EKINOPS-Pm254d-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view

Tables

Rows

Columns

214

pm254dAlmclientSfpWarnDdmTable

table

.1.3.6.1.4.1.20044.17.2.2.1.48 · 1 row entry · 11 columns

Open in standard view

Uses the ekinops variant from /opt/observium/mibs/ekinops.

Command help

Walk pm254dAlmclientSfpWarnDdmTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm254d-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm254d-MIB::pm254dAlmclientSfpWarnDdmTable'

List of pm254dAlmclientSfpWarnDdm 
Article

pm254dAlmclientSfpWarnDdmEntry row .1.3.6.1.4.1.20044.17.2.2.1.48.1

Row definition for the pm254dAlmclientSfpWarnDdm
table

Indexes

pm254dAlmclientSfpWarnDdmIndex

Column Syntax OID

pm254dAlmclientSfpWarnDdmIndex

Index definition for the pm254dAlmclientSfpWarnDdm
table

Integer32

Constraints:
range: 0-128

.1.3.6.1.4.1.20044.17.2.2.1.48.1.1

pm254dAlmClientTxPwLowWngPortn

Client SFP Tx Power Low Warning
:Warning indicating that the SFP
output power of port is lower than
the threshold value written in
the SFP EEPROM <Condtype> CLIENT_TX_PW_LOW_WNG_1
<Probcause> transmitterFailure
(5…

EKINOPS-MIBEkiOnOff

Type Values:

1	off
2	on

.1.3.6.1.4.1.20044.17.2.2.1.48.1.2

pm254dAlmClientTxPwrHighWngPortn

Client SFP Tx Power High Warning
:Warning indicating that the SFP
output power of port is higher
than the threshold value written
in the SFP EEPROM <Condtype> CLIENT_TX_PWR_HIGH_WNG_1
<Probcause> transmitterFailure…

EKINOPS-MIBEkiOnOff

Type Values:

1	off
2	on

.1.3.6.1.4.1.20044.17.2.2.1.48.1.3

pm254dAlmClientTxBiasLowWngPortn

Client SFP Bias Low Warning :Warning
indicating that the SFP laser bias
current of port is lower than the
threshold value written in the
SFP EEPROM <Condtype> CLIENT_TX_BIAS_LOW_WNG_1
<Probcause> transmitterFailure…

EKINOPS-MIBEkiOnOff

Type Values:

1	off
2	on

.1.3.6.1.4.1.20044.17.2.2.1.48.1.4

pm254dAlmClientTxBiasHighWngPortn

Client SFP Bias High Warning :Warning
indicating that the SFP laser bias
current of port is higher than
the threshold value written in
the SFP EEPROM <Condtype> CLIENT_TX_BIAS_HIGH_WNG_1
<Probcause> transmitterFail…

EKINOPS-MIBEkiOnOff

Type Values:

1	off
2	on

.1.3.6.1.4.1.20044.17.2.2.1.48.1.5

pm254dAlmClientVccLowWngPortn

Client SFP Power Supply Low Warning
:Warning indicating that the SFP
power supply of port is lower than
the threshold value written in
the SFP EEPROM <Condtype> CLIENT_VCC_LOW_WNG_1
<Probcause> powerProblem (36) <…

EKINOPS-MIBEkiOnOff

Type Values:

1	off
2	on

.1.3.6.1.4.1.20044.17.2.2.1.48.1.6

pm254dAlmClientVccHighWngPortn

Client SFP Power Supply High Warning
:Warning indicating that the SFP
power supply of port is higher
than the threshold value written
in the SFP EEPROM <Condtype> CLIENT_VCC_HIGH_WNG_1
<Probcause> powerProblem (36…

EKINOPS-MIBEkiOnOff

Type Values:

1	off
2	on

.1.3.6.1.4.1.20044.17.2.2.1.48.1.7

pm254dAlmClientTempLowWngPortn

Client SFP Temp Low Warning :Warning
indicating that the SFP temperature
of port is lower than the threshold
value written in the SFP EEPROM
<Condtype> CLIENT_TEMP_LOW_WNG_1
<Probcause> temperatureUnacceptable
(51…

EKINOPS-MIBEkiOnOff

Type Values:

1	off
2	on

.1.3.6.1.4.1.20044.17.2.2.1.48.1.8

pm254dAlmClientTempHighWngPortn

Client SFP Temp High Warning :Warning
indicating that the SFP temperature
of port is higher than the threshold
value written in the SFP EEPROM
<Condtype> CLIENT_TEMP_HIGH_WNG_1
<Probcause> temperatureUnacceptable
…

EKINOPS-MIBEkiOnOff

Type Values:

1	off
2	on

.1.3.6.1.4.1.20044.17.2.2.1.48.1.9

pm254dAlmClientRxPwrLowWngPortn

Client SFP Rx Power Low Warning
:Warning indicating that the SFP
input power of port is lower than
the threshold value written in
the SFP EEPROM <Condtype> CLIENT_RX_PWR_LOW_WNG_1
<Probcause> receiveFailure (41)
<…

EKINOPS-MIBEkiOnOff

Type Values:

1	off
2	on

.1.3.6.1.4.1.20044.17.2.2.1.48.1.16

pm254dAlmClientRxPwrHighWngPortn

Client SFP Rx Power High Warning
:Warning indicating that the SFP
input power of port is higher than
the threshold value written in
the SFP EEPROM <Condtype> CLIENT_RX_PWR_HIGH_WNG_1
<Probcause> receiveFailure (41)…

EKINOPS-MIBEkiOnOff

Type Values:

1	off
2	on

.1.3.6.1.4.1.20044.17.2.2.1.48.1.17

pm254dAlmclientSfpAlmDdmTable

table

.1.3.6.1.4.1.20044.17.2.2.2.32 · 1 row entry · 11 columns

Open in standard view

Uses the ekinops variant from /opt/observium/mibs/ekinops.

Command help

Walk pm254dAlmclientSfpAlmDdmTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm254d-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm254d-MIB::pm254dAlmclientSfpAlmDdmTable'

List of pm254dAlmclientSfpAlmDdm 
Article

pm254dAlmclientSfpAlmDdmEntry row .1.3.6.1.4.1.20044.17.2.2.2.32.1

Row definition for the pm254dAlmclientSfpAlmDdm
table

Indexes

pm254dAlmclientSfpAlmDdmIndex

Column Syntax OID

pm254dAlmclientSfpAlmDdmIndex

Index definition for the pm254dAlmclientSfpAlmDdm
table

Integer32

Constraints:
range: 0-128

.1.3.6.1.4.1.20044.17.2.2.2.32.1.1

pm254dAlmClientTxPwrLowAlaPortn

Client SFP Tx Power Low :Alarm
indicating that the SFP output
power of port is lower than the
threshold value written in the
SFP EEPROM <Condtype> CLIENT_TX_PWR_LOW_ALA_1
<Probcause> transmitterFailure
(56) <Alarm…

EKINOPS-MIBEkiOnOff

Type Values:

1	off
2	on

.1.3.6.1.4.1.20044.17.2.2.2.32.1.2

pm254dAlmClientTxPwrHighAlaPortn

Client SFP Tx Power High :Alarm
indicating that the SFP output
power of port is higher than the
threshold value written in the
SFP EEPROM <Condtype> CLIENT_TX_PWR_HIGH_ALA_1
<Probcause> transmitterFailure
(56) <Al…

EKINOPS-MIBEkiOnOff

Type Values:

1	off
2	on

.1.3.6.1.4.1.20044.17.2.2.2.32.1.3

pm254dAlmClientTxBiasLowAlaPortn

Client SFP Bias Low :Alarm indicating
that the SFP laser bias current
of port is lower than the threshold
value written in the SFP EEPROM
<Condtype> CLIENT_TX_BIAS_LOW_ALA_1
<Probcause> transmitterFailure
(56) <Al…

EKINOPS-MIBEkiOnOff

Type Values:

1	off
2	on

.1.3.6.1.4.1.20044.17.2.2.2.32.1.4

pm254dAlmClientTxBiasHighAlaPortn

Client SFP Bias High :Alarm indicating
that the SFP laser bias current
of port is higher than the threshold
value written in the SFP EEPROM
<Condtype> CLIENT_TX_BIAS_HIGH_ALA_1
<Probcause> transmitterFailure
(56) …

EKINOPS-MIBEkiOnOff

Type Values:

1	off
2	on

.1.3.6.1.4.1.20044.17.2.2.2.32.1.5

pm254dAlmClientVccLowAlaPortn

Client SFP Power Supply Low :Alarm
indicating that the SFP power supply
of port is lower than the threshold
value written in the SFP EEPROM
<Condtype> CLIENT_VCC_LOW_ALA_1
<Probcause> powerProblem (36) <Alarmtype>…

EKINOPS-MIBEkiOnOff

Type Values:

1	off
2	on

.1.3.6.1.4.1.20044.17.2.2.2.32.1.6

pm254dAlmClientVccHighAlaPortn

Client SFP Power Supply High :Alarm
indicating that the SFP power supply
of port is higher than the threshold
value written in the SFP EEPROM
<Condtype> CLIENT_VCC_HIGH_ALA_1
<Probcause> powerProblem (36) <Alarmty…

EKINOPS-MIBEkiOnOff

Type Values:

1	off
2	on

.1.3.6.1.4.1.20044.17.2.2.2.32.1.7

pm254dAlmClientTempLowAlaPortn

Client SFP Temp Low :Alarm indicating
that the SFP temperature of port
is lower than the threshold value
written in the SFP EEPROM <Condtype>
CLIENT_TEMP_LOW_ALA_1 <Probcause>
temperatureUnacceptable (51) <Alarmtyp…

EKINOPS-MIBEkiOnOff

Type Values:

1	off
2	on

.1.3.6.1.4.1.20044.17.2.2.2.32.1.8

pm254dAlmClientTempHighAlaPortn

Client SFP Temp High :Alarm indicating
that the SFP temperature of port
is higher than the threshold value
written in the SFP EEPROM <Condtype>
CLIENT_TEMP_HIGH_ALA_1 <Probcause>
temperatureUnacceptable (51) <Alarm…

EKINOPS-MIBEkiOnOff

Type Values:

1	off
2	on

.1.3.6.1.4.1.20044.17.2.2.2.32.1.9

pm254dAlmClientRxPwrLowAlaPortn

Client SFP Rx Power Low :Alarm
indicating that the SFP input power
of port is lower than the threshold
value written in the SFP EEPROM
<Condtype> CLIENT_RX_PWR_LOW_ALA_1
<Probcause> receiveFailure (41)
<Alarmtype>…

EKINOPS-MIBEkiOnOff

Type Values:

1	off
2	on

.1.3.6.1.4.1.20044.17.2.2.2.32.1.16

pm254dAlmClientRxPwrHighAlaPortn

Client SFP Rx Power High :Alarm
indicating that the SFP input power
of port is higher than the threshold
value written in the SFP EEPROM
<Condtype> CLIENT_RX_PWR_HIGH_ALA_1
<Probcause> receiveFailure (41)
<Alarmty…

EKINOPS-MIBEkiOnOff

Type Values:

1	off
2	on

.1.3.6.1.4.1.20044.17.2.2.2.32.1.17

pm254dAlmsynthAlmClientTable

table

.1.3.6.1.4.1.20044.17.2.2.3.8 · 1 row entry · 12 columns

Open in standard view

Uses the ekinops variant from /opt/observium/mibs/ekinops.

Command help

Walk pm254dAlmsynthAlmClientTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm254d-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm254d-MIB::pm254dAlmsynthAlmClientTable'

List of pm254dAlmsynthAlmClient 
Article

pm254dAlmsynthAlmClientEntry row .1.3.6.1.4.1.20044.17.2.2.3.8.1

Row definition for the pm254dAlmsynthAlmClient
table

Indexes

pm254dAlmsynthAlmClientIndex

Column Syntax OID

pm254dAlmsynthAlmClientIndex

Index definition for the pm254dAlmsynthAlmClient
table

Integer32

Constraints:
range: 0-128

.1.3.6.1.4.1.20044.17.2.2.3.8.1.1

pm254dAlmClientSfpAbsentPortn

Client SFP Absent :This OID indicates
that the SFP module is not present
in the client port. <Help> This
alarm indicates if the client transceiver
is present. <Condtype> CLIENT_SFP_ABSENT_1
<Probcause> inputOutpu…

EKINOPS-MIBEkiOnOff

Type Values:

1	off
2	on

.1.3.6.1.4.1.20044.17.2.2.3.8.1.2

pm254dAlmClientDdmAbsentPortn

DDM Supported On Client SFP :This
OID indicates that the Client SFP
module does not support the Digital
Diagnostic Monitoring function
<Help> This status indicates
if the client transceiver includes
the DDM feat…

EKINOPS-MIBEkiOnOff

Type Values:

1	off
2	on

.1.3.6.1.4.1.20044.17.2.2.3.8.1.3

pm254dAlmClientHwFailAccPortn

Client HW Fail :This OID indicates
a failure on client port, most
probably caused by a HW issue.
<Condtype> CLIENT_HW_FAIL_ACC_1
<Probcause> equipmentMalfunction
(16) <Alarmtype> synthesisAlarm
(12) <Polarity> (2)

EKINOPS-MIBEkiOnOff

Type Values:

1	off
2	on

.1.3.6.1.4.1.20044.17.2.2.3.8.1.5

pm254dAlmClientLsdPortn

Client SFP Laser Shutdown :This
OID indicates the Client SFP transmitter
output has shut down. <Help>
This status indicates if the
client transceiver laser is ON
or OFF <Condtype> CLIENT_LSD_1
<Probcause> other…

EKINOPS-MIBEkiOnOff

Type Values:

