EKINOPS-Pm20020ma-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
95
Rows
95
Columns
534
.1.3.6.1.4.1.20044.69.2.2.1.88
·
1 row entry
·
17 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm20020maAlmclientNetworkLaneAlarmWarningTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm20020ma-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm20020ma-MIB::pm20020maAlmclientNetworkLaneAlarmWarningTable'
List of pm20020maAlmclientNetworkLaneAlarmWarning Article
Row definition for the pm20020maAlmclientNetworkLaneAlarmWarning
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm20020maAlmclientNetworkLaneAlarmWarning
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.69.2.2.1.88.1.1 |
||||
|
Client Trscv Rx Power Low Alarm
:This OID indicates that the Trscv input power is lower than the threshold value written in the Trscv EEPROM <Help> Alarm indicating that the Trscv input power is lower than the thr… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.2.2.1.88.1.2 |
||||
|
Client Trscv Rx Power Low Warning
:This OID indicates that the Trscv input power is lower than the threshold value written in the Trscv EEPROM <Help> Warning indicating that the Trscv input power is lower than the… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.2.2.1.88.1.3 |
||||
|
Client Trscv Rx Power High Warning
:This OID indicates that the Trscv input power is higher than the threshold value written in the Trscv EEPROM <Help> Warning indicating that the Trscv input power is higher than … |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.2.2.1.88.1.4 |
||||
|
Client Trscv Rx Power High Alarm
:This OID indicates that the Trscv input power is higher than the threshold value written in the Trscv EEPROM <Help> Alarm indicating that the Trscv input power is higher than the … |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.2.2.1.88.1.5 |
||||
|
Client Trscv Laser Temp Low Alarm
:This OID indicates that the Trscv Laser Temperature is lower than the threshold value written in the Trscv EEPROM <Help> Alarm indicating that the Trscv Laser Temperature is lowe… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.2.2.1.88.1.6 |
||||
|
Client Trscv Laser Temp Low Warning
:This OID indicates that the Trscv Laser Temperature is lower than the threshold value written in the Trscv EEPROM <Help> Warning indicating that the Trscv Laser Temperature is … |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.2.2.1.88.1.7 |
||||
|
Client Trscv Laser Temp High Warning
:This OID indicates that the Trscv Laser Temperature is higher than the threshold value written in the Trscv EEPROM <Help> Warning indicating that the Trscv Laser Temperature i… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.2.2.1.88.1.8 |
||||
|
Client Trscv Laser Temp High Alarm
:This OID indicates that the Trscv Laser Temperature is higher than the threshold value written in the Trscv EEPROM <Help> Alarm indicating that the Trscv Laser Temperature is hi… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.2.2.1.88.1.9 |
||||
|
Client Trscv Tx Power Low Alarm
:This OID indicates that the Trscv output power is lower than the threshold value written in the Trscv EEPROM <Help> Alarm indicating that the Trscv output power is lower than the t… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.2.2.1.88.1.10 |
||||
|
Client Trscv Tx Power Low Warning
:This OID indicates that the Trscv output power is lower than the threshold value written in the Trscv EEPROM <Help> Warning indicating that the Trscv output power is lower than t… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.2.2.1.88.1.11 |
||||
|
Client Trscv Tx Power High Warning
:This OID indicates that the Trscv output power is higher than the threshold value written in the Trscv EEPROM <Help> Warning indicating that the Trscv output power is higher tha… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.2.2.1.88.1.12 |
||||
|
Client Trscv Tx Power High Alarm
:This OID indicates that the Trscv output power is higher than the threshold value written in the Trscv EEPROM <Help> Alarm indicating that the Trscv output power is higher than th… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.2.2.1.88.1.13 |
||||
|
Client Trscv Bias Low Alarm :This
OID indicates that the Trscv laser bias current is lower than the threshold value written in the Trscv EEPROM <Help> Alarm indicating that the Trscv laser bias current is lower th… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.2.2.1.88.1.14 |
||||
|
Client Trscv Bias Low Warning
:This OID indicates that the Trscv laser bias current is lower than the threshold value written in the Trscv EEPROM <Help> Warning indicating that the Trscv laser bias current is lowe… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.2.2.1.88.1.15 |
||||
|
Client Trscv Bias High Warning
:This OID indicates that the Trscv laser bias current is higher than the threshold value written in the Trscv EEPROM <Help> Warning indicating that the Trscv laser bias current is hi… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.2.2.1.88.1.16 |
||||
|
Client Trscv Bias High Alarm :This
OID indicates that the Trscv laser bias current is higher than the threshold value written in the Trscv EEPROM <Help> Alarm indicating that the Trscv laser bias current is higher… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.2.2.1.88.1.17 |
.1.3.6.1.4.1.20044.69.2.2.1.272
·
1 row entry
·
11 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm20020maAlmclientSfpWarnDdmTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm20020ma-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm20020ma-MIB::pm20020maAlmclientSfpWarnDdmTable'
List of pm20020maAlmclientSfpWarnDdm Article
Row definition for the pm20020maAlmclientSfpWarnDdm
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm20020maAlmclientSfpWarnDdm
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.69.2.2.1.272.1.1 |
||||
|
Client Trscv Tx Power Low Warning
:This OID indicates that the Trscv output power is lower than the threshold value written in the Trscv EEPROM <Help> Warning indicating that the Trscv output power is lower than t… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.2.2.1.272.1.2 |
||||
|
Client Trscv Tx Power High Warning
:This OID indicates that the Trscv output power is higher than the threshold value written in the Trscv EEPROM <Help> Warning indicating that the Trscv output power is higher tha… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.2.2.1.272.1.3 |
||||
|
Client Trscv Bias Low Warning
:This OID indicates that the Trscv laser bias current is lower than the threshold value written in the Trscv EEPROM <Help> Warning indicating that the Trscv laser bias current is lowe… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.2.2.1.272.1.4 |
||||
|
Client Trscv Bias High Warning
:This OID indicates that the Trscv laser bias current is higher than the threshold value written in the Trscv EEPROM <Help> Warning indicating that the Trscv laser bias current is hi… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.2.2.1.272.1.5 |
||||
|
Client Trscv Power Supply Low
Warning :This OID indicates that the Trscv power supply is lower than the threshold value written in the Trscv EEPROM <Help> Warning indicating that the Trscv power supply is lower th… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.2.2.1.272.1.6 |
||||
|
Client Trscv Power Supply High
Warning :This OID indicates that the Trscv power supply is higher than the threshold value written in the Trscv EEPROM <Help> Warning indicating that the Trscv power supply is higher… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.2.2.1.272.1.7 |
||||
|
Client Trscv Temp Low Warning
:This OID indicates that the Trscv temperature is lower than the threshold value written in the Trscv EEPROM <Help> Warning indicating that the Trscv temperature is lower than the thr… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.2.2.1.272.1.8 |
||||
|
Client Trscv Temp High Warning
:This OID indicates that the Trscv temperature is higher than the threshold value written in the Trscv EEPROM <Help> Warning indicating that the Trscv temperature is higher than the … |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.2.2.1.272.1.9 |
||||
|
Client Trscv Rx Power Low Warning
:This OID indicates that the Trscv input power is lower than the threshold value written in the Trscv EEPROM <Help> Warning indicating that the Trscv input power is lower than the… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.2.2.1.272.1.16 |
||||
|
Client Trscv Rx Power High Warning
:This OID indicates that the Trscv input power is higher than the threshold value written in the Trscv EEPROM <Help> Warning indicating that the Trscv input power is higher than … |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.2.2.1.272.1.17 |
.1.3.6.1.4.1.20044.69.2.2.2.120
·
1 row entry
·
9 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm20020maAlmclientNetworkLaneFaultTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm20020ma-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm20020ma-MIB::pm20020maAlmclientNetworkLaneFaultTable'
List of pm20020maAlmclientNetworkLaneFault Article
Row definition for the pm20020maAlmclientNetworkLaneFault
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm20020maAlmclientNetworkLaneFault
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.69.2.2.2.120.1.1 |
||||
|
Client Network Lane Rx FIFO Error
:This OID indicates a Rx FIFO Error on the Client Trscv Network Lane <Help> Alarm indicating a Rx FIFO Error on the Client Trscv Network Lane <Condtype> CLIENT_LANE_RX_FIFO_ERROR … |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.2.2.2.120.1.4 |
||||
|
Client Network Lane Rx Loss Of
Lock :This OID indicates a Rx Loss of Lock on the Client Trscv Network Lane <Help> Alarm indicating a Rx Loss of Lock on the Client Trscv Network Lane <Condtype> CLIENT_LANE_RX_LOL <… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.2.2.2.120.1.5 |
||||
|
Client Network Lane Rx Loss Of
Signal :This OID indicates a Rx Loss of Signal on the Client Trscv Network Lane <Help> Alarm indicating a Rx Loss of Signal on the Client Trscv Network Lane <Condtype> CLIENT_LANE_RX_… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.2.2.2.120.1.6 |
||||
|
Client Network Lane Tx Loss Of
Lock :This OID indicates a Tx Loss of Lock on the Client Trscv Network Lane <Help> Alarm indicating a Tx Loss of Lock on the Client Trscv Network Lane <Condtype> CLIENT_LANE_TX_LOL <… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.2.2.2.120.1.8 |
||||
|
Client Network Lane Tx Loss Of
Signal Functionality :This OID indicates a Tx Loss of Signal Functionality on the Client Trscv Network Lane <Help> Alarm indicating a Tx Loss of Signal Functionality on the Client Tr… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.2.2.2.120.1.9 |
||||
|
Client Network Lane APD Power
Supply :This OID indicates an APD Power supply failure on the Client Trscv Network Lane <Help> Alarm indicating an APD Power supply failure on the Client Trscv Network Lane <Condtype>… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.2.2.2.120.1.15 |
||||
|
Client Network Lane Wavelength
Unlock :This OID indicates a Wavelength unlock on the Client Trscv Network Lane <Help> Alarm indicating a Wavelength unlock on the Client Trscv Network Lane <Condtype> CLIENT_LANE_WAV… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.2.2.2.120.1.16 |
||||
|
Client Network Lane TEC Fault
:This OID indicates a TEC Fault on the Client Trscv Network Lane <Help> Alarm indicating a TEC Fault on the Client Trscv Network Lane <Condtype> CLIENT_LANE_TEC_FAULT <Probcause> tran… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.2.2.2.120.1.17 |
.1.3.6.1.4.1.20044.69.2.2.2.152
·
1 row entry
·
9 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm20020maAlmclientHostLaneFaultTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm20020ma-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm20020ma-MIB::pm20020maAlmclientHostLaneFaultTable'
List of pm20020maAlmclientHostLaneFault Article
Row definition for the pm20020maAlmclientHostLaneFault
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm20020maAlmclientHostLaneFault
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.69.2.2.2.152.1.1 |
||||
|
Client Frame Alignment Loss :This
OID indicates the module is not aligned with the incoming Client signal <Help> Alarm indicating the module is not aligned with the incoming client signal <Condtype> CLIENT_LOSS_OF… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.2.2.2.152.1.2 |
||||
|
Client Input Loss Of Signal :This
OID indicates a Loss of Signal is detected on the Client Trscv <Help> Alarm indicating a Loss of Signal is detected on the Client Trscv <Condtype> CLIENT_INPUT_LOSS_OF_SIG <Probca… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.2.2.2.152.1.3 |
||||
|
Client Lanes Marker Unlock :This
OID indicates the Client lanes marker alignment is not lock <Help> Alarm indicating the Client lanes marker alignment is not lock <Condtype> CLIENT_LANES_MARKER_UNLOCK <Probcause> … |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.2.2.2.152.1.4 |
||||
|
Client Lanes 64/66b Unlock :This
OID indicates the Client 64/66b decoder is not lock <Help> Alarm indicating the Client 64/66b decoder is not lock <Condtype> CLIENT_LANES_64_66_UNLOCK <Probcause> receiveFailure (41… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.2.2.2.152.1.5 |
||||
|
Client Lanes Not Aligned :This
OID indicates the Client lanes are not aligned <Help> Alarm indicating the Client lanes are not aligned <Condtype> CLIENT_LANES_NOT_ALIGNED <Probcause> receiveFailure (41) <Alarmtype… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.2.2.2.152.1.6 |
||||
|
Client Signal Fail Detected :This
OID indicates that a CSF has been detected on client port in the downstream direction <Help> This alarm indicates if a Client Signal Fail has been detected in the incoming line… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.2.2.2.152.1.7 |
||||
|
Client Host Lane Tx Loss Of Lock
:This OID indicates a Tx Loss of Lock on the Client Trscv Host Lane <Help> Alarm indicating a Tx Loss of Lock on the Client Trscv Host Lane <Condtype> CLIENT_TX_HOST_LOL <Probcause… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.2.2.2.152.1.10 |
||||
|
Client Host Lane Tx FIFO Error
:This OID indicates a Tx FIFO Error on the Client Trscv Host Lane <Help> Alarm indicating a Tx FIFO Error on the Client Trscv Host Lane <Condtype> CLIENT_LANE_TX_FIFO_ERROR <Probcause… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.2.2.2.152.1.11 |
.1.3.6.1.4.1.20044.69.2.2.2.240
·
1 row entry
·
11 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm20020maAlmclientSfpAlmDdmTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm20020ma-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm20020ma-MIB::pm20020maAlmclientSfpAlmDdmTable'
List of pm20020maAlmclientSfpAlmDdm Article
Row definition for the pm20020maAlmclientSfpAlmDdm
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm20020maAlmclientSfpAlmDdm
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.69.2.2.2.240.1.1 |
||||
|
Client Trscv Tx Power Low :This
OID indicates that the Trscv output power of port is lower than the threshold value written in the Trscv EEPROM <Help> Alarm indicating that the Trscv output power of port is lower … |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.2.2.2.240.1.2 |
||||
|
Client Trscv Tx Power High :This
OID indicates that the Trscv output power of port is higher than the threshold value written in the Trscv EEPROM <Help> Alarm indicating that the Trscv output power of port is high… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.2.2.2.240.1.3 |
||||
|
Client Trscv Bias Low :This OID
indicates that the Trscv laser bias current of port is lower than the threshold value written in the Trscv EEPROM <Help> Alarm indicating that the Trscv laser bias current of port i… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.2.2.2.240.1.4 |
||||
|
Client Trscv Bias High :This OID
indicates that the Trscv laser bias current of port is higher than the threshold value written in the Trscv EEPROM <Help> Alarm indicating that the Trscv laser bias current of port… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.2.2.2.240.1.5 |
||||
|
Client Trscv Power Supply Low
:This OID indicates that the Trscv power supply of port is lower than the threshold value written in the Trscv EEPROM <Help> Alarm indicating that the Trscv power supply of port is lo… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.2.2.2.240.1.6 |
||||
|
Client Trscv Power Supply High
:This OID indicates that the Trscv power supply of port is higher than the threshold value written in the Trscv EEPROM <Help> Alarm indicating that the Trscv power supply of port is … |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.2.2.2.240.1.7 |
||||
|
Client Trscv Temp Low :This OID
indicates that the Trscv temperature of port is lower than the threshold value written in the Trscv EEPROM <Help> Alarm indicating that the Trscv temperature of port is lower than t… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.2.2.2.240.1.8 |
||||
|
Client Trscv Temp High :This OID
indicates that the Trscv temperature of port is higher than the threshold value written in the Trscv EEPROM <Help> Alarm indicating that the Trscv temperature of port is higher tha… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.2.2.2.240.1.9 |
||||
|
Client Trscv Rx Power Low :This
OID indicates that the Trscv input power of port is lower than the threshold value written in the Trscv EEPROM <Help> Alarm indicating that the Trscv input power of port is lower th… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.2.2.2.240.1.16 |
||||
|
Client Trscv Rx Power High :This
OID indicates that the Trscv input power of port is higher than the threshold value written in the Trscv EEPROM <Help> Alarm indicating that the Trscv input power of port is higher… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.2.2.2.240.1.17 |
.1.3.6.1.4.1.20044.69.2.2.3.8
·
1 row entry
·
12 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm20020maAlmsynthAlmPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm20020ma-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm20020ma-MIB::pm20020maAlmsynthAlmPortTable'
List of pm20020maAlmsynthAlmPort Article
Row definition for the pm20020maAlmsynthAlmPort
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm20020maAlmsynthAlmPort
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.69.2.2.3.8.1.1 |
||||
|
Client Optical Module Absent :This
