EGRESSACL-MIB Table View

This table contains egress ACL mask Ethernet information.
The access profile will be created on the switch to define which
part of each outgoing frame's layer 2 header will be examined
by the switch. Masks entered will be combined with the
values the switch finds in the specified frame header fields.

swEgressACLEthernetEntry row .1.3.6.1.4.1.171.12.89.2.1.1

A list of information about the egress ACL for Ethernet.

Indexes

swEgressACLEthernetProfileID

Column	Syntax	OID
swEgressACLEthernetProfileID The ID of the egress ACL mask entry unique to the mask list. The maximum value of this object depends on the device.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.171.12.89.2.1.1.1
swEgressACLEthernetRowStatus This object indicates the status of this entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.171.12.89.2.1.1.2
swEgressACLEthernetProfileName The name of the egress ACL mask entry unique to the mask list.	OctetStringr/w Constraints: range: 1-32	.1.3.6.1.4.1.171.12.89.2.1.1.3
swEgressACLEthernetUsevlan Specifies that the switch will examine the VLAN part of each packet header.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.171.12.89.2.1.1.4
swEgressACLEthernetVlanMask The mask used for the VLAN ID. Valid values are from 0x0000 to 0x0FFF. The default value is 0x0FFF	OctetStringr/w Constraints: range: 2-2	.1.3.6.1.4.1.171.12.89.2.1.1.5
swEgressACLEthernetUse8021p Specifies if the switch will examine the 802.1p priority value in the frame's header or not.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.171.12.89.2.1.1.6
swEgressACLEthernetUseEthernetType Specifies if the switch will examine the Ethernet type value in each frame's header or not.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.171.12.89.2.1.1.7
swEgressACLEthernetMacAddrMaskState This object indicates the status of the MAC address mask. other (1) - Neither source MAC address nor destination MAC address is masked. dst-mac-addr (2) - Destination MAC addresses within received frames are to be f…	Enumerationr/w Enumerated Values: 1 other 2 dst-mac-addr 3 src-mac-addr 4 dst-src-mac-addr	.1.3.6.1.4.1.171.12.89.2.1.1.8
swEgressACLEthernetSrcMacAddrMask This object specifies the MAC address mask for the source MAC address.	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.171.12.89.2.1.1.9
swEgressACLEthernetDstMacAddrMask This object specifies the MAC address mask for the destination MAC address.	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.171.12.89.2.1.1.10
swEgressACLEthernetUnusedRuleEntries The number of unused rule entries of this Ethernet profile entry.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.171.12.89.2.1.1.11

This table contains the egress ACL mask for IP information.
Access profiles will be created on the switch to define which
part of the outgoing frame's IP layer packet header will be
examined by the switch. Masks entered will be combined
with the values the switch finds in the specified frame
header fields.

swEgressACLIpEntry row .1.3.6.1.4.1.171.12.89.2.2.1

A list of information about the egress ACL of the IP layer.

