EKINOPS-Pm404-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
34
Rows
34
Columns
131

pm404Almline1SfpWarnDdmTable

table
.1.3.6.1.4.1.20044.25.2.2.1.32 · 1 row entry · 11 columns
Open in standard view
Uses the ekinops variant from /opt/observium/mibs/ekinops.
Command help
Walk pm404Almline1SfpWarnDdmTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm404-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm404-MIB::pm404Almline1SfpWarnDdmTable' 
List of pm404Almline1SfpWarnDdm 
Article
pm404Almline1SfpWarnDdmEntry row .1.3.6.1.4.1.20044.25.2.2.1.32.1
Row definition for the pm404Almline1SfpWarnDdm
table
Indexes
Column Syntax OID
pm404Almline1SfpWarnDdmIndex
Index definition for the pm404Almline1SfpWarnDdm
table
Integer32
Constraints:
range: 0-128
 .1.3.6.1.4.1.20044.25.2.2.1.32.1.1
pm404AlmLine1TxPwLowWngPortn
Line 1 SFP Tx Power Low Warning
:Warning indicating that the SFP
output power of port is lower than
the threshold value written in
the SFP EEPROM <Condtype> LINE1_TX_PW_LOW_WNG_A
<Probcause> transmitterFailure
(56…
EKINOPS-MIBEkiOnOff
Type Values:
1off
2on
 .1.3.6.1.4.1.20044.25.2.2.1.32.1.2
pm404AlmLine1TxPwrHighWngPortn
Line 1 SFP Tx Power High Warning
:Warning indicating that the SFP
output power of port is higher
than the threshold value written
in the SFP EEPROM <Condtype> LINE1_TX_PWR_HIGH_WNG_A
<Probcause> transmitterFailure
…
EKINOPS-MIBEkiOnOff
Type Values:
1off
2on
 .1.3.6.1.4.1.20044.25.2.2.1.32.1.3
pm404AlmLine1TxBiasLowWngPortn
Line 1 SFP Bias Low Warning :Warning
indicating that the SFP laser bias
current of port is lower than the
threshold value written in the
SFP EEPROM <Condtype> LINE1_TX_BIAS_LOW_WNG_A
<Probcause> transmitterFailure
…
EKINOPS-MIBEkiOnOff
Type Values:
1off
2on
 .1.3.6.1.4.1.20044.25.2.2.1.32.1.4
pm404AlmLine1TxBiasHighWngPortn
Line 1 SFP Bias High Warning :Warning
indicating that the SFP laser bias
current of port is higher than
the threshold value written in
the SFP EEPROM <Condtype> LINE1_TX_BIAS_HIGH_WNG_A
<Probcause> transmitterFailu…
EKINOPS-MIBEkiOnOff
Type Values:
1off
2on
 .1.3.6.1.4.1.20044.25.2.2.1.32.1.5
pm404AlmLine1VccLowWngPortn
Line 1 SFP Power Supply Low Warning
:Warning indicating that the SFP
power supply of port is lower than
the threshold value written in
the SFP EEPROM <Condtype> LINE1_VCC_LOW_WNG_A
<Probcause> powerProblem (36) <A…
EKINOPS-MIBEkiOnOff
Type Values:
1off
2on
 .1.3.6.1.4.1.20044.25.2.2.1.32.1.6
pm404AlmLine1VccHighWngPortn
Line 1 SFP Power Supply High Warning
:Warning indicating that the SFP
power supply of port is higher
than the threshold value written
in the SFP EEPROM <Condtype> LINE1_VCC_HIGH_WNG_A
<Probcause> powerProblem (36)…
EKINOPS-MIBEkiOnOff
Type Values:
1off
2on
 .1.3.6.1.4.1.20044.25.2.2.1.32.1.7
pm404AlmLine1TempLowWngPortn
Line 1 SFP Temp Low Warning :Warning
indicating that the SFP temperature
of port is lower than the threshold
value written in the SFP EEPROM
<Condtype> LINE1_TEMP_LOW_WNG_A
<Probcause> temperatureUnacceptable
(51)…
EKINOPS-MIBEkiOnOff
Type Values:
1off
2on
 .1.3.6.1.4.1.20044.25.2.2.1.32.1.8
pm404AlmLine1TempHighWngPortn
Line 1 SFP Temp High Warning :Warning
indicating that the SFP temperature
of port is higher than the threshold
value written in the SFP EEPROM
<Condtype> LINE1_TEMP_HIGH_WNG_A
<Probcause> temperatureUnacceptable
(…
EKINOPS-MIBEkiOnOff
Type Values:
1off
2on
 .1.3.6.1.4.1.20044.25.2.2.1.32.1.9
pm404AlmLine1RxPwrLowWngPortn
Line 1 SFP Rx Power Low Warning
:Warning indicating that the SFP
input power of port is lower than
the threshold value written in
the SFP EEPROM <Condtype> LINE1_RX_PWR_LOW_WNG_A
<Probcause> receiveFailure (41)
<A…
EKINOPS-MIBEkiOnOff
Type Values:
1off
2on
 .1.3.6.1.4.1.20044.25.2.2.1.32.1.16
pm404AlmLine1RxPwrHighWngPortn
Line 1 SFP Rx Power High Warning
:Warning indicating that the SFP
input power of port is higher than
the threshold value written in
the SFP EEPROM <Condtype> LINE1_RX_PWR_HIGH_WNG_A
<Probcause> receiveFailure (41) …
EKINOPS-MIBEkiOnOff
Type Values:
1off
2on
 .1.3.6.1.4.1.20044.25.2.2.1.32.1.17

pm404Almline1SfpAlmDdmTable

table
.1.3.6.1.4.1.20044.25.2.2.2.24 · 1 row entry · 11 columns
Open in standard view
Uses the ekinops variant from /opt/observium/mibs/ekinops.
Command help
Walk pm404Almline1SfpAlmDdmTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm404-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm404-MIB::pm404Almline1SfpAlmDdmTable' 
List of pm404Almline1SfpAlmDdm 
Article
pm404Almline1SfpAlmDdmEntry row .1.3.6.1.4.1.20044.25.2.2.2.24.1
Row definition for the pm404Almline1SfpAlmDdm
table
Indexes
Column Syntax OID
pm404Almline1SfpAlmDdmIndex
Index definition for the pm404Almline1SfpAlmDdm
table
Integer32
Constraints:
range: 0-128
 .1.3.6.1.4.1.20044.25.2.2.2.24.1.1
pm404AlmLine1TxPwrLowAlaPortn
Line 1 SFP Tx Power Low :Alarm
indicating that the SFP output
power of port is lower than the
threshold value written in the
SFP EEPROM <Condtype> LINE1_TX_PWR_LOW_ALA_A
<Probcause> transmitterFailure
(56) <Alarmt…
EKINOPS-MIBEkiOnOff
Type Values:
1off
2on
 .1.3.6.1.4.1.20044.25.2.2.2.24.1.2
pm404AlmLine1Line1TxPwrHighAlaPortn
Line 1 SFP Tx Power High :Alarm
indicating that the SFP output
power of port is higher than the
threshold value written in the
SFP EEPROM <Condtype> LINE1_LINE1_TX_PWR_HIGH_ALA_A
<Probcause> transmitterFailure
(56…
EKINOPS-MIBEkiOnOff
Type Values:
1off
2on
 .1.3.6.1.4.1.20044.25.2.2.2.24.1.3
pm404AlmLine1TxBiasLowAlaPortn
Line 1 SFP Bias Low :Alarm indicating
that the SFP laser bias current
of port is lower than the threshold
value written in the SFP EEPROM
<Condtype> LINE1_TX_BIAS_LOW_ALA_A
<Probcause> transmitterFailure
(56) <Ala…
EKINOPS-MIBEkiOnOff
Type Values:
1off
2on
 .1.3.6.1.4.1.20044.25.2.2.2.24.1.4
pm404AlmLine1TxBiasHighAlaPortn
Line 1 SFP Bias High :Alarm indicating
that the SFP laser bias current
of port is higher than the threshold
value written in the SFP EEPROM
<Condtype> LINE1_TX_BIAS_HIGH_ALA_A
<Probcause> transmitterFailure
(56) <…
EKINOPS-MIBEkiOnOff
Type Values:
1off
2on
 .1.3.6.1.4.1.20044.25.2.2.2.24.1.5
pm404AlmLine1VccLowAlaPortn
Line 1 SFP Power Supply Low :Alarm
indicating that the SFP power supply
of port is lower than the threshold
value written in the SFP EEPROM
<Condtype> LINE1_VCC_LOW_ALA_A
<Probcause> powerProblem (36) <Alarmtype> …
EKINOPS-MIBEkiOnOff
Type Values:
1off
2on
 .1.3.6.1.4.1.20044.25.2.2.2.24.1.6
pm404AlmLine1VccHighAlaPortn
Line 1 SFP Power Supply High :Alarm
indicating that the SFP power supply
of port is higher than the threshold
value written in the SFP EEPROM
<Condtype> LINE1_VCC_HIGH_ALA_A
<Probcause> powerProblem (36) <Alarmtyp…
EKINOPS-MIBEkiOnOff
Type Values:
1off
2on
 .1.3.6.1.4.1.20044.25.2.2.2.24.1.7
pm404AlmLine1TempLowAlaPortn
Line 1 SFP Temp Low :Alarm indicating
that the SFP temperature of port
is lower than the threshold value
written in the SFP EEPROM <Condtype>
LINE1_TEMP_LOW_ALA_A <Probcause>
temperatureUnacceptable (51) <Alarmtype…
EKINOPS-MIBEkiOnOff
Type Values:
1off
2on
 .1.3.6.1.4.1.20044.25.2.2.2.24.1.8
pm404AlmLine1TempHighAlaPortn
Line 1 SFP Temp High :Alarm indicating
that the SFP temperature of port
is higher than the threshold value
written in the SFP EEPROM <Condtype>
LINE1_TEMP_HIGH_ALA_A <Probcause>
temperatureUnacceptable (51) <Alarmt…
EKINOPS-MIBEkiOnOff
Type Values:
1off
2on
 .1.3.6.1.4.1.20044.25.2.2.2.24.1.9
pm404AlmLine1RxPwrLowAlaPortn
Line 1 SFP Rx Power Low :Alarm
indicating that the SFP input power
of port is lower than the threshold
value written in the SFP EEPROM
<Condtype> LINE1_RX_PWR_LOW_ALA_A
<Probcause> receiveFailure (41)
<Alarmtype> …
EKINOPS-MIBEkiOnOff
Type Values:
1off
2on
 .1.3.6.1.4.1.20044.25.2.2.2.24.1.16
pm404AlmLine1RxPwrHighAlaPortn
Line 1 SFP Rx Power High :Alarm
indicating that the SFP input power
of port is higher than the threshold
value written in the SFP EEPROM
<Condtype> LINE1_RX_PWR_HIGH_ALA_A
<Probcause> receiveFailure (41)
<Alarmtyp…
EKINOPS-MIBEkiOnOff
Type Values:
1off
2on
 .1.3.6.1.4.1.20044.25.2.2.2.24.1.17

