EKINOPS-Pm1004m-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
79
Rows
79
Columns
367
.1.3.6.1.4.1.20044.29.2.2.1.48
·
1 row entry
·
11 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004mAlmsfpWarnDdmTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004m-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004m-MIB::pm1004mAlmsfpWarnDdmTable'
List of pm1004mAlmsfpWarnDdm Article
Row definition for the pm1004mAlmsfpWarnDdm
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm1004mAlmsfpWarnDdm
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.29.2.2.1.48.1.1 |
||||
|
Client SFP Tx Power Low Warning
:Warning indicating that the SFP output power of port is lower than the threshold value written in the SFP EEPROM <Condtype> TX_PW_LOW_WNG_1 <Probcause> transmitterFailure (56) <Ala… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.29.2.2.1.48.1.2 |
||||
|
Client SFP Tx Power High Warning
:Warning indicating that the SFP output power of port is higher than the threshold value written in the SFP EEPROM <Condtype> TX_PWR_HIGH_WNG_1 <Probcause> transmitterFailure (56) … |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.29.2.2.1.48.1.3 |
||||
|
Client SFP Bias Low Warning :Warning
indicating that the SFP laser bias current of port is lower than the threshold value written in the SFP EEPROM <Condtype> TX_BIAS_LOW_WNG_1 <Probcause> transmitterFailure (56) … |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.29.2.2.1.48.1.4 |
||||
|
Client SFP Bias High Warning :Warning
indicating that the SFP laser bias current of port is higher than the threshold value written in the SFP EEPROM <Condtype> TX_BIAS_HIGH_WNG_1 <Probcause> transmitterFailure (5… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.29.2.2.1.48.1.5 |
||||
|
Client SFP Power Supply Low Warning
:Warning indicating that the SFP power supply of port is lower than the threshold value written in the SFP EEPROM <Condtype> VCC_LOW_WNG_1 <Probcause> powerProblem (36) <Alarmty… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.29.2.2.1.48.1.6 |
||||
|
Client SFP Power Supply High Warning
:Warning indicating that the SFP power supply of port is higher than the threshold value written in the SFP EEPROM <Condtype> VCC_HIGH_WNG_1 <Probcause> powerProblem (36) <Alar… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.29.2.2.1.48.1.7 |
||||
|
Client SFP Temp Low Warning :Warning
indicating that the SFP temperature of port is lower than the threshold value written in the SFP EEPROM <Condtype> TEMP_LOW_WNG_1 <Probcause> temperatureUnacceptable (51) <Alarm… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.29.2.2.1.48.1.8 |
||||
|
Client SFP Temp High Warning :Warning
indicating that the SFP temperature of port is higher than the threshold value written in the SFP EEPROM <Condtype> TEMP_HIGH_WNG_1 <Probcause> temperatureUnacceptable (51) <Al… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.29.2.2.1.48.1.9 |
||||
|
Client SFP Rx Power Low Warning
:Warning indicating that the SFP input power of port is lower than the threshold value written in the SFP EEPROM <Condtype> RX_PWR_LOW_WNG_1 <Probcause> receiveFailure (41) <Alarmty… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.29.2.2.1.48.1.16 |
||||
|
Client SFP Rx Power High Warning
:Warning indicating that the SFP input power of port is higher than the threshold value written in the SFP EEPROM <Condtype> RX_PWR_HIGH_WNG_1 <Probcause> receiveFailure (41) <Alar… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.29.2.2.1.48.1.17 |
.1.3.6.1.4.1.20044.29.2.2.1.96
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004mAlmk1K2ClientTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004m-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004m-MIB::pm1004mAlmk1K2ClientTable'
List of pm1004mAlmk1K2Client Article
Row definition for the pm1004mAlmk1K2Client
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the pm1004mAlmk1K2Client
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.29.2.2.1.96.1.1 |
|
Client K1-K2 Extracted Value :This
OID gives the value of K1 (LSB) and K2 (MSB) extracted from the overhead of the received OC-48c/STM-16c signal <Condtype> CLIENT_1_K1_8 <Probcause> other (1) <Alarmtype> other (1… |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.20044.29.2.2.1.96.1.2 |
pm1004mAlmsfpAlmDdmTable
table.1.3.6.1.4.1.20044.29.2.2.2.32
·
1 row entry
·
11 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004mAlmsfpAlmDdmTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004m-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004m-MIB::pm1004mAlmsfpAlmDdmTable'
List of pm1004mAlmsfpAlmDdm Article
Row definition for the pm1004mAlmsfpAlmDdm
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm1004mAlmsfpAlmDdm
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.29.2.2.2.32.1.1 |
||||
|
Client SFP Tx Power Low :Alarm
indicating that the SFP output power of port is lower than the threshold value written in the SFP EEPROM <Condtype> TX_PWR_LOW_ALA_1 <Probcause> transmitterFailure (56) <Alarmtype> e… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.29.2.2.2.32.1.2 |
||||
|
Client SFP Tx Power High :Alarm
indicating that the SFP output power of port is higher than the threshold value written in the SFP EEPROM <Condtype> TX_PWR_HIGH_ALA_1 <Probcause> transmitterFailure (56) <Alarmtype… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.29.2.2.2.32.1.3 |
||||
|
Client SFP Bias Low :Alarm indicating
that the SFP laser bias current of port is lower than the threshold value written in the SFP EEPROM <Condtype> TX_BIAS_LOW_ALA_1 <Probcause> transmitterFailure (56) <Alarmtype>… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.29.2.2.2.32.1.4 |
||||
|
Client SFP Bias High :Alarm indicating
that the SFP laser bias current of port is higher than the threshold value written in the SFP EEPROM <Condtype> TX_BIAS_HIGH_ALA_1 <Probcause> transmitterFailure (56) <Alarmty… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.29.2.2.2.32.1.5 |
||||
|
Client SFP Power Supply Low :Alarm
indicating that the SFP power supply of port is lower than the threshold value written in the SFP EEPROM <Condtype> VCC_LOW_ALA_1 <Probcause> powerProblem (36) <Alarmtype> equipm… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.29.2.2.2.32.1.6 |
||||
|
Client SFP Power Supply High :Alarm
indicating that the SFP power supply of port is higher than the threshold value written in the SFP EEPROM <Condtype> VCC_HIGH_ALA_1 <Probcause> powerProblem (36) <Alarmtype> equ… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.29.2.2.2.32.1.7 |
||||
|
Client SFP Temp Low :Alarm indicating
that the SFP temperature of port is lower than the threshold value written in the SFP EEPROM <Condtype> TEMP_LOW_ALA_1 <Probcause> temperatureUnacceptable (51) <Alarmtype> equi… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.29.2.2.2.32.1.8 |
||||
|
Client SFP Temp High :Alarm indicating
that the SFP temperature of port is higher than the threshold value written in the SFP EEPROM <Condtype> TEMP_HIGH_ALA_1 <Probcause> temperatureUnacceptable (51) <Alarmtype> e… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.29.2.2.2.32.1.9 |
||||
|
Client SFP Rx Power Low :Alarm
indicating that the SFP input power of port is lower than the threshold value written in the SFP EEPROM <Condtype> RX_PWR_LOW_ALA_1 <Probcause> receiveFailure (41) <Alarmtype> equipm… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.29.2.2.2.32.1.16 |
||||
|
Client SFP Rx Power High :Alarm
indicating that the SFP input power of port is higher than the threshold value written in the SFP EEPROM <Condtype> RX_PWR_HIGH_ALA_1 <Probcause> receiveFailure (41) <Alarmtype> equ… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.29.2.2.2.32.1.17 |
.1.3.6.1.4.1.20044.29.2.2.3.8
·
1 row entry
·
12 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004mAlmsynthAlmPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004m-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004m-MIB::pm1004mAlmsynthAlmPortTable'
List of pm1004mAlmsynthAlmPort Article
Row definition for the pm1004mAlmsynthAlmPort
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm1004mAlmsynthAlmPort
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.29.2.2.3.8.1.1 |
||||
|
Client SFP Absent :This OID indicates
that the SFP module is not present in the client port. <Help> This alarm indicates if the client transceiver is present. <Condtype> SFP_ABSENT_1 <Probcause> inputOutputDevice… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.29.2.2.3.8.1.2 |
||||
|
DDM Supported On Client SFP :This
OID indicates that the Client SFP module supports the Digital Diagnostic Monitoring function <Help> This status indicates if the client transceiver includes the DDM feature <Con… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.29.2.2.3.8.1.3 |
||||
|
Client HW Fail :This OID indicates
a failure on client port, most probably caused by a HW issue. <Condtype> HW_FAIL_ACC_1 <Probcause> equipmentMalfunction (16) <Alarmtype> synthesisAlarm (12) <Polarity> (2) |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.29.2.2.3.8.1.5 |
||||
|
Client SFP Laser Shutdown :This
OID indicates the Client SFP transmitter output is ON. <Help> This status indicates if the client transceiver laser is ON or OFF <Condtype> DW_LSD_1 <Probcause> other (1) <Alarmty… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.29.2.2.3.8.1.6 |
||||
|
Local Client Port In Service :This
OID indicates that the local Client port is In Service (1) or Out of Service (2) <Help> This status indicates if the local client port is in service <Condtype> CLIENT_LOCAL_OOS … |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.29.2.2.3.8.1.7 |
||||
|
Remote Client Port In Service
:This OID indicates that the remote Client port is In Service (1) or Out of Service (2) <Help> This status indicates if the remote client port is in service <Condtype> CLIENT_REMOTE… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.29.2.2.3.8.1.8 |
||||
|
Client AIS Inserted :This OID
indicates a CAIS has been inserted on the output client port. <Help> This status indicates if a Client Alarm Indication Signal is currently inserted on the client interface <Condtyp… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.29.2.2.3.8.1.9 |
||||
|
Warning On Client SFP DDM :This
OID indicates a warning is being received from the Client SFP DDM <Help> This alarm indicates if a DDM Warning has been detected on the client transceiver <Condtype> SFP_DDM_WARNI… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.29.2.2.3.8.1.10 |
||||
|
Alarm On Client SFP DDM :This
OID indicates an alarm is being received from the Client SFP DDM <Help> This alarm indicates if a DDM Alarm has been detected on the client transceiver <Condtype> SFP_DDM_ALM_1 <Pro… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.29.2.2.3.8.1.11 |
||||
|
Client Access Fail :This OID indicates
a failure on the Client port <Condtype> FAIL_ACC_1 <Probcause> equipmentMalfunction (16) <Alarmtype> synthesisAlarm (12) <Polarity> (2) |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.29.2.2.3.8.1.13 |
||||
|
Client Signal Fail Inserted :This
OID indicates a CSF has been inserted in the upstream client port. <Help> This status indicates if a Client Signal Fail is currently inserted on the line signal for this client … |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.29.2.2.3.8.1.17 |
.1.3.6.1.4.1.20044.29.2.2.3.16
·
1 row entry
·
3 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004mAlmaccessioAlmTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004m-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004m-MIB::pm1004mAlmaccessioAlmTable'
List of pm1004mAlmaccessioAlm Article
Row definition for the pm1004mAlmaccessioAlm
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm1004mAlmaccessioAlm
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.29.2.2.3.16.1.1 |
||||
|
Client SFP Tx Failed :This OID
indicates that the transmitter fails for the SFP plugged into the client port (this alarm reports the transmitter failure alarm generated by the SFPs) <Help> This alarm indicates i… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.29.2.2.3.16.1.2 |
||||
|
Client Input Loss Of Signal :This
OID indicates that no signal is present on the SFP of the client port <Help> This alarm indicates if an optical signal is detected on the client transceiver input <Condtype> UP_… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.29.2.2.3.16.1.5 |
.1.3.6.1.4.1.20044.29.2.2.3.72
·
1 row entry
·
5 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004mAlmmapperDeAlmTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004m-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004m-MIB::pm1004mAlmmapperDeAlmTable'
List of pm1004mAlmmapperDeAlm Article
Row definition for the pm1004mAlmmapperDeAlm
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm1004mAlmmapperDeAlm
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.29.2.2.3.72.1.1 |
||||
|
Client Loss Of Frame :This OID
indicates the upstream client input port is in Loss of Frame condition <Help> This alarm indicates if there is a Loss of Frame is detected on the client input signal <Condtype> UP_… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.29.2.2.3.72.1.2 |
