EKINOPS-Pm1001lhr-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
41
Rows
41
Columns
159

pm1001lhrAlmlineXfp1WarningsTable

table
.1.3.6.1.4.1.20044.22.2.3.1.209 · 1 row entry · 9 columns
Open in standard view
Uses the ekinops variant from /opt/observium/mibs/ekinops.
Command help
Walk pm1001lhrAlmlineXfp1WarningsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1001lhr-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1001lhr-MIB::pm1001lhrAlmlineXfp1WarningsTable' 
List of pm1001lhrAlmlineXfp1Warnings 
Article
pm1001lhrAlmlineXfp1WarningsEntry row .1.3.6.1.4.1.20044.22.2.3.1.209.1
Row definition for the pm1001lhrAlmlineXfp1Warnings
table
Indexes
Column Syntax OID
pm1001lhrAlmlineXfp1WarningsIndex
Index definition for the pm1001lhrAlmlineXfp1Warnings
table
Integer32
Constraints:
range: 0-128
 .1.3.6.1.4.1.20044.22.2.3.1.209.1.1
pm1001lhrAlmTxPowerLowWarningPortn
Line Optical Tx Power Low Warning
:Warning indicating that the XFP/OTX
transmitter transmitter output
power is lower than the threshold
value written in the XFP/OTX EEPROM
<Condtype> TX_POWER_LOW_WARNING_1
<Probca…
EKINOPS-MIBEkiOnOff
Type Values:
1off
2on
 .1.3.6.1.4.1.20044.22.2.3.1.209.1.2
pm1001lhrAlmTxPowerHighWarningPortn
Line Optical Tx Power High Warning
:Warning indicating that the XFP/OTX
transmitter transmitter output
power is higher than the threshold
value written in the XFP EEPROM
<Condtype> TX_POWER_HIGH_WARNING_1
<Probcau…
EKINOPS-MIBEkiOnOff
Type Values:
1off
2on
 .1.3.6.1.4.1.20044.22.2.3.1.209.1.3
pm1001lhrAlmTxBiasLowWarningPortn
Line Transceiver Bias Low Warning
:Warning indicating that the XFP/OTX
transmitter laser bias current
is lower than the threshold value
written in the XFP/OTX EEPROM <Condtype>
TX_BIAS_LOW_WARNING_1 <Probcause>
tr…
EKINOPS-MIBEkiOnOff
Type Values:
1off
2on
 .1.3.6.1.4.1.20044.22.2.3.1.209.1.4
pm1001lhrAlmTxBiasHighWarningPortn
Line Transceiver Bias High Warning
:Warning indicating that the XFP/OTX
transmitter laser bias current
is higher than the threshold value
written in the XFP EEPROM <Condtype>
TX_BIAS_HIGH_WARNING_1 <Probcause>
tra…
EKINOPS-MIBEkiOnOff
Type Values:
1off
2on
 .1.3.6.1.4.1.20044.22.2.3.1.209.1.5
pm1001lhrAlmTempLowWarningPortn
Line Transceiver Temp Low Warning
:Warning indicating that the XFP/OTX
temperature is lower than the threshold
value written in the XFP/OTX EEPROM
<Condtype> TEMP_LOW_WARNING_1 <Probcause>
temperatureUnacceptable (…
EKINOPS-MIBEkiOnOff
Type Values:
1off
2on
 .1.3.6.1.4.1.20044.22.2.3.1.209.1.8
pm1001lhrAlmTempHighWarningPortn
Line Transceiver Temp High Warning
:Warning indicating that the XFP/OTX
temperature is higher than the
threshold value written in the
XFP EEPROM <Condtype> TEMP_HIGH_WARNING_1
<Probcause> temperatureUnacceptable
(…
EKINOPS-MIBEkiOnOff
Type Values:
1off
2on
 .1.3.6.1.4.1.20044.22.2.3.1.209.1.9
pm1001lhrAlmRxPowerLowWarningPortn
Line Optical Rx Power Low Warning
:Warning indicating that the XFP
received optical power is lower
than the threshold value written
in the XFP EEPROM <Condtype> RX_POWER_LOW_WARNING_1
<Probcause> receiveFailure (4…
EKINOPS-MIBEkiOnOff
Type Values:
1off
2on
 .1.3.6.1.4.1.20044.22.2.3.1.209.1.16
pm1001lhrAlmRxPowerHighWarningPortn
Line Optical Rx Power High Warning
:Warning indicating that the XFP
received optical power is higher
than the threshold value written
in the XFP EEPROM <Condtype> RX_POWER_HIGH_WARNING_1
<Probcause> receiveFailure …
EKINOPS-MIBEkiOnOff
Type Values:
1off
2on
 .1.3.6.1.4.1.20044.22.2.3.1.209.1.17

pm1001lhrAlmlineOtx1TlhWarningsTable

table
.1.3.6.1.4.1.20044.22.2.3.1.225 · 1 row entry · 5 columns
Open in standard view
Uses the ekinops variant from /opt/observium/mibs/ekinops.
Command help
Walk pm1001lhrAlmlineOtx1TlhWarningsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1001lhr-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1001lhr-MIB::pm1001lhrAlmlineOtx1TlhWarningsTable' 
List of pm1001lhrAlmlineOtx1TlhWarnings 
Article
pm1001lhrAlmlineOtx1TlhWarningsEntry row .1.3.6.1.4.1.20044.22.2.3.1.225.1
Row definition for the pm1001lhrAlmlineOtx1TlhWarnings
table
Indexes
Column Syntax OID
pm1001lhrAlmlineOtx1TlhWarningsIndex
Index definition for the pm1001lhrAlmlineOtx1TlhWarnings
table
Integer32
Constraints:
range: 0-128
 .1.3.6.1.4.1.20044.22.2.3.1.225.1.1
pm1001lhrAlmLineModulatorAgingHighWarningPortn
Line Modulator Aging High Warning
:Warning indicating the Line OTX
TLH modulator aging is higher than
the threshold written in the EEPROM
<Condtype> LINE_MODULATOR_AGING_HIGH_WARNING_1
<Probcause> transmitterFailur…
EKINOPS-MIBEkiOnOff
Type Values:
1off
2on
 .1.3.6.1.4.1.20044.22.2.3.1.225.1.6
pm1001lhrAlmLineAgingHighWarningPortn
Line OTX TLH Aging High Warning
:Warning indicating the Line OTX
TLH aging is higher than the threshold
written in the EEPROM <Condtype>
LINE_AGING_HIGH_WARNING_1 <Probcause>
transmitterFailure (56) <Alarmtype>
eq…
EKINOPS-MIBEkiOnOff
Type Values:
1off
2on
 .1.3.6.1.4.1.20044.22.2.3.1.225.1.7
pm1001lhrAlmLineFreqDevHighWarningPortn
Line Freq. Deviation High Warning
:Warning indicating the Line OTX
TLH frequency deviation is higher
than the threshold written in the
EEPROM <Condtype> LINE_FREQ_DEV_HIGH_WARNING_1
<Probcause> transmitterFailure
…
EKINOPS-MIBEkiOnOff
Type Values:
1off
2on
 .1.3.6.1.4.1.20044.22.2.3.1.225.1.13
pm1001lhrAlmLineLaserTempHighWarningPortn
Line Laser Temp. High Warning
:Warning indicating the Line OTX
TLH laser temperature is higher
than the threshold written in the
EEPROM <Condtype> LINE_LASER_TEMP_HIGH_WARNING_1
<Probcause> temperatureUnacceptable …
EKINOPS-MIBEkiOnOff
Type Values:
1off
2on
 .1.3.6.1.4.1.20044.22.2.3.1.225.1.15

pm1001lhrAlmdfrmBerTable

table
.1.3.6.1.4.1.20044.22.2.3.2.129 · 1 row entry · 4 columns
Open in standard view
Uses the ekinops variant from /opt/observium/mibs/ekinops.
Command help
Walk pm1001lhrAlmdfrmBerTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1001lhr-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1001lhr-MIB::pm1001lhrAlmdfrmBerTable' 
List of pm1001lhrAlmdfrmBer Article
pm1001lhrAlmdfrmBerEntry row .1.3.6.1.4.1.20044.22.2.3.2.129.1
Row definition for the pm1001lhrAlmdfrmBer
table
Indexes
Column Syntax OID
pm1001lhrAlmdfrmBerIndex
Index definition for the pm1001lhrAlmdfrmBer
table
Integer32
Constraints:
range: 0-128
 .1.3.6.1.4.1.20044.22.2.3.2.129.1.1
pm1001lhrAlmLineSignalDegradePortn
Custom Line Signal Degrade :This
OID indicates that the line input
signal is DEGRADE. The assertion
hysteresis can customized by the
host <Condtype> LINE_SIGNAL_DEGRADE_1
<Probcause> degradedSignal (13)
<Alarmtype…
EKINOPS-MIBEkiOnOff
Type Values:
1off
2on
 .1.3.6.1.4.1.20044.22.2.3.2.129.1.2
pm1001lhrAlmLineSignalFailPortn
Custom Line Signal Fail :This
OID indicates that the line input
signal is FAIL. The assertion hysteresis
can be customized by the host <Condtype>
LINE_SIGNAL_FAIL_1 <Probcause>
receiveFailure (41) <Alarmtype>
inte…
EKINOPS-MIBEkiOnOff
Type Values:
1off
2on
 .1.3.6.1.4.1.20044.22.2.3.2.129.1.3
pm1001lhrAlmLineDegradePortn
Fixed Line Signal Degrade :This
OID indicates that the line input
signal is DEGRADE. The assetion
hysteresis is fixed to 10-8 (assertion)
and 10-9 (de-assertion) <Condtype>
LINE_DEGRADE_1 <Probcause> degradedSignal…
EKINOPS-MIBEkiOnOff
Type Values:
1off
2on
 .1.3.6.1.4.1.20044.22.2.3.2.129.1.6