1	off
2	on

.1.3.6.1.4.1.20044.17.2.2.3.8.1.6

pm254dAlmClientLocalOosPortn

Local Client Port In Service :This
OID indicates that the local Client
port is In Service (1) or Out of
Service (2) <Help> This status
indicates if the local client port
is in service <Condtype> CLIENT_LOCAL_OOS_…

EKINOPS-MIBEkiOnOff

Type Values:

1	off
2	on

.1.3.6.1.4.1.20044.17.2.2.3.8.1.7

pm254dAlmClientRemoteOosPortn

Remote Client Port In Service
:This OID indicates that the remote
Client port is In Service (1) or
Out of Service (2) <Help> This
status indicates if the remote
client port is in service <Condtype>
CLIENT_REMOTE…

EKINOPS-MIBEkiOnOff

Type Values:

1	off
2	on

.1.3.6.1.4.1.20044.17.2.2.3.8.1.8

pm254dAlmClientDwCaisPortn

Client AIS Inserted :This OID
indicates a CAIS has been inserted
on the output client port. <Help>
This status indicates if a Client
Alarm Indication Signal is currently
inserted on the client interface
<Condtyp…

EKINOPS-MIBEkiOnOff

Type Values:

1	off
2	on

.1.3.6.1.4.1.20044.17.2.2.3.8.1.9

pm254dAlmClientSfpDdmWarningPortn

Warning On Client SFP DDM :This
OID indicates a warning is being
received from the Client SFP DDM
<Help> This alarm indicates if
a DDM Warning has been detected
on the client transceiver <Condtype>
CLIENT_SFP_DD…

EKINOPS-MIBEkiOnOff

Type Values:

1	off
2	on

.1.3.6.1.4.1.20044.17.2.2.3.8.1.10

pm254dAlmClientSfpDdmAlmPortn

Alarm On Client SFP DDM :This
OID indicates an alarm is being
received from the Client SFP DDM
<Help> This alarm indicates if
a DDM Alarm has been detected on
the client transceiver <Condtype>
CLIENT_SFP_DDM_ALM…

EKINOPS-MIBEkiOnOff

Type Values:

1	off
2	on

.1.3.6.1.4.1.20044.17.2.2.3.8.1.11

pm254dAlmClientFailAccPortn

Client Access Fail :This OID indicates
a failure on the Client port <Condtype>
CLIENT_FAIL_ACC_1 <Probcause> equipmentMalfunction
(16) <Alarmtype> synthesisAlarm
(12) <Polarity> (2)

EKINOPS-MIBEkiOnOff

Type Values:

1	off
2	on

.1.3.6.1.4.1.20044.17.2.2.3.8.1.13

pm254dAlmClientUpCsfPortn

Client Signal Fail Inserted :This
OID indicates a CSF has been inserted
in the upstream client port. <Help>
This status indicates if a Client
Signal Fail is currently inserted
on the line signal for this client
…

EKINOPS-MIBEkiOnOff

Type Values:

1	off
2	on

.1.3.6.1.4.1.20044.17.2.2.3.8.1.17

pm254dAlmaccessioAlmTable

table

.1.3.6.1.4.1.20044.17.2.2.3.16 · 1 row entry · 3 columns

Open in standard view

Uses the ekinops variant from /opt/observium/mibs/ekinops.

Command help

Walk pm254dAlmaccessioAlmTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm254d-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm254d-MIB::pm254dAlmaccessioAlmTable'

List of pm254dAlmaccessioAlm Article

pm254dAlmaccessioAlmEntry row .1.3.6.1.4.1.20044.17.2.2.3.16.1

Row definition for the pm254dAlmaccessioAlm
table

Indexes

pm254dAlmaccessioAlmIndex

Column Syntax OID

pm254dAlmaccessioAlmIndex

Index definition for the pm254dAlmaccessioAlm
table

Integer32

Constraints:
range: 0-128

.1.3.6.1.4.1.20044.17.2.2.3.16.1.1

pm254dAlmClientDwLasFailPortn

Client SFP Tx Failed :This OID
indicates that the transmitter
fails for the SFP plugged into
the client port (this alarm reports
the transmitter failure alarm generated
by the SFPs) <Help> This alarm
indicates i…

EKINOPS-MIBEkiOnOff

Type Values:

1	off
2	on

.1.3.6.1.4.1.20044.17.2.2.3.16.1.2

pm254dAlmClientUpLosPortn

Client Input Loss Of Signal :This
OID indicates that no signal is
present on the SFP of the client
port <Help> This alarm indicates
if an optical signal is detected
on the client transceiver input
<Condtype> CLI…

EKINOPS-MIBEkiOnOff

Type Values:

1	off
2	on

.1.3.6.1.4.1.20044.17.2.2.3.16.1.5

pm254dAlmclientMapperDeAlmTable

table

.1.3.6.1.4.1.20044.17.2.2.3.72 · 1 row entry · 6 columns

Open in standard view

Uses the ekinops variant from /opt/observium/mibs/ekinops.

Command help

Walk pm254dAlmclientMapperDeAlmTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm254d-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm254d-MIB::pm254dAlmclientMapperDeAlmTable'

List of pm254dAlmclientMapperDeAlm 
Article

pm254dAlmclientMapperDeAlmEntry row .1.3.6.1.4.1.20044.17.2.2.3.72.1

Row definition for the pm254dAlmclientMapperDeAlm
table

Indexes

pm254dAlmclientMapperDeAlmIndex

Column Syntax OID

pm254dAlmclientMapperDeAlmIndex

Index definition for the pm254dAlmclientMapperDeAlm
table

Integer32

Constraints:
range: 0-128

.1.3.6.1.4.1.20044.17.2.2.3.72.1.1

pm254dAlmClientUpAccOosPortn

Client Loss Of 10b/8b Synchro
:This OID indicates the upstream
client input port has lost synchronization
on its 10B/8B decoder <Help>
This alarms indicates if the input
client signal is correctly synchronized
w…

EKINOPS-MIBEkiOnOff

Type Values:

1	off
2	on

.1.3.6.1.4.1.20044.17.2.2.3.72.1.2

pm254dAlmClientUpBufferOvlPortn

Client Upstream Buffer Overload
:This OID indicates that the rate
adaptation buffer for client port
is in overload. <Help> This alarm
indicates if there is a upstream
FIFO overload for this client port
<Condtype…

EKINOPS-MIBEkiOnOff

Type Values:

1	off
2	on

.1.3.6.1.4.1.20044.17.2.2.3.72.1.11

pm254dAlmClientDwCsfDetPortn

Client Signal Fail Detected :This
OID indicates that a CSF has been
detected on client port in the
downstream direction <Help>
This alarm indicates if a Client
Signal Fail has been detected in
the incoming line…

EKINOPS-MIBEkiOnOff

Type Values:

1	off
2	on

.1.3.6.1.4.1.20044.17.2.2.3.72.1.12

pm254dAlmClientDwBufferOvlPortn

Client Downstream Buffer Overload
:This OID indicates that the de-mapper
buffer for client port is in overload.
<Help> This alarm indicates if
there is a downstream FIFO overload
for this client port <Condtype>
…

EKINOPS-MIBEkiOnOff

Type Values:

1	off
2	on

.1.3.6.1.4.1.20044.17.2.2.3.72.1.15

pm254dAlmClientLoopAccFifoFailPortndeprecated

Client Port Loop FIFO Failure
:active only in client loopback
mode. <Condtype> CLIENT_LOOP_ACC_FIFO_FAIL_1
<Probcause> equipmentMalfunction
(16) <Alarmtype> equipmentAlarm
(5) <Polarity> (2)

EKINOPS-MIBEkiOnOff

Type Values:

1	off
2	on

.1.3.6.1.4.1.20044.17.2.2.3.72.1.16

pm254dAlmlineDownS1Table

table

.1.3.6.1.4.1.20044.17.2.3.1.130 · 1 row entry · 2 columns

Open in standard view

Uses the ekinops variant from /opt/observium/mibs/ekinops.

Command help

Walk pm254dAlmlineDownS1Table

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm254d-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm254d-MIB::pm254dAlmlineDownS1Table'

List of pm254dAlmlineDownS1 Article

pm254dAlmlineDownS1Entry row .1.3.6.1.4.1.20044.17.2.3.1.130.1

Row definition for the pm254dAlmlineDownS1
table

Indexes

pm254dAlmlineDownS1Index

Column	Syntax	OID
pm254dAlmlineDownS1Index Index definition for the pm254dAlmlineDownS1 table	Integer32 Constraints: `range: 0-128`	`.1.3.6.1.4.1.20044.17.2.3.1.130.1.1`
pm254dAlmlineDownS1Portn Line 1 S1 Extracted Value :This gives the value of S1 extracted from the overhead of the received OC-48c/STM-16c signal on the line 1 <Condtype> LINE_DW_S1_8_1 <Probcause> other (1) <Alarmtype> other (1) <Polarity…	Integer32 Constraints: `range: 0-255`	`.1.3.6.1.4.1.20044.17.2.3.1.130.1.2`

pm254dAlmlineDownK1Table

table

.1.3.6.1.4.1.20044.17.2.3.1.131 · 1 row entry · 2 columns

Open in standard view

Uses the ekinops variant from /opt/observium/mibs/ekinops.

Command help

Walk pm254dAlmlineDownK1Table

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm254d-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm254d-MIB::pm254dAlmlineDownK1Table'

List of pm254dAlmlineDownK1 Article

pm254dAlmlineDownK1Entry row .1.3.6.1.4.1.20044.17.2.3.1.131.1

Row definition for the pm254dAlmlineDownK1
table

Indexes

pm254dAlmlineDownK1Index

Column	Syntax	OID
pm254dAlmlineDownK1Index Index definition for the pm254dAlmlineDownK1 table	Integer32 Constraints: `range: 0-128`	`.1.3.6.1.4.1.20044.17.2.3.1.131.1.1`
pm254dAlmlineDownK1Portn Line 1 K1 Extracted Value :This gives the value of K1 extracted from the overhead of the received OC-48c/STM-16c signal on the line 1 <Condtype> LINE_DW_K1_8_1 <Probcause> other (1) <Alarmtype> other (1) <Polarity…	Integer32 Constraints: `range: 0-255`	`.1.3.6.1.4.1.20044.17.2.3.1.131.1.2`

pm254dAlmlineDownK2Table

table

.1.3.6.1.4.1.20044.17.2.3.1.132 · 1 row entry · 2 columns

Open in standard view

Uses the ekinops variant from /opt/observium/mibs/ekinops.

Command help

Walk pm254dAlmlineDownK2Table

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm254d-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm254d-MIB::pm254dAlmlineDownK2Table'

List of pm254dAlmlineDownK2 Article

pm254dAlmlineDownK2Entry row .1.3.6.1.4.1.20044.17.2.3.1.132.1

Row definition for the pm254dAlmlineDownK2
table

Indexes

pm254dAlmlineDownK2Index

Column	Syntax	OID
pm254dAlmlineDownK2Index Index definition for the pm254dAlmlineDownK2 table	Integer32 Constraints: `range: 0-128`	`.1.3.6.1.4.1.20044.17.2.3.1.132.1.1`
pm254dAlmlineDownK2Portn Line 1 K2 Extracted Value :This gives the value of K2 extracted from the overhead of the received OC-48c/STM-16c signal on the line 1 <Condtype> LINE_DW_K2_8_1 <Probcause> other (1) <Alarmtype> other (1) <Polarity…	Integer32 Constraints: `range: 0-255`	`.1.3.6.1.4.1.20044.17.2.3.1.132.1.2`

pm254dAlmlineSfpWarnDdmTable

table

.1.3.6.1.4.1.20044.17.2.3.1.164 · 1 row entry · 11 columns

Open in standard view

Uses the ekinops variant from /opt/observium/mibs/ekinops.