pm404AlmsynthAlmLine1Table

table
.1.3.6.1.4.1.20044.25.2.2.3.8 · 1 row entry · 10 columns
Open in standard view
Uses the ekinops variant from /opt/observium/mibs/ekinops.
Command help
Walk pm404AlmsynthAlmLine1Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm404-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm404-MIB::pm404AlmsynthAlmLine1Table' 
List of pm404AlmsynthAlmLine1
Article
pm404AlmsynthAlmLine1Entry row .1.3.6.1.4.1.20044.25.2.2.3.8.1
Row definition for the pm404AlmsynthAlmLine1
table
Indexes
Column Syntax OID
pm404AlmsynthAlmLine1Index
Index definition for the pm404AlmsynthAlmLine1
table
Integer32
Constraints:
range: 0-128
 .1.3.6.1.4.1.20044.25.2.2.3.8.1.1
pm404AlmLine1SfpAbsentPortn
Line 1 SFP Absent :This OID indicates
that the SFP module is not present
in the Line 1 port. <Help> This
alarm indicates if the line 1 transceiver
is present. <Condtype> LINE1_SFP_ABSENT_A
<Probcause> inputOutput…
EKINOPS-MIBEkiOnOff
Type Values:
1off
2on
 .1.3.6.1.4.1.20044.25.2.2.3.8.1.2
pm404AlmLine1DdmAbsentPortn
DDM Supported On Line 1 SFP :This
OID indicates that the Line 1 SFP
module does not support the Digital
Diagnostic Monitoring function
<Help> This status indicates
if the line transceiver includes
the DDM featur…
EKINOPS-MIBEkiOnOff
Type Values:
1off
2on
 .1.3.6.1.4.1.20044.25.2.2.3.8.1.3
pm404AlmLine1HwFailAccPortn
Line 1 HW Fail :This OID indicates
a failure on Line 1 port, most
probably caused by a HW issue.
<Condtype> LINE1_HW_FAIL_ACC_A
<Probcause> equipmentMalfunction
(16) <Alarmtype> synthesisAlarm
(12) <Polarity> (2)
EKINOPS-MIBEkiOnOff
Type Values:
1off
2on
 .1.3.6.1.4.1.20044.25.2.2.3.8.1.5
pm404AlmLine1LsdPortn
Line 1 SFP Laser Shutdown :This
OID indicates the Line 1 SFP transmitter
output has shut down. <Help>
This status indicates if the
line 1 transceiver laser is ON
or OFF <Condtype> LINE1_LSD_A <Probcause>
other …
EKINOPS-MIBEkiOnOff
Type Values:
1off
2on
 .1.3.6.1.4.1.20044.25.2.2.3.8.1.6
pm404AlmLine1LocalOosPortn
Line 1 Port In Service :This
OID indicates that the local Line
1 port is In Service (1) or Out
of Service (2) <Help> This status
indicates if the line port 1 is
in service <Condtype> LINE1_LOCAL_OOS_A
<Probcause>…
EKINOPS-MIBEkiOnOff
Type Values:
1off
2on
 .1.3.6.1.4.1.20044.25.2.2.3.8.1.7
pm404AlmLine1DwCaisPortn
Line 1 AIS Inserted :This OID
indicates a CAIS has been inserted
on the output Line 1 port. <Help>
This status indicates if a Line
Alarm Indication Signal is currently
inserted on the line 1 interface
<Condtype>…
EKINOPS-MIBEkiOnOff
Type Values:
1off
2on
 .1.3.6.1.4.1.20044.25.2.2.3.8.1.9
pm404AlmLine1SfpDdmWarningPortn
Warning On Line 1 SFP DDM :This
OID indicates a warning is being
received from the Line 1 SFP DDM
<Help> This alarm indicates if
a DDM Warning has been detected
on the line 1 transceiver <Condtype>
LINE1_SFP_DDM…
EKINOPS-MIBEkiOnOff
Type Values:
1off
2on
 .1.3.6.1.4.1.20044.25.2.2.3.8.1.10
pm404AlmLine1SfpDdmAlmPortn
Alarm On Line 1 SFP DDM :This
OID indicates an alarm is being
received from the Line 1 SFP DDM
<Help> This alarm indicates if
a DDM Alarm has been detected on
the line 1 transceiver <Condtype>
LINE1_SFP_DDM_ALM_…
EKINOPS-MIBEkiOnOff
Type Values:
1off
2on
 .1.3.6.1.4.1.20044.25.2.2.3.8.1.11
pm404AlmLine1FailAccPortn
Line 1 Access Fail :This OID indicates
a failure on the Line 1 port <Condtype>
LINE1_FAIL_ACC_A <Probcause> equipmentMalfunction
(16) <Alarmtype> synthesisAlarm
(12) <Polarity> (2)
EKINOPS-MIBEkiOnOff
Type Values:
1off
2on
 .1.3.6.1.4.1.20044.25.2.2.3.8.1.13

