) <Alar… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.2.3.3.7.1.6 |
||||
|
Line Port In Service :This OID
indicates that the Line port is In Service (1) of Out or Service (2) <Help> This status indicates if the line port is in service <Condtype> LINE_LOCAL_OOS <Probcause> informational… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.2.3.3.7.1.7 |
||||
|
MS-RDI/L-RDI Inserted On Line
:This OID indicates an upstream MS-RDI/L-RDI has been inserted in the outgoing 10 Gb/s SDH/SONET signal. <Help> This status indicates if a MS-RDI/L-RDI is currently inserted on the… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.2.3.3.7.1.9 |
||||
|
Warning On Line Optical Module
DDM :This OID indicates a warning is present coming out of Line optical interface DDM <Help> This alarm indicates if a DDM Warning has been detected on the line transceiver <Condty… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.2.3.3.7.1.10 |
||||
|
Alarm On Line Optical Module DDM
:This OID indicates an alarm is present coming out of Line optical interface DDM <Help> This alarm indicates if a DDM Alarm has been detected on the line transceiver <Condtype> L… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.2.3.3.7.1.11 |
||||
|
Line Port Failure :This OID indicates
a failure on the line port <Condtype> LINE_FAIL <Probcause> equipmentMalfunction (16) <Alarmtype> synthesisAlarm (12) <Polarity> (2) |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.2.3.3.7.1.13 |
||||
|
Line Active :This bit indicates
the line #n is active on receive side <Help> This status indicates whether the line is active or standby. <Condtype> LINE_ACTIVE <Probcause> informationalStatus(1000) <Alarmtype> … |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.2.3.3.7.1.17 |
pmc1008mpAlmdfrmAlmTable
table.1.3.6.1.4.1.20044.47.2.3.3.128
·
1 row entry
·
5 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1008mpAlmdfrmAlmTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmc1008MP-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmc1008MP-MIB::pmc1008mpAlmdfrmAlmTable'
List of pmc1008mpAlmdfrmAlm Article
Row definition for the pmc1008mpAlmdfrmAlm
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmc1008mpAlmdfrmAlm
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.47.2.3.3.128.1.1 |
||||
|
MS-AIS/L-AIS Detected On Line
Input :This OID indicates that an MS-AIS has been detected on incoming OC-48c/STM-16c input signal <Help> This alarm indicates if there is a MS-AIS/L-AIS is detected on the line in… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.2.3.3.128.1.2 |
||||
|
MS-RDI/L-RDI Detected On Line
Input :This OID indicates that an MS-RDI has been detected on incoming OC-48c/STM-16c input signal <Help> This alarm indicates if there is a MS-RDI/L-RDI is detected on the line in… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.2.3.3.128.1.3 |
||||
|
SONET/SDH Line Out Of Frame :This
OID indicates that an Out Of Frame has been detected on incoming OC-48c/STM-16c input signal <Help> This alarm indicates if there is a Out of Frame is detected on the line inpu… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.2.3.3.128.1.4 |
||||
|
SONET/SDH Line Loss Of Frame :This
OID indicates that a Loss Of Frame has been detected on incoming OC-48c/STM-16c input signal <Help> This alarm indicates if there is a Loss of Frame is detected on the line in… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.2.3.3.128.1.5 |
.1.3.6.1.4.1.20044.47.2.3.3.133
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1008mpAlmlineSyncAlarmsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmc1008MP-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmc1008MP-MIB::pmc1008mpAlmlineSyncAlarmsTable'
List of pmc1008mpAlmlineSyncAlarms Article
Row definition for the pmc1008mpAlmlineSyncAlarms
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmc1008mpAlmlineSyncAlarms
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.47.2.3.3.133.1.1 |
||||
|
Downstream Clock Lock Error :This
OID indicates that the deserializer input 10 Gb/s clock recovery is not locked. <Condtype> DW_LOCKERR <Probcause> receiveFailure (41) <Alarmtype> equipmentAlarm (5) <Polarity> (2) |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.2.3.3.133.1.13 |
||||
|
Upstream Clock Lock Error :This
OID indicates that the serializer output 10 Gb/s clock multiplier unit is not locked. <Condtype> UP_LOCKERR <Probcause> receiveFailure (41) <Alarmtype> equipmentAlarm (5) <Polarity>… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.2.3.3.133.1.14 |
||||
|
Line Input Loss Of Signal :This
OID indicates a loss of signal on the 10 Gb/s input. <Help> This alarm indicates if an optical signal is detected on the line transceiver input <Condtype> DW_LOS <Probcause> recei… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.2.3.3.133.1.17 |
.1.3.6.1.4.1.20044.47.2.3.3.211
·
1 row entry
·
11 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1008mpAlmlineXfp1AlarmsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmc1008MP-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmc1008MP-MIB::pmc1008mpAlmlineXfp1AlarmsTable'
List of pmc1008mpAlmlineXfp1Alarms Article
Row definition for the pmc1008mpAlmlineXfp1Alarms
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmc1008mpAlmlineXfp1Alarms
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.47.2.3.3.211.1.1 |
||||
|
Line Optical Module Not Ready
:This OID indicates that the module is unable to determine correct data. <Help> This alarm indicates if the line transceiver is ready <Condtype> MOD_NR_1 <Probcause> receiveFailure … |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.2.3.3.211.1.3 |
||||
|
Line Optical Rx CDR Unlocked :This
OID indicates that a loss of lock on the receiving side CDR has been detected <Help> This alarm indicates if the Rx CDR is locked in the line transceiver <Condtype> RX_CDR_NOT_L… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.2.3.3.211.1.4 |
||||
|
Line Optical Rx Not Ready :This
OID indicates that a condition has arisen leading to invalid data on the receiving side. <Help> This alarm indicates if the Rx part of the line transceiver is ready <Condtype> RX_… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.2.3.3.211.1.6 |
||||
|
Line Optical Tx CDR Unlocked :This
OID indicates a loss of lock on the transmitting side CDR has been detected. <Help> This alarm indicates if the Tx CDR is locked in the line transceiver <Condtype> TX_CDR_NOT_LO… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.2.3.3.211.1.7 |
||||
|
Line Optical Tx Failure :This
OID indicates a fault condition on the laser detected by the safety syste <Help> This alarm indicates if the laser of the line transceiver is in fail condition <Condtype> TX_FAULT_1… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.2.3.3.211.1.8 |
||||
|
Line Optical Tx Not Ready :This
OID indicates a condition has arisen leading to invalid data on the transmitting side <Help> This alarm indicates if the Tx part of the line transceiver is ready <Condtype> TX_NR_… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.2.3.3.211.1.9 |
||||
|
DWDM Channel Not Acquired :This
OID indicates the transceiver didn't tune the DWDM Channel succesfully. <Help> This status indicates the transceiver has not tuned the DWDM Channel succesfully. <Condtype> CHANNEL… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.2.3.3.211.1.11 |
||||
|
Line Optical Tx Wavelength Unlocked
:This OID indicates that the wavelength error is exceeding the manufacturer tolerance <Help> This alarm indicates if the wavelenght of the line transceiver is locked <Condtype>… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.2.3.3.211.1.15 |
||||
|
Line Optical Tx Temp Regul Failed
:This OID indicates a failure on the TEC module <Help> This alarm indicates if the TEC of the line transceiver is in fail condition <Condtype> TEC_FAULT_1 <Probcause> transmitte… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.2.3.3.211.1.16 |
||||
|
Line Rx Photodiode Power Failed
:This OID indicates a failure on the APD power supply <Help> This alarm indicates if the APD power supply is in fail condition <Condtype> APD_SUPPLY_FAULT_1 <Probcause> receiverFa… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.2.3.3.211.1.17 |
.1.3.6.1.4.1.20044.47.3.2.16
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1008mpMesrtempMeasTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmc1008MP-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmc1008MP-MIB::pmc1008mpMesrtempMeasTable'
List of pmc1008mpMesrtempMeas Article
Row definition for the pmc1008mpMesrtempMeas
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the pmc1008mpMesrtempMeas
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.47.3.2.16.1.1 |
|
Client SFP Temperature :This OID
gives the temperature value of the SFP plugged in port, read from the DDM (Digital Diagnostic Monitoring) (Temperature = AV/256) (Unit = C) <Help> This measure gives the temperat… |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.20044.47.3.2.16.1.2 |
.1.3.6.1.4.1.20044.47.3.2.24
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1008mpMesrvoltMeasTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmc1008MP-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmc1008MP-MIB::pmc1008mpMesrvoltMeasTable'
List of pmc1008mpMesrvoltMeas Article
Row definition for the pmc1008mpMesrvoltMeas
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the pmc1008mpMesrvoltMeas
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.47.3.2.24.1.1 |
|
Client SFP Power Supply :This
OID gives the 3V3 voltage value of the SFP plugged into port, read from the DDM (Digital Diagnostic Monitoring) (Voltage = AV/10000) (Unit = V) <Help> This measure gives the 3V3 vol… |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.20044.47.3.2.24.1.2 |
.1.3.6.1.4.1.20044.47.3.2.32
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1008mpMesrbiasMeasTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmc1008MP-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmc1008MP-MIB::pmc1008mpMesrbiasMeasTable'
List of pmc1008mpMesrbiasMeas Article
Row definition for the pmc1008mpMesrbiasMeas
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the pmc1008mpMesrbiasMeas
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.47.3.2.32.1.1 |
|
Client SFP Laser Bias :This OID
gives the bias value of the SFP plugged into port, read from the DDM (Digital Diagnostic Monitoring) (Bias = AV/500) (Unit = mA) <Help> This measure gives the bias of the client … |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.20044.47.3.2.32.1.2 |
.1.3.6.1.4.1.20044.47.3.2.40
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1008mpMesrtxpwrMeasTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmc1008MP-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmc1008MP-MIB::pmc1008mpMesrtxpwrMeasTable'
List of pmc1008mpMesrtxpwrMeas Article
Row definition for the pmc1008mpMesrtxpwrMeas
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the pmc1008mpMesrtxpwrMeas
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.47.3.2.40.1.1 |
|
Client SFP Tx Power :This OID
gives the transmit power value of the SFP plugged into port, read from the DDM (Digital Diagnostic Monitoring) (Power = 10*log(AV)-40) (Unit = dBm) <Help> This measure gives the Tx… |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.20044.47.3.2.40.1.2 |
.1.3.6.1.4.1.20044.47.3.2.48
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1008mpMesrrxpwrMeasTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmc1008MP-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmc1008MP-MIB::pmc1008mpMesrrxpwrMeasTable'
List of pmc1008mpMesrrxpwrMeas Article
Row definition for the pmc1008mpMesrrxpwrMeas
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the pmc1008mpMesrrxpwrMeas
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.47.3.2.48.1.1 |
|
Client SFP Rx Power :This OID
gives the receive power value of the SFP plugged into port, read in the DDM (Digital Diagnostic Monitoring) (Power = 10*log(AV)-40) (Unit = dBm) <Help> This measure gives the Rx op… |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.20044.47.3.2.48.1.2 |
.1.3.6.1.4.1.20044.47.3.3.208
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1008mpMesrxfp1LxModTempMeasTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmc1008MP-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmc1008MP-MIB::pmc1008mpMesrxfp1LxModTempMeasTable'
List of pmc1008mpMesrxfp1LxModTempMeas Article
Row definition for the pmc1008mpMesrxfp1LxModTempMeas
table
table
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the pmc1008mpMesrxfp1LxModTempMeas
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.47.3.3.208.1.1 |
|
Line Optical Module Temperature
:This OID gives the temperature of the XFP or OTX plugged in line#n, read from the DDM (Digital Diagnostic Monitoring) (Temperature = AV/256) (Unit = C) <Help> This measure gives… |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.20044.47.3.3.208.1.2 |
.1.3.6.1.4.1.20044.47.3.3.209