||||
|
Client Upstream Buffer Overload
:This OID indicates that the rate adaptation buffer for client port is in overload. <Help> This alarm indicates if there is a upstream FIFO overload for this client port <Condtype… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.29.2.2.3.72.1.11 |
||||
|
Client Signal Fail Detected :This
OID indicates that a CSF has been detected on client port in the downstream direction <Help> This alarm indicates if a Client Signal Fail has been detected in the incoming line… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.29.2.2.3.72.1.12 |
||||
|
Client Downstream Buffer Overload
:This OID indicates that the de-mapper buffer for client port is in overload. <Help> This alarm indicates if there is a downstream FIFO overload for this client port <Condtype> … |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.29.2.2.3.72.1.15 |
.1.3.6.1.4.1.20044.29.2.2.3.104
·
1 row entry
·
7 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004mAlmaccessioSdhAlarmTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004m-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004m-MIB::pm1004mAlmaccessioSdhAlarmTable'
List of pm1004mAlmaccessioSdhAlarm Article
Row definition for the pm1004mAlmaccessioSdhAlarm
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm1004mAlmaccessioSdhAlarm
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.29.2.2.3.104.1.1 |
||||
|
Client Transceiver Fifo Error
:This OID indicates that an error has been detected in the FIFO of the client transceiver <Condtype> FIFO_ERR_1 <Probcause> transmitterFailure (56) <Alarmtype> equipmentAlarm (5) <Pol… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.29.2.2.3.104.1.3 |
||||
|
Client Rx Clock Lock Error :This
OID indicates the recovered receive clock of the client transceiver is not locked <Condtype> RX_LOSS_OF_LOCK_1 <Probcause> receiveFailure (41) <Alarmtype> equipmentAlarm (5) <Polar… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.29.2.2.3.104.1.4 |
||||
|
Client Tx Clock Lock Error :This
OID indicates that the transmit clock of the client transceiver is not locke <Condtype> TX_LOSS_OF_LOCK_1 <Probcause> transmitterFailure (56) <Alarmtype> equipmentAlarm (5) <Polari… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.29.2.2.3.104.1.5 |
||||
|
Client MS-AIS :This OID indicates
that a MS-AIS has been detected on the client input stream <Help> This alarm indicates if there is a MS-AIS/L-AIS is detected on the client input signal <Condtype> CLIENT_AIS_DE… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.29.2.2.3.104.1.6 |
||||
|
Client MS-RDI :This OID indicates
that a MS-RDI has been detected on the client input stream <Help> This alarm indicates if there is a MS-RDI/L-RDI is detected on the client input signal <Condtype> CLIENT_RDI_DE… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.29.2.2.3.104.1.7 |
||||
|
Client Out Of Frame :This OID
indicates that an Out Of Frame condition has been detected on the OC-48/STM-16 client input stream <Help> This alarm indicates if there is a Out of Frame is detected on the client … |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.29.2.2.3.104.1.8 |
.1.3.6.1.4.1.20044.29.2.3.1.209
·
1 row entry
·
9 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004mAlmlineXfp1WarningsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004m-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004m-MIB::pm1004mAlmlineXfp1WarningsTable'
List of pm1004mAlmlineXfp1Warnings Article
Row definition for the pm1004mAlmlineXfp1Warnings
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm1004mAlmlineXfp1Warnings
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.29.2.3.1.209.1.1 |
||||
|
Line Optical Tx Power Low Warning
:Warning indicating that the XFP/OTX transmitter transmitter output power is lower than the threshold value written in the XFP/OTX EEPROM <Condtype> TX_POWER_LOW_WARNING_1 <Probca… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.29.2.3.1.209.1.2 |
||||
|
Line Optical Tx Power High Warning
:Warning indicating that the XFP/OTX transmitter transmitter output power is higher than the threshold value written in the XFP EEPROM <Condtype> TX_POWER_HIGH_WARNING_1 <Probcau… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.29.2.3.1.209.1.3 |
||||
|
Line Transceiver Bias Low Warning
:Warning indicating that the XFP/OTX transmitter laser bias current is lower than the threshold value written in the XFP/OTX EEPROM <Condtype> TX_BIAS_LOW_WARNING_1 <Probcause> tr… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.29.2.3.1.209.1.4 |
||||
|
Line Transceiver Bias High Warning
:Warning indicating that the XFP/OTX transmitter laser bias current is higher than the threshold value written in the XFP EEPROM <Condtype> TX_BIAS_HIGH_WARNING_1 <Probcause> tra… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.29.2.3.1.209.1.5 |
||||
|
Line Transceiver Temp Low Warning
:Warning indicating that the XFP/OTX temperature is lower than the threshold value written in the XFP/OTX EEPROM <Condtype> TEMP_LOW_WARNING_1 <Probcause> temperatureUnacceptable (… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.29.2.3.1.209.1.8 |
||||
|
Line Transceiver Temp High Warning
:Warning indicating that the XFP/OTX temperature is higher than the threshold value written in the XFP EEPROM <Condtype> TEMP_HIGH_WARNING_1 <Probcause> temperatureUnacceptable (… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.29.2.3.1.209.1.9 |
||||
|
Line Optical Rx Power Low Warning
:Warning indicating that the XFP received optical power is lower than the threshold value written in the XFP EEPROM <Condtype> RX_POWER_LOW_WARNING_1 <Probcause> receiveFailure (4… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.29.2.3.1.209.1.16 |
||||
|
Line Optical Rx Power High Warning
:Warning indicating that the XFP received optical power is higher than the threshold value written in the XFP EEPROM <Condtype> RX_POWER_HIGH_WARNING_1 <Probcause> receiveFailure … |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.29.2.3.1.209.1.17 |
.1.3.6.1.4.1.20044.29.2.3.1.225
·
1 row entry
·
5 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004mAlmlineOtx1TlhWarningsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004m-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004m-MIB::pm1004mAlmlineOtx1TlhWarningsTable'
List of pm1004mAlmlineOtx1TlhWarnings Article
Row definition for the pm1004mAlmlineOtx1TlhWarnings
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm1004mAlmlineOtx1TlhWarnings
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.29.2.3.1.225.1.1 |
||||
|
Line Modulator Aging High Warning
:Warning indicating the Line OTX TLH modulator aging is higher than the threshold written in the EEPROM <Condtype> LINE_MODULATOR_AGING_HIGH_WARNING_1 <Probcause> transmitterFailur… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.29.2.3.1.225.1.6 |
||||
|
Line OTX TLH Aging High Warning
:Warning indicating the Line OTX TLH aging is higher than the threshold written in the EEPROM <Condtype> LINE_AGING_HIGH_WARNING_1 <Probcause> transmitterFailure (56) <Alarmtype> eq… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.29.2.3.1.225.1.7 |
||||
|
Line Freq. Deviation High Warning
:Warning indicating the Line OTX TLH frequency deviation is higher than the threshold written in the EEPROM <Condtype> LINE_FREQ_DEV_HIGH_WARNING_1 <Probcause> transmitterFailure … |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.29.2.3.1.225.1.13 |
||||
|
Line Laser Temp. High Warning
:Warning indicating the Line OTX TLH laser temperature is higher than the threshold written in the EEPROM <Condtype> LINE_LASER_TEMP_HIGH_WARNING_1 <Probcause> temperatureUnacceptable … |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.29.2.3.1.225.1.15 |
pm1004mAlmdfrmBerTable
table.1.3.6.1.4.1.20044.29.2.3.2.129
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004mAlmdfrmBerTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004m-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004m-MIB::pm1004mAlmdfrmBerTable'
List of pm1004mAlmdfrmBer Article
Row definition for the pm1004mAlmdfrmBer
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm1004mAlmdfrmBer
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.29.2.3.2.129.1.1 |
||||
|
Custom Line Signal Degrade :This
OID indicates that the line input signal is DEGRADE. The assertion hysteresis can customized by the host <Condtype> LINE_SIGNAL_DEGRADE_1 <Probcause> degradedSignal (13) <Alarmtype… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.29.2.3.2.129.1.2 |
||||
|
Custom Line Signal Fail :This
OID indicates that the line input signal is FAIL. The assertion hysteresis can be customized by the host <Condtype> LINE_SIGNAL_FAIL_1 <Probcause> receiveFailure (41) <Alarmtype> inte… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.29.2.3.2.129.1.3 |
||||
|
Fixed Line Signal Degrade :This
OID indicates that the line input signal is DEGRADE. The assetion hysteresis is fixed to 10-8 (assertion) and 10-9 (de-assertion) <Condtype> LINE_DEGRADE_1 <Probcause> degradedSignal… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.29.2.3.2.129.1.6 |
.1.3.6.1.4.1.20044.29.2.3.2.208
·
1 row entry
·
9 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004mAlmlineXfp1AlarmTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004m-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004m-MIB::pm1004mAlmlineXfp1AlarmTable'
List of pm1004mAlmlineXfp1Alarm Article
Row definition for the pm1004mAlmlineXfp1Alarm
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm1004mAlmlineXfp1Alarm
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.29.2.3.2.208.1.1 |
||||
|
Line Optical Tx Power Low :Alarm
indicating that the XFP/OTX transmitter transmitter output power is lower than the threshold value written in the XFP/OTX EEPROM <Condtype> TX_POWER_LOW_ALARM_1 <Probcause> transmi… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.29.2.3.2.208.1.2 |
||||
|
Line Optical Tx Power High :Alarm
indicating that the XFP/OTX transmitter transmitter output power is higher than the threshold value written in the XFP EEPROM <Condtype> TX_POWER_HIGH_ALARM_1 <Probcause> transmitt… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.29.2.3.2.208.1.3 |
||||
|
Line Transceiver Bias Low :Alarm
indicating that the XFP/OTX transmitter laser bias current is lower than the threshold value written in the XFP/OTX EEPROM <Condtype> TX_BIAS_LOW_ALARM_1 <Probcause> transmitterFai… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.29.2.3.2.208.1.4 |
||||
|
Line Transceiver Bias High :Alarm
indicating that the XFP/OTX transmitter laser bias current is higher than the threshold value written in the XFP EEPROM <Condtype> TX_BIAS_HIGH_ALARM_1 <Probcause> transmitterFailu… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.29.2.3.2.208.1.5 |
||||
|
Line Transceiver Temp Low :Alarm
indicating that the XFP/OTX temperature is lower than the threshold value written in the XFP/OTX EEPROM <Condtype> TEMP_LOW_ALARM_1 <Probcause> temperatureUnacceptable (51) <Alarmty… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.29.2.3.2.208.1.8 |
||||
|
Line Transceiver Temp High :Alarm
indicating that the XFP/OTX temperature is higher than the threshold value written in the XFP EEPROM <Condtype> TEMP_HIGH_ALARM_1 <Probcause> temperatureUnacceptable (51) <Alarmtyp… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.29.2.3.2.208.1.9 |
||||
|
Line Optical Rx Power Low :Alarm
indicating that the XFP received optical power is lower than the threshold value written in the XFP EEPROM <Condtype> RX_POWER_LOW_ALARM_1 <Probcause> receiveFailure (41) <Alarmty… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.29.2.3.2.208.1.16 |
||||
|
Line Optical Rx Power High :Alarm
indicating that the XFP received optical power is higher than the threshold value written in the XFP EEPROM <Condtype> RX_POWER_HIGH_ALARM_1 <Probcause> receiveFailure (41) <Alarm… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.29.2.3.2.208.1.17 |
.1.3.6.1.4.1.20044.29.2.3.2.212
·
1 row entry
·
17 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004mAlmlineXfp1SupplyAlarmTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004m-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004m-MIB::pm1004mAlmlineXfp1SupplyAlarmTable'
List of pm1004mAlmlineXfp1SupplyAlarm Article
Row definition for the pm1004mAlmlineXfp1SupplyAlarm
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm1004mAlmlineXfp1SupplyAlarm
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.29.2.3.2.212.1.1 |
||||
|
VEE5 Power Supply Low :Alarm indicating
the XFP/OTX VEE5 power supply is lower than the threshold written in the EEPROM <Condtype> VEE5_LOW_ALARM_1 <Probcause> powerProblem (36) <Alarmtype> equipmentAlarm (5) <Pola… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.29.2.3.2.212.1.2 |
||||
|
VEE5 Power Supply High :Alarm
indicating the XFP/OTX VEE5 power supply is higher than the threshold written in the EEPROM <Condtype> VEE5_HIGH_ALARM_1 <Probcause> powerProblem (36) <Alarmtype> equipmentAlarm (5) <… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.29.2.3.2.212.1.3 |
||||
|
VCC2 Power Supply Low :Alarm indicating