Command help

Walk pm254dAlmlineSfpWarnDdmTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm254d-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm254d-MIB::pm254dAlmlineSfpWarnDdmTable'

List of pm254dAlmlineSfpWarnDdm 
Article

pm254dAlmlineSfpWarnDdmEntry row .1.3.6.1.4.1.20044.17.2.3.1.164.1

Row definition for the pm254dAlmlineSfpWarnDdm
table

Indexes

pm254dAlmlineSfpWarnDdmIndex

Column Syntax OID

pm254dAlmlineSfpWarnDdmIndex

Index definition for the pm254dAlmlineSfpWarnDdm
table

Integer32

Constraints:
range: 0-128

.1.3.6.1.4.1.20044.17.2.3.1.164.1.1

pm254dAlmLineTxPwLowWngPortn

Line SFP Tx Power Low Warning
:Warning indicating that the SFP
output power of Line is lower than
the threshold value written in
the SFP EEPROM <Condtype> LINE_TX_PW_LOW_WNG_1
<Probcause> transmitterFailure
(56) <…

EKINOPS-MIBEkiOnOff

Type Values:

1	off
2	on

.1.3.6.1.4.1.20044.17.2.3.1.164.1.2

pm254dAlmLineTxPwrHighWngPortn

Line SFP Tx Power High Warning
:Warning indicating that the SFP
output power of Line is higher
than the threshold value written
in the SFP EEPROM <Condtype> LINE_TX_PWR_HIGH_WNG_1
<Probcause> transmitterFailure
(5…

EKINOPS-MIBEkiOnOff

Type Values:

1	off
2	on

.1.3.6.1.4.1.20044.17.2.3.1.164.1.3

pm254dAlmLineTxBiasLowWngPortn

Line SFP Bias Low Warning :Warning
indicating that the SFP laser bias
current of Line is lower than the
threshold value written in the
SFP EEPROM <Condtype> LINE_TX_BIAS_LOW_WNG_1
<Probcause> transmitterFailure
(5…

EKINOPS-MIBEkiOnOff

Type Values:

1	off
2	on

.1.3.6.1.4.1.20044.17.2.3.1.164.1.4

pm254dAlmLineTxBiasHighWngPortn

Line SFP Bias High Warning :Warning
indicating that the SFP laser bias
current of Line is higher than
the threshold value written in
the SFP EEPROM <Condtype> LINE_TX_BIAS_HIGH_WNG_1
<Probcause> transmitterFailure
…

EKINOPS-MIBEkiOnOff

Type Values:

1	off
2	on

.1.3.6.1.4.1.20044.17.2.3.1.164.1.5

pm254dAlmLineVccLowWngPortn

Line SFP Power Supply Low Warning
:Warning indicating that the SFP
power supply of Line is lower than
the threshold value written in
the SFP EEPROM <Condtype> LINE_VCC_LOW_WNG_1
<Probcause> powerProblem (36) <Alar…

EKINOPS-MIBEkiOnOff

Type Values:

1	off
2	on

.1.3.6.1.4.1.20044.17.2.3.1.164.1.6

pm254dAlmLineVccHighWngPortn

Line SFP Power Supply High Warning
:Warning indicating that the SFP
power supply of Line is higher
than the threshold value written
in the SFP EEPROM <Condtype> LINE_VCC_HIGH_WNG_1
<Probcause> powerProblem (36) <A…

EKINOPS-MIBEkiOnOff

Type Values:

1	off
2	on

.1.3.6.1.4.1.20044.17.2.3.1.164.1.7

pm254dAlmLineTempLowWngPortn

Line SFP Temp Low Warning :Warning
indicating that the SFP temperature
of Line is lower than the threshold
value written in the SFP EEPROM
<Condtype> LINE_TEMP_LOW_WNG_1
<Probcause> temperatureUnacceptable
(51) <A…

EKINOPS-MIBEkiOnOff

Type Values:

1	off
2	on

.1.3.6.1.4.1.20044.17.2.3.1.164.1.8

pm254dAlmLineTempHighWngPortn

Line SFP Temp High Warning :Warning
indicating that the SFP temperature
of Line is higher than the threshold
value written in the SFP EEPROM
<Condtype> LINE_TEMP_HIGH_WNG_1
<Probcause> temperatureUnacceptable
(51)…

EKINOPS-MIBEkiOnOff

Type Values:

1	off
2	on

.1.3.6.1.4.1.20044.17.2.3.1.164.1.9

pm254dAlmLineRxPwrLowWngPortn

Line SFP Rx Power Low Warning
:Warning indicating that the SFP
input power of Line is lower than
the threshold value written in
the SFP EEPROM <Condtype> LINE_RX_PWR_LOW_WNG_1
<Probcause> receiveFailure (41)
<Alar…

EKINOPS-MIBEkiOnOff

Type Values:

1	off
2	on

.1.3.6.1.4.1.20044.17.2.3.1.164.1.16

pm254dAlmLineRxPwrHighWngPortn

Line SFP Rx Power High Warning
:Warning indicating that the SFP
input power of Line is higher than
the threshold value written in
the SFP EEPROM <Condtype> LINE_RX_PWR_HIGH_WNG_1
<Probcause> receiveFailure (41)
<A…

EKINOPS-MIBEkiOnOff

Type Values:

1	off
2	on

.1.3.6.1.4.1.20044.17.2.3.1.164.1.17

pm254dAlmlineSfpAlaDdmTable

table

.1.3.6.1.4.1.20044.17.2.3.2.162 · 1 row entry · 11 columns

Open in standard view

Uses the ekinops variant from /opt/observium/mibs/ekinops.

Command help

Walk pm254dAlmlineSfpAlaDdmTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm254d-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm254d-MIB::pm254dAlmlineSfpAlaDdmTable'

List of pm254dAlmlineSfpAlaDdm 
Article

pm254dAlmlineSfpAlaDdmEntry row .1.3.6.1.4.1.20044.17.2.3.2.162.1

Row definition for the pm254dAlmlineSfpAlaDdm
table

Indexes

pm254dAlmlineSfpAlaDdmIndex

Column Syntax OID

pm254dAlmlineSfpAlaDdmIndex

Index definition for the pm254dAlmlineSfpAlaDdm
table

Integer32

Constraints:
range: 0-128

.1.3.6.1.4.1.20044.17.2.3.2.162.1.1

pm254dAlmLineTxPwrLowAlaPortn

Line SFP Tx Power Low :Alarm indicating
that the SFP output power of Line
is lower than the threshold value
written in the SFP EEPROM <Condtype>
LINE_TX_PWR_LOW_ALA_1 <Probcause>
transmitterFailure (56) <Alarmtype>…

EKINOPS-MIBEkiOnOff

Type Values:

1	off
2	on

.1.3.6.1.4.1.20044.17.2.3.2.162.1.2

pm254dAlmLineTxPwrHighAlaPortn

Line SFP Tx Power High :Alarm
indicating that the SFP output
power of Line is higher than the
threshold value written in the
SFP EEPROM <Condtype> LINE_TX_PWR_HIGH_ALA_1
<Probcause> transmitterFailure
(56) <Alarmt…

EKINOPS-MIBEkiOnOff

Type Values:

1	off
2	on

.1.3.6.1.4.1.20044.17.2.3.2.162.1.3

pm254dAlmLineTxBiasLowAlaPortn

Line SFP Bias Low :Alarm indicating
that the SFP laser bias current
of Line is lower than the threshold
value written in the SFP EEPROM
<Condtype> LINE_TX_BIAS_LOW_ALA_1
<Probcause> transmitterFailure
(56) <Alarmt…

EKINOPS-MIBEkiOnOff

Type Values:

1	off
2	on

.1.3.6.1.4.1.20044.17.2.3.2.162.1.4

pm254dAlmLineTxBiasHighAlaPortn

Line SFP Bias High :Alarm indicating
that the SFP laser bias current
of Line is higher than the threshold
value written in the SFP EEPROM
<Condtype> LINE_TX_BIAS_HIGH_ALA_1
<Probcause> transmitterFailure
(56) <Ala…

EKINOPS-MIBEkiOnOff

Type Values:

1	off
2	on

.1.3.6.1.4.1.20044.17.2.3.2.162.1.5

pm254dAlmLineVccLowAlaPortn

Line SFP Power Supply Low :Alarm
indicating that the SFP power supply
of Line is lower than the threshold
value written in the SFP EEPROM
<Condtype> LINE_VCC_LOW_ALA_1
<Probcause> powerProblem (36)
<Alarmtype> eq…

EKINOPS-MIBEkiOnOff

Type Values:

1	off
2	on

.1.3.6.1.4.1.20044.17.2.3.2.162.1.6

pm254dAlmLineVccHighAlaPortn

Line SFP Power Supply High :Alarm
indicating that the SFP power supply
of Line is higher than the threshold
value written in the SFP EEPROM
<Condtype> LINE_VCC_HIGH_ALA_1
<Probcause> powerProblem (36) <Alarmtype> …

EKINOPS-MIBEkiOnOff

Type Values:

1	off
2	on

.1.3.6.1.4.1.20044.17.2.3.2.162.1.7

pm254dAlmLineTempLowAlaPortn

Line SFP Temp Low :Alarm indicating
that the SFP temperature of Line
is lower than the threshold value
written in the SFP EEPROM <Condtype>
LINE_TEMP_LOW_ALA_1 <Probcause>
temperatureUnacceptable (51) <Alarmtype>
…

EKINOPS-MIBEkiOnOff

Type Values:

1	off
2	on

.1.3.6.1.4.1.20044.17.2.3.2.162.1.8

pm254dAlmLineTempHighAlaPortn

Line SFP Temp High :Alarm indicating
that the SFP temperature of Line
is higher than the threshold value
written in the SFP EEPROM <Condtype>
LINE_TEMP_HIGH_ALA_1 <Probcause>
temperatureUnacceptable (51) <Alarmtype…

EKINOPS-MIBEkiOnOff

Type Values:

1	off
2	on

.1.3.6.1.4.1.20044.17.2.3.2.162.1.9

pm254dAlmLineRxPwrLowAlaPortn

Line SFP Rx Power Low :Alarm indicating
that the SFP input power of Line
is lower than the threshold value
written in the SFP EEPROM <Condtype>
LINE_RX_PWR_LOW_ALA_1 <Probcause>
receiveFailure (41) <Alarmtype>
equ…

EKINOPS-MIBEkiOnOff

Type Values:

1	off
2	on

.1.3.6.1.4.1.20044.17.2.3.2.162.1.16

pm254dAlmLineRxPwrHighAlaPortn

Line SFP Rx Power High :Alarm
indicating that the SFP input
power of Line is higher than the
threshold value written in the
SFP EEPROM <Condtype> LINE_RX_PWR_HIGH_ALA_1
<Probcause> receiveFailure (41)
<Alarmtype> …

EKINOPS-MIBEkiOnOff

Type Values:

1	off
2	on

.1.3.6.1.4.1.20044.17.2.3.2.162.1.17

pm254dAlmsynthAlmLineTable

table

.1.3.6.1.4.1.20044.17.2.3.3.5 · 1 row entry · 11 columns

Open in standard view

Uses the ekinops variant from /opt/observium/mibs/ekinops.

Command help

Walk pm254dAlmsynthAlmLineTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm254d-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm254d-MIB::pm254dAlmsynthAlmLineTable'

List of pm254dAlmsynthAlmLine
Article

pm254dAlmsynthAlmLineEntry row .1.3.6.1.4.1.20044.17.2.3.3.5.1

Row definition for the pm254dAlmsynthAlmLine
table

Indexes

pm254dAlmsynthAlmLineIndex

Column Syntax OID

pm254dAlmsynthAlmLineIndex

Index definition for the pm254dAlmsynthAlmLine
table

Integer32

Constraints:
range: 0-128

.1.3.6.1.4.1.20044.17.2.3.3.5.1.1

pm254dAlmLineSfpAbsentPortn

Line SFP Absent :This OID indicates
that the SFP module is not present
in the line port. <Help> This
alarm indicates if the line transceiver
is present. <Condtype> LINE_SFP_ABSENT_1
<Probcause> inputOutputDeviceE…

EKINOPS-MIBEkiOnOff

Type Values:

1	off
2	on

.1.3.6.1.4.1.20044.17.2.3.3.5.1.2

pm254dAlmLineDdmAbsentPortn

DDM Supported On Line SFP :This
OID indicates that the SFP module
on line port does not support Digital
Diagnostic Monitoring Functions
<Help> This status indicates
if the client transceiver includes
the DDM fea…

EKINOPS-MIBEkiOnOff

Type Values:

1	off
2	on

.1.3.6.1.4.1.20044.17.2.3.3.5.1.3

pm254dAlmLineHwFailPortn

Line HW Fail :This OID indicates
a failure condition on the Line
port, the most probable cause being
a HW issue <Condtype> LINE_HW_FAIL_1
<Probcause> equipmentMalfunction
(16) <Alarmtype> synthesisAlarm
(12) <Pol…

EKINOPS-MIBEkiOnOff

Type Values:

1	off
2	on

.1.3.6.1.4.1.20044.17.2.3.3.5.1.5

pm254dAlmLineLsdPortn

Line SFP Laser Shutdown :This
OID indicates the SFP transmitter
line output is shut down. <Help>
This status indicates if the line
transceiver laser is ON or OFF
<Condtype> LINE_LSD_1 <Probcause>
other (1) <Alar…

EKINOPS-MIBEkiOnOff

Type Values:

1	off
2	on

.1.3.6.1.4.1.20044.17.2.3.3.5.1.6

pm254dAlmLineLocalOosPortn

Line Port In Service :This OID
indicates that the Line port is
In Service (1) of Out or Service
(2) <Help> This status indicates
if the line port is in service
<Condtype> LINE_LOCAL_OOS_1 <Probcause>
information…

EKINOPS-MIBEkiOnOff

Type Values:

1	off
2	on

.1.3.6.1.4.1.20044.17.2.3.3.5.1.7

pm254dAlmLineUpRdiInsPortn

MS-RDI/L-RDI Inserted On Line
:This OID indicates an upstream
MS-RDI/L-RDI has been inserted
on the outgoing 2.5 Gb/s SDH/SONET
signal. <Help> This status indicates
if a MS-RDI/L-RDI is currently
inserted on the…

EKINOPS-MIBEkiOnOff

Type Values:

1	off
2	on

.1.3.6.1.4.1.20044.17.2.3.3.5.1.9

pm254dAlmLineDdmWarningPortn

Warning On Line SFP DDM :This
OID indicates a warning is present
coming out of Line optical interface
DDM <Help> This alarm indicates
if a DDM Warning has been detected
on the client transceiver <Condtype>
LINE_…

EKINOPS-MIBEkiOnOff

Type Values:

1	off
2	on

.1.3.6.1.4.1.20044.17.2.3.3.5.1.10

pm254dAlmLineDdmAlmPortn

Alarm On Line SFP DDM :This OID
indicates an alarm is present coming
out of Line optical interface DDM
<Help> This alarm indicates if
a DDM Alarm has been detected on
the client transceiver <Condtype>
LINE_DDM_A…

EKINOPS-MIBEkiOnOff

Type Values:

1	off
2	on

.1.3.6.1.4.1.20044.17.2.3.3.5.1.11

pm254dAlmLineFailPortn

Line Fail :This OID indicates
a failure condition on the Line.
<Condtype> LINE_FAIL_1 <Probcause>
equipmentMalfunction (16) <Alarmtype>
synthesisAlarm (12) <Polarity>
(2)

EKINOPS-MIBEkiOnOff

Type Values:

1	off
2	on

.1.3.6.1.4.1.20044.17.2.3.3.5.1.13

pm254dAlmDccActivePortn

DCC Active :This OID indicates
the DCC is active on receive side
<Help> This status indicates
whether the DCC is active or standby
on this line <Condtype> DCC_ACTIVE_1
<Probcause> other (1) <Alarmtype>
other (1)…

EKINOPS-MIBEkiOnOff

Type Values:

1	off
2	on

.1.3.6.1.4.1.20044.17.2.3.3.5.1.17

pm254dAlmlineDfrmAlmTable

table

.1.3.6.1.4.1.20044.17.2.3.3.128 · 1 row entry · 7 columns

Open in standard view

Uses the ekinops variant from /opt/observium/mibs/ekinops.