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1008mpMesrxfp1ReservedTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmc1008MP-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmc1008MP-MIB::pmc1008mpMesrxfp1ReservedTable'
List of pmc1008mpMesrxfp1Reserved Article
Row definition for the pmc1008mpMesrxfp1Reserved
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
pmc1008mpMesrxfp1ReservedIndexdeprecated
Index definition for the pmc1008mpMesrxfp1Reserved
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.47.3.3.209.1.1 |
|
pmc1008mpMesrxfp1ReservedPortndeprecated
Not Used :Reserved
|
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.20044.47.3.3.209.1.2 |
.1.3.6.1.4.1.20044.47.3.3.210
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1008mpMesrxfp1LoBiasCurrentMeasTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmc1008MP-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmc1008MP-MIB::pmc1008mpMesrxfp1LoBiasCurrentMeasTable'
List of pmc1008mpMesrxfp1LoBiasCurrentMeas Article
Row definition for the pmc1008mpMesrxfp1LoBiasCurrentMeas
table
table
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the pmc1008mpMesrxfp1LoBiasCurrentMeas
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.47.3.3.210.1.1 |
|
Line Optical Module Laser Bias
:This OID gives the bias value of the XFP or OTX plugged in line #n, read from the DDM (Digital Diagnostic Monitoring) (Bias = AV/500) (Unit = mA) <Help> This measure gives the bia… |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.20044.47.3.3.210.1.2 |
.1.3.6.1.4.1.20044.47.3.3.211
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1008mpMesrxfp1LoTxPowerMeasTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmc1008MP-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmc1008MP-MIB::pmc1008mpMesrxfp1LoTxPowerMeasTable'
List of pmc1008mpMesrxfp1LoTxPowerMeas Article
Row definition for the pmc1008mpMesrxfp1LoTxPowerMeas
table
table
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the pmc1008mpMesrxfp1LoTxPowerMeas
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.47.3.3.211.1.1 |
|
Line Optical Module Tx Power :This
OID gives the transmit power value of the XFP or OTX plugged in line #n, read from the DDM (Digital Diagnostic Monitoring) (Power = 10*log(AV)-40) (Unit = dBm) <Help> This me… |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.20044.47.3.3.211.1.2 |
.1.3.6.1.4.1.20044.47.3.3.212
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1008mpMesrxfp1LiRxPowerMeasTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmc1008MP-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmc1008MP-MIB::pmc1008mpMesrxfp1LiRxPowerMeasTable'
List of pmc1008mpMesrxfp1LiRxPowerMeas Article
Row definition for the pmc1008mpMesrxfp1LiRxPowerMeas
table
table
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the pmc1008mpMesrxfp1LiRxPowerMeas
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.47.3.3.212.1.1 |
|
Line Optical Module Rx Power :This
OID gives the receive power value of the XFP or OTX plugged in line #n, read from the DDM (Digital Diagnostic Monitoring) (Power = 10*log(AV)-40) (Unit = dBm) <Help> This meas… |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.20044.47.3.3.212.1.2 |
.1.3.6.1.4.1.20044.47.3.3.213
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1008mpMesrxfp1LxAux1MeasTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmc1008MP-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmc1008MP-MIB::pmc1008mpMesrxfp1LxAux1MeasTable'
List of pmc1008mpMesrxfp1LxAux1Meas Article
Row definition for the pmc1008mpMesrxfp1LxAux1Meas
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
pmc1008mpMesrxfp1LxAux1MeasIndexdeprecated
Index definition for the pmc1008mpMesrxfp1LxAux1Meas
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.47.3.3.213.1.1 |
|
pmc1008mpMesrxfp1LxAux1MeasPortndeprecated
Not Used :This OID gives the receive
power value read in the DDM (Digital Diagnostic Monitoring) of the XFP or OTX plugged in line #n (Unit = ?) |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.20044.47.3.3.213.1.2 |
.1.3.6.1.4.1.20044.47.3.3.214
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1008mpMesrxfp1LxAux2MeasTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmc1008MP-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmc1008MP-MIB::pmc1008mpMesrxfp1LxAux2MeasTable'
List of pmc1008mpMesrxfp1LxAux2Meas Article
Row definition for the pmc1008mpMesrxfp1LxAux2Meas
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
pmc1008mpMesrxfp1LxAux2MeasIndexdeprecated
Index definition for the pmc1008mpMesrxfp1LxAux2Meas
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.47.3.3.214.1.1 |
|
pmc1008mpMesrxfp1LxAux2MeasPortndeprecated
Not Used :This OID gives the receive
power value read in the DDM (Digital Diagnostic Monitoring) of the XFP or OTX plugged in line #n (Unit = ?) |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.20044.47.3.3.214.1.2 |
.1.3.6.1.4.1.20044.47.3.3.224
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1008mpMesrotx1AgingTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmc1008MP-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmc1008MP-MIB::pmc1008mpMesrotx1AgingTable'
List of pmc1008mpMesrotx1Aging Article
Row definition for the pmc1008mpMesrotx1Aging
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the pmc1008mpMesrotx1Aging
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.47.3.3.224.1.1 |
|
Line OTX TLH Aging :This OID gives
the aging of the Line OTX TLH, read from the DDM (Digital Diagnostic Monitoring) (Aging = AV) (Unit = %) <Help> This measure gives the aging of the Line OTX TLH |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.20044.47.3.3.224.1.2 |
.1.3.6.1.4.1.20044.47.3.3.225
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1008mpMesrotx1LaserTemperatureTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmc1008MP-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmc1008MP-MIB::pmc1008mpMesrotx1LaserTemperatureTable'
List of pmc1008mpMesrotx1LaserTemperature Article
Row definition for the pmc1008mpMesrotx1LaserTemperature
table
table
| Column | Syntax | OID |
|---|---|---|
|
pmc1008mpMesrotx1LaserTemperatureIndexdeprecated
Index definition for the pmc1008mpMesrotx1LaserTemperature
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.47.3.3.225.1.1 |
|
pmc1008mpMesrotx1LaserTemperaturePortndeprecated
Line OTX TLH Laser Temperature
:This OID gives the laser temperature of the Line OTX TLH, read from the DDM (Digital Diagnostic Monitoring) (Temperature = AV/256) (Unit = C) <Help> This measure gives the laser t… |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.20044.47.3.3.225.1.2 |
.1.3.6.1.4.1.20044.47.3.3.226
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1008mpMesrotx1FreqDeviationTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmc1008MP-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmc1008MP-MIB::pmc1008mpMesrotx1FreqDeviationTable'
List of pmc1008mpMesrotx1FreqDeviation Article
Row definition for the pmc1008mpMesrotx1FreqDeviation
table
table
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the pmc1008mpMesrotx1FreqDeviation
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.47.3.3.226.1.1 |
|
Line OTX TLH Frequency Deviation
:This OID gives the frequency deviation of the Line OTX TLH, read from the DDM (Digital Diagnostic Monitoring) (Deviation = (AV-32768)*100) (Unit = MHz) <Help> This measure gives … |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.20044.47.3.3.226.1.2 |
.1.3.6.1.4.1.20044.47.3.3.227
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1008mpMesrotx1LaserWvlengthTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmc1008MP-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmc1008MP-MIB::pmc1008mpMesrotx1LaserWvlengthTable'
List of pmc1008mpMesrotx1LaserWvlength Article
Row definition for the pmc1008mpMesrotx1LaserWvlength
table
table
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the pmc1008mpMesrotx1LaserWvlength
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.47.3.3.227.1.1 |
|
Line Optical Module Wavelength
:This OID gives the laser wavelength of the Line OTX TLH, read from the DDM (Digital Diagnostic Monitoring) (Wavelength=299792458/((193,100+(AV-32768 )*12,5)*10 3)) (Unit = nm) <Help… |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.20044.47.3.3.227.1.2 |
.1.3.6.1.4.1.20044.47.4.2.16
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1008mpCntupRaRemCntTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmc1008MP-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmc1008MP-MIB::pmc1008mpCntupRaRemCntTable'
List of pmc1008mpCntupRaRemCnt Article
Row definition for the pmc1008mpCntupRaRemCnt
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmc1008mpCntupRaRemCnt
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.47.4.2.16.1.1 |
||||
|
Client Rate Adapt. Words Removal
:This counter is incremented each time a rate adaptation 10B word is removed from the Client input stream |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.47.4.2.16.1.2 |
||||
|
Client Counter Error :This OID
when set indicates the rate adaptation removal counter value is invalid on Port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.4.2.16.1.3 |
||||
|
Client Counter Overload :This
OID when set indicates a rate adaptation removal counter overload on Port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.4.2.16.1.4 |
.1.3.6.1.4.1.20044.47.4.2.24
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1008mpCntupRaInsCntTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmc1008MP-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmc1008MP-MIB::pmc1008mpCntupRaInsCntTable'
List of pmc1008mpCntupRaInsCnt Article
Row definition for the pmc1008mpCntupRaInsCnt
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmc1008mpCntupRaInsCnt
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.47.4.2.24.1.1 |
||||
|
Client Rate Adapt. Words Insertion
:This counter is incremented each time a rate adaptation 10B word is inserted in the Client input stream |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.47.4.2.24.1.2 |
||||
|
Client Counter Error :This OID
when set indicates the rate adaptation insertion counter value is invalid on Port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.4.2.24.1.3 |
||||
|
Client Counter Overload :This
OID when set indicates a rate adaptation insertion counter overload on Port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.4.2.24.1.4 |
.1.3.6.1.4.1.20044.47.4.2.32
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1008mpCntupRdErrCntTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmc1008MP-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmc1008MP-MIB::pmc1008mpCntupRdErrCntTable'
List of pmc1008mpCntupRdErrCnt Article
Row definition for the pmc1008mpCntupRdErrCnt
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmc1008mpCntupRdErrCnt
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.47.4.2.32.1.1 |
||||
|
Client Input Errors :This counter
is increased each time a 10b/8b running disparity error is detected on the Client input stream <Help> This counter gives the number of 10b/8b running disparity errors on the cli… |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.47.4.2.32.1.2 |
||||
|
Client Counter Error :This OID
when set indicates the client error counter value is invalid on Port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.4.2.32.1.3 |
||||
|
Client Counter Overload :This
OID when set indicates a client input error counter overload on Port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.4.2.32.1.4 |
.1.3.6.1.4.1.20044.47.4.2.40
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1008mpCntupTimCntTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmc1008MP-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmc1008MP-MIB::pmc1008mpCntupTimCntTable'
List of pmc1008mpCntupTimCnt Article
Row definition for the pmc1008mpCntupTimCnt
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmc1008mpCntupTimCnt
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.47.4.2.40.1.1 |
||||
|
Client Upstream Timer Counter
:This is the timing counter dedicated to the upstream access counters. It is incremented every 125 us. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.47.4.2.40.1.2 |
||||
|
Client Counter Error :This OID
when set indicates the upstream timing counter value is invalid on Port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.4.2.40.1.3 |
||||
|
Client Counter Overload :This
OID when set indicates a upstream timing counter overload on Port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.4.2.40.1.4 |
.1.3.6.1.4.1.20044.47.4.2.48
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1008mpCntupCvErrCntTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmc1008MP-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmc1008MP-MIB::pmc1008mpCntupCvErrCntTable'
List of pmc1008mpCntupCvErrCnt Article
Row definition for the pmc1008mpCntupCvErrCnt
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmc1008mpCntupCvErrCnt
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.47.4.2.48.1.1 |
||||
|
Client Coding Violation Counter