OID indicates that the Transceiver is not present in the client port. <Help> This alarm indicates if the client transceiver is not plugged <Condtype> SFP_ABSENT_1 <Probcause> inp… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.2.2.3.8.1.2 |
||||
|
DDM Supported On Client Trscv
:This OID indicates that the Client transceiver supports the Digital Diagnostic Monitoring function <Help> This status indicates if the client transceiver includes the DDM feature <Co… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.2.2.3.8.1.3 |
||||
|
Client HW Fail :This OID indicates
a failure on client port, most probably caused by a HW issue. <Help> This alarm indicates a failure on client port, most probably caused by a HW issue. <Condtype> HW_FAIL_ACC_1 <… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.2.2.3.8.1.5 |
||||
|
Client Trscv Laser Shutdown :This
OID indicates the Client transceiver laser is shutdown <Help> This status indicates if the client transceiver laser is shutdown <Condtype> DW_LSD_1 <Probcause> other (1) <Alarmtype… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.2.2.3.8.1.6 |
||||
|
Local Client Port In Service :This
OID indicates that the local Client port is In Service (1) or Out of Service (2) <Help> This status indicates if the local client port is in service <Condtype> CLIENT_LOCAL_OOS <… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.2.2.3.8.1.7 |
||||
|
Remote Client Port In Service
:This OID indicates that the remote Client port is In Service (1) or Out of Service (2) <Help> This status indicates if the remote client port is in service <Condtype> CLIENT_REMOTE_O… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.2.2.3.8.1.8 |
||||
|
Client AIS Inserted :This OID
indicates a CAIS has been inserted on the output client port. <Help> This status indicates if a Client Alarm Indication Signal is currently inserted on the client interface <Condtype>… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.2.2.3.8.1.9 |
||||
|
Warning On Client Trscv DDM :This
OID indicates a warning is being received from the Client Transceiver DDM <Help> This alarm indicates if a DDM Warning has been detected on the client transceiver <Condtype> SFP_D… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.2.2.3.8.1.10 |
||||
|
Alarm On Client Trscv DDM :This
OID indicates an alarm is being received from the Client Transceiver DDM <Help> This alarm indicates if a DDM Alarm has been detected on the client transceiver <Condtype> SFP_DDM_AL… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.2.2.3.8.1.11 |
||||
|
Client Access Fail :This OID indicates
a failure on the Client port <Help> This alarm indicates a failure on the Client port <Condtype> FAIL_ACC_1 <Probcause> equipmentMalfunction (16) <Alarmtype> synthesisAlarm (… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.2.2.3.8.1.13 |
||||
|
Client Signal Fail Inserted :This
OID indicates a CSF has been inserted in the upstream client port. <Help> This status indicates if a Client Signal Fail is currently inserted on the line signal for this client po… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.2.2.3.8.1.17 |
.1.3.6.1.4.1.20044.69.2.3.1.184
·
1 row entry
·
17 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm20020maAlmlineNetworkLaneAlarmWarning1Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm20020ma-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm20020ma-MIB::pm20020maAlmlineNetworkLaneAlarmWarning1Table'
List of pm20020maAlmlineNetworkLaneAlarmWarning1 Article
Row definition for the pm20020maAlmlineNetworkLaneAlarmWarning1
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm20020maAlmlineNetworkLaneAlarmWarning1
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.69.2.3.1.184.1.1 |
||||
|
Line Trscv Rx Power Low Alarm
:This OID indicates that the Trscv input power is lower than the threshold value written in the Trscv EEPROM <Help> Alarm indicating that the Trscv input power is lower than the thres… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.2.3.1.184.1.2 |
||||
|
Line Trscv Rx Power Low Warning
:This OID indicates that the Trscv input power is lower than the threshold value written in the Trscv EEPROM <Help> Warning indicating that the Trscv input power is lower than the t… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.2.3.1.184.1.3 |
||||
|
Line Trscv Rx Power High Warning
:This OID indicates that the Trscv input power is higher than the threshold value written in the Trscv EEPROM <Help> Warning indicating that the Trscv input power is higher than th… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.2.3.1.184.1.4 |
||||
|
Line Trscv Rx Power High Alarm
:This OID indicates that the Trscv input power is higher than the threshold value written in the Trscv EEPROM <Help> Alarm indicating that the Trscv input power is higher than the th… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.2.3.1.184.1.5 |
||||
|
Line Trscv Tx Laser Temp Low Alarm
:This OID indicates that the Trscv Tx Laser Temperature is lower than the threshold value written in the Trscv EEPROM <Help> Alarm indicating that the Trscv Tx Laser Temperature … |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.2.3.1.184.1.6 |
||||
|
Line Trscv Tx Laser Temp Low Warning
:This OID indicates that the Trscv Tx Laser Temperature is lower than the threshold value written in the Trscv EEPROM <Help> Warning indicating that the Trscv Tx Laser Temperat… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.2.3.1.184.1.7 |
||||
|
Line Trscv Tx Laser Temp High
Warning :This OID indicates that the Trscv Tx Laser Temperature is higher than the threshold value written in the Trscv EEPROM <Help> Warning indicating that the Trscv Tx Laser Temper… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.2.3.1.184.1.8 |
||||
|
Line Trscv Tx Laser Temp High
Alarm :This OID indicates that the Trscv Tx Laser Temperature is higher than the threshold value written in the Trscv EEPROM <Help> Alarm indicating that the Trscv Tx Laser Temperatur… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.2.3.1.184.1.9 |
||||
|
Line Trscv Tx Power Low Alarm
:This OID indicates that the Trscv output power is lower than the threshold value written in the Trscv EEPROM <Help> Alarm indicating that the Trscv output power is lower than the thr… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.2.3.1.184.1.10 |
||||
|
Line Trscv Tx Power Low Warning
:This OID indicates that the Trscv output power is lower than the threshold value written in the Trscv EEPROM <Help> Warning indicating that the Trscv output power is lower than the… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.2.3.1.184.1.11 |
||||
|
Line Trscv Tx Power High Warning
:This OID indicates that the Trscv output power is higher than the threshold value written in the Trscv EEPROM <Help> Warning indicating that the Trscv output power is higher than … |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.2.3.1.184.1.12 |
||||
|
Line Trscv Tx Power High Alarm
:This OID indicates that the Trscv output power is higher than the threshold value written in the Trscv EEPROM <Help> Alarm indicating that the Trscv output power is higher than the … |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.2.3.1.184.1.13 |
||||
|
Line Trscv Tx Bias Low Alarm :This
OID indicates that the Trscv laser bias current is lower than the threshold value written in the Trscv EEPROM <Help> Alarm indicating that the Trscv laser bias current is lower t… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.2.3.1.184.1.14 |
||||
|
Line Trscv Tx Bias Low Warning
:This OID indicates that the Trscv laser bias current is lower than the threshold value written in the Trscv EEPROM <Help> Warning indicating that the Trscv laser bias current is low… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.2.3.1.184.1.15 |
||||
|
Line Trscv Tx Bias High Warning
:This OID indicates that the Trscv laser bias current is higher than the threshold value written in the Trscv EEPROM <Help> Warning indicating that the Trscv laser bias current is h… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.2.3.1.184.1.16 |
||||
|
Line Trscv Tx Bias High Alarm
:This OID indicates that the Trscv laser bias current is higher than the threshold value written in the Trscv EEPROM <Help> Alarm indicating that the Trscv laser bias current is highe… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.2.3.1.184.1.17 |
.1.3.6.1.4.1.20044.69.2.3.1.188
·
1 row entry
·
17 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm20020maAlmlineNetworkLaneAlarmWarning2Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm20020ma-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm20020ma-MIB::pm20020maAlmlineNetworkLaneAlarmWarning2Table'
List of pm20020maAlmlineNetworkLaneAlarmWarning2 Article
Row definition for the pm20020maAlmlineNetworkLaneAlarmWarning2
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm20020maAlmlineNetworkLaneAlarmWarning2
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.69.2.3.1.188.1.1 |
||||
|
Line Trscv Tx Modulator Bias Low
Alarm :This OID indicates that the Trscv Tx modulator bias current is lower than the threshold value written in the Trscv EEPROM <Help> Alarm indicating that the Trscv Tx modulator… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.2.3.1.188.1.2 |
||||
|
Line Trscv Tx Modulator Bias Low
Warning :This OID indicates that the Trscv Tx modulator bias current is lower than the threshold value written in the Trscv EEPROM <Help> Warning indicating that the Trscv Tx modul… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.2.3.1.188.1.3 |
||||
|
Line Trscv Tx Modulator Bias High
Warning :This OID indicates that the Trscv Tx modulator bias current is higher than the threshold value written in the Trscv EEPROM <Help> Warning indicating that the Trscv Tx mod… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.2.3.1.188.1.4 |
||||
|
Line Trscv Tx Modulator Bias High
Alarm :This OID indicates that the Trscv Tx modulator bias current is higher than the threshold value written in the Trscv EEPROM <Help> Alarm indicating that the Trscv Tx modulat… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.2.3.1.188.1.5 |
||||
|
Line Trscv Rx Laser Temp Low Alarm
:This OID indicates that the Trscv Rx Laser Temperature is lower than the threshold value written in the Trscv EEPROM <Help> Alarm indicating that the Trscv Rx Laser Temperature … |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.2.3.1.188.1.6 |
||||
|
Line Trscv Rx Laser Temp Low Warning
:This OID indicates that the Trscv Rx Laser Temperature is lower than the threshold value written in the Trscv EEPROM <Help> Warning indicating that the Trscv Rx Laser Temperat… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.2.3.1.188.1.7 |
||||
|
Line Trscv Rx Laser Temp High
Warning :This OID indicates that the Trscv Rx Laser Temperature is higher than the threshold value written in the Trscv EEPROM <Help> Warning indicating that the Trscv Rx Laser Temper… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.2.3.1.188.1.8 |
||||
|
Line Trscv Rx Laser Temp High
Alarm :This OID indicates that the Trscv Rx Laser Temperature is higher than the threshold value written in the Trscv EEPROM <Help> Alarm indicating that the Trscv Rx Laser Temperatur… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.2.3.1.188.1.9 |
||||
|
Line Trscv Rx Output Power Low
Alarm :This OID indicates that the Trscv Rx output power is lower than the threshold value written in the Trscv EEPROM <Help> Alarm indicating that the Trscv Rx output power is lower… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.2.3.1.188.1.10 |
||||
|
Line Trscv Rx Output Power Low
Warning :This OID indicates that the Trscv Rx output power is lower than the threshold value written in the Trscv EEPROM <Help> Warning indicating that the Trscv Rx output power is l… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.2.3.1.188.1.11 |
||||
|
Line Trscv Rx Output Power High
Warning :This OID indicates that the Trscv Rx output power is higher than the threshold value written in the Trscv EEPROM <Help> Warning indicating that the Trscv Rx output power is… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.2.3.1.188.1.12 |
||||
|
Line Trscv Rx Output Power High
Alarm :This OID indicates that the Trscv Rx output power is higher than the threshold value written in the Trscv EEPROM <Help> Alarm indicating that the Trscv Rx output power is hig… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.2.3.1.188.1.13 |
||||
|
Line Trscv Rx Bias Low Alarm :This
OID indicates that the Trscv Rx laser bias current is lower than the threshold value written in the Trscv EEPROM <Help> Alarm indicating that the Trscv Rx laser bias current is l… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.2.3.1.188.1.14 |
||||
|
Line Trscv Rx Bias Low Warning
:This OID indicates that the Trscv Rx laser bias current is lower than the threshold value written in the Trscv EEPROM <Help> Warning indicating that the Trscv Rx laser bias current … |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.2.3.1.188.1.15 |
||||
|
Line Trscv Rx Bias High Warning
:This OID indicates that the Trscv Rx laser bias current is higher than the threshold value written in the Trscv EEPROM <Help> Warning indicating that the Trscv Rx laser bias curren… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.2.3.1.188.1.16 |
||||
|
Line Trscv Rx Bias High Alarm
:This OID indicates that the Trscv Rx laser bias current is higher than the threshold value written in the Trscv EEPROM <Help> Alarm indicating that the Trscv Rx laser bias current is… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.2.3.1.188.1.17 |
.1.3.6.1.4.1.20044.69.2.3.2.192
·
1 row entry
·
10 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm20020maAlmlineNetworkLaneFaultTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm20020ma-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm20020ma-MIB::pm20020maAlmlineNetworkLaneFaultTable'
List of pm20020maAlmlineNetworkLaneFault Article
Row definition for the pm20020maAlmlineNetworkLaneFault
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm20020maAlmlineNetworkLaneFault
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.69.2.3.2.192.1.1 |
||||
|
Line Network Lane Rx TEC Fault
:This OID indicates a Rx TEC Fault on the Line Trscv Network Lane <Help> Alarm indicating a Rx TEC Fault on the Line Trscv Network Lane <Condtype> LINE_LANE_RX_TEC_FAULT <Probcause> … |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.2.3.2.192.1.3 |
||||
|
Line Network Lane Rx FIFO Error
:This OID indicates a Rx FIFO Error on the Line Trscv Network Lane <Help> Alarm indicating a Rx FIFO Error on the Line Trscv Network Lane <Condtype> LINE_LANE_RX_FIFO_ERROR <Probcau… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.2.3.2.192.1.4 |
||||
|
Line Network Lane Rx Loss Of Lock
:This OID indicates a Rx Loss of Lock on the Line Trscv Network Lane <Help> Alarm indicating a Rx Loss of Lock on the Line Trscv Network Lane <Condtype> LINE_LANE_RX_LOL <Probcaus… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.2.3.2.192.1.5 |
||||
|
Line Network Lane Rx Loss Of Signal
:This OID indicates a Rx Loss of Signal on the Line Trscv Network Lane <Help> Alarm indicating a Rx Loss of Signal on the Line Trscv Network Lane <Condtype> LINE_LANE_RX_LOS <Pr… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.2.3.2.192.1.6 |
||||
|
Line Network Lane Tx Loss Of Lock
:This OID indicates a Tx Loss of Lock on the Line Trscv Network Lane <Help> Alarm indicating a Tx Loss of Lock on the Line Trscv Network Lane <Condtype> LINE_LANE_TX_LOL <Probcaus… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.2.3.2.192.1.8 |
||||
|
Line Network Lane Tx Loss Of Signal
Functionality :This OID indicates a Tx Loss of Signal Functionality on the Line Trscv Network Lane <Help> Alarm indicating a Tx Loss of Signal Functionality on the Line Trscv Ne… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.2.3.2.192.1.9 |
||||
|
Line Network Lane APD Power Supply
:This OID indicates an APD Power supply failure on the Line Trscv Network Lane <Help> Alarm indicating an APD Power supply failure on the Line Trscv Network Lane <Condtype> LINE_… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.2.3.2.192.1.15 |
||||
|
Line Network Lane Wavelength Unlock
:This OID indicates a Wavelength unlock on the Line Trscv Network Lane <Help> Alarm indicating a Wavelength unlock on the Line Trscv Network Lane <Condtype> LINE_LANE_WAVELENGTH… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.2.3.2.192.1.16 |
||||
|
Line Network Lane TEC Fault :This
OID indicates a Tx TEC Fault on the Line Trscv Network Lane <Help> Alarm indicating a Tx TEC Fault on the Line Trscv Network Lane <Condtype> LINE_LANE_TEC_FAULT <Probcause> transm… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.2.3.2.192.1.17 |
.1.3.6.1.4.1.20044.69.2.3.2.196
·
1 row entry
·
9 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm20020maAlmlineHostLaneFaultTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm20020ma-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm20020ma-MIB::pm20020maAlmlineHostLaneFaultTable'
List of pm20020maAlmlineHostLaneFault Article
Row definition for the pm20020maAlmlineHostLaneFault
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm20020maAlmlineHostLaneFault
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.69.2.3.2.196.1.1 |
||||
|
Line Input Loss Of Signal :This
OID indicates a Loss of Signal is detected on the Line Trscv <Help> Alarm indicating a Loss of Signal is detected on the Line Trscv <Condtype> LINE_INPUT_LOSS_OF_SIGNAL <Probcause> … |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.2.3.2.196.1.2 |
||||
|
Line Loss Of Frame :This OID indicates
the module is not aligned with the incoming Line signal <Help> Alarm indicating the module is not aligned with the incoming Line signal <Condtype> LINE_LOSS_OF_FRAME <Probcau… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.2.3.2.196.1.3 |
||||
|
Line SM BDI Inserted :This OID
indicates a SM Backward Defect Indication is inserted on the outgoing Line signal <Help> Status indicating a SM Backward Defect Indication is inserted on the outgoing Line signal <Co… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.2.3.2.196.1.4 |
||||
|
Line SM BDI Detected :This OID
indicates a SM Backward Defect Indication is detected on the incoming Line signal <Help> Alarm indicating a SM Backward Defect Indication is detected on the incoming Line signal <Con… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.2.3.2.196.1.5 |
||||
|
Line SM IAE Inserted :This OID