pm1001lhrAlmlineXfp1AlarmTable

table
.1.3.6.1.4.1.20044.22.2.3.2.208 · 1 row entry · 9 columns
Open in standard view
Uses the ekinops variant from /opt/observium/mibs/ekinops.
Command help
Walk pm1001lhrAlmlineXfp1AlarmTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1001lhr-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1001lhr-MIB::pm1001lhrAlmlineXfp1AlarmTable' 
List of pm1001lhrAlmlineXfp1Alarm 
Article
pm1001lhrAlmlineXfp1AlarmEntry row .1.3.6.1.4.1.20044.22.2.3.2.208.1
Row definition for the pm1001lhrAlmlineXfp1Alarm
table
Indexes
Column Syntax OID
pm1001lhrAlmlineXfp1AlarmIndex
Index definition for the pm1001lhrAlmlineXfp1Alarm
table
Integer32
Constraints:
range: 0-128
 .1.3.6.1.4.1.20044.22.2.3.2.208.1.1
pm1001lhrAlmTxPowerLowAlarmPortn
Line Optical Tx Power Low :Alarm
indicating that the XFP/OTX transmitter
transmitter output power is lower
than the threshold value written
in the XFP/OTX EEPROM <Condtype>
TX_POWER_LOW_ALARM_1 <Probcause>
transmi…
EKINOPS-MIBEkiOnOff
Type Values:
1off
2on
 .1.3.6.1.4.1.20044.22.2.3.2.208.1.2
pm1001lhrAlmTxPowerHighAlarmPortn
Line Optical Tx Power High :Alarm
indicating that the XFP/OTX transmitter
transmitter output power is higher
than the threshold value written
in the XFP EEPROM <Condtype> TX_POWER_HIGH_ALARM_1
<Probcause> transmitt…
EKINOPS-MIBEkiOnOff
Type Values:
1off
2on
 .1.3.6.1.4.1.20044.22.2.3.2.208.1.3
pm1001lhrAlmTxBiasLowAlarmPortn
Line Transceiver Bias Low :Alarm
indicating that the XFP/OTX transmitter
laser bias current is lower than
the threshold value written in
the XFP/OTX EEPROM <Condtype>
TX_BIAS_LOW_ALARM_1 <Probcause>
transmitterFai…
EKINOPS-MIBEkiOnOff
Type Values:
1off
2on
 .1.3.6.1.4.1.20044.22.2.3.2.208.1.4
pm1001lhrAlmTxBiasHighAlarmPortn
Line Transceiver Bias High :Alarm
indicating that the XFP/OTX transmitter
laser bias current is higher than
the threshold value written in
the XFP EEPROM <Condtype> TX_BIAS_HIGH_ALARM_1
<Probcause> transmitterFailu…
EKINOPS-MIBEkiOnOff
Type Values:
1off
2on
 .1.3.6.1.4.1.20044.22.2.3.2.208.1.5
pm1001lhrAlmTempLowAlarmPortn
Line Transceiver Temp Low :Alarm
indicating that the XFP/OTX temperature
is lower than the threshold value
written in the XFP/OTX EEPROM <Condtype>
TEMP_LOW_ALARM_1 <Probcause> temperatureUnacceptable
(51) <Alarmty…
EKINOPS-MIBEkiOnOff
Type Values:
1off
2on
 .1.3.6.1.4.1.20044.22.2.3.2.208.1.8
pm1001lhrAlmTempHighAlarmPortn
Line Transceiver Temp High :Alarm
indicating that the XFP/OTX temperature
is higher than the threshold value
written in the XFP EEPROM <Condtype>
TEMP_HIGH_ALARM_1 <Probcause> temperatureUnacceptable
(51) <Alarmtyp…
EKINOPS-MIBEkiOnOff
Type Values:
1off
2on
 .1.3.6.1.4.1.20044.22.2.3.2.208.1.9
pm1001lhrAlmRxPowerLowAlarmPortn
Line Optical Rx Power Low :Alarm
indicating that the XFP received
optical power is lower than the
threshold value written in the
XFP EEPROM <Condtype> RX_POWER_LOW_ALARM_1
<Probcause> receiveFailure (41)
<Alarmty…
EKINOPS-MIBEkiOnOff
Type Values:
1off
2on
 .1.3.6.1.4.1.20044.22.2.3.2.208.1.16
pm1001lhrAlmRxPowerHighAlarmPortn
Line Optical Rx Power High :Alarm
indicating that the XFP received
optical power is higher than the
threshold value written in the
XFP EEPROM <Condtype> RX_POWER_HIGH_ALARM_1
<Probcause> receiveFailure (41)
<Alarm…
EKINOPS-MIBEkiOnOff
Type Values:
1off
2on
 .1.3.6.1.4.1.20044.22.2.3.2.208.1.17

pm1001lhrAlmlineXfp1SupplyAlarmTable

table
.1.3.6.1.4.1.20044.22.2.3.2.212 · 1 row entry · 17 columns
Open in standard view
Uses the ekinops variant from /opt/observium/mibs/ekinops.
Command help
Walk pm1001lhrAlmlineXfp1SupplyAlarmTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1001lhr-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1001lhr-MIB::pm1001lhrAlmlineXfp1SupplyAlarmTable' 
List of pm1001lhrAlmlineXfp1SupplyAlarm 
Article
pm1001lhrAlmlineXfp1SupplyAlarmEntry row .1.3.6.1.4.1.20044.22.2.3.2.212.1
Row definition for the pm1001lhrAlmlineXfp1SupplyAlarm
table
Indexes
Column Syntax OID
pm1001lhrAlmlineXfp1SupplyAlarmIndex
Index definition for the pm1001lhrAlmlineXfp1SupplyAlarm
table
Integer32
Constraints:
range: 0-128
 .1.3.6.1.4.1.20044.22.2.3.2.212.1.1
pm1001lhrAlmVee5LowAlarmPortn
VEE5 Power Supply Low :Alarm indicating
the XFP/OTX VEE5 power supply is
lower than the threshold written
in the EEPROM <Condtype> VEE5_LOW_ALARM_1
<Probcause> powerProblem (36) <Alarmtype>
equipmentAlarm (5) <Pola…
EKINOPS-MIBEkiOnOff
Type Values:
1off
2on
 .1.3.6.1.4.1.20044.22.2.3.2.212.1.2
pm1001lhrAlmVee5HighAlarmPortn
VEE5 Power Supply High :Alarm
indicating the XFP/OTX VEE5 power
supply is higher than the threshold
written in the EEPROM <Condtype>
VEE5_HIGH_ALARM_1 <Probcause> powerProblem
(36) <Alarmtype> equipmentAlarm
(5) <…
EKINOPS-MIBEkiOnOff
Type Values:
1off
2on
 .1.3.6.1.4.1.20044.22.2.3.2.212.1.3
pm1001lhrAlmVcc2LowAlarmPortn
VCC2 Power Supply Low :Alarm indicating
the XFP/OTX VCC2 power supply is
lower than the threshold written
in the EEPROM <Condtype> VCC2_LOW_ALARM_1
<Probcause> powerProblem (36) <Alarmtype>
equipmentAlarm (5) <Pola…
EKINOPS-MIBEkiOnOff
Type Values:
1off
2on
 .1.3.6.1.4.1.20044.22.2.3.2.212.1.4
pm1001lhrAlmVcc2HighAlarmPortn
VCC2 Power Supply High :Alarm
indicating the XFP/OTX VCC2 power
supply is higher than the threshold
written in the EEPROM <Condtype>
VCC2_HIGH_ALARM_1 <Probcause> powerProblem
(36) <Alarmtype> equipmentAlarm
(5) <…
EKINOPS-MIBEkiOnOff
Type Values:
1off
2on
 .1.3.6.1.4.1.20044.22.2.3.2.212.1.5
pm1001lhrAlmVcc3LowAlarmPortn
VCC3 Power Supply Low :Alarm indicating
the XFP/OTX VCC3 power supply is
lower than the threshold written
in the EEPROM <Condtype> VCC3_LOW_ALARM_1
<Probcause> powerProblem (36) <Alarmtype>
equipmentAlarm (5) <Pola…
EKINOPS-MIBEkiOnOff
Type Values:
1off
2on
 .1.3.6.1.4.1.20044.22.2.3.2.212.1.6
pm1001lhrAlmVcc3HighAlarmPortn
VCC3 Power Supply High :Alarm
indicating the XFP/OTX VCC3 power
supply is higher than the threshold
written in the EEPROM <Condtype>
VCC3_HIGH_ALARM_1 <Probcause> powerProblem
(36) <Alarmtype> equipmentAlarm
(5) <…
EKINOPS-MIBEkiOnOff
Type Values:
1off
2on
 .1.3.6.1.4.1.20044.22.2.3.2.212.1.7
pm1001lhrAlmVcc5LowAlarmPortn
VCC5 Power Supply Low :Alarm indicating
the XFP/OTX VCC5 power supply is
lower than the threshold written
in the EEPROM <Condtype> VCC5_LOW_ALARM_1
<Probcause> powerProblem (36) <Alarmtype>
equipmentAlarm (5) <Pola…
EKINOPS-MIBEkiOnOff
Type Values:
1off
2on
 .1.3.6.1.4.1.20044.22.2.3.2.212.1.8
pm1001lhrAlmVcc5HighAlarmPortn
VCC5 Power Supply High :Alarm
indicating the XFP/OTX VCC5 power
supply is higher than the threshold
written in the EEPROM <Condtype>
VCC5_HIGH_ALARM_1 <Probcause> powerProblem
(36) <Alarmtype> equipmentAlarm
(5) <…
EKINOPS-MIBEkiOnOff
Type Values:
1off
2on
 .1.3.6.1.4.1.20044.22.2.3.2.212.1.9
pm1001lhrAlmVee5LowWarningPortn
VEE5 Power Supply Low Warning
:Warning indicating the XFP/OTX
VEE5 power supply is lower than
the threshold written in the EEPROM
<Condtype> VEE5_LOW_WARNING_1 <Probcause>
powerProblem (36) <Alarmtype> equipmentAla…
EKINOPS-MIBEkiOnOff
Type Values:
1off
2on
 .1.3.6.1.4.1.20044.22.2.3.2.212.1.10
pm1001lhrAlmVee5HighWarningPortn
VEE5 Power Supply High Warning
:Warning indicating the XFP/OTX
VEE5 power supply is higher than
the threshold written in the EEPROM
<Condtype> VEE5_HIGH_WARNING_1
<Probcause> powerProblem (36)
<Alarmtype> equipmen…
EKINOPS-MIBEkiOnOff
Type Values:
1off
2on
 .1.3.6.1.4.1.20044.22.2.3.2.212.1.11
pm1001lhrAlmVcc2LowWarningPortn
VCC2 Power Supply Low Warning
:Warning indicating the XFP/OTX
VCC2 power supply is lower than
the threshold written in the EEPROM
<Condtype> VCC2_LOW_WARNING_1 <Probcause>
powerProblem (36) <Alarmtype> equipmentAla…
EKINOPS-MIBEkiOnOff
Type Values:
1off
2on
 .1.3.6.1.4.1.20044.22.2.3.2.212.1.12
pm1001lhrAlmVcc2HighWarningPortn
VCC2 Power Supply High Warning
:Warning indicating the XFP/OTX
VCC2 power supply is higher than
the threshold written in the EEPROM
<Condtype> VCC2_HIGH_WARNING_1
<Probcause> powerProblem (36)
<Alarmtype> equipmen…
EKINOPS-MIBEkiOnOff
Type Values:
1off
2on
 .1.3.6.1.4.1.20044.22.2.3.2.212.1.13
pm1001lhrAlmVcc3LowWarningPortn
VCC3 Power Supply Low Warning
:Warning indicating the XFP/OTX
VCC3 power supply is lower than
the threshold written in the EEPROM
<Condtype> VCC3_LOW_WARNING_1 <Probcause>
powerProblem (36) <Alarmtype> equipmentAla…
EKINOPS-MIBEkiOnOff
Type Values:
1off
2on
 .1.3.6.1.4.1.20044.22.2.3.2.212.1.14
pm1001lhrAlmVcc3HighWarningPortn
VCC3 Power Supply High Warning
:Warning indicating the XFP/OTX
VCC3 power supply is higher than
the threshold written in the EEPROM
<Condtype> VCC3_HIGH_WARNING_1
<Probcause> powerProblem (36)
<Alarmtype> equipmen…
EKINOPS-MIBEkiOnOff
Type Values:
1off
2on
 .1.3.6.1.4.1.20044.22.2.3.2.212.1.15
pm1001lhrAlmVcc5LowWarningPortn
VCC5 Power Supply Low Warning
:Warning indicating the XFP/OTX
VCC5 power supply is lower than
the threshold written in the EEPROM
<Condtype> VCC5_LOW_WARNING_1 <Probcause>
powerProblem (36) <Alarmtype> equipmentAla…
EKINOPS-MIBEkiOnOff
Type Values:
1off
2on
 .1.3.6.1.4.1.20044.22.2.3.2.212.1.16
pm1001lhrAlmVcc5HighWarningPortn
VCC5 Power Supply High Warning
:Warning indicating the XFP/OTX
VCC5 power supply is higher than
the threshold written in the EEPROM
<Condtype> VCC5_HIGH_WARNING_1
<Probcause> powerProblem (36)
<Alarmtype> equipmen…
EKINOPS-MIBEkiOnOff
Type Values:
1off
2on
 .1.3.6.1.4.1.20044.22.2.3.2.212.1.17