Command help

Walk pm254dAlmlineDfrmAlmTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm254d-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm254d-MIB::pm254dAlmlineDfrmAlmTable'

List of pm254dAlmlineDfrmAlm Article

pm254dAlmlineDfrmAlmEntry row .1.3.6.1.4.1.20044.17.2.3.3.128.1

Row definition for the pm254dAlmlineDfrmAlm
table

Indexes

pm254dAlmlineDfrmAlmIndex

Column Syntax OID

pm254dAlmlineDfrmAlmIndex

Index definition for the pm254dAlmlineDfrmAlm
table

Integer32

Constraints:
range: 0-128

.1.3.6.1.4.1.20044.17.2.3.3.128.1.1

pm254dAlmLineDwAisDetPortn

MS-AIS/L-AIS Detected On Line
Input :This OID indicates that
an MS-AIS has been detected on
incoming OC-48c/STM-16c input
signal <Help> This alarm indicates
if there is a MS-AIS/L-AIS is detected
on the line in…

EKINOPS-MIBEkiOnOff

Type Values:

1	off
2	on

.1.3.6.1.4.1.20044.17.2.3.3.128.1.2

pm254dAlmLineDwRdiDetPortn

MS-RDI/L-RDI Detected On Line
Input :This OID indicates that
an MS-RDI has been detected on
incoming OC-48c/STM-16c input
signal <Help> This alarm indicates
if there is a MS-RDI/L-RDI is detected
on the line in…

EKINOPS-MIBEkiOnOff

Type Values:

1	off
2	on

.1.3.6.1.4.1.20044.17.2.3.3.128.1.3

pm254dAlmLineDwOofPortn

SONET/SDH Line Out Of Frame :This
OID indicates that an Out Of Frame
has been detected on incoming
OC-48c/STM-16c input signal <Help>
This alarm indicates if there
is a Out of Frame is detected
on the line inpu…

EKINOPS-MIBEkiOnOff

Type Values:

1	off
2	on

.1.3.6.1.4.1.20044.17.2.3.3.128.1.4

pm254dAlmLineDwLofPortn

SONET/SDH Line Loss Of Frame :This
OID indicates that a Loss Of Frame
has been detected on incoming
OC-48c/STM-16c input signal <Help>
This alarm indicates if there
is a Loss of Frame is detected
on the line in…

EKINOPS-MIBEkiOnOff

Type Values:

1	off
2	on

.1.3.6.1.4.1.20044.17.2.3.3.128.1.5

pm254dAlmDwLopPortn

P-LOP On STS48c :This OID indicates
that a Loss Of Pointer has been
detected on incoming STS-48c input
signal <Help> This alarm indicates
if Loss of Pointer is detected
on the STS-48c <Condtype> DW_LOP_1
<Probca…

EKINOPS-MIBEkiOnOff

Type Values:

1	off
2	on

.1.3.6.1.4.1.20044.17.2.3.3.128.1.10

pm254dAlmDwAuAisPortn

P-AIS On STS48c :This OID indicates
that an AU-AIS/AIS-P has been detected
on incoming STS-48c input signal
<Help> This alarm indicates if
a Path AIS is detected on the STS-48c
<Condtype> DW_AU_AIS_1 <Probcause>…

EKINOPS-MIBEkiOnOff

Type Values:

1	off
2	on

.1.3.6.1.4.1.20044.17.2.3.3.128.1.11

pm254dAlmlineIoAlmTable

table

.1.3.6.1.4.1.20044.17.2.3.3.160 · 1 row entry · 3 columns

Open in standard view

Uses the ekinops variant from /opt/observium/mibs/ekinops.

Command help

Walk pm254dAlmlineIoAlmTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm254d-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm254d-MIB::pm254dAlmlineIoAlmTable'

List of pm254dAlmlineIoAlm Article

pm254dAlmlineIoAlmEntry row .1.3.6.1.4.1.20044.17.2.3.3.160.1

Row definition for the pm254dAlmlineIoAlm
table

Indexes

pm254dAlmlineIoAlmIndex

Column Syntax OID

pm254dAlmlineIoAlmIndex

Index definition for the pm254dAlmlineIoAlm
table

Integer32

Constraints:
range: 0-128

.1.3.6.1.4.1.20044.17.2.3.3.160.1.1

pm254dAlmLineUpLasFailPortn

Line SFP Tx Failed :This OID indicates
that the transmitter fails for
the SFP plugged into the line
port #n (this alarm reports the
transmitter failure alarm generated
by the SFPs) <Help> This alarm
indicates if…

EKINOPS-MIBEkiOnOff

Type Values:

1	off
2	on

.1.3.6.1.4.1.20044.17.2.3.3.160.1.2

pm254dAlmLineDwLosPortn

Line Input Loss Of Signal :This
OID indicates that no signal is
present on the SFP of the line
port #n <Help> This alarm indicates
if an optical signal is detected
on the line transceiver input <Condtype>
LINE_D…

EKINOPS-MIBEkiOnOff

Type Values:

1	off
2	on

.1.3.6.1.4.1.20044.17.2.3.3.160.1.5

pm254dMesrclientTempMeasTable

table

.1.3.6.1.4.1.20044.17.3.2.16 · 1 row entry · 2 columns

Open in standard view

Uses the ekinops variant from /opt/observium/mibs/ekinops.

Command help

Walk pm254dMesrclientTempMeasTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm254d-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm254d-MIB::pm254dMesrclientTempMeasTable'

List of pm254dMesrclientTempMeas 
Article

pm254dMesrclientTempMeasEntry row .1.3.6.1.4.1.20044.17.3.2.16.1

Row definition for the pm254dMesrclientTempMeas
table

Indexes

pm254dMesrclientTempMeasIndex

Column	Syntax	OID
pm254dMesrclientTempMeasIndex Index definition for the pm254dMesrclientTempMeas table	Integer32 Constraints: `range: 0-128`	`.1.3.6.1.4.1.20044.17.3.2.16.1.1`
pm254dMesrclientTempMeasPortn Client SFP Temperature :This OID gives the temperature value of the client SFP, read from the DDM (Digital Diagnostic Monitoring) (Temperature = AV/256) (Unit = C) <Help> This measure gives the temperature of th…	Integer32 Constraints: `range: 0-65535`	`.1.3.6.1.4.1.20044.17.3.2.16.1.2`

pm254dMesrclientVoltMeasTable

table

.1.3.6.1.4.1.20044.17.3.2.24 · 1 row entry · 2 columns

Open in standard view

Uses the ekinops variant from /opt/observium/mibs/ekinops.

Command help

Walk pm254dMesrclientVoltMeasTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm254d-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm254d-MIB::pm254dMesrclientVoltMeasTable'

List of pm254dMesrclientVoltMeas 
Article

pm254dMesrclientVoltMeasEntry row .1.3.6.1.4.1.20044.17.3.2.24.1

Row definition for the pm254dMesrclientVoltMeas
table

Indexes

pm254dMesrclientVoltMeasIndex

Column	Syntax	OID
pm254dMesrclientVoltMeasIndex Index definition for the pm254dMesrclientVoltMeas table	Integer32 Constraints: `range: 0-128`	`.1.3.6.1.4.1.20044.17.3.2.24.1.1`
pm254dMesrclientVoltMeasPortn Client SFP Power Supply :This OID gives the 3V3 voltage value of the client SFP, read from the DDM (Digital Diagnostic Monitoring) (Voltage = AV/10000) (Unit = V) <Help> This measure gives the 3V3 voltage of the…	Integer32 Constraints: `range: 0-65535`	`.1.3.6.1.4.1.20044.17.3.2.24.1.2`

pm254dMesrclientBiasMeasTable

table

.1.3.6.1.4.1.20044.17.3.2.32 · 1 row entry · 2 columns

Open in standard view

Uses the ekinops variant from /opt/observium/mibs/ekinops.

Command help

Walk pm254dMesrclientBiasMeasTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm254d-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm254d-MIB::pm254dMesrclientBiasMeasTable'

List of pm254dMesrclientBiasMeas 
Article

pm254dMesrclientBiasMeasEntry row .1.3.6.1.4.1.20044.17.3.2.32.1

Row definition for the pm254dMesrclientBiasMeas
table

Indexes

pm254dMesrclientBiasMeasIndex

Column	Syntax	OID
pm254dMesrclientBiasMeasIndex Index definition for the pm254dMesrclientBiasMeas table	Integer32 Constraints: `range: 0-128`	`.1.3.6.1.4.1.20044.17.3.2.32.1.1`
pm254dMesrclientBiasMeasPortn Client SFP Laser Bias :This OID gives the bias value of the Client SFP, read from the DDM (Digital Diagnostic Monitoring) (Bias = AV/500) (Unit = mA) <Help> This measure gives the bias of the client transceiver	Integer32 Constraints: `range: 0-65535`	`.1.3.6.1.4.1.20044.17.3.2.32.1.2`

pm254dMesrclientTxpwrMeasTable

table

.1.3.6.1.4.1.20044.17.3.2.40 · 1 row entry · 2 columns

Open in standard view

Uses the ekinops variant from /opt/observium/mibs/ekinops.

Command help

Walk pm254dMesrclientTxpwrMeasTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm254d-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm254d-MIB::pm254dMesrclientTxpwrMeasTable'

List of pm254dMesrclientTxpwrMeas 
Article

pm254dMesrclientTxpwrMeasEntry row .1.3.6.1.4.1.20044.17.3.2.40.1

Row definition for the pm254dMesrclientTxpwrMeas
table

Indexes

pm254dMesrclientTxpwrMeasIndex

Column	Syntax	OID
pm254dMesrclientTxpwrMeasIndex Index definition for the pm254dMesrclientTxpwrMeas table	Integer32 Constraints: `range: 0-128`	`.1.3.6.1.4.1.20044.17.3.2.40.1.1`
pm254dMesrclientTxpwrMeasPortn Client SFP Tx Power :This OID gives the transmit power value of the Client SFP, read from the DDM (Digital Diagnostic Monitoring) (Power = 10*log(AV)-40) (Unit = dBm) <Help> This measure gives the Tx optical pow…	Integer32 Constraints: `range: 0-65535`	`.1.3.6.1.4.1.20044.17.3.2.40.1.2`

pm254dMesrclientRxpwrMeasTable

table

.1.3.6.1.4.1.20044.17.3.2.48 · 1 row entry · 2 columns

Open in standard view

Uses the ekinops variant from /opt/observium/mibs/ekinops.

Command help

Walk pm254dMesrclientRxpwrMeasTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm254d-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm254d-MIB::pm254dMesrclientRxpwrMeasTable'

List of pm254dMesrclientRxpwrMeas 
Article

pm254dMesrclientRxpwrMeasEntry row .1.3.6.1.4.1.20044.17.3.2.48.1

Row definition for the pm254dMesrclientRxpwrMeas
table

Indexes

pm254dMesrclientRxpwrMeasIndex

Column	Syntax	OID
pm254dMesrclientRxpwrMeasIndex Index definition for the pm254dMesrclientRxpwrMeas table	Integer32 Constraints: `range: 0-128`	`.1.3.6.1.4.1.20044.17.3.2.48.1.1`
pm254dMesrclientRxpwrMeasPortn Client SFP Rx Power :This OID gives the receive power value of the Client SFP, read in the DDM (Digital Diagnostic Monitoring) (Power = 10*log(AV)-40) (Unit = dBm) <Help> This measure gives the Rx optical power …	Integer32 Constraints: `range: 0-65535`	`.1.3.6.1.4.1.20044.17.3.2.48.1.2`

pm254dMesrlineTempMeasTable

table

.1.3.6.1.4.1.20044.17.3.3.160 · 1 row entry · 2 columns

Open in standard view

Uses the ekinops variant from /opt/observium/mibs/ekinops.

Command help

Walk pm254dMesrlineTempMeasTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm254d-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm254d-MIB::pm254dMesrlineTempMeasTable'

List of pm254dMesrlineTempMeas 
Article

pm254dMesrlineTempMeasEntry row .1.3.6.1.4.1.20044.17.3.3.160.1

Row definition for the pm254dMesrlineTempMeas
table

Indexes

pm254dMesrlineTempMeasIndex

Column	Syntax	OID
pm254dMesrlineTempMeasIndex Index definition for the pm254dMesrlineTempMeas table	Integer32 Constraints: `range: 0-128`	`.1.3.6.1.4.1.20044.17.3.3.160.1.1`
pm254dMesrlineTempMeasPortn Line SFP Temperature :This OID gives the temperature value of the Line SFP, read from the DDM (Digital Diagnostic Monitoring) (Temperature = AV/256) (Unit = C) <Help> This measure gives the temper…	Integer32 Constraints: `range: 0-65535`	`.1.3.6.1.4.1.20044.17.3.3.160.1.2`

pm254dMesrlineVoltMeasTable

table

.1.3.6.1.4.1.20044.17.3.3.161 · 1 row entry · 2 columns

Open in standard view

Uses the ekinops variant from /opt/observium/mibs/ekinops.