Indexes

swEgressACLIpProfileID

Column	Syntax	OID
swEgressACLIpProfileID The ID of the egress ACL mask entry, which is unique to the mask list. The maximum value of this object depends on the device.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.171.12.89.2.2.1.1
swEgressACLIpRowStatus This object indicates the status of this entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.171.12.89.2.2.1.2
swEgressACLIpProfileName The name of the egress ACL mask entry unique to the mask list.	OctetStringr/w Constraints: range: 1-32	.1.3.6.1.4.1.171.12.89.2.2.1.3
swEgressACLIpUsevlan This object indicates if the IP layer VLAN part is examined or not.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.171.12.89.2.2.1.4
swEgressACLIpVlanMask The mask used for the VLAN ID. Valid values are from 0x0000 to 0x0FFF. The default value is 0x0FFF.	OctetStringr/w Constraints: range: 2-2	.1.3.6.1.4.1.171.12.89.2.2.1.5
swEgressACLIpIpAddrMaskState This object indicates the status of IP address mask. other (1) - Neither source IP address nor destination IP address is masked. dst-ip-addr (2) - Destination IP addresses within received frames are…	Enumerationr/w Enumerated Values: 1 other 2 dst-ip-addr 3 src-ip-addr 4 dst-src-ip-addr	.1.3.6.1.4.1.171.12.89.2.2.1.6
swEgressACLIpSrcIpAddrMask This object specifies the IP address mask for the source IP address.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.171.12.89.2.2.1.7
swEgressACLIpDstIpAddrMask This object specifies the IP address mask for the destination IP address.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.171.12.89.2.2.1.8
swEgressACLIpUseDSCP This object indicates if the DSCP protocol in the packet header is to be examined or not.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.171.12.89.2.2.1.9
swEgressACLIpUseProtoType That object indicates which protocol will be examined.	Enumerationr/w Enumerated Values: 1 none 2 icmp 3 igmp 4 tcp 5 udp 6 protocolId	.1.3.6.1.4.1.171.12.89.2.2.1.10
swEgressACLIpIcmpOption This object indicates which fields are defined for ICMP. none (1)- Both fields are null. type (2)- Type field identified. code (3)- Code field identified. type-code (4)- Both ICMP fields identified.	Enumerationr/w Enumerated Values: 1 none 2 type 3 code 4 type-code	.1.3.6.1.4.1.171.12.89.2.2.1.11
swEgressACLIpIgmpOption Indicates if the IGMP options field is identified or not.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.171.12.89.2.2.1.12
swEgressACLIpTcpOption This object indicates the status of the filtered address of TCP. other (1) - Neither source port nor destination port is masked. dst-addr (2) - Packets will be filtered if this destination port is i…	Enumerationr/w Enumerated Values: 1 other 2 dst-addr 3 src-addr 4 dst-src-addr	.1.3.6.1.4.1.171.12.89.2.2.1.13
swEgressACLIpUdpOption This object indicates the status of the filtered address of UDP . other (1) - Neither source port nor destination port is masked. dst-addr (2) - Packets will be filtered if this destination port is …	Enumerationr/w Enumerated Values: 1 other 2 dst-addr 3 src-addr 4 dst-src-addr	.1.3.6.1.4.1.171.12.89.2.2.1.14
swEgressACLIpTCPorUDPSrcPortMask Specifies a TCP port mask for the source port if swEgressACLIpUseProtoType is TCP Specifies a UDP port mask for the source port if swEgressACLIpUseProtoType is UDP.	OctetStringr/w Constraints: range: 2-2	.1.3.6.1.4.1.171.12.89.2.2.1.15
swEgressACLIpTCPorUDPDstPortMask Specifies a TCP port mask for the destination port if swEgressACLIpUseProtoType is TCP Specifies a UDP port mask for the destination port if swEgressACLIpUseProtoType is UDP.	OctetStringr/w Constraints: range: 2-2	.1.3.6.1.4.1.171.12.89.2.2.1.16
swEgressACLIpTCPFlagBit Specifies a TCP connection flag mask.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.171.12.89.2.2.1.17
swEgressACLIpTCPFlagBitMask A value which indicates the set of TCP flags that this entity may potentially offer. The value is a sum of flag bits. This sum initially takes the value zero. Then, for each flag, L, is added in the range 1 through 6, f…	Integer32r/w Constraints: range: 0-63	.1.3.6.1.4.1.171.12.89.2.2.1.18
swEgressACLIpProtoIDOption Specifies if the switch will examine each frame's protocol ID field or not.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.171.12.89.2.2.1.19
swEgressACLIpProtoID Specifies that the rule applies to the IP protocol ID behind the IP header.	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.171.12.89.2.2.1.20
swEgressACLIpProtoIDMask Specifies that the rule applies to the IP protocol ID and the mask options behind the IP header.	OctetStringr/w Constraints: range: 4-4	.1.3.6.1.4.1.171.12.89.2.2.1.21
swEgressACLIpUnusedRuleEntries The number of unused rule entries this IP profile entry.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.171.12.89.2.2.1.22

This table contains IPv6 egress ACL mask information.
An access profile will be created on the switch to define which
parts of each outgoing frame's IPv6 part of the packet header will
be examined by the switch. Masks entered will be combined
with the values the switch finds in the specified frame header fields.

swEgressACLIpv6MaskEntry row .1.3.6.1.4.1.171.12.89.2.3.1

A list of information about egress ACL for IPv6.

