EKINOPS-MGNT2-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
13
Rows
13
Columns
85
.1.3.6.1.4.1.20044.7.1.1.1 · 1 row entry · 13 columns
Uses the ekinops variant from /opt/observium/mibs/ekinops.
Command help
Walk mgnt2GigmManagerIpAddressTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-MGNT2-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-MGNT2-MIB::mgnt2GigmManagerIpAddressTable'
Manager IP address Table.
mgnt2GigmManagerIpAddressEntry row .1.3.6.1.4.1.20044.7.1.1.1.1
Column Syntax OID
Index of the IP address of the manager
Integer32r/w
Constraints:
range: 1-32
.1.3.6.1.4.1.20044.7.1.1.1.1.1
IP address of the manager:This OID defines the IP
address of the SNMP Manager attached to the Mgnt2
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.20044.7.1.1.1.1.2
The status of this row.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.20044.7.1.1.1.1.3
Manager UDP port.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20044.7.1.1.1.1.4
Enabling trap of Ctrl.
EKINOPS-MIBEkiOnOffr/w
Type Values:
1off
2on
.1.3.6.1.4.1.20044.7.1.1.1.1.5
Enabling trap of config.
EKINOPS-MIBEkiOnOffr/w
Type Values:
1off
2on
.1.3.6.1.4.1.20044.7.1.1.1.1.6
Enabling trap of event.
EKINOPS-MIBEkiOnOffr/w
Type Values:
1off
2on
.1.3.6.1.4.1.20044.7.1.1.1.1.7
Enabling trap of crit alarm.
EKINOPS-MIBEkiOnOffr/w
Type Values:
1off
2on
.1.3.6.1.4.1.20044.7.1.1.1.1.8
Enabling trap of major alarm.
EKINOPS-MIBEkiOnOffr/w
Type Values:
1off
2on
.1.3.6.1.4.1.20044.7.1.1.1.1.9
Enabling trap of minor alarm.
EKINOPS-MIBEkiOnOffr/w
Type Values:
1off
2on
.1.3.6.1.4.1.20044.7.1.1.1.1.10
Time-out for manager activities.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20044.7.1.1.1.1.11
Enabling trap of warning alarm.
EKINOPS-MIBEkiOnOffr/w
Type Values:
1off
2on
.1.3.6.1.4.1.20044.7.1.1.1.1.12
Enabling trap of indeterminate alarm.
EKINOPS-MIBEkiOnOffr/w
Type Values:
1off
2on
.1.3.6.1.4.1.20044.7.1.1.1.1.13
.1.3.6.1.4.1.20044.7.1.1.5 · 1 row entry · 3 columns
Uses the ekinops variant from /opt/observium/mibs/ekinops.
Command help
Walk mgnt2GigmGatewayAddressTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-MGNT2-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-MGNT2-MIB::mgnt2GigmGatewayAddressTable'
Gateway IP address Table: This table contains all
the gateway IP addresses.
mgnt2GigmGatewayAddressEntry row .1.3.6.1.4.1.20044.7.1.1.5.1
Column Syntax OID
Index of the IP address of the gateway
Integer32r/w
Constraints:
range: 0-1
.1.3.6.1.4.1.20044.7.1.1.5.1.1
IP address of the gateway :This OID defines the IP
address of the gateway attached to the Chassis
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.20044.7.1.1.5.1.2
Gateway priority: This OID defines the priority of
the gateway (lower number for higher priority)
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20044.7.1.1.5.1.3
.1.3.6.1.4.1.20044.7.1.2.1 · 1 row entry · 10 columns
Uses the ekinops variant from /opt/observium/mibs/ekinops.
Command help
Walk mgnt2GigmBoardTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-MGNT2-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-MGNT2-MIB::mgnt2GigmBoardTable'
List of PMs plugged in the Chassis
mgnt2GigmBoardEntry row .1.3.6.1.4.1.20044.7.1.2.1.1
Row Definition for the PMs table
Column Syntax OID
Index for PMs table
Integer32
Constraints:
range: 1-32
.1.3.6.1.4.1.20044.7.1.2.1.1.1
PM Slot number:This OID gives the slot number in
which the PM is plugged
Integer32
Constraints:
range: 1-32
.1.3.6.1.4.1.20044.7.1.2.1.1.2
PM name:This OID gives the name of the PM plugged
in the Mgnt2
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20044.7.1.2.1.1.3
Number of Client Ports:This OID gives the number of
client ports on the PM plugged in the Mgnt2
Integer32
Constraints:
range: 1-32
.1.3.6.1.4.1.20044.7.1.2.1.1.4
Number of Line Ports:This OID gives the number of line
ports on the PM plugged in the Mgnt2
Integer32
Constraints:
range: 1-32
.1.3.6.1.4.1.20044.7.1.2.1.1.5
Number of Groups:This OID gives the number of group
of clients on the PM plugged in the Mgnt2
Integer32
Constraints:
range: 1-32
.1.3.6.1.4.1.20044.7.1.2.1.1.6
root oid of the inventory leaf of the corresponding PM
ObjectIdentifier .1.3.6.1.4.1.20044.7.1.2.1.1.7
PM Slot occupied:This OID gives the slots taken
by this PM
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20044.7.1.2.1.1.8
Sub Function Label: This OID gives the name of the sub
function embedded on the Chassis. (applied only on the
100G Chassis)
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20044.7.1.2.1.1.9
Slot Status: This OID gives the status of the slot
in the Chassis: See Textual COnvention
Mgnt2SlotStatus
Type Values:
0slotEmpty
1pmReady
2pmReset
3pmLoad
4pmPassive
5pmUnknown
6pmNotReady
.1.3.6.1.4.1.20044.7.1.2.1.1.10