:This counter is increased each time a 10b/8b coding violation is detected on the Client input stream |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.47.4.2.48.1.2 |
||||
|
Client Counter Error :This OID
when set indicates the coding violation counter value is invalid on Port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.4.2.48.1.3 |
||||
|
Client Counter Overload :This
OID when set indicates a coding violation counter overload on Port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.4.2.48.1.4 |
.1.3.6.1.4.1.20044.47.4.2.64
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1008mpCntdwCbipCntTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmc1008MP-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmc1008MP-MIB::pmc1008mpCntdwCbipCntTable'
List of pmc1008mpCntdwCbipCnt Article
Row definition for the pmc1008mpCntdwCbipCnt
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmc1008mpCntdwCbipCnt
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.47.4.2.64.1.1 |
||||
|
Client Output Errors :This counter
is incremented each time a CBIP parity error is detected on the Client output stream <Help> This counter gives the number of CBIP errors on the client port |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.47.4.2.64.1.2 |
||||
|
Client Counter Error :This OID
when set indicates the CBIP error counter value is invalid on Port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.4.2.64.1.3 |
||||
|
Client CBIP Counter Overload :This
OID when set indicates a CBIP error counter overload on Port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.4.2.64.1.4 |
.1.3.6.1.4.1.20044.47.4.2.72
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1008mpCntdwTimCntTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmc1008MP-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmc1008MP-MIB::pmc1008mpCntdwTimCntTable'
List of pmc1008mpCntdwTimCnt Article
Row definition for the pmc1008mpCntdwTimCnt
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmc1008mpCntdwTimCnt
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.47.4.2.72.1.1 |
||||
|
Client Downstream Timer Counter
:This is the timing counter dedicated to the downstream access counters. It is incremented every 125 us. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.47.4.2.72.1.2 |
||||
|
Client Counter Error :This OID
when set indicates the downstream timer counter value is invalid on Port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.4.2.72.1.3 |
||||
|
Client Counter Overload :This
OID when set indicates a downstream timer counter overload on Port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.4.2.72.1.4 |
.1.3.6.1.4.1.20044.47.4.3.152
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1008mpCntdfrmB1ErrCntTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmc1008MP-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmc1008MP-MIB::pmc1008mpCntdfrmB1ErrCntTable'
List of pmc1008mpCntdfrmB1ErrCnt Article
Row definition for the pmc1008mpCntdfrmB1ErrCnt
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmc1008mpCntdfrmB1ErrCnt
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.47.4.3.152.1.1 |
||||
|
Line Input B1 Errors :This counter
is incremented each time a B1 error is detected on the Deframer input stream. <Help> This counter gives the number of B1 errors on the line port |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.47.4.3.152.1.2 |
||||
|
Line Counter Error :This OID when
set indicates the B1 error counter value is invalid on Port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.4.3.152.1.3 |
||||
|
Line Counter Overload :This OID
when set indicates a B1 error counter overload on Port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.4.3.152.1.4 |
.1.3.6.1.4.1.20044.47.4.3.153
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1008mpCntdfrmTimCntTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmc1008MP-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmc1008MP-MIB::pmc1008mpCntdfrmTimCntTable'
List of pmc1008mpCntdfrmTimCnt Article
Row definition for the pmc1008mpCntdfrmTimCnt
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmc1008mpCntdfrmTimCnt
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.47.4.3.153.1.1 |
||||
|
Line Timer Counter :This is the
timing counter dedicated to the downstream deframer counters. It is incremented every 125 us. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.47.4.3.153.1.2 |
||||
|
Line Counter Error :This OID when
set indicates the deframer timer counter value is invalid on Port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.4.3.153.1.3 |
||||
|
Line Counter Overload :This OID
when set indicates a deframer timer counter overload on Port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.4.3.153.1.4 |
.1.3.6.1.4.1.20044.47.4.3.154
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1008mpCntdfrmPrimLineErrCntTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmc1008MP-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmc1008MP-MIB::pmc1008mpCntdfrmPrimLineErrCntTable'
List of pmc1008mpCntdfrmPrimLineErrCnt Article
Row definition for the pmc1008mpCntdfrmPrimLineErrCnt
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmc1008mpCntdfrmPrimLineErrCnt
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.47.4.3.154.1.1 |
||||
|
Line Input FEC Corrected Errors
:This counter is incremented each time the FEC is correcting an error on the line input stream. <Help> This counter gives the number of errors corrected by the FEC on the line port |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.47.4.3.154.1.2 |
||||
|
FEC Counter Error :This bit when
set indicates the FEC corrected errors counter value is invalid on Line |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.4.3.154.1.3 |
||||
|
FEC Counter Overload :This bit
when set indicates a FEC corrected errors counter overload on Line |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.4.3.154.1.4 |
.1.3.6.1.4.1.20044.47.6.2.16
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1008mpCtrlaccessLoopTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmc1008MP-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmc1008MP-MIB::pmc1008mpCtrlaccessLoopTable'
List of pmc1008mpCtrlaccessLoop Article
Row definition for the pmc1008mpCtrlaccessLoop
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmc1008mpCtrlaccessLoop
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.47.6.2.16.1.1 |
||||
|
Client Facility Loopback :This
OID operates a Client Facility Loopback, looping client input signal on the client output port. The loop is located on the client transceiver <Help> This maintenance parameter opera… |
EKINOPS-MIBEkiStater/w Type Values:
|
.1.3.6.1.4.1.20044.47.6.2.16.1.2 |
.1.3.6.1.4.1.20044.47.6.2.18
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1008mpCtrlportOosModeTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmc1008MP-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmc1008MP-MIB::pmc1008mpCtrlportOosModeTable'
List of pmc1008mpCtrlportOosMode Article
Row definition for the pmc1008mpCtrlportOosMode
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmc1008mpCtrlportOosMode
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.47.6.2.18.1.1 |
||||
|
Client Port Out Of Service :This
OID sets the client port Out Of Service <Help> This controls defines the service state of the client port |
EKINOPS-MIBEkiStater/w Type Values:
|
.1.3.6.1.4.1.20044.47.6.2.18.1.2 |
.1.3.6.1.4.1.20044.47.6.2.19
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1008mpCtrlsfpOnCtrlTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmc1008MP-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmc1008MP-MIB::pmc1008mpCtrlsfpOnCtrlTable'
List of pmc1008mpCtrlsfpOnCtrl Article
Row definition for the pmc1008mpCtrlsfpOnCtrl
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmc1008mpCtrlsfpOnCtrl
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.47.6.2.19.1.1 |
||||
|
Client SFP Optical Laser ON :This
OID switches on the SFP. |
EKINOPS-MIBEkiStater/w Type Values:
|
.1.3.6.1.4.1.20044.47.6.2.19.1.2 |
.1.3.6.1.4.1.20044.47.6.2.20
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1008mpCtrlsfpOffCtrlTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmc1008MP-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmc1008MP-MIB::pmc1008mpCtrlsfpOffCtrlTable'
List of pmc1008mpCtrlsfpOffCtrl Article
Row definition for the pmc1008mpCtrlsfpOffCtrl
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmc1008mpCtrlsfpOffCtrl
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.47.6.2.20.1.1 |
||||
|
Client SFP Optical Laser OFF :This
OID switches off the SFP. <Help> This control defines the laser state of the client transceiver |
EKINOPS-MIBEkiStater/w Type Values:
|
.1.3.6.1.4.1.20044.47.6.2.20.1.2 |
.1.3.6.1.4.1.20044.47.6.2.21
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1008mpCtrlcsfUpInsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmc1008MP-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmc1008MP-MIB::pmc1008mpCtrlcsfUpInsTable'
List of pmc1008mpCtrlcsfUpIns Article
Row definition for the pmc1008mpCtrlcsfUpIns
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmc1008mpCtrlcsfUpIns
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.47.6.2.21.1.1 |
||||
|
Client Signal Fail Insertion :This
OID, when set, inserts a client signal fail in the upstream client Port. <Help> This control inserts a Client Signal Fail for the client port |
EKINOPS-MIBEkiStater/w Type Values:
|
.1.3.6.1.4.1.20044.47.6.2.21.1.2 |
.1.3.6.1.4.1.20044.47.6.2.22
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1008mpCtrlcaisDwInsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmc1008MP-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmc1008MP-MIB::pmc1008mpCtrlcaisDwInsTable'
List of pmc1008mpCtrlcaisDwIns Article
Row definition for the pmc1008mpCtrlcaisDwIns
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmc1008mpCtrlcaisDwIns
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.47.6.2.22.1.1 |
||||
|
Client AIS Insertion :This OID,
when set, inserts a client AIS on the downstream client Port. <Help> This control inserts a Client AIS for the client port |
EKINOPS-MIBEkiStater/w Type Values:
|
.1.3.6.1.4.1.20044.47.6.2.22.1.2 |
.1.3.6.1.4.1.20044.47.6.2.26
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1008mpCtrlclientAccessTermLoopTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmc1008MP-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmc1008MP-MIB::pmc1008mpCtrlclientAccessTermLoopTable'
List of pmc1008mpCtrlclientAccessTermLoop Article
Row definition for the pmc1008mpCtrlclientAccessTermLoop
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmc1008mpCtrlclientAccessTermLoop
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.47.6.2.26.1.1 |
||||
|
Client Terminal Loopback :This
OID operates a Client Terminal Loopback, looping client input signal on the client output port. The loop is located on the line transceiver <Help> This maintenance parameter operate… |
EKINOPS-MIBEkiStater/w Type Values:
|
.1.3.6.1.4.1.20044.47.6.2.26.1.2 |
.1.3.6.1.4.1.20044.47.6.2.48
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1008mpCtrlprotocolTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmc1008MP-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmc1008MP-MIB::pmc1008mpCtrlprotocolTable'
List of pmc1008mpCtrlprotocol Article
Row definition for the pmc1008mpCtrlprotocol
table
table
Indexes
| Column | Syntax | OID | ||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Index definition for the pmc1008mpCtrlprotocol
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.47.6.2.48.1.1 |
||||||||||||||||||||||||||
|
Protocol used for client port:
This OID sets the protocol of the Client port. |
EKINOPS-MIBEkiProtocolr/w Type Values:
|
.1.3.6.1.4.1.20044.47.6.2.48.1.2 |
.1.3.6.1.4.1.20044.47.6.2.128
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1008mpCtrladddropTsClientARxProtectTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmc1008MP-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmc1008MP-MIB::pmc1008mpCtrladddropTsClientARxProtectTable'
List of pmc1008mpCtrladddropTsClientARxProtect Article
Row definition for the pmc1008mpCtrladddropTsClientARxProtect
table
table
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
Index definition for the pmc1008mpCtrladddropTsClientARxProtect
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.47.6.2.128.1.1 |
||||||
|
Client A Switch Mode :This bit
selects the manual (1) or automatic (0) switch method <Help> This control defines the protection switch mode on the client interface |
Pmc1008mpProtectionTimeSlotr/w Type Values:
Description: protection for control |
.1.3.6.1.4.1.20044.47.6.2.128.1.2 |
.1.3.6.1.4.1.20044.47.6.2.136
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1008mpCtrladddropTsPairModeTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmc1008MP-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmc1008MP-MIB::pmc1008mpCtrladddropTsPairModeTable'
List of pmc1008mpCtrladddropTsPairMode Article