pm404Almline1AccessioAlmTable

table
.1.3.6.1.4.1.20044.25.2.2.3.16 · 1 row entry · 5 columns
Open in standard view
Uses the ekinops variant from /opt/observium/mibs/ekinops.
Command help
Walk pm404Almline1AccessioAlmTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm404-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm404-MIB::pm404Almline1AccessioAlmTable' 
List of pm404Almline1AccessioAlm 
Article
pm404Almline1AccessioAlmEntry row .1.3.6.1.4.1.20044.25.2.2.3.16.1
Row definition for the pm404Almline1AccessioAlm
table
Indexes
Column Syntax OID
pm404Almline1AccessioAlmIndex
Index definition for the pm404Almline1AccessioAlm
table
Integer32
Constraints:
range: 0-128
 .1.3.6.1.4.1.20044.25.2.2.3.16.1.1
pm404AlmLine1LasFailPortn
Line 1 SFP Tx Failed :This OID
indicates that the transmitter
fails for the SFP plugged into
the Line 1 port (this alarm reports
the transmitter failure alarm generated
by the SFPs) <Help> This alarm
indicates i…
EKINOPS-MIBEkiOnOff
Type Values:
1off
2on
 .1.3.6.1.4.1.20044.25.2.2.3.16.1.2
pm404AlmLine1LosPortn
Loss Of Optical Signal On Line
1 :This OID indicates that no signal
is present on the SFP of the Line
1 port <Help> This alarm indicates
if an optical signal is detected
on the line 1 transceiver input
<Condtype…
EKINOPS-MIBEkiOnOff
Type Values:
1off
2on
 .1.3.6.1.4.1.20044.25.2.2.3.16.1.5
pm404AlmLine1LosCdrPortn
Loss Of Signal On CDR On Line
1 : <Condtype> LINE1_LOS_CDR_A
<Probcause> receiveFailure (41)
<Alarmtype> equipmentAlarm (5)
<Polarity> (2)
EKINOPS-MIBEkiOnOff
Type Values:
1off
2on
 .1.3.6.1.4.1.20044.25.2.2.3.16.1.7
pm404AlmLine1ErrSigCdrPortn
Error Signal On CDR On Line 1
: <Condtype> LINE1__ERR_SIG_CDR_A
<Probcause> receiveFailure (41)
<Alarmtype> equipmentAlarm (5)
<Polarity> (2)
EKINOPS-MIBEkiOnOff
Type Values:
1off
2on
 .1.3.6.1.4.1.20044.25.2.2.3.16.1.8

pm404Almline2SfpWarnDdmTable

table
.1.3.6.1.4.1.20044.25.2.3.1.36 · 1 row entry · 11 columns
Open in standard view
Uses the ekinops variant from /opt/observium/mibs/ekinops.
Command help
Walk pm404Almline2SfpWarnDdmTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm404-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm404-MIB::pm404Almline2SfpWarnDdmTable' 
List of pm404Almline2SfpWarnDdm 
Article
pm404Almline2SfpWarnDdmEntry row .1.3.6.1.4.1.20044.25.2.3.1.36.1
Row definition for the pm404Almline2SfpWarnDdm
table
Indexes
Column Syntax OID
pm404Almline2SfpWarnDdmIndex
Index definition for the pm404Almline2SfpWarnDdm
table
Integer32
Constraints:
range: 0-128
 .1.3.6.1.4.1.20044.25.2.3.1.36.1.1
pm404AlmLine2TxPwLowWngPortn
Line 2 SFP Tx Power Low Warning
:Warning indicating that the SFP
output power of port is lower than
the threshold value written in
the SFP EEPROM <Condtype> LINE2_TX_PW_LOW_WNG_A
<Probcause> transmitterFailure
(56…
EKINOPS-MIBEkiOnOff
Type Values:
1off
2on
 .1.3.6.1.4.1.20044.25.2.3.1.36.1.2
pm404AlmLine2TxPwrHighWngPortn
Line 2 SFP Tx Power High Warning
:Warning indicating that the SFP
output power of port is higher
than the threshold value written
in the SFP EEPROM <Condtype> LINE2_TX_PWR_HIGH_WNG_A
<Probcause> transmitterFailure
…
EKINOPS-MIBEkiOnOff
Type Values:
1off
2on
 .1.3.6.1.4.1.20044.25.2.3.1.36.1.3
pm404AlmLine2TxBiasLowWngPortn
Line 2 SFP Bias Low Warning :Warning
indicating that the SFP laser bias
current of port is lower than the
threshold value written in the
SFP EEPROM <Condtype> LINE2_TX_BIAS_LOW_WNG_A
<Probcause> transmitterFailure
…
EKINOPS-MIBEkiOnOff
Type Values:
1off
2on
 .1.3.6.1.4.1.20044.25.2.3.1.36.1.4
pm404AlmLine2TxBiasHighWngPortn
Line 2 SFP Bias High Warning :Warning
indicating that the SFP laser bias
current of port is higher than
the threshold value written in
the SFP EEPROM <Condtype> LINE2_TX_BIAS_HIGH_WNG_A
<Probcause> transmitterFailu…
EKINOPS-MIBEkiOnOff
Type Values:
1off
2on
 .1.3.6.1.4.1.20044.25.2.3.1.36.1.5
pm404AlmLine2VccLowWngPortn
Line 2 SFP Power Supply Low Warning
:Warning indicating that the SFP
power supply of port is lower than
the threshold value written in
the SFP EEPROM <Condtype> LINE2_VCC_LOW_WNG_A
<Probcause> powerProblem (36) <A…
EKINOPS-MIBEkiOnOff
Type Values:
1off
2on
 .1.3.6.1.4.1.20044.25.2.3.1.36.1.6
pm404AlmLine2VccHighWngPortn
Line 2 SFP Power Supply High Warning
:Warning indicating that the SFP
power supply of port is higher
than the threshold value written
in the SFP EEPROM <Condtype> LINE2_VCC_HIGH_WNG_A
<Probcause> powerProblem (36)…
EKINOPS-MIBEkiOnOff
Type Values:
1off
2on
 .1.3.6.1.4.1.20044.25.2.3.1.36.1.7
pm404AlmLine2TempLowWngPortn
Line 2 SFP Temp Low Warning :Warning
indicating that the SFP temperature
of port is lower than the threshold
value written in the SFP EEPROM
<Condtype> LINE2_TEMP_LOW_WNG_A
<Probcause> temperatureUnacceptable
(51)…
EKINOPS-MIBEkiOnOff
Type Values:
1off
2on
 .1.3.6.1.4.1.20044.25.2.3.1.36.1.8
pm404AlmLine2TempHighWngPortn
Line 2 SFP Temp High Warning :Warning
indicating that the SFP temperature
of port is higher than the threshold
value written in the SFP EEPROM
<Condtype> LINE2_TEMP_HIGH_WNG_A
<Probcause> temperatureUnacceptable
(…
EKINOPS-MIBEkiOnOff
Type Values:
1off
2on
 .1.3.6.1.4.1.20044.25.2.3.1.36.1.9
pm404AlmLine2RxPwrLowWngPortn
Line 2 SFP Rx Power Low Warning
:Warning indicating that the SFP
input power of port is lower than
the threshold value written in
the SFP EEPROM <Condtype> LINE2_RX_PWR_LOW_WNG_A
<Probcause> receiveFailure (41)
<A…
EKINOPS-MIBEkiOnOff
Type Values:
1off
2on
 .1.3.6.1.4.1.20044.25.2.3.1.36.1.16
pm404AlmLine2RxPwrHighWngPortn
Line 2 SFP Rx Power High Warning
:Warning indicating that the SFP
input power of port is higher than
the threshold value written in
the SFP EEPROM <Condtype> LINE2_RX_PWR_HIGH_WNG_A
<Probcause> receiveFailure (41) …
EKINOPS-MIBEkiOnOff
Type Values:
1off
2on
 .1.3.6.1.4.1.20044.25.2.3.1.36.1.17