pm1001lhrAlmlineOtx1TlhAlarmsTable

table
.1.3.6.1.4.1.20044.22.2.3.2.224 · 1 row entry · 5 columns
Open in standard view
Uses the ekinops variant from /opt/observium/mibs/ekinops.
Command help
Walk pm1001lhrAlmlineOtx1TlhAlarmsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1001lhr-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1001lhr-MIB::pm1001lhrAlmlineOtx1TlhAlarmsTable' 
List of pm1001lhrAlmlineOtx1TlhAlarms 
Article
pm1001lhrAlmlineOtx1TlhAlarmsEntry row .1.3.6.1.4.1.20044.22.2.3.2.224.1
Row definition for the pm1001lhrAlmlineOtx1TlhAlarms
table
Indexes
Column Syntax OID
pm1001lhrAlmlineOtx1TlhAlarmsIndex
Index definition for the pm1001lhrAlmlineOtx1TlhAlarms
table
Integer32
Constraints:
range: 0-128
 .1.3.6.1.4.1.20044.22.2.3.2.224.1.1
pm1001lhrAlmLineModulatorAgingHighAlaPortn
Line Modulator Aging High Alarm
:Alarm indicating the Line OTX
TLH modulator aging is higher
than the threshold written in
the EEPROM <Condtype> LINE_MODULATOR_AGING_HIGH_ALA_1
<Probcause> transmitterFailure
(56) …
EKINOPS-MIBEkiOnOff
Type Values:
1off
2on
 .1.3.6.1.4.1.20044.22.2.3.2.224.1.6
pm1001lhrAlmLineAgingHighAlaPortn
Line OTX TLH Aging High Alarm
:Alarm indicating the Line OTX
TLH aging is higher than the threshold
written in the EEPROM <Condtype>
LINE_AGING_HIGH_ALA_1 <Probcause>
transmitterFailure (56) <Alarmtype>
equipmentA…
EKINOPS-MIBEkiOnOff
Type Values:
1off
2on
 .1.3.6.1.4.1.20044.22.2.3.2.224.1.7
pm1001lhrAlmLineFreqDevHighAlaPortn
Line Freq. Deviation High Alarm
:Alarm indicating the Line OTX
TLH frequency deviation is higher
than the threshold written in the
EEPROM <Condtype> LINE_FREQ_DEV_HIGH_ALA_1
<Probcause> transmitterFailure
(56) <Al…
EKINOPS-MIBEkiOnOff
Type Values:
1off
2on
 .1.3.6.1.4.1.20044.22.2.3.2.224.1.13
pm1001lhrAlmLineLaserTempHighAlaPortn
Line Laser Temp. High Alarm :Alarm
indicating the Line OTX TLH laser
temperature is higher than the
threshold written in the EEPROM
<Condtype> LINE_LASER_TEMP_HIGH_ALA_1
<Probcause> temperatureUnacceptable
(51) <A…
EKINOPS-MIBEkiOnOff
Type Values:
1off
2on
 .1.3.6.1.4.1.20044.22.2.3.2.224.1.15

pm1001lhrAlmsynthAlmLineTable

table
.1.3.6.1.4.1.20044.22.2.3.3.7 · 1 row entry · 9 columns
Open in standard view
Uses the ekinops variant from /opt/observium/mibs/ekinops.
Command help
Walk pm1001lhrAlmsynthAlmLineTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1001lhr-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1001lhr-MIB::pm1001lhrAlmsynthAlmLineTable' 
List of pm1001lhrAlmsynthAlmLine 
Article
pm1001lhrAlmsynthAlmLineEntry row .1.3.6.1.4.1.20044.22.2.3.3.7.1
Row definition for the pm1001lhrAlmsynthAlmLine
table
Indexes
Column Syntax OID
pm1001lhrAlmsynthAlmLineIndex
Index definition for the pm1001lhrAlmsynthAlmLine
table
Integer32
Constraints:
range: 0-128
 .1.3.6.1.4.1.20044.22.2.3.3.7.1.1
pm1001lhrAlmXfpAbsentPortn
Line Optical Module Absent :This
OID indicates that the line optical
interface (XFP or OTX) is not plugged
in. <Help> This alarm indicates
if the line transceiver is present.
<Condtype> XFP_ABSENT <Probcause>
in…
EKINOPS-MIBEkiOnOff
Type Values:
1off
2on
 .1.3.6.1.4.1.20044.22.2.3.3.7.1.2
pm1001lhrAlmXfpInitNotComplPortn
Line Optical Module Ready :This
OID indicates that the optical
interface (XFP or OTX) is not
operational. <Help> This status
indicates if the line transceiver
has been correctly initialized
<Condtype> XFP_INIT_N…
EKINOPS-MIBEkiOnOff
Type Values:
1off
2on
 .1.3.6.1.4.1.20044.22.2.3.3.7.1.3
pm1001lhrAlmLineHwFailPortn
Line Port HW Failure :This OID
indicates a failure on line port,
most probably caused by a HW issue
<Condtype> LINE_HW_FAIL <Probcause>
equipmentMalfunction (16) <Alarmtype>
synthesisAlarm (12) <Polarity>
(2)
EKINOPS-MIBEkiOnOff
Type Values:
1off
2on
 .1.3.6.1.4.1.20044.22.2.3.3.7.1.5
pm1001lhrAlmXfpTxOffPortn
Line Optical Laser Shutdown :This
OID indicates the line optical
output power is on <Help> This
status indicates if the line transceiver
laser is ON or OFF <Condtype> XFP_TX_OFF
<Probcause> other (1) <Alarmtype> …
EKINOPS-MIBEkiOnOff
Type Values:
1off
2on
 .1.3.6.1.4.1.20044.22.2.3.3.7.1.6
pm1001lhrAlmLineLocalOosPortn
Line Port In Service :This OID
indicates that the Line port is
In Service (1) of Out or Service
(2) <Help> This status indicates
if the line port is in service
<Condtype> LINE_LOCAL_OOS <Probcause>
informational…
EKINOPS-MIBEkiOnOff
Type Values:
1off
2on
 .1.3.6.1.4.1.20044.22.2.3.3.7.1.7
pm1001lhrAlmLineDdmWarningPortn
Warning On Line Optical Module
DDM :This OID indicates a warning
is present coming out of Line optical
interface DDM <Help> This alarm
indicates if a DDM Warning has
been detected on the line transceiver
<Condty…
EKINOPS-MIBEkiOnOff
Type Values:
1off
2on
 .1.3.6.1.4.1.20044.22.2.3.3.7.1.10
pm1001lhrAlmLineDdmAlmPortn
Alarm On Line Optical Module DDM
:This OID indicates an alarm is
present coming out of Line optical
interface DDM <Help> This alarm
indicates if a DDM Alarm has been
detected on the line transceiver
<Condtype> L…
EKINOPS-MIBEkiOnOff
Type Values:
1off
2on
 .1.3.6.1.4.1.20044.22.2.3.3.7.1.11
pm1001lhrAlmLineFailPortn
Line Port Failure :This OID indicates
a failure on the line port <Condtype>
LINE_FAIL <Probcause> equipmentMalfunction
(16) <Alarmtype> synthesisAlarm
(12) <Polarity> (2)
EKINOPS-MIBEkiOnOff
Type Values:
1off
2on
 .1.3.6.1.4.1.20044.22.2.3.3.7.1.13