the XFP/OTX VCC2 power supply is lower than the threshold written in the EEPROM <Condtype> VCC2_LOW_ALARM_1 <Probcause> powerProblem (36) <Alarmtype> equipmentAlarm (5) <Pola… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.29.2.3.2.212.1.4 |
||||
|
VCC2 Power Supply High :Alarm
indicating the XFP/OTX VCC2 power supply is higher than the threshold written in the EEPROM <Condtype> VCC2_HIGH_ALARM_1 <Probcause> powerProblem (36) <Alarmtype> equipmentAlarm (5) <… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.29.2.3.2.212.1.5 |
||||
|
VCC3 Power Supply Low :Alarm indicating
the XFP/OTX VCC3 power supply is lower than the threshold written in the EEPROM <Condtype> VCC3_LOW_ALARM_1 <Probcause> powerProblem (36) <Alarmtype> equipmentAlarm (5) <Pola… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.29.2.3.2.212.1.6 |
||||
|
VCC3 Power Supply High :Alarm
indicating the XFP/OTX VCC3 power supply is higher than the threshold written in the EEPROM <Condtype> VCC3_HIGH_ALARM_1 <Probcause> powerProblem (36) <Alarmtype> equipmentAlarm (5) <… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.29.2.3.2.212.1.7 |
||||
|
VCC5 Power Supply Low :Alarm indicating
the XFP/OTX VCC5 power supply is lower than the threshold written in the EEPROM <Condtype> VCC5_LOW_ALARM_1 <Probcause> powerProblem (36) <Alarmtype> equipmentAlarm (5) <Pola… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.29.2.3.2.212.1.8 |
||||
|
VCC5 Power Supply High :Alarm
indicating the XFP/OTX VCC5 power supply is higher than the threshold written in the EEPROM <Condtype> VCC5_HIGH_ALARM_1 <Probcause> powerProblem (36) <Alarmtype> equipmentAlarm (5) <… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.29.2.3.2.212.1.9 |
||||
|
VEE5 Power Supply Low Warning
:Warning indicating the XFP/OTX VEE5 power supply is lower than the threshold written in the EEPROM <Condtype> VEE5_LOW_WARNING_1 <Probcause> powerProblem (36) <Alarmtype> equipmentAla… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.29.2.3.2.212.1.10 |
||||
|
VEE5 Power Supply High Warning
:Warning indicating the XFP/OTX VEE5 power supply is higher than the threshold written in the EEPROM <Condtype> VEE5_HIGH_WARNING_1 <Probcause> powerProblem (36) <Alarmtype> equipmen… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.29.2.3.2.212.1.11 |
||||
|
VCC2 Power Supply Low Warning
:Warning indicating the XFP/OTX VCC2 power supply is lower than the threshold written in the EEPROM <Condtype> VCC2_LOW_WARNING_1 <Probcause> powerProblem (36) <Alarmtype> equipmentAla… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.29.2.3.2.212.1.12 |
||||
|
VCC2 Power Supply High Warning
:Warning indicating the XFP/OTX VCC2 power supply is higher than the threshold written in the EEPROM <Condtype> VCC2_HIGH_WARNING_1 <Probcause> powerProblem (36) <Alarmtype> equipmen… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.29.2.3.2.212.1.13 |
||||
|
VCC3 Power Supply Low Warning
:Warning indicating the XFP/OTX VCC3 power supply is lower than the threshold written in the EEPROM <Condtype> VCC3_LOW_WARNING_1 <Probcause> powerProblem (36) <Alarmtype> equipmentAla… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.29.2.3.2.212.1.14 |
||||
|
VCC3 Power Supply High Warning
:Warning indicating the XFP/OTX VCC3 power supply is higher than the threshold written in the EEPROM <Condtype> VCC3_HIGH_WARNING_1 <Probcause> powerProblem (36) <Alarmtype> equipmen… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.29.2.3.2.212.1.15 |
||||
|
VCC5 Power Supply Low Warning
:Warning indicating the XFP/OTX VCC5 power supply is lower than the threshold written in the EEPROM <Condtype> VCC5_LOW_WARNING_1 <Probcause> powerProblem (36) <Alarmtype> equipmentAla… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.29.2.3.2.212.1.16 |
||||
|
VCC5 Power Supply High Warning
:Warning indicating the XFP/OTX VCC5 power supply is higher than the threshold written in the EEPROM <Condtype> VCC5_HIGH_WARNING_1 <Probcause> powerProblem (36) <Alarmtype> equipmen… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.29.2.3.2.212.1.17 |
.1.3.6.1.4.1.20044.29.2.3.2.224
·
1 row entry
·
5 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004mAlmlineOtx1TlhAlarmsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004m-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004m-MIB::pm1004mAlmlineOtx1TlhAlarmsTable'
List of pm1004mAlmlineOtx1TlhAlarms Article
Row definition for the pm1004mAlmlineOtx1TlhAlarms
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm1004mAlmlineOtx1TlhAlarms
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.29.2.3.2.224.1.1 |
||||
|
Line Modulator Aging High Alarm
:Alarm indicating the Line OTX TLH modulator aging is higher than the threshold written in the EEPROM <Condtype> LINE_MODULATOR_AGING_HIGH_ALA_1 <Probcause> transmitterFailure (56) … |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.29.2.3.2.224.1.6 |
||||
|
Line OTX TLH Aging High Alarm
:Alarm indicating the Line OTX TLH aging is higher than the threshold written in the EEPROM <Condtype> LINE_AGING_HIGH_ALA_1 <Probcause> transmitterFailure (56) <Alarmtype> equipmentA… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.29.2.3.2.224.1.7 |
||||
|
Line Freq. Deviation High Alarm
:Alarm indicating the Line OTX TLH frequency deviation is higher than the threshold written in the EEPROM <Condtype> LINE_FREQ_DEV_HIGH_ALA_1 <Probcause> transmitterFailure (56) <Al… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.29.2.3.2.224.1.13 |
||||
|
Line Laser Temp. High Alarm :Alarm
indicating the Line OTX TLH laser temperature is higher than the threshold written in the EEPROM <Condtype> LINE_LASER_TEMP_HIGH_ALA_1 <Probcause> temperatureUnacceptable (51) <A… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.29.2.3.2.224.1.15 |
.1.3.6.1.4.1.20044.29.2.3.3.7
·
1 row entry
·
11 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004mAlmsynthAlmLineTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004m-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004m-MIB::pm1004mAlmsynthAlmLineTable'
List of pm1004mAlmsynthAlmLine Article
Row definition for the pm1004mAlmsynthAlmLine
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm1004mAlmsynthAlmLine
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.29.2.3.3.7.1.1 |
||||
|
Line Optical Module Absent :This
OID indicates that the line optical interface (XFP or OTX) is not plugged in. <Help> This alarm indicates if the line transceiver is present. <Condtype> XFP_ABSENT <Probcause> in… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.29.2.3.3.7.1.2 |
||||
|
Line Optical Module Ready :This
OID indicates that the optical interface (XFP or OTX) is not operational. <Help> This status indicates if the line transceiver has been correctly initialized <Condtype> XFP_INIT_N… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.29.2.3.3.7.1.3 |
||||
|
Line Port HW Failure :This OID
indicates a failure on line port, most probably caused by a HW issue <Condtype> LINE_HW_FAIL <Probcause> equipmentMalfunction (16) <Alarmtype> synthesisAlarm (12) <Polarity> (2) |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.29.2.3.3.7.1.5 |
||||
|
Line Optical Module Laser Shutdown
:This OID indicates the line optical output power is on <Help> This status indicates if the line transceiver laser is ON or OFF <Condtype> XFP_TX_OFF <Probcause> other (1) <Alar… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.29.2.3.3.7.1.6 |
||||
|
Line Port In Service :This OID
indicates that the Line port is In Service (1) of Out or Service (2) <Help> This status indicates if the line port is in service <Condtype> LINE_LOCAL_OOS <Probcause> informational… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.29.2.3.3.7.1.7 |
||||
|
MS-RDI/L-RDI Inserted On Line
:This OID indicates an upstream MS-RDI/L-RDI has been inserted in the outgoing OC192/STM64 signal. <Help> This status indicates if a MS-RDI/L-RDI is currently inserted on the line … |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.29.2.3.3.7.1.9 |
||||
|
Warning On Line Optical Module
DDM :This OID indicates a warning is present coming out of Line optical interface DDM <Help> This alarm indicates if a DDM Warning has been detected on the line transceiver <Condty… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.29.2.3.3.7.1.10 |
||||
|
Alarm On Line Optical Module DDM
:This OID indicates an alarm is present coming out of Line optical interface DDM <Help> This alarm indicates if a DDM Alarm has been detected on the line transceiver <Condtype> L… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.29.2.3.3.7.1.11 |
||||
|
Line Port Failure :This OID indicates
a failure on the line port <Condtype> LINE_FAIL <Probcause> equipmentMalfunction (16) <Alarmtype> synthesisAlarm (12) <Polarity> (2) |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.29.2.3.3.7.1.13 |
||||
|
Line Active :This bit indicates
the line #n is active on receive side <Help> This status indicates whether the line is active or standby. <Condtype> LINE_ACTIVE <Probcause> informationalStatus(1000) <Alarmtype> … |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.29.2.3.3.7.1.17 |
pm1004mAlmdfrmAlmTable
table.1.3.6.1.4.1.20044.29.2.3.3.128
·
1 row entry
·
5 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004mAlmdfrmAlmTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004m-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004m-MIB::pm1004mAlmdfrmAlmTable'
List of pm1004mAlmdfrmAlm Article
Row definition for the pm1004mAlmdfrmAlm
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm1004mAlmdfrmAlm
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.29.2.3.3.128.1.1 |
||||
|
MS-AIS/L-AIS Detected On Line
Input :This OID indicates that an MS-AIS has been detected on the input signal <Help> This alarm indicates if there is a AIS is detected on the line input signal <Condtype> DW_AIS_D… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.29.2.3.3.128.1.2 |
||||
|
MS-RDI/L-RDI Detected On Line
Input :This OID indicates that an MS-RDI has been detected on the input signal <Help> This alarm indicates if there is a RDI is detected on the line input signal <Condtype> DW_RDI_D… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.29.2.3.3.128.1.3 |
||||
|
SONET/SDH Line Out Of Frame :This
OID indicates that an Out Of Frame has been detected on the input signal <Help> This alarm indicates if there is a Out of Frame is detected on the line input signal <Condtype> D… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.29.2.3.3.128.1.4 |
||||
|
SONET/SDH Line Loss Of Frame :This
OID indicates that a Loss Of Frame has been detected on the input signal <Help> This alarm indicates if there is a Loss of Frame is detected on the line input signal <Condtype>… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.29.2.3.3.128.1.5 |
.1.3.6.1.4.1.20044.29.2.3.3.133
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004mAlmlineSyncAlarmsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004m-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004m-MIB::pm1004mAlmlineSyncAlarmsTable'
List of pm1004mAlmlineSyncAlarms Article
Row definition for the pm1004mAlmlineSyncAlarms
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm1004mAlmlineSyncAlarms
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.29.2.3.3.133.1.1 |
||||
|
Downstream Clock Lock Error :This
OID indicates that the deserializer input 10 Gb/s clock recovery is not locked. <Condtype> DW_LOCKERR <Probcause> receiveFailure (41) <Alarmtype> equipmentAlarm (5) <Polarity> (2) |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.29.2.3.3.133.1.13 |
||||
|
Upstream Clock Lock Error :This
OID indicates that the serializer output 10 Gb/s clock multiplier unit is not locked. <Condtype> UP_LOCKERR <Probcause> receiveFailure (41) <Alarmtype> equipmentAlarm (5) <Polarity>… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.29.2.3.3.133.1.14 |
||||
|
Line Input Loss Of Signal :This
OID indicates a loss of signal on the 10 Gb/s input. <Help> This alarm indicates if an optical signal is detected on the line transceiver input <Condtype> DW_LOS <Probcause> recei… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.29.2.3.3.133.1.17 |
.1.3.6.1.4.1.20044.29.2.3.3.211
·
1 row entry
·
10 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004mAlmlineXfp1AlarmsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004m-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004m-MIB::pm1004mAlmlineXfp1AlarmsTable'
List of pm1004mAlmlineXfp1Alarms Article
Row definition for the pm1004mAlmlineXfp1Alarms
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm1004mAlmlineXfp1Alarms
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.29.2.3.3.211.1.1 |
||||
|
Line Optical Module Not Ready
:This OID indicates that the module is unable to determine correct data. <Help> This alarm indicates if the line transceiver is ready <Condtype> MOD_NR_1 <Probcause> receiveFailure … |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.29.2.3.3.211.1.3 |
||||
|
Line Optical Rx CDR Unlocked :This
OID indicates that a loss of lock on the receiving side CDR has been detected <Help> This alarm indicates if the Rx CDR is locked in the line transceiver <Condtype> RX_CDR_NOT_L… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.29.2.3.3.211.1.4 |