pm404Almline2SfpAlmDdmTable

table
.1.3.6.1.4.1.20044.25.2.3.2.28 · 1 row entry · 11 columns
Open in standard view
Uses the ekinops variant from /opt/observium/mibs/ekinops.
Command help
Walk pm404Almline2SfpAlmDdmTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm404-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm404-MIB::pm404Almline2SfpAlmDdmTable' 
List of pm404Almline2SfpAlmDdm 
Article
pm404Almline2SfpAlmDdmEntry row .1.3.6.1.4.1.20044.25.2.3.2.28.1
Row definition for the pm404Almline2SfpAlmDdm
table
Indexes
Column Syntax OID
pm404Almline2SfpAlmDdmIndex
Index definition for the pm404Almline2SfpAlmDdm
table
Integer32
Constraints:
range: 0-128
 .1.3.6.1.4.1.20044.25.2.3.2.28.1.1
pm404AlmLine2TxPwrLowAlaPortn
Line 2 SFP Tx Power Low :Alarm
indicating that the SFP output
power of port is lower than the
threshold value written in the
SFP EEPROM <Condtype> LINE2_TX_PWR_LOW_ALA_A
<Probcause> transmitterFailure
(56) <Alarmt…
EKINOPS-MIBEkiOnOff
Type Values:
1off
2on
 .1.3.6.1.4.1.20044.25.2.3.2.28.1.2
pm404AlmLine2Line2TxPwrHighAlaPortn
Line 2 SFP Tx Power High :Alarm
indicating that the SFP output
power of port is higher than the
threshold value written in the
SFP EEPROM <Condtype> LINE2_LINE2_TX_PWR_HIGH_ALA_A
<Probcause> transmitterFailure
(56…
EKINOPS-MIBEkiOnOff
Type Values:
1off
2on
 .1.3.6.1.4.1.20044.25.2.3.2.28.1.3
pm404AlmLine2TxBiasLowAlaPortn
Line 2 SFP Bias Low :Alarm indicating
that the SFP laser bias current
of port is lower than the threshold
value written in the SFP EEPROM
<Condtype> LINE2_TX_BIAS_LOW_ALA_A
<Probcause> transmitterFailure
(56) <Ala…
EKINOPS-MIBEkiOnOff
Type Values:
1off
2on
 .1.3.6.1.4.1.20044.25.2.3.2.28.1.4
pm404AlmLine2TxBiasHighAlaPortn
Line 2 SFP Bias High :Alarm indicating
that the SFP laser bias current
of port is higher than the threshold
value written in the SFP EEPROM
<Condtype> LINE2_TX_BIAS_HIGH_ALA_A
<Probcause> transmitterFailure
(56) <…
EKINOPS-MIBEkiOnOff
Type Values:
1off
2on
 .1.3.6.1.4.1.20044.25.2.3.2.28.1.5
pm404AlmLine2VccLowAlaPortn
Line 2 SFP Power Supply Low :Alarm
indicating that the SFP power supply
of port is lower than the threshold
value written in the SFP EEPROM
<Condtype> LINE2_VCC_LOW_ALA_A
<Probcause> powerProblem (36) <Alarmtype> …
EKINOPS-MIBEkiOnOff
Type Values:
1off
2on
 .1.3.6.1.4.1.20044.25.2.3.2.28.1.6
pm404AlmLine2VccHighAlaPortn
Line 2 SFP Power Supply High :Alarm
indicating that the SFP power supply
of port is higher than the threshold
value written in the SFP EEPROM
<Condtype> LINE2_VCC_HIGH_ALA_A
<Probcause> powerProblem (36) <Alarmtyp…
EKINOPS-MIBEkiOnOff
Type Values:
1off
2on
 .1.3.6.1.4.1.20044.25.2.3.2.28.1.7
pm404AlmLine2TempLowAlaPortn
Line 2 SFP Temp Low :Alarm indicating
that the SFP temperature of port
is lower than the threshold value
written in the SFP EEPROM <Condtype>
LINE2_TEMP_LOW_ALA_A <Probcause>
temperatureUnacceptable (51) <Alarmtype…
EKINOPS-MIBEkiOnOff
Type Values:
1off
2on
 .1.3.6.1.4.1.20044.25.2.3.2.28.1.8
pm404AlmLine2TempHighAlaPortn
Line 2 SFP Temp High :Alarm indicating
that the SFP temperature of port
is higher than the threshold value
written in the SFP EEPROM <Condtype>
LINE2_TEMP_HIGH_ALA_A <Probcause>
temperatureUnacceptable (51) <Alarmt…
EKINOPS-MIBEkiOnOff
Type Values:
1off
2on
 .1.3.6.1.4.1.20044.25.2.3.2.28.1.9
pm404AlmLine2RxPwrLowAlaPortn
Line 2 SFP Rx Power Low :Alarm
indicating that the SFP input power
of port is lower than the threshold
value written in the SFP EEPROM
<Condtype> LINE2_RX_PWR_LOW_ALA_A
<Probcause> receiveFailure (41)
<Alarmtype> …
EKINOPS-MIBEkiOnOff
Type Values:
1off
2on
 .1.3.6.1.4.1.20044.25.2.3.2.28.1.16
pm404AlmLine2RxPwrHighAlaPortn
Line 2 SFP Rx Power High :Alarm
indicating that the SFP input power
of port is higher than the threshold
value written in the SFP EEPROM
<Condtype> LINE2_RX_PWR_HIGH_ALA_A
<Probcause> receiveFailure (41)
<Alarmtyp…
EKINOPS-MIBEkiOnOff
Type Values:
1off
2on
 .1.3.6.1.4.1.20044.25.2.3.2.28.1.17

pm404AlmsynthAlmLine2Table

table
.1.3.6.1.4.1.20044.25.2.3.3.12 · 1 row entry · 10 columns
Open in standard view
Uses the ekinops variant from /opt/observium/mibs/ekinops.
Command help
Walk pm404AlmsynthAlmLine2Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm404-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm404-MIB::pm404AlmsynthAlmLine2Table' 
List of pm404AlmsynthAlmLine2
Article
pm404AlmsynthAlmLine2Entry row .1.3.6.1.4.1.20044.25.2.3.3.12.1
Row definition for the pm404AlmsynthAlmLine2
table
Indexes
Column Syntax OID
pm404AlmsynthAlmLine2Index
Index definition for the pm404AlmsynthAlmLine2
table
Integer32
Constraints:
range: 0-128
 .1.3.6.1.4.1.20044.25.2.3.3.12.1.1
pm404AlmLine2SfpAbsentPortn
Line 2 SFP Absent :This OID indicates
that the SFP module is not present
in the Line 2 port. <Help> This
alarm indicates if the line 2 transceiver
is present. <Condtype> LINE2_SFP_ABSENT_A
<Probcause> inputOutput…
EKINOPS-MIBEkiOnOff
Type Values:
1off
2on
 .1.3.6.1.4.1.20044.25.2.3.3.12.1.2
pm404AlmLine2DdmAbsentPortn
DDM Supported On Line 2 SFP :This
OID indicates that the Line 2 SFP
module does not support the Digital
Diagnostic Monitoring function
<Help> This status indicates
if the line transceiver includes
the DDM featur…
EKINOPS-MIBEkiOnOff
Type Values:
1off
2on
 .1.3.6.1.4.1.20044.25.2.3.3.12.1.3
pm404AlmLine2HwFailPortn
Line 2 HW Fail :This OID indicates
a failure on Line 2 port, most
probably caused by a HW issue.
<Condtype> LINE2_HW_FAIL_A <Probcause>
equipmentMalfunction (16) <Alarmtype>
synthesisAlarm (12) <Polarity>
(2)
EKINOPS-MIBEkiOnOff
Type Values:
1off
2on
 .1.3.6.1.4.1.20044.25.2.3.3.12.1.5
pm404AlmLine2LsdPortn
Line 2 SFP Laser Shutdown :This
OID indicates the Line 2 SFP transmitter
output has shut down. <Help>
This status indicates if the
line 2 transceiver laser is ON
or OFF <Condtype> LINE2_LSD_A <Probcause>
other …
EKINOPS-MIBEkiOnOff
Type Values:
1off
2on
 .1.3.6.1.4.1.20044.25.2.3.3.12.1.6
pm404AlmLine2LocalOosPortn
Line 2 Port In Servicee :This
OID indicates that the local Line
2 port is In Service (1) or Out
of Service (2) <Help> This status
indicates if the line port 2 is
in service <Condtype> LINE2_LOCAL_OOS_A
<Probcaus…
EKINOPS-MIBEkiOnOff
Type Values:
1off
2on
 .1.3.6.1.4.1.20044.25.2.3.3.12.1.7
pm404AlmLine2DwCaisPortn
Line 2 AIS Inserted :This OID
indicates a CAIS has been inserted
on the output Line 2 port. <Help>
This status indicates if a Line
Alarm Indication Signal is currently
inserted on the line 2 interface
<Condtype>…
EKINOPS-MIBEkiOnOff
Type Values:
1off
2on
 .1.3.6.1.4.1.20044.25.2.3.3.12.1.9
pm404AlmLine2DdmWarningPortn
Warning On Line 2 SFP DDM :This
OID indicates a warning is being
received from the Line 2 SFP DDM
<Help> This alarm indicates if
a DDM Warning has been detected
on the line 2 transceiver <Condtype>
LINE2_DDM_WAR…
EKINOPS-MIBEkiOnOff
Type Values:
1off
2on
 .1.3.6.1.4.1.20044.25.2.3.3.12.1.10
pm404AlmLine2DdmAlmPortn
Alarm On Line 2 SFP DDM :This
OID indicates an alarm is being
received from the Line 2 SFP DDM
<Help> This alarm indicates if
a DDM Alarm has been detected on
the line 2 transceiver <Condtype>
LINE2_DDM_ALM_A <P…
EKINOPS-MIBEkiOnOff
Type Values:
1off
2on
 .1.3.6.1.4.1.20044.25.2.3.3.12.1.11
pm404AlmLine2FailPortn
Line 2 Access Fail :This OID indicates
a failure on the Line 2 port <Condtype>
LINE2_FAIL_A <Probcause> equipmentMalfunction
(16) <Alarmtype> synthesisAlarm
(12) <Polarity> (2)
EKINOPS-MIBEkiOnOff
Type Values:
1off
2on
 .1.3.6.1.4.1.20044.25.2.3.3.12.1.13