pm1001lhrAlmdfrmAlmTable

table
.1.3.6.1.4.1.20044.22.2.3.3.128 · 1 row entry · 5 columns
Open in standard view
Uses the ekinops variant from /opt/observium/mibs/ekinops.
Command help
Walk pm1001lhrAlmdfrmAlmTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1001lhr-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1001lhr-MIB::pm1001lhrAlmdfrmAlmTable' 
List of pm1001lhrAlmdfrmAlm Article
pm1001lhrAlmdfrmAlmEntry row .1.3.6.1.4.1.20044.22.2.3.3.128.1
Row definition for the pm1001lhrAlmdfrmAlm
table
Indexes
Column Syntax OID
pm1001lhrAlmdfrmAlmIndex
Index definition for the pm1001lhrAlmdfrmAlm
table
Integer32
Constraints:
range: 0-128
 .1.3.6.1.4.1.20044.22.2.3.3.128.1.1
pm1001lhrAlmDwAisDetPortn
MS-AIS/L-AIS Detected On Line
Input :This bit indicates that
an MS-AIS has been detected on
incoming OC-192c/STM-64c input
signal <Help> This alarm indicates
if there is a MS-AIS/L-AIS is detected
on the line i…
EKINOPS-MIBEkiOnOff
Type Values:
1off
2on
 .1.3.6.1.4.1.20044.22.2.3.3.128.1.2
pm1001lhrAlmDwRdiDetPortn
MS-RDI/L-RDI Detected On Line
Input :This bit indicates that
an MS-RDI has been detected on
incoming OC-192c/STM-64c input
signal <Help> This alarm indicates
if there is a MS-RDI/L-RDI is detected
on the line i…
EKINOPS-MIBEkiOnOff
Type Values:
1off
2on
 .1.3.6.1.4.1.20044.22.2.3.3.128.1.3
pm1001lhrAlmDwOofPortn
SONET/SDH Line Out Of Frame :This
OID indicates that an Out Of Frame
has been detected on incoming input
signal <Help> This alarm indicates
if there is a Out of Frame is detected
on the line input signal <Condtyp…
EKINOPS-MIBEkiOnOff
Type Values:
1off
2on
 .1.3.6.1.4.1.20044.22.2.3.3.128.1.4
pm1001lhrAlmDwLofPortn
SONET/SDH Line Loss Of Frame :This
OID indicates that a Loss Of Frame
has been detected on incoming input
signal <Help> This alarm indicates
if there is a Loss of Frame is
detected on the line input signal
<Cond…
EKINOPS-MIBEkiOnOff
Type Values:
1off
2on
 .1.3.6.1.4.1.20044.22.2.3.3.128.1.5

pm1001lhrAlmlineSyncAlarmsTable

table
.1.3.6.1.4.1.20044.22.2.3.3.133 · 1 row entry · 4 columns
Open in standard view
Uses the ekinops variant from /opt/observium/mibs/ekinops.
Command help
Walk pm1001lhrAlmlineSyncAlarmsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1001lhr-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1001lhr-MIB::pm1001lhrAlmlineSyncAlarmsTable' 
List of pm1001lhrAlmlineSyncAlarms 
Article
pm1001lhrAlmlineSyncAlarmsEntry row .1.3.6.1.4.1.20044.22.2.3.3.133.1
Row definition for the pm1001lhrAlmlineSyncAlarms
table
Indexes
Column Syntax OID
pm1001lhrAlmlineSyncAlarmsIndex
Index definition for the pm1001lhrAlmlineSyncAlarms
table
Integer32
Constraints:
range: 0-128
 .1.3.6.1.4.1.20044.22.2.3.3.133.1.1
pm1001lhrAlmDwLockerrPortn
Downstream Clock Lock Error :This
OID indicates that the deserializer
input 10 Gb/s clock recovery is
not locked. <Condtype> DW_LOCKERR
<Probcause> receiveFailure (41)
<Alarmtype> equipmentAlarm (5)
<Polarity> (2)
EKINOPS-MIBEkiOnOff
Type Values:
1off
2on
 .1.3.6.1.4.1.20044.22.2.3.3.133.1.13
pm1001lhrAlmUpLockerrPortn
Upstream Clock Lock Error :This
OID indicates that the serializer
output 10 Gb/s clock multiplier
unit is not locked. <Condtype>
UP_LOCKERR <Probcause> receiveFailure
(41) <Alarmtype> equipmentAlarm
(5) <Polarity>…
EKINOPS-MIBEkiOnOff
Type Values:
1off
2on
 .1.3.6.1.4.1.20044.22.2.3.3.133.1.14
pm1001lhrAlmDwLosPortn
Line Input Loss Of Signal :This
OID indicates a loss of signal
on the 10 Gb/s input. <Help>
This alarm indicates if an optical
signal is detected on the line
transceiver input <Condtype> DW_LOS
<Probcause> recei…
EKINOPS-MIBEkiOnOff
Type Values:
1off
2on
 .1.3.6.1.4.1.20044.22.2.3.3.133.1.17

pm1001lhrAlmlineXfp1AlarmsTable

table
.1.3.6.1.4.1.20044.22.2.3.3.211 · 1 row entry · 10 columns
Open in standard view
Uses the ekinops variant from /opt/observium/mibs/ekinops.
Command help
Walk pm1001lhrAlmlineXfp1AlarmsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1001lhr-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1001lhr-MIB::pm1001lhrAlmlineXfp1AlarmsTable' 
List of pm1001lhrAlmlineXfp1Alarms 
Article
pm1001lhrAlmlineXfp1AlarmsEntry row .1.3.6.1.4.1.20044.22.2.3.3.211.1
Row definition for the pm1001lhrAlmlineXfp1Alarms
table
Indexes
Column Syntax OID
pm1001lhrAlmlineXfp1AlarmsIndex
Index definition for the pm1001lhrAlmlineXfp1Alarms
table
Integer32
Constraints:
range: 0-128
 .1.3.6.1.4.1.20044.22.2.3.3.211.1.1
pm1001lhrAlmModNrPortn
Line Optical Module Not Ready
:This OID indicates that the module
is unable to determine correct
data. <Help> This alarm indicates
if the line transceiver is ready
<Condtype> MOD_NR_1 <Probcause>
receiveFailure …
EKINOPS-MIBEkiOnOff
Type Values:
1off
2on
 .1.3.6.1.4.1.20044.22.2.3.3.211.1.3
pm1001lhrAlmRxCdrNotLockedPortn
Line Optical Rx CDR Unlocked :This
OID indicates that a loss of lock
on the receiving side CDR has been
detected <Help> This alarm indicates
if the Rx CDR is locked in the
line transceiver <Condtype> RX_CDR_NOT_L…
EKINOPS-MIBEkiOnOff
Type Values:
1off
2on
 .1.3.6.1.4.1.20044.22.2.3.3.211.1.4
pm1001lhrAlmRxNrPortn
Line Optical Rx Not Ready :This
OID indicates that a condition
has arisen leading to invalid
data on the receiving side. <Help>
This alarm indicates if the Rx
part of the line transceiver is
ready <Condtype> RX_…
EKINOPS-MIBEkiOnOff
Type Values:
1off
2on
 .1.3.6.1.4.1.20044.22.2.3.3.211.1.6
pm1001lhrAlmTxCdrNotLockedPortn
Line Optical Tx CDR Unlocked :This
OID indicates a loss of lock on
the transmitting side CDR has been
detected. <Help> This alarm indicates
if the Tx CDR is locked in the
line transceiver <Condtype> TX_CDR_NOT_LO…
EKINOPS-MIBEkiOnOff
Type Values:
1off
2on
 .1.3.6.1.4.1.20044.22.2.3.3.211.1.7
pm1001lhrAlmTxFaultPortn
Line Optical Tx Failure :This
OID indicates a fault condition
on the laser detected by the safety
syste <Help> This alarm indicates
if the laser of the line transceiver
is in fail condition <Condtype>
TX_FAULT_1…
EKINOPS-MIBEkiOnOff
Type Values:
1off
2on
 .1.3.6.1.4.1.20044.22.2.3.3.211.1.8
pm1001lhrAlmTxNrPortn
Line Optical Tx Not Ready :This
OID indicates a condition has arisen
leading to invalid data on the
transmitting side <Help> This
alarm indicates if the Tx part
of the line transceiver is ready
<Condtype> TX_NR_…
EKINOPS-MIBEkiOnOff
Type Values:
1off
2on
 .1.3.6.1.4.1.20044.22.2.3.3.211.1.9
pm1001lhrAlmWavelengthUnlockedPortn
Line Optical Tx Wavelength Unlocked
:This OID indicates that the wavelength
error is exceeding the manufacturer
tolerance <Help> This alarm indicates
if the wavelenght of the line transceiver
is locked <Condtype>…
EKINOPS-MIBEkiOnOff
Type Values:
1off
2on
 .1.3.6.1.4.1.20044.22.2.3.3.211.1.15
pm1001lhrAlmTecFaultPortn
Line Optical Tx Temp Regul Failed
:This OID indicates a failure on
the TEC module <Help> This alarm
indicates if the TEC of the line
transceiver is in fail condition
<Condtype> TEC_FAULT_1 <Probcause>
transmitte…
EKINOPS-MIBEkiOnOff
Type Values:
1off
2on
 .1.3.6.1.4.1.20044.22.2.3.3.211.1.16
pm1001lhrAlmApdSupplyFaultPortn
Line Rx Photodiode Power Failed
:This OID indicates a failure on
the APD power supply <Help> This
alarm indicates if the APD power
supply is in fail condition <Condtype>
APD_SUPPLY_FAULT_1 <Probcause>
receiverFa…
EKINOPS-MIBEkiOnOff
Type Values:
1off
2on
 .1.3.6.1.4.1.20044.22.2.3.3.211.1.17

pm1001lhrMesrxfp1LxModTempMeasTable

table
.1.3.6.1.4.1.20044.22.3.3.208 · 1 row entry · 2 columns
Open in standard view
Uses the ekinops variant from /opt/observium/mibs/ekinops.
Command help
Walk pm1001lhrMesrxfp1LxModTempMeasTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1001lhr-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1001lhr-MIB::pm1001lhrMesrxfp1LxModTempMeasTable' 
List of pm1001lhrMesrxfp1LxModTempMeas 
Article
pm1001lhrMesrxfp1LxModTempMeasEntry row .1.3.6.1.4.1.20044.22.3.3.208.1
Row definition for the pm1001lhrMesrxfp1LxModTempMeas
table
Indexes
Column Syntax OID
pm1001lhrMesrxfp1LxModTempMeasIndex
Index definition for the pm1001lhrMesrxfp1LxModTempMeas
table
Integer32
Constraints:
range: 0-128
 .1.3.6.1.4.1.20044.22.3.3.208.1.1
pm1001lhrMesrxfp1LxModTempMeasPortn
Line Optical Module Temperature
:This OID gives the temperature
of the XFP or OTX plugged in line#n,
read from the DDM (Digital Diagnostic
Monitoring) (Temperature = AV/256)
(Unit = C) <Help> This measure
gives …
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.20044.22.3.3.208.1.2