Indexes

swEgressACLIpv6MaskProfileID

Column	Syntax	OID
swEgressACLIpv6MaskProfileID The ID of the egress ACL mask entry, which is unique to the mask list. The maximum value of this object depends on the device.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.171.12.89.2.3.1.1
swEgressACLIpv6MaskRowStatus This object indicates the status of this entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.171.12.89.2.3.1.2
swEgressACLIpv6MaskProfileName The name of egress ACL mask entry unique to the mask list.	OctetStringr/w Constraints: range: 1-32	.1.3.6.1.4.1.171.12.89.2.3.1.3
swEgressACLIpv6MaskClass This object indicates if the class field in the IPv6 packet header is to be examined or not.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.171.12.89.2.3.1.4
swEgressACLIpv6IpAddrMaskState This object indicates the status of the IPv6 address mask. other (1) - Neither source IPv6 address nor destination IPv6 address is masked. dst-ipv6-addr (2) - Received frame destination IPv6 address i…	Enumerationr/w Enumerated Values: 1 other 2 dst-ipv6-addr 3 src-ipv6-addr 4 dst-src-ipv6-addr	.1.3.6.1.4.1.171.12.89.2.3.1.5
swEgressACLIpv6MaskSrcIpv6Mask This object specifies the IPv6 address mask for the source IPv6 address.	IPV6-TCIpv6Addressr/w Type Constraints: range: 16	.1.3.6.1.4.1.171.12.89.2.3.1.6
swEgressACLIpv6MaskDstIpv6Mask This object specifies the IPv6 address mask for the destination IPv6 address.	IPV6-TCIpv6Addressr/w Type Constraints: range: 16	.1.3.6.1.4.1.171.12.89.2.3.1.7
swEgressACLIpv6MaskUseProtoType That object indicates which protocol will be examined.	Enumerationr/w Enumerated Values: 1 none 2 tcp 3 udp 4 icmp	.1.3.6.1.4.1.171.12.89.2.3.1.8
swEgressACLIpv6MaskIcmpOption This object indicates which fields are defined for ICMP. none (1)- Both fields are null. type (2)- Type field identified. code (3)- Code field identified. type-code (4)- Both ICMP fields identified.	Enumerationr/w Enumerated Values: 1 none 2 type 3 code 4 type-code	.1.3.6.1.4.1.171.12.89.2.3.1.9
swEgressACLIpv6MaskTcpOption This object indicates the status of the filtered address of TCP. other (1) - Neither source port nor destination port is masked. dst-addr (2) - Packets will be filtered if this destination port is i…	Enumerationr/w Enumerated Values: 1 other 2 dst-addr 3 src-addr 4 dst-src-addr	.1.3.6.1.4.1.171.12.89.2.3.1.10
swEgressACLIpv6MaskUdpOption This object indicates the status of the filtered address of UDP. other (1) - Neither source port nor destination port is masked. dst-addr (2) - Packets will be filtered if this destination port is i…	Enumerationr/w Enumerated Values: 1 other 2 dst-addr 3 src-addr 4 dst-src-addr	.1.3.6.1.4.1.171.12.89.2.3.1.11
swEgressACLIpv6MaskTCPorUDPSrcPortMask Specifies a TCP port mask for the source port if swEgressACLIpv6MaskUseProtoType is TCP Specifies a UDP port mask for the source port if swEgressACLIpv6MaskUseProtoType is UDP.	OctetStringr/w Constraints: range: 2-2	.1.3.6.1.4.1.171.12.89.2.3.1.12
swEgressACLIpv6MaskTCPorUDPDstPortMask Specifies a TCP port mask for the destination port if swEgressACLIpv6MaskUseProtoType is TCP Specifies a UDP port mask for the destination port if swEgressACLIpv6MaskUseProtoType is UDP.	OctetStringr/w Constraints: range: 2-2	.1.3.6.1.4.1.171.12.89.2.3.1.13
swEgressACLIpv6MaskUnusedRuleEntries The number of unused rule entries of this IPv6 profile entry.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.171.12.89.2.3.1.14