pm404Almline2AccessioAlmTable

table
.1.3.6.1.4.1.20044.25.2.3.3.20 · 1 row entry · 5 columns
Open in standard view
Uses the ekinops variant from /opt/observium/mibs/ekinops.
Command help
Walk pm404Almline2AccessioAlmTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm404-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm404-MIB::pm404Almline2AccessioAlmTable' 
List of pm404Almline2AccessioAlm 
Article
pm404Almline2AccessioAlmEntry row .1.3.6.1.4.1.20044.25.2.3.3.20.1
Row definition for the pm404Almline2AccessioAlm
table
Indexes
Column Syntax OID
pm404Almline2AccessioAlmIndex
Index definition for the pm404Almline2AccessioAlm
table
Integer32
Constraints:
range: 0-128
 .1.3.6.1.4.1.20044.25.2.3.3.20.1.1
pm404AlmLine2LasFailPortn
Line 2 SFP Tx Failed :This OID
indicates that the transmitter
fails for the SFP plugged into
the Line 2 port (this alarm reports
the transmitter failure alarm generated
by the SFPs) <Help> This alarm
indicates i…
EKINOPS-MIBEkiOnOff
Type Values:
1off
2on
 .1.3.6.1.4.1.20044.25.2.3.3.20.1.2
pm404AlmLine2LosPortn
Loss Of Optical Signal On Line
2 :This OID indicates that no signal
is present on the SFP of the Line
2 port <Help> This alarm indicates
if an optical signal is detected
on the line 2 transceiver input
<Condtype…
EKINOPS-MIBEkiOnOff
Type Values:
1off
2on
 .1.3.6.1.4.1.20044.25.2.3.3.20.1.5
pm404AlmLine2LosCdrPortn
Loss Of Signal On CDR On Line
2 : <Condtype> LINE2_LOS_CDR_A
<Probcause> receiveFailure (41)
<Alarmtype> equipmentAlarm (5)
<Polarity> (2)
EKINOPS-MIBEkiOnOff
Type Values:
1off
2on
 .1.3.6.1.4.1.20044.25.2.3.3.20.1.7
pm404AlmLine2ErrSigCdrPortn
Error Signal On CDR On Line 2
: <Condtype> LINE2__ERR_SIG_CDR_A
<Probcause> receiveFailure (41)
<Alarmtype> equipmentAlarm (5)
<Polarity> (2)
EKINOPS-MIBEkiOnOff
Type Values:
1off
2on
 .1.3.6.1.4.1.20044.25.2.3.3.20.1.8

pm404Mesrline1TemperatureTable

table
.1.3.6.1.4.1.20044.25.3.2.16 · 1 row entry · 2 columns
Open in standard view
Uses the ekinops variant from /opt/observium/mibs/ekinops.
Command help
Walk pm404Mesrline1TemperatureTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm404-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm404-MIB::pm404Mesrline1TemperatureTable' 
List of pm404Mesrline1Temperature 
Article
pm404Mesrline1TemperatureEntry row .1.3.6.1.4.1.20044.25.3.2.16.1
Row definition for the pm404Mesrline1Temperature
table
Indexes
Column Syntax OID
pm404Mesrline1TemperatureIndex
Index definition for the pm404Mesrline1Temperature
table
Integer32
Constraints:
range: 0-128
 .1.3.6.1.4.1.20044.25.3.2.16.1.1
pm404Mesrline1TemperaturePortn
Line 1 SFP Temperature :This OID
gives the temperature value of
the SFP, read from the DDM (Digital
Diagnostic Monitoring) (Temperature
= AV/256) (Unit = C) <Help> This
measure gives the temperature of
the line…
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.20044.25.3.2.16.1.2

pm404Mesrline1VoltTable

table
.1.3.6.1.4.1.20044.25.3.2.24 · 1 row entry · 2 columns
Open in standard view
Uses the ekinops variant from /opt/observium/mibs/ekinops.
Command help
Walk pm404Mesrline1VoltTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm404-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm404-MIB::pm404Mesrline1VoltTable' 
List of pm404Mesrline1Volt Article
pm404Mesrline1VoltEntry row .1.3.6.1.4.1.20044.25.3.2.24.1
Row definition for the pm404Mesrline1Volt
table
Indexes
Column Syntax OID
pm404Mesrline1VoltIndex
Index definition for the pm404Mesrline1Volt
table
Integer32
Constraints:
range: 0-128
 .1.3.6.1.4.1.20044.25.3.2.24.1.1
pm404Mesrline1VoltPortn
Line 1 SFP Power Supply :This
OID gives the 3V3 voltage value
of the SFP plugged into port, read
from the DDM (Digital Diagnostic
Monitoring) (Voltage = AV/10000)
(Unit = V) <Help> This measure
gives the 3V3 vol…
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.20044.25.3.2.24.1.2

pm404Mesrline1TxBiasTable

table
.1.3.6.1.4.1.20044.25.3.2.32 · 1 row entry · 2 columns
Open in standard view
Uses the ekinops variant from /opt/observium/mibs/ekinops.
Command help
Walk pm404Mesrline1TxBiasTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm404-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm404-MIB::pm404Mesrline1TxBiasTable' 
List of pm404Mesrline1TxBias Article
pm404Mesrline1TxBiasEntry row .1.3.6.1.4.1.20044.25.3.2.32.1
Row definition for the pm404Mesrline1TxBias
table
Indexes
Column Syntax OID
pm404Mesrline1TxBiasIndex
Index definition for the pm404Mesrline1TxBias
table
Integer32
Constraints:
range: 0-128
 .1.3.6.1.4.1.20044.25.3.2.32.1.1
pm404Mesrline1TxBiasPortn
Line 1 SFP Laser Bias :This OID
gives the bias value of the SFP,
read from the DDM (Digital Diagnostic
Monitoring) (Bias = AV/500) (Unit
= mA) <Help> This measure gives
the bias of the line 1 transceiver
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.20044.25.3.2.32.1.2

pm404Mesrline1TxPowerTable

table
.1.3.6.1.4.1.20044.25.3.2.40 · 1 row entry · 2 columns
Open in standard view
Uses the ekinops variant from /opt/observium/mibs/ekinops.
Command help
Walk pm404Mesrline1TxPowerTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm404-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm404-MIB::pm404Mesrline1TxPowerTable' 
List of pm404Mesrline1TxPower
Article
pm404Mesrline1TxPowerEntry row .1.3.6.1.4.1.20044.25.3.2.40.1
Row definition for the pm404Mesrline1TxPower
table
Indexes
Column Syntax OID
pm404Mesrline1TxPowerIndex
Index definition for the pm404Mesrline1TxPower
table
Integer32
Constraints:
range: 0-128
 .1.3.6.1.4.1.20044.25.3.2.40.1.1
pm404Mesrline1TxPowerPortn
Line 1 SFP Tx Power :This OID
gives the transmit power value
of the SFP, read from the DDM
(Digital Diagnostic Monitoring)
(Power = 10*log(AV)-40) (Unit =
dBm) <Help> This measure gives
the Tx optical power of …
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.20044.25.3.2.40.1.2

pm404Mesrline1RxPowerTable

table
.1.3.6.1.4.1.20044.25.3.2.48 · 1 row entry · 2 columns
Open in standard view
Uses the ekinops variant from /opt/observium/mibs/ekinops.
Command help
Walk pm404Mesrline1RxPowerTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm404-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm404-MIB::pm404Mesrline1RxPowerTable' 
List of pm404Mesrline1RxPower
Article
pm404Mesrline1RxPowerEntry row .1.3.6.1.4.1.20044.25.3.2.48.1
Row definition for the pm404Mesrline1RxPower
table
Indexes
Column Syntax OID
pm404Mesrline1RxPowerIndex
Index definition for the pm404Mesrline1RxPower
table
Integer32
Constraints:
range: 0-128
 .1.3.6.1.4.1.20044.25.3.2.48.1.1
pm404Mesrline1RxPowerPortn
Line 1 SFP Rx Power :This OID
gives the receive power value
of the SFP, read in the DDM (Digital
Diagnostic Monitoring) (Power =
10*log(AV)-40) (Unit = dBm) <Help>
This measure gives the Rx optical
power of the…
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.20044.25.3.2.48.1.2