pm1001lhrMesrxfp1ReservedTable

table deprecated
.1.3.6.1.4.1.20044.22.3.3.209 · 1 row entry · 2 columns
Open in standard view
Uses the ekinops variant from /opt/observium/mibs/ekinops.
Command help
Walk pm1001lhrMesrxfp1ReservedTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1001lhr-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1001lhr-MIB::pm1001lhrMesrxfp1ReservedTable' 
List of pm1001lhrMesrxfp1Reserved 
Article
pm1001lhrMesrxfp1ReservedEntry row .1.3.6.1.4.1.20044.22.3.3.209.1
Row definition for the pm1001lhrMesrxfp1Reserved
table
Indexes
Column Syntax OID
pm1001lhrMesrxfp1ReservedIndexdeprecated
Index definition for the pm1001lhrMesrxfp1Reserved
table
Integer32
Constraints:
range: 0-128
 .1.3.6.1.4.1.20044.22.3.3.209.1.1
pm1001lhrMesrxfp1ReservedPortndeprecated
Not Used :Reserved
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.20044.22.3.3.209.1.2

pm1001lhrMesrxfp1LoBiasCurrentMeasTable

table
.1.3.6.1.4.1.20044.22.3.3.210 · 1 row entry · 2 columns
Open in standard view
Uses the ekinops variant from /opt/observium/mibs/ekinops.
Command help
Walk pm1001lhrMesrxfp1LoBiasCurrentMeasTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1001lhr-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1001lhr-MIB::pm1001lhrMesrxfp1LoBiasCurrentMeasTable' 
List of pm1001lhrMesrxfp1LoBiasCurrentMeas 
Article
pm1001lhrMesrxfp1LoBiasCurrentMeasEntry row .1.3.6.1.4.1.20044.22.3.3.210.1
Row definition for the pm1001lhrMesrxfp1LoBiasCurrentMeas
table
Indexes
Column Syntax OID
pm1001lhrMesrxfp1LoBiasCurrentMeasIndex
Index definition for the pm1001lhrMesrxfp1LoBiasCurrentMeas
table
Integer32
Constraints:
range: 0-128
 .1.3.6.1.4.1.20044.22.3.3.210.1.1
pm1001lhrMesrxfp1LoBiasCurrentMeasPortn
Line Optical Module Laser Bias
:This OID gives the bias value
of the XFP or OTX plugged in line
#n, read from the DDM (Digital
Diagnostic Monitoring) (Bias =
AV/500) (Unit = mA) <Help> This
measure gives the bia…
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.20044.22.3.3.210.1.2

pm1001lhrMesrxfp1LoTxPowerMeasTable

table
.1.3.6.1.4.1.20044.22.3.3.211 · 1 row entry · 2 columns
Open in standard view
Uses the ekinops variant from /opt/observium/mibs/ekinops.
Command help
Walk pm1001lhrMesrxfp1LoTxPowerMeasTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1001lhr-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1001lhr-MIB::pm1001lhrMesrxfp1LoTxPowerMeasTable' 
List of pm1001lhrMesrxfp1LoTxPowerMeas 
Article
pm1001lhrMesrxfp1LoTxPowerMeasEntry row .1.3.6.1.4.1.20044.22.3.3.211.1
Row definition for the pm1001lhrMesrxfp1LoTxPowerMeas
table
Indexes
Column Syntax OID
pm1001lhrMesrxfp1LoTxPowerMeasIndex
Index definition for the pm1001lhrMesrxfp1LoTxPowerMeas
table
Integer32
Constraints:
range: 0-128
 .1.3.6.1.4.1.20044.22.3.3.211.1.1
pm1001lhrMesrxfp1LoTxPowerMeasPortn
Line Optical Module Tx Power :This
OID gives the transmit power value
of the XFP or OTX plugged in line
#n, read from the DDM (Digital
Diagnostic Monitoring) (Power
= 10*log(AV)-40) (Unit = dBm)
<Help> This me…
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.20044.22.3.3.211.1.2

pm1001lhrMesrxfp1LiRxPowerMeasTable

table
.1.3.6.1.4.1.20044.22.3.3.212 · 1 row entry · 2 columns
Open in standard view
Uses the ekinops variant from /opt/observium/mibs/ekinops.
Command help
Walk pm1001lhrMesrxfp1LiRxPowerMeasTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1001lhr-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1001lhr-MIB::pm1001lhrMesrxfp1LiRxPowerMeasTable' 
List of pm1001lhrMesrxfp1LiRxPowerMeas 
Article
pm1001lhrMesrxfp1LiRxPowerMeasEntry row .1.3.6.1.4.1.20044.22.3.3.212.1
Row definition for the pm1001lhrMesrxfp1LiRxPowerMeas
table
Indexes
Column Syntax OID
pm1001lhrMesrxfp1LiRxPowerMeasIndex
Index definition for the pm1001lhrMesrxfp1LiRxPowerMeas
table
Integer32
Constraints:
range: 0-128
 .1.3.6.1.4.1.20044.22.3.3.212.1.1
pm1001lhrMesrxfp1LiRxPowerMeasPortn
Line Optical Module Rx Power :This
OID gives the receive power value
of the XFP or OTX plugged in line
#n, read from the DDM (Digital
Diagnostic Monitoring) (Power
= 10*log(AV)-40) (Unit = dBm)
<Help> This measu…
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.20044.22.3.3.212.1.2

pm1001lhrMesrxfp1LxAux1MeasTable

table deprecated
.1.3.6.1.4.1.20044.22.3.3.213 · 1 row entry · 2 columns
Open in standard view
Uses the ekinops variant from /opt/observium/mibs/ekinops.
Command help
Walk pm1001lhrMesrxfp1LxAux1MeasTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1001lhr-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1001lhr-MIB::pm1001lhrMesrxfp1LxAux1MeasTable' 
List of pm1001lhrMesrxfp1LxAux1Meas 
Article
pm1001lhrMesrxfp1LxAux1MeasEntry row .1.3.6.1.4.1.20044.22.3.3.213.1
Row definition for the pm1001lhrMesrxfp1LxAux1Meas
table
Indexes
Column Syntax OID
pm1001lhrMesrxfp1LxAux1MeasIndexdeprecated
Index definition for the pm1001lhrMesrxfp1LxAux1Meas
table
Integer32
Constraints:
range: 0-128
 .1.3.6.1.4.1.20044.22.3.3.213.1.1
pm1001lhrMesrxfp1LxAux1MeasPortndeprecated
Not Used :This OID gives the receive
power value read in the DDM (Digital
Diagnostic Monitoring) of the XFP
or OTX plugged in line #n (Unit
= ?)
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.20044.22.3.3.213.1.2

pm1001lhrMesrxfp1LxAux2MeasTable

table deprecated
.1.3.6.1.4.1.20044.22.3.3.214 · 1 row entry · 2 columns
Open in standard view
Uses the ekinops variant from /opt/observium/mibs/ekinops.
Command help
Walk pm1001lhrMesrxfp1LxAux2MeasTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1001lhr-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1001lhr-MIB::pm1001lhrMesrxfp1LxAux2MeasTable' 
List of pm1001lhrMesrxfp1LxAux2Meas 
Article
pm1001lhrMesrxfp1LxAux2MeasEntry row .1.3.6.1.4.1.20044.22.3.3.214.1
Row definition for the pm1001lhrMesrxfp1LxAux2Meas
table
Indexes
Column Syntax OID
pm1001lhrMesrxfp1LxAux2MeasIndexdeprecated
Index definition for the pm1001lhrMesrxfp1LxAux2Meas
table
Integer32
Constraints:
range: 0-128
 .1.3.6.1.4.1.20044.22.3.3.214.1.1
pm1001lhrMesrxfp1LxAux2MeasPortndeprecated
Not Used :This OID gives the receive
power value read in the DDM (Digital
Diagnostic Monitoring) of the XFP
or OTX plugged in line #n (Unit
= ?)
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.20044.22.3.3.214.1.2

pm1001lhrMesrotx1AgingTable

table
.1.3.6.1.4.1.20044.22.3.3.224 · 1 row entry · 2 columns
Open in standard view
Uses the ekinops variant from /opt/observium/mibs/ekinops.
Command help
Walk pm1001lhrMesrotx1AgingTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1001lhr-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1001lhr-MIB::pm1001lhrMesrotx1AgingTable' 
List of pm1001lhrMesrotx1Aging 
Article
pm1001lhrMesrotx1AgingEntry row .1.3.6.1.4.1.20044.22.3.3.224.1
Row definition for the pm1001lhrMesrotx1Aging
table
Indexes
Column Syntax OID
pm1001lhrMesrotx1AgingIndex
Index definition for the pm1001lhrMesrotx1Aging
table
Integer32
Constraints:
range: 0-128
 .1.3.6.1.4.1.20044.22.3.3.224.1.1
pm1001lhrMesrotx1AgingPortn
Line OTX TLH Aging :This OID gives
the aging of the Line OTX TLH,
read from the DDM (Digital Diagnostic
Monitoring) (Aging = AV) (Unit
= %) <Help> This measure gives
the aging of the Line OTX TLH
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.20044.22.3.3.224.1.2

pm1001lhrMesrotx1LaserTemperatureTable

table deprecated
.1.3.6.1.4.1.20044.22.3.3.225 · 1 row entry · 2 columns
Open in standard view
Uses the ekinops variant from /opt/observium/mibs/ekinops.
Command help
Walk pm1001lhrMesrotx1LaserTemperatureTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1001lhr-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1001lhr-MIB::pm1001lhrMesrotx1LaserTemperatureTable' 
List of pm1001lhrMesrotx1LaserTemperature 
Article
pm1001lhrMesrotx1LaserTemperatureEntry row .1.3.6.1.4.1.20044.22.3.3.225.1
Row definition for the pm1001lhrMesrotx1LaserTemperature
table
Indexes
Column Syntax OID
pm1001lhrMesrotx1LaserTemperatureIndexdeprecated
Index definition for the pm1001lhrMesrotx1LaserTemperature
table
Integer32
Constraints:
range: 0-128
 .1.3.6.1.4.1.20044.22.3.3.225.1.1
pm1001lhrMesrotx1LaserTemperaturePortndeprecated
Line OTX TLH Laser Temperature
:This OID gives the laser temperature
of the Line OTX TLH, read from
the DDM (Digital Diagnostic Monitoring)
(Temperature = AV/256) (Unit =
C) <Help> This measure gives
the laser …
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.20044.22.3.3.225.1.2