||||
|
Line Optical Rx Not Ready :This
OID indicates that a condition has arisen leading to invalid data on the receiving side. <Help> This alarm indicates if the Rx part of the line transceiver is ready <Condtype> RX_… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.29.2.3.3.211.1.6 |
||||
|
Line Optical Tx CDR Unlocked :This
OID indicates a loss of lock on the transmitting side CDR has been detected. <Help> This alarm indicates if the Tx CDR is locked in the line transceiver <Condtype> TX_CDR_NOT_LO… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.29.2.3.3.211.1.7 |
||||
|
Line Optical Tx Failure :This
OID indicates a fault condition on the laser detected by the safety syste <Help> This alarm indicates if the laser of the line transceiver is in fail condition <Condtype> TX_FAULT_1… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.29.2.3.3.211.1.8 |
||||
|
Line Optical Tx Not Ready :This
OID indicates a condition has arisen leading to invalid data on the transmitting side <Help> This alarm indicates if the Tx part of the line transceiver is ready <Condtype> TX_NR_… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.29.2.3.3.211.1.9 |
||||
|
Line Optical Tx Wavelength Unlocked
:This OID indicates that the wavelength error is exceeding the manufacturer tolerance <Help> This alarm indicates if the wavelenght of the line transceiver is locked <Condtype>… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.29.2.3.3.211.1.15 |
||||
|
Line Optical Tx Temp Regul Failed
:This OID indicates a failure on the TEC module <Help> This alarm indicates if the TEC of the line transceiver is in fail condition <Condtype> TEC_FAULT_1 <Probcause> transmitte… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.29.2.3.3.211.1.16 |
||||
|
Line Rx Photodiode Power Failed
:This OID indicates a failure on the APD power supply <Help> This alarm indicates if the APD power supply is in fail condition <Condtype> APD_SUPPLY_FAULT_1 <Probcause> receiverFa… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.29.2.3.3.211.1.17 |
pm1004mMesrtempMeasTable
table.1.3.6.1.4.1.20044.29.3.2.16
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004mMesrtempMeasTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004m-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004m-MIB::pm1004mMesrtempMeasTable'
List of pm1004mMesrtempMeas Article
Row definition for the pm1004mMesrtempMeas
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the pm1004mMesrtempMeas
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.29.3.2.16.1.1 |
|
Client SFP Temperature :This OID
gives the temperature value of the SFP plugged in port, read from the DDM (Digital Diagnostic Monitoring) (Temperature = AV/256) (Unit = C) <Help> This measure gives the tempera… |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.20044.29.3.2.16.1.2 |
pm1004mMesrvoltMeasTable
table.1.3.6.1.4.1.20044.29.3.2.24
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004mMesrvoltMeasTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004m-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004m-MIB::pm1004mMesrvoltMeasTable'
List of pm1004mMesrvoltMeas Article
Row definition for the pm1004mMesrvoltMeas
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the pm1004mMesrvoltMeas
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.29.3.2.24.1.1 |
|
Client SFP Power Supply :This
OID gives the 3V3 voltage value of the SFP plugged into port, read from the DDM (Digital Diagnostic Monitoring) (Voltage = AV/10000) (Unit = V) <Help> This measure gives the 3V3 vo… |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.20044.29.3.2.24.1.2 |
pm1004mMesrbiasMeasTable
table.1.3.6.1.4.1.20044.29.3.2.32
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004mMesrbiasMeasTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004m-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004m-MIB::pm1004mMesrbiasMeasTable'
List of pm1004mMesrbiasMeas Article
Row definition for the pm1004mMesrbiasMeas
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the pm1004mMesrbiasMeas
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.29.3.2.32.1.1 |
|
Client SFP Laser Bias :This OID
gives the bias value of the SFP plugged into port, read from the DDM (Digital Diagnostic Monitoring) (Bias = AV/500) (Unit = mA) <Help> This measure gives the bias of the client … |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.20044.29.3.2.32.1.2 |
.1.3.6.1.4.1.20044.29.3.2.40
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004mMesrtxpwrMeasTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004m-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004m-MIB::pm1004mMesrtxpwrMeasTable'
List of pm1004mMesrtxpwrMeas Article
Row definition for the pm1004mMesrtxpwrMeas
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the pm1004mMesrtxpwrMeas
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.29.3.2.40.1.1 |
|
Client SFP Tx Power :This OID
gives the transmit power value of the SFP plugged into port, read from the DDM (Digital Diagnostic Monitoring) (Power = 10*log(AV)-40) (Unit = dBm) <Help> This measure gives the Tx … |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.20044.29.3.2.40.1.2 |
.1.3.6.1.4.1.20044.29.3.2.48
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004mMesrrxpwrMeasTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004m-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004m-MIB::pm1004mMesrrxpwrMeasTable'
List of pm1004mMesrrxpwrMeas Article
Row definition for the pm1004mMesrrxpwrMeas
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the pm1004mMesrrxpwrMeas
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.29.3.2.48.1.1 |
|
Client SFP Rx Power :This OID
gives the receive power value of the SFP plugged into port, read in the DDM (Digital Diagnostic Monitoring) (Power = 10*log(AV)-40) (Unit = dBm) <Help> This measure gives the Rx opt… |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.20044.29.3.2.48.1.2 |
.1.3.6.1.4.1.20044.29.3.3.208
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004mMesrxfp1LxModTempMeasTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004m-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004m-MIB::pm1004mMesrxfp1LxModTempMeasTable'
List of pm1004mMesrxfp1LxModTempMeas Article
Row definition for the pm1004mMesrxfp1LxModTempMeas
table
table
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the pm1004mMesrxfp1LxModTempMeas
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.29.3.3.208.1.1 |
|
Line Optical Module Temperature
:This OID gives the temperature of the XFP or OTX plugged in line, read from the DDM (Digital Diagnostic Monitoring) (Temperature = AV/256) (Unit = C) <Help> This measure gives th… |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.20044.29.3.3.208.1.2 |
.1.3.6.1.4.1.20044.29.3.3.209
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004mMesrxfp1ReservedTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004m-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004m-MIB::pm1004mMesrxfp1ReservedTable'
List of pm1004mMesrxfp1Reserved Article
Row definition for the pm1004mMesrxfp1Reserved
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
pm1004mMesrxfp1ReservedIndexdeprecated
Index definition for the pm1004mMesrxfp1Reserved
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.29.3.3.209.1.1 |
|
pm1004mMesrxfp1ReservedPortndeprecated
Not Used :Reserved
|
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.20044.29.3.3.209.1.2 |
.1.3.6.1.4.1.20044.29.3.3.210
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004mMesrxfp1LoBiasCurrentMeasTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004m-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004m-MIB::pm1004mMesrxfp1LoBiasCurrentMeasTable'
List of pm1004mMesrxfp1LoBiasCurrentMeas Article
Row definition for the pm1004mMesrxfp1LoBiasCurrentMeas
table
table
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the pm1004mMesrxfp1LoBiasCurrentMeas
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.29.3.3.210.1.1 |
|
Line Optical Module Laser Bias
:This OID gives the bias value of the XFP or OTX plugged in line , read from the DDM (Digital Diagnostic Monitoring) (Bias = AV/500) (Unit = mA) <Help> This measure gives the bias … |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.20044.29.3.3.210.1.2 |
.1.3.6.1.4.1.20044.29.3.3.211
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004mMesrxfp1LoTxPowerMeasTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004m-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004m-MIB::pm1004mMesrxfp1LoTxPowerMeasTable'
List of pm1004mMesrxfp1LoTxPowerMeas Article
Row definition for the pm1004mMesrxfp1LoTxPowerMeas
table
table
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the pm1004mMesrxfp1LoTxPowerMeas
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.29.3.3.211.1.1 |
|
Line Optical Module Tx Power :This
OID gives the transmit power value of the XFP or OTX plugged in line , read from the DDM (Digital Diagnostic Monitoring) (Power = 10*log(AV)-40) (Unit = dBm) <Help> This meas… |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.20044.29.3.3.211.1.2 |
.1.3.6.1.4.1.20044.29.3.3.212
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004mMesrxfp1LiRxPowerMeasTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004m-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004m-MIB::pm1004mMesrxfp1LiRxPowerMeasTable'
List of pm1004mMesrxfp1LiRxPowerMeas Article
Row definition for the pm1004mMesrxfp1LiRxPowerMeas
table
table
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the pm1004mMesrxfp1LiRxPowerMeas
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.29.3.3.212.1.1 |
|
Line Optical Module Rx Power :This
OID gives the receive power value of the XFP or OTX plugged in line , read from the DDM (Digital Diagnostic Monitoring) (Power = 10*log(AV)-40) (Unit = dBm) <Help> This measure … |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.20044.29.3.3.212.1.2 |
.1.3.6.1.4.1.20044.29.3.3.213
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004mMesrxfp1LxAux1MeasTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004m-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004m-MIB::pm1004mMesrxfp1LxAux1MeasTable'
List of pm1004mMesrxfp1LxAux1Meas Article
Row definition for the pm1004mMesrxfp1LxAux1Meas
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
pm1004mMesrxfp1LxAux1MeasIndexdeprecated
Index definition for the pm1004mMesrxfp1LxAux1Meas
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.29.3.3.213.1.1 |
|
pm1004mMesrxfp1LxAux1MeasPortndeprecated
Not Used :This OID gives the receive
power value read in the DDM (Digital Diagnostic Monitoring) of the XFP or OTX plugged in line (Unit = ?) |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.20044.29.3.3.213.1.2 |
.1.3.6.1.4.1.20044.29.3.3.214
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004mMesrxfp1LxAux2MeasTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004m-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004m-MIB::pm1004mMesrxfp1LxAux2MeasTable'
List of pm1004mMesrxfp1LxAux2Meas Article
Row definition for the pm1004mMesrxfp1LxAux2Meas
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
pm1004mMesrxfp1LxAux2MeasIndexdeprecated
Index definition for the pm1004mMesrxfp1LxAux2Meas
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.29.3.3.214.1.1 |
|
pm1004mMesrxfp1LxAux2MeasPortndeprecated
Not Used :This OID gives the receive
power value read in the DDM (Digital Diagnostic Monitoring) of the XFP or OTX plugged in line (Unit = ?) |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.20044.29.3.3.214.1.2 |
.1.3.6.1.4.1.20044.29.3.3.224
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004mMesrotx1AgingTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004m-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004m-MIB::pm1004mMesrotx1AgingTable'
List of pm1004mMesrotx1Aging Article
Row definition for the pm1004mMesrotx1Aging
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the pm1004mMesrotx1Aging
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.29.3.3.224.1.1 |
|
Line OTX TLH Aging :This OID gives
the aging of the Line OTX TLH, read from the DDM (Digital Diagnostic Monitoring) (Aging = AV) (Unit = %) <Help> This measure gives the aging of the Line OTX TLH |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.20044.29.3.3.224.1.2 |
.1.3.6.1.4.1.20044.29.3.3.225
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004mMesrotx1LaserTemperatureTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004m-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004m-MIB::pm1004mMesrotx1LaserTemperatureTable'
List of pm1004mMesrotx1LaserTemperature Article
Row definition for the pm1004mMesrotx1LaserTemperature
table
table
| Column | Syntax | OID |
|---|---|---|
|
pm1004mMesrotx1LaserTemperatureIndexdeprecated
Index definition for the pm1004mMesrotx1LaserTemperature
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.29.3.3.225.1.1 |
|
pm1004mMesrotx1LaserTemperaturePortndeprecated
Line OTX TLH Laser Temperature