pm404Mesrline2TemperatureTable

table
.1.3.6.1.4.1.20044.25.3.3.20 · 1 row entry · 2 columns
Open in standard view
Uses the ekinops variant from /opt/observium/mibs/ekinops.
Command help
Walk pm404Mesrline2TemperatureTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm404-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm404-MIB::pm404Mesrline2TemperatureTable' 
List of pm404Mesrline2Temperature 
Article
pm404Mesrline2TemperatureEntry row .1.3.6.1.4.1.20044.25.3.3.20.1
Row definition for the pm404Mesrline2Temperature
table
Indexes
Column Syntax OID
pm404Mesrline2TemperatureIndex
Index definition for the pm404Mesrline2Temperature
table
Integer32
Constraints:
range: 0-128
 .1.3.6.1.4.1.20044.25.3.3.20.1.1
pm404Mesrline2TemperaturePortn
Line 2 SFP Temperature :This OID
gives the temperature value of
the SFP, read from the DDM (Digital
Diagnostic Monitoring) (Temperature
= AV/256) (Unit = C) <Help> This
measure gives the temperature of
the line…
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.20044.25.3.3.20.1.2

pm404Mesrline2VoltTable

table
.1.3.6.1.4.1.20044.25.3.3.28 · 1 row entry · 2 columns
Open in standard view
Uses the ekinops variant from /opt/observium/mibs/ekinops.
Command help
Walk pm404Mesrline2VoltTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm404-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm404-MIB::pm404Mesrline2VoltTable' 
List of pm404Mesrline2Volt Article
pm404Mesrline2VoltEntry row .1.3.6.1.4.1.20044.25.3.3.28.1
Row definition for the pm404Mesrline2Volt
table
Indexes
Column Syntax OID
pm404Mesrline2VoltIndex
Index definition for the pm404Mesrline2Volt
table
Integer32
Constraints:
range: 0-128
 .1.3.6.1.4.1.20044.25.3.3.28.1.1
pm404Mesrline2VoltPortn
Line 2 SFP Power Supply :This
OID gives the 3V3 voltage value
of the SFP, read from the DDM
(Digital Diagnostic Monitoring)
(Voltage = AV/10000) (Unit = V)
<Help> This measure gives the
3V3 voltage of the line …
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.20044.25.3.3.28.1.2

pm404Mesrline2TxBiasTable

table
.1.3.6.1.4.1.20044.25.3.3.36 · 1 row entry · 2 columns
Open in standard view
Uses the ekinops variant from /opt/observium/mibs/ekinops.
Command help
Walk pm404Mesrline2TxBiasTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm404-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm404-MIB::pm404Mesrline2TxBiasTable' 
List of pm404Mesrline2TxBias Article
pm404Mesrline2TxBiasEntry row .1.3.6.1.4.1.20044.25.3.3.36.1
Row definition for the pm404Mesrline2TxBias
table
Indexes
Column Syntax OID
pm404Mesrline2TxBiasIndex
Index definition for the pm404Mesrline2TxBias
table
Integer32
Constraints:
range: 0-128
 .1.3.6.1.4.1.20044.25.3.3.36.1.1
pm404Mesrline2TxBiasPortn
Line 2 SFP Laser Bias :This OID
gives the bias value of the SFP,
read from the DDM (Digital Diagnostic
Monitoring) (Bias = AV/500) (Unit
= mA) <Help> This measure gives
the bias of the line 2 transceiver
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.20044.25.3.3.36.1.2

pm404Mesrline2TxPowerTable

table
.1.3.6.1.4.1.20044.25.3.3.44 · 1 row entry · 2 columns
Open in standard view
Uses the ekinops variant from /opt/observium/mibs/ekinops.
Command help
Walk pm404Mesrline2TxPowerTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm404-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm404-MIB::pm404Mesrline2TxPowerTable' 
List of pm404Mesrline2TxPower
Article
pm404Mesrline2TxPowerEntry row .1.3.6.1.4.1.20044.25.3.3.44.1
Row definition for the pm404Mesrline2TxPower
table
Indexes
Column Syntax OID
pm404Mesrline2TxPowerIndex
Index definition for the pm404Mesrline2TxPower
table
Integer32
Constraints:
range: 0-128
 .1.3.6.1.4.1.20044.25.3.3.44.1.1
pm404Mesrline2TxPowerPortn
Line 2 SFP Tx Power :This OID
gives the transmit power value
of the SFP, read from the DDM
(Digital Diagnostic Monitoring)
(Power = 10*log(AV)-40) (Unit =
dBm) <Help> This measure gives
the Tx optical power of …
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.20044.25.3.3.44.1.2

pm404Mesrline2RxPowerTable

table
.1.3.6.1.4.1.20044.25.3.3.52 · 1 row entry · 2 columns
Open in standard view
Uses the ekinops variant from /opt/observium/mibs/ekinops.
Command help
Walk pm404Mesrline2RxPowerTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm404-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm404-MIB::pm404Mesrline2RxPowerTable' 
List of pm404Mesrline2RxPower
Article
pm404Mesrline2RxPowerEntry row .1.3.6.1.4.1.20044.25.3.3.52.1
Row definition for the pm404Mesrline2RxPower
table
Indexes
Column Syntax OID
pm404Mesrline2RxPowerIndex
Index definition for the pm404Mesrline2RxPower
table
Integer32
Constraints:
range: 0-128
 .1.3.6.1.4.1.20044.25.3.3.52.1.1
pm404Mesrline2RxPowerPortn
Line 2 SFP Rx Power :This OID
gives the receive power value
of the SFP, read in the DDM (Digital
Diagnostic Monitoring) (Power =
10*log(AV)-40) (Unit = dBm) <Help>
This measure gives the Rx optical
power of the…
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.20044.25.3.3.52.1.2

pm404Ctrlline1SfpOnoffTable

table
.1.3.6.1.4.1.20044.25.6.2.16 · 1 row entry · 2 columns
Open in standard view
Uses the ekinops variant from /opt/observium/mibs/ekinops.
Command help
Walk pm404Ctrlline1SfpOnoffTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm404-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm404-MIB::pm404Ctrlline1SfpOnoffTable' 
List of pm404Ctrlline1SfpOnoff 
Article
pm404Ctrlline1SfpOnoffEntry row .1.3.6.1.4.1.20044.25.6.2.16.1
Row definition for the pm404Ctrlline1SfpOnoff
table
Indexes
Column Syntax OID
pm404Ctrlline1SfpOnoffIndex
Index definition for the pm404Ctrlline1SfpOnoff
table
Integer32
Constraints:
range: 0-128
 .1.3.6.1.4.1.20044.25.6.2.16.1.1
pm404Ctrlline1SfpOnoffPortn
Line 1 SFP Laser Shutdown :This
OID switches off the SFP <Help>
This control defines the laser
state of the line 1 transceiver
EKINOPS-MIBEkiStater/w
Type Values:
1disabled
2enabled
 .1.3.6.1.4.1.20044.25.6.2.16.1.2

pm404Ctrlline1LoopbackTable

table
.1.3.6.1.4.1.20044.25.6.2.17 · 1 row entry · 2 columns
Open in standard view
Uses the ekinops variant from /opt/observium/mibs/ekinops.
Command help
Walk pm404Ctrlline1LoopbackTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm404-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm404-MIB::pm404Ctrlline1LoopbackTable' 
List of pm404Ctrlline1Loopback 
Article
pm404Ctrlline1LoopbackEntry row .1.3.6.1.4.1.20044.25.6.2.17.1
Row definition for the pm404Ctrlline1Loopback
table
Indexes
Column Syntax OID
pm404Ctrlline1LoopbackIndex
Index definition for the pm404Ctrlline1Loopback
table
Integer32
Constraints:
range: 0-128
 .1.3.6.1.4.1.20044.25.6.2.17.1.1
pm404Ctrlline1LoopbackPortn
Line 1 Facility Loopback :This
OID operates a Client Facility
Loopback, looping client input
signal on the client output port.
The loop is located on the client
transceiver <Help> This maintenance
parameter opera…
EKINOPS-MIBEkiStater/w
Type Values:
1disabled
2enabled
 .1.3.6.1.4.1.20044.25.6.2.17.1.2