This table contains Ethernet egress ACL information.

swEgressACLEtherRuleEntry row .1.3.6.1.4.1.171.12.89.3.1.1

A list of information about the egress ACL rule of the layer 2 part of each packet.

Indexes

swEgressACLEtherRuleProfileID swEgressACLEtherRuleAccessID

Column	Syntax	OID
swEgressACLEtherRuleProfileID The ID of the egress ACL rule entry, which is unique to the mask list. The maximum value of this object depends on the device.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.171.12.89.3.1.1.1
swEgressACLEtherRuleAccessID The ID of the the egress ACL rule entry relates to the swEgressACLEtherRuleProfileID. When row creation is set to 0, this indicates the access ID will be assigned automatically. When set from 1 to 65535, an access ID wi…	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.171.12.89.3.1.1.2
swEgressACLEtherRuleRowStatus This object indicates the status of this entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.171.12.89.3.1.1.3
swEgressACLEtherRuleMatchVID Specifies that the access rule will apply only to packets with this VLAN ID. It is applied to the specified ports configured by swEgressACLEtherRulePortGroup. Note:A value of 0 indicates that this object is not active.	Q-BRIDGE-MIBVlanIdOrNoner/w Type Constraints: range: 0..4094	.1.3.6.1.4.1.171.12.89.3.1.1.4
swEgressACLEtherRuleMatchVlanMask Specifies the per rule mask for the VLAN field as defined in swEgressACLEtherRuleVlan object. The value of this object when not in use is the corresponding mask in the profile mask. Once the value of this object is modi…	OctetStringr/w Constraints: range: 2-2	.1.3.6.1.4.1.171.12.89.3.1.1.5
swEgressACLEtherRuleSrcMacAddress Specifies that the access rule will apply to only packets with this source MAC address.	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.171.12.89.3.1.1.6
swEgressACLEtherRuleMaskSrcMacAddress Specifies the per rule mask for the source MAC addres field as defined in swEgressACLEtherRuleSrcMacAddress object. The value of this object when not in use is the corresponding mask in the profile mask. Once the value …	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.171.12.89.3.1.1.7
swEgressACLEtherRuleDstMacAddress Specifies that the access rule will apply to packets with this destination MAC address.	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.171.12.89.3.1.1.8
swEgressACLEtherRuleMaskDstMacAddress Specifies the per rule mask for the destination MAC addres field as defined in swEgressACLEtherRuleDstMacAddress object. The value of this object when not in use is the corresponding mask in the profile mask. Once the v…	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.171.12.89.3.1.1.9
swEgressACLEtherRule8021P Specifies that the access rule will apply to packets with this 802.1p priority value. A value of -1 indicates that this object is not active.	Integer32r/w Constraints: range: -1-7	.1.3.6.1.4.1.171.12.89.3.1.1.10
swEgressACLEtherRuleEtherType Specifies that the access rule will apply to packets with this hexadecimal 802.1Q Ethernet type value in the packet header.	OctetStringr/w Constraints: range: 2-2	.1.3.6.1.4.1.171.12.89.3.1.1.11
swEgressACLEtherRuleVID Specifies the VLAN-based ACL rule. There are two conditions: 1. this rule will apply to all the ports; 2. packets must belong to this VLAN. This object and swEgressACLEtherRulePortGroup,swEgressACLEtherRu…	Q-BRIDGE-MIBVlanIdOrNoner/w Type Constraints: range: 0..4094	.1.3.6.1.4.1.171.12.89.3.1.1.12
swEgressACLEtherRulePort Specifies that the access rule will only apply to the port. This object and swEgressACLEtherRuleVID,swEgressACLEtherRulePortGroup can not be set together. When you set swEgressACLEtherRuleVID or swEgressACLEtherRulePor…	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.171.12.89.3.1.1.13
swEgressACLEtherRulePortGroup Specifies that the access rule will only apply to port(s) which belong to this port group. This object and swEgressACLEtherRuleVID, swEgressACLEtherRulePort can not be set together.When you set swEgressACLEtherRuleVID o…	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.171.12.89.3.1.1.14
swEgressACLEtherRulePermit This object indicates if the result of the packet examination is 'permit' or 'deny'. The default is 'permit'. deny - Specifies that packets matching the access profile are not permitted to be forwarded by the swi…	Enumerationr/w Enumerated Values: 1 deny 2 permit	.1.3.6.1.4.1.171.12.89.3.1.1.15
swEgressACLEtherRuleEnableReplacePriority Specifies if the switch will change priorities of packets that match the access profile 802.1p priority tag field or not .	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.171.12.89.3.1.1.16
swEgressACLEtherRuleReplacePriority Specifies that the priority will be changed in packets while the swEgressACLEtherRuleEnablePriority is enabled.A value of -1 indicates that this object is not active.	Integer32r/w Constraints: range: -1-7	.1.3.6.1.4.1.171.12.89.3.1.1.17
swEgressACLEtherRuleEnableReplaceDscp Specifies if the switch will change priorities of packets that match the access profile DSCP field or not.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.171.12.89.3.1.1.18
swEgressACLEtherRuleReplaceDscp Specifies a value to be written to the DSCP field of an outgoing packet that meets the criteria specified in the first part of the command. This value will over-write the value in the DSCP field of the packet. A value o…	Integer32r/w Constraints: range: -1-63	.1.3.6.1.4.1.171.12.89.3.1.1.19
swEgressAclEtherRuleTimeRangeName Specifies a name of a time-range associated with a specific egress ACL entry. The time-range name must first be created before being associated with the access rule. If this name is an empty string, the time-range profi…	RFC1213-MIBDisplayStringr/w	.1.3.6.1.4.1.171.12.89.3.1.1.20