:This OID gives the laser temperature of the Line OTX TLH, read from the DDM (Digital Diagnostic Monitoring) (Temperature = AV/256) (Unit = C) <Help> This measure gives the laser … |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.20044.29.3.3.225.1.2 |
.1.3.6.1.4.1.20044.29.3.3.226
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004mMesrotx1FreqDeviationTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004m-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004m-MIB::pm1004mMesrotx1FreqDeviationTable'
List of pm1004mMesrotx1FreqDeviation Article
Row definition for the pm1004mMesrotx1FreqDeviation
table
table
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the pm1004mMesrotx1FreqDeviation
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.29.3.3.226.1.1 |
|
Line OTX TLH Frequency Deviation
:This OID gives the frequency deviation of the Line OTX TLH, read from the DDM (Digital Diagnostic Monitoring) (Deviation = (AV-32768)*100) (Unit = MHz) <Help> This measure gives… |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.20044.29.3.3.226.1.2 |
.1.3.6.1.4.1.20044.29.3.3.227
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004mMesrotx1LaserWvlengthTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004m-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004m-MIB::pm1004mMesrotx1LaserWvlengthTable'
List of pm1004mMesrotx1LaserWvlength Article
Row definition for the pm1004mMesrotx1LaserWvlength
table
table
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the pm1004mMesrotx1LaserWvlength
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.29.3.3.227.1.1 |
|
Line Optical Module Wavelength
:This OID gives the laser wavelength of the Line OTX TLH, read from the DDM (Digital Diagnostic Monitoring) (Wavelength=299792458/((193,100+(AV-32768 )*12,5)*10 3)) (Unit = nm) <Hel… |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.20044.29.3.3.227.1.2 |
.1.3.6.1.4.1.20044.29.4.2.16
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004mCntupRaRemCntTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004m-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004m-MIB::pm1004mCntupRaRemCntTable'
List of pm1004mCntupRaRemCnt Article
Row definition for the pm1004mCntupRaRemCnt
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm1004mCntupRaRemCnt
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.29.4.2.16.1.1 |
||||
|
Client Rate Adapt. Words Removal
:This counter is incremented each time a rate adaptation 10B word is removed from the Client input stream |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.29.4.2.16.1.2 |
||||
|
Client Counter Error :This OID
when set indicates the rate adaptation removal counter value is invalid on Port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.29.4.2.16.1.3 |
||||
|
Client Counter Overload :This
OID when set indicates a rate adaptation removal counter overload on Port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.29.4.2.16.1.4 |
.1.3.6.1.4.1.20044.29.4.2.24
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004mCntupRaInsCntTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004m-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004m-MIB::pm1004mCntupRaInsCntTable'
List of pm1004mCntupRaInsCnt Article
Row definition for the pm1004mCntupRaInsCnt
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm1004mCntupRaInsCnt
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.29.4.2.24.1.1 |
||||
|
Client Rate Adapt. Words Insertion
:This counter is incremented each time a rate adaptation 10B word is inserted in the Client input stream |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.29.4.2.24.1.2 |
||||
|
Client Counter Error :This OID
when set indicates the rate adaptation insertion counter value is invalid on Port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.29.4.2.24.1.3 |
||||
|
Client Counter Overload :This
OID when set indicates a rate adaptation insertion counter overload on Port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.29.4.2.24.1.4 |
.1.3.6.1.4.1.20044.29.4.2.32
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004mCntupRdErrCntTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004m-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004m-MIB::pm1004mCntupRdErrCntTable'
List of pm1004mCntupRdErrCnt Article
Row definition for the pm1004mCntupRdErrCnt
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm1004mCntupRdErrCnt
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.29.4.2.32.1.1 |
||||
|
Client Input Errors :This counter
is increased each time a 10b/8b running disparity error is detected on the Client input stream <Help> This counter gives the number of B1 errors on the client input port |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.29.4.2.32.1.2 |
||||
|
Client Counter Error :This OID
when set indicates the client error counter value is invalid on Port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.29.4.2.32.1.3 |
||||
|
Client Counter Overload :This
OID when set indicates a client input error counter overload on Port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.29.4.2.32.1.4 |
pm1004mCntupTimCntTable
table.1.3.6.1.4.1.20044.29.4.2.40
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004mCntupTimCntTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004m-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004m-MIB::pm1004mCntupTimCntTable'
List of pm1004mCntupTimCnt Article
Row definition for the pm1004mCntupTimCnt
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm1004mCntupTimCnt
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.29.4.2.40.1.1 |
||||
|
Client Upstream Timer Counter
:This is the timing counter dedicated to the upstream access counters. It is incremented every 125 us. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.29.4.2.40.1.2 |
||||
|
Client Counter Error :This OID
when set indicates the upstream timing counter value is invalid on Port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.29.4.2.40.1.3 |
||||
|
Client Counter Overload :This
OID when set indicates a upstream timing counter overload on Port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.29.4.2.40.1.4 |
.1.3.6.1.4.1.20044.29.4.2.48
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004mCntupCvErrCntTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004m-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004m-MIB::pm1004mCntupCvErrCntTable'
List of pm1004mCntupCvErrCnt Article
Row definition for the pm1004mCntupCvErrCnt
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm1004mCntupCvErrCnt
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.29.4.2.48.1.1 |
||||
|
Client Coding Violation Counter
:This counter is increased each time a 10b/8b coding violation is detected on the Client input stream |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.29.4.2.48.1.2 |
||||
|
Client Counter Error :This OID
when set indicates the coding violation counter value is invalid on Port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.29.4.2.48.1.3 |
||||
|
Client Counter Overload :This
OID when set indicates a coding violation counter overload on Port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.29.4.2.48.1.4 |
pm1004mCntdwTimCntTable
table.1.3.6.1.4.1.20044.29.4.2.72
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004mCntdwTimCntTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004m-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004m-MIB::pm1004mCntdwTimCntTable'
List of pm1004mCntdwTimCnt Article
Row definition for the pm1004mCntdwTimCnt
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm1004mCntdwTimCnt
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.29.4.2.72.1.1 |
||||
|
Client Downstream Timer Counter
:This is the timing counter dedicated to the downstream access counters. It is incremented every 125 us. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.29.4.2.72.1.2 |
||||
|
Client Counter Error :This OID
when set indicates the downstream timer counter value is invalid on Port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.29.4.2.72.1.3 |
||||
|
Client Counter Overload :This
OID when set indicates a downstream timer counter overload on Port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.29.4.2.72.1.4 |
.1.3.6.1.4.1.20044.29.4.3.152
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004mCntdfrmB1ErrCntTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004m-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004m-MIB::pm1004mCntdfrmB1ErrCntTable'
List of pm1004mCntdfrmB1ErrCnt Article
Row definition for the pm1004mCntdfrmB1ErrCnt
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm1004mCntdfrmB1ErrCnt
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.29.4.3.152.1.1 |
||||
|
Line Input B1 Errors :This counter
is incremented each time a SM BIP error is detected on the Deframer input stream. <Help> This counter gives the number of BIP8 errors on the line port |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.29.4.3.152.1.2 |
||||
|
Line Counter Error :This OID when
set indicates the SM BIP error counter value is invalid on Port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.29.4.3.152.1.3 |
||||
|
Line Counter Overload :This OID
when set indicates a SM BIP error counter overload on Port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.29.4.3.152.1.4 |
.1.3.6.1.4.1.20044.29.4.3.153
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004mCntdfrmTimCntTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004m-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004m-MIB::pm1004mCntdfrmTimCntTable'
List of pm1004mCntdfrmTimCnt Article
Row definition for the pm1004mCntdfrmTimCnt
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm1004mCntdfrmTimCnt
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.29.4.3.153.1.1 |
||||
|
Line Timer Counter :This is the
timing counter dedicated to the downstream deframer counters. It is incremented every 125 us. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.29.4.3.153.1.2 |
||||
|
Line Counter Error :This OID when
set indicates the deframer timer counter value is invalid on Port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.29.4.3.153.1.3 |
||||
|
Line Counter Overload :This OID
when set indicates a deframer timer counter overload on Port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.29.4.3.153.1.4 |
.1.3.6.1.4.1.20044.29.6.2.16
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004mCtrlaccessLoopTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004m-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004m-MIB::pm1004mCtrlaccessLoopTable'
List of pm1004mCtrlaccessLoop Article
Row definition for the pm1004mCtrlaccessLoop
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm1004mCtrlaccessLoop
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.29.6.2.16.1.1 |
||||
|
Client Facility Loopback :This
OID operates a Client Facility Loopback, looping client input signal on the client output port. The loop is located on the client transceiver <Help> This maintenance parameter opera… |
EKINOPS-MIBEkiStater/w Type Values:
|
.1.3.6.1.4.1.20044.29.6.2.16.1.2 |
.1.3.6.1.4.1.20044.29.6.2.18
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004mCtrlportOosModeTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004m-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004m-MIB::pm1004mCtrlportOosModeTable'
List of pm1004mCtrlportOosMode Article
Row definition for the pm1004mCtrlportOosMode
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm1004mCtrlportOosMode
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.29.6.2.18.1.1 |
||||
|
Client Port Out Of Service :This
OID sets the client port Out Of Service <Help> This controls defines the service state of the client port |
EKINOPS-MIBEkiStater/w Type Values:
|
.1.3.6.1.4.1.20044.29.6.2.18.1.2 |
.1.3.6.1.4.1.20044.29.6.2.19
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004mCtrlsfpOnCtrlTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004m-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004m-MIB::pm1004mCtrlsfpOnCtrlTable'
List of pm1004mCtrlsfpOnCtrl Article
Row definition for the pm1004mCtrlsfpOnCtrl
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm1004mCtrlsfpOnCtrl
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.29.6.2.19.1.1 |
||||
|
Client SFP Optical Laser ON :This
OID switches on the SFP. |
EKINOPS-MIBEkiStater/w Type Values:
|
.1.3.6.1.4.1.20044.29.6.2.19.1.2 |
.1.3.6.1.4.1.20044.29.6.2.20
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004mCtrlsfpOffCtrlTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004m-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004m-MIB::pm1004mCtrlsfpOffCtrlTable'
List of pm1004mCtrlsfpOffCtrl Article
Row definition for the pm1004mCtrlsfpOffCtrl
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm1004mCtrlsfpOffCtrl
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.29.6.2.20.1.1 |
||||
|
Client SFP Laser Shutdown :This
OID switches off the SFP. <Help> This control defines the laser state of the client transceiver |
EKINOPS-MIBEkiStater/w Type Values:
|
.1.3.6.1.4.1.20044.29.6.2.20.1.2 |
pm1004mCtrlcsfUpInsTable
table.1.3.6.1.4.1.20044.29.6.2.21