pm404Ctrlline1LoopbackTermTable

table
.1.3.6.1.4.1.20044.25.6.2.18 · 1 row entry · 2 columns
Open in standard view
Uses the ekinops variant from /opt/observium/mibs/ekinops.
Command help
Walk pm404Ctrlline1LoopbackTermTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm404-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm404-MIB::pm404Ctrlline1LoopbackTermTable' 
List of pm404Ctrlline1LoopbackTerm 
Article
pm404Ctrlline1LoopbackTermEntry row .1.3.6.1.4.1.20044.25.6.2.18.1
Row definition for the pm404Ctrlline1LoopbackTerm
table
Indexes
Column Syntax OID
pm404Ctrlline1LoopbackTermIndex
Index definition for the pm404Ctrlline1LoopbackTerm
table
Integer32
Constraints:
range: 0-128
 .1.3.6.1.4.1.20044.25.6.2.18.1.1
pm404Ctrlline1LoopbackTermPortn
Line 1 Terminal Loopback :This
OID operates a Client Terminal
Loopback, looping client input
signal on the client output port.
The loop is located on the line
transceiver <Help> This maintenance
parameter operate…
EKINOPS-MIBEkiStater/w
Type Values:
1disabled
2enabled
 .1.3.6.1.4.1.20044.25.6.2.18.1.2

pm404Ctrlline1OosModeTable

table
.1.3.6.1.4.1.20044.25.6.2.20 · 1 row entry · 2 columns
Open in standard view
Uses the ekinops variant from /opt/observium/mibs/ekinops.
Command help
Walk pm404Ctrlline1OosModeTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm404-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm404-MIB::pm404Ctrlline1OosModeTable' 
List of pm404Ctrlline1OosMode
Article
pm404Ctrlline1OosModeEntry row .1.3.6.1.4.1.20044.25.6.2.20.1
Row definition for the pm404Ctrlline1OosMode
table
Indexes
Column Syntax OID
pm404Ctrlline1OosModeIndex
Index definition for the pm404Ctrlline1OosMode
table
Integer32
Constraints:
range: 0-128
 .1.3.6.1.4.1.20044.25.6.2.20.1.1
pm404Ctrlline1OosModePortn
Line 1 Port Out Of Service :This
OID sets the port Out Of Service
<Help> This controls defines
the service state of the line
1 port
EKINOPS-MIBEkiStater/w
Type Values:
1disabled
2enabled
 .1.3.6.1.4.1.20044.25.6.2.20.1.2

pm404CtrlprotocolTable

table
.1.3.6.1.4.1.20044.25.6.2.48 · 1 row entry · 2 columns
Open in standard view
Uses the ekinops variant from /opt/observium/mibs/ekinops.
Command help
Walk pm404CtrlprotocolTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm404-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm404-MIB::pm404CtrlprotocolTable' 
List of pm404Ctrlprotocol Article
pm404CtrlprotocolEntry row .1.3.6.1.4.1.20044.25.6.2.48.1
Row definition for the pm404Ctrlprotocol
table
Indexes
Column Syntax OID
pm404CtrlprotocolIndex
Index definition for the pm404Ctrlprotocol
table
Integer32
Constraints:
range: 0-128
 .1.3.6.1.4.1.20044.25.6.2.48.1.1
pm404CtrlprotocolPortn
Lines Bitrate: This OID sets the
protocol of the lines port.
EKINOPS-MIBEkiProtocolr/w
Type Values:
1protGBE
2prot1GFC
3prot2GFC
4protOC48
6protclearchannel
8prot10GBE
9protOC192
10protStm1
11protStm4
12prot2GBE
13prot4GFC
14protEscon
15protFastEth
 .1.3.6.1.4.1.20044.25.6.2.48.1.2

pm404Ctrlline2SfpOnoffTable

table
.1.3.6.1.4.1.20044.25.6.3.64 · 1 row entry · 2 columns
Open in standard view
Uses the ekinops variant from /opt/observium/mibs/ekinops.
Command help
Walk pm404Ctrlline2SfpOnoffTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm404-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm404-MIB::pm404Ctrlline2SfpOnoffTable' 
List of pm404Ctrlline2SfpOnoff 
Article
pm404Ctrlline2SfpOnoffEntry row .1.3.6.1.4.1.20044.25.6.3.64.1
Row definition for the pm404Ctrlline2SfpOnoff
table
Indexes
Column Syntax OID
pm404Ctrlline2SfpOnoffIndex
Index definition for the pm404Ctrlline2SfpOnoff
table
Integer32
Constraints:
range: 0-128
 .1.3.6.1.4.1.20044.25.6.3.64.1.1
pm404Ctrlline2SfpOnoffPortn
Line 2 SFP Laser Shutdown :This
OID switches off the SFP <Help>
This control defines the laser
state of the line 2 transceiver
EKINOPS-MIBEkiStater/w
Type Values:
1disabled
2enabled
 .1.3.6.1.4.1.20044.25.6.3.64.1.2

pm404Ctrlline2OosModeTable

table
.1.3.6.1.4.1.20044.25.6.3.65 · 1 row entry · 2 columns
Open in standard view
Uses the ekinops variant from /opt/observium/mibs/ekinops.
Command help
Walk pm404Ctrlline2OosModeTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm404-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm404-MIB::pm404Ctrlline2OosModeTable' 
List of pm404Ctrlline2OosMode
Article
pm404Ctrlline2OosModeEntry row .1.3.6.1.4.1.20044.25.6.3.65.1
Row definition for the pm404Ctrlline2OosMode
table
Indexes
Column Syntax OID
pm404Ctrlline2OosModeIndex
Index definition for the pm404Ctrlline2OosMode
table
Integer32
Constraints:
range: 0-128
 .1.3.6.1.4.1.20044.25.6.3.65.1.1
pm404Ctrlline2OosModePortn
Line 2 Port Out Of Service :This
OID sets the port Out Of Service
<Help> This controls defines
the service state of the line
2 port
EKINOPS-MIBEkiStater/w
Type Values:
1disabled
2enabled
 .1.3.6.1.4.1.20044.25.6.3.65.1.2

pm404Ctrlline2LoopbackTable

table
.1.3.6.1.4.1.20044.25.6.3.66 · 1 row entry · 2 columns
Open in standard view
Uses the ekinops variant from /opt/observium/mibs/ekinops.
Command help
Walk pm404Ctrlline2LoopbackTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm404-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm404-MIB::pm404Ctrlline2LoopbackTable' 
List of pm404Ctrlline2Loopback 
Article
pm404Ctrlline2LoopbackEntry row .1.3.6.1.4.1.20044.25.6.3.66.1
Row definition for the pm404Ctrlline2Loopback
table
Indexes
Column Syntax OID
pm404Ctrlline2LoopbackIndex
Index definition for the pm404Ctrlline2Loopback
table
Integer32
Constraints:
range: 0-128
 .1.3.6.1.4.1.20044.25.6.3.66.1.1
pm404Ctrlline2LoopbackPortn
Line 2 Facility Loopback :This
OID operates a Line Facility Loopback,
looping line input signal on the
line output port. The loop is located
on the line transceiver. If the
Line signal carries DCC, the management
…
EKINOPS-MIBEkiStater/w
Type Values:
1disabled
2enabled
 .1.3.6.1.4.1.20044.25.6.3.66.1.2

pm404Ctrlline2LoopbackTermTable

table
.1.3.6.1.4.1.20044.25.6.3.67 · 1 row entry · 2 columns
Open in standard view
Uses the ekinops variant from /opt/observium/mibs/ekinops.
Command help
Walk pm404Ctrlline2LoopbackTermTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm404-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm404-MIB::pm404Ctrlline2LoopbackTermTable' 
List of pm404Ctrlline2LoopbackTerm 
Article
pm404Ctrlline2LoopbackTermEntry row .1.3.6.1.4.1.20044.25.6.3.67.1
Row definition for the pm404Ctrlline2LoopbackTerm
table
Indexes
Column Syntax OID
pm404Ctrlline2LoopbackTermIndex
Index definition for the pm404Ctrlline2LoopbackTerm
table
Integer32
Constraints:
range: 0-128
 .1.3.6.1.4.1.20044.25.6.3.67.1.1
pm404Ctrlline2LoopbackTermPortn
Line 2 Terminal Loopback :This
OID operates a Line Terminal Loopback,
looping line input signal on the
line output port. The loop is located
on all client transceivers <Help>
This maintenance parameter operates
a…
EKINOPS-MIBEkiStater/w
Type Values:
1disabled
2enabled
 .1.3.6.1.4.1.20044.25.6.3.67.1.2