This table contains the IPv6 egress ACL rule information.

swEgressACLIpv6RuleEntry row .1.3.6.1.4.1.171.12.89.3.3.1

A list of information about egress ACL rules regarding the IPv6 part of each packet.

Indexes

swEgressACLIpv6RuleProfileID swEgressACLIpv6RuleAccessID

Column	Syntax	OID
swEgressACLIpv6RuleProfileID The ID of the egress ACL mask entry, which is unique to the mask list. The maximum value of this object depends on the device.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.171.12.89.3.3.1.1
swEgressACLIpv6RuleAccessID The ID of the the egress ACL rule entry relates to the swEgressACLEtherRuleProfileID. When row creation is set to 0, this indicates the access ID will be assigned automatically. When set from 1 to 65535, an access ID wi…	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.171.12.89.3.3.1.2
swEgressACLIpv6RuleRowStatus This object indicates the status of this entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.171.12.89.3.3.1.3
swEgressACLIpv6RuleClass Specifies that the rule applies to the IPv6 class field. A value of -1 indicates that this object is not active.	Integer32r/w Constraints: range: -1-255	.1.3.6.1.4.1.171.12.89.3.3.1.4
swEgressACLIpv6RuleSrcIpv6Addr Specifies that the rule applies to the source IPv6 address.	IPV6-TCIpv6Addressr/w Type Constraints: range: 16	.1.3.6.1.4.1.171.12.89.3.3.1.5
swEgressACLIpv6RuleMaskSrcIpv6Addr Specifies that the per rule mask of swEgressACLIpv6RuleSrcIpv6Addr. The value of this object when not in use is the corresponding mask in the profile mask. Once the value of this object is modified, the per rule mask wi…	IPV6-TCIpv6Addressr/w Type Constraints: range: 16	.1.3.6.1.4.1.171.12.89.3.3.1.6
swEgressACLIpv6RuleDstIpv6Addr Specifies that the rule applies to the destination IPv6 address.	IPV6-TCIpv6Addressr/w Type Constraints: range: 16	.1.3.6.1.4.1.171.12.89.3.3.1.7
swEgressACLIpv6RuleMaskDstIpv6Addr Specifies that the rule applies to the destination IPv6 address.	IPV6-TCIpv6Addressr/w Type Constraints: range: 16	.1.3.6.1.4.1.171.12.89.3.3.1.8
swEgressACLIpv6RuleProtocol Specifies the IPv6 protocol.	Enumerationr/w Enumerated Values: 1 none 2 tcp 3 udp 4 icmp	.1.3.6.1.4.1.171.12.89.3.3.1.9
swEgressACLIpv6RuleType Specifies that the rule applies to the value of ICMP type traffic. A value of -1 denotes that this object is not active.	Integer32r/w Constraints: range: -1-255	.1.3.6.1.4.1.171.12.89.3.3.1.10
swEgressACLIpv6RuleCode Specifies that the rule applies to the value of ICMP code traffic. A value of -1 denotes that this object is not active.	Integer32r/w Constraints: range: -1-255	.1.3.6.1.4.1.171.12.89.3.3.1.11
swEgressACLIpv6RuleSrcPort Specifies that the rule applies to the range of the TCP/UDP source ports. A value of -1 indicates that this object is not active.	Integer32r/w Constraints: range: -1-65535	.1.3.6.1.4.1.171.12.89.3.3.1.12
swEgressACLIpv6RuleMaskSrcPort Specifies that the per rule mask of swEgressACLIpv6RuleSrcPort. The value of this object when not in use is the corresponding mask in the profile mask. Once the value of this object is modified, the per rule mask will t…	OctetStringr/w Constraints: range: 2-2	.1.3.6.1.4.1.171.12.89.3.3.1.13
