EKINOPS-PMC1002-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
104
Rows
104
Columns
554
.1.3.6.1.4.1.20044.50.2.2.1.48
·
1 row entry
·
9 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1002AlmclientXfpWarningsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-PMC1002-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-PMC1002-MIB::pmc1002AlmclientXfpWarningsTable'
List of pmc1002AlmclientXfpWarnings Article
Row definition for the pmc1002AlmclientXfpWarnings
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmc1002AlmclientXfpWarnings
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.50.2.2.1.48.1.1 |
||||
|
Client Optical Tx Pwr Low Warning
:Warning indicating that the XFP/OTX transmitter transmitter output power is lower than the threshold value written in the XFP/OTX EEPROM <Condtype> CLIENT_TX_POWER_LOW_WARNING <P… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.2.2.1.48.1.2 |
||||
|
Client Optical Tx Pwr High Warning
:Warning indicating that the XFP/OTX transmitter transmitter output power is higher than the threshold value written in the XFP EEPROM <Condtype> CLIENT_TX_POWER_HIGH_WARNING <Pr… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.2.2.1.48.1.3 |
||||
|
Client Transceiver Bias Low Warning
:Warning indicating that the XFP/OTX transmitter laser bias current is lower than the threshold value written in the XFP/OTX EEPROM <Condtype> CLIENT_TX_BIAS_LOW_WARNING <Probcau… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.2.2.1.48.1.4 |
||||
|
Client Transceiver Bias High Warning
:Warning indicating that the XFP/OTX transmitter laser bias current is higher than the threshold value written in the XFP EEPROM <Condtype> CLIENT_TX_BIAS_HIGH_WARNING <Probcaus… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.2.2.1.48.1.5 |
||||
|
Client Transceiver Temp Low Warning
:Warning indicating that the XFP/OTX temperature is lower than the threshold value written in the XFP/OTX EEPROM <Condtype> CLIENT_TEMP_LOW_WARNING <Probcause> temperatureUnaccep… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.2.2.1.48.1.8 |
||||
|
Client Transceiver Temp High Warning
:Warning indicating that the XFP/OTX temperature is higher than the threshold value written in the XFP EEPROM <Condtype> CLIENT_TEMP_HIGH_WARNING <Probcause> temperatureUnaccept… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.2.2.1.48.1.9 |
||||
|
Client Optical Rx Pwr Low Warning
:Warning indicating that the XFP received optical power is lower than the threshold value written in the XFP EEPROM <Condtype> CLIENT_RX_POWER_LOW_WARNING <Probcause> receiveFailu… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.2.2.1.48.1.16 |
||||
|
Client Optical Rx Pwr High Warning
:Warning indicating that the XFP received optical power is higher than the threshold value written in the XFP EEPROM <Condtype> CLIENT_RX_POWER_HIGH_WARNING <Probcause> receiveFai… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.2.2.1.48.1.17 |
.1.3.6.1.4.1.20044.50.2.2.2.32
·
1 row entry
·
9 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1002AlmclientXfpAlarm1Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-PMC1002-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-PMC1002-MIB::pmc1002AlmclientXfpAlarm1Table'
List of pmc1002AlmclientXfpAlarm1 Article
Row definition for the pmc1002AlmclientXfpAlarm1
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmc1002AlmclientXfpAlarm1
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.50.2.2.2.32.1.1 |
||||
|
Client Optical Tx Power Low :Alarm
indicating that the XFP/OTX transmitter transmitter output power is lower than the threshold value written in the XFP/OTX EEPROM <Condtype> CLIENT_TX_POWER_LOW_ALARM <Probcause> … |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.2.2.2.32.1.2 |
||||
|
Client Optical Tx Power High :Alarm
indicating that the XFP/OTX transmitter transmitter output power is higher than the threshold value written in the XFP EEPROM <Condtype> CLIENT_TX_POWER_HIGH_ALARM <Probcause> tr… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.2.2.2.32.1.3 |
||||
|
Client Transceiver Bias Low :Alarm
indicating that the XFP/OTX transmitter laser bias current is lower than the threshold value written in the XFP/OTX EEPROM <Condtype> CLIENT_TX_BIAS_LOW_ALARM <Probcause> transmi… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.2.2.2.32.1.4 |
||||
|
Client Transceiver Bias High :Alarm
indicating that the XFP/OTX transmitter laser bias current is higher than the threshold value written in the XFP EEPROM <Condtype> CLIENT_TX_BIAS_HIGH_ALARM <Probcause> transmitt… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.2.2.2.32.1.5 |
||||
|
Client Transceiver Temp Low :Alarm
indicating that the XFP/OTX temperature is lower than the threshold value written in the XFP/OTX EEPROM <Condtype> CLIENT_TEMP_LOW_ALARM <Probcause> temperatureUnacceptable (51) <… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.2.2.2.32.1.8 |
||||
|
Client Transceiver Temp High :Alarm
indicating that the XFP/OTX temperature is higher than the threshold value written in the XFP EEPROM <Condtype> CLIENT_TEMP_HIGH_ALARM <Probcause> temperatureUnacceptable (51) <A… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.2.2.2.32.1.9 |
||||
|
Client Optical Rx Power Low :Alarm
indicating that the XFP received optical power is lower than the threshold value written in the XFP EEPROM <Condtype> CLIENT_RX_POWER_LOW_ALARM <Probcause> receiveFailure (41) <… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.2.2.2.32.1.16 |
||||
|
Client Optical Rx Power High :Alarm
indicating that the XFP received optical power is higher than the threshold value written in the XFP EEPROM <Condtype> CLIENT_RX_POWER_HIGH_ALARM <Probcause> receiveFailure (41) … |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.2.2.2.32.1.17 |
.1.3.6.1.4.1.20044.50.2.2.2.64
·
1 row entry
·
17 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1002AlmclientXfpSupplyAlarmTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-PMC1002-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-PMC1002-MIB::pmc1002AlmclientXfpSupplyAlarmTable'
List of pmc1002AlmclientXfpSupplyAlarm Article
Row definition for the pmc1002AlmclientXfpSupplyAlarm
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmc1002AlmclientXfpSupplyAlarm
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.50.2.2.2.64.1.1 |
||||
|
VEE5 Power Supply Low :Alarm indicating
the XFP/OTX VEE5 power supply is lower than the threshold written in the EEPROM <Condtype> CLIENT_VEE5_LOW_ALARM <Probcause> powerProblem (36) <Alarmtype> equipmentAlarm (5) … |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.2.2.2.64.1.2 |
||||
|
VEE5 Power Supply High :Alarm
indicating the XFP/OTX VEE5 power supply is higher than the threshold written in the EEPROM <Condtype> CLIENT_VEE5_HIGH_ALARM <Probcause> powerProblem (36) <Alarmtype> equipmentAlarm … |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.2.2.2.64.1.3 |
||||
|
VCC2 Power Supply Low :Alarm indicating
the XFP/OTX VCC2 power supply is lower than the threshold written in the EEPROM <Condtype> CLIENT_VCC2_LOW_ALARM <Probcause> powerProblem (36) <Alarmtype> equipmentAlarm (5) … |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.2.2.2.64.1.4 |
||||
|
VCC2 Power Supply High :Alarm
indicating the XFP/OTX VCC2 power supply is higher than the threshold written in the EEPROM <Condtype> CLIENT_VCC2_HIGH_ALARM <Probcause> powerProblem (36) <Alarmtype> equipmentAlarm … |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.2.2.2.64.1.5 |
||||
|
VCC3 Power Supply Low :Alarm indicating
the XFP/OTX VCC3 power supply is lower than the threshold written in the EEPROM <Condtype> CLIENT_VCC3_LOW_ALARM <Probcause> powerProblem (36) <Alarmtype> equipmentAlarm (5) … |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.2.2.2.64.1.6 |
||||
|
VCC3 Power Supply High :Alarm
indicating the XFP/OTX VCC3 power supply is higher than the threshold written in the EEPROM <Condtype> CLIENT_VCC3_HIGH_ALARM <Probcause> powerProblem (36) <Alarmtype> equipmentAlarm … |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.2.2.2.64.1.7 |
||||
|
VCC5 Power Supply Low :Alarm indicating
the XFP/OTX VCC5 power supply is lower than the threshold written in the EEPROM <Condtype> CLIENT_VCC5_LOW_ALARM <Probcause> powerProblem (36) <Alarmtype> equipmentAlarm (5) … |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.2.2.2.64.1.8 |
||||
|
VCC5 Power Supply High :Alarm
indicating the XFP/OTX VCC5 power supply is higher than the threshold written in the EEPROM <Condtype> CLIENT_VCC5_HIGH_ALARM <Probcause> powerProblem (36) <Alarmtype> equipmentAlarm … |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.2.2.2.64.1.9 |
||||
|
VEE5 Power Supply Low Warning
:Warning indicating the XFP/OTX VEE5 power supply is lower than the threshold written in the EEPROM <Condtype> CLIENT_VEE5_LOW_WARNING <Probcause> powerProblem (36) <Alarmtype> equipm… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.2.2.2.64.1.10 |
||||
|
VEE5 Power Supply High Warning
:Warning indicating the XFP/OTX VEE5 power supply is higher than the threshold written in the EEPROM <Condtype> CLIENT_VEE5_HIGH_WARNING <Probcause> powerProblem (36) <Alarmtype> equ… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.2.2.2.64.1.11 |
||||
|
VCC2 Power Supply Low Warning
:Warning indicating the XFP/OTX VCC2 power supply is lower than the threshold written in the EEPROM <Condtype> CLIENT_VCC2_LOW_WARNING <Probcause> powerProblem (36) <Alarmtype> equipm… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.2.2.2.64.1.12 |
||||
|
VCC2 Power Supply High Warning
:Warning indicating the XFP/OTX VCC2 power supply is higher than the threshold written in the EEPROM <Condtype> CLIENT_VCC2_HIGH_WARNING <Probcause> powerProblem (36) <Alarmtype> equ… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.2.2.2.64.1.13 |
||||
|
VCC3 Power Supply Low Warning
:Warning indicating the XFP/OTX VCC3 power supply is lower than the threshold written in the EEPROM <Condtype> CLIENT_VCC3_LOW_WARNING <Probcause> powerProblem (36) <Alarmtype> equipm… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.2.2.2.64.1.14 |
||||
|
VCC3 Power Supply High Warning
:Warning indicating the XFP/OTX VCC3 power supply is higher than the threshold written in the EEPROM <Condtype> CLIENT_VCC3_HIGH_WARNING <Probcause> powerProblem (36) <Alarmtype> equ… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.2.2.2.64.1.15 |
||||
|
VCC5 Power Supply Low Warning
:Warning indicating the XFP/OTX VCC5 power supply is lower than the threshold written in the EEPROM <Condtype> CLIENT_VCC5_LOW_WARNING <Probcause> powerProblem (36) <Alarmtype> equipm… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.2.2.2.64.1.16 |
||||
|
VCC5 Power Supply High Warning
:Warning indicating the XFP/OTX VCC5 power supply is higher than the threshold written in the EEPROM <Condtype> CLIENT_VCC5_HIGH_WARNING <Probcause> powerProblem (36) <Alarmtype> equ… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.2.2.2.64.1.17 |
.1.3.6.1.4.1.20044.50.2.2.3.8
·
1 row entry
·
11 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1002AlmsynthAlmPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-PMC1002-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-PMC1002-MIB::pmc1002AlmsynthAlmPortTable'
List of pmc1002AlmsynthAlmPort Article
Row definition for the pmc1002AlmsynthAlmPort
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmc1002AlmsynthAlmPort
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.50.2.2.3.8.1.1 |
||||
|
Client Optical Module Absent :This
OID indicates that the XFP module is not present in the client port. <Help> This alarm indicates if the client transceiver is present. <Condtype> CLIENT_SFP_ABSENT <Probcause> … |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.2.2.3.8.1.2 |
||||
|
DDM Supported On Client SFP+ :This
OID indicates that the client optical interface (XFP or OTX) is not operational. <Help> This status indicates if the client transceiver has been correctly initialized <Condtype>… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.2.2.3.8.1.3 |
||||
|
Client HW Fail :This OID indicates
a failure on client port, most probably caused by a HW issue. <Condtype> CLIENT_HW_FAIL <Probcause> equipmentMalfunction (16) <Alarmtype> synthesisAlarm (12) <Polarity> (2) |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.2.2.3.8.1.5 |
||||
|
Client Optical Laser Shutdown
:This OID indicates the Client XFP transmitter output is ON. <Help> This status indicates if the client transceiver laser is ON or OFF <Condtype> CLIENT_DW_LSD <Probcause> other (1… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.2.2.3.8.1.6 |
||||
|
Local Client Port In Service :This
OID indicates that the local Client port is In Service (1) or Out of Service (2) <Help> This status indicates if the local client port is in service <Condtype> CLIENT_LOCAL_OOS … |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.2.2.3.8.1.7 |
||||
|
Client AIS Inserted :This OID
indicates a CAIS has been inserted on the output client port. <Help> This status indicates if a Client Alarm Indication Signal is currently inserted on the client interface <Condtyp… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.2.2.3.8.1.9 |
||||
|
Warning On Client SFP+ DDM :This
OID indicates a warning is being received from the Client XFP DDM <Help> This alarm indicates if a DDM Warning has been detected on the client transceiver <Condtype> CLIENT_SFP_D… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.2.2.3.8.1.10 |
||||
|
Alarm On Client SFP+ DDM :This
OID indicates an alarm is being received from the Client XFP DDM <Help> This alarm indicates if a DDM Alarm has been detected on the client transceiver <Condtype> CLIENT_SFP_DDM_AL… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.2.2.3.8.1.11 |
||||
|
Client Access Fail :This OID indicates
a failure on the Client port <Condtype> CLIENT_FAIL <Probcause> equipmentMalfunction (16) <Alarmtype> synthesisAlarm (12) <Polarity> (2) |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.2.2.3.8.1.13 |
||||
|
Client Signal Fail Inserted :This
OID indicates a CSF has been inserted in the upstream client port. <Help> This status indicates if a Client Signal Fail is currently inserted on the line signal for this client … |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.2.2.3.8.1.17 |
.1.3.6.1.4.1.20044.50.2.2.3.16
·
1 row entry
·
3 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1002AlmclientAccessioAlmTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-PMC1002-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-PMC1002-MIB::pmc1002AlmclientAccessioAlmTable'
List of pmc1002AlmclientAccessioAlm Article
Row definition for the pmc1002AlmclientAccessioAlm
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmc1002AlmclientAccessioAlm
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.50.2.2.3.16.1.1 |
||||
|
Client XFP Tx Failed :This OID
indicates that the transmitter fails for the XFP plugged into the client port (this alarm reports the transmitter failure alarm generated by the XFPs) <Condtype> CLIENT_DW_LAS_FAIL <… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.2.2.3.16.1.2 |
||||
|
Client Input Loss Of Signal :This
OID indicates that no signal is present on the XFP of the client port <Help> This alarm indicates if an optical signal is detected on the client transceiver input <Condtype> CLI… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.2.2.3.16.1.5 |
.1.3.6.1.4.1.20044.50.2.2.3.40
·
1 row entry
·
10 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1002AlmclientXfpAlarm2Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-PMC1002-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-PMC1002-MIB::pmc1002AlmclientXfpAlarm2Table'
List of pmc1002AlmclientXfpAlarm2 Article
Row definition for the pmc1002AlmclientXfpAlarm2
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmc1002AlmclientXfpAlarm2
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.50.2.2.3.40.1.1 |
||||
|
Client Optical Module Not Ready
:This OID indicates that the module is unable to determine correct data. <Help> This alarm indicates if the Client transceiver is ready <Condtype> CLIENT_MOD_NR <Probcause> receiv… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.2.2.3.40.1.3 |
||||
|
Client Optical Rx CDR Unlocked
:This OID indicates that a loss of lock on the receiving side CDR has been detected <Help> This alarm indicates if the Rx CDR is locked in the Client transceiver <Condtype> CLIENT_… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.2.2.3.40.1.4 |
||||
|
Client Optical Rx Not Ready :This
OID indicates that a condition has arisen leading to invalid data on the receiving side. <Help> This alarm indicates if the Rx part of the Client transceiver is ready <Condtype>… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.2.2.3.40.1.6 |
||||
|
Client Optical Tx CDR Unlocked
:This OID indicates a loss of lock on the transmitting side CDR has been detected. <Help> This alarm indicates if the Tx CDR is locked in the Client transceiver <Condtype> CLIENT_T… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.2.2.3.40.1.7 |
||||
|
Client Optical Tx Failure :This
OID indicates a fault condition on the laser detected by the safety syste <Help> This alarm indicates if the laser of the Client transceiver is in fail condition <Condtype> CLIENT… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.2.2.3.40.1.8 |
||||
|
Client Optical Tx Not Ready :This
OID indicates a condition has arisen leading to invalid data on the transmitting side <Help> This alarm indicates if the Tx part of the Client transceiver is ready <Condtype> CL… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.2.2.3.40.1.9 |
||||
|
Client Optical Tx Wavelength Unlocked
:This OID indicates that the wavelength error is exceeding the manufacturer tolerance <Help> This alarm indicates if the wavelenght of the Client transceiver is locked <Condt… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.2.2.3.40.1.15 |
||||
|
Client Optical Tx Temp Regul.