Command help

Walk pm254dMesrlineVoltMeasTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm254d-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm254d-MIB::pm254dMesrlineVoltMeasTable'

List of pm254dMesrlineVoltMeas 
Article

pm254dMesrlineVoltMeasEntry row .1.3.6.1.4.1.20044.17.3.3.161.1

Row definition for the pm254dMesrlineVoltMeas
table

Indexes

pm254dMesrlineVoltMeasIndex

Column	Syntax	OID
pm254dMesrlineVoltMeasIndex Index definition for the pm254dMesrlineVoltMeas table	Integer32 Constraints: `range: 0-128`	`.1.3.6.1.4.1.20044.17.3.3.161.1.1`
pm254dMesrlineVoltMeasPortn Line SFP Power Supply :This OID gives the 3V3 voltage value of the Line SFP, read from the DDM (Digital Diagnostic Monitoring) (Voltage = AV/10000) (Unit = V) <Help> This measure gives the 3V3 voltage of the lin…	Integer32 Constraints: `range: 0-65535`	`.1.3.6.1.4.1.20044.17.3.3.161.1.2`

pm254dMesrlineBiasMeasTable

table

.1.3.6.1.4.1.20044.17.3.3.162 · 1 row entry · 2 columns

Open in standard view

Uses the ekinops variant from /opt/observium/mibs/ekinops.

Command help

Walk pm254dMesrlineBiasMeasTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm254d-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm254d-MIB::pm254dMesrlineBiasMeasTable'

List of pm254dMesrlineBiasMeas 
Article

pm254dMesrlineBiasMeasEntry row .1.3.6.1.4.1.20044.17.3.3.162.1

Row definition for the pm254dMesrlineBiasMeas
table

Indexes

pm254dMesrlineBiasMeasIndex

Column	Syntax	OID
pm254dMesrlineBiasMeasIndex Index definition for the pm254dMesrlineBiasMeas table	Integer32 Constraints: `range: 0-128`	`.1.3.6.1.4.1.20044.17.3.3.162.1.1`
pm254dMesrlineBiasMeasPortn Line SFP Laser Bias :This OID gives the bias value of the Line SFP, read from the DDM (Digital Diagnostic Monitoring) (Bias = AV/500) (Unit = mA) <Help> This measure gives the bias of the line transceiver	Integer32 Constraints: `range: 0-65535`	`.1.3.6.1.4.1.20044.17.3.3.162.1.2`

pm254dMesrlineTxpwrMeasTable

table

.1.3.6.1.4.1.20044.17.3.3.163 · 1 row entry · 2 columns

Open in standard view

Uses the ekinops variant from /opt/observium/mibs/ekinops.

Command help

Walk pm254dMesrlineTxpwrMeasTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm254d-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm254d-MIB::pm254dMesrlineTxpwrMeasTable'

List of pm254dMesrlineTxpwrMeas 
Article

pm254dMesrlineTxpwrMeasEntry row .1.3.6.1.4.1.20044.17.3.3.163.1

Row definition for the pm254dMesrlineTxpwrMeas
table

Indexes

pm254dMesrlineTxpwrMeasIndex

Column	Syntax	OID
pm254dMesrlineTxpwrMeasIndex Index definition for the pm254dMesrlineTxpwrMeas table	Integer32 Constraints: `range: 0-128`	`.1.3.6.1.4.1.20044.17.3.3.163.1.1`
pm254dMesrlineTxpwrMeasPortn Line SFP Tx Power :This OID gives the transmit power value of the Line SFP, read from the DDM (Digital Diagnostic Monitoring) (Power = 10*log(AV)-40) (Unit = dBm) <Help> This measure gives the Tx optical power o…	Integer32 Constraints: `range: 0-65535`	`.1.3.6.1.4.1.20044.17.3.3.163.1.2`

pm254dMesrlineRxpwrMeasTable

table

.1.3.6.1.4.1.20044.17.3.3.164 · 1 row entry · 2 columns

Open in standard view

Uses the ekinops variant from /opt/observium/mibs/ekinops.

Command help

Walk pm254dMesrlineRxpwrMeasTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm254d-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm254d-MIB::pm254dMesrlineRxpwrMeasTable'

List of pm254dMesrlineRxpwrMeas 
Article

pm254dMesrlineRxpwrMeasEntry row .1.3.6.1.4.1.20044.17.3.3.164.1

Row definition for the pm254dMesrlineRxpwrMeas
table

Indexes

pm254dMesrlineRxpwrMeasIndex

Column	Syntax	OID
pm254dMesrlineRxpwrMeasIndex Index definition for the pm254dMesrlineRxpwrMeas table	Integer32 Constraints: `range: 0-128`	`.1.3.6.1.4.1.20044.17.3.3.164.1.1`
pm254dMesrlineRxpwrMeasPortn Line SFP Rx Power :This OID gives the receive power value of the Line SFP, read in the DDM (Digital Diagnostic Monitoring) (Power = 10*log(AV)-40) (Unit = dBm) <Help> This measure gives the Rx optical power of t…	Integer32 Constraints: `range: 0-65535`	`.1.3.6.1.4.1.20044.17.3.3.164.1.2`

pm254dCntclientUpRaRemCntTable

table

.1.3.6.1.4.1.20044.17.4.2.16 · 1 row entry · 4 columns

Open in standard view

Uses the ekinops variant from /opt/observium/mibs/ekinops.

Command help

Walk pm254dCntclientUpRaRemCntTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm254d-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm254d-MIB::pm254dCntclientUpRaRemCntTable'

List of pm254dCntclientUpRaRemCnt 
Article

pm254dCntclientUpRaRemCntEntry row .1.3.6.1.4.1.20044.17.4.2.16.1

Row definition for the pm254dCntclientUpRaRemCnt
table

Indexes

pm254dCntclientUpRaRemCntIndex

Column Syntax OID

pm254dCntclientUpRaRemCntIndex

Index definition for the pm254dCntclientUpRaRemCnt
table

Integer32

Constraints:
range: 0-128

.1.3.6.1.4.1.20044.17.4.2.16.1.1

pm254dCntclientUpRaRemCntValuePortn

Client Rate Adapt. Words Removal
:This counter is incremented each
time a rate adaptation 10B word
is removed from the Client input
stream

SNMPv2-SMICounter32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.20044.17.4.2.16.1.2

pm254dCntclientUpRaRemCntErrorPortn

Client Counter Error :This OID
when set indicates the rate adaptation
removal counter value is invalid
on Port

EKINOPS-MIBEkiOnOff

Type Values:

1	off
2	on

.1.3.6.1.4.1.20044.17.4.2.16.1.3

pm254dCntclientUpRaRemCntOverloadPortn

Client Counter Overload :This
OID when set indicates a rate
adaptation removal counter overload
on Port

EKINOPS-MIBEkiOnOff

Type Values:

1	off
2	on

.1.3.6.1.4.1.20044.17.4.2.16.1.4

pm254dCntclientUpRaInsCntTable

table

.1.3.6.1.4.1.20044.17.4.2.24 · 1 row entry · 4 columns

Open in standard view

Uses the ekinops variant from /opt/observium/mibs/ekinops.

Command help

Walk pm254dCntclientUpRaInsCntTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm254d-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm254d-MIB::pm254dCntclientUpRaInsCntTable'

List of pm254dCntclientUpRaInsCnt 
Article

pm254dCntclientUpRaInsCntEntry row .1.3.6.1.4.1.20044.17.4.2.24.1

Row definition for the pm254dCntclientUpRaInsCnt
table

Indexes

pm254dCntclientUpRaInsCntIndex

Column Syntax OID

pm254dCntclientUpRaInsCntIndex

Index definition for the pm254dCntclientUpRaInsCnt
table

Integer32

Constraints:
range: 0-128

.1.3.6.1.4.1.20044.17.4.2.24.1.1

pm254dCntclientUpRaInsCntValuePortn

Client Rate Adapt. Words Insertion
:This counter is incremented each
time a rate adaptation 10B word
is inserted in the Client input
stream

SNMPv2-SMICounter32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.20044.17.4.2.24.1.2

pm254dCntclientUpRaInsCntErrorPortn

Client Counter Error :This OID
when set indicates the rate adaptation
insertion counter value is invalid
on Port

EKINOPS-MIBEkiOnOff

Type Values:

1	off
2	on

.1.3.6.1.4.1.20044.17.4.2.24.1.3

pm254dCntclientUpRaInsCntOverloadPortn

Client Counter Overload :This
OID when set indicates a rate
adaptation insertion counter overload
on Port

EKINOPS-MIBEkiOnOff

Type Values:

1	off
2	on

.1.3.6.1.4.1.20044.17.4.2.24.1.4

pm254dCntclientUpDispErrCntTable

table

.1.3.6.1.4.1.20044.17.4.2.32 · 1 row entry · 4 columns

Open in standard view

Uses the ekinops variant from /opt/observium/mibs/ekinops.

Command help

Walk pm254dCntclientUpDispErrCntTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm254d-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm254d-MIB::pm254dCntclientUpDispErrCntTable'

List of pm254dCntclientUpDispErrCnt 
Article

pm254dCntclientUpDispErrCntEntry row .1.3.6.1.4.1.20044.17.4.2.32.1

Row definition for the pm254dCntclientUpDispErrCnt
table

Indexes

pm254dCntclientUpDispErrCntIndex

Column Syntax OID

pm254dCntclientUpDispErrCntIndex

Index definition for the pm254dCntclientUpDispErrCnt
table

Integer32

Constraints:
range: 0-128

.1.3.6.1.4.1.20044.17.4.2.32.1.1

pm254dCntclientUpDispErrCntValuePortn

Client Input Errors :This counter
is incremented each time a running
disparity error or a 10b/8b decoding
violation is detected on the Client
input stream <Help> This counter
gives the number of 10b/8b running
d…

SNMPv2-SMICounter32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.20044.17.4.2.32.1.2

pm254dCntclientUpDispErrCntErrorPortn

Client Counter Error :This OID
when set indicates the 10B/8B decoding
violations counter value is invalid
on Port

EKINOPS-MIBEkiOnOff

Type Values:

1	off
2	on

.1.3.6.1.4.1.20044.17.4.2.32.1.3

pm254dCntclientUpDispErrCntOverloadPortn

Client Counter Overload :This
OID when set indicates a 10B/8B
decoding violations counter overload
on Port

EKINOPS-MIBEkiOnOff

Type Values:

1	off
2	on

.1.3.6.1.4.1.20044.17.4.2.32.1.4

pm254dCntclientUpTimCntTable

table

.1.3.6.1.4.1.20044.17.4.2.40 · 1 row entry · 4 columns

Open in standard view

Uses the ekinops variant from /opt/observium/mibs/ekinops.

Command help

Walk pm254dCntclientUpTimCntTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm254d-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm254d-MIB::pm254dCntclientUpTimCntTable'

List of pm254dCntclientUpTimCnt 
Article

pm254dCntclientUpTimCntEntry row .1.3.6.1.4.1.20044.17.4.2.40.1

Row definition for the pm254dCntclientUpTimCnt
table

Indexes

pm254dCntclientUpTimCntIndex

Column Syntax OID

pm254dCntclientUpTimCntIndex

Index definition for the pm254dCntclientUpTimCnt
table

Integer32

Constraints:
range: 0-128

.1.3.6.1.4.1.20044.17.4.2.40.1.1

pm254dCntclientUpTimCntValuePortn

Client Upstream Timer Counter
:This is the timing counter dedicated
to the upstream access counters.
It is incremented every 125 us.

SNMPv2-SMICounter32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.20044.17.4.2.40.1.2

pm254dCntclientUpTimCntErrorPortn

Client Counter Error :This OID
when set indicates the upstream
timing counter value is invalid
on Port

EKINOPS-MIBEkiOnOff

Type Values:

1	off
2	on

.1.3.6.1.4.1.20044.17.4.2.40.1.3

pm254dCntclientUpTimCntOverloadPortn

Client Counter Overload :This
OID when set indicates a upstream
timing counter overload on Port

EKINOPS-MIBEkiOnOff

Type Values:

1	off
2	on

.1.3.6.1.4.1.20044.17.4.2.40.1.4

pm254dCntclientDwCbipCntTable

table

.1.3.6.1.4.1.20044.17.4.2.64 · 1 row entry · 4 columns

Open in standard view

Uses the ekinops variant from /opt/observium/mibs/ekinops.

Command help

Walk pm254dCntclientDwCbipCntTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm254d-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm254d-MIB::pm254dCntclientDwCbipCntTable'

List of pm254dCntclientDwCbipCnt 
Article

pm254dCntclientDwCbipCntEntry row .1.3.6.1.4.1.20044.17.4.2.64.1

Row definition for the pm254dCntclientDwCbipCnt
table

Indexes

pm254dCntclientDwCbipCntIndex

Column Syntax OID

pm254dCntclientDwCbipCntIndex

Index definition for the pm254dCntclientDwCbipCnt
table

Integer32

Constraints:
range: 0-128

.1.3.6.1.4.1.20044.17.4.2.64.1.1

pm254dCntclientDwCbipCntValuePortn

Client CBIP Errors :This counter
is incremented each time a CBIP
parity error is detected on the
Client output stream <Help> This
counter gives the number of CBIP
errors on the client port

SNMPv2-SMICounter32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.20044.17.4.2.64.1.2

pm254dCntclientDwCbipCntErrorPortn

Client Counter Error :This OID
when set indicates the CBIP error
counter value is invalid on Port

EKINOPS-MIBEkiOnOff

Type Values:

1	off
2	on

.1.3.6.1.4.1.20044.17.4.2.64.1.3

pm254dCntclientDwCbipCntOverloadPortn

Client CBIP Counter Overload :This
OID when set indicates a CBIP error
counter overload on Port

EKINOPS-MIBEkiOnOff

Type Values:

1	off
2	on

.1.3.6.1.4.1.20044.17.4.2.64.1.4

pm254dCntclientDwTimCntTable

table

.1.3.6.1.4.1.20044.17.4.2.72 · 1 row entry · 4 columns

Open in standard view

Uses the ekinops variant from /opt/observium/mibs/ekinops.