Row definition for the pmc1008mpCtrladddropTsPairMode
table
table
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Index definition for the pmc1008mpCtrladddropTsPairMode
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.47.6.2.136.1.1 |
||||||||||||
|
TS Group Mode :This OID selects
the mode on the group of clients <Help> This control defines the mode (Add/Drop or Split&Select) of two consecutive Client (1/2 , 3/4 , 5/6 , 7/8) |
Pmc1008mpModeTimeSlotr/w Type Values:
Description: different mode for time slot |
.1.3.6.1.4.1.20044.47.6.2.136.1.2 |
.1.3.6.1.4.1.20044.47.6.2.271
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1008mpCtrlclientResetAllCountTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmc1008MP-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmc1008MP-MIB::pmc1008mpCtrlclientResetAllCountTable'
List of pmc1008mpCtrlclientResetAllCount Article
Row definition for the pmc1008mpCtrlclientResetAllCount
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmc1008mpCtrlclientResetAllCount
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.47.6.2.271.1.1 |
||||
|
Client Counters Reset :This OID
resets every counter on the client port <Help> This control operates a reset on the statistics current ,previous and history client port counters |
EKINOPS-MIBEkiStater/w Type Values:
|
.1.3.6.1.4.1.20044.47.6.2.271.1.2 |
.1.3.6.1.4.1.20044.47.6.3.69
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1008mpCtrlfecDisableTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmc1008MP-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmc1008MP-MIB::pmc1008mpCtrlfecDisableTable'
List of pmc1008mpCtrlfecDisable Article
Row definition for the pmc1008mpCtrlfecDisable
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmc1008mpCtrlfecDisable
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.47.6.3.69.1.1 |
||||
|
Forward Error Correction Inhibition
:This OID, when set, inhibits the Forward Error Correction feature on the line input <Help> This control enables/disables the Forward Error Correction on the line interface |
EKINOPS-MIBEkiStater/w Type Values:
|
.1.3.6.1.4.1.20044.47.6.3.69.1.2 |
.1.3.6.1.4.1.20044.47.6.3.74
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1008mpCtrllineOosModeTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmc1008MP-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmc1008MP-MIB::pmc1008mpCtrllineOosModeTable'
List of pmc1008mpCtrllineOosMode Article
Row definition for the pmc1008mpCtrllineOosMode
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmc1008mpCtrllineOosMode
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.47.6.3.74.1.1 |
||||
|
Line Port Out Of Service :This
OID sets the line port Out Of Service <Help> This control defines the service state of the line port |
EKINOPS-MIBEkiStater/w Type Values:
|
.1.3.6.1.4.1.20044.47.6.3.74.1.2 |
.1.3.6.1.4.1.20044.47.6.3.208
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1008mpCtrlxfpOnoffTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmc1008MP-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmc1008MP-MIB::pmc1008mpCtrlxfpOnoffTable'
List of pmc1008mpCtrlxfpOnoff Article
Row definition for the pmc1008mpCtrlxfpOnoff
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmc1008mpCtrlxfpOnoff
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.47.6.3.208.1.1 |
||||
|
XFP/OTX Optical Laser OFF :This
OID switches off the XFP or the OTX <Help> This control defines the laser state of the line transceiver |
EKINOPS-MIBEkiStater/w Type Values:
|
.1.3.6.1.4.1.20044.47.6.3.208.1.2 |
.1.3.6.1.4.1.20044.47.6.3.209
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1008mpCtrlxfpLineLoopTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmc1008MP-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmc1008MP-MIB::pmc1008mpCtrlxfpLineLoopTable'
List of pmc1008mpCtrlxfpLineLoop Article
Row definition for the pmc1008mpCtrlxfpLineLoop
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmc1008mpCtrlxfpLineLoop
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.47.6.3.209.1.1 |
||||
|
Line XFP/OTX Loop :This OID operates
a line loopback on the XFP or the OTX <Help> This control defines the line loop back of the line transceiver |
EKINOPS-MIBEkiStater/w Type Values:
|
.1.3.6.1.4.1.20044.47.6.3.209.1.2 |
.1.3.6.1.4.1.20044.47.6.3.210
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1008mpCtrlxfpXfiLoopTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmc1008MP-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmc1008MP-MIB::pmc1008mpCtrlxfpXfiLoopTable'
List of pmc1008mpCtrlxfpXfiLoop Article
Row definition for the pmc1008mpCtrlxfpXfiLoop
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmc1008mpCtrlxfpXfiLoop
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.47.6.3.210.1.1 |
||||
|
Line XFP/OTX XFI Loop :This OID
operates a XFI loopback on the XFP or the OTX <Help> This control defines the XFI loop back of the line transceiver |
EKINOPS-MIBEkiStater/w Type Values:
|
.1.3.6.1.4.1.20044.47.6.3.210.1.2 |
.1.3.6.1.4.1.20044.47.6.3.212
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1008mpCtrllineTunableChannelTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmc1008MP-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmc1008MP-MIB::pmc1008mpCtrllineTunableChannelTable'
List of pmc1008mpCtrllineTunableChannel Article
Row definition for the pmc1008mpCtrllineTunableChannel
table
table
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the pmc1008mpCtrllineTunableChannel
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.47.6.3.212.1.1 |
|
ITU Channel :This OID selects
the ITU channel of the Line OTX TLH Laser <Help> This control defines the ITU channel of the Line OTX TLH Laser |
Pmc1008mpOtxChannelr/w Description: Channel selection on OTX-TLH on client and line ports |
.1.3.6.1.4.1.20044.47.6.3.212.1.2 |
.1.3.6.1.4.1.20044.47.6.3.213
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1008mpCtrllinePhotodiodeModeTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmc1008MP-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmc1008MP-MIB::pmc1008mpCtrllinePhotodiodeModeTable'
List of pmc1008mpCtrllinePhotodiodeMode Article
Row definition for the pmc1008mpCtrllinePhotodiodeMode
table
table
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
Index definition for the pmc1008mpCtrllinePhotodiodeMode
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.47.6.3.213.1.1 |
||||||
|
OTX TLH Rx Sens. Mode :This OID
defines the Rx sensiblity mode of the Line OTX TLH <Help> This control defines the receiver sensibility mode of the Line OTX TLH Laser (OTX60, OTX80 or Custom) |
Pmc1008mpOtxModer/w Type Values:
Description: Different modes on OTX-TLH on client and line ports |
.1.3.6.1.4.1.20044.47.6.3.213.1.2 |
.1.3.6.1.4.1.20044.47.6.3.214
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1008mpCtrllinePhotodiodeValueTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmc1008MP-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmc1008MP-MIB::pmc1008mpCtrllinePhotodiodeValueTable'
List of pmc1008mpCtrllinePhotodiodeValue Article
Row definition for the pmc1008mpCtrllinePhotodiodeValue
table
table
| Column | Syntax | OID | ||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Index definition for the pmc1008mpCtrllinePhotodiodeValue
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.47.6.3.214.1.1 |
||||||||||||||||||||||
|
OTX TLH Rx Sensibility :This OID
sets the Rx sensibility of the Line OTX TLH (custom mode only) <Help> This control defines the receiver sensibility value (only in Custom mode) of the Line OTX TLH Laser |
Pmc1008mpAdjustValuer/w Type Values:
Description: Different values in Adjust mode on OTX-TLH on client and line ports |
.1.3.6.1.4.1.20044.47.6.3.214.1.2 |
.1.3.6.1.4.1.20044.47.6.3.215
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1008mpCtrllinePowerLaserTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmc1008MP-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmc1008MP-MIB::pmc1008mpCtrllinePowerLaserTable'
List of pmc1008mpCtrllinePowerLaser Article
Row definition for the pmc1008mpCtrllinePowerLaser
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the pmc1008mpCtrllinePowerLaser
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.47.6.3.215.1.1 |
|
Laser Output Power [3-5] :This
OID sets the output power value on the laser of the Line OTX TLH (Unit = dBm) <Help> This control defines the start-up output power of the Line OTX TLH |
Integer32r/w Constraints: range: 0-255 |
.1.3.6.1.4.1.20044.47.6.3.215.1.2 |
.1.3.6.1.4.1.20044.47.6.3.216
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1008mpCtrlotxVlhResetTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmc1008MP-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmc1008MP-MIB::pmc1008mpCtrlotxVlhResetTable'
List of pmc1008mpCtrlotxVlhReset Article
Row definition for the pmc1008mpCtrlotxVlhReset
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmc1008mpCtrlotxVlhReset
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.47.6.3.216.1.1 |
||||
|
OTX-VLH Reset :This OID resets
the OTX-VLH module <Help> This control resets the OTX-VLH and its parameters |
EKINOPS-MIBEkiOnOffr/w Type Values:
|
.1.3.6.1.4.1.20044.47.6.3.216.1.2 |
.1.3.6.1.4.1.20044.47.6.3.217
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1008mpCtrllineAccessLoopTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmc1008MP-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmc1008MP-MIB::pmc1008mpCtrllineAccessLoopTable'
List of pmc1008mpCtrllineAccessLoop Article
Row definition for the pmc1008mpCtrllineAccessLoop
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmc1008mpCtrllineAccessLoop
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.47.6.3.217.1.1 |
||||
|
Line Facility Loopback :This OID
operates a Line Facility Loopback, looping line input signal on the line output port. The loop is located on the line transceiver. If the Line signal carries DCC, the management ne… |
EKINOPS-MIBEkiStater/w Type Values:
|
.1.3.6.1.4.1.20044.47.6.3.217.1.2 |
.1.3.6.1.4.1.20044.47.6.3.218
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1008mpCtrllineLoopTransceiverTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmc1008MP-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmc1008MP-MIB::pmc1008mpCtrllineLoopTransceiverTable'
List of pmc1008mpCtrllineLoopTransceiver Article
Row definition for the pmc1008mpCtrllineLoopTransceiver
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmc1008mpCtrllineLoopTransceiver
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.47.6.3.218.1.1 |
||||
|
Line Terminal Loopback :This OID
operates a Line Terminal Loopback, looping line input signal on the line output port. The loop is located on all client transceivers <Help> This maintenance parameter operates a L… |
EKINOPS-MIBEkiStater/w Type Values:
|
.1.3.6.1.4.1.20044.47.6.3.218.1.2 |
.1.3.6.1.4.1.20044.47.6.3.335
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1008mpCtrllineResetAllCountTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmc1008MP-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmc1008MP-MIB::pmc1008mpCtrllineResetAllCountTable'
List of pmc1008mpCtrllineResetAllCount Article
Row definition for the pmc1008mpCtrllineResetAllCount
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmc1008mpCtrllineResetAllCount
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.47.6.3.335.1.1 |
||||
|
Line Counters Reset :This OID
resets every counter on the line port <Help> This control operates a reset on the statistics current ,previous and history line port counters |
EKINOPS-MIBEkiStater/w Type Values:
|
.1.3.6.1.4.1.20044.47.6.3.335.1.2 |
pmc1008mpRinvSfpTable
table.1.3.6.1.4.1.20044.47.7.1.1
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1008mpRinvSfpTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmc1008MP-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmc1008MP-MIB::pmc1008mpRinvSfpTable'
List of the SFPs on the selected module
Row definition for the SFP table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index for SFP table
|
Integer32 Constraints: range: 1-16 |
.1.3.6.1.4.1.20044.47.7.1.1.1.1 |
|
Inventory for the SFP: This OID contains the inventory for the SFP
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.20044.47.7.1.1.1.2 |
pmc1008mpRinvLineTable
table.1.3.6.1.4.1.20044.47.7.1.2
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1008mpRinvLineTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmc1008MP-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmc1008MP-MIB::pmc1008mpRinvLineTable'
List of the XFPs on the selected module
Row definition for the XFP table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index for XFP table
|
Integer32 Constraints: range: 1-16 |
.1.3.6.1.4.1.20044.47.7.1.2.1.1 |
|
Inventory for the XFP: This OID contains the inventory for the XFP
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.20044.47.7.1.2.1.2 |
.1.3.6.1.4.1.20044.47.9.1.1
·
1 row entry
·
8 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1008mpCfgClientcaiscsfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmc1008MP-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmc1008MP-MIB::pmc1008mpCfgClientcaiscsfTable'