Failed :This OID indicates a failure on the TEC module <Help> This alarm indicates if the TEC of the Client transceiver is in fail condition <Condtype> CLIENT_TEC_FAULT <Probcause> … |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.2.2.3.40.1.16 |
||||
|
Client Rx Photodiode Power Failed
:This OID indicates a failure on the APD power supply <Help> This alarm indicates if the APD power supply is in fail condition <Condtype> CLIENT_APD_SUPPLY_FAULT <Probcause> rec… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.2.2.3.40.1.17 |
.1.3.6.1.4.1.20044.50.2.2.3.72
·
1 row entry
·
5 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1002AlmclientMapperDeAlmTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-PMC1002-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-PMC1002-MIB::pmc1002AlmclientMapperDeAlmTable'
List of pmc1002AlmclientMapperDeAlm Article
Row definition for the pmc1002AlmclientMapperDeAlm
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmc1002AlmclientMapperDeAlm
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.50.2.2.3.72.1.1 |
||||
|
Client Loss Of Synchronisation
:This OID indicates the upstream client input port is in Loss of Synchronization <Help> This alarms indicates if the input client signal is correctly synchronized with the decoder … |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.2.2.3.72.1.2 |
||||
|
Client Upstream Buffer Overload
:This OID indicates that the rate adaptation buffer for client port is in overload. <Condtype> CLIENT_UP_BUFFER_OVL <Probcause> receiveFailure (41) <Alarmtype> integrityViolation (7… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.2.2.3.72.1.11 |
||||
|
Client Signal Fail Detected :This
OID indicates that a CSF has been detected on client port in the downstream direction <Help> This alarm indicates if a Client Signal Fail has been detected in the incoming line… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.2.2.3.72.1.12 |
||||
|
Client Downstream Buffer Overload
:This OID indicates that the de-mapper buffer for client port is in overload. <Condtype> CLIENT_DW_BUFFER_OVL <Probcause> equipmentMalfunction (16) <Alarmtype> equipmentAlarm (5) … |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.2.2.3.72.1.15 |
.1.3.6.1.4.1.20044.50.2.3.1.209
·
1 row entry
·
9 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1002AlmlineXfp1WarningsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-PMC1002-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-PMC1002-MIB::pmc1002AlmlineXfp1WarningsTable'
List of pmc1002AlmlineXfp1Warnings Article
Row definition for the pmc1002AlmlineXfp1Warnings
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmc1002AlmlineXfp1Warnings
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.50.2.3.1.209.1.1 |
||||
|
Line Optical Tx Power Low Warning
:Warning indicating that the XFP/OTX transmitter transmitter output power is lower than the threshold value written in the XFP/OTX EEPROM <Condtype> LINE_TX_POWER_LOW_WARNING <Pro… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.2.3.1.209.1.2 |
||||
|
Line Optical Tx Power High Warning
:Warning indicating that the XFP/OTX transmitter transmitter output power is higher than the threshold value written in the XFP EEPROM <Condtype> LINE_TX_POWER_HIGH_WARNING <Prob… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.2.3.1.209.1.3 |
||||
|
Line Transceiver Bias Low Warning
:Warning indicating that the XFP/OTX transmitter laser bias current is lower than the threshold value written in the XFP/OTX EEPROM <Condtype> LINE_TX_BIAS_LOW_WARNING <Probcause> … |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.2.3.1.209.1.4 |
||||
|
Line Transceiver Bias High Warning
:Warning indicating that the XFP/OTX transmitter laser bias current is higher than the threshold value written in the XFP EEPROM <Condtype> LINE_TX_BIAS_HIGH_WARNING <Probcause> … |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.2.3.1.209.1.5 |
||||
|
Line Transceiver Temp Low Warning
:Warning indicating that the XFP/OTX temperature is lower than the threshold value written in the XFP/OTX EEPROM <Condtype> LINE_TEMP_LOW_WARNING <Probcause> temperatureUnacceptabl… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.2.3.1.209.1.8 |
||||
|
Line Transceiver Temp High Warning
:Warning indicating that the XFP/OTX temperature is higher than the threshold value written in the XFP EEPROM <Condtype> LINE_TEMP_HIGH_WARNING <Probcause> temperatureUnacceptable… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.2.3.1.209.1.9 |
||||
|
Line Optical Rx Power Low Warning
:Warning indicating that the XFP received optical power is lower than the threshold value written in the XFP EEPROM <Condtype> LINE_RX_POWER_LOW_WARNING <Probcause> receiveFailure… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.2.3.1.209.1.16 |
||||
|
Line Optical Rx Power High Warning
:Warning indicating that the XFP received optical power is higher than the threshold value written in the XFP EEPROM <Condtype> LINE_RX_POWER_HIGH_WARNING <Probcause> receiveFailu… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.2.3.1.209.1.17 |
.1.3.6.1.4.1.20044.50.2.3.1.225
·
1 row entry
·
5 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1002AlmlineOtx1TlhWarningsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-PMC1002-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-PMC1002-MIB::pmc1002AlmlineOtx1TlhWarningsTable'
List of pmc1002AlmlineOtx1TlhWarnings Article
Row definition for the pmc1002AlmlineOtx1TlhWarnings
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmc1002AlmlineOtx1TlhWarnings
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.50.2.3.1.225.1.1 |
||||
|
Line Modulator Aging High Warning
:Warning indicating the Line OTX TLH modulator aging is higher than the threshold written in the EEPROM <Condtype> LINE_MODULATOR_AGING_HIGH_WARNING <Probcause> transmitterFailure … |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.2.3.1.225.1.6 |
||||
|
Line OTX TLH Aging High Warning
:Warning indicating the Line OTX TLH aging is higher than the threshold written in the EEPROM <Condtype> LINE_AGING_HIGH_WARNING <Probcause> transmitterFailure (56) <Alarmtype> equi… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.2.3.1.225.1.7 |
||||
|
Line Freq. Deviation High Warning
:Warning indicating the Line OTX TLH frequency deviation is higher than the threshold written in the EEPROM <Condtype> LINE_FREQ_DEV_HIGH_WARNING <Probcause> transmitterFailure (5… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.2.3.1.225.1.13 |
||||
|
Line Laser Temp. High Warning
:Warning indicating the Line OTX TLH laser temperature is higher than the threshold written in the EEPROM <Condtype> LINE_LASER_TEMP_HIGH_WARNING <Probcause> temperatureUnacceptable (… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.2.3.1.225.1.15 |
pmc1002AlmdfrmBerTable
table.1.3.6.1.4.1.20044.50.2.3.2.129
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1002AlmdfrmBerTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-PMC1002-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-PMC1002-MIB::pmc1002AlmdfrmBerTable'
List of pmc1002AlmdfrmBer Article
Row definition for the pmc1002AlmdfrmBer
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmc1002AlmdfrmBer
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.50.2.3.2.129.1.1 |
||||
|
Custom Line Signal Degrade :This
OID indicates that the line input signal is DEGRADE. The assertion hysteresis can customized by the host <Condtype> LINE_SIGNAL_DEGRADE <Probcause> degradedSignal (13) <Alarmtype> … |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.2.3.2.129.1.2 |
||||
|
Custom Line Signal Fail :This
OID indicates that the line input signal is FAIL. The assertion hysteresis can be customized by the host <Condtype> LINE_SIGNAL_FAIL <Probcause> receiveFailure (41) <Alarmtype> integri… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.2.3.2.129.1.3 |
||||
|
Fixed Line Signal Degrade :This
OID indicates that the line input signal is DEGRADE. The assetion hysteresis is fixed to 10-8 (assertion) and 10-9 (de-assertion) <Condtype> LINE_DEGRADE <Probcause> degradedSignal … |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.2.3.2.129.1.6 |
.1.3.6.1.4.1.20044.50.2.3.2.208
·
1 row entry
·
9 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1002AlmlineXfp1AlarmTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-PMC1002-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-PMC1002-MIB::pmc1002AlmlineXfp1AlarmTable'
List of pmc1002AlmlineXfp1Alarm Article
Row definition for the pmc1002AlmlineXfp1Alarm
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmc1002AlmlineXfp1Alarm
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.50.2.3.2.208.1.1 |
||||
|
Line Optical Tx Power Low Alarm
:Alarm indicating that the XFP/OTX transmitter transmitter output power is lower than the threshold value written in the XFP/OTX EEPROM <Condtype> LINE_TX_POWER_LOW_ALARM <Probcause… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.2.3.2.208.1.2 |
||||
|
Line Optical Tx Power High Alarm
:Alarm indicating that the XFP/OTX transmitter transmitter output power is higher than the threshold value written in the XFP EEPROM <Condtype> LINE_TX_POWER_HIGH_ALARM <Probcause>… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.2.3.2.208.1.3 |
||||
|
Line Transceiver Bias Low Alarm
:Alarm indicating that the XFP/OTX transmitter laser bias current is lower than the threshold value written in the XFP/OTX EEPROM <Condtype> LINE_TX_BIAS_LOW_ALARM <Probcause> trans… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.2.3.2.208.1.4 |
||||
|
Line Transceiver Bias High Alarm
:Alarm indicating that the XFP/OTX transmitter laser bias current is higher than the threshold value written in the XFP EEPROM <Condtype> LINE_TX_BIAS_HIGH_ALARM <Probcause> transm… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.2.3.2.208.1.5 |
||||
|
Line Transceiver Temp Low Alarm
:Alarm indicating that the XFP/OTX temperature is lower than the threshold value written in the XFP/OTX EEPROM <Condtype> LINE_TEMP_LOW_ALARM <Probcause> temperatureUnacceptable (51… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.2.3.2.208.1.8 |
||||
|
Line Transceiver Temp High Alarm
:Alarm indicating that the XFP/OTX temperature is higher than the threshold value written in the XFP EEPROM <Condtype> LINE_TEMP_HIGH_ALARM <Probcause> temperatureUnacceptable (51)… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.2.3.2.208.1.9 |
||||
|
Line Optical Rx Power Low Alarm
:Alarm indicating that the XFP received optical power is lower than the threshold value written in the XFP EEPROM <Condtype> LINE_RX_POWER_LOW_ALARM <Probcause> receiveFailure (41) … |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.2.3.2.208.1.16 |
||||
|
Line Optical Rx Power High Alarm
:Alarm indicating that the XFP received optical power is higher than the threshold value written in the XFP EEPROM <Condtype> LINE_RX_POWER_HIGH_ALARM <Probcause> receiveFailure (41… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.2.3.2.208.1.17 |
.1.3.6.1.4.1.20044.50.2.3.2.212
·
1 row entry
·
17 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1002AlmlineXfp1SupplyAlarmTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-PMC1002-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-PMC1002-MIB::pmc1002AlmlineXfp1SupplyAlarmTable'
List of pmc1002AlmlineXfp1SupplyAlarm Article
Row definition for the pmc1002AlmlineXfp1SupplyAlarm
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmc1002AlmlineXfp1SupplyAlarm
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.50.2.3.2.212.1.1 |
||||
|
VEE5 Power Supply Low Alarm :Alarm
indicating the XFP/OTX VEE5 power supply is lower than the threshold written in the EEPROM <Condtype> LINE_VEE5_LOW_ALARM <Probcause> powerProblem (36) <Alarmtype> equipmentAlarm … |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.2.3.2.212.1.2 |
||||
|
VEE5 Power Supply High Alarm :Alarm
indicating the XFP/OTX VEE5 power supply is higher than the threshold written in the EEPROM <Condtype> LINE_VEE5_HIGH_ALARM <Probcause> powerProblem (36) <Alarmtype> equipmentAla… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.2.3.2.212.1.3 |
||||
|
VCC2 Power Supply Low Alarm :Alarm
indicating the XFP/OTX VCC2 power supply is lower than the threshold written in the EEPROM <Condtype> LINE_VCC2_LOW_ALARM <Probcause> powerProblem (36) <Alarmtype> equipmentAlarm … |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.2.3.2.212.1.4 |
||||
|
VCC2 Power Supply High Alarm :Alarm
indicating the XFP/OTX VCC2 power supply is higher than the threshold written in the EEPROM <Condtype> LINE_VCC2_HIGH_ALARM <Probcause> powerProblem (36) <Alarmtype> equipmentAla… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.2.3.2.212.1.5 |
||||
|
VCC3 Power Supply Low Alarm :Alarm
indicating the XFP/OTX VCC3 power supply is lower than the threshold written in the EEPROM <Condtype> LINE_VCC3_LOW_ALARM <Probcause> powerProblem (36) <Alarmtype> equipmentAlarm … |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.2.3.2.212.1.6 |
||||
|
VCC3 Power Supply High Alarm :Alarm
indicating the XFP/OTX VCC3 power supply is higher than the threshold written in the EEPROM <Condtype> LINE_VCC3_HIGH_ALARM <Probcause> powerProblem (36) <Alarmtype> equipmentAla… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.2.3.2.212.1.7 |
||||
|
VCC5 Power Supply Low Alarm :Alarm
indicating the XFP/OTX VCC5 power supply is lower than the threshold written in the EEPROM <Condtype> LINE_VCC5_LOW_ALARM <Probcause> powerProblem (36) <Alarmtype> equipmentAlarm … |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.2.3.2.212.1.8 |
||||
|
VCC5 Power Supply High Alarm :Alarm
indicating the XFP/OTX VCC5 power supply is higher than the threshold written in the EEPROM <Condtype> LINE_VCC5_HIGH_ALARM <Probcause> powerProblem (36) <Alarmtype> equipmentAla… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.2.3.2.212.1.9 |
||||
|
VEE5 Power Supply Low Warning
:Warning indicating the XFP/OTX VEE5 power supply is lower than the threshold written in the EEPROM <Condtype> LINE_VEE5_LOW_LINE_WARNING <Probcause> powerProblem (36) <Alarmtype> equ… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.2.3.2.212.1.10 |
||||
|
VEE5 Power Supply High Warning
:Warning indicating the XFP/OTX VEE5 power supply is higher than the threshold written in the EEPROM <Condtype> LINE_VEE5_HIGH_WARNING <Probcause> powerProblem (36) <Alarmtype> equip… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.2.3.2.212.1.11 |
||||
|
VCC2 Power Supply Low Warning
:Warning indicating the XFP/OTX VCC2 power supply is lower than the threshold written in the EEPROM <Condtype> LINE_VCC2_LOW_WARNING <Probcause> powerProblem (36) <Alarmtype> equipmen… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.2.3.2.212.1.12 |
||||
|
VCC2 Power Supply High Warning
:Warning indicating the XFP/OTX VCC2 power supply is higher than the threshold written in the EEPROM <Condtype> LINE_VCC2_HIGH_WARNING <Probcause> powerProblem (36) <Alarmtype> equip… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.2.3.2.212.1.13 |
||||
|
VCC3 Power Supply Low Warning
:Warning indicating the XFP/OTX VCC3 power supply is lower than the threshold written in the EEPROM <Condtype> LINE_VCC3_LOW_WARNING <Probcause> powerProblem (36) <Alarmtype> equipmen… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.2.3.2.212.1.14 |
||||
|
VCC3 Power Supply High Warning
:Warning indicating the XFP/OTX VCC3 power supply is higher than the threshold written in the EEPROM <Condtype> LINE_VCC3_HIGH_WARNING <Probcause> powerProblem (36) <Alarmtype> equip… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.2.3.2.212.1.15 |
||||
|
VCC5 Power Supply Low Warning
:Warning indicating the XFP/OTX VCC5 power supply is lower than the threshold written in the EEPROM <Condtype> LINE_VCC5_LOW_WARNING <Probcause> powerProblem (36) <Alarmtype> equipmen… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.2.3.2.212.1.16 |
||||
|
VCC5 Power Supply High Warning
:Warning indicating the XFP/OTX VCC5 power supply is higher than the threshold written in the EEPROM <Condtype> LINE_VCC5_HIGH_WARNING <Probcause> powerProblem (36) <Alarmtype> equip… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.2.3.2.212.1.17 |
.1.3.6.1.4.1.20044.50.2.3.2.224
·
1 row entry
·
6 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1002AlmlineOtx1TlhAlarmsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-PMC1002-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-PMC1002-MIB::pmc1002AlmlineOtx1TlhAlarmsTable'
List of pmc1002AlmlineOtx1TlhAlarms Article
Row definition for the pmc1002AlmlineOtx1TlhAlarms
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmc1002AlmlineOtx1TlhAlarms
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.50.2.3.2.224.1.1 |
||||
|
Line Modulator Aging High Alarm
:Alarm indicating the Line OTX TLH modulator aging is higher than the threshold written in the EEPROM <Condtype> LINE_MODULATOR_AGING_HIGH_ALA <Probcause> transmitterFailure (56) <A… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.2.3.2.224.1.6 |
||||
|
Line OTX TLH Aging High Alarm
:Alarm indicating the Line OTX TLH aging is higher than the threshold written in the EEPROM <Condtype> LINE_AGING_HIGH_ALA <Probcause> transmitterFailure (56) <Alarmtype> equipmentAla… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.2.3.2.224.1.7 |
||||
|
CDR Not Ready :This OID indicates
the Clock Data Recovery unit is not yet initialized <Help> This alarm indicates the Clock Data Recovery unit is not yet initialized. <Condtype> LINE_CDR_NOT_READY <Probcause> re… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.2.3.2.224.1.10 |
||||
|
Line Freq. Deviation High Alarm
:Alarm indicating the Line OTX TLH frequency deviation is higher than the threshold written in the EEPROM <Condtype> LINE_FREQ_DEV_HIGH_ALA <Probcause> transmitterFailure (56) <Alar… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.2.3.2.224.1.13 |
||||
|
Line Laser Temp. High Alarm :Alarm
indicating the Line OTX TLH laser temperature is higher than the threshold written in the EEPROM <Condtype> LINE_LASER_TEMP_HIGH_ALA <Probcause> temperatureUnacceptable (51) <Ala… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.2.3.2.224.1.15 |