indicates a SM Incoming Alignment Error is inserted on the outgoing Line signal <Help> Status indicating a SM Incoming Alignment Error is inserted on the outgoing Line signal <Condty… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.2.3.2.196.1.6 |
||||
|
Line SM IAE Detected :This OID
indicates a SM Incoming Alignment Error is detected on the incoming Line signal <Help> Alarm indicating a SM Incoming Alignment Error is detected on the incoming Line signal <Condtyp… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.2.3.2.196.1.7 |
||||
|
Line Host Lane Tx Loss Of Lock
:This OID indicates a Tx Loss of Lock on the Line Trscv Host Lane <Help> Alarm indicating a Tx Loss of Lock on the Line Trscv Host Lane <Condtype> LINE_TX_HOST_LOL <Probcause> receiv… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.2.3.2.196.1.10 |
||||
|
Line Host Lane Tx FIFO Error :This
OID indicates a Tx FIFO Error on the Line Trscv Host Lane <Help> Alarm indicating a Tx FIFO Error on the Line Trscv Host Lane <Condtype> LINE_LANE_TX_FIFO_ERROR <Probcause> recei… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.2.3.2.196.1.11 |
.1.3.6.1.4.1.20044.69.2.3.2.200
·
1 row entry
·
9 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm20020maAlmlineNetworkLaneRxOtnTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm20020ma-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm20020ma-MIB::pm20020maAlmlineNetworkLaneRxOtnTable'
List of pm20020maAlmlineNetworkLaneRxOtn Article
Row definition for the pm20020maAlmlineNetworkLaneRxOtn
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm20020maAlmlineNetworkLaneRxOtn
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.69.2.3.2.200.1.1 |
||||
|
Line Network Rx ODU AIS :This
OID indicates an ODU This OID Indication Signal is detected on the Rx Network interface of the Line Trscv <Help> Alarm indicating an ODU Alarm Indication Signal is detected on the Rx … |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.2.3.2.200.1.10 |
||||
|
Line Network Rx OTU AIS :This
OID indicates an OTU This OID Indication Signal is detected on the Rx Network interface of the Line Trscv <Help> Alarm indicating an OTU Alarm Indication Signal is detected on the Rx … |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.2.3.2.200.1.11 |
||||
|
Line Network Rx SM BDI :This OID
indicates an SM Backward Defect Indication is detected on the Rx Network interface of the Line Trscv <Help> Alarm indicating an SM Backward Defect Indication is detected on the Rx … |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.2.3.2.200.1.12 |
||||
|
Line Network Rx IAE :This OID
indicates an Incoming Alignment Error is detected on the Rx Network interface of the Line Trscv <Help> Alarm indicating an Incoming Alignment Error is detected on the Rx Network inter… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.2.3.2.200.1.13 |
||||
|
Line Network Rx OOM :This OID
indicates an Out of Multiframe is detected on the Rx Network interface of the Line Trscv <Help> Alarm indicating an Out of Multiframe is detected on the Rx Network interface of the Li… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.2.3.2.200.1.14 |
||||
|
Line Network Rx LOM :This OID
indicates a Loss of Multiframe is detected on the Rx Network interface of the Line Trscv <Help> Alarm indicating a Loss of Multiframe is detected on the Rx Network interface of the Li… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.2.3.2.200.1.15 |
||||
|
Line Network Rx OOF :This OID
indicates an Out of Frame is detected on the Rx Network interface of the Line Trscv <Help> Alarm indicating an Out of Frame is detected on the Rx Network interface of the Line Trscv <… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.2.3.2.200.1.16 |
||||
|
Line Network Rx LOF :This OID
indicates a Loss of Frame is detected on the Rx Network interface of the Line Trscv <Help> Alarm indicating a Loss of Frame is detected on the Rx Network interface of the Line Trscv <… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.2.3.2.200.1.17 |
.1.3.6.1.4.1.20044.69.2.3.2.204
·
1 row entry
·
9 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm20020maAlmlineHostLaneTxOtnTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm20020ma-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm20020ma-MIB::pm20020maAlmlineHostLaneTxOtnTable'
List of pm20020maAlmlineHostLaneTxOtn Article
Row definition for the pm20020maAlmlineHostLaneTxOtn
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm20020maAlmlineHostLaneTxOtn
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.69.2.3.2.204.1.1 |
||||
|
Line Host Tx ODU AIS :This OID
indicates an ODU This OID Indication Signal is detected on the Tx Host interface of the Line Trscv <Help> Alarm indicating an ODU Alarm Indication Signal is detected on the Tx Host i… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.2.3.2.204.1.10 |
||||
|
Line Host Tx OTU AIS :This OID
indicates an OTU This OID Indication Signal is detected on the Tx Host interface of the Line Trscv <Help> Alarm indicating an OTU Alarm Indication Signal is detected on the Tx Host i… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.2.3.2.204.1.11 |
||||
|
Line Host Tx SM BDI :This OID
indicates an SM Backward Defect Indication is detected on the Tx Host interface of the Line Trscv <Help> Alarm indicating an SM Backward Defect Indication is detected on the Tx Host i… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.2.3.2.204.1.12 |
||||
|
Line Host Tx IAE :This OID indicates
an Incoming Alignment Error is detected on the Tx Host interface of the Line Trscv <Help> Alarm indicating an Incoming Alignment Error is detected on the Tx Host interface of t… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.2.3.2.204.1.13 |
||||
|
Line Host Tx OOM :This OID indicates
an Out of Multiframe is detected on the Tx Host interface of the Line Trscv <Help> Alarm indicating an Out of Multiframe is detected on the Tx Host interface of the Line Trscv … |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.2.3.2.204.1.14 |
||||
|
Line Host Tx LOM :This OID indicates
a Loss of Multiframe is detected on the Tx Host interface of the Line Trscv <Help> Alarm indicating a Loss of Multiframe is detected on the Tx Host interface of the Line Trscv … |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.2.3.2.204.1.15 |
||||
|
Line Host Tx OOF :This OID indicates
an Out of Frame is detected on the Tx Host interface of the Line Trscv <Help> Alarm indicating an Out of Frame is detected on the Tx Host interface of the Line Trscv <Condtype>… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.2.3.2.204.1.16 |
||||
|
Line Host Tx LOF :This OID indicates
a Loss of Frame is detected on the Tx Host interface of the Line Trscv <Help> Alarm indicating a Loss of Frame is detected on the Tx Host interface of the Line Trscv <Condtype>… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.2.3.2.204.1.17 |
.1.3.6.1.4.1.20044.69.2.3.3.40
·
1 row entry
·
11 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm20020maAlmsynthAlmLineTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm20020ma-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm20020ma-MIB::pm20020maAlmsynthAlmLineTable'
List of pm20020maAlmsynthAlmLine Article
Row definition for the pm20020maAlmsynthAlmLine
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm20020maAlmsynthAlmLine
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.69.2.3.3.40.1.1 |
||||
|
Line Optical Module Absent :This
OID indicates that the line optical interface is not present. <Help> This alarm indicates if the line transceiver is not plugged <Condtype> XFP_ABSENT <Probcause> inputOutputDeviceE… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.2.3.3.40.1.2 |
||||
|
Line Optical Module Ready :This
OID indicates that the optical interface is not operational. <Help> This status indicates if the line transceiver has been correctly initialized <Condtype> XFP_INIT_NOT_COMPL <Probc… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.2.3.3.40.1.3 |
||||
|
Line Port HW Failure :This OID
indicates a failure on line port, most probably caused by a HW issue <Help> This alarm indicates a failure on line port, most probably caused by a HW issue <Condtype> LINE_HW_FAIL <P… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.2.3.3.40.1.5 |
||||
|
Line Trscv Laser Shutdown :This
OID indicates the Line transceiver laser is shutdown <Help> This status indicates if the Line transceiver laser is shutdown <Condtype> XFP_TX_OFF <Probcause> other (1) <Alarmtype> e… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.2.3.3.40.1.6 |
||||
|
Line Port In Service :This OID
indicates that the Line port is In Service (1) of Out or Service (2) <Help> This status indicates if the line port is in service <Condtype> LINE_LOCAL_OOS <Probcause> informationalSt… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.2.3.3.40.1.7 |
||||
|
MS-RDI/L-RDI Inserted On Line
:This OID indicates an upstream MS-RDI/L-RDI has been inserted in the outgoing 10 Gb/s SDH/SONET signal. <Help> This status indicates if a MS-RDI/L-RDI is currently inserted on the li… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.2.3.3.40.1.9 |
||||
|
Warning On Line Optical Module
DDM :This OID indicates a warning is present coming out of Line transceiver DDM <Help> This alarm indicates if a DDM Warning has been detected on the line transceiver <Condtype> LINE… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.2.3.3.40.1.10 |
||||
|
Alarm On Line Optical Module DDM
:This OID indicates an alarm is present coming out of Line transceiver DDM <Help> This alarm indicates if a DDM Alarm has been detected on the line transceiver <Condtype> LINE_DDM_… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.2.3.3.40.1.11 |
||||
|
Line Port Failure :This OID indicates
a failure on the line port <Help> This alarm indicates a failure on the line port <Condtype> LINE_FAIL <Probcause> equipmentMalfunction (16) <Alarmtype> synthesisAlarm (12) <… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.2.3.3.40.1.13 |
||||
|
Line Active :This OID indicates
whether the line is active or standby. <Help> This status indicates whether the line is active or standby. <Condtype> LINE_ACTIVE <Probcause> informationalStatus(1000) <Alarmtype> o… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.2.3.3.40.1.17 |
.1.3.6.1.4.1.20044.69.3.2.16
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm20020maMesrclientNetTxTempTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm20020ma-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm20020ma-MIB::pm20020maMesrclientNetTxTempTable'
List of pm20020maMesrclientNetTxTemp Article
Row definition for the pm20020maMesrclientNetTxTemp
table
table
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the pm20020maMesrclientNetTxTemp
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.69.3.2.16.1.1 |
|
Client Trscv Temperature :This
OID gives the Laser temperature value of the Client Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Temperature = AV/256) (Unit = C) <Help> This Measure gives the Las… |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.20044.69.3.2.16.1.2 |
.1.3.6.1.4.1.20044.69.3.2.48
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm20020maMesrclientNetTxBiasTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm20020ma-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm20020ma-MIB::pm20020maMesrclientNetTxBiasTable'
List of pm20020maMesrclientNetTxBias Article
Row definition for the pm20020maMesrclientNetTxBias
table
table
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the pm20020maMesrclientNetTxBias
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.69.3.2.48.1.1 |
|
Client Trscv Laser Bias :This
OID gives the Laser bias value of the Client Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Bias = AV/500) (Unit = mA) <Help> This Measure gives the Laser bias value … |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.20044.69.3.2.48.1.2 |
.1.3.6.1.4.1.20044.69.3.2.80
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm20020maMesrclientNetTxPwrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm20020ma-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm20020ma-MIB::pm20020maMesrclientNetTxPwrTable'
List of pm20020maMesrclientNetTxPwr Article
Row definition for the pm20020maMesrclientNetTxPwr
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the pm20020maMesrclientNetTxPwr
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.69.3.2.80.1.1 |
|
Client Trscv Tx Power :This OID
gives the transmit power value of the Client Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Power = 10*log(AV)-40) (Unit = dBm) <Help> This Measure gives the transm… |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.20044.69.3.2.80.1.2 |
.1.3.6.1.4.1.20044.69.3.2.112
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm20020maMesrclientNetRxPwrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm20020ma-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm20020ma-MIB::pm20020maMesrclientNetRxPwrTable'
List of pm20020maMesrclientNetRxPwr Article
Row definition for the pm20020maMesrclientNetRxPwr
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the pm20020maMesrclientNetRxPwr
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.69.3.2.112.1.1 |
|
Client Trscv Rx Power :This OID
gives the receive power value of the Client Transceiver, read in the DDM (Digital Diagnostic Monitoring) (Power = 10*log(AV)-40) (Unit = dBm) <Help> This Measure gives the receive p… |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.20044.69.3.2.112.1.2 |
.1.3.6.1.4.1.20044.69.3.3.144
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm20020maMesrlineNetTxLaserOutputPwrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm20020ma-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm20020ma-MIB::pm20020maMesrlineNetTxLaserOutputPwrTable'
List of pm20020maMesrlineNetTxLaserOutputPwr Article
Row definition for the pm20020maMesrlineNetTxLaserOutputPwr
table
table
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the pm20020maMesrlineNetTxLaserOutputPwr
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.69.3.3.144.1.1 |
|
Current Line Trscv Tx Power :This
OID gives the Tx Laser transmit power value of the Line Transceiver, read in the DDM (Digital Diagnostic Monitoring) (Power = AV/100) (Unit = dBm) <Help> This Measure gives the Tx… |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.20044.69.3.3.144.1.2 |
.1.3.6.1.4.1.20044.69.3.3.148
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm20020maMesrlineNetTxLaserTempTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm20020ma-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm20020ma-MIB::pm20020maMesrlineNetTxLaserTempTable'
List of pm20020maMesrlineNetTxLaserTemp Article
Row definition for the pm20020maMesrlineNetTxLaserTemp
table
table
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the pm20020maMesrlineNetTxLaserTemp
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.69.3.3.148.1.1 |
|
Current Line Trscv Tx Laser Temperature
:This OID gives the Tx Laser Temperature value of the Line Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Temperature = AV/256) (Unit = C) <Help> This Measur… |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.20044.69.3.3.148.1.2 |
.1.3.6.1.4.1.20044.69.3.3.152
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm20020maMesrlineNetTxBiasCurrentTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm20020ma-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm20020ma-MIB::pm20020maMesrlineNetTxBiasCurrentTable'
List of pm20020maMesrlineNetTxBiasCurrent Article
Row definition for the pm20020maMesrlineNetTxBiasCurrent
table
table
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the pm20020maMesrlineNetTxBiasCurrent
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.69.3.3.152.1.1 |
|
Current Line Trscv Tx Laser Bias
:This OID gives the Tx Laser Bias value of the Line Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Bias = AV/10) (Unit = mA) <Help> This Measure gives the Tx Laser… |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.20044.69.3.3.152.1.2 |
.1.3.6.1.4.1.20044.69.3.3.156
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm20020maMesrlineNetRxInputPwrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm20020ma-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm20020ma-MIB::pm20020maMesrlineNetRxInputPwrTable'
List of pm20020maMesrlineNetRxInputPwr Article
Row definition for the pm20020maMesrlineNetRxInputPwr
table
table
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the pm20020maMesrlineNetRxInputPwr
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.69.3.3.156.1.1 |
|
Current Line Trscv Rx Power :This
OID gives the Receive power value of the Line Transceiver, read in the DDM (Digital Diagnostic Monitoring) (Power = AV/100) (Unit = dBm) <Help> This Measure gives the Receive powe… |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.20044.69.3.3.156.1.2 |
.1.3.6.1.4.1.20044.69.3.3.160
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm20020maMesrlineResidualChromaticDispTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm20020ma-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm20020ma-MIB::pm20020maMesrlineResidualChromaticDispTable'
List of pm20020maMesrlineResidualChromaticDisp Article
Row definition for the pm20020maMesrlineResidualChromaticDisp
table
table
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the pm20020maMesrlineResidualChromaticDisp
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.69.3.3.160.1.1 |
|
Current Residual Chromatic Dispersion
:This OID gives the current Residual Chromatic Dispersion on the Line interface (Unit = ps/nm)<Help> This measure gives the current Residual Chromatic Dispersion on the Line … |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.20044.69.3.3.160.1.2 |
.1.3.6.1.4.1.20044.69.3.3.164
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm20020maMesrlineDiffGroupDelayTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm20020ma-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm20020ma-MIB::pm20020maMesrlineDiffGroupDelayTable'
List of pm20020maMesrlineDiffGroupDelay Article
Row definition for the pm20020maMesrlineDiffGroupDelay
table
table
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the pm20020maMesrlineDiffGroupDelay
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.69.3.3.164.1.1 |
|
Current Differential Group Delay
:This OID gives the current Differential Group Delay on the Line interface (Unit = ps)<Help> This measure gives the current Differential Group Delay on the Line interface. |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.20044.69.3.3.164.1.2 |