List of Article
Row definition for the accessCAisCsf
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the clientcaiscsf
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.47.9.1.1.1.1 |
|
CAIS mode on Client Port :This
register enables/disables port laser shutdown on CAIS insertion condition |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.47.9.1.1.1.3 |
|
CSF contributors on Client Port
:This register configures the contributors to upstream CSF insertion on the port. |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.47.9.1.1.1.9 |
|
CSF contributors on Client Port
:This register configures the contributors to upstream CSF insertion on the port. |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.47.9.1.1.1.10 |
|
CAIS contributors on Client Port
:This register configures the contributors to downstream CAIS insertion on port. |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.47.9.1.1.1.17 |
|
CAIS contributors on Client Port
:This register configures the contributors to downstream CAIS insertion on port. |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.47.9.1.1.1.18 |
|
CAIS contributors on Client Port
:This register configures the contributors to downstream CAIS insertion on port. |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.47.9.1.1.1.19 |
|
pmc1008mpCfgDownLineSyncAlarmsPortndeprecated
CAIS contributors on Client Port
:This register configures the contributors to downstream CAIS insertion on port. |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.47.9.1.1.1.20 |
.1.3.6.1.4.1.20044.47.9.2.1
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1008mpCfgClientStartupTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmc1008MP-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmc1008MP-MIB::pmc1008mpCfgClientStartupTable'
List of Article
Row definition for the startup
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the clientStartup
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.47.9.2.1.1.1 |
|
Default Settings on Client Port
:This register configures the default initialisation settings on the port. |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.47.9.2.1.1.3 |
|
Default Protocol on Client Port
:This register configures the default initialisation protocol on the port. |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.47.9.2.1.1.4 |
|
pmc1008mpCfgAdddropConfPortPortndeprecated
Default Add&Drop mode on Client
Port :This register configures the default Add&Drop mode on the port. |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.47.9.2.1.1.5 |
pmc1008mpCfgXfpTable
table.1.3.6.1.4.1.20044.47.9.2.3
·
1 row entry
·
3 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1008mpCfgXfpTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmc1008MP-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmc1008MP-MIB::pmc1008mpCfgXfpTable'
List of Article
Row definition for the startup
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the xfp table
|
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.47.9.2.3.1.1 |
|
Default settings on XFP Port :This
register configures the default initialisation settings on XFP port. |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.47.9.2.3.1.3 |
|
pmc1008mpCfgDataRateConfXfpPortndeprecated
:
|
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.47.9.2.3.1.4 |
pmc1008mpCfgOtxtlhTable
table.1.3.6.1.4.1.20044.47.9.2.4
·
1 row entry
·
11 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1008mpCfgOtxtlhTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmc1008MP-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmc1008MP-MIB::pmc1008mpCfgOtxtlhTable'
List of Article
Row definition for the startup
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the otxtlh
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.47.9.2.4.1.1 |
|
Default Line OTX TLH miscellaneous
:This register configures the start-up miscellaneous mode of the Line OTX TLH |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.47.9.2.4.1.3 |
|
Default Line OTX TLH FM amplitude
:This register configures the start-up width of the frequency modulation of the Line OTX TLH |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.47.9.2.4.1.4 |
|
Default Line OTX TLH FM frequency
:This register configures the start-up frequency of the frequency modulation of the Line OTX TLH |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.47.9.2.4.1.5 |
|
Defaut Line OTX TLH output Power
:This register configures the start-up output power of the Line OTX TLH (Unit = dBm) |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.47.9.2.4.1.6 |
|
Default Line OTX TLH Channel :This
register configures the start-up laser channel of the Line OTX TLH |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.47.9.2.4.1.7 |
|
Default Line OTX TLH Grid :This
register configures the start-up laser grid of the Line OTX TLH |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.47.9.2.4.1.8 |
|
Default Line OTX TLH lowest Freq
:This register configures the start-up lowest frequency supported on the Line OTX TLH |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.47.9.2.4.1.9 |
|
pmc1008mpCfgReservedPortndeprecated
:
|
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.47.9.2.4.1.10 |
|
Default Line OTX TLH APD mode
:This register configures the start-up APD mode of the Line OTX TLH |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.47.9.2.4.1.11 |
|
Default Line OTX TLH APD atten.
:This register configures the start-up APD attenuation on the Line OTX TLH |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.47.9.2.4.1.12 |
.1.3.6.1.4.1.20044.47.9.4.1
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1008mpCfgLabelclientTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmc1008MP-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmc1008MP-MIB::pmc1008mpCfgLabelclientTable'
List of Article
Row definition for the labels
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the labelclient
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.47.9.4.1.1.1 |
|
Default settings on the label
of the Ports :These registers configures the default initialisation settings of the labels of the ports. |
SNMPv2-TCDisplayStringr/w Constraints: range: 1-16Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.20044.47.9.4.1.1.3 |
.1.3.6.1.4.1.20044.47.9.4.2
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1008mpCfgLabellineTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmc1008MP-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmc1008MP-MIB::pmc1008mpCfgLabellineTable'
List of Article
Row definition for the labels
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the labelline
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.47.9.4.2.1.1 |
|
Default settings on the label
of the lines :These registers configures the default initialisation settings of the labels of the lines. |
SNMPv2-TCDisplayStringr/w Constraints: range: 1-16Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.20044.47.9.4.2.1.3 |
.1.3.6.1.4.1.20044.47.9.5.1
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1008mpCfgTimeslotsportsline1Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmc1008MP-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmc1008MP-MIB::pmc1008mpCfgTimeslotsportsline1Table'
List of Article
Row definition for the startuptimeslotsline1
table
table
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the timeslotsportsline1
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.47.9.5.1.1.1 |
|
Port Defaut Time Slot allocation
(MSB) on Line1 :This register configures the start-up timeslots allocation on the port (MSB) |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.47.9.5.1.1.3 |
|
Port Defaut Time Slot allocation
(LSB) on Line1 :This register configures the start-up timeslots allocation on the port (LSB) |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.47.9.5.1.1.4 |
|
Port Defaut Protocol on Line1
:This register configures the start-up protocol on the port |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.47.9.5.1.1.5 |
.1.3.6.1.4.1.20044.47.9.6.1
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1008mpCfgTimeslotsportsline2Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmc1008MP-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmc1008MP-MIB::pmc1008mpCfgTimeslotsportsline2Table'
List of Article
Row definition for the startuptimeslotsline2
table
table
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the timeslotsportsline2
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.47.9.6.1.1.1 |
|
Port Defaut Time Slot allocation
(MSB) on Line2 :This register configures the start-up timeslots allocation on the port (MSB) |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.47.9.6.1.1.3 |
|
Port Defaut Time Slot allocation
(LSB) on Line2 :This register configures the start-up timeslots allocation on the port (LSB) |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.47.9.6.1.1.4 |
|
Port Defaut Protocol on Line2
:This register configures the start-up protocol on the port |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.47.9.6.1.1.5 |
.1.3.6.1.4.1.20044.47.9.7.1
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1008mpCfgTimeslotspassthroughline1Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmc1008MP-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmc1008MP-MIB::pmc1008mpCfgTimeslotspassthroughline1Table'
List of Article
Row definition for the startuptimeslotspassthroughline1
table
table
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the timeslotspassthroughline1
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.47.9.7.1.1.1 |
|
Port Defaut PassThrough Time Slot
allocation (MSB) on Line1 :This register configures the start-up timeslots allocation on the port (MSB) |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.47.9.7.1.1.3 |
|
Port Defaut PassThroughTime Slot
allocation (LSB) on Line1 :This register configures the start-up timeslots allocation on the port (LSB) |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.47.9.7.1.1.4 |
|
Port Defaut PassThrough Protocol
on Line1 :This register configures the start-up protocol on the port |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.47.9.7.1.1.5 |
.1.3.6.1.4.1.20044.47.9.8.1
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1008mpCfgTimeslotspassthroughline2Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmc1008MP-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmc1008MP-MIB::pmc1008mpCfgTimeslotspassthroughline2Table'
List of Article
Row definition for the startuptimeslotspassthroughline2
table
table
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the timeslotspassthroughline2
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.47.9.8.1.1.1 |
|
Port Defaut PassThrough Time Slot
allocation (MSB) on Line2 :This register configures the start-up timeslots allocation on the port (MSB) |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.47.9.8.1.1.3 |
|
Port Defaut PassThroughTime Slot
allocation (LSB) on Line2 :This register configures the start-up timeslots allocation on the port (LSB) |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.47.9.8.1.1.4 |
|
Port Defaut PassThrough Protocol
on Line2 :This register configures the start-up protocol on the port |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.47.9.8.1.1.5 |
.1.3.6.1.4.1.20044.47.9.9.1
·
1 row entry
·
6 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1008mpCfgOtxtlhcapabilitiesTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmc1008MP-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmc1008MP-MIB::pmc1008mpCfgOtxtlhcapabilitiesTable'
List of Article
Row definition for the startuptablefive
table
table
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the otxtlhcapabilities
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.47.9.9.1.1.1 |
|
Component parameters :This OID
defines the component parameters |
Unsigned32 Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.47.9.9.1.1.3 |
|
Miscellaneous default settings
:This OID defines the miscellaneous parameters |
Unsigned32 Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.47.9.9.1.1.4 |
|
Number of the first channel of
the component :This OID defines the first channel number of the PM |
Unsigned32 Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.47.9.9.1.1.5 |
|
Number of the last channel of
the component :This OID defines the last channel number of the PM |
Unsigned32 Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.47.9.9.1.1.6 |
|
Grid value of the component :This
OID defines the grid of the PM |
Unsigned32 Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.47.9.9.1.1.7 |
.1.3.6.1.4.1.20044.47.11.2.4.16
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1008mpMonupRmonByteCntTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmc1008MP-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmc1008MP-MIB::pmc1008mpMonupRmonByteCntTable'
List of pmc1008mpMonupRmonByteCnt Article
Row definition for the pmc1008mpMonupRmonByteCnt