.1.3.6.1.4.1.20044.50.2.3.3.7
·
1 row entry
·
11 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1002AlmsynthAlmLineTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-PMC1002-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-PMC1002-MIB::pmc1002AlmsynthAlmLineTable'
List of pmc1002AlmsynthAlmLine Article
Row definition for the pmc1002AlmsynthAlmLine
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmc1002AlmsynthAlmLine
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.50.2.3.3.7.1.1 |
||||
|
Line Optical Module Absent :This
OID indicates that the line optical interface (XFP or OTX) is not plugged in. <Help> This alarm indicates if the line transceiver is present. <Condtype> LINE_XFP_ABSENT <Probcause… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.2.3.3.7.1.2 |
||||
|
Line Optical Module Ready :This
OID indicates that the line optical interface (XFP or OTX) is not operational. <Help> This status indicates if the line transceiver has been correctly initialized <Condtype> LINE_… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.2.3.3.7.1.3 |
||||
|
Line Port HW Failure :This OID
indicates a failure on line port, most probably caused by a HW issue <Condtype> LINE_HW_FAIL <Probcause> equipmentMalfunction (16) <Alarmtype> synthesisAlarm (12) <Polarity> (2) |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.2.3.3.7.1.5 |
||||
|
Line Optical Laser Shutdown :This
OID indicates the line optical output power is on <Help> This status indicates if the line transceiver laser is ON or OFF <Condtype> LINE_XFP_TX_OFF <Probcause> other (1) <Alarmt… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.2.3.3.7.1.6 |
||||
|
Line Port In Service :This OID
indicates that the Line port is In Service (1) of Out or Service (2) <Help> This status indicates if the line port is in service <Condtype> LINE_LOCAL_OOS <Probcause> informational… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.2.3.3.7.1.7 |
||||
|
MS-RDI/L-RDI Inserted On Line
:This OID indicates an upstream RDI has been inserted in the outgoing 10 Gb/s signal. <Help> This status indicates if a MS-RDI/L-RDI is currently inserted on the line interface. <C… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.2.3.3.7.1.9 |
||||
|
Warning On Line Optical Module
DDM :This OID indicates a warning is present coming out of Line optical interface DDM <Help> This alarm indicates if a DDM Warning has been detected on the line transceiver <Condty… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.2.3.3.7.1.10 |
||||
|
Alarm On Line Optical Module DDM
:This OID indicates an alarm is present coming out of Line optical interface DDM <Help> This alarm indicates if a DDM Alarm has been detected on the line transceiver <Condtype> L… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.2.3.3.7.1.11 |
||||
|
Line Port Failure :This OID indicates
a failure on the line port <Condtype> LINE_FAIL <Probcause> equipmentMalfunction (16) <Alarmtype> synthesisAlarm (12) <Polarity> (2) |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.2.3.3.7.1.13 |
||||
|
Line Active :This bit indicates
the line #n is active on receive side <Condtype> LINE_ACTIVE <Probcause> informationalStatus(1000) <Alarmtype> other (1) <Polarity> (2) |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.2.3.3.7.1.17 |
pmc1002AlmdfrmAlmTable
table.1.3.6.1.4.1.20044.50.2.3.3.128
·
1 row entry
·
6 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1002AlmdfrmAlmTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-PMC1002-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-PMC1002-MIB::pmc1002AlmdfrmAlmTable'
List of pmc1002AlmdfrmAlm Article
Row definition for the pmc1002AlmdfrmAlm
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmc1002AlmdfrmAlm
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.50.2.3.3.128.1.1 |
||||
|
MS-AIS/L-AIS Detected On Line
Input :This OID indicates that an MS-AIS has been detected on line input signal <Help> This alarm indicates if there is a MS-AIS/L-AIS is detected on the line input signal <Condtype… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.2.3.3.128.1.2 |
||||
|
MS-RDI/L-RDI Detected On Line
Input :This OID indicates that an MS-RDI has been detected on line input signal <Help> This alarm indicates if there is a MS-RDI/L-RDI is detected on the line input signal <Condtype… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.2.3.3.128.1.3 |
||||
|
SONET/SDH Line Out Of Frame :This
OID indicates that an Out Of Frame has been detected on line input signal <Help> This alarm indicates if a Loss Of Frame is detected on the line input signal <Condtype> LINE_DW_… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.2.3.3.128.1.4 |
||||
|
SONET/SDH Line Loss Of Frame :This
OID indicates that a Loss Of Frame has been detected on line input signal <Help> This alarm indicates if there is a Loss of Frame is detected on the line input signal <Condtype… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.2.3.3.128.1.5 |
||||
|
FEC Decoding Fail :This OID indicates
that the FEC decoder is in an overcapacity mode and not able to correct errors <Help> This alarm indicates if the FEC decoder is in an over capacity mode <Condtype> LINE_FEC… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.2.3.3.128.1.6 |
.1.3.6.1.4.1.20044.50.2.3.3.133
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1002AlmlineSyncAlarmsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-PMC1002-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-PMC1002-MIB::pmc1002AlmlineSyncAlarmsTable'
List of pmc1002AlmlineSyncAlarms Article
Row definition for the pmc1002AlmlineSyncAlarms
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmc1002AlmlineSyncAlarms
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.50.2.3.3.133.1.1 |
||||
|
Downstream Clock Lock Error :This
OID indicates that the deserializer input 10 Gb/s clock recovery is not locked. <Condtype> LINE_DW_LOCKERR <Probcause> receiveFailure (41) <Alarmtype> equipmentAlarm (5) <Polarity… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.2.3.3.133.1.13 |
||||
|
Upstream Clock Lock Error :This
OID indicates that the serializer output 10 Gb/s clock multiplier unit is not locked. <Condtype> LINE_UP_LOCKERR <Probcause> receiveFailure (41) <Alarmtype> equipmentAlarm (5) <Pola… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.2.3.3.133.1.14 |
||||
|
Line Input Loss Of Signal :This
OID indicates a loss of signal on the 10 Gb/s input. <Help> This alarm indicates if an optical signal is detected on the line transceiver input <Condtype> LINE_DW_LOS <Probcause> … |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.2.3.3.133.1.17 |
.1.3.6.1.4.1.20044.50.2.3.3.211
·
1 row entry
·
11 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1002AlmlineXfp1AlarmsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-PMC1002-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-PMC1002-MIB::pmc1002AlmlineXfp1AlarmsTable'
List of pmc1002AlmlineXfp1Alarms Article
Row definition for the pmc1002AlmlineXfp1Alarms
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmc1002AlmlineXfp1Alarms
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.50.2.3.3.211.1.1 |
||||
|
Line Optical Module Not Ready
:This OID indicates that the module is unable to determine correct data. <Help> This alarm indicates if the line transceiver is ready <Condtype> LINE_MOD_NR <Probcause> receiveFailu… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.2.3.3.211.1.3 |
||||
|
Line Optical Rx CDR Unlocked :This
OID indicates that a loss of lock on the receiving side CDR has been detected <Help> This alarm indicates if the Rx CDR is locked in the line transceiver <Condtype> LINE_RX_CDR_… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.2.3.3.211.1.4 |
||||
|
Line Optical Rx Not Ready :This
OID indicates that a condition has arisen leading to invalid data on the receiving side. <Help> This alarm indicates if the Rx part of the line transceiver is ready <Condtype> LIN… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.2.3.3.211.1.6 |
||||
|
Line Optical Tx CDR Unlocked :This
OID indicates a loss of lock on the transmitting side CDR has been detected. <Help> This alarm indicates if the Tx CDR is locked in the line transceiver <Condtype> LINE_TX_CDR_N… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.2.3.3.211.1.7 |
||||
|
Line Optical Tx Failure :This
OID indicates a fault condition on the laser detected by the safety syste <Help> This alarm indicates if the laser of the line transceiver is in fail condition <Condtype> LINE_TX_FA… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.2.3.3.211.1.8 |
||||
|
Line Optical Tx Not Ready :This
OID indicates a condition has arisen leading to invalid data on the transmitting side <Help> This alarm indicates if the Tx part of the line transceiver is ready <Condtype> LINE_T… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.2.3.3.211.1.9 |
||||
|
DWDM Channel Not Acquired :This
OID indicates the transceiver didn't tune the DWDM Channel succesfully. <Help> This status indicates the transceiver has not tuned the DWDM Channel succesfully. <Condtype> LINE_CH… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.2.3.3.211.1.11 |
||||
|
Line Optical Tx Wavelength Unlock
:This OID indicates that the wavelength error is exceeding the manufacturer tolerance <Help> This alarm indicates if the wavelenght of the line transceiver is locked <Condtype> L… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.2.3.3.211.1.15 |
||||
|
Line Optical Tx Temp Regul. Failed
:This OID indicates a failure on the TEC module <Help> This alarm indicates if the TEC of the line transceiver is in fail condition <Condtype> LINE_TEC_FAULT <Probcause> transm… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.2.3.3.211.1.16 |
||||
|
Line Rx Photodiode Power Failed
:This OID indicates a failure on the APD power supply <Help> This alarm indicates if the APD power supply is in fail condition <Condtype> LINE_APD_SUPPLY_FAULT <Probcause> receive… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.2.3.3.211.1.17 |
.1.3.6.1.4.1.20044.50.3.2.16
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1002MesrclientModTempMeasTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-PMC1002-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-PMC1002-MIB::pmc1002MesrclientModTempMeasTable'
List of pmc1002MesrclientModTempMeas Article
Row definition for the pmc1002MesrclientModTempMeas
table
table
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the pmc1002MesrclientModTempMeas
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.50.3.2.16.1.1 |
|
Client SFP+ Temperature :This
OID gives the temperature value of the XFP plugged in port, read from the DDM (Digital Diagnostic Monitoring) (Temperature = AV/256) (Unit = C) <Help> This measure gives the temper… |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.20044.50.3.2.16.1.2 |
.1.3.6.1.4.1.20044.50.3.2.32
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1002MesrclientBiasCurrentMeasTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-PMC1002-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-PMC1002-MIB::pmc1002MesrclientBiasCurrentMeasTable'
List of pmc1002MesrclientBiasCurrentMeas Article
Row definition for the pmc1002MesrclientBiasCurrentMeas
table
table
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the pmc1002MesrclientBiasCurrentMeas
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.50.3.2.32.1.1 |
|
Client SFP+ Laser Bias :This OID
gives the bias value of the XFP plugged into port, read from the DDM (Digital Diagnostic Monitoring) (Bias = AV/500) (Unit = mA) <Help> This measure gives the bias of the client… |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.20044.50.3.2.32.1.2 |
.1.3.6.1.4.1.20044.50.3.2.40
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1002MesrclientTxPowerMeasTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-PMC1002-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-PMC1002-MIB::pmc1002MesrclientTxPowerMeasTable'
List of pmc1002MesrclientTxPowerMeas Article
Row definition for the pmc1002MesrclientTxPowerMeas
table
table
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the pmc1002MesrclientTxPowerMeas
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.50.3.2.40.1.1 |
|
Client SFP+ Tx Power :This OID
gives the transmit power value of the XFP plugged into port, read from the DDM (Digital Diagnostic Monitoring) (Power = 10*log(AV)-40) (Unit = dBm) <Help> This measure gives the Tx… |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.20044.50.3.2.40.1.2 |
.1.3.6.1.4.1.20044.50.3.2.48
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1002MesrclientRxPowerMeasTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-PMC1002-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-PMC1002-MIB::pmc1002MesrclientRxPowerMeasTable'
List of pmc1002MesrclientRxPowerMeas Article
Row definition for the pmc1002MesrclientRxPowerMeas
table
table
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the pmc1002MesrclientRxPowerMeas
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.50.3.2.48.1.1 |
|
Client SFP+ Rx Power :This OID
gives the receive power value of the XFP plugged into port, read in the DDM (Digital Diagnostic Monitoring) (Power = 10*log(AV)-40) (Unit = dBm) <Help> This measure gives the Rx op… |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.20044.50.3.2.48.1.2 |
.1.3.6.1.4.1.20044.50.3.3.208
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1002Mesrline1ModTempMeasTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-PMC1002-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-PMC1002-MIB::pmc1002Mesrline1ModTempMeasTable'
List of pmc1002Mesrline1ModTempMeas Article
Row definition for the pmc1002Mesrline1ModTempMeas
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the pmc1002Mesrline1ModTempMeas
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.50.3.3.208.1.1 |
|
Line Optical Module Temperature
:This OID gives the temperature of the XFP or OTX plugged in line#n, read from the DDM (Digital Diagnostic Monitoring) (Temperature = AV/256) (Unit = C) <Help> This measure gives … |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.20044.50.3.3.208.1.2 |
.1.3.6.1.4.1.20044.50.3.3.209
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1002Mesrline1ReservedTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-PMC1002-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-PMC1002-MIB::pmc1002Mesrline1ReservedTable'
List of pmc1002Mesrline1Reserved Article
Row definition for the pmc1002Mesrline1Reserved
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
pmc1002Mesrline1ReservedIndexdeprecated
Index definition for the pmc1002Mesrline1Reserved
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.50.3.3.209.1.1 |
|
pmc1002Mesrline1ReservedPortndeprecated
Not Used :Reserved
|
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.20044.50.3.3.209.1.2 |
.1.3.6.1.4.1.20044.50.3.3.210
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1002Mesrline1BiasCurrentMeasTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-PMC1002-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-PMC1002-MIB::pmc1002Mesrline1BiasCurrentMeasTable'
List of pmc1002Mesrline1BiasCurrentMeas Article
Row definition for the pmc1002Mesrline1BiasCurrentMeas
table
table
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the pmc1002Mesrline1BiasCurrentMeas
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.50.3.3.210.1.1 |
|
XFP Or OTX Laser Bias :This OID
gives the bias value of the XFP or OTX plugged in line #n, read from the DDM (Digital Diagnostic Monitoring) (Bias = AV/500) (Unit = mA) <Help> This measure gives the bias of the … |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.20044.50.3.3.210.1.2 |
.1.3.6.1.4.1.20044.50.3.3.211
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1002Mesrline1TxPowerMeasTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-PMC1002-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-PMC1002-MIB::pmc1002Mesrline1TxPowerMeasTable'
List of pmc1002Mesrline1TxPowerMeas Article
Row definition for the pmc1002Mesrline1TxPowerMeas
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the pmc1002Mesrline1TxPowerMeas
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.50.3.3.211.1.1 |
|
Line Optical Module Tx Power :This
OID gives the transmit power value of the XFP or OTX plugged in line #n, read from the DDM (Digital Diagnostic Monitoring) (Power = 10*log(AV)-40) (Unit = dBm) <Help> This me… |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.20044.50.3.3.211.1.2 |
.1.3.6.1.4.1.20044.50.3.3.212
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1002Mesrline1RxPowerMeasTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-PMC1002-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-PMC1002-MIB::pmc1002Mesrline1RxPowerMeasTable'
List of pmc1002Mesrline1RxPowerMeas Article
Row definition for the pmc1002Mesrline1RxPowerMeas
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the pmc1002Mesrline1RxPowerMeas
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.50.3.3.212.1.1 |
|
Line Optical Module Rx Power :This
OID gives the receive power value of the XFP or OTX plugged in line #n, read from the DDM (Digital Diagnostic Monitoring) (Power = 10*log(AV)-40) (Unit = dBm) <Help> This measu… |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.20044.50.3.3.212.1.2 |
.1.3.6.1.4.1.20044.50.3.3.213
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1002Mesrline1Aux1MeasTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-PMC1002-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-PMC1002-MIB::pmc1002Mesrline1Aux1MeasTable'
List of pmc1002Mesrline1Aux1Meas Article
Row definition for the pmc1002Mesrline1Aux1Meas
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
pmc1002Mesrline1Aux1MeasIndexdeprecated
Index definition for the pmc1002Mesrline1Aux1Meas
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.50.3.3.213.1.1 |
|
pmc1002Mesrline1Aux1MeasPortndeprecated
Not Used :This OID gives the receive
power value read in the DDM (Digital Diagnostic Monitoring) of the XFP or OTX plugged in line #n (Unit = ?) |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.20044.50.3.3.213.1.2 |
.1.3.6.1.4.1.20044.50.3.3.214