mgnt2GigmMibsTable

table obsolete
.1.3.6.1.4.1.20044.7.1.4 · 1 row entry · 3 columns
Uses the ekinops variant from /opt/observium/mibs/ekinops.
Command help
Walk mgnt2GigmMibsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-MGNT2-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-MGNT2-MIB::mgnt2GigmMibsTable'
List of MIBs supported by the Chassis SNMPAgent
mgnt2GigmMibsEntry row .1.3.6.1.4.1.20044.7.1.4.1
Row definition for MIBs table
Indexes
Column Syntax OID
Index for MIBs table
Integer32
Constraints:
range: 1-100
.1.3.6.1.4.1.20044.7.1.4.1.1
mgnt2MibNameobsolete
MIB name:This OID gives the name of the MIBs
supported by the SNMP Agent
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20044.7.1.4.1.2
MIB Part Number:This OID gives the part number of the MIBs
supported by the SNMP Agent
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20044.7.1.4.1.3

mgnt2DwlUploadingTable

table deprecated
.1.3.6.1.4.1.20044.7.4.1 · 1 row entry · 6 columns
Uses the ekinops variant from /opt/observium/mibs/ekinops.
Command help
Walk mgnt2DwlUploadingTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-MGNT2-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-MGNT2-MIB::mgnt2DwlUploadingTable'
SNMP Agent SW packages in ram: List of the SNMP
agent software packages available in /ram for
download on the Chassis managment module flash
mgnt2DwlUploadingEntry row .1.3.6.1.4.1.20044.7.4.1.1
Row definition for the package uploading table
Column Syntax OID
Index for uploading table
Integer32
Constraints:
range: 0-4
.1.3.6.1.4.1.20044.7.4.1.1.1
Package filename in RAM:This OID gives the name of
the SNMP agent software packages in RAM
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20044.7.4.1.1.2
Immediat Agent Replacement:This OID indicates to
switch to selected SNMP agent immediately or after
reset of the MGNT2
EKINOPS-MIBEkiStater/w
Type Values:
1disabled
2enabled
.1.3.6.1.4.1.20044.7.4.1.1.3
mgnt2FileUploaddeprecated
Agent File Upload:This OID validates the upload of
the SNMP agent from RAM to FLASH
EKINOPS-MIBEkiOnOffr/w
Type Values:
1off
2on
.1.3.6.1.4.1.20044.7.4.1.1.4
Delete Package from RAM:This OID requests to delete
the SNMP Agent SW package from RAM
EKINOPS-MIBEkiOnOffr/w
Type Values:
1off
2on
.1.3.6.1.4.1.20044.7.4.1.1.5
Flashing in Progress:This OID indicates whether there
is a file upload to FLASH in progress
EKINOPS-MIBEkiOnOff
Type Values:
1off
2on
.1.3.6.1.4.1.20044.7.4.1.1.6