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmc1008mpMonupRmonByteCnt
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.47.11.2.4.16.1.1 |
||||
|
Bytes Counter On Client Input
:This counter is increased each time a data byte is received on the client port <Help> This counter gives the number of bytes received on the client port |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.47.11.2.4.16.1.2 |
||||
|
Bytes Counter Error :This OID
when set indicates the Bytes counter value is invalid on clinet port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.11.2.4.16.1.3 |
||||
|
Bytes Counter Overload :This OID
when set indicates a Bytes counter overload on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.11.2.4.16.1.4 |
.1.3.6.1.4.1.20044.47.11.2.4.24
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1008mpMonupRmonCrcErrorCntTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmc1008MP-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmc1008MP-MIB::pmc1008mpMonupRmonCrcErrorCntTable'
List of pmc1008mpMonupRmonCrcErrorCnt Article
Row definition for the pmc1008mpMonupRmonCrcErrorCnt
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmc1008mpMonupRmonCrcErrorCnt
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.47.11.2.4.24.1.1 |
||||
|
CRC Errors Counter On Client Input
:This counter is increased each time a CRC error is detected on the client port <Help> This counter gives the number of CRC Errors received on the client port |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.47.11.2.4.24.1.2 |
||||
|
CRC Errors Counter Error :This
OID when set indicates the CRC Errors counter value is invalid on clinet port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.11.2.4.24.1.3 |
||||
|
CRC Errors Counter Overload :This
OID when set indicates a CRC Errors counter overload on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.11.2.4.24.1.4 |
.1.3.6.1.4.1.20044.47.11.2.4.32
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1008mpMonupRmonPacketsCntTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmc1008MP-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmc1008MP-MIB::pmc1008mpMonupRmonPacketsCntTable'
List of pmc1008mpMonupRmonPacketsCnt Article
Row definition for the pmc1008mpMonupRmonPacketsCnt
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmc1008mpMonupRmonPacketsCnt
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.47.11.2.4.32.1.1 |
||||
|
Packets Counter On Client Input
:This counter is increased each time a packet is received on the client port <Help> This counter gives the number of packets received on the client port |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.47.11.2.4.32.1.2 |
||||
|
Packets Counter Error :This OID
when set indicates the Packets counter value is invalid on clinet port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.11.2.4.32.1.3 |
||||
|
Packets Counter Overload :This
OID when set indicates a Packets counter overload on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.11.2.4.32.1.4 |
.1.3.6.1.4.1.20044.47.11.2.4.40
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1008mpMonupRmonBroadcastCntTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmc1008MP-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmc1008MP-MIB::pmc1008mpMonupRmonBroadcastCntTable'
List of pmc1008mpMonupRmonBroadcastCnt Article
Row definition for the pmc1008mpMonupRmonBroadcastCnt
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmc1008mpMonupRmonBroadcastCnt
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.47.11.2.4.40.1.1 |
||||
|
Broadcast Counter On Client Input
:This counter is increased each time a broadcast packet is received on the client port <Help> This counter gives the number of Broadcast packets received on the client port |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.47.11.2.4.40.1.2 |
||||
|
Broadcast Counter Error :This
OID when set indicates the Broadcast counter value is invalid on clinet port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.11.2.4.40.1.3 |
||||
|
Broadcast Counter Overload :This
OID when set indicates a Broadcast counter overload on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.11.2.4.40.1.4 |
.1.3.6.1.4.1.20044.47.11.2.4.48
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1008mpMonupRmonMulticastCntTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmc1008MP-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmc1008MP-MIB::pmc1008mpMonupRmonMulticastCntTable'
List of pmc1008mpMonupRmonMulticastCnt Article
Row definition for the pmc1008mpMonupRmonMulticastCnt
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmc1008mpMonupRmonMulticastCnt
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.47.11.2.4.48.1.1 |
||||
|
Multicast Counter On Client Input
:This counter is increased each time a Multicast packet is received on the client port <Help> This counter gives the number of Multicast packets received on the client port |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.47.11.2.4.48.1.2 |
||||
|
Multicast Counter Error :This
OID when set indicates the Multicast counter value is invalid on clinet port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.11.2.4.48.1.3 |
||||
|
Multicast Counter Overload :This
OID when set indicates a Multicast counter overload on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.11.2.4.48.1.4 |
.1.3.6.1.4.1.20044.47.11.2.16
·
1 row entry
·
11 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1008mpPerfTelecomClientCurrent15StatTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmc1008MP-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmc1008MP-MIB::pmc1008mpPerfTelecomClientCurrent15StatTable'
List of pmc1008mpPerfTelecomClientCurrent15Stat Article
Row definition for the pmc1008mpPerfTelecomClientCurrent15Stat
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmc1008mpPerfTelecomClientCurrent15Stat
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.47.11.2.16.1.1 |
||||
|
Current 15-min CV counter inv.
:This OID indicates that the current 15-min Coding Violation counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.11.2.16.1.2 |
||||
|
Current 15-min CV counter :This
OID gives the current 15-min Coding Violation counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.47.11.2.16.1.3 |
||||
|
Current 15-min ES counter inv.
:This OID indicates that the current 15-min Errored Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.11.2.16.1.4 |
||||
|
Current 15-min ES counter :This
OID gives the current 15-min Errored Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.47.11.2.16.1.5 |
||||
|
Current 15-min SES counter inv.
:This OID indicates that the current 15-min severely Errored Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.11.2.16.1.6 |
||||
|
Current 15-min SES counter :This
OID gives the current 15-min severely Errored Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.47.11.2.16.1.7 |
||||
|
Current 15-min SEFS counter inv.
:This OID indicates that the current 15-min severely Errored Framing Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.11.2.16.1.8 |
||||
|
Current 15-min SEFS counter :This
OID gives the current 15-min severely Errored Framing Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.47.11.2.16.1.9 |
||||
|
Current 15-min UAS counter inv.
:This OID indicates that the current 15-min UnAvailable Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.11.2.16.1.10 |
||||
|
Current 15-min UAS counter :This
OID gives the current 15-min UnAvailable Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.47.11.2.16.1.11 |
.1.3.6.1.4.1.20044.47.11.2.24
·
1 row entry
·
11 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1008mpPerfTelecomClientPast15StatHistoryPort1Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmc1008MP-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmc1008MP-MIB::pmc1008mpPerfTelecomClientPast15StatHistoryPort1Table'
List of pmc1008mpPerfTelecomClientPast15StatHistory Article
Row definition for the pmc1008mpPerfTelecomClientPast15StatHistory
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmc1008mpPerfTelecomClientPast15StatHistory
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.47.11.2.24.1.1 |
||||
|
Previous 15-min CV counter inv.
:This OID indicates that the previous 15-min Coding Violation counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.11.2.24.1.2 |
||||
|
Previous 15-min CV counter :This
OID gives the previous 15-min Coding Violation counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.47.11.2.24.1.3 |
||||
|
Previous 15-min ES counter inv.
:This OID indicates that the previous 15-min Errored Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.11.2.24.1.4 |
||||
|
Previous 15-min ES counter :This
OID gives the previous 15-min Errored Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.47.11.2.24.1.5 |
||||
|
Previous 15-min SES counter inv.
:This OID indicates that the previous 15-min severely Errored Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.11.2.24.1.6 |
||||
|
Previous 15-min SES counter :This
OID gives the previous 15-min severely Errored Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.47.11.2.24.1.7 |
||||
|
Previous 15-min SEFS counter inv.
:This OID indicates that the previous 15-min severely Errored Framing Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.11.2.24.1.8 |
||||
|
Previous 15-min SEFS counter :This
OID gives the previous 15-min severely Errored Framing Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.47.11.2.24.1.9 |
||||
|
Previous 15-min UAS counter inv.
:This OID indicates that the previous 15-min UnAvailable Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.11.2.24.1.10 |
||||
|
Previous 15-min UAS counter :This
OID gives the previous 15-min UnAvailable Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.47.11.2.24.1.11 |
.1.3.6.1.4.1.20044.47.11.2.32
·
1 row entry
·
11 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1008mpPerfTelecomClientCurrent24StatTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmc1008MP-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmc1008MP-MIB::pmc1008mpPerfTelecomClientCurrent24StatTable'
List of pmc1008mpPerfTelecomClientCurrent24Stat Article
Row definition for the pmc1008mpPerfTelecomClientCurrent24Stat
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmc1008mpPerfTelecomClientCurrent24Stat
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.47.11.2.32.1.1 |
||||
|
Current 24-hours CV counter inv.
:This OID indicates that the current 24-hours Coding Violation counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.11.2.32.1.2 |
||||
|
Current 24-hours CV counter :This
OID gives the current 24-hours Coding Violation counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.47.11.2.32.1.3 |
||||
|
Current 24-hours ES counter inv.
:This OID indicates that the current 24-hours Errored Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.11.2.32.1.4 |
||||
|
Current 24-hours ES counter :This
OID gives the current 24-hours Errored Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.47.11.2.32.1.5 |
||||
|
Current 24-hours SES counter inv.
:This OID indicates that the current 24-hours severely Errored Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.11.2.32.1.6 |
||||
|
Current 24-hours SES counter :This
OID gives the current 24-hours severely Errored Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.47.11.2.32.1.7 |
||||
|
Current 24-hours SEFS counter
inv. :This OID indicates that the current 24-hours severely Errored Framing Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.11.2.32.1.8 |
||||
|
Current 24-hours SEFS counter
:This OID gives the current 24-hours severely Errored Framing Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.47.11.2.32.1.9 |
||||
|
Current 24-hours UAS counter inv.
:This OID indicates that the current 24-hours UnAvailable Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.11.2.32.1.10 |
||||
|
Current 24-hours UAS counter :This
OID gives the current 24-hours UnAvailable Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.47.11.2.32.1.11 |
.1.3.6.1.4.1.20044.47.11.2.40
·
1 row entry
·
11 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1008mpPerfTelecomClientPast24StatHistoryPort1Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmc1008MP-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmc1008MP-MIB::pmc1008mpPerfTelecomClientPast24StatHistoryPort1Table'
List of pmc1008mpPerfTelecomClientPast24StatHistory Article
Row definition for the pmc1008mpPerfTelecomClientPast24StatHistory
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmc1008mpPerfTelecomClientPast24StatHistory
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.47.11.2.40.1.1 |
||||
|
Previous 24-hours CV counter inv.
:This OID indicates that the previous 24-hours Coding Violation counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.11.2.40.1.2 |
||||
|
Previous 24-hours CV counter :This
OID gives the previous 24-hours Coding Violation counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.47.11.2.40.1.3 |
||||
|
Previous 24-hours ES counter inv.