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1002Mesrline1Aux2MeasTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-PMC1002-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-PMC1002-MIB::pmc1002Mesrline1Aux2MeasTable'
List of pmc1002Mesrline1Aux2Meas Article
Row definition for the pmc1002Mesrline1Aux2Meas
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
pmc1002Mesrline1Aux2MeasIndexdeprecated
Index definition for the pmc1002Mesrline1Aux2Meas
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.50.3.3.214.1.1 |
|
pmc1002Mesrline1Aux2MeasPortndeprecated
Not Used :This OID gives the receive
power value read in the DDM (Digital Diagnostic Monitoring) of the XFP or OTX plugged in line #n (Unit = ?) |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.20044.50.3.3.214.1.2 |
.1.3.6.1.4.1.20044.50.3.3.224
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1002Mesrline1AgingTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-PMC1002-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-PMC1002-MIB::pmc1002Mesrline1AgingTable'
List of pmc1002Mesrline1Aging Article
Row definition for the pmc1002Mesrline1Aging
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the pmc1002Mesrline1Aging
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.50.3.3.224.1.1 |
|
Line OTX TLH Aging :This OID gives
the aging of the Line OTX TLH, read from the DDM (Digital Diagnostic Monitoring) (Aging = AV) (Unit = %) <Help> This measure gives the aging of the Line OTX TLH |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.20044.50.3.3.224.1.2 |
.1.3.6.1.4.1.20044.50.3.3.225
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1002Mesrline1LaserTemperatureTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-PMC1002-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-PMC1002-MIB::pmc1002Mesrline1LaserTemperatureTable'
List of pmc1002Mesrline1LaserTemperature Article
Row definition for the pmc1002Mesrline1LaserTemperature
table
table
| Column | Syntax | OID |
|---|---|---|
|
pmc1002Mesrline1LaserTemperatureIndexdeprecated
Index definition for the pmc1002Mesrline1LaserTemperature
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.50.3.3.225.1.1 |
|
pmc1002Mesrline1LaserTemperaturePortndeprecated
Line OTX TLH Laser Temperature
:This OID gives the laser temperature of the Line OTX TLH, read from the DDM (Digital Diagnostic Monitoring) (Temperature = AV/256) (Unit = C) <Help> This measure gives the laser t… |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.20044.50.3.3.225.1.2 |
.1.3.6.1.4.1.20044.50.3.3.226
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1002Mesrline1FreqDeviationTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-PMC1002-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-PMC1002-MIB::pmc1002Mesrline1FreqDeviationTable'
List of pmc1002Mesrline1FreqDeviation Article
Row definition for the pmc1002Mesrline1FreqDeviation
table
table
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the pmc1002Mesrline1FreqDeviation
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.50.3.3.226.1.1 |
|
Line OTX TLH Frequency Deviation
:This OID gives the frequency deviation of the Line OTX TLH, read from the DDM (Digital Diagnostic Monitoring) (Deviation = (AV-32768)*100) (Unit = MHz) <Help> This measure giv… |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.20044.50.3.3.226.1.2 |
.1.3.6.1.4.1.20044.50.3.3.227
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1002Mesrline1LaserWvlengthTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-PMC1002-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-PMC1002-MIB::pmc1002Mesrline1LaserWvlengthTable'
List of pmc1002Mesrline1LaserWvlength Article
Row definition for the pmc1002Mesrline1LaserWvlength
table
table
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the pmc1002Mesrline1LaserWvlength
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.50.3.3.227.1.1 |
|
Line Optical Module Wavelength
:This OID gives the laser wavelength of the Line OTX TLH, read from the DDM (Digital Diagnostic Monitoring) (Wavelength=299792458/((193,100+(AV-32768 )*12,5)*10 3)) (Unit = nm) <Hel… |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.20044.50.3.3.227.1.2 |
.1.3.6.1.4.1.20044.50.4.2.32
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1002CntclientUpErrCntTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-PMC1002-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-PMC1002-MIB::pmc1002CntclientUpErrCntTable'
List of pmc1002CntclientUpErrCnt Article
Row definition for the pmc1002CntclientUpErrCnt
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmc1002CntclientUpErrCnt
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.50.4.2.32.1.1 |
||||
|
Client Input Errors :This counter
is increased each time a FCS error is detected in 10GbE mode or a B1 error is detected in OC-192/STM-64 mode on the client input stream <Help> This counter gives the number of F… |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.50.4.2.32.1.2 |
||||
|
Client Counter Error :This OID
when set indicates the FCS error counter value is invalid on input Port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.4.2.32.1.3 |
||||
|
Client Counter Overload :This
OID when set indicates a FCS error counter overload on input Port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.4.2.32.1.4 |
.1.3.6.1.4.1.20044.50.4.2.40
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1002CntclientUpTimCntTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-PMC1002-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-PMC1002-MIB::pmc1002CntclientUpTimCntTable'
List of pmc1002CntclientUpTimCnt Article
Row definition for the pmc1002CntclientUpTimCnt
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmc1002CntclientUpTimCnt
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.50.4.2.40.1.1 |
||||
|
Client Upstream Timer Counter
:This is the timing counter dedicated to the upstream access counters. It is incremented every 125 us. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.50.4.2.40.1.2 |
||||
|
Client Counter Error :This OID
when set indicates the upstream timing counter value is invalid on Port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.4.2.40.1.3 |
||||
|
Client Counter Overload :This
OID when set indicates a upstream timing counter overload on Port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.4.2.40.1.4 |
.1.3.6.1.4.1.20044.50.4.2.64
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1002CntclientDwErrCntTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-PMC1002-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-PMC1002-MIB::pmc1002CntclientDwErrCntTable'
List of pmc1002CntclientDwErrCnt Article
Row definition for the pmc1002CntclientDwErrCnt
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmc1002CntclientDwErrCnt
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.50.4.2.64.1.1 |
||||
|
Client Output Errors :This counter
is increased each time a B1/FCS error is detected on the client output stream <Help> This counter gives the number of FCS errors or B1 errors on the client output port |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.50.4.2.64.1.2 |
||||
|
Client Counter Error :This OID
when set indicates the FCS error counter value is invalid on output Port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.4.2.64.1.3 |
||||
|
Client Counter Overload :This
OID when set indicates a FCS error counter overload on output Port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.4.2.64.1.4 |
.1.3.6.1.4.1.20044.50.4.2.72
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1002CntclientDwTimCntTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-PMC1002-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-PMC1002-MIB::pmc1002CntclientDwTimCntTable'
List of pmc1002CntclientDwTimCnt Article
Row definition for the pmc1002CntclientDwTimCnt
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmc1002CntclientDwTimCnt
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.50.4.2.72.1.1 |
||||
|
Client Downstream Timer Counter
:This is the timing counter dedicated to the downstream access counters. It is incremented every 125 us. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.50.4.2.72.1.2 |
||||
|
Client Counter Error :This OID
when set indicates the downstream timer counter value is invalid on Port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.4.2.72.1.3 |
||||
|
Client Counter Overload :This
OID when set indicates a downstream timer counter overload on Port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.4.2.72.1.4 |
.1.3.6.1.4.1.20044.50.4.3.152
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1002CntlineDfrmErrCntTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-PMC1002-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-PMC1002-MIB::pmc1002CntlineDfrmErrCntTable'
List of pmc1002CntlineDfrmErrCnt Article
Row definition for the pmc1002CntlineDfrmErrCnt
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmc1002CntlineDfrmErrCnt
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.50.4.3.152.1.1 |
||||
|
Line Input B1 Errors :This counter
is incremented each time a B1 error is detected on the Deframer input stream. <Help> This counter gives the number of B1 errors on the line port |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.50.4.3.152.1.2 |
||||
|
Line Counter Error :This OID when
set indicates the B1 error counter value is invalid on Port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.4.3.152.1.3 |
||||
|
Line Counter Overload :This OID
when set indicates a B1 error counter overload on Port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.4.3.152.1.4 |
.1.3.6.1.4.1.20044.50.4.3.153
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1002CntlineDfrmTimCntTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-PMC1002-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-PMC1002-MIB::pmc1002CntlineDfrmTimCntTable'
List of pmc1002CntlineDfrmTimCnt Article
Row definition for the pmc1002CntlineDfrmTimCnt
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmc1002CntlineDfrmTimCnt
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.50.4.3.153.1.1 |
||||
|
Line Timer Counter :This is the
timing counter dedicated to the downstream deframer counters. It is incremented every 125 us. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.50.4.3.153.1.2 |
||||
|
Line Counter Error :This OID when
set indicates the deframer timer counter value is invalid on Port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.4.3.153.1.3 |
||||
|
Line Counter Overload :This OID
when set indicates a deframer timer counter overload on Port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.4.3.153.1.4 |
.1.3.6.1.4.1.20044.50.4.3.154
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1002CntlineDfrmPrimErrCntTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-PMC1002-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-PMC1002-MIB::pmc1002CntlineDfrmPrimErrCntTable'
List of pmc1002CntlineDfrmPrimErrCnt Article
Row definition for the pmc1002CntlineDfrmPrimErrCnt
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmc1002CntlineDfrmPrimErrCnt
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.50.4.3.154.1.1 |
||||
|
Line Input FEC Corrected Errors
:This counter is incremented each time an error is corrected by the Forward Error Correction decoder <Help> This counter gives the number of errors corrected by the FEC on the lin… |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.50.4.3.154.1.2 |
||||
|
Line FEC Counter Error :This bit
when set indicates the FEC counter value is invalid on Port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.4.3.154.1.3 |
||||
|
Line FEC Counter Overload :This
bit when set indicates a FEC counter overload on Port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.4.3.154.1.4 |
.1.3.6.1.4.1.20044.50.6.2.16
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1002CtrlaccessLoopTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-PMC1002-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-PMC1002-MIB::pmc1002CtrlaccessLoopTable'
List of pmc1002CtrlaccessLoop Article
Row definition for the pmc1002CtrlaccessLoop
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmc1002CtrlaccessLoop
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.50.6.2.16.1.1 |
||||
|
Client Facility Loopback :This
OID operates a Client Facility Loopback, looping client input signal on the client output port. The loop is located on the client transceiver <Help> This maintenance parameter opera… |
EKINOPS-MIBEkiStater/w Type Values:
|
.1.3.6.1.4.1.20044.50.6.2.16.1.2 |
.1.3.6.1.4.1.20044.50.6.2.18
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1002CtrlportOosModeTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-PMC1002-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-PMC1002-MIB::pmc1002CtrlportOosModeTable'
List of pmc1002CtrlportOosMode Article
Row definition for the pmc1002CtrlportOosMode
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmc1002CtrlportOosMode
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.50.6.2.18.1.1 |
||||
|
Client Port Out Of Service :This
OID sets the client port Out Of Service <Help> This controls defines the service state of the client port |
EKINOPS-MIBEkiStater/w Type Values:
|
.1.3.6.1.4.1.20044.50.6.2.18.1.2 |
.1.3.6.1.4.1.20044.50.6.2.20
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1002CtrlsfpOffCtrlTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-PMC1002-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-PMC1002-MIB::pmc1002CtrlsfpOffCtrlTable'
List of pmc1002CtrlsfpOffCtrl Article
Row definition for the pmc1002CtrlsfpOffCtrl
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmc1002CtrlsfpOffCtrl
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.50.6.2.20.1.1 |
||||
|
Client SFP+ Optical Laser OFF
:This OID switches off the SFP. <Help> This control defines the laser state of the client transceiver |
EKINOPS-MIBEkiStater/w Type Values:
|
.1.3.6.1.4.1.20044.50.6.2.20.1.2 |
pmc1002CtrlcsfUpInsTable
table.1.3.6.1.4.1.20044.50.6.2.21
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1002CtrlcsfUpInsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-PMC1002-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-PMC1002-MIB::pmc1002CtrlcsfUpInsTable'
List of pmc1002CtrlcsfUpIns Article
Row definition for the pmc1002CtrlcsfUpIns
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmc1002CtrlcsfUpIns
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.50.6.2.21.1.1 |
||||
|
Client Signal Fail Insertion :This
OID, when set, inserts a client signal fail in the upstream client Port. <Help> This control inserts a Client Signal Fail for the client port |
EKINOPS-MIBEkiStater/w Type Values:
|
.1.3.6.1.4.1.20044.50.6.2.21.1.2 |
.1.3.6.1.4.1.20044.50.6.2.22
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1002CtrlcaisDwInsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-PMC1002-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-PMC1002-MIB::pmc1002CtrlcaisDwInsTable'
List of pmc1002CtrlcaisDwIns Article
Row definition for the pmc1002CtrlcaisDwIns
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmc1002CtrlcaisDwIns
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.50.6.2.22.1.1 |
||||
|
Client AIS Insertion :This OID,
when set, inserts a client AIS on the downstream client Port. <Help> This control inserts a Client AIS for the client port |
EKINOPS-MIBEkiStater/w Type Values:
|
.1.3.6.1.4.1.20044.50.6.2.22.1.2 |
.1.3.6.1.4.1.20044.50.6.2.26
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1002CtrlclientAccessTermLoopTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-PMC1002-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-PMC1002-MIB::pmc1002CtrlclientAccessTermLoopTable'
List of pmc1002CtrlclientAccessTermLoop Article
Row definition for the pmc1002CtrlclientAccessTermLoop
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmc1002CtrlclientAccessTermLoop
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.50.6.2.26.1.1 |
||||
|
Client Terminal Loopback :This
OID operates a Client Terminal Loopback, looping client input signal on the client output port. The loop is located on the line transceiver <Help> This maintenance parameter operate… |
EKINOPS-MIBEkiStater/w Type Values:
|
.1.3.6.1.4.1.20044.50.6.2.26.1.2 |
pmc1002CtrlprotocolTable
table.1.3.6.1.4.1.20044.50.6.2.52
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1002CtrlprotocolTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-PMC1002-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-PMC1002-MIB::pmc1002CtrlprotocolTable'
List of pmc1002Ctrlprotocol Article
Row definition for the pmc1002Ctrlprotocol
table
table
Indexes
| Column | Syntax | OID | ||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Index definition for the pmc1002Ctrlprotocol
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.50.6.2.52.1.1 |
||||||||||||||||||||||||||
|
Client Protocol: This OID sets
the protocol of the Client port. |
EKINOPS-MIBEkiProtocolr/w Type Values:
|
.1.3.6.1.4.1.20044.50.6.2.52.1.2 |
.1.3.6.1.4.1.20044.50.6.2.271
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1002CtrlclientResetAllCountTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-PMC1002-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-PMC1002-MIB::pmc1002CtrlclientResetAllCountTable'
List of pmc1002CtrlclientResetAllCount Article
Row definition for the pmc1002CtrlclientResetAllCount
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmc1002CtrlclientResetAllCount
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.50.6.2.271.1.1 |
||||
|
Client Counters Reset :This OID
resets every counter on the client port <Help> This control operates a reset on the statistics current ,previous and history client port counters |
EKINOPS-MIBEkiStater/w Type Values:
|
.1.3.6.1.4.1.20044.50.6.2.271.1.2 |
.1.3.6.1.4.1.20044.50.6.3.64
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1002CtrlcommAccessLoopTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-PMC1002-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-PMC1002-MIB::pmc1002CtrlcommAccessLoopTable'
List of pmc1002CtrlcommAccessLoop Article
Row definition for the pmc1002CtrlcommAccessLoop
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
pmc1002CtrlcommAccessLoopIndexdeprecated