swEgressACLIpv6RuleDstPort Specifies the TCP/UDP destination port range. A value of -1 indicates that this object is not active.	Integer32r/w Constraints: range: -1-65535	.1.3.6.1.4.1.171.12.89.3.3.1.14
swEgressACLIpv6RuleMaskDstPort Specifies the per rule mask of swEgressACLIpv6RuleDstPort. The value of this object when not in use is the corresponding mask in the profile mask. Once the value of this object is modified, the per rule mask will take e…	OctetStringr/w Constraints: range: 2-2	.1.3.6.1.4.1.171.12.89.3.3.1.15
swEgressACLIpv6RuleVID Specifies this rule only applies to the specified VLAN. There are two conditions: 1.only the portlist that belongs to this VLAN will be included; 2.packets must belong to this VLAN. This object and swEgre…	Q-BRIDGE-MIBVlanIdOrNoner/w Type Constraints: range: 0..4094	.1.3.6.1.4.1.171.12.89.3.3.1.16
swEgressACLIpv6RulePort Specifies that the access rule will only apply to the port. This object and swEgressACLIpv6RuleVID,swEgressACLIpv6RulePortGroup can not be set together.When you set swEgressACLIpv6RuleVID or swEgressACLIpv6RulePortGroup…	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.171.12.89.3.3.1.17
swEgressACLIpv6RulePortGroup Specifies that the access rule will apply only to port(s)which belong to this port group. This object and swEgressACLIpv6RuleVID,swEgressACLIpv6RulePort can not be set together. When you set swEgressACLIpv6RuleVID or sw…	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.171.12.89.3.3.1.18
swEgressACLIpv6RulePermit This object indicates if the result of the packet examination is 'permit' or 'deny'. The default is 'permit'. deny - Specifies that packets matching the access profile are not permitted to be forwarded by…	Enumerationr/w Enumerated Values: 1 deny 2 permit	.1.3.6.1.4.1.171.12.89.3.3.1.19
swEgressACLIpv6RuleEnableReplacePriority Specifies if the switch will change priorities of packets that match the access profile 802.1p priority tag or not.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.171.12.89.3.3.1.20
swEgressACLIpv6RuleReplacePriority Specifies the priority will change in packets while the swEgressACLIpv6RuleReplacePriority is enabled.A value of -1 indicates that this object is not active.	Integer32r/w Constraints: range: -1-7	.1.3.6.1.4.1.171.12.89.3.3.1.21
swEgressACLIpv6RuleEnableReplaceDscp Specifies if the switch will change priorities of packets that match the access profile DSCP field or not.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.171.12.89.3.3.1.22
swEgressACLIpv6RuleReplaceDscp Specifies a value to be written to the DSCP field of an outgoing packet that meets the criteria specified in the first part of the command. This value will over-write the value in the DSCP field of the packet. A value o…	Integer32r/w Constraints: range: -1-63	.1.3.6.1.4.1.171.12.89.3.3.1.23
swEgressAclIpv6RuleTimeRangeName Specifies a name of a time-range associated with a specific egress ACL entry. The time-range name must first be created before being associated with the access rule. If this name is an empty string, the time-range profi…	RFC1213-MIBDisplayStringr/w	.1.3.6.1.4.1.171.12.89.3.3.1.24