.1.3.6.1.4.1.20044.69.3.3.168
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm20020maMesrlineQFactorTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm20020ma-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm20020ma-MIB::pm20020maMesrlineQFactorTable'
List of pm20020maMesrlineQFactor Article
Row definition for the pm20020maMesrlineQFactor
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the pm20020maMesrlineQFactor
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.69.3.3.168.1.1 |
|
Current Q Factor :This OID gives
the current Q Factor on the Line interface (Unit = dB) <Help> This measure gives the current Q Factor on the Line interface. |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.20044.69.3.3.168.1.2 |
.1.3.6.1.4.1.20044.69.3.3.172
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm20020maMesrlineCarrierFreqOffsetTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm20020ma-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm20020ma-MIB::pm20020maMesrlineCarrierFreqOffsetTable'
List of pm20020maMesrlineCarrierFreqOffset Article
Row definition for the pm20020maMesrlineCarrierFreqOffset
table
table
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the pm20020maMesrlineCarrierFreqOffset
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.69.3.3.172.1.1 |
|
Current Carrier Frequency Offset
:This OID gives the current Carrier Frequency Offset on the Line interface (Unit = Mhz)<Help> This measure gives the current Carrier Frequency Offset on the Line interface. |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.20044.69.3.3.172.1.2 |
.1.3.6.1.4.1.20044.69.3.3.176
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm20020maMesrlineOsnrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm20020ma-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm20020ma-MIB::pm20020maMesrlineOsnrTable'
List of pm20020maMesrlineOsnr Article
Row definition for the pm20020maMesrlineOsnr
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the pm20020maMesrlineOsnr
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.69.3.3.176.1.1 |
|
Current OSNR :This OID gives the
current OSNR on the Line interface (OSNR = AV/10) (Unit = dB)<Help> This measure gives the current OSNR on the Line interface. |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.20044.69.3.3.176.1.2 |
.1.3.6.1.4.1.20044.69.4.2.112
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm20020maCntclientInputErrorCounterTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm20020ma-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm20020ma-MIB::pm20020maCntclientInputErrorCounterTable'
List of pm20020maCntclientInputErrorCounter Article
Row definition for the pm20020maCntclientInputErrorCounter
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm20020maCntclientInputErrorCounter
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.69.4.2.112.1.1 |
||||
|
Client Input Errors :This counter
is increased each time a 10b/8b running disparity error is detected on the Client input stream <Help> This counter gives the number of 10b/8b running disparity errors on the cli… |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.69.4.2.112.1.2 |
||||
|
Client Counter Error :This OID
when set indicates the client error counter value is invalid on Port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.4.2.112.1.3 |
||||
|
Client Counter Overload :This
OID when set indicates a client input error counter overload on Port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.4.2.112.1.4 |
.1.3.6.1.4.1.20044.69.4.2.144
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm20020maCntclientCbipCounterTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm20020ma-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm20020ma-MIB::pm20020maCntclientCbipCounterTable'
List of pm20020maCntclientCbipCounter Article
Row definition for the pm20020maCntclientCbipCounter
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm20020maCntclientCbipCounter
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.69.4.2.144.1.1 |
||||
|
Client Output Errors :This counter
is incremented each time a CBIP parity error is detected on the Client output stream <Help> This counter gives the number of CBIP errors on the client port |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.69.4.2.144.1.2 |
||||
|
Client Counter Error :This OID
when set indicates the CBIP error counter value is invalid on Port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.4.2.144.1.3 |
||||
|
Client CBIP Counter Overload :This
OID when set indicates a CBIP error counter overload on Port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.4.2.144.1.4 |
.1.3.6.1.4.1.20044.69.4.3.192
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm20020maCntlocalLineSmBip8ErrorCounterTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm20020ma-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm20020ma-MIB::pm20020maCntlocalLineSmBip8ErrorCounterTable'
List of pm20020maCntlocalLineSmBip8ErrorCounter Article
Row definition for the pm20020maCntlocalLineSmBip8ErrorCounter
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm20020maCntlocalLineSmBip8ErrorCounter
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.69.4.3.192.1.1 |
||||
|
Uncorrected SD FEC Errors :This
OID gives the current Bit Error Rate (residual SM-BIP8 error) after FEC <Help> This counter gives the current Bit Error Rate (residual SM-BIP8 error) after FEC |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.69.4.3.192.1.2 |
||||
|
Line Counter Error :This OID when
set indicates the B1 error counter value is invalid on Port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.4.3.192.1.3 |
||||
|
Line Counter Overload :This OID
when set indicates a B1 error counter overload on Port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.4.3.192.1.4 |
.1.3.6.1.4.1.20044.69.4.3.193
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm20020maCntlocalLineFecCorrectedErrorsCounterTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm20020ma-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm20020ma-MIB::pm20020maCntlocalLineFecCorrectedErrorsCounterTable'
List of pm20020maCntlocalLineFecCorrectedErrorsCounter Article
Row definition for the pm20020maCntlocalLineFecCorrectedErrorsCounter
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm20020maCntlocalLineFecCorrectedErrorsCounter
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.69.4.3.193.1.1 |
||||
|
Line Input HD FEC Corrected Errors
:This OID gives the current Bit Error Rate before the Hard Decision FEC <Help> This counter gives the current Bit Error Rate before the Hard Decision FEC |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.69.4.3.193.1.2 |
||||
|
FEC Counter Error :This bit when
set indicates the FEC corrected errors counter value is invalid on Line |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.4.3.193.1.3 |
||||
|
FEC Counter Overload :This bit
when set indicates a FEC corrected errors counter overload on Line |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.4.3.193.1.4 |
.1.3.6.1.4.1.20044.69.4.3.194
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm20020maCntremoteLineSmBip8ErrorCounterTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm20020ma-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm20020ma-MIB::pm20020maCntremoteLineSmBip8ErrorCounterTable'
List of pm20020maCntremoteLineSmBip8ErrorCounter Article
Row definition for the pm20020maCntremoteLineSmBip8ErrorCounter
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm20020maCntremoteLineSmBip8ErrorCounter
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.69.4.3.194.1.1 |
||||
|
Remote SM BIP8 :This OID gives
the current Bit Error Rate (residual SM-BIP8 error) after FEC on the remote side <Help> This counter gives the current Bit Error Rate (residual SM-BIP8 error) after FEC on the remot… |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.69.4.3.194.1.2 |
||||
|
Remote Counter Error :
|
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.4.3.194.1.3 |
||||
|
Remote Counter Overload :
|
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.4.3.194.1.4 |
.1.3.6.1.4.1.20044.69.4.3.195
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm20020maCntlineDfrmTimCntTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm20020ma-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm20020ma-MIB::pm20020maCntlineDfrmTimCntTable'
List of pm20020maCntlineDfrmTimCnt Article
Row definition for the pm20020maCntlineDfrmTimCnt
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm20020maCntlineDfrmTimCnt
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.69.4.3.195.1.1 |
||||
|
Line Timer Counter :
|
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.69.4.3.195.1.2 |
||||
|
Line Counter Error :This OID when
set indicates the deframer timer counter value is invalid on Port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.4.3.195.1.3 |
||||
|
Line Counter Overload :This OID
when set indicates a deframer timer counter overload on Port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.4.3.195.1.4 |
.1.3.6.1.4.1.20044.69.4.3.196
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm20020maCntlocalLineTrscvPreSdFecErrorCounterTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm20020ma-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm20020ma-MIB::pm20020maCntlocalLineTrscvPreSdFecErrorCounterTable'
List of pm20020maCntlocalLineTrscvPreSdFecErrorCounter Article
Row definition for the pm20020maCntlocalLineTrscvPreSdFecErrorCounter
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm20020maCntlocalLineTrscvPreSdFecErrorCounter
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.69.4.3.196.1.1 |
||||
|
Pre-SD FEC Errors :This OID gives
the current Bit Error Rate before the Soft Decision FEC <Help> This counter gives the current Bit Error Rate before the Soft Decision FEC |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.69.4.3.196.1.2 |
||||
|
Line Counter Error :This OID when
set indicates the deframer timer counter value is invalid on Port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.4.3.196.1.3 |
||||
|
Line Counter Overload :This OID
when set indicates a deframer timer counter overload on Port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.4.3.196.1.4 |
.1.3.6.1.4.1.20044.69.4.3.197
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm20020maCntlocalLineTrscvUncorrectedSdFecErrorCounterTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm20020ma-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm20020ma-MIB::pm20020maCntlocalLineTrscvUncorrectedSdFecErrorCounterTable'
List of pm20020maCntlocalLineTrscvUncorrectedSdFecErrorCounter Article
Row definition for the pm20020maCntlocalLineTrscvUncorrectedSdFecErrorCounter
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm20020maCntlocalLineTrscvUncorrectedSdFecErrorCounter
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.69.4.3.197.1.1 |
||||
|
Uncorrected SD FEC Errors :This
OID gives the current Bit Error Rate after the Soft Decision FEC (residual) <Help> This counter gives the current Bit Error Rate after the Soft Decision FEC (residual) |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.69.4.3.197.1.2 |
||||
|
Line Counter Error :This OID when
set indicates the deframer timer counter value is invalid on Port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.4.3.197.1.3 |
||||
|
Line Counter Overload :This OID
when set indicates a deframer timer counter overload on Port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.4.3.197.1.4 |
.1.3.6.1.4.1.20044.69.4.3.198
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm20020maCntlocalLineTrscvPreSdFecBitCounterTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm20020ma-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm20020ma-MIB::pm20020maCntlocalLineTrscvPreSdFecBitCounterTable'
List of pm20020maCntlocalLineTrscvPreSdFecBitCounter Article
Row definition for the pm20020maCntlocalLineTrscvPreSdFecBitCounter
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm20020maCntlocalLineTrscvPreSdFecBitCounter
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.69.4.3.198.1.1 |
||||
|
Pre-SD FEC Bit Counter :This OID
gives the current Bit count before the Soft Decision FEC <Help> This counter gives the current Bit Count before the Soft Decision FEC |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.69.4.3.198.1.2 |
||||
|
Line Counter Error :This OID when
set indicates the deframer timer counter value is invalid on Port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.4.3.198.1.3 |
||||
|
Line Counter Overload :This OID
when set indicates a deframer timer counter overload on Port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.4.3.198.1.4 |
.1.3.6.1.4.1.20044.69.4.3.199
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm20020maCntlocalLineTrscvUncorrectedSdFecBitCounterTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm20020ma-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm20020ma-MIB::pm20020maCntlocalLineTrscvUncorrectedSdFecBitCounterTable'
List of pm20020maCntlocalLineTrscvUncorrectedSdFecBitCounter Article
Row definition for the pm20020maCntlocalLineTrscvUncorrectedSdFecBitCounter
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm20020maCntlocalLineTrscvUncorrectedSdFecBitCounter
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.69.4.3.199.1.1 |
||||
|
Uncorrected SD FEC Bit Counter
:This OID gives the current Bit count after the Soft Decision FEC (residual) <Help> This counter gives the current Bit Count after the Soft Decision FEC (residual) |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.69.4.3.199.1.2 |
||||
|
Line Counter Error :This OID when
set indicates the deframer timer counter value is invalid on Port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.4.3.199.1.3 |
||||
|
Line Counter Overload :This OID
when set indicates a deframer timer counter overload on Port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.4.3.199.1.4 |
.1.3.6.1.4.1.20044.69.6.2.16
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm20020maCtrlaccessLoopTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm20020ma-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm20020ma-MIB::pm20020maCtrlaccessLoopTable'
List of pm20020maCtrlaccessLoop Article
Row definition for the pm20020maCtrlaccessLoop
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm20020maCtrlaccessLoop
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.69.6.2.16.1.1 |
||||
|
Client Facility Loopback :This
OID, when set at '1' puts the client port in loopback, looping the received 10 Gb/s signal on the transmit 10 Gb/s output. <Help> This control enables the Out Loopback on the client… |
EKINOPS-MIBEkiStater/w Type Values:
|
.1.3.6.1.4.1.20044.69.6.2.16.1.2 |
.1.3.6.1.4.1.20044.69.6.2.17
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm20020maCtrlclientLoopToLineTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm20020ma-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm20020ma-MIB::pm20020maCtrlclientLoopToLineTable'
List of pm20020maCtrlclientLoopToLine Article
Row definition for the pm20020maCtrlclientLoopToLine
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm20020maCtrlclientLoopToLine
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.69.6.2.17.1.1 |
||||
|
Client Terminal Loopback :This
OID, when set, puts the client port in loop back, looping the 10 Gb/s output signal on the 10 Gb/s input.<Help> This control enables the In Loopback on the client port, looping the c… |
EKINOPS-MIBEkiStater/w Type Values:
|
.1.3.6.1.4.1.20044.69.6.2.17.1.2 |
.1.3.6.1.4.1.20044.69.6.2.21
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm20020maCtrlcsfUpInsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm20020ma-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm20020ma-MIB::pm20020maCtrlcsfUpInsTable'
List of pm20020maCtrlcsfUpIns Article
Row definition for the pm20020maCtrlcsfUpIns
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm20020maCtrlcsfUpIns
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.69.6.2.21.1.1 |
||||
|
Client Signal Fail Insertion :This
OID, when set, inserts a client signal fail in the upstream client Port. <Help> This control inserts a Client Signal Fail for the client port |
EKINOPS-MIBEkiStater/w Type Values:
|
.1.3.6.1.4.1.20044.69.6.2.21.1.2 |
.1.3.6.1.4.1.20044.69.6.2.22
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm20020maCtrlcaisDwInsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm20020ma-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm20020ma-MIB::pm20020maCtrlcaisDwInsTable'
List of pm20020maCtrlcaisDwIns Article
Row definition for the pm20020maCtrlcaisDwIns
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm20020maCtrlcaisDwIns
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.69.6.2.22.1.1 |
||||
|
Client AIS Insertion :This OID,
when set, inserts a client AIS on the downstream client Port. <Help> This control inserts a Client AIS for the client port |
EKINOPS-MIBEkiStater/w Type Values:
|
.1.3.6.1.4.1.20044.69.6.2.22.1.2 |
.1.3.6.1.4.1.20044.69.6.2.262
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm20020maCtrlclientResetAllCountTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm20020ma-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm20020ma-MIB::pm20020maCtrlclientResetAllCountTable'
List of pm20020maCtrlclientResetAllCount Article
Row definition for the pm20020maCtrlclientResetAllCount
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm20020maCtrlclientResetAllCount
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.69.6.2.262.1.1 |
||||
|
Client Counters Reset :This OID
resets every counter on the client port <Help> This control operates a reset on the statistics current ,previous and history client port counters |
EKINOPS-MIBEkiStater/w Type Values:
|
.1.3.6.1.4.1.20044.69.6.2.262.1.2 |
.1.3.6.1.4.1.20044.69.6.3.64
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm20020maCtrlcommAccessLoopTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm20020ma-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm20020ma-MIB::pm20020maCtrlcommAccessLoopTable'
List of pm20020maCtrlcommAccessLoop Article
Row definition for the pm20020maCtrlcommAccessLoop
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm20020maCtrlcommAccessLoop
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.69.6.3.64.1.1 |
||||
|
Line Terminal Loopback :This OID,
when set, puts the module in common access loop back, looping the 200 Gb/s output signal on the 200 Gb/s input.<Help> This control enables the In Loopback on the line port, loopin… |