Index definition for the pmc1002CtrlcommAccessLoop
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.50.6.3.64.1.1 |
||||
|
pmc1002CtrlcommAccessLoopPortndeprecated
PM Full Access Loop Mode :This
OID, when set, puts the module in common access loop back, looping the 10 Gb/s output signal on the 10 Gb/s input. |
EKINOPS-MIBEkiStater/w Type Values:
|
.1.3.6.1.4.1.20044.50.6.3.64.1.2 |
pmc1002CtrllineLoopTable
table.1.3.6.1.4.1.20044.50.6.3.66
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1002CtrllineLoopTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-PMC1002-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-PMC1002-MIB::pmc1002CtrllineLoopTable'
List of pmc1002CtrllineLoop Article
Row definition for the pmc1002CtrllineLoop
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmc1002CtrllineLoop
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.50.6.3.66.1.1 |
||||
|
Line Facility Loopback :This OID
operates a Line Facility Loopback, looping line input signal on the line output port. The loop is located on the line transceiver. If the Line signal carries DCC, the management ne… |
EKINOPS-MIBEkiStater/w Type Values:
|
.1.3.6.1.4.1.20044.50.6.3.66.1.2 |
pmc1002CtrlmsAisTable
table.1.3.6.1.4.1.20044.50.6.3.67
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1002CtrlmsAisTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-PMC1002-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-PMC1002-MIB::pmc1002CtrlmsAisTable'
List of pmc1002CtrlmsAis Article
Row definition for the pmc1002CtrlmsAis
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmc1002CtrlmsAis
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.50.6.3.67.1.1 |
||||
|
Insert MS-AIS/L-AIS On Line Output
:This OID, when set, inserts an MS-AIS/L-AIS in the outgoing STM-64/OC-192 signal. |
EKINOPS-MIBEkiStater/w Type Values:
|
.1.3.6.1.4.1.20044.50.6.3.67.1.2 |
.1.3.6.1.4.1.20044.50.6.3.69
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1002CtrlfecDisableTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-PMC1002-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-PMC1002-MIB::pmc1002CtrlfecDisableTable'
List of pmc1002CtrlfecDisable Article
Row definition for the pmc1002CtrlfecDisable
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmc1002CtrlfecDisable
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.50.6.3.69.1.1 |
||||
|
FEC Disable :This OID disable
the Forward Error Correction decoder on the line receive side <Help> This control disables the Forward Error Correction on the line input signal. |
EKINOPS-MIBEkiStater/w Type Values:
|
.1.3.6.1.4.1.20044.50.6.3.69.1.2 |
.1.3.6.1.4.1.20044.50.6.3.74
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1002CtrllineOosModeTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-PMC1002-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-PMC1002-MIB::pmc1002CtrllineOosModeTable'
List of pmc1002CtrllineOosMode Article
Row definition for the pmc1002CtrllineOosMode
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmc1002CtrllineOosMode
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.50.6.3.74.1.1 |
||||
|
Line Port Out Of Service :This
OID sets the line port Out Of Service <Help> This control defines the service state of the line port |
EKINOPS-MIBEkiStater/w Type Values:
|
.1.3.6.1.4.1.20044.50.6.3.74.1.2 |
pmc1002CtrlxfpOnoffTable
table.1.3.6.1.4.1.20044.50.6.3.208
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1002CtrlxfpOnoffTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-PMC1002-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-PMC1002-MIB::pmc1002CtrlxfpOnoffTable'
List of pmc1002CtrlxfpOnoff Article
Row definition for the pmc1002CtrlxfpOnoff
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmc1002CtrlxfpOnoff
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.50.6.3.208.1.1 |
||||
|
XFP/OTX Optical Laser OFF :This
OID switches off the XFP or the OTX <Help> This control defines the laser state of the line transceiver |
EKINOPS-MIBEkiStater/w Type Values:
|
.1.3.6.1.4.1.20044.50.6.3.208.1.2 |
.1.3.6.1.4.1.20044.50.6.3.209
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1002CtrlxfpLineLoopTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-PMC1002-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-PMC1002-MIB::pmc1002CtrlxfpLineLoopTable'
List of pmc1002CtrlxfpLineLoop Article
Row definition for the pmc1002CtrlxfpLineLoop
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmc1002CtrlxfpLineLoop
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.50.6.3.209.1.1 |
||||
|
Line XFP/OTX Loop :This OID operates
a line loopback on the line XFP or the OTX <Help> This control defines the line loop back of the line transceiver |
EKINOPS-MIBEkiStater/w Type Values:
|
.1.3.6.1.4.1.20044.50.6.3.209.1.2 |
.1.3.6.1.4.1.20044.50.6.3.210
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1002CtrlxfpLineXfiLoopTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-PMC1002-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-PMC1002-MIB::pmc1002CtrlxfpLineXfiLoopTable'
List of pmc1002CtrlxfpLineXfiLoop Article
Row definition for the pmc1002CtrlxfpLineXfiLoop
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmc1002CtrlxfpLineXfiLoop
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.50.6.3.210.1.1 |
||||
|
Line XFP/OTX XFI Loop :This OID
operates a XFI loopback on the line XFP or the OTX <Help> This control defines the XFI loop back of the line transceiver |
EKINOPS-MIBEkiStater/w Type Values:
|
.1.3.6.1.4.1.20044.50.6.3.210.1.2 |
.1.3.6.1.4.1.20044.50.6.3.212
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1002CtrllineTunableChannelTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-PMC1002-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-PMC1002-MIB::pmc1002CtrllineTunableChannelTable'
List of pmc1002CtrllineTunableChannel Article
Row definition for the pmc1002CtrllineTunableChannel
table
table
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the pmc1002CtrllineTunableChannel
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.50.6.3.212.1.1 |
|
ITU Channel :This OID selects
the ITU channel of the Line OTX TLH Laser <Help> This control defines the ITU channel of the Line OTX TLH Laser |
Pmc1002OtxChannelr/w Description: Channel selection on OTX-TLH on client and line ports |
.1.3.6.1.4.1.20044.50.6.3.212.1.2 |
.1.3.6.1.4.1.20044.50.6.3.213
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1002CtrllinePhotodiodeModeTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-PMC1002-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-PMC1002-MIB::pmc1002CtrllinePhotodiodeModeTable'
List of pmc1002CtrllinePhotodiodeMode Article
Row definition for the pmc1002CtrllinePhotodiodeMode
table
table
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
Index definition for the pmc1002CtrllinePhotodiodeMode
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.50.6.3.213.1.1 |
||||||
|
OTX TLH Rx Sens. Mode :This OID
defines the Rx sensiblity mode of the Line OTX TLH <Help> This control defines the receiver sensibility mode of the Line OTX TLH Laser (OTX60, OTX80 or Custom) |
Pmc1002OtxModer/w Type Values:
Description: Different modes on OTX-TLH on client and line ports |
.1.3.6.1.4.1.20044.50.6.3.213.1.2 |
.1.3.6.1.4.1.20044.50.6.3.214
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1002CtrllinePhotodiodeValueTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-PMC1002-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-PMC1002-MIB::pmc1002CtrllinePhotodiodeValueTable'
List of pmc1002CtrllinePhotodiodeValue Article
Row definition for the pmc1002CtrllinePhotodiodeValue
table
table
| Column | Syntax | OID | ||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Index definition for the pmc1002CtrllinePhotodiodeValue
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.50.6.3.214.1.1 |
||||||||||||||||||||||
|
OTX TLH Rx Sensibility :This OID
sets the Rx sensibility of the Line OTX TLH (custom mode only) <Help> This control defines the receiver sensibility value (only in Custom mode) of the Line OTX TLH Laser |
Pmc1002AdjustValuer/w Type Values:
Description: Different values in Adjust mode on OTX-TLH on client and line ports |
.1.3.6.1.4.1.20044.50.6.3.214.1.2 |
.1.3.6.1.4.1.20044.50.6.3.215
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1002CtrllinePowerLaserTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-PMC1002-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-PMC1002-MIB::pmc1002CtrllinePowerLaserTable'
List of pmc1002CtrllinePowerLaser Article
Row definition for the pmc1002CtrllinePowerLaser
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the pmc1002CtrllinePowerLaser
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.50.6.3.215.1.1 |
|
Laser Output Power [3-5] :This
OID sets the output power value on the laser of the Line OTX TLH (AV=Power*10+158) (Unit = dBm) <Help> This control defines the start-up output power of the Line OTX TLH |
Integer32r/w Constraints: range: 0-255 |
.1.3.6.1.4.1.20044.50.6.3.215.1.2 |
.1.3.6.1.4.1.20044.50.6.3.216
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1002CtrlotxVlhResetTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-PMC1002-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-PMC1002-MIB::pmc1002CtrlotxVlhResetTable'
List of pmc1002CtrlotxVlhReset Article
Row definition for the pmc1002CtrlotxVlhReset
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmc1002CtrlotxVlhReset
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.50.6.3.216.1.1 |
||||
|
OTX-VLH Reset :This OID resets
the OTX-VLH module <Help> This control resets the OTX-VLH and its parameters |
EKINOPS-MIBEkiStater/w Type Values:
|
.1.3.6.1.4.1.20044.50.6.3.216.1.2 |
.1.3.6.1.4.1.20044.50.6.3.218
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1002CtrllineLoopTransceiverTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-PMC1002-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-PMC1002-MIB::pmc1002CtrllineLoopTransceiverTable'
List of pmc1002CtrllineLoopTransceiver Article
Row definition for the pmc1002CtrllineLoopTransceiver
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmc1002CtrllineLoopTransceiver
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.50.6.3.218.1.1 |
||||
|
Line Terminal Loopback :This OID
operates a Line Terminal Loopback, looping line input signal on the line output port. The loop is located on all client transceivers <Help> This maintenance parameter operates a L… |
EKINOPS-MIBEkiStater/w Type Values:
|
.1.3.6.1.4.1.20044.50.6.3.218.1.2 |
.1.3.6.1.4.1.20044.50.6.3.335
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1002CtrllineResetAllCountTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-PMC1002-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-PMC1002-MIB::pmc1002CtrllineResetAllCountTable'
List of pmc1002CtrllineResetAllCount Article
Row definition for the pmc1002CtrllineResetAllCount
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmc1002CtrllineResetAllCount
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.50.6.3.335.1.1 |
||||
|
Line Counters Reset :This OID
resets every counter on the line port <Help> This control operates a reset on the statistics current ,previous and history line port counters |
EKINOPS-MIBEkiStater/w Type Values:
|
.1.3.6.1.4.1.20044.50.6.3.335.1.2 |
pmc1002RinvClientTable
table.1.3.6.1.4.1.20044.50.7.1.1
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1002RinvClientTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-PMC1002-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-PMC1002-MIB::pmc1002RinvClientTable'
List of the Clients on the selected module
Row definition for the Client table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index for Client table
|
Integer32 Constraints: range: 1-16 |
.1.3.6.1.4.1.20044.50.7.1.1.1.1 |
|
Inventory for the Client: This OID contains the inventory for the Client Port
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.20044.50.7.1.1.1.2 |
pmc1002RinvLineTable
table.1.3.6.1.4.1.20044.50.7.1.2
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1002RinvLineTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-PMC1002-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-PMC1002-MIB::pmc1002RinvLineTable'
List of the Lines on the selected module
Row definition for the Line table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index for XFP table
|
Integer32 Constraints: range: 1-16 |
.1.3.6.1.4.1.20044.50.7.1.2.1.1 |
|
Inventory for the Line: This OID contains the inventory for the Line
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.20044.50.7.1.2.1.2 |
.1.3.6.1.4.1.20044.50.10.1.1
·
1 row entry
·
8 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1002CfgClientcaiscsfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-PMC1002-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-PMC1002-MIB::pmc1002CfgClientcaiscsfTable'
List of Article
Row definition for the accessCAisCsf
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the clientcaiscsf
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.50.10.1.1.1.1 |
|
CAIS mode on Client Port :This
register enables/disables port laser shutdown on CAIS insertion condition |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.50.10.1.1.1.3 |
|
CSF contributors on Client Port
:This register configures the contributors to upstream CSF insertion on the port. |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.50.10.1.1.1.9 |
|
CSF contributors on Client Port
:This register configures the contributors to upstream CSF insertion on the port. |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.50.10.1.1.1.10 |
|
CAIS contributors on Client Port
:This register configures the contributors to downstream CAIS insertion on port. |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.50.10.1.1.1.17 |
|
CAIS contributors on Client Port
:This register configures the contributors to downstream CAIS insertion on port. |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.50.10.1.1.1.18 |
|
CAIS contributors on Client Port
:This register configures the contributors to downstream CAIS insertion on port. |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.50.10.1.1.1.19 |
|
pmc1002CfgDownLineSyncAlarmsPortndeprecated
CAIS contributors on Client Port
:This register configures the contributors to downstream CAIS insertion on port. |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.50.10.1.1.1.20 |
.1.3.6.1.4.1.20044.50.10.2.1
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1002CfgClientStartupTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-PMC1002-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-PMC1002-MIB::pmc1002CfgClientStartupTable'
List of Article
Row definition for the startup
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the clientStartup
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.50.10.2.1.1.1 |
|
Default Settings on Client Port
:This register configures the default initialisation settings on the port. |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.50.10.2.1.1.3 |
|
Default Protocol on Client Port
:This register configures the default initialisation protocol on the port. |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.50.10.2.1.1.4 |
|
Default Options on Client Port
:This register configures the default options on the client port |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.50.10.2.1.1.6 |
pmc1002CfgXfpTable
table.1.3.6.1.4.1.20044.50.10.2.3
·
1 row entry
·
3 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1002CfgXfpTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-PMC1002-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-PMC1002-MIB::pmc1002CfgXfpTable'
List of Article
Row definition for the startup
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the xfp table
|
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.50.10.2.3.1.1 |
|
Default settings on XFP Port :This
register configures the default initialisation settings on XFP port. |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.50.10.2.3.1.3 |
|
pmc1002CfgDataRateConfXfpPortndeprecated
:Reserved
|
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.50.10.2.3.1.4 |
pmc1002CfgOtxtlhTable
table.1.3.6.1.4.1.20044.50.10.2.4
·
1 row entry
·
11 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1002CfgOtxtlhTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-PMC1002-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-PMC1002-MIB::pmc1002CfgOtxtlhTable'
List of Article
Row definition for the startup
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the otxtlh
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.50.10.2.4.1.1 |
|
Default Line OTX TLH miscellaneous
:This register configures the start-up miscellaneous mode of the Line OTX TLH |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.50.10.2.4.1.3 |
|
Default Line OTX TLH FM amplitude
:This register configures the start-up width of the frequency modulation of the Line OTX TLH |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.50.10.2.4.1.4 |
|
Default Line OTX TLH FM frequency
:This register configures the start-up frequency of the frequency modulation of the Line OTX TLH |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.50.10.2.4.1.5 |
|
Defaut Line OTX TLH output Power
:This register configures the start-up output power of the Line OTX TLH (Unit = dBm) |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.50.10.2.4.1.6 |
|
Default Line OTX TLH Channel :This
register configures the start-up laser channel of the Line OTX TLH |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.50.10.2.4.1.7 |
|
Default Line OTX TLH Grid :This
register configures the start-up laser grid of the Line OTX TLH |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.50.10.2.4.1.8 |
|
Default Line OTX TLH lowest Freq
:This register configures the start-up lowest frequency supported on the Line OTX TLH |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.50.10.2.4.1.9 |
|
pmc1002CfgReservedPortndeprecated
:
|
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.50.10.2.4.1.10 |
|
Default Line OTX TLH APD mode
:This register configures the start-up APD mode of the Line OTX TLH |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.50.10.2.4.1.11 |
|
Default Line OTX TLH APD atten.