:This OID indicates that the previous 24-hours Errored Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.11.2.40.1.4 |
||||
|
Previous 24-hours ES counter :This
OID gives the previous 24-hours Errored Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.47.11.2.40.1.5 |
||||
|
Previous 24-hours SES counter
inv. :This OID indicates that the previous 24-hours severely Errored Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.11.2.40.1.6 |
||||
|
Previous 24-hours SES counter
:This OID gives the previous 24-hours severely Errored Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.47.11.2.40.1.7 |
||||
|
Previous 24-hours SEFS counter
inv. :This OID indicates that the previous 24-hours severely Errored Framing Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.11.2.40.1.8 |
||||
|
Previous 24-hours SEFS counter
:This OID gives the previous 24-hours severely Errored Framing Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.47.11.2.40.1.9 |
||||
|
Previous 24-hours UAS counter
inv. :This OID indicates that the previous 24-hours UnAvailable Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.11.2.40.1.10 |
||||
|
Previous 24-hours UAS counter
:This OID gives the previous 24-hours UnAvailable Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.47.11.2.40.1.11 |
.1.3.6.1.4.1.20044.47.11.2.256
·
1 row entry
·
23 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1008mpPerfDatacomClientCurrent15StatTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmc1008MP-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmc1008MP-MIB::pmc1008mpPerfDatacomClientCurrent15StatTable'
List of pmc1008mpPerfDatacomClientCurrent15Stat Article
Row definition for the pmc1008mpPerfDatacomClientCurrent15Stat
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmc1008mpPerfDatacomClientCurrent15Stat
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.47.11.2.256.1.1 |
||||
|
Client Current 15-min Input Bytes
counter inv. :This OID indicates that the current 15-min Bytes counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.11.2.256.1.2 |
||||
|
Client Current 15-min Input Bytes
counter :This OID gives the current 15-min Bytes counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.47.11.2.256.1.3 |
||||
|
Client Current 15-min Input CRC
counter inv. :This OID indicates that the current 15-min CRC counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.11.2.256.1.4 |
||||
|
Client Current 15-min Input CRC
counter :This OID gives the current 15-min CRC counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.47.11.2.256.1.5 |
||||
|
Client Current 15-min Input Broadcast
counter inv. :This OID indicates that the current 15-min Broadcast counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.11.2.256.1.8 |
||||
|
Client Current 15-min Input Broadcast
counter :This OID gives the current 15-min Broadcast counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.47.11.2.256.1.9 |
||||
|
Client Current 15-min Input Multicast
counter inv. :This OID indicates that the current 15-min Multicast counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.11.2.256.1.10 |
||||
|
Client Current 15-min Input Multicast
counter :This OID gives the current 15-min Multicast counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.47.11.2.256.1.11 |
||||
|
Client Current 15-min Input Unicast
counter inv. :This OID indicates that the current 15-min Unicast counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.11.2.256.1.20 |
||||
|
Client Current 15-min Input Unicast
counter :This OID gives the current 15-min Unicast counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.47.11.2.256.1.21 |
||||
|
Client Current 15-min Input Non
Unicast counter inv. :This OID indicates that the current 15-min Non unicast counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.11.2.256.1.22 |
||||
|
Client Current 15-min Input Non
Unicast counter :This OID gives the current 15-min Non Unicast counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.47.11.2.256.1.23 |
||||
|
Client Current 15-min Output Bytes
counter inv. :This OID indicates that the current 15-min Bytes counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.11.2.256.1.26 |
||||
|
Client Current 15-min Output Bytes
counter :This OID gives the current 15-min Bytes counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.47.11.2.256.1.27 |
||||
|
Client Current 15-min Output Broadcast
counter inv. :This OID indicates that the current 15-min Broadcast counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.11.2.256.1.32 |
||||
|
Client Current 15-min Output Broadcast
counter :This OID gives the current 15-min Broadcast counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.47.11.2.256.1.33 |
||||
|
Client Current 15-min Output Multicast
counter inv. :This OID indicates that the current 15-min Multicast counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.11.2.256.1.34 |
||||
|
Client Current 15-min Output Multicast
counter :This OID gives the current 15-min Multicast counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.47.11.2.256.1.35 |
||||
|
Client Current 15-min Output Unicast
counter inv. :This OID indicates that the current 15-min Unicast counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.11.2.256.1.42 |
||||
|
Client Current 15-min Output Unicast
counter :This OID gives the current 15-min Unicast counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.47.11.2.256.1.43 |
||||
|
Client Current 15-min Output Non
Unicast counter inv. :This OID indicates that the current 15-min Non Unicast counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.11.2.256.1.44 |
||||
|
Client Current 15-min Output Non
Unicast counter :This OID gives the current 15-min Non Unicast counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.47.11.2.256.1.45 |
.1.3.6.1.4.1.20044.47.11.2.264
·
1 row entry
·
23 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1008mpPerfDatacomClientPast15StatHistoryPort1Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmc1008MP-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmc1008MP-MIB::pmc1008mpPerfDatacomClientPast15StatHistoryPort1Table'
List of pmc1008mpPerfDatacomClientPast15StatHistory Article
Row definition for the pmc1008mpPerfDatacomClientPast15StatHistory
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmc1008mpPerfDatacomClientPast15StatHistory
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.47.11.2.264.1.1 |
||||
|
Client Past 15-min Input Bytes
counter inv. :This OID indicates that the past 15-min Bytes counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.11.2.264.1.2 |
||||
|
Client Past 15-min Input Bytes
counter :This OID gives the past 15-min Bytes counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.47.11.2.264.1.3 |
||||
|
Client Past 15-min Input CRC counter
inv. :This OID indicates that the past 15-min CRC counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.11.2.264.1.4 |
||||
|
Client Past 15-min Input CRC counter
:This OID gives the past 15-min CRC counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.47.11.2.264.1.5 |
||||
|
Client Past 15-min Input Broadcast
counter inv. :This OID indicates that the past 15-min Broadcast counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.11.2.264.1.8 |
||||
|
Client Past 15-min Input Broadcast
counter :This OID gives the past 15-min Broadcast counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.47.11.2.264.1.9 |
||||
|
Client Past 15-min Input Multicast
counter inv. :This OID indicates that the past 15-min Multicast counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.11.2.264.1.10 |
||||
|
Client Past 15-min Input Multicast
counter :This OID gives the past 15-min Multicast counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.47.11.2.264.1.11 |
||||
|
Client Past 15-min Input Unicast
counter inv. :This OID indicates that the past 15-min Unicast counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.11.2.264.1.20 |
||||
|
Client Past 15-min Input Unicast
counter :This OID gives the past 15-min Unicast counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.47.11.2.264.1.21 |
||||
|
Client Past 15-min Input Non Unicast
counter inv. :This OID indicates that the past 15-min Non unicast counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.11.2.264.1.22 |
||||
|
Client Past 15-min Input Non Unicast
counter :This OID gives the past 15-min Non Unicast counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.47.11.2.264.1.23 |
||||
|
Client Past 15-min Output Bytes
counter inv. :This OID indicates that the past 15-min Bytes counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.11.2.264.1.26 |
||||
|
Client Past 15-min Output Bytes
counter :This OID gives the past 15-min Bytes counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.47.11.2.264.1.27 |
||||
|
Client Past 15-min Output Broadcast
counter inv. :This OID indicates that the past 15-min Broadcast counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.11.2.264.1.32 |
||||
|
Client Past 15-min Output Broadcast
counter :This OID gives the past 15-min Broadcast counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.47.11.2.264.1.33 |
||||
|
Client Past 15-min Output Multicast
counter inv. :This OID indicates that the past 15-min Multicast counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.11.2.264.1.34 |
||||
|
Client Past 15-min Output Multicast
counter :This OID gives the past 15-min Multicast counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.47.11.2.264.1.35 |
||||
|
Client Past 15-min Output Unicast
counter inv. :This OID indicates that the past 15-min Unicast counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.11.2.264.1.42 |
||||
|
Client Past 15-min Output Unicast
counter :This OID gives the past 15-min Unicast counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.47.11.2.264.1.43 |
||||
|
Client Past 15-min Output Non
Unicast counter inv. :This OID indicates that the past 15-min Non Unicast counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.11.2.264.1.44 |
||||
|
Client Past 15-min Output Non
Unicast counter :This OID gives the past 15-min Non Unicast counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.47.11.2.264.1.45 |
.1.3.6.1.4.1.20044.47.11.2.272
·
1 row entry
·
23 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1008mpPerfDatacomClientCurrent24StatTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmc1008MP-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmc1008MP-MIB::pmc1008mpPerfDatacomClientCurrent24StatTable'
List of pmc1008mpPerfDatacomClientCurrent24Stat Article
Row definition for the pmc1008mpPerfDatacomClientCurrent24Stat
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmc1008mpPerfDatacomClientCurrent24Stat
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.47.11.2.272.1.1 |
||||
|
Client Current 24-hours Input
Bytes counter inv. :This OID indicates that the current 24-hours Bytes counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.11.2.272.1.2 |
||||
|
Client Current 24-hours Input
Bytes counter :This OID gives the current 24-hours Bytes counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.47.11.2.272.1.3 |
||||
|
Client Current 24-hours Input
CRC counter inv. :This OID indicates that the current 24-hours CRC counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.11.2.272.1.4 |
||||
|
Client Current 24-hours Input
CRC counter :This OID gives the current 24-hours CRC counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.47.11.2.272.1.5 |
||||
|
Client Current 24-hours Input
Broadcast counter inv. :This OID indicates that the current 24-hours Broadcast counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.11.2.272.1.8 |
||||
|
Client Current 24-hours Input
Broadcast counter :This OID gives the current 24-hours Broadcast counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.47.11.2.272.1.9 |
||||
|
Client Current 24-hours Input
Multicast counter inv. :This OID indicates that the current 24-hours Multicast counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.11.2.272.1.10 |
||||
|
Client Current 24-hours Input
Multicast counter :This OID gives the current 24-hours Multicast counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.47.11.2.272.1.11 |
||||
|
Client Current 24-hours Input
Unicast counter inv. :This OID indicates that the current 24-hours Unicast counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.11.2.272.1.20 |
||||
|
Client Current 24-hours Input
Unicast counter :This OID gives the current 24-hours Unicast counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.47.11.2.272.1.21 |
||||
|
Client Current 24-hours Input
Non Unicast counter inv. :This OID indicates that the current 24-hours Non unicast counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.11.2.272.1.22 |
||||
|
Client Current 24-hours Input
Non Unicast counter :This OID gives the current 24-hours Non Unicast counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.47.11.2.272.1.23 |
||||
|
Client Current 24-hours Output
Bytes counter inv. :This OID indicates that the current 24-hours Bytes counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.11.2.272.1.26 |
||||
|
Client Current 24-hours Output
Bytes counter :This OID gives the current 24-hours Bytes counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.47.11.2.272.1.27 |
||||
|
Client Current 24-hours Output
Broadcast counter inv. :This OID indicates that the current 24-hours Broadcast counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.11.2.272.1.32 |
||||
|
Client Current 24-hours Output
Broadcast counter :This OID gives the current 24-hours Broadcast counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.47.11.2.272.1.33 |
||||
|
Client Current 24-hours Output
Multicast counter inv. :This OID indicates that the current 24-hours Multicast counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.11.2.272.1.34 |
||||
|
Client Current 24-hours Output
Multicast counter :This OID gives the current 24-hours Multicast counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.47.11.2.272.1.35 |
||||
|
Client Current 24-hours Output