EKINOPS-MIBEkiStater/w Type Values:
|
.1.3.6.1.4.1.20044.69.6.3.64.1.2 |
.1.3.6.1.4.1.20044.69.6.3.66
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm20020maCtrllineLoopTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm20020ma-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm20020ma-MIB::pm20020maCtrllineLoopTable'
List of pm20020maCtrllineLoop Article
Row definition for the pm20020maCtrllineLoop
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm20020maCtrllineLoop
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.69.6.3.66.1.1 |
||||
|
Line Facility Loopback :This OID,
when set at '1' puts the module in line loopback mode, looping the received 200 Gb/s signal on the transmit 200 Gb/s output. The Upstream part of the module is timed on the 200 Gb… |
EKINOPS-MIBEkiStater/w Type Values:
|
.1.3.6.1.4.1.20044.69.6.3.66.1.2 |
.1.3.6.1.4.1.20044.69.6.3.69
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm20020maCtrlfecDisableTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm20020ma-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm20020ma-MIB::pm20020maCtrlfecDisableTable'
List of pm20020maCtrlfecDisable Article
Row definition for the pm20020maCtrlfecDisable
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm20020maCtrlfecDisable
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.69.6.3.69.1.1 |
||||
|
Forward Error Correction Inhibition
:This OID, when set, inhibits the Forward Error Correction feature on the line input <Help> This control enables/disables the Forward Error Correction on the line interface |
EKINOPS-MIBEkiStater/w Type Values:
|
.1.3.6.1.4.1.20044.69.6.3.69.1.2 |
.1.3.6.1.4.1.20044.69.6.3.209
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm20020maCtrlmsaLineLoopTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm20020ma-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm20020ma-MIB::pm20020maCtrlmsaLineLoopTable'
List of pm20020maCtrlmsaLineLoop Article
Row definition for the pm20020maCtrlmsaLineLoop
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm20020maCtrlmsaLineLoop
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.69.6.3.209.1.1 |
||||
|
MSA Line Loop :This OID operates
a line loopback on the MSA Line <Help> This control defines the line loop back of the line transceiver |
EKINOPS-MIBEkiStater/w Type Values:
|
.1.3.6.1.4.1.20044.69.6.3.209.1.2 |
.1.3.6.1.4.1.20044.69.6.3.210
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm20020maCtrlmsaTxResetTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm20020ma-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm20020ma-MIB::pm20020maCtrlmsaTxResetTable'
List of pm20020maCtrlmsaTxReset Article
Row definition for the pm20020maCtrlmsaTxReset
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm20020maCtrlmsaTxReset
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.69.6.3.210.1.1 |
||||
|
Line MSA TX Reset :This OID resets
the TX portion of the MSA line module <Help > This control initiates a reset of the transmitting side |
EKINOPS-MIBEkiStater/w Type Values:
|
.1.3.6.1.4.1.20044.69.6.3.210.1.2 |
.1.3.6.1.4.1.20044.69.6.3.211
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm20020maCtrlmsaRxResetTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm20020ma-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm20020ma-MIB::pm20020maCtrlmsaRxResetTable'
List of pm20020maCtrlmsaRxReset Article
Row definition for the pm20020maCtrlmsaRxReset
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm20020maCtrlmsaRxReset
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.69.6.3.211.1.1 |
||||
|
Line MSA RX Reset :This OID resets
the RX portion of the MSA line module <Help > This control initiates a reset of the receiving side |
EKINOPS-MIBEkiStater/w Type Values:
|
.1.3.6.1.4.1.20044.69.6.3.211.1.2 |
.1.3.6.1.4.1.20044.69.6.3.212
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm20020maCtrlmsaShutdownTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm20020ma-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm20020ma-MIB::pm20020maCtrlmsaShutdownTable'
List of pm20020maCtrlmsaShutdown Article
Row definition for the pm20020maCtrlmsaShutdown
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm20020maCtrlmsaShutdown
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.69.6.3.212.1.1 |
||||
|
Line MSA Shutdown :This OID enters
a process to shutdown the MSA line module <Help > This control initiates a shutdown of the module |
EKINOPS-MIBEkiStater/w Type Values:
|
.1.3.6.1.4.1.20044.69.6.3.212.1.2 |
.1.3.6.1.4.1.20044.69.6.3.263
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm20020maCtrllineResetAllCountTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm20020ma-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm20020ma-MIB::pm20020maCtrllineResetAllCountTable'
List of pm20020maCtrllineResetAllCount Article
Row definition for the pm20020maCtrllineResetAllCount
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm20020maCtrllineResetAllCount
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.69.6.3.263.1.1 |
||||
|
Line Counters Reset :This OID
resets every counter on the line port <Help> This control operates a reset on the statistics current ,previous and history line port counters |
EKINOPS-MIBEkiStater/w Type Values:
|
.1.3.6.1.4.1.20044.69.6.3.263.1.2 |
pm20020maRinvSfpTable
table.1.3.6.1.4.1.20044.69.7.1.1
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm20020maRinvSfpTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm20020ma-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm20020ma-MIB::pm20020maRinvSfpTable'
List of the SFPs on the selected module
Row definition for the SFP table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index for SFP table
|
Integer32 Constraints: range: 1-16 |
.1.3.6.1.4.1.20044.69.7.1.1.1.1 |
|
Inventory for the SFP: This OID contains the inventory for the SFP
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.20044.69.7.1.1.1.2 |
pm20020maRinvLineTable
table.1.3.6.1.4.1.20044.69.7.1.2
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm20020maRinvLineTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm20020ma-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm20020ma-MIB::pm20020maRinvLineTable'
List of the XFPs on the selected module
Row definition for the XFP table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index for XFP table
|
Integer32 Constraints: range: 1-16 |
.1.3.6.1.4.1.20044.69.7.1.2.1.1 |
|
Inventory for the XFP: This OID contains the inventory for the XFP
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.20044.69.7.1.2.1.2 |
.1.3.6.1.4.1.20044.69.9.1.1
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm20020maCfgClientcaiscsfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm20020ma-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm20020ma-MIB::pm20020maCfgClientcaiscsfTable'
List of Article
Row definition for the accessCAisCsf
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the clientcaiscsf
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.69.9.1.1.1.1 |
|
CAIS mode on Client Port :This
register enables/disables port laser shutdown on CAIS insertion condition |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.69.9.1.1.1.3 |
.1.3.6.1.4.1.20044.69.9.2.1
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm20020maCfgClientStartupTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm20020ma-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm20020ma-MIB::pm20020maCfgClientStartupTable'
List of Article
Row definition for the startup
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the clientStartup
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.69.9.2.1.1.1 |
|
Default Settings on Client Port
:This register configures the default initialisation settings on the port. |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.69.9.2.1.1.3 |
|
Default Settings on Client Port
:This register configures the default initialisation settings on the port. |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.69.9.2.1.1.4 |
|
Default Options on Client Port
:This register configures the default options on the port. |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.69.9.2.1.1.14 |
.1.3.6.1.4.1.20044.69.9.2.2
·
1 row entry
·
3 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm20020maCfgLineStartupTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm20020ma-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm20020ma-MIB::pm20020maCfgLineStartupTable'
List of Article
Row definition for the startup
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the lineStartup
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.69.9.2.2.1.1 |
|
Default Settings on Line :This
register configures the default initialisation settings on Line |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.69.9.2.2.1.3 |
|
Default Options on Line :This
register configures the default options on the line |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.69.9.2.2.1.14 |
pm20020maCfgXfpTable
table.1.3.6.1.4.1.20044.69.9.2.3
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm20020maCfgXfpTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm20020ma-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm20020ma-MIB::pm20020maCfgXfpTable'
List of Article
Row definition for the startup
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the xfp table
|
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.69.9.2.3.1.1 |
|
Default settings on MSA :This
register configures the default initialisation settings on MSA |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.69.9.2.3.1.3 |
.1.3.6.1.4.1.20044.69.9.3.1
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm20020maCfgLabelclientTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm20020ma-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm20020ma-MIB::pm20020maCfgLabelclientTable'
List of Article
Row definition for the labels
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the labelclient
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.69.9.3.1.1.1 |
|
Default settings on the label
of the Ports :These registers configures the default initialisation settings of the labels of the ports. |
SNMPv2-TCDisplayStringr/w Constraints: range: 1-16Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.20044.69.9.3.1.1.3 |
.1.3.6.1.4.1.20044.69.9.3.2
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm20020maCfgLabellineTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm20020ma-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm20020ma-MIB::pm20020maCfgLabellineTable'
List of Article
Row definition for the labels
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the labelline
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.69.9.3.2.1.1 |
|
Default settings on the label
of the lines :These registers configures the default initialisation settings of the labels of the lines. |
SNMPv2-TCDisplayStringr/w Constraints: range: 1-16Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.20044.69.9.3.2.1.3 |
pm20020maCfgOtxtlhTable
table.1.3.6.1.4.1.20044.69.9.4.1
·
1 row entry
·
6 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm20020maCfgOtxtlhTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm20020ma-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm20020ma-MIB::pm20020maCfgOtxtlhTable'
List of Article
Row definition for the startuptlh
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the otxtlh
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.69.9.4.1.1.1 |
|
Defaut Line output Power :This
register configures the start-up output power of the Line tranceiver (Unit = dBm) |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.69.9.4.1.1.6 |
|
Default Line transceiver Tx Channel
:This register configures the start-up laser channel of the Line Tx transceiver |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.69.9.4.1.1.7 |
|
Default Line transceiver Grid
:This register configures the start-up laser grid of the Line transceiver |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.69.9.4.1.1.8 |
|
Default Line TRX lowest Freq :This
register configures the start-up lowest frequency of the Line transceiver |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.69.9.4.1.1.9 |
|
Default Line transceiver Rx Channel
:This register configures the start-up laser channel of the Line Rx transceiver |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.69.9.4.1.1.10 |
.1.3.6.1.4.1.20044.69.9.6.1
·
1 row entry
·
6 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm20020maCfgOtxtlhcapabilitiesTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm20020ma-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm20020ma-MIB::pm20020maCfgOtxtlhcapabilitiesTable'
List of Article
Row definition for the startuptablefive
table
table
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the otxtlhcapabilities
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.69.9.6.1.1.1 |
|
Component parameters :This OID
defines the component parameters |
Unsigned32 Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.69.9.6.1.1.3 |
|
Miscellaneous default settings
:This OID defines the miscellaneous parameters |
Unsigned32 Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.69.9.6.1.1.4 |
|
Number of the first channel of
the component :This OID defines the first channel number of the PM |
Unsigned32 Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.69.9.6.1.1.5 |
|
Number of the last channel of
the component :This OID defines the last channel number of the PM |
Unsigned32 Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.69.9.6.1.1.6 |
|
Grid value of the component :This
OID defines the grid of the PM |
Unsigned32 Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.69.9.6.1.1.7 |
.1.3.6.1.4.1.20044.69.11.2.4.16
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm20020maMonupRmonBytesCounterClientInputTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm20020ma-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm20020ma-MIB::pm20020maMonupRmonBytesCounterClientInputTable'
List of pm20020maMonupRmonBytesCounterClientInput Article
Row definition for the pm20020maMonupRmonBytesCounterClientInput
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm20020maMonupRmonBytesCounterClientInput
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.69.11.2.4.16.1.1 |
||||
|
Client Input Bytes :This counter
is increased each time a data byte is received on the client port <Help> This counter gives the number of bytes received on the client port |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.69.11.2.4.16.1.2 |
||||
|
Bytes Counter Error :This OID
when set indicates the Bytes counter value is invalid on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.11.2.4.16.1.3 |
||||
|
Bytes Counter Overload :This OID
when set indicates a Bytes counter overload on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.11.2.4.16.1.4 |
.1.3.6.1.4.1.20044.69.11.2.4.48
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm20020maMonupRmonCrcErrorsCounterClientInputTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm20020ma-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm20020ma-MIB::pm20020maMonupRmonCrcErrorsCounterClientInputTable'
List of pm20020maMonupRmonCrcErrorsCounterClientInput Article
Row definition for the pm20020maMonupRmonCrcErrorsCounterClientInput
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm20020maMonupRmonCrcErrorsCounterClientInput
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.69.11.2.4.48.1.1 |
||||
|
Client Input CRC Errors :This
counter is increased each time a CRC error is detected on the client port<Help> This counter gives the number of CRC Errors received on the client port |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.69.11.2.4.48.1.2 |
||||
|
CRC Errors Counter Error :This
OID when set indicates the CRC Errors counter value is invalid on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.11.2.4.48.1.3 |
||||
|
CRC Errors Counter Overload :This
OID when set indicates a CRC Errors counter overload on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.11.2.4.48.1.4 |
.1.3.6.1.4.1.20044.69.11.2.4.80
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm20020maMonupRmonPacketsCounterClientInputTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm20020ma-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm20020ma-MIB::pm20020maMonupRmonPacketsCounterClientInputTable'
List of pm20020maMonupRmonPacketsCounterClientInput Article
Row definition for the pm20020maMonupRmonPacketsCounterClientInput
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm20020maMonupRmonPacketsCounterClientInput
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.69.11.2.4.80.1.1 |
||||
|
Client Input Packets :This counter
is increased each time a packet is received on the client port <Help> This counter gives the number of packets received on the client port |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.69.11.2.4.80.1.2 |
||||
|
Packets Counter Error :This OID
when set indicates the Packets counter value is invalid on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.11.2.4.80.1.3 |
||||
|
Packets Counter Overload :This
OID when set indicates a Packets counter overload on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.11.2.4.80.1.4 |
.1.3.6.1.4.1.20044.69.11.2.4.112
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm20020maMonupRmonBroadcastCounterClientInputTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm20020ma-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm20020ma-MIB::pm20020maMonupRmonBroadcastCounterClientInputTable'
List of pm20020maMonupRmonBroadcastCounterClientInput Article
Row definition for the pm20020maMonupRmonBroadcastCounterClientInput
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm20020maMonupRmonBroadcastCounterClientInput
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.69.11.2.4.112.1.1 |
||||
|
Client Input Broadcast Packets
:This counter is increased each time a broadcast packet is received on the client port <Help> This counter gives the number of Broadcast packets received on the client port |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.69.11.2.4.112.1.2 |
||||
|
Broadcast Counter Error :This
OID when set indicates the Broadcast counter value is invalid on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.11.2.4.112.1.3 |
||||
|
Broadcast Counter Overload :This
OID when set indicates a Broadcast counter overload on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.11.2.4.112.1.4 |
.1.3.6.1.4.1.20044.69.11.2.4.144