:This register configures the start-up APD attenuation on the Line OTX TLH |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.50.10.2.4.1.12 |
.1.3.6.1.4.1.20044.50.10.3.1
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1002CfgLabelclientTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-PMC1002-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-PMC1002-MIB::pmc1002CfgLabelclientTable'
List of Article
Row definition for the labels
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the labelclient
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.50.10.3.1.1.1 |
|
Default settings on the label
of the Ports :These registers configures the default initialisation settings of the labels of the ports. |
SNMPv2-TCDisplayStringr/w Constraints: range: 1-16Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.20044.50.10.3.1.1.3 |
pmc1002CfgLabellineTable
table.1.3.6.1.4.1.20044.50.10.3.2
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1002CfgLabellineTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-PMC1002-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-PMC1002-MIB::pmc1002CfgLabellineTable'
List of Article
Row definition for the labels
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the labelline
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.50.10.3.2.1.1 |
|
Default settings on the label
of the lines :These registers configures the default initialisation settings of the labels of the lines. |
SNMPv2-TCDisplayStringr/w Constraints: range: 1-16Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.20044.50.10.3.2.1.3 |
.1.3.6.1.4.1.20044.50.10.5.1
·
1 row entry
·
6 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1002CfgOtxtlhcapabilitiesTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-PMC1002-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-PMC1002-MIB::pmc1002CfgOtxtlhcapabilitiesTable'
List of Article
Row definition for the startuptablefive
table
table
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the otxtlhcapabilities
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.50.10.5.1.1.1 |
|
Component parameters :This OID
defines the component parameters |
Unsigned32 Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.50.10.5.1.1.3 |
|
Miscellaneous default settings
:This OID defines the miscellaneous parameters |
Unsigned32 Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.50.10.5.1.1.4 |
|
Number of the first channel of
the component :This OID defines the first channel number of the PM |
Unsigned32 Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.50.10.5.1.1.5 |
|
Number of the last channel of
the component :This OID defines the last channel number of the PM |
Unsigned32 Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.50.10.5.1.1.6 |
|
Grid value of the component :This
OID defines the grid of the PM |
Unsigned32 Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.50.10.5.1.1.7 |
.1.3.6.1.4.1.20044.50.12.2.16
·
1 row entry
·
11 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1002PerfTelecomClientCurrent15StatTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-PMC1002-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-PMC1002-MIB::pmc1002PerfTelecomClientCurrent15StatTable'
List of pmc1002PerfTelecomClientCurrent15Stat Article
Row definition for the pmc1002PerfTelecomClientCurrent15Stat
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmc1002PerfTelecomClientCurrent15Stat
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.50.12.2.16.1.1 |
||||
|
Current 15-min CV counter inv.
:This OID indicates that the current 15-min Coding Violation counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.12.2.16.1.2 |
||||
|
Current 15-min CV counter :This
OID gives the current 15-min Coding Violation counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.50.12.2.16.1.3 |
||||
|
Current 15-min ES counter inv.
:This OID indicates that the current 15-min Errored Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.12.2.16.1.4 |
||||
|
Current 15-min ES counter :This
OID gives the current 15-min Errored Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.50.12.2.16.1.5 |
||||
|
Current 15-min SES counter inv.
:This OID indicates that the current 15-min severely Errored Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.12.2.16.1.6 |
||||
|
Current 15-min SES counter :This
OID gives the current 15-min severely Errored Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.50.12.2.16.1.7 |
||||
|
Current 15-min SEFS counter inv.
:This OID indicates that the current 15-min severely Errored Framing Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.12.2.16.1.8 |
||||
|
Current 15-min SEFS counter :This
OID gives the current 15-min severely Errored Framing Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.50.12.2.16.1.9 |
||||
|
Current 15-min UAS counter inv.
:This OID indicates that the current 15-min UnAvailable Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.12.2.16.1.10 |
||||
|
Current 15-min UAS counter :This
OID gives the current 15-min UnAvailable Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.50.12.2.16.1.11 |
.1.3.6.1.4.1.20044.50.12.2.24
·
1 row entry
·
11 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1002PerfTelecomClientPast15StatHistoryPort1Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-PMC1002-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-PMC1002-MIB::pmc1002PerfTelecomClientPast15StatHistoryPort1Table'
List of pmc1002PerfTelecomClientPast15StatHistory Article
Row definition for the pmc1002PerfTelecomClientPast15StatHistory
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmc1002PerfTelecomClientPast15StatHistory
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.50.12.2.24.1.1 |
||||
|
Previous 15-min CV counter inv.
:This OID indicates that the previous 15-min Coding Violation counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.12.2.24.1.2 |
||||
|
Previous 15-min CV counter :This
OID gives the previous 15-min Coding Violation counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.50.12.2.24.1.3 |
||||
|
Previous 15-min ES counter inv.
:This OID indicates that the previous 15-min Errored Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.12.2.24.1.4 |
||||
|
Previous 15-min ES counter :This
OID gives the previous 15-min Errored Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.50.12.2.24.1.5 |
||||
|
Previous 15-min SES counter inv.
:This OID indicates that the previous 15-min severely Errored Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.12.2.24.1.6 |
||||
|
Previous 15-min SES counter :This
OID gives the previous 15-min severely Errored Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.50.12.2.24.1.7 |
||||
|
Previous 15-min SEFS counter inv.
:This OID indicates that the previous 15-min severely Errored Framing Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.12.2.24.1.8 |
||||
|
Previous 15-min SEFS counter :This
OID gives the previous 15-min severely Errored Framing Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.50.12.2.24.1.9 |
||||
|
Previous 15-min UAS counter inv.
:This OID indicates that the previous 15-min UnAvailable Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.12.2.24.1.10 |
||||
|
Previous 15-min UAS counter :This
OID gives the previous 15-min UnAvailable Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.50.12.2.24.1.11 |
.1.3.6.1.4.1.20044.50.12.2.32
·
1 row entry
·
11 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1002PerfTelecomClientCurrent24StatTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-PMC1002-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-PMC1002-MIB::pmc1002PerfTelecomClientCurrent24StatTable'
List of pmc1002PerfTelecomClientCurrent24Stat Article
Row definition for the pmc1002PerfTelecomClientCurrent24Stat
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmc1002PerfTelecomClientCurrent24Stat
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.50.12.2.32.1.1 |
||||
|
Current 24-hours CV counter inv.
:This OID indicates that the current 24-hours Coding Violation counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.12.2.32.1.2 |
||||
|
Current 24-hours CV counter :This
OID gives the current 24-hours Coding Violation counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.50.12.2.32.1.3 |
||||
|
Current 24-hours ES counter inv.
:This OID indicates that the current 24-hours Errored Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.12.2.32.1.4 |
||||
|
Current 24-hours ES counter :This
OID gives the current 24-hours Errored Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.50.12.2.32.1.5 |
||||
|
Current 24-hours SES counter inv.
:This OID indicates that the current 24-hours severely Errored Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.12.2.32.1.6 |
||||
|
Current 24-hours SES counter :This
OID gives the current 24-hours severely Errored Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.50.12.2.32.1.7 |
||||
|
Current 24-hours SEFS counter
inv. :This OID indicates that the current 24-hours severely Errored Framing Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.12.2.32.1.8 |
||||
|
Current 24-hours SEFS counter
:This OID gives the current 24-hours severely Errored Framing Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.50.12.2.32.1.9 |
||||
|
Current 24-hours UAS counter inv.
:This OID indicates that the current 24-hours UnAvailable Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.12.2.32.1.10 |
||||
|
Current 24-hours UAS counter :This
OID gives the current 24-hours UnAvailable Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.50.12.2.32.1.11 |
.1.3.6.1.4.1.20044.50.12.2.40
·
1 row entry
·
11 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1002PerfTelecomClientPast24StatHistoryPort1Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-PMC1002-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-PMC1002-MIB::pmc1002PerfTelecomClientPast24StatHistoryPort1Table'
List of pmc1002PerfTelecomClientPast24StatHistory Article
Row definition for the pmc1002PerfTelecomClientPast24StatHistory
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmc1002PerfTelecomClientPast24StatHistory
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.50.12.2.40.1.1 |
||||
|
Previous 24-hours CV counter inv.
:This OID indicates that the previous 24-hours Coding Violation counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.12.2.40.1.2 |
||||
|
Previous 24-hours CV counter :This
OID gives the previous 24-hours Coding Violation counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.50.12.2.40.1.3 |
||||
|
Previous 24-hours ES counter inv.
:This OID indicates that the previous 24-hours Errored Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.12.2.40.1.4 |
||||
|
Previous 24-hours ES counter :This
OID gives the previous 24-hours Errored Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.50.12.2.40.1.5 |
||||
|
Previous 24-hours SES counter
inv. :This OID indicates that the previous 24-hours severely Errored Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.12.2.40.1.6 |
||||
|
Previous 24-hours SES counter
:This OID gives the previous 24-hours severely Errored Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.50.12.2.40.1.7 |
||||
|
Previous 24-hours SEFS counter
inv. :This OID indicates that the previous 24-hours severely Errored Framing Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.12.2.40.1.8 |
||||
|
Previous 24-hours SEFS counter
:This OID gives the previous 24-hours severely Errored Framing Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.50.12.2.40.1.9 |
||||
|
Previous 24-hours UAS counter
inv. :This OID indicates that the previous 24-hours UnAvailable Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.12.2.40.1.10 |
||||
|
Previous 24-hours UAS counter
:This OID gives the previous 24-hours UnAvailable Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.50.12.2.40.1.11 |
.1.3.6.1.4.1.20044.50.12.2.256
·
1 row entry
·
23 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1002PerfDatacomClientCurrent15StatTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-PMC1002-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-PMC1002-MIB::pmc1002PerfDatacomClientCurrent15StatTable'
List of pmc1002PerfDatacomClientCurrent15Stat Article
Row definition for the pmc1002PerfDatacomClientCurrent15Stat
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmc1002PerfDatacomClientCurrent15Stat
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.50.12.2.256.1.1 |
||||
|
Client Current 15-min Input Bytes
counter inv. :This OID indicates that the current 15-min Bytes counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.12.2.256.1.2 |
||||
|
Client Current 15-min Input Bytes
counter :This OID gives the current 15-min Bytes counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.50.12.2.256.1.3 |
||||
|
Client Current 15-min Input CRC
counter inv. :This OID indicates that the current 15-min CRC counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.12.2.256.1.4 |
||||
|
Client Current 15-min Input CRC
counter :This OID gives the current 15-min CRC counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.50.12.2.256.1.5 |
||||
|
Client Current 15-min Input Broadcast
counter inv. :This OID indicates that the current 15-min Broadcast counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.12.2.256.1.8 |
||||
|
Client Current 15-min Input Broadcast
counter :This OID gives the current 15-min Broadcast counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.50.12.2.256.1.9 |
||||
|
Client Current 15-min Input Multicast
counter inv. :This OID indicates that the current 15-min Multicast counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.12.2.256.1.10 |
||||
|
Client Current 15-min Input Multicast
counter :This OID gives the current 15-min Multicast counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.50.12.2.256.1.11 |
||||
|
Client Current 15-min Input Unicast
counter inv. :This OID indicates that the current 15-min Unicast counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.12.2.256.1.20 |
||||
|
Client Current 15-min Input Unicast
counter :This OID gives the current 15-min Unicast counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.50.12.2.256.1.21 |
||||
|
Client Current 15-min Input Non
Unicast counter inv. :This OID indicates that the current 15-min Non unicast counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.12.2.256.1.22 |
||||
|
Client Current 15-min Input Non
Unicast counter :This OID gives the current 15-min Non Unicast counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.50.12.2.256.1.23 |
||||
|
Client Current 15-min Output Bytes
counter inv. :This OID indicates that the current 15-min Bytes counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.12.2.256.1.26 |
||||
|
Client Current 15-min Output Bytes
counter :This OID gives the current 15-min Bytes counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.50.12.2.256.1.27 |
||||
|
Client Current 15-min Output Broadcast
counter inv. :This OID indicates that the current 15-min Broadcast counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.12.2.256.1.32 |
||||
|
Client Current 15-min Output Broadcast
counter :This OID gives the current 15-min Broadcast counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.50.12.2.256.1.33 |
||||
|
Client Current 15-min Output Multicast
counter inv. :This OID indicates that the current 15-min Multicast counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.12.2.256.1.34 |
||||
|
Client Current 15-min Output Multicast
counter :This OID gives the current 15-min Multicast counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.50.12.2.256.1.35 |
||||
|
Client Current 15-min Output Unicast
counter inv. :This OID indicates that the current 15-min Unicast counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.12.2.256.1.42 |
||||
|
Client Current 15-min Output Unicast
counter :This OID gives the current 15-min Unicast counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.50.12.2.256.1.43 |
||||
|
Client Current 15-min Output Non
Unicast counter inv. :This OID indicates that the current 15-min Non Unicast counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.12.2.256.1.44 |
||||
|
Client Current 15-min Output Non
Unicast counter :This OID gives the current 15-min Non Unicast counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.50.12.2.256.1.45 |
.1.3.6.1.4.1.20044.50.12.2.264
·
1 row entry
·
23 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1002PerfDatacomClientPast15StatHistoryPort1Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-PMC1002-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-PMC1002-MIB::pmc1002PerfDatacomClientPast15StatHistoryPort1Table'
List of pmc1002PerfDatacomClientPast15StatHistory Article
Row definition for the pmc1002PerfDatacomClientPast15StatHistory
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmc1002PerfDatacomClientPast15StatHistory
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.50.12.2.264.1.1 |
||||
|
Client Past 15-min Input Bytes
counter inv. :This OID indicates that the past 15-min Bytes counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.12.2.264.1.2 |
||||
|
Client Past 15-min Input Bytes
counter :This OID gives the past 15-min Bytes counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.50.12.2.264.1.3 |
||||
|
Client Past 15-min Input CRC counter
inv. :This OID indicates that the past 15-min CRC counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.12.2.264.1.4 |
||||
|
Client Past 15-min Input CRC counter
:This OID gives the past 15-min CRC counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.50.12.2.264.1.5 |
||||
|
Client Past 15-min Input Broadcast
counter inv. :This OID indicates that the past 15-min Broadcast counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.12.2.264.1.8 |
||||
|
Client Past 15-min Input Broadcast
counter :This OID gives the past 15-min Broadcast counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.50.12.2.264.1.9 |
||||
|
Client Past 15-min Input Multicast
counter inv. :This OID indicates that the past 15-min Multicast counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.12.2.264.1.10 |
||||
|
Client Past 15-min Input Multicast
counter :This OID gives the past 15-min Multicast counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.50.12.2.264.1.11 |
||||
|
Client Past 15-min Input Unicast
counter inv. :This OID indicates that the past 15-min Unicast counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.12.2.264.1.20 |
||||
|
Client Past 15-min Input Unicast
counter :This OID gives the past 15-min Unicast counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.50.12.2.264.1.21 |
||||
|
Client Past 15-min Input Non Unicast