pm1001lhrMesrotx1FreqDeviationTable

table
.1.3.6.1.4.1.20044.22.3.3.226 · 1 row entry · 2 columns
Open in standard view
Uses the ekinops variant from /opt/observium/mibs/ekinops.
Command help
Walk pm1001lhrMesrotx1FreqDeviationTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1001lhr-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1001lhr-MIB::pm1001lhrMesrotx1FreqDeviationTable' 
List of pm1001lhrMesrotx1FreqDeviation 
Article
pm1001lhrMesrotx1FreqDeviationEntry row .1.3.6.1.4.1.20044.22.3.3.226.1
Row definition for the pm1001lhrMesrotx1FreqDeviation
table
Indexes
Column Syntax OID
pm1001lhrMesrotx1FreqDeviationIndex
Index definition for the pm1001lhrMesrotx1FreqDeviation
table
Integer32
Constraints:
range: 0-128
 .1.3.6.1.4.1.20044.22.3.3.226.1.1
pm1001lhrMesrotx1FreqDeviationPortn
Line OTX TLH Frequency Deviation
:This OID gives the frequency deviation
of the Line OTX TLH, read from
the DDM (Digital Diagnostic Monitoring)
(Deviation = (AV-32768)*100) (Unit
= MHz) <Help> This measure gives…
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.20044.22.3.3.226.1.2

pm1001lhrMesrotx1LaserWvlengthTable

table
.1.3.6.1.4.1.20044.22.3.3.227 · 1 row entry · 2 columns
Open in standard view
Uses the ekinops variant from /opt/observium/mibs/ekinops.
Command help
Walk pm1001lhrMesrotx1LaserWvlengthTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1001lhr-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1001lhr-MIB::pm1001lhrMesrotx1LaserWvlengthTable' 
List of pm1001lhrMesrotx1LaserWvlength 
Article
pm1001lhrMesrotx1LaserWvlengthEntry row .1.3.6.1.4.1.20044.22.3.3.227.1
Row definition for the pm1001lhrMesrotx1LaserWvlength
table
Indexes
Column Syntax OID
pm1001lhrMesrotx1LaserWvlengthIndex
Index definition for the pm1001lhrMesrotx1LaserWvlength
table
Integer32
Constraints:
range: 0-128
 .1.3.6.1.4.1.20044.22.3.3.227.1.1
pm1001lhrMesrotx1LaserWvlengthPortn
Line Optical Module Wavelength
:This OID gives the laser wavelength
of the Line OTX TLH, read from
the DDM (Digital Diagnostic Monitoring)
(Wavelength=299792458/((193,100+(AV-32768
)*12,5)*10 3)) (Unit = nm) <Hel…
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.20044.22.3.3.227.1.2

pm1001lhrCntdfrmB1ErrCntTable

table
.1.3.6.1.4.1.20044.22.4.3.152 · 1 row entry · 4 columns
Open in standard view
Uses the ekinops variant from /opt/observium/mibs/ekinops.
Command help
Walk pm1001lhrCntdfrmB1ErrCntTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1001lhr-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1001lhr-MIB::pm1001lhrCntdfrmB1ErrCntTable' 
List of pm1001lhrCntdfrmB1ErrCnt 
Article
pm1001lhrCntdfrmB1ErrCntEntry row .1.3.6.1.4.1.20044.22.4.3.152.1
Row definition for the pm1001lhrCntdfrmB1ErrCnt
table
Indexes
Column Syntax OID
pm1001lhrCntdfrmB1ErrCntIndex
Index definition for the pm1001lhrCntdfrmB1ErrCnt
table
Integer32
Constraints:
range: 0-128
 .1.3.6.1.4.1.20044.22.4.3.152.1.1
pm1001lhrCntdfrmB1ErrCntValuePortn
Line Input SM-BIP8 Errors :This
counter is incremented each time
a B1 error is detected on the Deframer
input stream. <Help> This counter
gives the number of B1 errors on
the line port
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20044.22.4.3.152.1.2
pm1001lhrCntdfrmB1ErrCntErrorPortn
Line Counter Error :This OID when
set indicates the B1 error counter
value is invalid on Port
EKINOPS-MIBEkiOnOff
Type Values:
1off
2on
 .1.3.6.1.4.1.20044.22.4.3.152.1.3
pm1001lhrCntdfrmB1ErrCntOverloadPortn
Line Counter Overload :This OID
when set indicates a B1 error counter
overload on Port
EKINOPS-MIBEkiOnOff
Type Values:
1off
2on
 .1.3.6.1.4.1.20044.22.4.3.152.1.4

pm1001lhrCntdfrmTimCntTable

table
.1.3.6.1.4.1.20044.22.4.3.153 · 1 row entry · 4 columns
Open in standard view
Uses the ekinops variant from /opt/observium/mibs/ekinops.
Command help
Walk pm1001lhrCntdfrmTimCntTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1001lhr-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1001lhr-MIB::pm1001lhrCntdfrmTimCntTable' 
List of pm1001lhrCntdfrmTimCnt 
Article
pm1001lhrCntdfrmTimCntEntry row .1.3.6.1.4.1.20044.22.4.3.153.1
Row definition for the pm1001lhrCntdfrmTimCnt
table
Indexes
Column Syntax OID
pm1001lhrCntdfrmTimCntIndex
Index definition for the pm1001lhrCntdfrmTimCnt
table
Integer32
Constraints:
range: 0-128
 .1.3.6.1.4.1.20044.22.4.3.153.1.1
pm1001lhrCntdfrmTimCntValuePortn
Line Timer Counter :This is the
timing counter dedicated to the
downstream deframer counters. It
is incremented every 125 us.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20044.22.4.3.153.1.2
pm1001lhrCntdfrmTimCntErrorPortn
Line Counter Error :This OID when
set indicates the deframer timer
counter value is invalid on Port
EKINOPS-MIBEkiOnOff
Type Values:
1off
2on
 .1.3.6.1.4.1.20044.22.4.3.153.1.3
pm1001lhrCntdfrmTimCntOverloadPortn
Line Counter Overload :This OID
when set indicates a deframer timer
counter overload on Port
EKINOPS-MIBEkiOnOff
Type Values:
1off
2on
 .1.3.6.1.4.1.20044.22.4.3.153.1.4

pm1001lhrCntdfrmPrimLineErrCntTable

table
.1.3.6.1.4.1.20044.22.4.3.154 · 1 row entry · 4 columns
Open in standard view
Uses the ekinops variant from /opt/observium/mibs/ekinops.
Command help
Walk pm1001lhrCntdfrmPrimLineErrCntTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1001lhr-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1001lhr-MIB::pm1001lhrCntdfrmPrimLineErrCntTable' 
List of pm1001lhrCntdfrmPrimLineErrCnt 
Article
pm1001lhrCntdfrmPrimLineErrCntEntry row .1.3.6.1.4.1.20044.22.4.3.154.1
Row definition for the pm1001lhrCntdfrmPrimLineErrCnt
table
Indexes
Column Syntax OID
pm1001lhrCntdfrmPrimLineErrCntIndex
Index definition for the pm1001lhrCntdfrmPrimLineErrCnt
table
Integer32
Constraints:
range: 0-128
 .1.3.6.1.4.1.20044.22.4.3.154.1.1
pm1001lhrCntdfrmPrimLineErrCntValuePortn
Line Input FEC Corrected Errors
:This counter is incremented each
time the FEC is correcting an error
on the line input stream. <Help>
This counter gives the number
of errors corrected by the FEC
on the line port
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20044.22.4.3.154.1.2
pm1001lhrCntdfrmPrimLineErrCntErrorPortn
FEC Counter Error :This bit when
set indicates the FEC corrected
errors counter value is invalid
on Line
EKINOPS-MIBEkiOnOff
Type Values:
1off
2on
 .1.3.6.1.4.1.20044.22.4.3.154.1.3
pm1001lhrCntdfrmPrimLineErrCntOverloadPortn
FEC Counter Overload :This bit
when set indicates a FEC corrected
errors counter overload on Line
EKINOPS-MIBEkiOnOff
Type Values:
1off
2on
 .1.3.6.1.4.1.20044.22.4.3.154.1.4

pm1001lhrCtrlaccessLoopTable

table
.1.3.6.1.4.1.20044.22.6.2.16 · 1 row entry · 2 columns
Open in standard view
Uses the ekinops variant from /opt/observium/mibs/ekinops.
Command help
Walk pm1001lhrCtrlaccessLoopTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1001lhr-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1001lhr-MIB::pm1001lhrCtrlaccessLoopTable' 
List of pm1001lhrCtrlaccessLoop 
Article
pm1001lhrCtrlaccessLoopEntry row .1.3.6.1.4.1.20044.22.6.2.16.1
Row definition for the pm1001lhrCtrlaccessLoop
table
Indexes
Column Syntax OID
pm1001lhrCtrlaccessLoopIndex
Index definition for the pm1001lhrCtrlaccessLoop
table
Integer32
Constraints:
range: 0-128
 .1.3.6.1.4.1.20044.22.6.2.16.1.1
pm1001lhrCtrlaccessLoopPortn
Client Facility Loopback :This
OID operates a Client Facility
Loopback, looping client input
signal on the client output port.
The loop is located on the client
transceiver <Help> This maintenance
parameter opera…
EKINOPS-MIBEkiStater/w
Type Values:
1disabled
2enabled
 .1.3.6.1.4.1.20044.22.6.2.16.1.2

pm1001lhrCtrlclientAccessTermLoopTable

table
.1.3.6.1.4.1.20044.22.6.2.26 · 1 row entry · 2 columns
Open in standard view
Uses the ekinops variant from /opt/observium/mibs/ekinops.
Command help
Walk pm1001lhrCtrlclientAccessTermLoopTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1001lhr-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1001lhr-MIB::pm1001lhrCtrlclientAccessTermLoopTable' 
List of pm1001lhrCtrlclientAccessTermLoop 
Article
pm1001lhrCtrlclientAccessTermLoopEntry row .1.3.6.1.4.1.20044.22.6.2.26.1
Row definition for the pm1001lhrCtrlclientAccessTermLoop
table
Indexes
Column Syntax OID
pm1001lhrCtrlclientAccessTermLoopIndex
Index definition for the pm1001lhrCtrlclientAccessTermLoop
table
Integer32
Constraints:
range: 0-128
 .1.3.6.1.4.1.20044.22.6.2.26.1.1
pm1001lhrCtrlclientAccessTermLoopPortn
Client Terminal Loopback :This
OID operates a Client Terminal
Loopback, looping client input
signal on the client output port.
The loop is located on the line
transceiver <Help> This maintenance
parameter operate…
EKINOPS-MIBEkiStater/w
Type Values:
1disabled
2enabled
 .1.3.6.1.4.1.20044.22.6.2.26.1.2