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm20020maMonupRmonMulticastCounterClientInputTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm20020ma-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm20020ma-MIB::pm20020maMonupRmonMulticastCounterClientInputTable'
List of pm20020maMonupRmonMulticastCounterClientInput Article
Row definition for the pm20020maMonupRmonMulticastCounterClientInput
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm20020maMonupRmonMulticastCounterClientInput
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.69.11.2.4.144.1.1 |
||||
|
Client Input Multicast Packets
:This counter is increased each time a Multicast packet is received on the client port <Help> This counter gives the number of Multicast packets received on the client port |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.69.11.2.4.144.1.2 |
||||
|
Multicast Counter Error :This
OID when set indicates the Multicast counter value is invalid on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.11.2.4.144.1.3 |
||||
|
Multicast Counter Overload :This
OID when set indicates a Multicast counter overload on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.11.2.4.144.1.4 |
.1.3.6.1.4.1.20044.69.11.2.4.176
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm20020maMonupRmonPauseFrameCounterClientInputTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm20020ma-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm20020ma-MIB::pm20020maMonupRmonPauseFrameCounterClientInputTable'
List of pm20020maMonupRmonPauseFrameCounterClientInput Article
Row definition for the pm20020maMonupRmonPauseFrameCounterClientInput
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm20020maMonupRmonPauseFrameCounterClientInput
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.69.11.2.4.176.1.1 |
||||
|
Client Input Pause Frames :This
counter is increased each time a Pause frame is received on the client port <Help> This counter gives the number of Pause frames received on the client port |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.69.11.2.4.176.1.2 |
||||
|
Pause Counter Error :This OID
when set indicates the Pause counter value is invalid on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.11.2.4.176.1.3 |
||||
|
Pause Counter Overload :This OID
when set indicates a Pause counter overload on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.11.2.4.176.1.4 |
.1.3.6.1.4.1.20044.69.11.2.4.304
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm20020maMonupRmonUnicastCounterClientInputTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm20020ma-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm20020ma-MIB::pm20020maMonupRmonUnicastCounterClientInputTable'
List of pm20020maMonupRmonUnicastCounterClientInput Article
Row definition for the pm20020maMonupRmonUnicastCounterClientInput
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm20020maMonupRmonUnicastCounterClientInput
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.69.11.2.4.304.1.1 |
||||
|
Client Input Unicast Packets :This
counter is increased each time a Unicast packet is received on the client port <Help> This counter gives the number of Unicast packets received on the client port |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.69.11.2.4.304.1.2 |
||||
|
Unicast Counter Error :This OID
when set indicates the Unicast counter value is invalid on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.11.2.4.304.1.3 |
||||
|
Unicast Counter Overload :This
OID when set indicates a Unicast counter overload on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.11.2.4.304.1.4 |
.1.3.6.1.4.1.20044.69.11.2.4.336
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm20020maMonupRmonNonunicastCounterClientInputTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm20020ma-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm20020ma-MIB::pm20020maMonupRmonNonunicastCounterClientInputTable'
List of pm20020maMonupRmonNonunicastCounterClientInput Article
Row definition for the pm20020maMonupRmonNonunicastCounterClientInput
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm20020maMonupRmonNonunicastCounterClientInput
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.69.11.2.4.336.1.1 |
||||
|
Client Input Non Unicast Packets
:This counter is increased each time a Non-Unicast packet is received on the client port <Help> This counter gives the number of Non-Unicast packets received on the client port |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.69.11.2.4.336.1.2 |
||||
|
Non Unicast Counter Error :This
OID when set indicates the Non-Unicast counter value is invalid on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.11.2.4.336.1.3 |
||||
|
Non Unicast Counter Overload :This
OID when set indicates a Non-Unicast counter overload on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.11.2.4.336.1.4 |
.1.3.6.1.4.1.20044.69.11.2.4.400
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm20020maMondownRmonBytesCounterClientOutputTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm20020ma-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm20020ma-MIB::pm20020maMondownRmonBytesCounterClientOutputTable'
List of pm20020maMondownRmonBytesCounterClientOutput Article
Row definition for the pm20020maMondownRmonBytesCounterClientOutput
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm20020maMondownRmonBytesCounterClientOutput
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.69.11.2.4.400.1.1 |
||||
|
Client Output Bytes :This counter
is increased each time a data byte is transmitted on the client port <Help> This counter gives the number of bytes transmitted on the client port |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.69.11.2.4.400.1.2 |
||||
|
Bytes Counter Error :This OID
when set indicates the Bytes counter value is invalid on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.11.2.4.400.1.3 |
||||
|
Bytes Counter Overload :This OID
when set indicates a Bytes counter overload on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.11.2.4.400.1.4 |
.1.3.6.1.4.1.20044.69.11.2.4.432
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm20020maMondownRmonCrcErrorsCounterClientOutputTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm20020ma-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm20020ma-MIB::pm20020maMondownRmonCrcErrorsCounterClientOutputTable'
List of pm20020maMondownRmonCrcErrorsCounterClientOutput Article
Row definition for the pm20020maMondownRmonCrcErrorsCounterClientOutput
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm20020maMondownRmonCrcErrorsCounterClientOutput
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.69.11.2.4.432.1.1 |
||||
|
Client Output CRC Errors :This
counter is increased each time a CRC error is detected on the transmit client port <Help> This counter gives the number of CRC Errors transmitted on the client port |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.69.11.2.4.432.1.2 |
||||
|
CRC Errors Counter Error :This
OID when set indicates the CRC Errors counter value is invalid on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.11.2.4.432.1.3 |
||||
|
CRC Errors Counter Overload :This
OID when set indicates a CRC Errors counter overload on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.11.2.4.432.1.4 |
.1.3.6.1.4.1.20044.69.11.2.4.464
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm20020maMondownRmonPacketsCounterClientOutputTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm20020ma-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm20020ma-MIB::pm20020maMondownRmonPacketsCounterClientOutputTable'
List of pm20020maMondownRmonPacketsCounterClientOutput Article
Row definition for the pm20020maMondownRmonPacketsCounterClientOutput
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm20020maMondownRmonPacketsCounterClientOutput
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.69.11.2.4.464.1.1 |
||||
|
Client Output Packets :This counter
is increased each time a packet is transmitted on the client port <Help> This counter gives the number of packets transmitted on the client port |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.69.11.2.4.464.1.2 |
||||
|
Packets Counter Error :This OID
when set indicates the Packets counter value is invalid on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.11.2.4.464.1.3 |
||||
|
Packets Counter Overload :This
OID when set indicates a Packets counter overload on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.11.2.4.464.1.4 |
.1.3.6.1.4.1.20044.69.11.2.4.496
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm20020maMondownRmonBroadcastCounterClientOutputTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm20020ma-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm20020ma-MIB::pm20020maMondownRmonBroadcastCounterClientOutputTable'
List of pm20020maMondownRmonBroadcastCounterClientOutput Article
Row definition for the pm20020maMondownRmonBroadcastCounterClientOutput
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm20020maMondownRmonBroadcastCounterClientOutput
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.69.11.2.4.496.1.1 |
||||
|
Client Output Broadcast Packets
:This counter is increased each time a broadcast packet is transmitted on the client port <Help> This counter gives the number of Broadcast packets transmitted on the client port |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.69.11.2.4.496.1.2 |
||||
|
Broadcast Counter Error :This
OID when set indicates the Broadcast counter value is invalid on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.11.2.4.496.1.3 |
||||
|
Broadcast Counter Overload :This
OID when set indicates a Broadcast counter overload on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.11.2.4.496.1.4 |
.1.3.6.1.4.1.20044.69.11.2.4.528
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm20020maMondownRmonMulticastCounterClientOutputTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm20020ma-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm20020ma-MIB::pm20020maMondownRmonMulticastCounterClientOutputTable'
List of pm20020maMondownRmonMulticastCounterClientOutput Article
Row definition for the pm20020maMondownRmonMulticastCounterClientOutput
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm20020maMondownRmonMulticastCounterClientOutput
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.69.11.2.4.528.1.1 |
||||
|
Client Output Multicast Packets
:This counter is increased each time a Multicast packet is transmitted on the client port <Help> This counter gives the number of Multicast packets transmitted on the client port |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.69.11.2.4.528.1.2 |
||||
|
Multicast Counter Error :This
OID when set indicates the Multicast counter value is invalid on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.11.2.4.528.1.3 |
||||
|
Multicast Counter Overload :This
OID when set indicates a Multicast counter overload on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.11.2.4.528.1.4 |
.1.3.6.1.4.1.20044.69.11.2.4.560
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm20020maMondownRmonPauseFrameCounterClientOutputTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm20020ma-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm20020ma-MIB::pm20020maMondownRmonPauseFrameCounterClientOutputTable'
List of pm20020maMondownRmonPauseFrameCounterClientOutput Article
Row definition for the pm20020maMondownRmonPauseFrameCounterClientOutput
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm20020maMondownRmonPauseFrameCounterClientOutput
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.69.11.2.4.560.1.1 |
||||
|
Client Output Pause Frames :This
counter is increased each time a Pause frame is transmitted on the client port <Help> This counter gives the number of Pause frames transmitted on the client port |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.69.11.2.4.560.1.2 |
||||
|
Pause Counter Error :This OID
when set indicates the Pause counter value is invalid on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.11.2.4.560.1.3 |
||||
|
Pause Counter Overload :This OID
when set indicates a Pause counter overload on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.11.2.4.560.1.4 |
.1.3.6.1.4.1.20044.69.11.2.4.688
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm20020maMondownRmonUnicastCounterClientOutputTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm20020ma-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm20020ma-MIB::pm20020maMondownRmonUnicastCounterClientOutputTable'
List of pm20020maMondownRmonUnicastCounterClientOutput Article
Row definition for the pm20020maMondownRmonUnicastCounterClientOutput
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm20020maMondownRmonUnicastCounterClientOutput
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.69.11.2.4.688.1.1 |
||||
|
Client Output Unicast Packets
:This counter is increased each time a Unicast packet is transmitted on the client port <Help> This counter gives the number of Unicast packets transmitted on the client port |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.69.11.2.4.688.1.2 |
||||
|
Unicast Counter Error :This OID
when set indicates the Unicast counter value is invalid on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.11.2.4.688.1.3 |
||||
|
Unicast Counter Overload :This
OID when set indicates a Unicast counter overload on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.11.2.4.688.1.4 |
.1.3.6.1.4.1.20044.69.11.2.4.720
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm20020maMondownRmonNonunicastCounterClientOutputTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm20020ma-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm20020ma-MIB::pm20020maMondownRmonNonunicastCounterClientOutputTable'
List of pm20020maMondownRmonNonunicastCounterClientOutput Article
Row definition for the pm20020maMondownRmonNonunicastCounterClientOutput
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm20020maMondownRmonNonunicastCounterClientOutput
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.69.11.2.4.720.1.1 |
||||
|
Client Output Non Unicast Packets
:This counter is increased each time a Non-Unicast packet is transmitted on the client port <Help> This counter gives the number of Non-Unicast packets transmitted on the client … |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.69.11.2.4.720.1.2 |
||||
|
Non Unicast Counter Error :This
OID when set indicates the Non-Unicast counter value is invalid on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.11.2.4.720.1.3 |
||||
|
Non Unicast Counter Overload :This
OID when set indicates a Non-Unicast counter overload on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.11.2.4.720.1.4 |
.1.3.6.1.4.1.20044.69.11.6.16
·
1 row entry
·
11 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm20020maPerfTelecomInputClientCurrent15StatTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm20020ma-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm20020ma-MIB::pm20020maPerfTelecomInputClientCurrent15StatTable'
List of pm20020maPerfTelecomInputClientCurrent15Stat Article
Row definition for the pm20020maPerfTelecomInputClientCurrent15Stat
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm20020maPerfTelecomInputClientCurrent15Stat
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.69.11.6.16.1.1 |
||||
|
Current 15-min EBC counter inv.
:This OID indicates that the current 15-min Coding Violation counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.11.6.16.1.2 |
||||
|
Current 15-min EBC counter :This
OID gives the current 15-min Coding Violation counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.69.11.6.16.1.3 |
||||
|
Current 15-min ES counter inv.
:This OID indicates that the current 15-min Errored Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.11.6.16.1.4 |
||||
|
Current 15-min ES counter :This
OID gives the current 15-min Errored Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.69.11.6.16.1.5 |
||||
|
Current 15-min SES counter inv.
:This OID indicates that the current 15-min severely Errored Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.11.6.16.1.6 |
||||
|
Current 15-min SES counter :This
OID gives the current 15-min severely Errored Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.69.11.6.16.1.7 |
||||
|
Current 15-min SEFS counter inv.
:This OID indicates that the current 15-min severely Errored Framing Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.11.6.16.1.8 |
||||
|
Current 15-min SEFS counter :This
OID gives the current 15-min severely Errored Framing Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.69.11.6.16.1.9 |
||||
|
Current 15-min UAS counter inv.
:This OID indicates that the current 15-min UnAvailable Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.11.6.16.1.10 |
||||
|
Current 15-min UAS counter :This
OID gives the current 15-min UnAvailable Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.69.11.6.16.1.11 |
.1.3.6.1.4.1.20044.69.11.6.48
·
1 row entry
·
11 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm20020maPerfTelecomInputClientPast15StatHistoryPort1Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm20020ma-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm20020ma-MIB::pm20020maPerfTelecomInputClientPast15StatHistoryPort1Table'
List of pm20020maPerfTelecomInputClientPast15StatHistory Article
Row definition for the pm20020maPerfTelecomInputClientPast15StatHistory
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm20020maPerfTelecomInputClientPast15StatHistory
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.69.11.6.48.1.1 |
||||
|
Previous 15-min EBC counter inv.
:This OID indicates that the previous 15-min Coding Violation counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.11.6.48.1.2 |
||||
|
Previous 15-min EBC counter :This
OID gives the previous 15-min Coding Violation counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.69.11.6.48.1.3 |
||||
|
Previous 15-min ES counter inv.
:This OID indicates that the previous 15-min Errored Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.11.6.48.1.4 |
||||
|
Previous 15-min ES counter :This
OID gives the previous 15-min Errored Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.69.11.6.48.1.5 |
||||
|
Previous 15-min SES counter inv.
:This OID indicates that the previous 15-min severely Errored Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.11.6.48.1.6 |
||||
|
Previous 15-min SES counter :This
OID gives the previous 15-min severely Errored Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.69.11.6.48.1.7 |
||||
|
Previous 15-min SEFS counter inv.