mgnt2DwlPackageTable

table deprecated
.1.3.6.1.4.1.20044.7.4.2 · 1 row entry · 7 columns
Uses the ekinops variant from /opt/observium/mibs/ekinops.
Command help
Walk mgnt2DwlPackageTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-MGNT2-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-MGNT2-MIB::mgnt2DwlPackageTable'
List of SNMP agent software packages 
present in flash memory
mgnt2DwlPackageEntry row .1.3.6.1.4.1.20044.7.4.2.1
Row definition for the package management table
Column Syntax OID
Index for package management table
Integer32
Constraints:
range: 0-4
.1.3.6.1.4.1.20044.7.4.2.1.1
Package File name in FLASH:This OID gives the name
of the SNMP agent software package in FLASH
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20044.7.4.2.1.2
Extracted SNMP agent software pack.: Indicates
whether the package is currently extracted in the FLASH.
If it is, it must not be deleted
EKINOPS-MIBEkiOnOff
Type Values:
1off
2on
.1.3.6.1.4.1.20044.7.4.2.1.3
mgnt2SwitchTodeprecated
Switch to package:This OID activates the SNMP Agent
Software package
EKINOPS-MIBEkiOnOffr/w
Type Values:
1off
2on
.1.3.6.1.4.1.20044.7.4.2.1.4
mgnt2Immediatedeprecated
Immediate SNMP agent activation: This OID indicates
whether the package is scheduled for immediate
activation or activation will take place following the
next reset
EKINOPS-MIBEkiOnOffr/w
Type Values:
1off
2on
.1.3.6.1.4.1.20044.7.4.2.1.5
Delete package from FLASH:This OID deletes the SNMP
agent software package from the FLASH
EKINOPS-MIBEkiOnOffr/w
Type Values:
1off
2on
.1.3.6.1.4.1.20044.7.4.2.1.6
Package extraction in progress:This OID indicates that
a SNMP agent software activation is in progress
EKINOPS-MIBEkiOnOff
Type Values:
1off
2on
.1.3.6.1.4.1.20044.7.4.2.1.7

mgnt2LoadPMTable

table deprecated
.1.3.6.1.4.1.20044.7.4.4 · 1 row entry · 11 columns
Uses the ekinops variant from /opt/observium/mibs/ekinops.
Command help
Walk mgnt2LoadPMTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-MGNT2-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-MGNT2-MIB::mgnt2LoadPMTable'
List of the PM module software files (GW/SW)
present on the repository
mgnt2LoadPMEntry row .1.3.6.1.4.1.20044.7.4.4.1
Row definition for the LOAD article table
Column Syntax OID
Index for Load article table
Integer32
Constraints:
range: 0-32
.1.3.6.1.4.1.20044.7.4.4.1.1
PM Upgrade filename:This OID gives the name of
the file
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20044.7.4.4.1.2
PM upgrade file type:This OID gives the type of
file (gateware or software)
EKINOPS-MIBEkiLoadGWSW
Type Values:
1gW
2sW
.1.3.6.1.4.1.20044.7.4.4.1.3
mgnt2LoadStatedeprecated
PM upgrade status:This OID gives the status of the
selected Load file
EKINOPS-MIBEkiLoadState
Type Values:
1idle
2downloading
.1.3.6.1.4.1.20044.7.4.4.1.4
PM ugprade target:This OID defines the slot number
of the PM to upgrade
Integer32r/w
Constraints:
range: 1-8
.1.3.6.1.4.1.20044.7.4.4.1.5
PM upgrade reset method:This OID defines the reset
method (manual, immediate or scheduled)
EKINOPS-MIBEkiLoadPermutMethodr/w
Type Values:
0manual
1autoImmediate
2autoScheduled
.1.3.6.1.4.1.20044.7.4.4.1.6
PM upgrade reset mode:This OID defines the type of
reset (cold or warm)
EKINOPS-MIBEkiLoadPermutModer/w
Type Values:
0coldReset
1warmReset
.1.3.6.1.4.1.20044.7.4.4.1.7
PM upgrade bank number:This OID defines the target
bank number in the PM's flash
Integer32r/w
Constraints:
range: 0-4
.1.3.6.1.4.1.20044.7.4.4.1.8
PM upgrade progress:This OID gives the upgrade
progress (percentage)
Integer32
Constraints:
range: 0-100
.1.3.6.1.4.1.20044.7.4.4.1.9
PM upgrade transfer:This OID launchs the transfer
of the associated file to the selected PM's flash
EKINOPS-MIBEkiOnOffr/w
Type Values:
1off
2on
.1.3.6.1.4.1.20044.7.4.4.1.10
mgnt2LoadDeletedeprecated
PM upgrade delete file:This OID deletes the
associated file from the RAM of the management board
EKINOPS-MIBEkiOnOffr/w
Type Values:
1off
2on
.1.3.6.1.4.1.20044.7.4.4.1.11