This table maintains counter information associated with a specific
rule in the egress ACL rule table. Please refer to the swEgressACLEtherRuleTable,
swEgressACLIpRuleTable, swEgressACLIpv6RuleTable for detailed ACL rule information.

swEgressACLCounterEntry row .1.3.6.1.4.1.171.12.89.3.4.1

The entry maintains counter information associated with the egress ACL
rule table.

Indexes

swEgressACLCounterProfileID swEgressACLCounterAccessID

Column	Syntax	OID
swEgressACLCounterProfileID The ID of the egress ACL mask entry, which is unique in the mask list.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.171.12.89.3.4.1.1
swEgressACLCounterAccessID The ID of the egress ACL rule entry as related to the swEgressACLCounterProfileID.	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.171.12.89.3.4.1.2
swEgressACLCounterState Specifies whether the counter feature will be enabled or disabled. 1. This is optional. The default is 'disabled'. 2. If the rule is not bound with flow-meter, then all packets that match will be counted. If the rule is…	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.171.12.89.3.4.1.3
swEgressACLCounterTotalCounter The number of matched packets.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.171.12.89.3.4.1.4
swEgressACLCounterGreenCounter The number of matched green packets.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.171.12.89.3.4.1.5
swEgressACLCounterYellowCounter The number of matched yellow packets.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.171.12.89.3.4.1.6
swEgressACLCounterRedCounter The number of matched red packets.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.171.12.89.3.4.1.7

This table is used to configure the flow-based metering function.
The access rule must first be created before the parameters of this
function can be applied. Users may set the preferred bandwidth for
this rule, in Kbps; once the bandwidth has been exceeded, overflow
packets will be either dropped or set for a drop precedence,
depending on user configuration.

swEgressAclMeterEntry row .1.3.6.1.4.1.171.12.89.4.1.1

This entry displays parameters and configurations set for the flow
metering function.