counter inv. :This OID indicates that the past 15-min Non unicast counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.12.2.264.1.22 |
||||
|
Client Past 15-min Input Non Unicast
counter :This OID gives the past 15-min Non Unicast counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.50.12.2.264.1.23 |
||||
|
Client Past 15-min Output Bytes
counter inv. :This OID indicates that the past 15-min Bytes counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.12.2.264.1.26 |
||||
|
Client Past 15-min Output Bytes
counter :This OID gives the past 15-min Bytes counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.50.12.2.264.1.27 |
||||
|
Client Past 15-min Output Broadcast
counter inv. :This OID indicates that the past 15-min Broadcast counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.12.2.264.1.32 |
||||
|
Client Past 15-min Output Broadcast
counter :This OID gives the past 15-min Broadcast counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.50.12.2.264.1.33 |
||||
|
Client Past 15-min Output Multicast
counter inv. :This OID indicates that the past 15-min Multicast counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.12.2.264.1.34 |
||||
|
Client Past 15-min Output Multicast
counter :This OID gives the past 15-min Multicast counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.50.12.2.264.1.35 |
||||
|
Client Past 15-min Output Unicast
counter inv. :This OID indicates that the past 15-min Unicast counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.12.2.264.1.42 |
||||
|
Client Past 15-min Output Unicast
counter :This OID gives the past 15-min Unicast counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.50.12.2.264.1.43 |
||||
|
Client Past 15-min Output Non
Unicast counter inv. :This OID indicates that the past 15-min Non Unicast counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.12.2.264.1.44 |
||||
|
Client Past 15-min Output Non
Unicast counter :This OID gives the past 15-min Non Unicast counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.50.12.2.264.1.45 |
.1.3.6.1.4.1.20044.50.12.2.272
·
1 row entry
·
23 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1002PerfDatacomClientCurrent24StatTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-PMC1002-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-PMC1002-MIB::pmc1002PerfDatacomClientCurrent24StatTable'
List of pmc1002PerfDatacomClientCurrent24Stat Article
Row definition for the pmc1002PerfDatacomClientCurrent24Stat
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmc1002PerfDatacomClientCurrent24Stat
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.50.12.2.272.1.1 |
||||
|
Client Current 24-hours Input
Bytes counter inv. :This OID indicates that the current 24-hours Bytes counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.12.2.272.1.2 |
||||
|
Client Current 24-hours Input
Bytes counter :This OID gives the current 24-hours Bytes counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.50.12.2.272.1.3 |
||||
|
Client Current 24-hours Input
CRC counter inv. :This OID indicates that the current 24-hours CRC counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.12.2.272.1.4 |
||||
|
Client Current 24-hours Input
CRC counter :This OID gives the current 24-hours CRC counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.50.12.2.272.1.5 |
||||
|
Client Current 24-hours Input
Broadcast counter inv. :This OID indicates that the current 24-hours Broadcast counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.12.2.272.1.8 |
||||
|
Client Current 24-hours Input
Broadcast counter :This OID gives the current 24-hours Broadcast counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.50.12.2.272.1.9 |
||||
|
Client Current 24-hours Input
Multicast counter inv. :This OID indicates that the current 24-hours Multicast counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.12.2.272.1.10 |
||||
|
Client Current 24-hours Input
Multicast counter :This OID gives the current 24-hours Multicast counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.50.12.2.272.1.11 |
||||
|
Client Current 24-hours Input
Unicast counter inv. :This OID indicates that the current 24-hours Unicast counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.12.2.272.1.20 |
||||
|
Client Current 24-hours Input
Unicast counter :This OID gives the current 24-hours Unicast counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.50.12.2.272.1.21 |
||||
|
Client Current 24-hours Input
Non Unicast counter inv. :This OID indicates that the current 24-hours Non unicast counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.12.2.272.1.22 |
||||
|
Client Current 24-hours Input
Non Unicast counter :This OID gives the current 24-hours Non Unicast counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.50.12.2.272.1.23 |
||||
|
Client Current 24-hours Output
Bytes counter inv. :This OID indicates that the current 24-hours Bytes counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.12.2.272.1.26 |
||||
|
Client Current 24-hours Output
Bytes counter :This OID gives the current 24-hours Bytes counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.50.12.2.272.1.27 |
||||
|
Client Current 24-hours Output
Broadcast counter inv. :This OID indicates that the current 24-hours Broadcast counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.12.2.272.1.32 |
||||
|
Client Current 24-hours Output
Broadcast counter :This OID gives the current 24-hours Broadcast counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.50.12.2.272.1.33 |
||||
|
Client Current 24-hours Output
Multicast counter inv. :This OID indicates that the current 24-hours Multicast counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.12.2.272.1.34 |
||||
|
Client Current 24-hours Output
Multicast counter :This OID gives the current 24-hours Multicast counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.50.12.2.272.1.35 |
||||
|
Client Current 24-hours Output
Unicast counter inv. :This OID indicates that the current 24-hours Unicast counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.12.2.272.1.42 |
||||
|
Client Current 24-hours Output
Unicast counter :This OID gives the current 24-hours Unicast counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.50.12.2.272.1.43 |
||||
|
Client Current 24-hours Output
Non Unicast counter inv. :This OID indicates that the current 24-hours Non Unicast counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.12.2.272.1.44 |
||||
|
Client Current 24-hours Output
Non Unicast counter :This OID gives the current 24-hours Non Unicast counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.50.12.2.272.1.45 |
.1.3.6.1.4.1.20044.50.12.2.280
·
1 row entry
·
23 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1002PerfDatacomClientPast24StatHistoryPort1Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-PMC1002-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-PMC1002-MIB::pmc1002PerfDatacomClientPast24StatHistoryPort1Table'
List of pmc1002PerfDatacomClientPast24StatHistory Article
Row definition for the pmc1002PerfDatacomClientPast24StatHistory
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmc1002PerfDatacomClientPast24StatHistory
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.50.12.2.280.1.1 |
||||
|
Client Past 24-hours Input Bytes
counter inv. :This OID indicates that the past 24-hours Bytes counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.12.2.280.1.2 |
||||
|
Client Past 24-hours Input Bytes
counter :This OID gives the past 24-hours Bytes counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.50.12.2.280.1.3 |
||||
|
Client Past 24-hours Input CRC
counter inv. :This OID indicates that the past 24-hours CRC counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.12.2.280.1.4 |
||||
|
Client Past 24-hours Input CRC
counter :This OID gives the past 24-hours CRC counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.50.12.2.280.1.5 |
||||
|
Client Past 24-hours Input Broadcast
counter inv. :This OID indicates that the past 24-hours Broadcast counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.12.2.280.1.8 |
||||
|
Client Past 24-hours Input Broadcast
counter :This OID gives the past 24-hours Broadcast counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.50.12.2.280.1.9 |
||||
|
Client Past 24-hours Input Multicast
counter inv. :This OID indicates that the past 24-hours Multicast counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.12.2.280.1.10 |
||||
|
Client Past 24-hours Input Multicast
counter :This OID gives the past 24-hours Multicast counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.50.12.2.280.1.11 |
||||
|
Client Past 24-hours Input Unicast
counter inv. :This OID indicates that the past 24-hours Unicast counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.12.2.280.1.20 |
||||
|
Client Past 24-hours Input Unicast
counter :This OID gives the past 24-hours Unicast counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.50.12.2.280.1.21 |
||||
|
Client Past 24-hours Input Non
Unicast counter inv. :This OID indicates that the past 24-hours Non unicast counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.12.2.280.1.22 |
||||
|
Client Past 24-hours Input Non
Unicast counter :This OID gives the past 24-hours Non Unicast counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.50.12.2.280.1.23 |
||||
|
Client Past 24-hours Output Bytes
counter inv. :This OID indicates that the past 24-hours Bytes counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.12.2.280.1.26 |
||||
|
Client Past 24-hours Output Bytes
counter :This OID gives the past 24-hours Bytes counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.50.12.2.280.1.27 |
||||
|
Client Past 24-hours Output Broadcast
counter inv. :This OID indicates that the past 24-hours Broadcast counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.12.2.280.1.32 |
||||
|
Client Past 24-hours Output Broadcast
counter :This OID gives the past 24-hours Broadcast counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.50.12.2.280.1.33 |
||||
|
Client Past 24-hours Output Multicast
counter inv. :This OID indicates that the past 24-hours Multicast counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.12.2.280.1.34 |
||||
|
Client Past 24-hours Output Multicast
counter :This OID gives the past 24-hours Multicast counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.50.12.2.280.1.35 |
||||
|
Client Past 24-hours Output Unicast
counter inv. :This OID indicates that the past 24-hours Unicast counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.12.2.280.1.42 |
||||
|
Client Past 24-hours Output Unicast
counter :This OID gives the past 24-hours Unicast counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.50.12.2.280.1.43 |
||||
|
Client Past 24-hours Output Non
Unicast counter inv. :This OID indicates that the past 24-hours Non Unicast counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.12.2.280.1.44 |
||||
|
Client Past 24-hours Output Non
Unicast counter :This OID gives the past 24-hours Non Unicast counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.50.12.2.280.1.45 |
.1.3.6.1.4.1.20044.50.12.3.128
·
1 row entry
·
11 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1002PerfTelecomLineCurrent15StatTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-PMC1002-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-PMC1002-MIB::pmc1002PerfTelecomLineCurrent15StatTable'
List of pmc1002PerfTelecomLineCurrent15Stat Article
Row definition for the pmc1002PerfTelecomLineCurrent15Stat
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmc1002PerfTelecomLineCurrent15Stat
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.50.12.3.128.1.1 |
||||
|
Current 15-min CV counter inv.
:This OID indicates that the current 15-min Coding Violation counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.12.3.128.1.2 |
||||
|
Current 15-min CV counter :This
OID gives the current 15-min Coding Violation counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.50.12.3.128.1.3 |
||||
|
Current 15-min ES counter inv.
:This OID indicates that the current 15-min Errored Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.12.3.128.1.4 |
||||
|
Current 15-min ES counter :This
OID gives the current 15-min Errored Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.50.12.3.128.1.5 |
||||
|
Current 15-min SES counter inv.
:This OID indicates that the current 15-min severely Errored Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.12.3.128.1.6 |
||||
|
Current 15-min SES counter :This
OID gives the current 15-min severely Errored Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.50.12.3.128.1.7 |
||||
|
Current 15-min SEFS counter inv.
:This OID indicates that the current 15-min severely Errored Framing Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.12.3.128.1.8 |
||||
|
Current 15-min SEFS counter :This
OID gives the current 15-min severely Errored Framing Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.50.12.3.128.1.9 |
||||
|
Current 15-min UAS counter inv.
:This OID indicates that the current 15-min UnAvailable Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.12.3.128.1.10 |
||||
|
Current 15-min UAS counter :This
OID gives the current 15-min UnAvailable Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.50.12.3.128.1.11 |
.1.3.6.1.4.1.20044.50.12.3.129
·
1 row entry
·
11 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1002PerfTelecomLinePast15StatHistoryPort1Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-PMC1002-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-PMC1002-MIB::pmc1002PerfTelecomLinePast15StatHistoryPort1Table'
List of pmc1002PerfTelecomLinePast15StatHistory Article
Row definition for the pmc1002PerfTelecomLinePast15StatHistory
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmc1002PerfTelecomLinePast15StatHistory
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.50.12.3.129.1.1 |
||||
|
Previous 15-min CV counter inv.
:This OID indicates that the previous 15-min Coding Violation counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.12.3.129.1.2 |
||||
|
Previous 15-min CV counter :This
OID gives the previous 15-min Coding Violation counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.50.12.3.129.1.3 |
||||
|
Previous 15-min ES counter inv.
:This OID indicates that the previous 15-min Errored Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.12.3.129.1.4 |
||||
|
Previous 15-min ES counter :This
OID gives the previous 15-min Errored Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.50.12.3.129.1.5 |
||||
|
Previous 15-min SES counter inv.
:This OID indicates that the previous 15-min severely Errored Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.12.3.129.1.6 |
||||
|
Previous 15-min SES counter :This
OID gives the previous 15-min severely Errored Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.50.12.3.129.1.7 |
||||
|
Previous 15-min SEFS counter inv.
:This OID indicates that the previous 15-min severely Errored Framing Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.12.3.129.1.8 |
||||
|
Previous 15-min SEFS counter :This
OID gives the previous 15-min severely Errored Framing Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.50.12.3.129.1.9 |
||||
|
Previous 15-min UAS counter inv.
:This OID indicates that the previous 15-min UnAvailable Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.12.3.129.1.10 |
||||
|
Previous 15-min UAS counter :This
OID gives the previous 15-min UnAvailable Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.50.12.3.129.1.11 |
.1.3.6.1.4.1.20044.50.12.3.130
·
1 row entry
·
11 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1002PerfTelecomLineCurrent24StatTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-PMC1002-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-PMC1002-MIB::pmc1002PerfTelecomLineCurrent24StatTable'
List of pmc1002PerfTelecomLineCurrent24Stat Article
Row definition for the pmc1002PerfTelecomLineCurrent24Stat
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmc1002PerfTelecomLineCurrent24Stat
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.50.12.3.130.1.1 |
||||
|
Current 24-hours CV counter inv.
:This OID indicates that the current 24-hours Coding Violation counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.12.3.130.1.2 |
||||
|
Current 24-hours CV counter :This
OID gives the current 24-hours Coding Violation counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.50.12.3.130.1.3 |
||||
|
Current 24-hours ES counter inv.
:This OID indicates that the current 24-hours Errored Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.12.3.130.1.4 |
||||
|
Current 24-hours ES counter :This
OID gives the current 24-hours Errored Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.50.12.3.130.1.5 |
||||
|
Current 24-hours SES counter inv.
:This OID indicates that the current 24-hours severely Errored Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.12.3.130.1.6 |
||||
|
Current 24-hours SES counter :This
OID gives the current 24-hours severely Errored Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.50.12.3.130.1.7 |
||||
|
Current 24-hours SEFS counter
inv. :This OID indicates that the current 24-hours severely Errored Framing Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.12.3.130.1.8 |
||||
|
Current 24-hours SEFS counter
:This OID gives the current 24-hours severely Errored Framing Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.50.12.3.130.1.9 |
||||
|
Current 24-hours UAS counter inv.
:This OID indicates that the current 24-hours UnAvailable Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.12.3.130.1.10 |
||||
|
Current 24-hours UAS counter :This
OID gives the current 24-hours UnAvailable Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.50.12.3.130.1.11 |
.1.3.6.1.4.1.20044.50.12.3.131
·
1 row entry
·
11 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1002PerfTelecomLinePast24StatHistoryPort1Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-PMC1002-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-PMC1002-MIB::pmc1002PerfTelecomLinePast24StatHistoryPort1Table'
List of pmc1002PerfTelecomLinePast24StatHistory Article
Row definition for the pmc1002PerfTelecomLinePast24StatHistory
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmc1002PerfTelecomLinePast24StatHistory
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.50.12.3.131.1.1 |
||||
|
Previous 24-hours CV counter inv.
:This OID indicates that the previous 24-hours Coding Violation counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.12.3.131.1.2 |
||||
|
Previous 24-hours CV counter :This
OID gives the previous 24-hours Coding Violation counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.50.12.3.131.1.3 |
||||
|
Previous 24-hours ES counter inv.