:This OID indicates that the previous 15-min severely Errored Framing Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.11.6.48.1.8 |
||||
|
Previous 15-min SEFS counter :This
OID gives the previous 15-min severely Errored Framing Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.69.11.6.48.1.9 |
||||
|
Previous 15-min UAS counter inv.
:This OID indicates that the previous 15-min UnAvailable Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.11.6.48.1.10 |
||||
|
Previous 15-min UAS counter :This
OID gives the previous 15-min UnAvailable Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.69.11.6.48.1.11 |
.1.3.6.1.4.1.20044.69.11.6.80
·
1 row entry
·
11 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm20020maPerfTelecomInputClientCurrent24StatTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm20020ma-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm20020ma-MIB::pm20020maPerfTelecomInputClientCurrent24StatTable'
List of pm20020maPerfTelecomInputClientCurrent24Stat Article
Row definition for the pm20020maPerfTelecomInputClientCurrent24Stat
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm20020maPerfTelecomInputClientCurrent24Stat
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.69.11.6.80.1.1 |
||||
|
Current 24-hours EBC counter inv.
:This OID indicates that the current 24-hours Coding Violation counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.11.6.80.1.2 |
||||
|
Current 24-hours EBC counter :This
OID gives the current 24-hours Coding Violation counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.69.11.6.80.1.3 |
||||
|
Current 24-hours ES counter inv.
:This OID indicates that the current 24-hours Errored Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.11.6.80.1.4 |
||||
|
Current 24-hours ES counter :This
OID gives the current 24-hours Errored Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.69.11.6.80.1.5 |
||||
|
Current 24-hours SES counter inv.
:This OID indicates that the current 24-hours severely Errored Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.11.6.80.1.6 |
||||
|
Current 24-hours SES counter :This
OID gives the current 24-hours severely Errored Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.69.11.6.80.1.7 |
||||
|
Current 24-hours SEFS counter
inv. :This OID indicates that the current 24-hours severely Errored Framing Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.11.6.80.1.8 |
||||
|
Current 24-hours SEFS counter
:This OID gives the current 24-hours severely Errored Framing Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.69.11.6.80.1.9 |
||||
|
Current 24-hours UAS counter inv.
:This OID indicates that the current 24-hours UnAvailable Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.11.6.80.1.10 |
||||
|
Current 24-hours UAS counter :This
OID gives the current 24-hours UnAvailable Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.69.11.6.80.1.11 |
.1.3.6.1.4.1.20044.69.11.6.112
·
1 row entry
·
11 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm20020maPerfTelecomInputClientPast24StatHistoryPort1Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm20020ma-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm20020ma-MIB::pm20020maPerfTelecomInputClientPast24StatHistoryPort1Table'
List of pm20020maPerfTelecomInputClientPast24StatHistory Article
Row definition for the pm20020maPerfTelecomInputClientPast24StatHistory
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm20020maPerfTelecomInputClientPast24StatHistory
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.69.11.6.112.1.1 |
||||
|
Previous 24-hours EBC counter
inv. :This OID indicates that the previous 24-hours Coding Violation counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.11.6.112.1.2 |
||||
|
Previous 24-hours EBC counter
:This OID gives the previous 24-hours Coding Violation counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.69.11.6.112.1.3 |
||||
|
Previous 24-hours ES counter inv.
:This OID indicates that the previous 24-hours Errored Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.11.6.112.1.4 |
||||
|
Previous 24-hours ES counter :This
OID gives the previous 24-hours Errored Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.69.11.6.112.1.5 |
||||
|
Previous 24-hours SES counter
inv. :This OID indicates that the previous 24-hours severely Errored Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.11.6.112.1.6 |
||||
|
Previous 24-hours SES counter
:This OID gives the previous 24-hours severely Errored Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.69.11.6.112.1.7 |
||||
|
Previous 24-hours SEFS counter
inv. :This OID indicates that the previous 24-hours severely Errored Framing Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.11.6.112.1.8 |
||||
|
Previous 24-hours SEFS counter
:This OID gives the previous 24-hours severely Errored Framing Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.69.11.6.112.1.9 |
||||
|
Previous 24-hours UAS counter
inv. :This OID indicates that the previous 24-hours UnAvailable Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.11.6.112.1.10 |
||||
|
Previous 24-hours UAS counter
:This OID gives the previous 24-hours UnAvailable Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.69.11.6.112.1.11 |
.1.3.6.1.4.1.20044.69.11.6.144
·
1 row entry
·
11 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm20020maPerfTelecomOutputClientCurrent15StatTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm20020ma-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm20020ma-MIB::pm20020maPerfTelecomOutputClientCurrent15StatTable'
List of pm20020maPerfTelecomOutputClientCurrent15Stat Article
Row definition for the pm20020maPerfTelecomOutputClientCurrent15Stat
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm20020maPerfTelecomOutputClientCurrent15Stat
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.69.11.6.144.1.1 |
||||
|
Current 15-min EBC counter inv.
:This OID indicates that the current 15-min Coding Violation counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.11.6.144.1.2 |
||||
|
Current 15-min EBC counter :This
OID gives the current 15-min Coding Violation counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.69.11.6.144.1.3 |
||||
|
Current 15-min ES counter inv.
:This OID indicates that the current 15-min Errored Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.11.6.144.1.4 |
||||
|
Current 15-min ES counter :This
OID gives the current 15-min Errored Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.69.11.6.144.1.5 |
||||
|
Current 15-min SES counter inv.
:This OID indicates that the current 15-min severely Errored Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.11.6.144.1.6 |
||||
|
Current 15-min SES counter :This
OID gives the current 15-min severely Errored Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.69.11.6.144.1.7 |
||||
|
Current 15-min SEFS counter inv.
:This OID indicates that the current 15-min severely Errored Framing Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.11.6.144.1.8 |
||||
|
Current 15-min SEFS counter :This
OID gives the current 15-min severely Errored Framing Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.69.11.6.144.1.9 |
||||
|
Current 15-min UAS counter inv.
:This OID indicates that the current 15-min UnAvailable Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.11.6.144.1.10 |
||||
|
Current 15-min UAS counter :This
OID gives the current 15-min UnAvailable Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.69.11.6.144.1.11 |
.1.3.6.1.4.1.20044.69.11.6.176
·
1 row entry
·
11 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm20020maPerfTelecomOutputClientPast15StatHistoryPort1Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm20020ma-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm20020ma-MIB::pm20020maPerfTelecomOutputClientPast15StatHistoryPort1Table'
List of pm20020maPerfTelecomOutputClientPast15StatHistory Article
Row definition for the pm20020maPerfTelecomOutputClientPast15StatHistory
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm20020maPerfTelecomOutputClientPast15StatHistory
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.69.11.6.176.1.1 |
||||
|
Previous 15-min EBC counter inv.
:This OID indicates that the previous 15-min Coding Violation counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.11.6.176.1.2 |
||||
|
Previous 15-min EBC counter :This
OID gives the previous 15-min Coding Violation counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.69.11.6.176.1.3 |
||||
|
Previous 15-min ES counter inv.
:This OID indicates that the previous 15-min Errored Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.11.6.176.1.4 |
||||
|
Previous 15-min ES counter :This
OID gives the previous 15-min Errored Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.69.11.6.176.1.5 |
||||
|
Previous 15-min SES counter inv.
:This OID indicates that the previous 15-min severely Errored Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.11.6.176.1.6 |
||||
|
Previous 15-min SES counter :This
OID gives the previous 15-min severely Errored Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.69.11.6.176.1.7 |
||||
|
Previous 15-min SEFS counter inv.
:This OID indicates that the previous 15-min severely Errored Framing Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.11.6.176.1.8 |
||||
|
Previous 15-min SEFS counter :This
OID gives the previous 15-min severely Errored Framing Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.69.11.6.176.1.9 |
||||
|
Previous 15-min UAS counter inv.
:This OID indicates that the previous 15-min UnAvailable Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.11.6.176.1.10 |
||||
|
Previous 15-min UAS counter :This
OID gives the previous 15-min UnAvailable Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.69.11.6.176.1.11 |
.1.3.6.1.4.1.20044.69.11.6.208
·
1 row entry
·
11 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm20020maPerfTelecomOutputClientCurrent24StatTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm20020ma-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm20020ma-MIB::pm20020maPerfTelecomOutputClientCurrent24StatTable'
List of pm20020maPerfTelecomOutputClientCurrent24Stat Article
Row definition for the pm20020maPerfTelecomOutputClientCurrent24Stat
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm20020maPerfTelecomOutputClientCurrent24Stat
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.69.11.6.208.1.1 |
||||
|
Current 24-hours EBC counter inv.
:This OID indicates that the current 24-hours Coding Violation counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.11.6.208.1.2 |
||||
|
Current 24-hours EBC counter :This
OID gives the current 24-hours Coding Violation counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.69.11.6.208.1.3 |
||||
|
Current 24-hours ES counter inv.
:This OID indicates that the current 24-hours Errored Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.11.6.208.1.4 |
||||
|
Current 24-hours ES counter :This
OID gives the current 24-hours Errored Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.69.11.6.208.1.5 |
||||
|
Current 24-hours SES counter inv.
:This OID indicates that the current 24-hours severely Errored Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.11.6.208.1.6 |
||||
|
Current 24-hours SES counter :This
OID gives the current 24-hours severely Errored Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.69.11.6.208.1.7 |
||||
|
Current 24-hours SEFS counter
inv. :This OID indicates that the current 24-hours severely Errored Framing Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.11.6.208.1.8 |
||||
|
Current 24-hours SEFS counter
:This OID gives the current 24-hours severely Errored Framing Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.69.11.6.208.1.9 |
||||
|
Current 24-hours UAS counter inv.
:This OID indicates that the current 24-hours UnAvailable Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.11.6.208.1.10 |
||||
|
Current 24-hours UAS counter :This
OID gives the current 24-hours UnAvailable Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.69.11.6.208.1.11 |
.1.3.6.1.4.1.20044.69.11.6.240
·
1 row entry
·
11 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm20020maPerfTelecomOutputClientPast24StatHistoryPort1Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm20020ma-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm20020ma-MIB::pm20020maPerfTelecomOutputClientPast24StatHistoryPort1Table'
List of pm20020maPerfTelecomOutputClientPast24StatHistory Article
Row definition for the pm20020maPerfTelecomOutputClientPast24StatHistory
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm20020maPerfTelecomOutputClientPast24StatHistory
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.69.11.6.240.1.1 |
||||
|
Previous 24-hours EBC counter
inv. :This OID indicates that the previous 24-hours Coding Violation counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.11.6.240.1.2 |
||||
|
Previous 24-hours EBC counter
:This OID gives the previous 24-hours Coding Violation counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.69.11.6.240.1.3 |
||||
|
Previous 24-hours ES counter inv.
:This OID indicates that the previous 24-hours Errored Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.11.6.240.1.4 |
||||
|
Previous 24-hours ES counter :This
OID gives the previous 24-hours Errored Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.69.11.6.240.1.5 |
||||
|
Previous 24-hours SES counter
inv. :This OID indicates that the previous 24-hours severely Errored Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.11.6.240.1.6 |
||||
|
Previous 24-hours SES counter
:This OID gives the previous 24-hours severely Errored Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.69.11.6.240.1.7 |
||||
|
Previous 24-hours SEFS counter
inv. :This OID indicates that the previous 24-hours severely Errored Framing Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.11.6.240.1.8 |
||||
|
Previous 24-hours SEFS counter
:This OID gives the previous 24-hours severely Errored Framing Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.69.11.6.240.1.9 |
||||
|
Previous 24-hours UAS counter
inv. :This OID indicates that the previous 24-hours UnAvailable Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.11.6.240.1.10 |
||||
|
Previous 24-hours UAS counter
:This OID gives the previous 24-hours UnAvailable Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.69.11.6.240.1.11 |
.1.3.6.1.4.1.20044.69.11.6.848
·
1 row entry
·
9 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm20020maPerfDatacomClientCurrent15StatTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm20020ma-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm20020ma-MIB::pm20020maPerfDatacomClientCurrent15StatTable'
List of pm20020maPerfDatacomClientCurrent15Stat Article
Row definition for the pm20020maPerfDatacomClientCurrent15Stat
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm20020maPerfDatacomClientCurrent15Stat
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.69.11.6.848.1.1 |
||||
|
Client Current 15-min Input CRC
counter inv. :This OID indicates that the current 15-min Input CRC counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.11.6.848.1.4 |
||||
|
Client Current 15-min Input CRC
counter :This OID gives the current 15-min Input CRC counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.69.11.6.848.1.5 |
||||
|
Client Current 15-min Input Packet
counter inv. :This OID indicates that the current 15-min Input Packet counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.11.6.848.1.6 |
||||
|
Client Current 15-min Input Packet
counter :This OID gives the current 15-min Input Packet counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.69.11.6.848.1.7 |
||||
|
Client Current 15-min Output CRC
counter inv. :This OID indicates that the current 15-min Output CRC counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.11.6.848.1.28 |
||||
|
Client Current 15-min Output CRC
counter :This OID gives the current 15-min Output CRC counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.69.11.6.848.1.29 |
||||
|
Client Current 15-min Output Packet
counter inv. :This OID indicates that the current 15-min Output Packets counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.11.6.848.1.30 |
||||
|
Client Current 15-min Output Packet
counter :This OID gives the current 15-min Output Packets counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.69.11.6.848.1.31 |
.1.3.6.1.4.1.20044.69.11.6.880
·
1 row entry
·
9 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm20020maPerfDatacomClientPast15StatHistoryPort1Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm20020ma-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm20020ma-MIB::pm20020maPerfDatacomClientPast15StatHistoryPort1Table'
List of pm20020maPerfDatacomClientPast15StatHistory Article
Row definition for the pm20020maPerfDatacomClientPast15StatHistory
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm20020maPerfDatacomClientPast15StatHistory
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.69.11.6.880.1.1 |
||||
|
Client Past 15-min Input CRC counter
inv. :This OID indicates that the past 15-min Input CRC counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.11.6.880.1.4 |
||||
|
Client Past 15-min Input CRC counter
:This OID gives the past 15-min Input CRC counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.69.11.6.880.1.5 |
||||
|
Client Past 15-min Input Packet
counter inv. :This OID indicates that the past 15-min Input Packet counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.11.6.880.1.6 |
||||
|
Client Past 15-min Input Packet
counter :This OID gives the past 15-min Input Packet counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.69.11.6.880.1.7 |
||||
|
Client Past 15-min Output CRC
counter inv. :This OID indicates that the past 15-min Output CRC counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.11.6.880.1.28 |
||||
|
Client Past 15-min Output CRC
counter :This OID gives the past 15-min Output CRC counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.69.11.6.880.1.29 |
||||
|
Client Past 15-min Output Packet
counter inv. :This OID indicates that the past 15-min Output Packets counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.11.6.880.1.30 |
||||
|
Client Past 15-min Output Packet
counter :This OID gives the past 15-min Output Packets counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.69.11.6.880.1.31 |
.1.3.6.1.4.1.20044.69.11.6.912
·
1 row entry
·
9 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm20020maPerfDatacomClientCurrent24StatTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm20020ma-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm20020ma-MIB::pm20020maPerfDatacomClientCurrent24StatTable'
List of pm20020maPerfDatacomClientCurrent24Stat Article
Row definition for the pm20020maPerfDatacomClientCurrent24Stat
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm20020maPerfDatacomClientCurrent24Stat
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.69.11.6.912.1.1 |
||||
|
Client Current 24-hours Input
CRC counter inv. :This OID indicates that the current 24-hours Input CRC counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.11.6.912.1.4 |
||||
|
Client Current 24-hours Input
CRC counter :This OID gives the current 24-hours Input CRC counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.69.11.6.912.1.5 |
||||
|
Client Current 24-hours Input
Packet counter inv. :This OID indicates that the current 24-hours Input Packet counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.11.6.912.1.6 |
||||
|
Client Current 24-hours Input
Packet counter :This OID gives the current 24-hours Input Packet counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.69.11.6.912.1.7 |
||||
|
Client Current 24-hours Output
CRC counter inv. :This OID indicates that the current 24-hours Output CRC counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.11.6.912.1.28 |
||||
|
Client Current 24-hours Output
CRC counter :This OID gives the current 24-hours Output CRC counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.69.11.6.912.1.29 |
||||
|
Client Current 24-hours Output
Packet counter inv. :This OID indicates that the current 24-hours Output Packets counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.11.6.912.1.30 |
||||
|
Client Current 24-hours Output
Packet counter :This OID gives the current 24-hours Output Packets counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.69.11.6.912.1.31 |
.1.3.6.1.4.1.20044.69.11.6.944
·
1 row entry
·
9 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm20020maPerfDatacomClientPast24StatHistoryPort1Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm20020ma-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm20020ma-MIB::pm20020maPerfDatacomClientPast24StatHistoryPort1Table'
List of pm20020maPerfDatacomClientPast24StatHistory Article
Row definition for the pm20020maPerfDatacomClientPast24StatHistory
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm20020maPerfDatacomClientPast24StatHistory
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.69.11.6.944.1.1 |
||||
|
Client Past 24-hours Input CRC
counter inv. :This OID indicates that the past 24-hours Input CRC counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.11.6.944.1.4 |
||||
|
Client Past 24-hours Input CRC
counter :This OID gives the past 24-hours Input CRC counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.69.11.6.944.1.5 |
||||
|
Client Past 24-hours Input Packet
counter inv. :This OID indicates that the past 24-hours Input Packet counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.11.6.944.1.6 |
||||
|
Client Past 24-hours Input Packet
counter :This OID gives the past 24-hours Input Packet counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.69.11.6.944.1.7 |
||||
|
Client Past 24-hours Output CRC
counter inv. :This OID indicates that the past 24-hours Output CRC counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.11.6.944.1.28 |
||||
|
Client Past 24-hours Output CRC
counter :This OID gives the past 24-hours Output CRC counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.69.11.6.944.1.29 |
||||
|
Client Past 24-hours Output Packet
counter inv. :This OID indicates that the past 24-hours Output Packets counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.11.6.944.1.30 |
||||
|
Client Past 24-hours Output Packet
counter :This OID gives the past 24-hours Output Packets counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.69.11.6.944.1.31 |
.1.3.6.1.4.1.20044.69.11.7.336
·
1 row entry
·
11 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm20020maPerfTelecomLinePostFecCurrent15StatTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm20020ma-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm20020ma-MIB::pm20020maPerfTelecomLinePostFecCurrent15StatTable'
List of pm20020maPerfTelecomLinePostFecCurrent15Stat Article
Row definition for the pm20020maPerfTelecomLinePostFecCurrent15Stat
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm20020maPerfTelecomLinePostFecCurrent15Stat
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.69.11.7.336.1.1 |
||||
|
Current 15-min EBC counter inv.