pm1001lhrCtrlfecDisableTable

table
.1.3.6.1.4.1.20044.22.6.3.69 · 1 row entry · 2 columns
Open in standard view
Uses the ekinops variant from /opt/observium/mibs/ekinops.
Command help
Walk pm1001lhrCtrlfecDisableTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1001lhr-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1001lhr-MIB::pm1001lhrCtrlfecDisableTable' 
List of pm1001lhrCtrlfecDisable 
Article
pm1001lhrCtrlfecDisableEntry row .1.3.6.1.4.1.20044.22.6.3.69.1
Row definition for the pm1001lhrCtrlfecDisable
table
Indexes
Column Syntax OID
pm1001lhrCtrlfecDisableIndex
Index definition for the pm1001lhrCtrlfecDisable
table
Integer32
Constraints:
range: 0-128
 .1.3.6.1.4.1.20044.22.6.3.69.1.1
pm1001lhrCtrlfecDisablePortn
Forward Error Correction Inhibition
:This OID, when set, inhibits the
Forward Error Correction feature
on the line input <Help> This
control disables the Forward Error
Correction on the line input signal.
EKINOPS-MIBEkiStater/w
Type Values:
1disabled
2enabled
 .1.3.6.1.4.1.20044.22.6.3.69.1.2

pm1001lhrCtrllineOosModeTable

table
.1.3.6.1.4.1.20044.22.6.3.74 · 1 row entry · 2 columns
Open in standard view
Uses the ekinops variant from /opt/observium/mibs/ekinops.
Command help
Walk pm1001lhrCtrllineOosModeTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1001lhr-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1001lhr-MIB::pm1001lhrCtrllineOosModeTable' 
List of pm1001lhrCtrllineOosMode 
Article
pm1001lhrCtrllineOosModeEntry row .1.3.6.1.4.1.20044.22.6.3.74.1
Row definition for the pm1001lhrCtrllineOosMode
table
Indexes
Column Syntax OID
pm1001lhrCtrllineOosModeIndex
Index definition for the pm1001lhrCtrllineOosMode
table
Integer32
Constraints:
range: 0-128
 .1.3.6.1.4.1.20044.22.6.3.74.1.1
pm1001lhrCtrllineOosModePortn
Line Port Out Of Service :This
OID sets the line port Out Of Service
EKINOPS-MIBEkiStater/w
Type Values:
1disabled
2enabled
 .1.3.6.1.4.1.20044.22.6.3.74.1.2

pm1001lhrCtrlxfpOnoffTable

table
.1.3.6.1.4.1.20044.22.6.3.208 · 1 row entry · 2 columns
Open in standard view
Uses the ekinops variant from /opt/observium/mibs/ekinops.
Command help
Walk pm1001lhrCtrlxfpOnoffTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1001lhr-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1001lhr-MIB::pm1001lhrCtrlxfpOnoffTable' 
List of pm1001lhrCtrlxfpOnoff
Article
pm1001lhrCtrlxfpOnoffEntry row .1.3.6.1.4.1.20044.22.6.3.208.1
Row definition for the pm1001lhrCtrlxfpOnoff
table
Indexes
Column Syntax OID
pm1001lhrCtrlxfpOnoffIndex
Index definition for the pm1001lhrCtrlxfpOnoff
table
Integer32
Constraints:
range: 0-128
 .1.3.6.1.4.1.20044.22.6.3.208.1.1
pm1001lhrCtrlxfpOnoffPortn
Line Optical Laser Shutdown :This
OID switches off the XFP or the
OTX <Help> This control defines
the laser state of the line transceiver
EKINOPS-MIBEkiStater/w
Type Values:
1disabled
2enabled
 .1.3.6.1.4.1.20044.22.6.3.208.1.2

pm1001lhrCtrlxfpLineLoopTable

table
.1.3.6.1.4.1.20044.22.6.3.209 · 1 row entry · 2 columns
Open in standard view
Uses the ekinops variant from /opt/observium/mibs/ekinops.
Command help
Walk pm1001lhrCtrlxfpLineLoopTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1001lhr-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1001lhr-MIB::pm1001lhrCtrlxfpLineLoopTable' 
List of pm1001lhrCtrlxfpLineLoop 
Article
pm1001lhrCtrlxfpLineLoopEntry row .1.3.6.1.4.1.20044.22.6.3.209.1
Row definition for the pm1001lhrCtrlxfpLineLoop
table
Indexes
Column Syntax OID
pm1001lhrCtrlxfpLineLoopIndex
Index definition for the pm1001lhrCtrlxfpLineLoop
table
Integer32
Constraints:
range: 0-128
 .1.3.6.1.4.1.20044.22.6.3.209.1.1
pm1001lhrCtrlxfpLineLoopPortn
Line Facility Loopback :This OID
operates a Line Facility Loopback,
looping line input signal on the
line output port. The loop is located
on the line transceiver. If the
Line signal carries DCC, the management
ne…
EKINOPS-MIBEkiStater/w
Type Values:
1disabled
2enabled
 .1.3.6.1.4.1.20044.22.6.3.209.1.2

pm1001lhrCtrlxfpXfiLoopTable

table
.1.3.6.1.4.1.20044.22.6.3.210 · 1 row entry · 2 columns
Open in standard view
Uses the ekinops variant from /opt/observium/mibs/ekinops.
Command help
Walk pm1001lhrCtrlxfpXfiLoopTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1001lhr-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1001lhr-MIB::pm1001lhrCtrlxfpXfiLoopTable' 
List of pm1001lhrCtrlxfpXfiLoop 
Article
pm1001lhrCtrlxfpXfiLoopEntry row .1.3.6.1.4.1.20044.22.6.3.210.1
Row definition for the pm1001lhrCtrlxfpXfiLoop
table
Indexes
Column Syntax OID
pm1001lhrCtrlxfpXfiLoopIndex
Index definition for the pm1001lhrCtrlxfpXfiLoop
table
Integer32
Constraints:
range: 0-128
 .1.3.6.1.4.1.20044.22.6.3.210.1.1
pm1001lhrCtrlxfpXfiLoopPortn
Line Terminal Loopback :This OID
operates a Line Terminal Loopback,
looping line input signal on the
line output port. The loop is located
on all client transceivers <Help>
This maintenance parameter operates
a L…
EKINOPS-MIBEkiStater/w
Type Values:
1disabled
2enabled
 .1.3.6.1.4.1.20044.22.6.3.210.1.2

pm1001lhrCtrllineTunableChannelTable

table
.1.3.6.1.4.1.20044.22.6.3.212 · 1 row entry · 2 columns
Open in standard view
Uses the ekinops variant from /opt/observium/mibs/ekinops.
Command help
Walk pm1001lhrCtrllineTunableChannelTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1001lhr-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1001lhr-MIB::pm1001lhrCtrllineTunableChannelTable' 
List of pm1001lhrCtrllineTunableChannel 
Article
pm1001lhrCtrllineTunableChannelEntry row .1.3.6.1.4.1.20044.22.6.3.212.1
Row definition for the pm1001lhrCtrllineTunableChannel
table
Indexes
Column Syntax OID
pm1001lhrCtrllineTunableChannelIndex
Index definition for the pm1001lhrCtrllineTunableChannel
table
Integer32
Constraints:
range: 0-128
 .1.3.6.1.4.1.20044.22.6.3.212.1.1
pm1001lhrCtrllineTunableChannelPortn
ITU Channel :This OID selects
the ITU channel of the Line OTX
TLH Laser <Help> This control
defines the ITU channel of the
Line OTX TLH Laser
r/w .1.3.6.1.4.1.20044.22.6.3.212.1.2

pm1001lhrCtrllinePhotodiodeModeTable

table
.1.3.6.1.4.1.20044.22.6.3.213 · 1 row entry · 2 columns
Open in standard view
Uses the ekinops variant from /opt/observium/mibs/ekinops.
Command help
Walk pm1001lhrCtrllinePhotodiodeModeTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1001lhr-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1001lhr-MIB::pm1001lhrCtrllinePhotodiodeModeTable' 
List of pm1001lhrCtrllinePhotodiodeMode 
Article
pm1001lhrCtrllinePhotodiodeModeEntry row .1.3.6.1.4.1.20044.22.6.3.213.1
Row definition for the pm1001lhrCtrllinePhotodiodeMode
table
Indexes
Column Syntax OID
pm1001lhrCtrllinePhotodiodeModeIndex
Index definition for the pm1001lhrCtrllinePhotodiodeMode
table
Integer32
Constraints:
range: 0-128
 .1.3.6.1.4.1.20044.22.6.3.213.1.1
pm1001lhrCtrllinePhotodiodeModePortn
OTX TLH Rx Sens. Mode :This OID
defines the Rx sensiblity mode
of the Line OTX TLH <Help>
This control defines the receiver
sensibility mode of the Line OTX
TLH Laser (OTX60, OTX80 or Custom)
r/w .1.3.6.1.4.1.20044.22.6.3.213.1.2

pm1001lhrCtrllinePhotodiodeValueTable

table
.1.3.6.1.4.1.20044.22.6.3.214 · 1 row entry · 2 columns
Open in standard view
Uses the ekinops variant from /opt/observium/mibs/ekinops.
Command help
Walk pm1001lhrCtrllinePhotodiodeValueTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1001lhr-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1001lhr-MIB::pm1001lhrCtrllinePhotodiodeValueTable' 
List of pm1001lhrCtrllinePhotodiodeValue 
Article
pm1001lhrCtrllinePhotodiodeValueEntry row .1.3.6.1.4.1.20044.22.6.3.214.1
Row definition for the pm1001lhrCtrllinePhotodiodeValue
table
Indexes
Column Syntax OID
pm1001lhrCtrllinePhotodiodeValueIndex
Index definition for the pm1001lhrCtrllinePhotodiodeValue
table
Integer32
Constraints:
range: 0-128
 .1.3.6.1.4.1.20044.22.6.3.214.1.1
pm1001lhrCtrllinePhotodiodeValuePortn
OTX TLH Rx Sensibility :This OID
sets the Rx sensibility of the
Line OTX TLH (custom mode only)
<Help> This control defines
the receiver sensibility value
(only in Custom mode) of the Line
OTX TLH Laser
r/w .1.3.6.1.4.1.20044.22.6.3.214.1.2