:This OID indicates that the previous 24-hours Errored Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.12.3.131.1.4 |
||||
|
Previous 24-hours ES counter :This
OID gives the previous 24-hours Errored Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.50.12.3.131.1.5 |
||||
|
Previous 24-hours SES counter
inv. :This OID indicates that the previous 24-hours severely Errored Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.12.3.131.1.6 |
||||
|
Previous 24-hours SES counter
:This OID gives the previous 24-hours severely Errored Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.50.12.3.131.1.7 |
||||
|
Previous 24-hours SEFS counter
inv. :This OID indicates that the previous 24-hours severely Errored Framing Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.12.3.131.1.8 |
||||
|
Previous 24-hours SEFS counter
:This OID gives the previous 24-hours severely Errored Framing Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.50.12.3.131.1.9 |
||||
|
Previous 24-hours UAS counter
inv. :This OID indicates that the previous 24-hours UnAvailable Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.12.3.131.1.10 |
||||
|
Previous 24-hours UAS counter
:This OID gives the previous 24-hours UnAvailable Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.50.12.3.131.1.11 |
.1.3.6.1.4.1.20044.50.12.4.1.16
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1002MonupRmonByteCntTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-PMC1002-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-PMC1002-MIB::pmc1002MonupRmonByteCntTable'
List of pmc1002MonupRmonByteCnt Article
Row definition for the pmc1002MonupRmonByteCnt
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmc1002MonupRmonByteCnt
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.50.12.4.1.16.1.1 |
||||
|
Client Input Bytes :This counter
is increased each time a data byte is received on the client port <Help> This counter gives the number of bytes received on the client port |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.50.12.4.1.16.1.2 |
||||
|
Input Bytes Counter Error :This
OID when set indicates the input Bytes counter value is invalid on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.12.4.1.16.1.3 |
||||
|
Input Bytes Counter Overload :This
OID when set indicates an input Bytes counter overload on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.12.4.1.16.1.4 |
.1.3.6.1.4.1.20044.50.12.4.1.24
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1002MonupRmonCrcErrorCntTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-PMC1002-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-PMC1002-MIB::pmc1002MonupRmonCrcErrorCntTable'
List of pmc1002MonupRmonCrcErrorCnt Article
Row definition for the pmc1002MonupRmonCrcErrorCnt
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmc1002MonupRmonCrcErrorCnt
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.50.12.4.1.24.1.1 |
||||
|
Client Input CRC Errors :This
counter is increased each time a CRC error is detected on the client port. <Help> This counter gives the number of CRC Errors received on the client port |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.50.12.4.1.24.1.2 |
||||
|
Input CRC Errors Counter Error
:This OID when set indicates the input CRC Errors counter value is invalid on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.12.4.1.24.1.3 |
||||
|
Input CRC Errors Counter Overload
:This OID when set indicates an input CRC Errors counter overload on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.12.4.1.24.1.4 |
.1.3.6.1.4.1.20044.50.12.4.1.32
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1002MonupRmonPacketsCntTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-PMC1002-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-PMC1002-MIB::pmc1002MonupRmonPacketsCntTable'
List of pmc1002MonupRmonPacketsCnt Article
Row definition for the pmc1002MonupRmonPacketsCnt
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmc1002MonupRmonPacketsCnt
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.50.12.4.1.32.1.1 |
||||
|
Client Input Packets :This counter
is increased each time a packet is received on the client port <Help> This counter gives the number of packets received on the client port |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.50.12.4.1.32.1.2 |
||||
|
Input Packets Counter Error :This
OID when set indicates the input Packets counter value is invalid on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.12.4.1.32.1.3 |
||||
|
Input Packets Counter Overload
:This OID when set indicates an input Packets counter overload on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.12.4.1.32.1.4 |
.1.3.6.1.4.1.20044.50.12.4.1.40
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1002MonupRmonBroadcastCntTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-PMC1002-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-PMC1002-MIB::pmc1002MonupRmonBroadcastCntTable'
List of pmc1002MonupRmonBroadcastCnt Article
Row definition for the pmc1002MonupRmonBroadcastCnt
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmc1002MonupRmonBroadcastCnt
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.50.12.4.1.40.1.1 |
||||
|
Client Input Broadcast Packets
:This counter is increased each time a broadcast packet is received on the client port. <Help> This counter gives the number of Broadcast packets received on the client port |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.50.12.4.1.40.1.2 |
||||
|
Input Broadcast Counter Error
:This OID when set indicates the input Broadcast counter value is invalid on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.12.4.1.40.1.3 |
||||
|
Input Broadcast Counter Overload
:This OID when set indicates an input Broadcast counter overload on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.12.4.1.40.1.4 |
.1.3.6.1.4.1.20044.50.12.4.1.48
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1002MonupRmonMulticastCntTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-PMC1002-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-PMC1002-MIB::pmc1002MonupRmonMulticastCntTable'
List of pmc1002MonupRmonMulticastCnt Article
Row definition for the pmc1002MonupRmonMulticastCnt
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmc1002MonupRmonMulticastCnt
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.50.12.4.1.48.1.1 |
||||
|
Client Input Multicast Packets
:This counter is increased each time a Multicast packet is received on the client port. <Help> This counter gives the number of Multicast packets received on the client port |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.50.12.4.1.48.1.2 |
||||
|
Input Multicast Counter Error
:This OID when set indicates the input Multicast counter value is invalid on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.12.4.1.48.1.3 |
||||
|
Input Multicast Counter Overload
:This OID when set indicates an input Multicast counter overload on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.12.4.1.48.1.4 |
.1.3.6.1.4.1.20044.50.12.4.1.56
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1002MonupRmonTimerCntTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-PMC1002-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-PMC1002-MIB::pmc1002MonupRmonTimerCntTable'
List of pmc1002MonupRmonTimerCnt Article
Row definition for the pmc1002MonupRmonTimerCnt
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmc1002MonupRmonTimerCnt
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.50.12.4.1.56.1.1 |
||||
|
RMON Timer On Client Input :This
is the timing counter dedicated to the upstream RMON counters. It is incremented every 125 us. |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.50.12.4.1.56.1.2 |
||||
|
Input RMON Timer Error :This OID
when set indicates the input RMON timer is invalid on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.12.4.1.56.1.3 |
||||
|
Input RMON Timer Overload :This
OID when set indicates an input RMON timer overload on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.12.4.1.56.1.4 |
.1.3.6.1.4.1.20044.50.12.4.1.64
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1002MonupRmonPauseFrameCntTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-PMC1002-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-PMC1002-MIB::pmc1002MonupRmonPauseFrameCntTable'
List of pmc1002MonupRmonPauseFrameCnt Article
Row definition for the pmc1002MonupRmonPauseFrameCnt
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmc1002MonupRmonPauseFrameCnt
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.50.12.4.1.64.1.1 |
||||
|
Client Input Pause Frames :This
counter is increased each time a Pause frame is received on the client port |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.50.12.4.1.64.1.2 |
||||
|
Input Pause Counter Error :This
OID when set indicates the input Pause counter value is invalid on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.12.4.1.64.1.3 |
||||
|
Input Pause Counter Overload :This
OID when set indicates an input Pause counter overload on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.12.4.1.64.1.4 |
.1.3.6.1.4.1.20044.50.12.4.1.72
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1002MonupRmonDropFrameCntTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-PMC1002-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-PMC1002-MIB::pmc1002MonupRmonDropFrameCntTable'
List of pmc1002MonupRmonDropFrameCnt Article
Row definition for the pmc1002MonupRmonDropFrameCnt
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmc1002MonupRmonDropFrameCnt
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.50.12.4.1.72.1.1 |
||||
|
Client Input Drop Packets :This
counter is increased each time a Frame is dropped on the input client port |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.50.12.4.1.72.1.2 |
||||
|
Input Drop Counter Error :This
OID when set indicates the input Drop counter value is invalid on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.12.4.1.72.1.3 |
||||
|
Input Drop Counter Overload :This
OID when set indicates an input Drop counter overload on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.12.4.1.72.1.4 |
.1.3.6.1.4.1.20044.50.12.4.1.80
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1002MonupRmonBitsCntTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-PMC1002-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-PMC1002-MIB::pmc1002MonupRmonBitsCntTable'
List of pmc1002MonupRmonBitsCnt Article
Row definition for the pmc1002MonupRmonBitsCnt
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmc1002MonupRmonBitsCnt
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.50.12.4.1.80.1.1 |
||||
|
Client Input Bits :This counter
is increased each time a bit is received on the input client port |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.50.12.4.1.80.1.2 |
||||
|
Input Bits Counter Error :This
OID when set indicates the input Bits counter value is invalid on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.12.4.1.80.1.3 |
||||
|
Input Bits Counter Overload :This
OID when set indicates an input Bits counter overload on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.12.4.1.80.1.4 |
.1.3.6.1.4.1.20044.50.12.4.1.88
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1002MonupRmonUnicastCntTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-PMC1002-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-PMC1002-MIB::pmc1002MonupRmonUnicastCntTable'
List of pmc1002MonupRmonUnicastCnt Article
Row definition for the pmc1002MonupRmonUnicastCnt
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmc1002MonupRmonUnicastCnt
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.50.12.4.1.88.1.1 |
||||
|
Client Input Unicast Packets :This
counter is increased each time a Unicast packet is received on client input <Help> This counter gives the number of Unicast packets received on the client input port |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.50.12.4.1.88.1.2 |
||||
|
Input Unicast Counter Error :This
OID when set indicates the input Drop counter value is invalid on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.12.4.1.88.1.3 |
||||
|
Input Unicast Counter Overload
:This OID when set indicates an input Drop counter overload on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.12.4.1.88.1.4 |
.1.3.6.1.4.1.20044.50.12.4.1.96
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1002MonupRmonNonUnicastCntTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-PMC1002-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-PMC1002-MIB::pmc1002MonupRmonNonUnicastCntTable'
List of pmc1002MonupRmonNonUnicastCnt Article
Row definition for the pmc1002MonupRmonNonUnicastCnt
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmc1002MonupRmonNonUnicastCnt
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.50.12.4.1.96.1.1 |
||||
|
Client Input Non Unicast Packets
:This counter is increased each time a Non Unicast packet is received on client input <Help> This counter gives the number of Non Unicast packets received on the client input p… |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.50.12.4.1.96.1.2 |
||||
|
Input Non Unicast Counter Error
:This OID when set indicates the input Bits counter value is invalid on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.12.4.1.96.1.3 |
||||
|
Input Non Unicast Counter Overload
:This OID when set indicates an input Bits counter overload on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.12.4.1.96.1.4 |
.1.3.6.1.4.1.20044.50.12.4.1.112
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1002MondwRmonByteCntTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-PMC1002-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-PMC1002-MIB::pmc1002MondwRmonByteCntTable'
List of pmc1002MondwRmonByteCnt Article
Row definition for the pmc1002MondwRmonByteCnt
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmc1002MondwRmonByteCnt
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.50.12.4.1.112.1.1 |
||||
|
Client Output Bytes :This counter
is increased each time a data byte is transmitted on the client port. <Help> This counter gives the number of bytes transmitted on the client port |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.50.12.4.1.112.1.2 |
||||
|
Output Bytes Counter Error :This
OID when set indicates the output Bytes counter value is invalid on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.12.4.1.112.1.3 |
||||
|
Output Bytes Counter Overload
:This OID when set indicates an output Bytes counter overload on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.12.4.1.112.1.4 |
.1.3.6.1.4.1.20044.50.12.4.1.120
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1002MondwRmonCrcErrorCntTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-PMC1002-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-PMC1002-MIB::pmc1002MondwRmonCrcErrorCntTable'
List of pmc1002MondwRmonCrcErrorCnt Article
Row definition for the pmc1002MondwRmonCrcErrorCnt
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmc1002MondwRmonCrcErrorCnt
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.50.12.4.1.120.1.1 |
||||
|
Client Output CRC Errors :This
counter is increased each time a CRC error is detected on the output client port <Help> This counter gives the number of CRC Errors transmitted on the client port |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.50.12.4.1.120.1.2 |
||||
|
Output CRC Errors Counter Error
:This OID when set indicates the output CRC Errors counter value is invalid on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.12.4.1.120.1.3 |
||||
|
Output CRC Errors Counter Overload
:This OID when set indicates an output CRC Errors counter overload on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.12.4.1.120.1.4 |
.1.3.6.1.4.1.20044.50.12.4.1.128
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1002MondwRmonPacketsCntTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-PMC1002-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-PMC1002-MIB::pmc1002MondwRmonPacketsCntTable'
List of pmc1002MondwRmonPacketsCnt Article
Row definition for the pmc1002MondwRmonPacketsCnt
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmc1002MondwRmonPacketsCnt
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.50.12.4.1.128.1.1 |
||||
|
Client Output Packets :This counter
is increased each time a packet is transmitted on the client port. <Help> This counter gives the number of packets transmitted on the client port |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.50.12.4.1.128.1.2 |
||||
|
Output Packets Counter Error :This
OID when set indicates the output Packets counter value is invalid on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.12.4.1.128.1.3 |
||||
|
Output Packets Counter Overload
:This OID when set indicates an output Packets counter overload on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.12.4.1.128.1.4 |
.1.3.6.1.4.1.20044.50.12.4.1.136
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1002MondwRmonBroadcastCntTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-PMC1002-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-PMC1002-MIB::pmc1002MondwRmonBroadcastCntTable'
List of pmc1002MondwRmonBroadcastCnt Article
Row definition for the pmc1002MondwRmonBroadcastCnt
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmc1002MondwRmonBroadcastCnt
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.50.12.4.1.136.1.1 |
||||
|
Client Output Broadcast Packets
:This counter is increased each time a broadcast packet is transmitted on the client port. <Help> This counter gives the number of Broadcast packets transmitted on the client port |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.50.12.4.1.136.1.2 |
||||
|
Output Broadcast Counter Error
:This OID when set indicates the output Broadcast counter value is invalid on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.12.4.1.136.1.3 |
||||
|
Output Broadcast Counter Overload
:This OID when set indicates an output Broadcast counter overload on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.12.4.1.136.1.4 |
.1.3.6.1.4.1.20044.50.12.4.1.144
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1002MondwRmonMulticastCntTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-PMC1002-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-PMC1002-MIB::pmc1002MondwRmonMulticastCntTable'
List of pmc1002MondwRmonMulticastCnt Article
Row definition for the pmc1002MondwRmonMulticastCnt
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmc1002MondwRmonMulticastCnt
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.50.12.4.1.144.1.1 |
||||
|
Client Output Multicast Packets
:This counter is increased each time a Multicast packet is tra,smitted on the client port. <Help> This counter gives the number of Multicast packets transmitted on the client port |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.50.12.4.1.144.1.2 |
||||
|
Output Multicast Counter Error
:This OID when set indicates the output Multicast counter value is invalid on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.12.4.1.144.1.3 |
||||
|
Output Multicast Counter Overload
:This OID when set indicates an output Multicast counter overload on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.12.4.1.144.1.4 |
.1.3.6.1.4.1.20044.50.12.4.1.152
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1002MondwRmonPauseFrameCntTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-PMC1002-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-PMC1002-MIB::pmc1002MondwRmonPauseFrameCntTable'
List of pmc1002MondwRmonPauseFrameCnt Article
Row definition for the pmc1002MondwRmonPauseFrameCnt
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmc1002MondwRmonPauseFrameCnt
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.50.12.4.1.152.1.1 |
||||
|
Client Output Pause Frames :This
counter is increased each time a Pause frame is generated by the PM on the client port |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.50.12.4.1.152.1.2 |
||||
|
Output Pause Counter Error :This
OID when set indicates the output Pause counter value is invalid on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.12.4.1.152.1.3 |
||||
|
Output Pause Counter Overload
:This OID when set indicates an output Pause counter overload on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.12.4.1.152.1.4 |
.1.3.6.1.4.1.20044.50.12.4.1.160
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1002MondwRmonTimerCntTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-PMC1002-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-PMC1002-MIB::pmc1002MondwRmonTimerCntTable'
List of pmc1002MondwRmonTimerCnt Article
Row definition for the pmc1002MondwRmonTimerCnt
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmc1002MondwRmonTimerCnt
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.50.12.4.1.160.1.1 |
||||
|
RMON Timer On Client Output :This
is the timing counter dedicated to the downstream RMON counters. It is incremented every 125 us. |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.50.12.4.1.160.1.2 |
||||
|
Output RMON Timer Error :This
OID when set indicates the output RMON timer is invalid on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.12.4.1.160.1.3 |
||||
|
Output RMON Timer Overload :This
OID when set indicates an output RMON timer overload on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.12.4.1.160.1.4 |
.1.3.6.1.4.1.20044.50.12.4.1.168
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1002MondwRmonBitsCntTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-PMC1002-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-PMC1002-MIB::pmc1002MondwRmonBitsCntTable'
List of pmc1002MondwRmonBitsCnt Article
Row definition for the pmc1002MondwRmonBitsCnt
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmc1002MondwRmonBitsCnt
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.50.12.4.1.168.1.1 |
||||
|
Client Output Bits :This counter
is increased each time a bit is received on the Output client port |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.50.12.4.1.168.1.2 |
||||
|
Output Bits Counter Error :This
OID when set indicates the output Bits counter value is invalid on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.12.4.1.168.1.3 |
||||
|
Output Bits Counter Overload :This
OID when set indicates an output Bits counter overload on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.12.4.1.168.1.4 |
.1.3.6.1.4.1.20044.50.12.4.1.176
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1002MondwRmonUnicastCntTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-PMC1002-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-PMC1002-MIB::pmc1002MondwRmonUnicastCntTable'
List of pmc1002MondwRmonUnicastCnt Article
Row definition for the pmc1002MondwRmonUnicastCnt
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmc1002MondwRmonUnicastCnt
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.50.12.4.1.176.1.1 |
||||
|
Client Output Unicast Packets
:This counter is increased each time a Unicast packet is transmitted on client port <Help> This counter gives the number of Unicast packets transmitted on the client output port |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.50.12.4.1.176.1.2 |
||||
|
Output Unicast Counter Error :This
OID when set indicates the output RMON timer is invalid on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.12.4.1.176.1.3 |
||||
|
Output Unicast Counter Overload
:This OID when set indicates an output RMON timer overload on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.12.4.1.176.1.4 |
.1.3.6.1.4.1.20044.50.12.4.1.184
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmc1002MondwRmonNonUnicastCntTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-PMC1002-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-PMC1002-MIB::pmc1002MondwRmonNonUnicastCntTable'
List of pmc1002MondwRmonNonUnicastCnt Article
Row definition for the pmc1002MondwRmonNonUnicastCnt
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmc1002MondwRmonNonUnicastCnt
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.50.12.4.1.184.1.1 |
||||
|
Client Output Non Unicast Packets
:This counter is increased each time a Non Unicast packet is transmitted on client port <Help> This counter gives the number of Non Unicast packets transmitted on the client ou… |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.50.12.4.1.184.1.2 |
||||
|
Output Non Unicast Counter Error
:This OID when set indicates the output Bits counter value is invalid on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.12.4.1.184.1.3 |
||||
|
Output Non Unicast Counter Overload
:This OID when set indicates an output Bits counter overload on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.50.12.4.1.184.1.4 |