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004mCtrlcsfUpInsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004m-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004m-MIB::pm1004mCtrlcsfUpInsTable'
List of pm1004mCtrlcsfUpIns Article
Row definition for the pm1004mCtrlcsfUpIns
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm1004mCtrlcsfUpIns
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.29.6.2.21.1.1 |
||||
|
Client Signal Fail Insertion :This
OID, when set, inserts a client signal fail in the upstream client Port. <Help> This control inserts a Client Signal Fail for the client port |
EKINOPS-MIBEkiStater/w Type Values:
|
.1.3.6.1.4.1.20044.29.6.2.21.1.2 |
.1.3.6.1.4.1.20044.29.6.2.22
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004mCtrlcaisDwInsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004m-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004m-MIB::pm1004mCtrlcaisDwInsTable'
List of pm1004mCtrlcaisDwIns Article
Row definition for the pm1004mCtrlcaisDwIns
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm1004mCtrlcaisDwIns
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.29.6.2.22.1.1 |
||||
|
Client AIS Insertion :This OID,
when set, inserts a client AIS on the downstream client Port. <Help> This control inserts a Client AIS for the client port |
EKINOPS-MIBEkiStater/w Type Values:
|
.1.3.6.1.4.1.20044.29.6.2.22.1.2 |
.1.3.6.1.4.1.20044.29.6.2.26
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004mCtrlclientAccessTermLoopTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004m-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004m-MIB::pm1004mCtrlclientAccessTermLoopTable'
List of pm1004mCtrlclientAccessTermLoop Article
Row definition for the pm1004mCtrlclientAccessTermLoop
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm1004mCtrlclientAccessTermLoop
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.29.6.2.26.1.1 |
||||
|
Client Terminal Loopback :This
OID operates a Client Terminal Loopback, looping client input signal on the client output port. The loop is located on the line transceiver <Help> This maintenance parameter operate… |
EKINOPS-MIBEkiStater/w Type Values:
|
.1.3.6.1.4.1.20044.29.6.2.26.1.2 |
.1.3.6.1.4.1.20044.29.6.2.35
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004mCtrlresetCount15PortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004m-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004m-MIB::pm1004mCtrlresetCount15PortTable'
List of pm1004mCtrlresetCount15Port Article
Row definition for the pm1004mCtrlresetCount15Port
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm1004mCtrlresetCount15Port
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.29.6.2.35.1.1 |
||||
|
Client 15-min Counters Reset :This
OID resets all the current 15-min Counters on the client port |
EKINOPS-MIBEkiStater/w Type Values:
|
.1.3.6.1.4.1.20044.29.6.2.35.1.2 |
.1.3.6.1.4.1.20044.29.6.2.36
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004mCtrlresetCount24PortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004m-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004m-MIB::pm1004mCtrlresetCount24PortTable'
List of pm1004mCtrlresetCount24Port Article
Row definition for the pm1004mCtrlresetCount24Port
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm1004mCtrlresetCount24Port
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.29.6.2.36.1.1 |
||||
|
Client 24-hours Counters Reset
:This OID resets all the current 24-hours Counters on the client port |
EKINOPS-MIBEkiStater/w Type Values:
|
.1.3.6.1.4.1.20044.29.6.2.36.1.2 |
.1.3.6.1.4.1.20044.29.6.3.74
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004mCtrllineOosModeTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004m-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004m-MIB::pm1004mCtrllineOosModeTable'
List of pm1004mCtrllineOosMode Article
Row definition for the pm1004mCtrllineOosMode
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm1004mCtrllineOosMode
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.29.6.3.74.1.1 |
||||
|
Line Port Out Of Service :This
OID sets the line port Out Of Service <Help> This control defines the service state of the line port |
EKINOPS-MIBEkiStater/w Type Values:
|
.1.3.6.1.4.1.20044.29.6.3.74.1.2 |
.1.3.6.1.4.1.20044.29.6.3.86
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004mCtrllineResetCount15LineTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004m-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004m-MIB::pm1004mCtrllineResetCount15LineTable'
List of pm1004mCtrllineResetCount15Line Article
Row definition for the pm1004mCtrllineResetCount15Line
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm1004mCtrllineResetCount15Line
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.29.6.3.86.1.1 |
||||
|
Line 15-min Counters Reset :This
OID resets all the current 15-min Counters on the client port |
EKINOPS-MIBEkiStater/w Type Values:
|
.1.3.6.1.4.1.20044.29.6.3.86.1.2 |
.1.3.6.1.4.1.20044.29.6.3.87
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004mCtrllineResetCount24LineTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004m-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004m-MIB::pm1004mCtrllineResetCount24LineTable'
List of pm1004mCtrllineResetCount24Line Article
Row definition for the pm1004mCtrllineResetCount24Line
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm1004mCtrllineResetCount24Line
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.29.6.3.87.1.1 |
||||
|
Line 24-hours Counters Reset :This
OID resets all the current 24-hours Counters on the client port |
EKINOPS-MIBEkiStater/w Type Values:
|
.1.3.6.1.4.1.20044.29.6.3.87.1.2 |
pm1004mCtrlxfpOnoffTable
table.1.3.6.1.4.1.20044.29.6.3.208
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004mCtrlxfpOnoffTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004m-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004m-MIB::pm1004mCtrlxfpOnoffTable'
List of pm1004mCtrlxfpOnoff Article
Row definition for the pm1004mCtrlxfpOnoff
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm1004mCtrlxfpOnoff
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.29.6.3.208.1.1 |
||||
|
Line Optical Laser Shutdown :This
OID switches off the XFP or the OTX <Help> This control defines the laser state of the line transceiver |
EKINOPS-MIBEkiStater/w Type Values:
|
.1.3.6.1.4.1.20044.29.6.3.208.1.2 |
.1.3.6.1.4.1.20044.29.6.3.209
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004mCtrlxfpLineLoopTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004m-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004m-MIB::pm1004mCtrlxfpLineLoopTable'
List of pm1004mCtrlxfpLineLoop Article
Row definition for the pm1004mCtrlxfpLineLoop
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm1004mCtrlxfpLineLoop
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.29.6.3.209.1.1 |
||||
|
Line Facility Loopback :This OID
operates a Line Facility Loopback, looping line input signal on the line output port. The loop is located on the line transceiver. If the Line signal carries DCC, the management ne… |
EKINOPS-MIBEkiStater/w Type Values:
|
.1.3.6.1.4.1.20044.29.6.3.209.1.2 |
.1.3.6.1.4.1.20044.29.6.3.210
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004mCtrlxfpXfiLoopTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004m-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004m-MIB::pm1004mCtrlxfpXfiLoopTable'
List of pm1004mCtrlxfpXfiLoop Article
Row definition for the pm1004mCtrlxfpXfiLoop
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm1004mCtrlxfpXfiLoop
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.29.6.3.210.1.1 |
||||
|
Line Terminal Loopback :This OID
operates a Line Terminal Loopback, looping line input signal on the line output port. The loop is located on all client transceivers <Help> This maintenance parameter operates a L… |
EKINOPS-MIBEkiStater/w Type Values:
|
.1.3.6.1.4.1.20044.29.6.3.210.1.2 |
.1.3.6.1.4.1.20044.29.6.3.212
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004mCtrllineTunableChannelTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004m-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004m-MIB::pm1004mCtrllineTunableChannelTable'
List of pm1004mCtrllineTunableChannel Article
Row definition for the pm1004mCtrllineTunableChannel
table
table
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the pm1004mCtrllineTunableChannel
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.29.6.3.212.1.1 |
|
ITU Channel :This OID selects
the ITU channel of the Line OTX TLH Laser <Help> This control defines the ITU channel of the Line OTX TLH Laser |
r/w | .1.3.6.1.4.1.20044.29.6.3.212.1.2 |
.1.3.6.1.4.1.20044.29.6.3.213
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004mCtrllinePhotodiodeModeTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004m-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004m-MIB::pm1004mCtrllinePhotodiodeModeTable'
List of pm1004mCtrllinePhotodiodeMode Article
Row definition for the pm1004mCtrllinePhotodiodeMode
table
table
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the pm1004mCtrllinePhotodiodeMode
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.29.6.3.213.1.1 |
|
OTX TLH Rx Sens. Mode :This OID
defines the Rx sensiblity mode of the Line OTX TLH <Help> This control defines the receiver sensibility mode of the Line OTX TLH Laser (OTX60, OTX80 or Custom) |
r/w | .1.3.6.1.4.1.20044.29.6.3.213.1.2 |
.1.3.6.1.4.1.20044.29.6.3.214
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004mCtrllinePhotodiodeValueTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004m-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004m-MIB::pm1004mCtrllinePhotodiodeValueTable'
List of pm1004mCtrllinePhotodiodeValue Article
Row definition for the pm1004mCtrllinePhotodiodeValue
table
table
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the pm1004mCtrllinePhotodiodeValue
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.29.6.3.214.1.1 |
|
OTX TLH Rx Sensibility :This OID
sets the Rx sensibility of the Line OTX TLH (custom mode only) <Help> This control defines the receiver sensibility value (only in Custom mode) of the Line OTX TLH Laser |
r/w | .1.3.6.1.4.1.20044.29.6.3.214.1.2 |
.1.3.6.1.4.1.20044.29.6.3.215
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004mCtrllinePowerLaserTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004m-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004m-MIB::pm1004mCtrllinePowerLaserTable'
List of pm1004mCtrllinePowerLaser Article
Row definition for the pm1004mCtrllinePowerLaser
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the pm1004mCtrllinePowerLaser
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.29.6.3.215.1.1 |
|
Line Laser Output Power [3-5]
:This OID sets the output power value on the laser of the Line OTX TLH (AV=Power*10+158) (Unit = dBm) <Help> This control defines the start-up output power of the Line OTX TLH |
Integer32r/w Constraints: range: 0-255 |
.1.3.6.1.4.1.20044.29.6.3.215.1.2 |
pm1004mRinvSfpTable
table.1.3.6.1.4.1.20044.29.7.1.1
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004mRinvSfpTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004m-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004m-MIB::pm1004mRinvSfpTable'
List of the SFPs on the selected module
Row definition for the SFP table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index for SFP table
|
Integer32 Constraints: range: 1-16 |
.1.3.6.1.4.1.20044.29.7.1.1.1.1 |
|
Inventory for the SFP: This OID contains the inventory for the SFP
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.20044.29.7.1.1.1.2 |
pm1004mRinvLineTable
table.1.3.6.1.4.1.20044.29.7.1.2
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004mRinvLineTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004m-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004m-MIB::pm1004mRinvLineTable'
List of the XFPs on the selected module
Row definition for the XFP table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index for XFP table
|
Integer32 Constraints: range: 1-16 |
.1.3.6.1.4.1.20044.29.7.1.2.1.1 |
|
Inventory for the XFP: This OID contains the inventory for the XFP
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.20044.29.7.1.2.1.2 |
.1.3.6.1.4.1.20044.29.9.1.1
·
1 row entry
·
10 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004mCfgClientcaiscsfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004m-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004m-MIB::pm1004mCfgClientcaiscsfTable'
List of Article
Row definition for the accessCAisCsf
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the clientcaiscsf
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.29.9.1.1.1.1 |
|
CAIS mode on Client Port :This
register enables/disables port laser shutdown on CAIS insertion condition |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.29.9.1.1.1.3 |
|
CSF contributors on Client Port
:This register configures the contributors to upstream CSF insertion on the port. |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.29.9.1.1.1.9 |
|
CSF contributors on Client Port
:This register configures the contributors to upstream CSF insertion on the port. |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.29.9.1.1.1.10 |
|