Unicast counter inv. :This OID indicates that the current 24-hours Unicast counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.11.2.272.1.42 |
||||
|
Client Current 24-hours Output
Unicast counter :This OID gives the current 24-hours Unicast counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.47.11.2.272.1.43 |
||||
|
Client Current 24-hours Output
Non Unicast counter inv. :This OID indicates that the current 24-hours Non Unicast counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.11.2.272.1.44 |
||||
|
Client Current 24-hours Output
Non Unicast counter :This OID gives the current 24-hours Non Unicast counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.47.11.2.272.1.45 |
.1.3.6.1.4.1.20044.47.11.2.280
·
1 row entry
·
23 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1008mpPerfDatacomClientPast24StatHistoryPort1Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmc1008MP-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmc1008MP-MIB::pmc1008mpPerfDatacomClientPast24StatHistoryPort1Table'
List of pmc1008mpPerfDatacomClientPast24StatHistory Article
Row definition for the pmc1008mpPerfDatacomClientPast24StatHistory
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmc1008mpPerfDatacomClientPast24StatHistory
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.47.11.2.280.1.1 |
||||
|
Client Past 24-hours Input Bytes
counter inv. :This OID indicates that the past 24-hours Bytes counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.11.2.280.1.2 |
||||
|
Client Past 24-hours Input Bytes
counter :This OID gives the past 24-hours Bytes counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.47.11.2.280.1.3 |
||||
|
Client Past 24-hours Input CRC
counter inv. :This OID indicates that the past 24-hours CRC counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.11.2.280.1.4 |
||||
|
Client Past 24-hours Input CRC
counter :This OID gives the past 24-hours CRC counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.47.11.2.280.1.5 |
||||
|
Client Past 24-hours Input Broadcast
counter inv. :This OID indicates that the past 24-hours Broadcast counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.11.2.280.1.8 |
||||
|
Client Past 24-hours Input Broadcast
counter :This OID gives the past 24-hours Broadcast counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.47.11.2.280.1.9 |
||||
|
Client Past 24-hours Input Multicast
counter inv. :This OID indicates that the past 24-hours Multicast counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.11.2.280.1.10 |
||||
|
Client Past 24-hours Input Multicast
counter :This OID gives the past 24-hours Multicast counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.47.11.2.280.1.11 |
||||
|
Client Past 24-hours Input Unicast
counter inv. :This OID indicates that the past 24-hours Unicast counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.11.2.280.1.20 |
||||
|
Client Past 24-hours Input Unicast
counter :This OID gives the past 24-hours Unicast counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.47.11.2.280.1.21 |
||||
|
Client Past 24-hours Input Non
Unicast counter inv. :This OID indicates that the past 24-hours Non unicast counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.11.2.280.1.22 |
||||
|
Client Past 24-hours Input Non
Unicast counter :This OID gives the past 24-hours Non Unicast counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.47.11.2.280.1.23 |
||||
|
Client Past 24-hours Output Bytes
counter inv. :This OID indicates that the past 24-hours Bytes counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.11.2.280.1.26 |
||||
|
Client Past 24-hours Output Bytes
counter :This OID gives the past 24-hours Bytes counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.47.11.2.280.1.27 |
||||
|
Client Past 24-hours Output Broadcast
counter inv. :This OID indicates that the past 24-hours Broadcast counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.11.2.280.1.32 |
||||
|
Client Past 24-hours Output Broadcast
counter :This OID gives the past 24-hours Broadcast counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.47.11.2.280.1.33 |
||||
|
Client Past 24-hours Output Multicast
counter inv. :This OID indicates that the past 24-hours Multicast counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.11.2.280.1.34 |
||||
|
Client Past 24-hours Output Multicast
counter :This OID gives the past 24-hours Multicast counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.47.11.2.280.1.35 |
||||
|
Client Past 24-hours Output Unicast
counter inv. :This OID indicates that the past 24-hours Unicast counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.11.2.280.1.42 |
||||
|
Client Past 24-hours Output Unicast
counter :This OID gives the past 24-hours Unicast counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.47.11.2.280.1.43 |
||||
|
Client Past 24-hours Output Non
Unicast counter inv. :This OID indicates that the past 24-hours Non Unicast counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.11.2.280.1.44 |
||||
|
Client Past 24-hours Output Non
Unicast counter :This OID gives the past 24-hours Non Unicast counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.47.11.2.280.1.45 |
.1.3.6.1.4.1.20044.47.11.3.128
·
1 row entry
·
11 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1008mpPerfTelecomLineCurrent15StatTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmc1008MP-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmc1008MP-MIB::pmc1008mpPerfTelecomLineCurrent15StatTable'
List of pmc1008mpPerfTelecomLineCurrent15Stat Article
Row definition for the pmc1008mpPerfTelecomLineCurrent15Stat
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmc1008mpPerfTelecomLineCurrent15Stat
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.47.11.3.128.1.1 |
||||
|
Current 15-min CV counter inv.
:This OID indicates that the current 15-min Coding Violation counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.11.3.128.1.2 |
||||
|
Current 15-min CV counter :This
OID gives the current 15-min Coding Violation counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.47.11.3.128.1.3 |
||||
|
Current 15-min ES counter inv.
:This OID indicates that the current 15-min Errored Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.11.3.128.1.4 |
||||
|
Current 15-min ES counter :This
OID gives the current 15-min Errored Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.47.11.3.128.1.5 |
||||
|
Current 15-min SES counter inv.
:This OID indicates that the current 15-min severely Errored Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.11.3.128.1.6 |
||||
|
Current 15-min SES counter :This
OID gives the current 15-min severely Errored Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.47.11.3.128.1.7 |
||||
|
Current 15-min SEFS counter inv.
:This OID indicates that the current 15-min severely Errored Framing Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.11.3.128.1.8 |
||||
|
Current 15-min SEFS counter :This
OID gives the current 15-min severely Errored Framing Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.47.11.3.128.1.9 |
||||
|
Current 15-min UAS counter inv.
:This OID indicates that the current 15-min UnAvailable Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.11.3.128.1.10 |
||||
|
Current 15-min UAS counter :This
OID gives the current 15-min UnAvailable Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.47.11.3.128.1.11 |
.1.3.6.1.4.1.20044.47.11.3.129
·
1 row entry
·
11 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1008mpPerfTelecomLinePast15StatHistoryPort1Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmc1008MP-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmc1008MP-MIB::pmc1008mpPerfTelecomLinePast15StatHistoryPort1Table'
List of pmc1008mpPerfTelecomLinePast15StatHistory Article
Row definition for the pmc1008mpPerfTelecomLinePast15StatHistory
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmc1008mpPerfTelecomLinePast15StatHistory
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.47.11.3.129.1.1 |
||||
|
Previous 15-min CV counter inv.
:This OID indicates that the previous 15-min Coding Violation counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.11.3.129.1.2 |
||||
|
Previous 15-min CV counter :This
OID gives the previous 15-min Coding Violation counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.47.11.3.129.1.3 |
||||
|
Previous 15-min ES counter inv.
:This OID indicates that the previous 15-min Errored Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.11.3.129.1.4 |
||||
|
Previous 15-min ES counter :This
OID gives the previous 15-min Errored Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.47.11.3.129.1.5 |
||||
|
Previous 15-min SES counter inv.
:This OID indicates that the previous 15-min severely Errored Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.11.3.129.1.6 |
||||
|
Previous 15-min SES counter :This
OID gives the previous 15-min severely Errored Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.47.11.3.129.1.7 |
||||
|
Previous 15-min SEFS counter inv.
:This OID indicates that the previous 15-min severely Errored Framing Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.11.3.129.1.8 |
||||
|
Previous 15-min SEFS counter :This
OID gives the previous 15-min severely Errored Framing Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.47.11.3.129.1.9 |
||||
|
Previous 15-min UAS counter inv.
:This OID indicates that the previous 15-min UnAvailable Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.11.3.129.1.10 |
||||
|
Previous 15-min UAS counter :This
OID gives the previous 15-min UnAvailable Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.47.11.3.129.1.11 |
.1.3.6.1.4.1.20044.47.11.3.130
·
1 row entry
·
11 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1008mpPerfTelecomLineCurrent24StatTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmc1008MP-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmc1008MP-MIB::pmc1008mpPerfTelecomLineCurrent24StatTable'
List of pmc1008mpPerfTelecomLineCurrent24Stat Article
Row definition for the pmc1008mpPerfTelecomLineCurrent24Stat
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmc1008mpPerfTelecomLineCurrent24Stat
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.47.11.3.130.1.1 |
||||
|
Current 24-hours CV counter inv.
:This OID indicates that the current 24-hours Coding Violation counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.11.3.130.1.2 |
||||
|
Current 24-hours CV counter :This
OID gives the current 24-hours Coding Violation counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.47.11.3.130.1.3 |
||||
|
Current 24-hours ES counter inv.
:This OID indicates that the current 24-hours Errored Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.11.3.130.1.4 |
||||
|
Current 24-hours ES counter :This
OID gives the current 24-hours Errored Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.47.11.3.130.1.5 |
||||
|
Current 24-hours SES counter inv.
:This OID indicates that the current 24-hours severely Errored Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.11.3.130.1.6 |
||||
|
Current 24-hours SES counter :This
OID gives the current 24-hours severely Errored Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.47.11.3.130.1.7 |
||||
|
Current 24-hours SEFS counter
inv. :This OID indicates that the current 24-hours severely Errored Framing Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.11.3.130.1.8 |
||||
|
Current 24-hours SEFS counter
:This OID gives the current 24-hours severely Errored Framing Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.47.11.3.130.1.9 |
||||
|
Current 24-hours UAS counter inv.
:This OID indicates that the current 24-hours UnAvailable Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.11.3.130.1.10 |
||||
|
Current 24-hours UAS counter :This
OID gives the current 24-hours UnAvailable Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.47.11.3.130.1.11 |
.1.3.6.1.4.1.20044.47.11.3.131
·
1 row entry
·
11 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1008mpPerfTelecomLinePast24StatHistoryPort1Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmc1008MP-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmc1008MP-MIB::pmc1008mpPerfTelecomLinePast24StatHistoryPort1Table'
List of pmc1008mpPerfTelecomLinePast24StatHistory Article
Row definition for the pmc1008mpPerfTelecomLinePast24StatHistory
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmc1008mpPerfTelecomLinePast24StatHistory
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.47.11.3.131.1.1 |
||||
|
Previous 24-hours CV counter inv.
:This OID indicates that the previous 24-hours Coding Violation counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.11.3.131.1.2 |
||||
|
Previous 24-hours CV counter :This
OID gives the previous 24-hours Coding Violation counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.47.11.3.131.1.3 |
||||
|
Previous 24-hours ES counter inv.
:This OID indicates that the previous 24-hours Errored Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.11.3.131.1.4 |
||||
|
Previous 24-hours ES counter :This
OID gives the previous 24-hours Errored Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.47.11.3.131.1.5 |
||||
|
Previous 24-hours SES counter
inv. :This OID indicates that the previous 24-hours severely Errored Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.11.3.131.1.6 |
||||
|
Previous 24-hours SES counter
:This OID gives the previous 24-hours severely Errored Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.47.11.3.131.1.7 |
||||
|
Previous 24-hours SEFS counter
inv. :This OID indicates that the previous 24-hours severely Errored Framing Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.11.3.131.1.8 |
||||
|
Previous 24-hours SEFS counter
:This OID gives the previous 24-hours severely Errored Framing Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.47.11.3.131.1.9 |
||||
|
Previous 24-hours UAS counter
inv. :This OID indicates that the previous 24-hours UnAvailable Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.47.11.3.131.1.10 |
||||
|
Previous 24-hours UAS counter
:This OID gives the previous 24-hours UnAvailable Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.47.11.3.131.1.11 |