:This OID indicates that the current 15-min Coding Violation counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.11.7.336.1.2 |
||||
|
Current 15-min EBC counter :This
OID gives the current 15-min Coding Violation counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.69.11.7.336.1.3 |
||||
|
Current 15-min ES counter inv.
:This OID indicates that the current 15-min Errored Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.11.7.336.1.4 |
||||
|
Current 15-min ES counter :This
OID gives the current 15-min Errored Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.69.11.7.336.1.5 |
||||
|
Current 15-min SES counter inv.
:This OID indicates that the current 15-min severely Errored Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.11.7.336.1.6 |
||||
|
Current 15-min SES counter :This
OID gives the current 15-min severely Errored Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.69.11.7.336.1.7 |
||||
|
Current 15-min SEFS counter inv.
:This OID indicates that the current 15-min severely Errored Framing Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.11.7.336.1.8 |
||||
|
Current 15-min SEFS counter :This
OID gives the current 15-min severely Errored Framing Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.69.11.7.336.1.9 |
||||
|
Current 15-min UAS counter inv.
:This OID indicates that the current 15-min UnAvailable Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.11.7.336.1.10 |
||||
|
Current 15-min UAS counter :This
OID gives the current 15-min UnAvailable Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.69.11.7.336.1.11 |
.1.3.6.1.4.1.20044.69.11.7.337
·
1 row entry
·
11 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm20020maPerfTelecomLinePostFecPast15StatHistoryPort1Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm20020ma-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm20020ma-MIB::pm20020maPerfTelecomLinePostFecPast15StatHistoryPort1Table'
List of pm20020maPerfTelecomLinePostFecPast15StatHistory Article
Row definition for the pm20020maPerfTelecomLinePostFecPast15StatHistory
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm20020maPerfTelecomLinePostFecPast15StatHistory
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.69.11.7.337.1.1 |
||||
|
Previous 15-min EBC counter inv.
:This OID indicates that the previous 15-min Coding Violation counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.11.7.337.1.2 |
||||
|
Previous 15-min EBC counter :This
OID gives the previous 15-min Coding Violation counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.69.11.7.337.1.3 |
||||
|
Previous 15-min ES counter inv.
:This OID indicates that the previous 15-min Errored Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.11.7.337.1.4 |
||||
|
Previous 15-min ES counter :This
OID gives the previous 15-min Errored Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.69.11.7.337.1.5 |
||||
|
Previous 15-min SES counter inv.
:This OID indicates that the previous 15-min severely Errored Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.11.7.337.1.6 |
||||
|
Previous 15-min SES counter :This
OID gives the previous 15-min severely Errored Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.69.11.7.337.1.7 |
||||
|
Previous 15-min SEFS counter inv.
:This OID indicates that the previous 15-min severely Errored Framing Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.11.7.337.1.8 |
||||
|
Previous 15-min SEFS counter :This
OID gives the previous 15-min severely Errored Framing Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.69.11.7.337.1.9 |
||||
|
Previous 15-min UAS counter inv.
:This OID indicates that the previous 15-min UnAvailable Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.11.7.337.1.10 |
||||
|
Previous 15-min UAS counter :This
OID gives the previous 15-min UnAvailable Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.69.11.7.337.1.11 |
.1.3.6.1.4.1.20044.69.11.7.338
·
1 row entry
·
11 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm20020maPerfTelecomLinePostFecCurrent24StatTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm20020ma-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm20020ma-MIB::pm20020maPerfTelecomLinePostFecCurrent24StatTable'
List of pm20020maPerfTelecomLinePostFecCurrent24Stat Article
Row definition for the pm20020maPerfTelecomLinePostFecCurrent24Stat
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm20020maPerfTelecomLinePostFecCurrent24Stat
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.69.11.7.338.1.1 |
||||
|
Current 24-hours EBC counter inv.
:This OID indicates that the current 24-hours Coding Violation counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.11.7.338.1.2 |
||||
|
Current 24-hours EBC counter :This
OID gives the current 24-hours Coding Violation counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.69.11.7.338.1.3 |
||||
|
Current 24-hours ES counter inv.
:This OID indicates that the current 24-hours Errored Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.11.7.338.1.4 |
||||
|
Current 24-hours ES counter :This
OID gives the current 24-hours Errored Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.69.11.7.338.1.5 |
||||
|
Current 24-hours SES counter inv.
:This OID indicates that the current 24-hours severely Errored Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.11.7.338.1.6 |
||||
|
Current 24-hours SES counter :This
OID gives the current 24-hours severely Errored Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.69.11.7.338.1.7 |
||||
|
Current 24-hours SEFS counter
inv. :This OID indicates that the current 24-hours severely Errored Framing Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.11.7.338.1.8 |
||||
|
Current 24-hours SEFS counter
:This OID gives the current 24-hours severely Errored Framing Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.69.11.7.338.1.9 |
||||
|
Current 24-hours UAS counter inv.
:This OID indicates that the current 24-hours UnAvailable Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.11.7.338.1.10 |
||||
|
Current 24-hours UAS counter :This
OID gives the current 24-hours UnAvailable Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.69.11.7.338.1.11 |
.1.3.6.1.4.1.20044.69.11.7.339
·
1 row entry
·
11 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm20020maPerfTelecomLinePostFecPast24StatHistoryPort1Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm20020ma-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm20020ma-MIB::pm20020maPerfTelecomLinePostFecPast24StatHistoryPort1Table'
List of pm20020maPerfTelecomLinePostFecPast24StatHistory Article
Row definition for the pm20020maPerfTelecomLinePostFecPast24StatHistory
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm20020maPerfTelecomLinePostFecPast24StatHistory
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.69.11.7.339.1.1 |
||||
|
Previous 24-hours EBC counter
inv. :This OID indicates that the previous 24-hours Coding Violation counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.11.7.339.1.2 |
||||
|
Previous 24-hours EBC counter
:This OID gives the previous 24-hours Coding Violation counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.69.11.7.339.1.3 |
||||
|
Previous 24-hours ES counter inv.
:This OID indicates that the previous 24-hours Errored Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.11.7.339.1.4 |
||||
|
Previous 24-hours ES counter :This
OID gives the previous 24-hours Errored Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.69.11.7.339.1.5 |
||||
|
Previous 24-hours SES counter
inv. :This OID indicates that the previous 24-hours severely Errored Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.11.7.339.1.6 |
||||
|
Previous 24-hours SES counter
:This OID gives the previous 24-hours severely Errored Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.69.11.7.339.1.7 |
||||
|
Previous 24-hours SEFS counter
inv. :This OID indicates that the previous 24-hours severely Errored Framing Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.11.7.339.1.8 |
||||
|
Previous 24-hours SEFS counter
:This OID gives the previous 24-hours severely Errored Framing Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.69.11.7.339.1.9 |
||||
|
Previous 24-hours UAS counter
inv. :This OID indicates that the previous 24-hours UnAvailable Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.11.7.339.1.10 |
||||
|
Previous 24-hours UAS counter
:This OID gives the previous 24-hours UnAvailable Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.69.11.7.339.1.11 |
.1.3.6.1.4.1.20044.69.11.7.352
·
1 row entry
·
7 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm20020maPerfTelecomBerLinePreFecCurrent15StatTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm20020ma-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm20020ma-MIB::pm20020maPerfTelecomBerLinePreFecCurrent15StatTable'
List of pm20020maPerfTelecomBerLinePreFecCurrent15Stat Article
Row definition for the pm20020maPerfTelecomBerLinePreFecCurrent15Stat
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm20020maPerfTelecomBerLinePreFecCurrent15Stat
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.69.11.7.352.1.1 |
||||
|
Current 15-min BER counter inv.
:This OID indicates that the current 15-min Coding Violation counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.11.7.352.1.2 |
||||
|
Current 15-min BER counter :This
OID gives the current 15-min Coding Violation counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.69.11.7.352.1.3 |
||||
|
Current 15-min MinBER counter
inv. :This OID indicates that the current 15-min Errored Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.11.7.352.1.4 |
||||
|
Current 15-min MinBER counter
:This OID gives the current 15-min Errored Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.69.11.7.352.1.5 |
||||
|
Current 15-min MaxBER counter
inv. :This OID indicates that the current 15-min severely Errored Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.11.7.352.1.6 |
||||
|
Current 15-min MaxBER counter
:This OID gives the current 15-min severely Errored Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.69.11.7.352.1.7 |
.1.3.6.1.4.1.20044.69.11.7.353
·
1 row entry
·
7 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm20020maPerfTelecomBerLinePreFecPast15StatHistoryPort1Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm20020ma-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm20020ma-MIB::pm20020maPerfTelecomBerLinePreFecPast15StatHistoryPort1Table'
List of pm20020maPerfTelecomBerLinePreFecPast15StatHistory Article
Row definition for the pm20020maPerfTelecomBerLinePreFecPast15StatHistory
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm20020maPerfTelecomBerLinePreFecPast15StatHistory
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.69.11.7.353.1.1 |
||||
|
Previous 15-min BER counter inv.
:This OID indicates that the previous 15-min Coding Violation counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.11.7.353.1.2 |
||||
|
Previous 15-min BER counter :This
OID gives the previous 15-min Coding Violation counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.69.11.7.353.1.3 |
||||
|
Previous 15-min MinBER counter
inv. :This OID indicates that the previous 15-min Errored Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.11.7.353.1.4 |
||||
|
Previous 15-min MinBER counter
:This OID gives the previous 15-min Errored Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.69.11.7.353.1.5 |
||||
|
Previous 15-min MaxBER counter
inv. :This OID indicates that the previous 15-min severely Errored Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.11.7.353.1.6 |
||||
|
Previous 15-min MaxBER counter
:This OID gives the previous 15-min severely Errored Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.69.11.7.353.1.7 |
.1.3.6.1.4.1.20044.69.11.7.354
·
1 row entry
·
7 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm20020maPerfTelecomBerLinePreFecCurrent24StatTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm20020ma-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm20020ma-MIB::pm20020maPerfTelecomBerLinePreFecCurrent24StatTable'
List of pm20020maPerfTelecomBerLinePreFecCurrent24Stat Article
Row definition for the pm20020maPerfTelecomBerLinePreFecCurrent24Stat
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm20020maPerfTelecomBerLinePreFecCurrent24Stat
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.69.11.7.354.1.1 |
||||
|
Current 24-hours BER counter inv.
:This OID indicates that the current 24-hours Coding Violation counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.11.7.354.1.2 |
||||
|
Current 24-hours BER counter :This
OID gives the current 24-hours Coding Violation counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.69.11.7.354.1.3 |
||||
|
Current 24-hoursMinBER counter
inv. :This OID indicates that the current 24-hours Errored Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.11.7.354.1.4 |
||||
|
Current 24-hours MinBER counter
:This OID gives the current 24-hours Errored Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.69.11.7.354.1.5 |
||||
|
Current 24-hours MaxBER counter
inv. :This OID indicates that the current 24-hours severely Errored Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.11.7.354.1.6 |
||||
|
Current 24-hours MaxBER counter
:This OID gives the current 24-hours severely Errored Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.69.11.7.354.1.7 |
.1.3.6.1.4.1.20044.69.11.7.355
·
1 row entry
·
7 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm20020maPerfTelecomBerLinePreFecPast24StatHistoryPort1Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm20020ma-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm20020ma-MIB::pm20020maPerfTelecomBerLinePreFecPast24StatHistoryPort1Table'
List of pm20020maPerfTelecomBerLinePreFecPast24StatHistory Article
Row definition for the pm20020maPerfTelecomBerLinePreFecPast24StatHistory
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm20020maPerfTelecomBerLinePreFecPast24StatHistory
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.69.11.7.355.1.1 |
||||
|
Previous 24-hours BER counter
inv. :This OID indicates that the previous 24-hours Coding Violation counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.11.7.355.1.2 |
||||
|
Previous 24-hours BER counter
:This OID gives the previous 24-hours Coding Violation counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.69.11.7.355.1.3 |
||||
|
Previous 24-hours MinBER counter
inv. :This OID indicates that the previous 24-hours Errored Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.11.7.355.1.4 |
||||
|
Previous 24-hours MinBER counter
:This OID gives the previous 24-hours Errored Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.69.11.7.355.1.5 |
||||
|
Previous 24-hours MaxBER counter
inv. :This OID indicates that the previous 24-hours severely Errored Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.69.11.7.355.1.6 |
||||
|
Previous 24-hours MaxBER counter
:This OID gives the previous 24-hours severely Errored Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.69.11.7.355.1.7 |