CSF contributors on Client Port
:This register selects the contributors of SDH register to upstream CAIS/CSF on Port |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.29.9.1.1.1.11 |
|
CAIS contributors on Client Port
:This register configures the contributors to downstream CAIS insertion on port. |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.29.9.1.1.1.17 |
|
CAIS contributors on Client Port
:This register configures the contributors to downstream CAIS insertion on port. |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.29.9.1.1.1.18 |
|
CAIS contributors on Client Port
:This register configures the contributors to downstream CAIS insertion on port. |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.29.9.1.1.1.19 |
|
pm1004mCfgDownLineSyncAlarmsPortndeprecated
CAIS contributors on Client Port
:This register configures the contributors to downstream CAIS insertion on port. |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.29.9.1.1.1.20 |
|
CAIS contributors on Client Port
:This register selects the contributors of SDH register to downstream CAIS/CSF on Port |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.29.9.1.1.1.21 |
.1.3.6.1.4.1.20044.29.9.2.1
·
1 row entry
·
3 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004mCfgClientStartupTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004m-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004m-MIB::pm1004mCfgClientStartupTable'
List of Article
Row definition for the startup
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the clientStartup
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.29.9.2.1.1.1 |
|
Default Settings on Client Port
:This register configures the default initialisation settings on the port. |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.29.9.2.1.1.3 |
|
Default Protocol on Client Port
:This register configures the default initialisation protocol on the port. |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.29.9.2.1.1.4 |
pm1004mCfgXfpTable
table.1.3.6.1.4.1.20044.29.9.2.3
·
1 row entry
·
3 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004mCfgXfpTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004m-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004m-MIB::pm1004mCfgXfpTable'
List of Article
Row definition for the startup
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the xfp table
|
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.29.9.2.3.1.1 |
|
Default settings on XFP Port :This
register configures the default initialisation settings on XFP port. |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.29.9.2.3.1.3 |
|
pm1004mCfgDataRateConfXfpPortndeprecated
:Reserved
|
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.29.9.2.3.1.4 |
.1.3.6.1.4.1.20044.29.9.3.1
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004mCfgLabelclientTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004m-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004m-MIB::pm1004mCfgLabelclientTable'
List of Article
Row definition for the labels
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the labelclient
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.29.9.3.1.1.1 |
|
Default settings on the label
of the Ports :These registers configures the default initialisation settings of the labels of the ports. |
SNMPv2-TCDisplayStringr/w Constraints: range: 1-16Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.20044.29.9.3.1.1.3 |
pm1004mCfgLabellineTable
table.1.3.6.1.4.1.20044.29.9.3.2
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004mCfgLabellineTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004m-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004m-MIB::pm1004mCfgLabellineTable'
List of Article
Row definition for the labels
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the labelline
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.29.9.3.2.1.1 |
|
Default settings on the label
of the lines :These registers configures the default initialisation settings of the labels of the lines. |
SNMPv2-TCDisplayStringr/w Constraints: range: 1-16Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.20044.29.9.3.2.1.3 |
pm1004mCfgEmptyTable
table.1.3.6.1.4.1.20044.29.9.5.1
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004mCfgEmptyTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004m-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004m-MIB::pm1004mCfgEmptyTable'
List of Article
Row definition for the j0Client
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the empty
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.29.9.5.1.1.1 |
|
Expected Trace Identifier mode
:This register configures the Expected Trace Identifier Mode (single byte, 16 bytes with CRC7, 64 bytes with CRC7 or 64 bytes with CR/LF terminaison) |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.29.9.5.1.1.3 |
pm1004mCfgOtxtlhTable
table.1.3.6.1.4.1.20044.29.9.6.1
·
1 row entry
·
11 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004mCfgOtxtlhTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004m-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004m-MIB::pm1004mCfgOtxtlhTable'
List of Article
Row definition for the startuptlh
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the otxtlh
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.29.9.6.1.1.1 |
|
pm1004mCfgNuPortndeprecated
:
|
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.29.9.6.1.1.3 |
|
Default Line OTX TLH FM amplitude
:This register configures the start-up width of the frequency modulation of the Line OTX TLH |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.29.9.6.1.1.4 |
|
Default Line OTX TLH FM frequency
:This register configures the start-up frequency of the frequency modulation of the Line OTX TLH |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.29.9.6.1.1.5 |
|
Defaut Line OTX TLH output Power
:This register configures the start-up output power of the Line OTX TLH (Unit = dBm) |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.29.9.6.1.1.6 |
|
Default Line OTX TLH Channel :This
register configures the start-up laser channel of the Line OTX TLH |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.29.9.6.1.1.7 |
|
Default Line OTX TLH Grid :This
register configures the start-up laser grid of the Line OTX TLH |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.29.9.6.1.1.8 |
|
Default Line OTX TLH lowest Freq
:This register configures the start-up lowest frequency supported on the Line OTX TLH |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.29.9.6.1.1.9 |
|
pm1004mCfgReservedPortndeprecated
:
|
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.29.9.6.1.1.10 |
|
Default Line OTX TLH APD mode
:This register configures the start-up APD mode of the Line OTX TLH |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.29.9.6.1.1.11 |
|
Default Line OTX TLH APD atten.
:This register configures the start-up APD attenuation on the Line OTX TLH |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.29.9.6.1.1.12 |
.1.3.6.1.4.1.20044.29.9.7.1
·
1 row entry
·
6 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004mCfgOtxtlhcapabilitiesTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004m-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004m-MIB::pm1004mCfgOtxtlhcapabilitiesTable'
List of Article
Row definition for the startuptablefive
table
table
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the otxtlhcapabilities
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.29.9.7.1.1.1 |
|
Component parameters :This OID
defines the component parameters |
Unsigned32 Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.29.9.7.1.1.3 |
|
Miscellaneous default settings
:This OID defines the miscellaneous parameters |
Unsigned32 Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.29.9.7.1.1.4 |
|
Number of the first channel of
the component :This OID defines the first channel number of the PM |
Unsigned32 Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.29.9.7.1.1.5 |
|
Number of the last channel of
the component :This OID defines the last channel number of the PM |
Unsigned32 Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.29.9.7.1.1.6 |
|
Grid value of the component :This
OID defines the grid of the PM |
Unsigned32 Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.29.9.7.1.1.7 |
.1.3.6.1.4.1.20044.29.11.2.1.16
·
1 row entry
·
11 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004mPerfUpCurrent15CntTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004m-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004m-MIB::pm1004mPerfUpCurrent15CntTable'
List of pm1004mPerfUpCurrent15Cnt Article
Row definition for the pm1004mPerfUpCurrent15Cnt
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm1004mPerfUpCurrent15Cnt
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.29.11.2.1.16.1.1 |
||||
|
Current 15-min CV counter inv.
:This OID indicates that the current 15-min Coding Violation counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.29.11.2.1.16.1.2 |
||||
|
Current 15-min CV counter :This
OID gives the current 15-min Coding Violation counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.29.11.2.1.16.1.3 |
||||
|
Current 15-min ES counter inv.
:This OID indicates that the current 15-min Errored Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.29.11.2.1.16.1.4 |
||||
|
Current 15-min ES counter :This
OID gives the current 15-min Errored Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.29.11.2.1.16.1.5 |
||||
|
Current 15-min SES counter inv.
:This OID indicates that the current 15-min severely Errored Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.29.11.2.1.16.1.6 |
||||
|
Current 15-min SES counter :This
OID gives the current 15-min severely Errored Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.29.11.2.1.16.1.7 |
||||
|
Current 15-min SEFS counter inv.
:This OID indicates that the current 15-min severely Errored Framing Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.29.11.2.1.16.1.8 |
||||
|
Current 15-min SEFS counter :This
OID gives the current 15-min severely Errored Framing Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.29.11.2.1.16.1.9 |
||||
|
Current 15-min UAS counter inv.
:This OID indicates that the current 15-min UnAvailable Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.29.11.2.1.16.1.10 |
||||
|
Current 15-min UAS counter :This
OID gives the current 15-min UnAvailable Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.29.11.2.1.16.1.11 |
.1.3.6.1.4.1.20044.29.11.2.1.24
·
1 row entry
·
11 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004mPerfUpPast15CntTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004m-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004m-MIB::pm1004mPerfUpPast15CntTable'
List of pm1004mPerfUpPast15Cnt Article
Row definition for the pm1004mPerfUpPast15Cnt
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm1004mPerfUpPast15Cnt
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.29.11.2.1.24.1.1 |
||||
|
Previous 15-min CV counter inv.
:This OID indicates that the previous 15-min Coding Violation counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.29.11.2.1.24.1.2 |
||||
|
Previous 15-min CV counter :This
OID gives the previous 15-min Coding Violation counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.29.11.2.1.24.1.3 |
||||
|
Previous 15-min ES counter inv.
:This OID indicates that the previous 15-min Errored Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.29.11.2.1.24.1.4 |
||||
|
Previous 15-min ES counter :This
OID gives the previous 15-min Errored Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.29.11.2.1.24.1.5 |
||||
|
Previous 15-min SES counter inv.
:This OID indicates that the previous 15-min severely Errored Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.29.11.2.1.24.1.6 |
||||
|
Previous 15-min SES counter :This
OID gives the previous 15-min severely Errored Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.29.11.2.1.24.1.7 |
||||
|
Previous 15-min SEFS counter inv.
:This OID indicates that the previous 15-min severely Errored Framing Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.29.11.2.1.24.1.8 |
||||
|
Previous 15-min SEFS counter :This
OID gives the previous 15-min severely Errored Framing Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.29.11.2.1.24.1.9 |
||||
|
Previous 15-min UAS counter inv.
:This OID indicates that the previous 15-min UnAvailable Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.29.11.2.1.24.1.10 |
||||
|
Previous 15-min UAS counter :This
OID gives the previous 15-min UnAvailable Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.29.11.2.1.24.1.11 |
.1.3.6.1.4.1.20044.29.11.2.1.32
·
1 row entry
·
11 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004mPerfUpCurrent24CntTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004m-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004m-MIB::pm1004mPerfUpCurrent24CntTable'
List of pm1004mPerfUpCurrent24Cnt Article
Row definition for the pm1004mPerfUpCurrent24Cnt
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm1004mPerfUpCurrent24Cnt
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.29.11.2.1.32.1.1 |
||||
|
Current 24-hours CV counter inv.