Command help

Walk pm254dCntclientDwTimCntTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm254d-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm254d-MIB::pm254dCntclientDwTimCntTable'

List of pm254dCntclientDwTimCnt 
Article

pm254dCntclientDwTimCntEntry row .1.3.6.1.4.1.20044.17.4.2.72.1

Row definition for the pm254dCntclientDwTimCnt
table

Indexes

pm254dCntclientDwTimCntIndex

Column Syntax OID

pm254dCntclientDwTimCntIndex

Index definition for the pm254dCntclientDwTimCnt
table

Integer32

Constraints:
range: 0-128

.1.3.6.1.4.1.20044.17.4.2.72.1.1

pm254dCntclientDwTimCntValuePortn

Client Downstream Timer Counter
:This is the timing counter dedicated
to the downstream access counters.
It is incremented every 125 us.

SNMPv2-SMICounter32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.20044.17.4.2.72.1.2

pm254dCntclientDwTimCntErrorPortn

Client Counter Error :This OID
when set indicates the downstream
timer counter value is invalid
on Port

EKINOPS-MIBEkiOnOff

Type Values:

1	off
2	on

.1.3.6.1.4.1.20044.17.4.2.72.1.3

pm254dCntclientDwTimCntOverloadPortn

Client Counter Overload :This
OID when set indicates a downstream
timer counter overload on Port

EKINOPS-MIBEkiOnOff

Type Values:

1	off
2	on

.1.3.6.1.4.1.20044.17.4.2.72.1.4

pm254dCntlineDfrmB1ErrCntTable

table

.1.3.6.1.4.1.20044.17.4.3.152 · 1 row entry · 4 columns

Open in standard view

Uses the ekinops variant from /opt/observium/mibs/ekinops.

Command help

Walk pm254dCntlineDfrmB1ErrCntTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm254d-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm254d-MIB::pm254dCntlineDfrmB1ErrCntTable'

List of pm254dCntlineDfrmB1ErrCnt 
Article

pm254dCntlineDfrmB1ErrCntEntry row .1.3.6.1.4.1.20044.17.4.3.152.1

Row definition for the pm254dCntlineDfrmB1ErrCnt
table

Indexes

pm254dCntlineDfrmB1ErrCntIndex

Column Syntax OID

pm254dCntlineDfrmB1ErrCntIndex

Index definition for the pm254dCntlineDfrmB1ErrCnt
table

Integer32

Constraints:
range: 0-128

.1.3.6.1.4.1.20044.17.4.3.152.1.1

pm254dCntlineDfrmB1ErrCntValuePortn

Line B1 Errors :This counter is
incremented each time a B1 error
is detected on the Deframer input
stream. <Help> This counter gives
the number of B1 errors on the
line port

SNMPv2-SMICounter32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.20044.17.4.3.152.1.2

pm254dCntlineDfrmB1ErrCntErrorPortn

Line Counter Error :This OID when
set indicates the B1 error counter
value is invalid on Port

EKINOPS-MIBEkiOnOff

Type Values:

1	off
2	on

.1.3.6.1.4.1.20044.17.4.3.152.1.3

pm254dCntlineDfrmB1ErrCntOverloadPortn

Line Counter Overload :This OID
when set indicates a B1 error counter
overload on Port

EKINOPS-MIBEkiOnOff

Type Values:

1	off
2	on

.1.3.6.1.4.1.20044.17.4.3.152.1.4

pm254dCntlineDfrmTimCntTable

table

.1.3.6.1.4.1.20044.17.4.3.153 · 1 row entry · 4 columns

Open in standard view

Uses the ekinops variant from /opt/observium/mibs/ekinops.

Command help

Walk pm254dCntlineDfrmTimCntTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm254d-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm254d-MIB::pm254dCntlineDfrmTimCntTable'

List of pm254dCntlineDfrmTimCnt 
Article

pm254dCntlineDfrmTimCntEntry row .1.3.6.1.4.1.20044.17.4.3.153.1

Row definition for the pm254dCntlineDfrmTimCnt
table

Indexes

pm254dCntlineDfrmTimCntIndex

Column Syntax OID

pm254dCntlineDfrmTimCntIndex

Index definition for the pm254dCntlineDfrmTimCnt
table

Integer32

Constraints:
range: 0-128

.1.3.6.1.4.1.20044.17.4.3.153.1.1

pm254dCntlineDfrmTimCntValuePortn

Line Timer Counter :This is the
timing counter dedicated to the
downstream deframer counters. It
is incremented every 125 us.

SNMPv2-SMICounter32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.20044.17.4.3.153.1.2

pm254dCntlineDfrmTimCntErrorPortn

Line Counter Error :This OID when
set indicates the deframer timer
counter value is invalid on Port

EKINOPS-MIBEkiOnOff

Type Values:

1	off
2	on

.1.3.6.1.4.1.20044.17.4.3.153.1.3

pm254dCntlineDfrmTimCntOverloadPortn

Line Counter Overload :This OID
when set indicates a deframer timer
counter overload on Port

EKINOPS-MIBEkiOnOff

Type Values:

1	off
2	on

.1.3.6.1.4.1.20044.17.4.3.153.1.4

pm254dCtrlclientAccessLoopTable

table

.1.3.6.1.4.1.20044.17.6.2.16 · 1 row entry · 2 columns

Open in standard view

Uses the ekinops variant from /opt/observium/mibs/ekinops.

Command help

Walk pm254dCtrlclientAccessLoopTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm254d-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm254d-MIB::pm254dCtrlclientAccessLoopTable'

List of pm254dCtrlclientAccessLoop 
Article

pm254dCtrlclientAccessLoopEntry row .1.3.6.1.4.1.20044.17.6.2.16.1

Row definition for the pm254dCtrlclientAccessLoop
table

Indexes

pm254dCtrlclientAccessLoopIndex

Column Syntax OID

pm254dCtrlclientAccessLoopIndex

Index definition for the pm254dCtrlclientAccessLoop
table

Integer32

Constraints:
range: 0-128

.1.3.6.1.4.1.20044.17.6.2.16.1.1

pm254dCtrlclientAccessLoopPortn

Client Facility Loopback :This
OID operates a Client Facility
Loopback, looping client input
signal on the client output port.
The loop is located on the client
transceiver <Help> This maintenance
parameter opera…

EKINOPS-MIBEkiStater/w

Type Values:

1	disabled
2	enabled

.1.3.6.1.4.1.20044.17.6.2.16.1.2

pm254dCtrlclientOosModeTable

table

.1.3.6.1.4.1.20044.17.6.2.18 · 1 row entry · 2 columns

Open in standard view

Uses the ekinops variant from /opt/observium/mibs/ekinops.

Command help

Walk pm254dCtrlclientOosModeTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm254d-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm254d-MIB::pm254dCtrlclientOosModeTable'

List of pm254dCtrlclientOosMode 
Article

pm254dCtrlclientOosModeEntry row .1.3.6.1.4.1.20044.17.6.2.18.1

Row definition for the pm254dCtrlclientOosMode
table

Indexes

pm254dCtrlclientOosModeIndex

Column Syntax OID

pm254dCtrlclientOosModeIndex

Index definition for the pm254dCtrlclientOosMode
table

Integer32

Constraints:
range: 0-128

.1.3.6.1.4.1.20044.17.6.2.18.1.1

pm254dCtrlclientOosModePortn

Client Port Out Of Service :This
OID sets the client port Out Of
Service <Help> This controls
defines the service state of the
client port

EKINOPS-MIBEkiStater/w

Type Values:

1	disabled
2	enabled

.1.3.6.1.4.1.20044.17.6.2.18.1.2

pm254dCtrlclientSfpOnOffCtrlTable

table

.1.3.6.1.4.1.20044.17.6.2.20 · 1 row entry · 2 columns

Open in standard view

Uses the ekinops variant from /opt/observium/mibs/ekinops.

Command help

Walk pm254dCtrlclientSfpOnOffCtrlTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm254d-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm254d-MIB::pm254dCtrlclientSfpOnOffCtrlTable'

List of pm254dCtrlclientSfpOnOffCtrl 
Article

pm254dCtrlclientSfpOnOffCtrlEntry row .1.3.6.1.4.1.20044.17.6.2.20.1

Row definition for the pm254dCtrlclientSfpOnOffCtrl
table

Indexes

pm254dCtrlclientSfpOnOffCtrlIndex

Column Syntax OID

pm254dCtrlclientSfpOnOffCtrlIndex

Index definition for the pm254dCtrlclientSfpOnOffCtrl
table

Integer32

Constraints:
range: 0-128

.1.3.6.1.4.1.20044.17.6.2.20.1.1

pm254dCtrlclientSfpOnOffCtrlPortn

Client SFP Laser Shutdown :This
OID switches off the Client SFP.
<Help> This control defines the
laser state of the client transceiver

EKINOPS-MIBEkiStater/w

Type Values:

1	disabled
2	enabled

.1.3.6.1.4.1.20044.17.6.2.20.1.2

pm254dCtrlclientCsfUpInsTable

table

.1.3.6.1.4.1.20044.17.6.2.21 · 1 row entry · 2 columns

Open in standard view

Uses the ekinops variant from /opt/observium/mibs/ekinops.

Command help

Walk pm254dCtrlclientCsfUpInsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm254d-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm254d-MIB::pm254dCtrlclientCsfUpInsTable'

List of pm254dCtrlclientCsfUpIns 
Article

pm254dCtrlclientCsfUpInsEntry row .1.3.6.1.4.1.20044.17.6.2.21.1

Row definition for the pm254dCtrlclientCsfUpIns
table

Indexes

pm254dCtrlclientCsfUpInsIndex

Column Syntax OID

pm254dCtrlclientCsfUpInsIndex

Index definition for the pm254dCtrlclientCsfUpIns
table

Integer32

Constraints:
range: 0-128

.1.3.6.1.4.1.20044.17.6.2.21.1.1

pm254dCtrlclientCsfUpInsPortn

Client Signal Fail Insertion :This
OID, when set, inserts a client
signal fail in the upstream client
Port. <Help> This control inserts
a Client Signal Fail for the client
port

EKINOPS-MIBEkiStater/w

Type Values:

1	disabled
2	enabled

.1.3.6.1.4.1.20044.17.6.2.21.1.2

pm254dCtrlclientCaisDwInsTable

table

.1.3.6.1.4.1.20044.17.6.2.22 · 1 row entry · 2 columns

Open in standard view

Uses the ekinops variant from /opt/observium/mibs/ekinops.

Command help

Walk pm254dCtrlclientCaisDwInsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm254d-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm254d-MIB::pm254dCtrlclientCaisDwInsTable'

List of pm254dCtrlclientCaisDwIns 
Article

pm254dCtrlclientCaisDwInsEntry row .1.3.6.1.4.1.20044.17.6.2.22.1

Row definition for the pm254dCtrlclientCaisDwIns
table

Indexes

pm254dCtrlclientCaisDwInsIndex

Column Syntax OID

pm254dCtrlclientCaisDwInsIndex

Index definition for the pm254dCtrlclientCaisDwIns
table

Integer32

Constraints:
range: 0-128

.1.3.6.1.4.1.20044.17.6.2.22.1.1

pm254dCtrlclientCaisDwInsPortn

Client AIS Insertion :This OID,
when set, inserts a client AIS
on the downstream client Port.
<Help> This control inserts a
Client AIS for the client port

EKINOPS-MIBEkiStater/w

Type Values:

1	disabled
2	enabled

.1.3.6.1.4.1.20044.17.6.2.22.1.2

pm254dCtrlclientAccessTermLoopTable

table

.1.3.6.1.4.1.20044.17.6.2.26 · 1 row entry · 2 columns

Open in standard view

Uses the ekinops variant from /opt/observium/mibs/ekinops.

Command help

Walk pm254dCtrlclientAccessTermLoopTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm254d-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm254d-MIB::pm254dCtrlclientAccessTermLoopTable'

List of pm254dCtrlclientAccessTermLoop 
Article

pm254dCtrlclientAccessTermLoopEntry row .1.3.6.1.4.1.20044.17.6.2.26.1

Row definition for the pm254dCtrlclientAccessTermLoop
table

Indexes

pm254dCtrlclientAccessTermLoopIndex

Column Syntax OID

pm254dCtrlclientAccessTermLoopIndex

Index definition for the pm254dCtrlclientAccessTermLoop
table

Integer32

Constraints:
range: 0-128

.1.3.6.1.4.1.20044.17.6.2.26.1.1

pm254dCtrlclientAccessTermLoopPortn

Client Terminal Loopback :This
OID operates a Client Terminal
Loopback, looping client input
signal on the client output port.
The loop is located on the line
transceiver <Help> This maintenance
parameter operate…

EKINOPS-MIBEkiStater/w

Type Values:

1	disabled
2	enabled

.1.3.6.1.4.1.20044.17.6.2.26.1.2

pm254dCtrlProtocolTable

table

.1.3.6.1.4.1.20044.17.6.2.48 · 1 row entry · 2 columns

Open in standard view

Uses the ekinops variant from /opt/observium/mibs/ekinops.

Command help

Walk pm254dCtrlProtocolTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm254d-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm254d-MIB::pm254dCtrlProtocolTable'

List of pm254dCtrlProtocol Article

pm254dCtrlProtocolEntry row .1.3.6.1.4.1.20044.17.6.2.48.1

Row definition for the pm254dCtrlProtocol
table

Indexes

pm254dCtrlProtocolIndex

Column Syntax OID

pm254dCtrlProtocolIndex

Index definition for the pm254dCtrlProtocol
table

Integer32

Constraints:
range: 0-128

.1.3.6.1.4.1.20044.17.6.2.48.1.1

pm254dCtrlProtocolPortn

Client Protocol: This OID sets
the protocol of the Client port.