mgnt2DwlEkicraftPkgTable

table deprecated
.1.3.6.1.4.1.20044.7.4.6 · 1 row entry · 7 columns
Uses the ekinops variant from /opt/observium/mibs/ekinops.
Command help
Walk mgnt2DwlEkicraftPkgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-MGNT2-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-MGNT2-MIB::mgnt2DwlEkicraftPkgTable'
List of Ekicraft software packages 
present in flash memory
mgnt2DwlEkicraftPkgEntry row .1.3.6.1.4.1.20044.7.4.6.1
Row definition for the package management table
Column Syntax OID
Index for Ekicraft package management table
Integer32
Constraints:
range: 0-4
.1.3.6.1.4.1.20044.7.4.6.1.1
Package File name in FLASH:This OID gives the name
of the Ekicraft software package in FLASH
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20044.7.4.6.1.2
Extracted Ekicraft software pack.: Indicates
whether the package is currently extracted in the FLASH.
If it is, it must not be deleted
EKINOPS-MIBEkiOnOff
Type Values:
1off
2on
.1.3.6.1.4.1.20044.7.4.6.1.3
Switch to package:This OID activates the Ekicraft
Software package
EKINOPS-MIBEkiOnOffr/w
Type Values:
1off
2on
.1.3.6.1.4.1.20044.7.4.6.1.4
Immediate Ekicraft activation: This OID indicates
whether the package is scheduled for immediate
activation or activation will take place following the
next reset
EKINOPS-MIBEkiOnOffr/w
Type Values:
1off
2on
.1.3.6.1.4.1.20044.7.4.6.1.5
Delete package from FLASH:This OID deletes the Ekicraft
software package from the FLASH
EKINOPS-MIBEkiOnOffr/w
Type Values:
1off
2on
.1.3.6.1.4.1.20044.7.4.6.1.6
Package extraction in progress:This OID indicates that
an Ekicraft activation is in progress
EKINOPS-MIBEkiOnOff
Type Values:
1off
2on
.1.3.6.1.4.1.20044.7.4.6.1.7
.1.3.6.1.4.1.20044.7.5.1 · 1 row entry · 5 columns
Uses the ekinops variant from /opt/observium/mibs/ekinops.
Command help
Walk mgnt2CnfUploadConfigFilesTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-MGNT2-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-MGNT2-MIB::mgnt2CnfUploadConfigFilesTable'
List of configuration files uploaded to RAM
mgnt2CnfUploadConfigFilesEntry row .1.3.6.1.4.1.20044.7.5.1.1
Row definition for the package uploading table
Column Syntax OID
Index of config files
Integer32
Constraints:
range: 0-16
.1.3.6.1.4.1.20044.7.5.1.1.1
Configuration filename in RAM:This OID gives the
name of the configuration file in RAM
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20044.7.5.1.1.2
Configuration target:This OID defines the target
slot number for the configuration file
Integer32r/w
Constraints:
range: 0-3
.1.3.6.1.4.1.20044.7.5.1.1.3
Configuration Upload:This OID uploads the
configuration file to the specified slot number
in the PM FLASH
EKINOPS-MIBEkiOnOffr/w
Type Values:
1off
2on
.1.3.6.1.4.1.20044.7.5.1.1.4
Configuration delete from RAM:This OID deletes the
configuration file from RAM
EKINOPS-MIBEkiOnOffr/w
Type Values:
1off
2on
.1.3.6.1.4.1.20044.7.5.1.1.5
.1.3.6.1.4.1.20044.7.5.2 · 1 row entry · 8 columns
Uses the ekinops variant from /opt/observium/mibs/ekinops.
Command help
Walk mgnt2CnfManageConfigFilesTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-MGNT2-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-MGNT2-MIB::mgnt2CnfManageConfigFilesTable'
List of configuration files uploaded to RAM
mgnt2CnfManageConfigFilesEntry row .1.3.6.1.4.1.20044.7.5.2.1
Row definition for the package uploading table
Column Syntax OID
Index of config file slots
Integer32
Constraints:
range: 0-16
.1.3.6.1.4.1.20044.7.5.2.1.1
Configuration file ID in FLASH:This OID gives the
ID of the configuration file in MGNT2 FLASH
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20044.7.5.2.1.2
Configuration file name in FLASH:This OID gives the
name of the configuration file in MGNT2 FLASH
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20044.7.5.2.1.3