:This OID indicates that the current 24-hours Coding Violation counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.29.11.2.1.32.1.2 |
||||
|
Current 24-hours CV counter :This
OID gives the current 24-hours Coding Violation counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.29.11.2.1.32.1.3 |
||||
|
Current 24-hours ES counter inv.
:This OID indicates that the current 24-hours Errored Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.29.11.2.1.32.1.4 |
||||
|
Current 24-hours ES counter :This
OID gives the current 24-hours Errored Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.29.11.2.1.32.1.5 |
||||
|
Current 24-hours SES counter inv.
:This OID indicates that the current 24-hours severely Errored Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.29.11.2.1.32.1.6 |
||||
|
Current 24-hours SES counter :This
OID gives the current 24-hours severely Errored Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.29.11.2.1.32.1.7 |
||||
|
Current 24-hours SEFS counter
inv. :This OID indicates that the current 24-hours severely Errored Framing Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.29.11.2.1.32.1.8 |
||||
|
Current 24-hours SEFS counter
:This OID gives the current 24-hours severely Errored Framing Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.29.11.2.1.32.1.9 |
||||
|
Current 24-hours UAS counter inv.
:This OID indicates that the current 24-hours UnAvailable Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.29.11.2.1.32.1.10 |
||||
|
Current 24-hours UAS counter :This
OID gives the current 24-hours UnAvailable Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.29.11.2.1.32.1.11 |
.1.3.6.1.4.1.20044.29.11.2.1.40
·
1 row entry
·
11 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004mPerfUpPast24CntTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004m-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004m-MIB::pm1004mPerfUpPast24CntTable'
List of pm1004mPerfUpPast24Cnt Article
Row definition for the pm1004mPerfUpPast24Cnt
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm1004mPerfUpPast24Cnt
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.29.11.2.1.40.1.1 |
||||
|
Previous 24-hours CV counter inv.
:This OID indicates that the previous 24-hours Coding Violation counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.29.11.2.1.40.1.2 |
||||
|
Previous 24-hours CV counter :This
OID gives the previous 24-hours Coding Violation counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.29.11.2.1.40.1.3 |
||||
|
Previous 24-hours ES counter inv.
:This OID indicates that the previous 24-hours Errored Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.29.11.2.1.40.1.4 |
||||
|
Previous 24-hours ES counter :This
OID gives the previous 24-hours Errored Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.29.11.2.1.40.1.5 |
||||
|
Previous 24-hours SES counter
inv. :This OID indicates that the previous 24-hours severely Errored Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.29.11.2.1.40.1.6 |
||||
|
Previous 24-hours SES counter
:This OID gives the previous 24-hours severely Errored Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.29.11.2.1.40.1.7 |
||||
|
Previous 24-hours SEFS counter
inv. :This OID indicates that the previous 24-hours severely Errored Framing Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.29.11.2.1.40.1.8 |
||||
|
Previous 24-hours SEFS counter
:This OID gives the previous 24-hours severely Errored Framing Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.29.11.2.1.40.1.9 |
||||
|
Previous 24-hours UAS counter
inv. :This OID indicates that the previous 24-hours UnAvailable Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.29.11.2.1.40.1.10 |
||||
|
Previous 24-hours UAS counter
:This OID gives the previous 24-hours UnAvailable Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.29.11.2.1.40.1.11 |
pm1004mAlmj0AlarmTable
table.1.3.6.1.4.1.20044.29.11.2.2.2112
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004mAlmj0AlarmTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004m-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004m-MIB::pm1004mAlmj0AlarmTable'
List of pm1004mAlmj0Alarm Article
Row definition for the pm1004mAlmj0Alarm
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm1004mAlmj0Alarm
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.29.11.2.2.2112.1.1 |
||||
|
Trace Identifier Mismatch :This
OID indicates a Trace Identifier Mismatch has been detected on the client input stream <Condtype> J0_TIM_ALARM_1 <Probcause> other (1) <Alarmtype> other (1) <Polarity> (2) |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.29.11.2.2.2112.1.2 |
||||
|
Trace Identifier Unstable :This
OID indicates the Trace Identifier is unstable on the client input stream <Condtype> J0_TII_ALARM_1 <Probcause> other (1) <Alarmtype> other (1) <Polarity> (2) |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.29.11.2.2.2112.1.3 |
||||
|
CRC Error On Trace Identifier
:This OID indicates that a CRC error has been detected in the stable Trace Identifier on the client input stream <Condtype> CRC7_ERROR_1 <Probcause> other (1) <Alarmtype> other (1) <P… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.29.11.2.2.2112.1.4 |
.1.3.6.1.4.1.20044.29.11.3.1.128
·
1 row entry
·
11 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004mPerfLineCurrent15CntTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004m-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004m-MIB::pm1004mPerfLineCurrent15CntTable'
List of pm1004mPerfLineCurrent15Cnt Article
Row definition for the pm1004mPerfLineCurrent15Cnt
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm1004mPerfLineCurrent15Cnt
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.29.11.3.1.128.1.1 |
||||
|
Current 15-min CV counter inv.
:This OID indicates that the current 15-min Coding Violation counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.29.11.3.1.128.1.2 |
||||
|
Current 15-min CV counter :This
OID gives the current 15-min Coding Violation counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.29.11.3.1.128.1.3 |
||||
|
Current 15-min ES counter inv.
:This OID indicates that the current 15-min Errored Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.29.11.3.1.128.1.4 |
||||
|
Current 15-min ES counter :This
OID gives the current 15-min Errored Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.29.11.3.1.128.1.5 |
||||
|
Current 15-min SES counter inv.
:This OID indicates that the current 15-min severely Errored Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.29.11.3.1.128.1.6 |
||||
|
Current 15-min SES counter :This
OID gives the current 15-min severely Errored Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.29.11.3.1.128.1.7 |
||||
|
Current 15-min SEFS counter inv.
:This OID indicates that the current 15-min severely Errored Framing Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.29.11.3.1.128.1.8 |
||||
|
Current 15-min SEFS counter :This
OID gives the current 15-min severely Errored Framing Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.29.11.3.1.128.1.9 |
||||
|
Current 15-min UAS counter inv.
:This OID indicates that the current 15-min UnAvailable Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.29.11.3.1.128.1.10 |
||||
|
Current 15-min UAS counter :This
OID gives the current 15-min UnAvailable Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.29.11.3.1.128.1.11 |
.1.3.6.1.4.1.20044.29.11.3.1.129
·
1 row entry
·
11 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004mPerfLinePast15CntTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004m-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004m-MIB::pm1004mPerfLinePast15CntTable'
List of pm1004mPerfLinePast15Cnt Article
Row definition for the pm1004mPerfLinePast15Cnt
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm1004mPerfLinePast15Cnt
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.29.11.3.1.129.1.1 |
||||
|
Previous 15-min CV counter inv.
:This OID indicates that the previous 15-min Coding Violation counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.29.11.3.1.129.1.2 |
||||
|
Previous 15-min CV counter :This
OID gives the previous 15-min Coding Violation counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.29.11.3.1.129.1.3 |
||||
|
Previous 15-min ES counter inv.
:This OID indicates that the previous 15-min Errored Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.29.11.3.1.129.1.4 |
||||
|
Previous 15-min ES counter :This
OID gives the previous 15-min Errored Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.29.11.3.1.129.1.5 |
||||
|
Previous 15-min SES counter inv.
:This OID indicates that the previous 15-min severely Errored Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.29.11.3.1.129.1.6 |
||||
|
Previous 15-min SES counter :This
OID gives the previous 15-min severely Errored Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.29.11.3.1.129.1.7 |
||||
|
Previous 15-min SEFS counter inv.
:This OID indicates that the previous 15-min severely Errored Framing Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.29.11.3.1.129.1.8 |
||||
|
Previous 15-min SEFS counter :This
OID gives the previous 15-min severely Errored Framing Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.29.11.3.1.129.1.9 |
||||
|
Previous 15-min UAS counter inv.
:This OID indicates that the previous 15-min UnAvailable Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.29.11.3.1.129.1.10 |
||||
|
Previous 15-min UAS counter :This
OID gives the previous 15-min UnAvailable Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.29.11.3.1.129.1.11 |
.1.3.6.1.4.1.20044.29.11.3.1.130
·
1 row entry
·
11 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004mPerfLineCurrent24CntTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004m-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004m-MIB::pm1004mPerfLineCurrent24CntTable'
List of pm1004mPerfLineCurrent24Cnt Article
Row definition for the pm1004mPerfLineCurrent24Cnt
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm1004mPerfLineCurrent24Cnt
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.29.11.3.1.130.1.1 |
||||
|
Current 24-hours CV counter inv.
:This OID indicates that the current 24-hours Coding Violation counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.29.11.3.1.130.1.2 |
||||
|
Current 24-hours CV counter :This
OID gives the current 24-hours Coding Violation counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.29.11.3.1.130.1.3 |
||||
|
Current 24-hours ES counter inv.
:This OID indicates that the current 24-hours Errored Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.29.11.3.1.130.1.4 |
||||
|
Current 24-hours ES counter :This
OID gives the current 24-hours Errored Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.29.11.3.1.130.1.5 |
||||
|
Current 24-hours SES counter inv.
:This OID indicates that the current 24-hours severely Errored Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.29.11.3.1.130.1.6 |
||||
|
Current 24-hours SES counter :This
OID gives the current 24-hours severely Errored Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.29.11.3.1.130.1.7 |
||||
|
Current 24-hours SEFS counter
inv. :This OID indicates that the current 24-hours severely Errored Framing Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.29.11.3.1.130.1.8 |
||||
|
Current 24-hours SEFS counter
:This OID gives the current 24-hours severely Errored Framing Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.29.11.3.1.130.1.9 |
||||
|
Current 24-hours UAS counter inv.
:This OID indicates that the current 24-hours UnAvailable Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.29.11.3.1.130.1.10 |
||||
|
Current 24-hours UAS counter :This
OID gives the current 24-hours UnAvailable Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.29.11.3.1.130.1.11 |
.1.3.6.1.4.1.20044.29.11.3.1.131
·
1 row entry
·
11 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004mPerfLinePast24CntTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004m-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004m-MIB::pm1004mPerfLinePast24CntTable'
List of pm1004mPerfLinePast24Cnt Article
Row definition for the pm1004mPerfLinePast24Cnt
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm1004mPerfLinePast24Cnt
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.29.11.3.1.131.1.1 |
||||
|
Previous 24-hours CV counter inv.
:This OID indicates that the previous 24-hours Coding Violation counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.29.11.3.1.131.1.2 |
||||
|
Previous 24-hours CV counter :This
OID gives the previous 24-hours Coding Violation counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.29.11.3.1.131.1.3 |
||||
|
Previous 24-hours ES counter inv.
:This OID indicates that the previous 24-hours Errored Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.29.11.3.1.131.1.4 |
||||
|
Previous 24-hours ES counter :This
OID gives the previous 24-hours Errored Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.29.11.3.1.131.1.5 |
||||
|
Previous 24-hours SES counter
inv. :This OID indicates that the previous 24-hours severely Errored Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.29.11.3.1.131.1.6 |
||||
|
Previous 24-hours SES counter
:This OID gives the previous 24-hours severely Errored Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.29.11.3.1.131.1.7 |
||||
|
Previous 24-hours SEFS counter
inv. :This OID indicates that the previous 24-hours severely Errored Framing Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.29.11.3.1.131.1.8 |
||||
|
Previous 24-hours SEFS counter
:This OID gives the previous 24-hours severely Errored Framing Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.29.11.3.1.131.1.9 |
||||
|
Previous 24-hours UAS counter
inv. :This OID indicates that the previous 24-hours UnAvailable Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.29.11.3.1.131.1.10 |
||||
|
Previous 24-hours UAS counter
:This OID gives the previous 24-hours UnAvailable Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.29.11.3.1.131.1.11 |