EKINOPS-MIBEkiProtocolr/w

Type Values:

1	protGBE
2	prot1GFC
3	prot2GFC
4	protOC48
6	protclearchannel
8	prot10GBE
9	protOC192
10	protStm1
11	protStm4
12	prot2GBE
13	prot4GFC
14	protEscon
15	protFastEth

.1.3.6.1.4.1.20044.17.6.2.48.1.2

pm254dCtrllineUpS1Table

table

.1.3.6.1.4.1.20044.17.6.3.70 · 1 row entry · 2 columns

Open in standard view

Uses the ekinops variant from /opt/observium/mibs/ekinops.

Command help

Walk pm254dCtrllineUpS1Table

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm254d-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm254d-MIB::pm254dCtrllineUpS1Table'

List of pm254dCtrllineUpS1 Article

pm254dCtrllineUpS1Entry row .1.3.6.1.4.1.20044.17.6.3.70.1

Row definition for the pm254dCtrllineUpS1
table

Indexes

pm254dCtrllineUpS1Index

Column	Syntax	OID
pm254dCtrllineUpS1Index Index definition for the pm254dCtrllineUpS1 table	Integer32 Constraints: `range: 0-128`	`.1.3.6.1.4.1.20044.17.6.3.70.1.1`
pm254dCtrllineUpS1Portn S1 Value Inserted On Lines Output :The value to be written in the S1 byte of the two upstream OC-48c/STM-16c signals is accessible through the present OID	Integer32r/w Constraints: `range: 0-1`	`.1.3.6.1.4.1.20044.17.6.3.70.1.2`

pm254dCtrllineUpK1Table

table

.1.3.6.1.4.1.20044.17.6.3.71 · 1 row entry · 2 columns

Open in standard view

Uses the ekinops variant from /opt/observium/mibs/ekinops.

Command help

Walk pm254dCtrllineUpK1Table

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm254d-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm254d-MIB::pm254dCtrllineUpK1Table'

List of pm254dCtrllineUpK1 Article

pm254dCtrllineUpK1Entry row .1.3.6.1.4.1.20044.17.6.3.71.1

Row definition for the pm254dCtrllineUpK1
table

Indexes

pm254dCtrllineUpK1Index

Column	Syntax	OID
pm254dCtrllineUpK1Index Index definition for the pm254dCtrllineUpK1 table	Integer32 Constraints: `range: 0-128`	`.1.3.6.1.4.1.20044.17.6.3.71.1.1`
pm254dCtrllineUpK1Portn K1 Value Inserted On Lines Output :The value to be written in the K1 byte of the two upstream OC-48c/STM-16c signals is accessible through the present OID	Integer32r/w Constraints: `range: 0-1`	`.1.3.6.1.4.1.20044.17.6.3.71.1.2`

pm254dCtrllineUpK2Table

table

.1.3.6.1.4.1.20044.17.6.3.72 · 1 row entry · 2 columns

Open in standard view

Uses the ekinops variant from /opt/observium/mibs/ekinops.

Command help

Walk pm254dCtrllineUpK2Table

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm254d-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm254d-MIB::pm254dCtrllineUpK2Table'

List of pm254dCtrllineUpK2 Article

pm254dCtrllineUpK2Entry row .1.3.6.1.4.1.20044.17.6.3.72.1

Row definition for the pm254dCtrllineUpK2
table

Indexes

pm254dCtrllineUpK2Index

Column	Syntax	OID
pm254dCtrllineUpK2Index Index definition for the pm254dCtrllineUpK2 table	Integer32 Constraints: `range: 0-128`	`.1.3.6.1.4.1.20044.17.6.3.72.1.1`
pm254dCtrllineUpK2Portn K2 Value Inserted On Lines Output :The value to be written in the K2 byte of the two upstream OC-48c/STM-16c signals is accessible through the present OID	Integer32r/w Constraints: `range: 0-1`	`.1.3.6.1.4.1.20044.17.6.3.72.1.2`

pm254dCtrllineOosModeTable

table

.1.3.6.1.4.1.20044.17.6.3.74 · 1 row entry · 2 columns

Open in standard view

Uses the ekinops variant from /opt/observium/mibs/ekinops.

Command help

Walk pm254dCtrllineOosModeTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm254d-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm254d-MIB::pm254dCtrllineOosModeTable'

List of pm254dCtrllineOosMode
Article

pm254dCtrllineOosModeEntry row .1.3.6.1.4.1.20044.17.6.3.74.1

Row definition for the pm254dCtrllineOosMode
table

Indexes

pm254dCtrllineOosModeIndex

Column Syntax OID

pm254dCtrllineOosModeIndex

Index definition for the pm254dCtrllineOosMode
table

Integer32

Constraints:
range: 0-128

.1.3.6.1.4.1.20044.17.6.3.74.1.1

pm254dCtrllineOosModePortn

Line Port Out Of Service :This
OID sets the line port Out Of Service
<Help> This control defines the
service state of the line port

EKINOPS-MIBEkiStater/w

Type Values:

1	disabled
2	enabled

.1.3.6.1.4.1.20044.17.6.3.74.1.2

pm254dCtrllineAccessLoopTable

table

.1.3.6.1.4.1.20044.17.6.3.160 · 1 row entry · 2 columns

Open in standard view

Uses the ekinops variant from /opt/observium/mibs/ekinops.

Command help

Walk pm254dCtrllineAccessLoopTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm254d-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm254d-MIB::pm254dCtrllineAccessLoopTable'

List of pm254dCtrllineAccessLoop 
Article

pm254dCtrllineAccessLoopEntry row .1.3.6.1.4.1.20044.17.6.3.160.1

Row definition for the pm254dCtrllineAccessLoop
table

Indexes

pm254dCtrllineAccessLoopIndex

Column Syntax OID

pm254dCtrllineAccessLoopIndex

Index definition for the pm254dCtrllineAccessLoop
table

Integer32

Constraints:
range: 0-128

.1.3.6.1.4.1.20044.17.6.3.160.1.1

pm254dCtrllineAccessLoopPortn

Line Facility Loopback :This OID
operates a Line Facility Loopback,
looping line input signal on the
line output port. The loop is located
on the line transceiver. If the
Line signal carries DCC, the management
ne…

EKINOPS-MIBEkiStater/w

Type Values:

1	disabled
2	enabled

.1.3.6.1.4.1.20044.17.6.3.160.1.2

pm254dCtrllineLoopTransceiverTable

table

.1.3.6.1.4.1.20044.17.6.3.161 · 1 row entry · 2 columns

Open in standard view

Uses the ekinops variant from /opt/observium/mibs/ekinops.

Command help

Walk pm254dCtrllineLoopTransceiverTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm254d-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm254d-MIB::pm254dCtrllineLoopTransceiverTable'

List of pm254dCtrllineLoopTransceiver 
Article

pm254dCtrllineLoopTransceiverEntry row .1.3.6.1.4.1.20044.17.6.3.161.1

Row definition for the pm254dCtrllineLoopTransceiver
table

Indexes

pm254dCtrllineLoopTransceiverIndex

Column Syntax OID

pm254dCtrllineLoopTransceiverIndex

Index definition for the pm254dCtrllineLoopTransceiver
table

Integer32

Constraints:
range: 0-128

.1.3.6.1.4.1.20044.17.6.3.161.1.1

pm254dCtrllineLoopTransceiverPortn

Line Terminal Loopback :This OID
operates a Line Terminal Loopback,
looping line input signal on the
line output port. The loop is located
on all client transceivers <Help>
This maintenance parameter operates
a L…

EKINOPS-MIBEkiStater/w

Type Values:

1	disabled
2	enabled

.1.3.6.1.4.1.20044.17.6.3.161.1.2

pm254dCtrllineSfpOnOffCtrlTable

table

.1.3.6.1.4.1.20044.17.6.3.162 · 1 row entry · 2 columns

Open in standard view

Uses the ekinops variant from /opt/observium/mibs/ekinops.

Command help

Walk pm254dCtrllineSfpOnOffCtrlTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm254d-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm254d-MIB::pm254dCtrllineSfpOnOffCtrlTable'

List of pm254dCtrllineSfpOnOffCtrl 
Article

pm254dCtrllineSfpOnOffCtrlEntry row .1.3.6.1.4.1.20044.17.6.3.162.1

Row definition for the pm254dCtrllineSfpOnOffCtrl
table

Indexes

pm254dCtrllineSfpOnOffCtrlIndex

Column Syntax OID

pm254dCtrllineSfpOnOffCtrlIndex

Index definition for the pm254dCtrllineSfpOnOffCtrl
table

Integer32

Constraints:
range: 0-128

.1.3.6.1.4.1.20044.17.6.3.162.1.1

pm254dCtrllineSfpOnOffCtrlPortn

Line SFP Laser Shutdown :This
OID switches off the Line SFP.
<Help> This control defines the
laser state of the line transceiver

EKINOPS-MIBEkiStater/w

Type Values:

1	disabled
2	enabled

.1.3.6.1.4.1.20044.17.6.3.162.1.2

pm254dCtrldccEnableTable

table

.1.3.6.1.4.1.20044.17.6.3.198 · 1 row entry · 2 columns

Open in standard view

Uses the ekinops variant from /opt/observium/mibs/ekinops.

Command help

Walk pm254dCtrldccEnableTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm254d-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm254d-MIB::pm254dCtrldccEnableTable'

List of pm254dCtrldccEnable Article

pm254dCtrldccEnableEntry row .1.3.6.1.4.1.20044.17.6.3.198.1

Row definition for the pm254dCtrldccEnable
table

Indexes

pm254dCtrldccEnableIndex

Column Syntax OID

pm254dCtrldccEnableIndex

Index definition for the pm254dCtrldccEnable
table

Integer32

Constraints:
range: 0-128

.1.3.6.1.4.1.20044.17.6.3.198.1.1

pm254dCtrldccEnablePortn

DCC Mode : This OID enables the
DCC mode on the PM <Help> This
control enables the DCC mode on
the PM

EKINOPS-MIBEkiStater/w

Type Values:

1	disabled
2	enabled

.1.3.6.1.4.1.20044.17.6.3.198.1.2

pm254dRinvClientTable

table

.1.3.6.1.4.1.20044.17.7.1.1 · 1 row entry · 2 columns

Open in standard view

Uses the ekinops variant from /opt/observium/mibs/ekinops.

Command help

Walk pm254dRinvClientTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm254d-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm254d-MIB::pm254dRinvClientTable'

List of the SFPs on the selected module

pm254dRinvClientEntry row .1.3.6.1.4.1.20044.17.7.1.1.1

Row definition for the Client SFP table

Indexes

pm254dRinvClientIndex

Column	Syntax	OID
pm254dRinvClientIndex Index for Client SFP table	Integer32 Constraints: `range: 1-16`	`.1.3.6.1.4.1.20044.17.7.1.1.1.1`
pm254dRinvSfpClient Inventory for the SFP: This OID contains the inventory for the Client SFP	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.20044.17.7.1.1.1.2`

pm254dRinvLineTable

table

.1.3.6.1.4.1.20044.17.7.1.2 · 1 row entry · 2 columns

Open in standard view

Uses the ekinops variant from /opt/observium/mibs/ekinops.

Command help

Walk pm254dRinvLineTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm254d-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm254d-MIB::pm254dRinvLineTable'

List of the SFPs on the selected module

pm254dRinvLineEntry row .1.3.6.1.4.1.20044.17.7.1.2.1

Row definition for the SFP table

Indexes

pm254dRinvLineIndex

Column	Syntax	OID
pm254dRinvLineIndex Index for SFP table	Integer32 Constraints: `range: 1-16`	`.1.3.6.1.4.1.20044.17.7.1.2.1.1`
pm254dRinvsfpLine Inventory for the SFP: This OID contains the inventory for the Line SFP	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.20044.17.7.1.2.1.2`

pm254dCfgClientcaiscsfTable

table

.1.3.6.1.4.1.20044.17.9.1.1 · 1 row entry · 8 columns

Open in standard view

Uses the ekinops variant from /opt/observium/mibs/ekinops.