pm1001lhrCtrllinePowerLaserTable

table
.1.3.6.1.4.1.20044.22.6.3.215 · 1 row entry · 2 columns
Open in standard view
Uses the ekinops variant from /opt/observium/mibs/ekinops.
Command help
Walk pm1001lhrCtrllinePowerLaserTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1001lhr-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1001lhr-MIB::pm1001lhrCtrllinePowerLaserTable' 
List of pm1001lhrCtrllinePowerLaser 
Article
pm1001lhrCtrllinePowerLaserEntry row .1.3.6.1.4.1.20044.22.6.3.215.1
Row definition for the pm1001lhrCtrllinePowerLaser
table
Indexes
Column Syntax OID
pm1001lhrCtrllinePowerLaserIndex
Index definition for the pm1001lhrCtrllinePowerLaser
table
Integer32
Constraints:
range: 0-128
 .1.3.6.1.4.1.20044.22.6.3.215.1.1
pm1001lhrCtrllinePowerLaserPortn
Line Laser Output Power [3-5]
:This OID sets the output power
value on the laser of the Line
OTX TLH (AV=Power*10+158) (Unit
= dBm) <Help> This control defines
the start-up output power of the
Line OTX TLH
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.20044.22.6.3.215.1.2

pm1001lhrRinvLineTable

table
.1.3.6.1.4.1.20044.22.7.1.1 · 1 row entry · 2 columns
Open in standard view
Uses the ekinops variant from /opt/observium/mibs/ekinops.
Command help
Walk pm1001lhrRinvLineTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1001lhr-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1001lhr-MIB::pm1001lhrRinvLineTable' 
List of the XFPs on the selected module
pm1001lhrRinvLineEntry row .1.3.6.1.4.1.20044.22.7.1.1.1
Row definition for the XFP table
Indexes
Column Syntax OID
pm1001lhrRinvLineIndex
Index for XFP table
Integer32
Constraints:
range: 1-16
 .1.3.6.1.4.1.20044.22.7.1.1.1.1
pm1001lhrRinvxfpLine
Inventory for the XFP: This OID contains the inventory for the XFP
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20044.22.7.1.1.1.2

pm1001lhrCfgXfpTable

table
.1.3.6.1.4.1.20044.22.9.2.2 · 1 row entry · 3 columns
Open in standard view
Uses the ekinops variant from /opt/observium/mibs/ekinops.
Command help
Walk pm1001lhrCfgXfpTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1001lhr-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1001lhr-MIB::pm1001lhrCfgXfpTable' 
List of  Article
pm1001lhrCfgXfpEntry row .1.3.6.1.4.1.20044.22.9.2.2.1
Row definition for the startup
table
Indexes
Column Syntax OID
pm1001lhrCfgXfpIndex
Index definition for the xfp table
Integer32
Constraints:
range: 0-128
 .1.3.6.1.4.1.20044.22.9.2.2.1.1
pm1001lhrCfgSystConfXfpPortn
Default settings on XFP Port :This
register configures the default
initialisation settings on XFP
port.
Unsigned32r/w
Constraints:
range: 0-65536
 .1.3.6.1.4.1.20044.22.9.2.2.1.3
pm1001lhrCfgDataRateConfXfpPortndeprecated
:
Unsigned32r/w
Constraints:
range: 0-65536
 .1.3.6.1.4.1.20044.22.9.2.2.1.4

pm1001lhrCfgLabelclientTable

table
.1.3.6.1.4.1.20044.22.9.3.1 · 1 row entry · 2 columns
Open in standard view
Uses the ekinops variant from /opt/observium/mibs/ekinops.
Command help
Walk pm1001lhrCfgLabelclientTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1001lhr-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1001lhr-MIB::pm1001lhrCfgLabelclientTable' 
List of  Article
pm1001lhrCfgLabelclientEntry row .1.3.6.1.4.1.20044.22.9.3.1.1
Row definition for the labels
table
Indexes
Column Syntax OID
pm1001lhrCfgLabelclientIndex
Index definition for the labelclient
table
Integer32
Constraints:
range: 0-128
 .1.3.6.1.4.1.20044.22.9.3.1.1.1
pm1001lhrCfgLabelclientPortn
Default settings on the label
of the Ports :These registers
configures the default initialisation
settings of the labels of the ports.
SNMPv2-TCDisplayStringr/w
Constraints:
range: 1-16
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20044.22.9.3.1.1.3

pm1001lhrCfgLabellineTable

table
.1.3.6.1.4.1.20044.22.9.3.2 · 1 row entry · 2 columns
Open in standard view
Uses the ekinops variant from /opt/observium/mibs/ekinops.
Command help
Walk pm1001lhrCfgLabellineTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1001lhr-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1001lhr-MIB::pm1001lhrCfgLabellineTable' 
List of  Article
pm1001lhrCfgLabellineEntry row .1.3.6.1.4.1.20044.22.9.3.2.1
Row definition for the labels
table
Indexes
Column Syntax OID
pm1001lhrCfgLabellineIndex
Index definition for the labelline
table
Integer32
Constraints:
range: 0-128
 .1.3.6.1.4.1.20044.22.9.3.2.1.1
pm1001lhrCfgLabellinePortn
Default settings on the label
of the lines :These registers
configures the default initialisation
settings of the labels of the lines.
SNMPv2-TCDisplayStringr/w
Constraints:
range: 1-16
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20044.22.9.3.2.1.3

pm1001lhrCfgOtxtlhTable

table
.1.3.6.1.4.1.20044.22.9.4.1 · 1 row entry · 11 columns
Open in standard view
Uses the ekinops variant from /opt/observium/mibs/ekinops.
Command help
Walk pm1001lhrCfgOtxtlhTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1001lhr-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1001lhr-MIB::pm1001lhrCfgOtxtlhTable' 
List of  Article
pm1001lhrCfgOtxtlhEntry row .1.3.6.1.4.1.20044.22.9.4.1.1
Row definition for the startuptlh
table
Indexes
Column Syntax OID
pm1001lhrCfgOtxtlhIndex
Index definition for the otxtlh
table
Integer32
Constraints:
range: 0-128
 .1.3.6.1.4.1.20044.22.9.4.1.1.1
pm1001lhrCfgNuPortndeprecated
:
Unsigned32r/w
Constraints:
range: 0-65536
 .1.3.6.1.4.1.20044.22.9.4.1.1.3
pm1001lhrCfgLineDitherRatePortn
Default Line OTX TLH FM amplitude
:This register configures the start-up
width of the frequency modulation
of the Line OTX TLH
Unsigned32r/w
Constraints:
range: 0-65536
 .1.3.6.1.4.1.20044.22.9.4.1.1.4
pm1001lhrCfgLineDitherFhzPortn
Default Line OTX TLH FM frequency
:This register configures the start-up
frequency of the frequency modulation
of the Line OTX TLH
Unsigned32r/w
Constraints:
range: 0-65536
 .1.3.6.1.4.1.20044.22.9.4.1.1.5
pm1001lhrCfgLinePwrLaserPortn
Defaut Line OTX TLH output Power
:This register configures the start-up
output power of the Line OTX TLH
(Unit = dBm)
Unsigned32r/w
Constraints:
range: 0-65536
 .1.3.6.1.4.1.20044.22.9.4.1.1.6
pm1001lhrCfgLineFCurrentPortn
Default Line OTX TLH Channel :This
register configures the start-up
laser channel of the Line OTX TLH
Unsigned32r/w
Constraints:
range: 0-65536
 .1.3.6.1.4.1.20044.22.9.4.1.1.7
pm1001lhrCfgLineGridCurrentPortn
Default Line OTX TLH Grid :This
register configures the start-up
laser grid of the Line OTX TLH
Unsigned32r/w
Constraints:
range: 0-65536
 .1.3.6.1.4.1.20044.22.9.4.1.1.8
pm1001lhrCfgFPortn
Default Line OTX TLH lowest Freq
:This register configures the start-up
lowest frequency supported on the
Line OTX TLH
Unsigned32r/w
Constraints:
range: 0-65536
 .1.3.6.1.4.1.20044.22.9.4.1.1.9
pm1001lhrCfgReservedPortndeprecated
:
Unsigned32r/w
Constraints:
range: 0-65536
 .1.3.6.1.4.1.20044.22.9.4.1.1.10
pm1001lhrCfgLinePhotodiodeModePortn
Default Line OTX TLH APD mode
:This register configures the
start-up APD mode of the Line
OTX TLH
Unsigned32r/w
Constraints:
range: 0-65536
 .1.3.6.1.4.1.20044.22.9.4.1.1.11
pm1001lhrCfgLinePhotodiodeValuePortn
Default Line OTX TLH APD atten.
:This register configures the start-up
APD attenuation on the Line OTX
TLH
Unsigned32r/w
Constraints:
range: 0-65536
 .1.3.6.1.4.1.20044.22.9.4.1.1.12

pm1001lhrCfgOtxtlhcapabilitiesTable

table
.1.3.6.1.4.1.20044.22.9.5.1 · 1 row entry · 6 columns
Open in standard view
Uses the ekinops variant from /opt/observium/mibs/ekinops.
Command help
Walk pm1001lhrCfgOtxtlhcapabilitiesTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1001lhr-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1001lhr-MIB::pm1001lhrCfgOtxtlhcapabilitiesTable' 
List of  Article
pm1001lhrCfgOtxtlhcapabilitiesEntry row .1.3.6.1.4.1.20044.22.9.5.1.1
Row definition for the startuptablefive
table
Indexes
Column Syntax OID
pm1001lhrCfgOtxtlhcapabilitiesIndex
Index definition for the otxtlhcapabilities
table
Integer32
Constraints:
range: 0-128
 .1.3.6.1.4.1.20044.22.9.5.1.1.1
pm1001lhrCfgComponentTypePortn
Component parameters :This OID
defines the component parameters
Unsigned32
Constraints:
range: 0-65536
 .1.3.6.1.4.1.20044.22.9.5.1.1.3
pm1001lhrCfgMiscellaneousPortn
Miscellaneous default settings
:This OID defines the miscellaneous
parameters
Unsigned32
Constraints:
range: 0-65536
 .1.3.6.1.4.1.20044.22.9.5.1.1.4
pm1001lhrCfgFirstChannelPortn
Number of the first channel of
the component :This OID defines
the first channel number of the
PM
Unsigned32
Constraints:
range: 0-65536
 .1.3.6.1.4.1.20044.22.9.5.1.1.5
pm1001lhrCfgLastChannelPortn
Number of the last channel of
the component :This OID defines
the last channel number of the
PM
Unsigned32
Constraints:
range: 0-65536
 .1.3.6.1.4.1.20044.22.9.5.1.1.6
pm1001lhrCfgGridPortn
Grid value of the component :This
OID defines the grid of the PM
Unsigned32
Constraints:
range: 0-65536
 .1.3.6.1.4.1.20044.22.9.5.1.1.7