pm404RinvLine1Table

table
.1.3.6.1.4.1.20044.25.7.1.1 · 1 row entry · 2 columns
Open in standard view
Uses the ekinops variant from /opt/observium/mibs/ekinops.
Command help
Walk pm404RinvLine1Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm404-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm404-MIB::pm404RinvLine1Table' 
List of the SFPs on the selected module
pm404RinvLine1Entry row .1.3.6.1.4.1.20044.25.7.1.1.1
Row definition for the Line1 SFP table
Indexes
Column Syntax OID
pm404RinvLine1Index
Index for Line1 SFP table
Integer32
Constraints:
range: 1-16
 .1.3.6.1.4.1.20044.25.7.1.1.1.1
pm404RinvSfpLine1
Inventory for the SFP: This OID contains the inventory for the Line1 SFP
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20044.25.7.1.1.1.2

pm404RinvLine2Table

table
.1.3.6.1.4.1.20044.25.7.1.2 · 1 row entry · 2 columns
Open in standard view
Uses the ekinops variant from /opt/observium/mibs/ekinops.
Command help
Walk pm404RinvLine2Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm404-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm404-MIB::pm404RinvLine2Table' 
List of the SFPs on the selected module
pm404RinvLine2Entry row .1.3.6.1.4.1.20044.25.7.1.2.1
Row definition for the Line SFP table
Indexes
Column Syntax OID
pm404RinvLine2Index
Index for SFP table
Integer32
Constraints:
range: 1-16
 .1.3.6.1.4.1.20044.25.7.1.2.1.1
pm404RinvsfpLine2
Inventory for the SFP: This OID contains the inventory for the Line2 SFP
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20044.25.7.1.2.1.2

pm404CfgLine1LsdTable

table
.1.3.6.1.4.1.20044.25.9.1.1 · 1 row entry · 4 columns
Open in standard view
Uses the ekinops variant from /opt/observium/mibs/ekinops.
Command help
Walk pm404CfgLine1LsdTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm404-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm404-MIB::pm404CfgLine1LsdTable' 
List of  Article
pm404CfgLine1LsdEntry row .1.3.6.1.4.1.20044.25.9.1.1.1
Row definition for the lsd table
Indexes
Column Syntax OID
pm404CfgLine1LsdIndex
Index definition for the line1Lsd
table
Integer32
Constraints:
range: 0-128
 .1.3.6.1.4.1.20044.25.9.1.1.1.1
pm404CfgLine1LsdModePortn
CAIS mode on Lines Port :This
register selects the way to activate
the laser upon CAIS/CSF criteria
detection on Port
Unsigned32r/w
Constraints:
range: 0-65536
 .1.3.6.1.4.1.20044.25.9.1.1.1.3
pm404CfgLine1AccessioCtrbInsPortn
CAIS contributors on Line 1 Port
:This register selects the contributors
to upstream CAIS/CSF on Port
Unsigned32r/w
Constraints:
range: 0-65536
 .1.3.6.1.4.1.20044.25.9.1.1.1.4
pm404CfgLine2AccessioCtrbInsPortn
CAIS contributors on Lne 2 Port
:This register selects the contributors
to downstream CAIS/CSF on Port
Unsigned32r/w
Constraints:
range: 0-65536
 .1.3.6.1.4.1.20044.25.9.1.1.1.7

pm404CfgLine1StartupTable

table
.1.3.6.1.4.1.20044.25.9.2.1 · 1 row entry · 4 columns
Open in standard view
Uses the ekinops variant from /opt/observium/mibs/ekinops.
Command help
Walk pm404CfgLine1StartupTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm404-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm404-MIB::pm404CfgLine1StartupTable' 
List of  Article
pm404CfgLine1StartupEntry row .1.3.6.1.4.1.20044.25.9.2.1.1
Row definition for the startUp
table
Indexes
Column Syntax OID
pm404CfgLine1StartupIndex
Index definition for the line1Startup
table
Integer32
Constraints:
range: 0-128
 .1.3.6.1.4.1.20044.25.9.2.1.1.1
pm404CfgLine1TrscvCtrlPortn
Default Settings on Line 1 TRSCV
:This register configures the
default initialisation settings
on client transceiver.
Unsigned32r/w
Constraints:
range: 0-65536
 .1.3.6.1.4.1.20044.25.9.2.1.1.3
pm404CfgLine1ProtocolPortn
Default Protocol on Line 1 :This
register configures the default
initialisation protocol on the
port.
Unsigned32r/w
Constraints:
range: 0-65536
 .1.3.6.1.4.1.20044.25.9.2.1.1.4
pm404CfgLine1OosModePortn
Default Settings on Line 1 TRSCV
:This register configures the
default initialisation settings
on client transceiver.
Unsigned32r/w
Constraints:
range: 0-65536
 .1.3.6.1.4.1.20044.25.9.2.1.1.5

pm404CfgLine2StartupTable

table
.1.3.6.1.4.1.20044.25.9.2.2 · 1 row entry · 3 columns
Open in standard view
Uses the ekinops variant from /opt/observium/mibs/ekinops.
Command help
Walk pm404CfgLine2StartupTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm404-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm404-MIB::pm404CfgLine2StartupTable' 
List of  Article
pm404CfgLine2StartupEntry row .1.3.6.1.4.1.20044.25.9.2.2.1
Row definition for the startUp
table
Indexes
Column Syntax OID
pm404CfgLine2StartupIndex
Index definition for the line2Startup
table
Integer32
Constraints:
range: 0-128
 .1.3.6.1.4.1.20044.25.9.2.2.1.1
pm404CfgLine2TrscvCtrlPortn
Default Settings on Line 2 TRSCV
:This register configures the
default initialisation settings
on line transceiver.
Unsigned32r/w
Constraints:
range: 0-65536
 .1.3.6.1.4.1.20044.25.9.2.2.1.3
pm404CfgLine2OosModePortn
Default Settings on Line 2 TRSCV
:This register configures the
default initialisation settings
on line transceiver.
Unsigned32r/w
Constraints:
range: 0-65536
 .1.3.6.1.4.1.20044.25.9.2.2.1.4

pm404CfgLabelclientTable

table
.1.3.6.1.4.1.20044.25.9.3.1 · 1 row entry · 2 columns
Open in standard view
Uses the ekinops variant from /opt/observium/mibs/ekinops.
Command help
Walk pm404CfgLabelclientTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm404-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm404-MIB::pm404CfgLabelclientTable' 
List of  Article
pm404CfgLabelclientEntry row .1.3.6.1.4.1.20044.25.9.3.1.1
Row definition for the labels
table
Indexes
Column Syntax OID
pm404CfgLabelclientIndex
Index definition for the labelclient
table
Integer32
Constraints:
range: 0-128
 .1.3.6.1.4.1.20044.25.9.3.1.1.1
pm404CfgLabelclientPortn
Default settings on the label
of the Ports :These registers
configures the default initialisation
settings of the labels of the ports.
SNMPv2-TCDisplayStringr/w
Constraints:
range: 1-16
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20044.25.9.3.1.1.3

pm404CfgLabellineTable

table
.1.3.6.1.4.1.20044.25.9.3.2 · 1 row entry · 2 columns
Open in standard view
Uses the ekinops variant from /opt/observium/mibs/ekinops.
Command help
Walk pm404CfgLabellineTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm404-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm404-MIB::pm404CfgLabellineTable' 
List of  Article
pm404CfgLabellineEntry row .1.3.6.1.4.1.20044.25.9.3.2.1
Row definition for the labels
table
Indexes
Column Syntax OID
pm404CfgLabellineIndex
Index definition for the labelline
table
Integer32
Constraints:
range: 0-128
 .1.3.6.1.4.1.20044.25.9.3.2.1.1
pm404CfgLabellinePortn
Default settings on the label
of the lines :These registers
configures the default initialisation
settings of the labels of the lines.
SNMPv2-TCDisplayStringr/w
Constraints:
range: 1-16
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20044.25.9.3.2.1.3