Command help

Walk pm254dCfgClientcaiscsfTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm254d-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm254d-MIB::pm254dCfgClientcaiscsfTable'

List of  Article

pm254dCfgClientcaiscsfEntry row .1.3.6.1.4.1.20044.17.9.1.1.1

Row definition for the accessCAisCsf
table

Indexes

pm254dCfgClientcaiscsfIndex

Column	Syntax	OID
pm254dCfgClientcaiscsfIndex Index definition for the clientcaiscsf table	Integer32 Constraints: `range: 0-128`	`.1.3.6.1.4.1.20044.17.9.1.1.1.1`
pm254dCfgCAisModePortn CAIS mode on Client Port :This register enables/disables Client Port laser shutdown on CAIS insertion condition	Unsigned32r/w Constraints: `range: 0-65536`	`.1.3.6.1.4.1.20044.17.9.1.1.1.3`
pm254dCfgSts24cContribPortn Sts24c contributors on Client Port :This register selects the contributors of STS24c to downstream CAIS/CSF on Port	Unsigned32r/w Constraints: `range: 0-65536`	`.1.3.6.1.4.1.20044.17.9.1.1.1.4`
pm254dCfgUpAccessioAlmPortn CSF contributors on Client Port :This register configures the contributors to upstream CSF insertion on the Client Port.	Unsigned32r/w Constraints: `range: 0-65536`	`.1.3.6.1.4.1.20044.17.9.1.1.1.9`
pm254dCfgUpMapperDeAlmPortn CSF contributors on Client Port :This register configures the contributors to upstream CSF insertion on the Client Port.	Unsigned32r/w Constraints: `range: 0-65536`	`.1.3.6.1.4.1.20044.17.9.1.1.1.10`
pm254dCfgDownMapperDeAlmPortn CAIS contributors on Client Port :This register configures the contributors to downstream CAIS insertion on Client Port.	Unsigned32r/w Constraints: `range: 0-65536`	`.1.3.6.1.4.1.20044.17.9.1.1.1.18`
pm254dCfgDownDfrmAlmPortn CAIS contributors on Client Port :This register configures the contributors to downstream CAIS insertion on Client Port.	Unsigned32r/w Constraints: `range: 0-65536`	`.1.3.6.1.4.1.20044.17.9.1.1.1.19`
pm254dCfgDownLineIoAlmPortndeprecated CAIS contributors on Client Port :This register configures the contributors to downstream CAIS insertion on Client Port.	Unsigned32r/w Constraints: `range: 0-65536`	`.1.3.6.1.4.1.20044.17.9.1.1.1.22`

pm254dCfgClientStartupTable

table

.1.3.6.1.4.1.20044.17.9.2.1 · 1 row entry · 4 columns

Open in standard view

Uses the ekinops variant from /opt/observium/mibs/ekinops.

Command help

Walk pm254dCfgClientStartupTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm254d-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm254d-MIB::pm254dCfgClientStartupTable'

List of  Article

pm254dCfgClientStartupEntry row .1.3.6.1.4.1.20044.17.9.2.1.1

Row definition for the startup
table

Indexes

pm254dCfgClientStartupIndex

Column	Syntax	OID
pm254dCfgClientStartupIndex Index definition for the clientStartup table	Integer32 Constraints: `range: 0-128`	`.1.3.6.1.4.1.20044.17.9.2.1.1.1`
pm254dCfgSystConfPortPortn Default Settings on Client Port :This register configures the default initialisation settings on the client port.	Unsigned32r/w Constraints: `range: 0-65536`	`.1.3.6.1.4.1.20044.17.9.2.1.1.3`
pm254dCfgNetConfPortPortn Default Protocol on Client Port :This register configures the default initialisation protocol on the client port.	Unsigned32r/w Constraints: `range: 0-65536`	`.1.3.6.1.4.1.20044.17.9.2.1.1.4`
pm254dCfgPortsOptionsPortndeprecated Default Options on Client Port :This register configures the default options on the client port	Unsigned32r/w Constraints: `range: 0-65536`	`.1.3.6.1.4.1.20044.17.9.2.1.1.6`

pm254dCfgLabelclientTable

table

.1.3.6.1.4.1.20044.17.9.3.1 · 1 row entry · 2 columns

Open in standard view

Uses the ekinops variant from /opt/observium/mibs/ekinops.

Command help

Walk pm254dCfgLabelclientTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm254d-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm254d-MIB::pm254dCfgLabelclientTable'

List of  Article

pm254dCfgLabelclientEntry row .1.3.6.1.4.1.20044.17.9.3.1.1

Row definition for the labels
table

Indexes

pm254dCfgLabelclientIndex

Column	Syntax	OID
pm254dCfgLabelclientIndex Index definition for the labelclient table	Integer32 Constraints: `range: 0-128`	`.1.3.6.1.4.1.20044.17.9.3.1.1.1`
pm254dCfgLabelclientPortn Default settings on the label of the Ports :These registers configures the default initialisation settings of the labels of the ports.	SNMPv2-TCDisplayStringr/w Constraints: `range: 1-16` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.20044.17.9.3.1.1.3`

pm254dCfgLabellineTable

table

.1.3.6.1.4.1.20044.17.9.3.2 · 1 row entry · 2 columns

Open in standard view

Uses the ekinops variant from /opt/observium/mibs/ekinops.

Command help

Walk pm254dCfgLabellineTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm254d-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm254d-MIB::pm254dCfgLabellineTable'

List of  Article

pm254dCfgLabellineEntry row .1.3.6.1.4.1.20044.17.9.3.2.1

Row definition for the labels
table

Indexes

pm254dCfgLabellineIndex

Column	Syntax	OID
pm254dCfgLabellineIndex Index definition for the labelline table	Integer32 Constraints: `range: 0-128`	`.1.3.6.1.4.1.20044.17.9.3.2.1.1`
pm254dCfgLabellinePortn Default settings on the label of the lines :These registers configures the default initialisation settings of the labels of the lines.	SNMPv2-TCDisplayStringr/w Constraints: `range: 1-16` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.20044.17.9.3.2.1.3`

pm254dMonupRmonByteCntTable

table

.1.3.6.1.4.1.20044.17.11.2.4.16 · 1 row entry · 4 columns

Open in standard view

Uses the ekinops variant from /opt/observium/mibs/ekinops.

Command help

Walk pm254dMonupRmonByteCntTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm254d-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm254d-MIB::pm254dMonupRmonByteCntTable'

List of pm254dMonupRmonByteCnt 
Article

pm254dMonupRmonByteCntEntry row .1.3.6.1.4.1.20044.17.11.2.4.16.1

Row definition for the pm254dMonupRmonByteCnt
table

Indexes

pm254dMonupRmonByteCntIndex

Column Syntax OID

pm254dMonupRmonByteCntIndex

Index definition for the pm254dMonupRmonByteCnt
table

Integer32

Constraints:
range: 0-128

.1.3.6.1.4.1.20044.17.11.2.4.16.1.1

pm254dMonupRmonByteCntValuePortn

Client Input Bytes :This counter
is increased each time a data byte
is received on the client port
<Help> This counter gives the
number of bytes received on the
client port

SNMPv2-SMICounter64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.20044.17.11.2.4.16.1.2

pm254dMonupRmonByteCntErrorPortn

Bytes Counter Error :This OID
when set indicates the Bytes counter
value is invalid on clinet port

EKINOPS-MIBEkiOnOff

Type Values:

1	off
2	on

.1.3.6.1.4.1.20044.17.11.2.4.16.1.3

pm254dMonupRmonByteCntOverloadPortn

Bytes Counter Overload :This OID
when set indicates a Bytes counter
overload on client port

EKINOPS-MIBEkiOnOff

Type Values:

1	off
2	on

.1.3.6.1.4.1.20044.17.11.2.4.16.1.4

pm254dMonupRmonCrcErrorCntTable

table

.1.3.6.1.4.1.20044.17.11.2.4.24 · 1 row entry · 4 columns

Open in standard view

Uses the ekinops variant from /opt/observium/mibs/ekinops.

Command help

Walk pm254dMonupRmonCrcErrorCntTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm254d-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm254d-MIB::pm254dMonupRmonCrcErrorCntTable'

List of pm254dMonupRmonCrcErrorCnt 
Article

pm254dMonupRmonCrcErrorCntEntry row .1.3.6.1.4.1.20044.17.11.2.4.24.1

Row definition for the pm254dMonupRmonCrcErrorCnt
table

Indexes

pm254dMonupRmonCrcErrorCntIndex

Column Syntax OID

pm254dMonupRmonCrcErrorCntIndex

Index definition for the pm254dMonupRmonCrcErrorCnt
table

Integer32

Constraints:
range: 0-128

.1.3.6.1.4.1.20044.17.11.2.4.24.1.1

pm254dMonupRmonCrcErrorCntValuePortn

Client Input CRC Errors :This
counter is increased each time
a CRC error is detected on the
client port <Help> This counter
gives the number of CRC Errors
received on the client port

SNMPv2-SMICounter64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.20044.17.11.2.4.24.1.2

pm254dMonupRmonCrcErrorCntErrorPortn

CRC Errors Counter Error :This
OID when set indicates the CRC
Errors counter value is invalid
on clinet port

EKINOPS-MIBEkiOnOff

Type Values:

1	off
2	on

.1.3.6.1.4.1.20044.17.11.2.4.24.1.3

pm254dMonupRmonCrcErrorCntOverloadPortn

CRC Errors Counter Overload :This
OID when set indicates a CRC Errors
counter overload on client port

EKINOPS-MIBEkiOnOff

Type Values:

1	off
2	on

.1.3.6.1.4.1.20044.17.11.2.4.24.1.4

pm254dMonupRmonPacketsCntTable

table

.1.3.6.1.4.1.20044.17.11.2.4.32 · 1 row entry · 4 columns

Open in standard view

Uses the ekinops variant from /opt/observium/mibs/ekinops.

Command help

Walk pm254dMonupRmonPacketsCntTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm254d-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm254d-MIB::pm254dMonupRmonPacketsCntTable'

List of pm254dMonupRmonPacketsCnt 
Article

pm254dMonupRmonPacketsCntEntry row .1.3.6.1.4.1.20044.17.11.2.4.32.1

Row definition for the pm254dMonupRmonPacketsCnt
table

Indexes

pm254dMonupRmonPacketsCntIndex

Column Syntax OID

pm254dMonupRmonPacketsCntIndex

Index definition for the pm254dMonupRmonPacketsCnt
table

Integer32

Constraints:
range: 0-128

.1.3.6.1.4.1.20044.17.11.2.4.32.1.1

pm254dMonupRmonPacketsCntValuePortn

Client Input Packets :This counter
is increased each time a packet
is received on the client port
<Help> This counter gives the
number of packets received on the
client port

SNMPv2-SMICounter64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.20044.17.11.2.4.32.1.2

pm254dMonupRmonPacketsCntErrorPortn

Packets Counter Error :This OID
when set indicates the Packets
counter value is invalid on clinet
port

EKINOPS-MIBEkiOnOff

Type Values:

1	off
2	on

.1.3.6.1.4.1.20044.17.11.2.4.32.1.3

pm254dMonupRmonPacketsCntOverloadPortn

Packets Counter Overload :This
OID when set indicates a Packets
counter overload on client port

EKINOPS-MIBEkiOnOff

Type Values:

1	off
2	on

.1.3.6.1.4.1.20044.17.11.2.4.32.1.4

pm254dMonupRmonBroadcastCntTable

table

.1.3.6.1.4.1.20044.17.11.2.4.40 · 1 row entry · 4 columns

Open in standard view

Uses the ekinops variant from /opt/observium/mibs/ekinops.

Command help

Walk pm254dMonupRmonBroadcastCntTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm254d-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm254d-MIB::pm254dMonupRmonBroadcastCntTable'

List of pm254dMonupRmonBroadcastCnt 
Article

pm254dMonupRmonBroadcastCntEntry row .1.3.6.1.4.1.20044.17.11.2.4.40.1

Row definition for the pm254dMonupRmonBroadcastCnt
table

Indexes

pm254dMonupRmonBroadcastCntIndex

Column Syntax OID

pm254dMonupRmonBroadcastCntIndex

Index definition for the pm254dMonupRmonBroadcastCnt
table

Integer32

Constraints:
range: 0-128

.1.3.6.1.4.1.20044.17.11.2.4.40.1.1

pm254dMonupRmonBroadcastCntValuePortn

Client Input Broadcast Packets
:This counter is increased each
time a broadcast packet is received
on the client port <Help> This
counter gives the number of Broadcast
packets received on the client
port

SNMPv2-SMICounter64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.20044.17.11.2.4.40.1.2

pm254dMonupRmonBroadcastCntErrorPortn

Broadcast Counter Error :This
OID when set indicates the Broadcast
counter value is invalid on clinet
port

EKINOPS-MIBEkiOnOff

Type Values:

1	off
2	on

.1.3.6.1.4.1.20044.17.11.2.4.40.1.3

pm254dMonupRmonBroadcastCntOverloadPortn

Broadcast Counter Overload :This
OID when set indicates a Broadcast
counter overload on client port

EKINOPS-MIBEkiOnOff

Type Values:

1	off
2	on

.1.3.6.1.4.1.20044.17.11.2.4.40.1.4

pm254dMonupRmonMulticastCntTable

table

.1.3.6.1.4.1.20044.17.11.2.4.48 · 1 row entry · 4 columns

Open in standard view

Uses the ekinops variant from /opt/observium/mibs/ekinops.

Command help

Walk pm254dMonupRmonMulticastCntTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm254d-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm254d-MIB::pm254dMonupRmonMulticastCntTable'

List of pm254dMonupRmonMulticastCnt 
Article

pm254dMonupRmonMulticastCntEntry row .1.3.6.1.4.1.20044.17.11.2.4.48.1

Row definition for the pm254dMonupRmonMulticastCnt
table

Indexes

pm254dMonupRmonMulticastCntIndex

Column Syntax OID

pm254dMonupRmonMulticastCntIndex

Index definition for the pm254dMonupRmonMulticastCnt
table

Integer32

Constraints:
range: 0-128

.1.3.6.1.4.1.20044.17.11.2.4.48.1.1

pm254dMonupRmonMulticastCntValuePortn

Client Input Multicast Packets
:This counter is increased each
time a Multicast packet is received
on the client port <Help> This
counter gives the number of Multicast
packets received on the client
port

SNMPv2-SMICounter64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.20044.17.11.2.4.48.1.2

pm254dMonupRmonMulticastCntErrorPortn

Multicast Counter Error :This
OID when set indicates the Multicast
counter value is invalid on clinet
port

EKINOPS-MIBEkiOnOff

Type Values:

1	off
2	on

.1.3.6.1.4.1.20044.17.11.2.4.48.1.3

pm254dMonupRmonMulticastCntOverloadPortn

Multicast Counter Overload :This
OID when set indicates a Multicast
counter overload on client port

EKINOPS-MIBEkiOnOff

Type Values:

1	off
2	on

.1.3.6.1.4.1.20044.17.11.2.4.48.1.4