Configuration target:This OID defines the target
module slot number for the configuration file
Integer32r/w
Constraints:
range: 3-6
.1.3.6.1.4.1.20044.7.5.2.1.4
Configuration backup:This OID backups the
configuration of the specified module to the
selected file in MGNT2 FLASH
EKINOPS-MIBEkiOnOffr/w
Type Values:
1off
2on
.1.3.6.1.4.1.20044.7.5.2.1.5
Configuration Restore:This OID restores the
configuration of the specified module from the
selected file in MGNT2 FLASH
EKINOPS-MIBEkiOnOffr/w
Type Values:
1off
2on
.1.3.6.1.4.1.20044.7.5.2.1.6
Configuration Export:This OID exports the selected
file in MGNT2 FLASH to a file in RAM
EKINOPS-MIBEkiOnOffr/w
Type Values:
1off
2on
.1.3.6.1.4.1.20044.7.5.2.1.7
Configuration delete from FLASH:This OID deletes the
configuration file from the MGNT2 FLASH
EKINOPS-MIBEkiOnOffr/w
Type Values:
1off
2on
.1.3.6.1.4.1.20044.7.5.2.1.8
.1.3.6.1.4.1.20044.7.6.7 · 1 row entry · 4 columns
Uses the ekinops variant from /opt/observium/mibs/ekinops.
Command help
Walk mgnt2GigmPlugInTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-MGNT2-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-MGNT2-MIB::mgnt2GigmPlugInTable'
List of Plug-ins present
mgnt2GigmPlugInEntry row .1.3.6.1.4.1.20044.7.6.7.1
Row Definition for the Plug-ins table
Column Syntax OID
Index for PMs table
Integer32
Constraints:
range: 1-32
.1.3.6.1.4.1.20044.7.6.7.1.1
Plug-in RI:This OID gives the remote inventory of the plug-in
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20044.7.6.7.1.2
Polling present:This OID gives the presence of the polling plug-in
EkiPlugInState
Type Values:
0absent
1loaded
2versionError
3symbolError
.1.3.6.1.4.1.20044.7.6.7.1.3
Snmp present:This OID gives the presence of the snmp plug-in
EkiPlugInState
Type Values:
0absent
1loaded
2versionError
3symbolError
.1.3.6.1.4.1.20044.7.6.7.1.4
.1.3.6.1.4.1.20044.7.7.1 · 1 row entry · 3 columns
Uses the ekinops variant from /opt/observium/mibs/ekinops.
Command help
Walk mgnt2GigmErrorCounterTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-MGNT2-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-MGNT2-MIB::mgnt2GigmErrorCounterTable'
List of error counters
mgnt2GigmErrorCounterEntry row .1.3.6.1.4.1.20044.7.7.1.1
Row Definition for the error counters table
Column Syntax OID
Index for error counters table
Integer32
Constraints:
range: 1-32
.1.3.6.1.4.1.20044.7.7.1.1.1
Slot number:This OID gives the slot number for the corresponding counter
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20044.7.7.1.1.2
Count value:This OID gives the value of the error counter
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.20044.7.7.1.1.3
.1.3.6.1.4.1.20044.7.8.1 · 1 row entry · 5 columns
Uses the ekinops variant from /opt/observium/mibs/ekinops.
Command help
Walk mgnt2PerfCapabilityTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-MGNT2-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-MGNT2-MIB::mgnt2PerfCapabilityTable'
List of Perf capability of PMs plugged in the Chassis
mgnt2PerfCapabilityEntry row .1.3.6.1.4.1.20044.7.8.1.1
Row Definition for the Perf capability table
Column Syntax OID
Index for Perf cap table
Integer32
Constraints:
range: 1-32
.1.3.6.1.4.1.20044.7.8.1.1.1
PM Slot number:This OID gives the slot number in
which the PM is plugged
Integer32
Constraints:
range: 1-32
.1.3.6.1.4.1.20044.7.8.1.1.2
PM name:This OID gives the name of the PM plugged
in the Mgnt2
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.20044.7.8.1.1.3
Status of the perf cap:This OID gives the capability
of the pm to do performance
EKINOPS-MIBEkiOnOff
Type Values:
1off
2on
.1.3.6.1.4.1.20044.7.8.1.1.4
OID of the object perf enable:This OID gives the OID of
the perf enable object of the correspondind mib of the module
ObjectIdentifier .1.3.6.1.4.1.20044.7.8.1.1.5