Indexes

swEgressAclMeterProfileID swEgressAclMeterAccessID

Column	Syntax	OID
swEgressAclMeterProfileID The ID of the ACL mask entry is unique in the mask list. The maximum value of this object depends on the device.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.171.12.89.4.1.1.1
swEgressAclMeterAccessID The ID of the egress ACL rule entry as related to the swEgressAclMeterProfileID.	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.171.12.89.4.1.1.2
swEgressAclMeterRowStatus This object indicates the status of this entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.171.12.89.4.1.1.3
swEgressAclMeterMode tr-tcm: two rate three color mode; sr-tcm: single rate three color mode;	Enumerationr/w Enumerated Values: 1 other 2 tr-tcm 3 sr-tcm	.1.3.6.1.4.1.171.12.89.4.1.1.4
swEgressAclMeterTrtcmCir Specifies the 'committed information rate' of 'two rate three color mode'. The unit is Kbps.A value of -1 indicates that this object is not active.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.171.12.89.4.1.1.5
swEgressAclMeterTrtcmCbs Specifies the 'committed burst size' of 'two rate three color mode'. 1. The unit is Kbytes. That is to say, 1 means 1Kbytes. 2. This parameter is an optional parameter. The default value is 4kbytes. Note:The set value r…	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.171.12.89.4.1.1.6
swEgressAclMeterTrtcmPir Specifies the 'Peak Information Rate' of 'two rate three color mode'. The unit is Kbps.A value of -1 indicates that this object is not active.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.171.12.89.4.1.1.7
swEgressAclMeterTrtcmPbs Specifies the 'peak burst size' of 'two rate three color mode'. 1. The unit is Kbytes. That is to say, 1 means 1kbytes. 2. This parameter is an optional parameter. The default value is 4kbytes. Note:The set value range …	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.171.12.89.4.1.1.8
swEgressAclMeterTrtcmColorMode Specifies the meter mode. The default is color-blind mode. The final color of the packet is determined by the initial color of the packet and the metering result.	Enumerationr/w Enumerated Values: 1 color-blind 2 color-aware	.1.3.6.1.4.1.171.12.89.4.1.1.9
swEgressAclMeterTrtcmConformState Specifies the action state when packet is in 'green color'. permit: permit the packet. replace-dscp: change the DSCP value of packet.	Enumerationr/w Enumerated Values: 1 other 2 permit 3 replace-dscp	.1.3.6.1.4.1.171.12.89.4.1.1.10
swEgressAclMeterTrtcmConformReplaceDscp Specifies the DSCP value of the packet when the packet is in 'green color'. A value of -1 indicates that this object is not active.	Integer32r/w Constraints: range: -1-63	.1.3.6.1.4.1.171.12.89.4.1.1.11
swEgressAclMeterTrtcmConformCounterState Specifies the counter state when the packet is in 'green color'. 1. This is optional. The default is 'disabled'. 2. The resource may be limited so that the counter cannot be turned on. The limitation is project …	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.171.12.89.4.1.1.12
swEgressAclMeterTrtcmExceedState Specifies the action state when packet is in 'yellow color'. permit: permit the packet. replace-dscp: change the DSCP value of the packet. drop: drop the packet.	Enumerationr/w Enumerated Values: 1 other 2 permit 3 replace-dscp 4 drop	.1.3.6.1.4.1.171.12.89.4.1.1.13
swEgressAclMeterTrtcmExceedReplaceDscp Specifies the DSCP value of packet when packet is in 'yellow color'. A value of -1 indicates that this object is not active.	Integer32r/w Constraints: range: -1-63	.1.3.6.1.4.1.171.12.89.4.1.1.14
swEgressAclMeterTrtcmExceedCounterState Specifies the counter state when packet is in 'yellow color'. 1. This is optional. The default is 'disabled'. 2. The resource may be limited so that the counter cannot be turned on. The limitation is project dep…	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.171.12.89.4.1.1.15
swEgressAclMeterTrtcmViolateState Specifies the action state when packet is in 'red color'. permit: permit the packet. replace-dscp: change the DSCP value of packet. drop: drop the packet.	Enumerationr/w Enumerated Values: 1 other 2 permit 3 replace-dscp 4 drop	.1.3.6.1.4.1.171.12.89.4.1.1.16
swEgressAclMeterTrtcmViolateReplaceDscp Specifies the DSCP value of the packet when packet is in 'red color'. A value of -1 indicates that this object is not active.	Integer32r/w Constraints: range: -1-63	.1.3.6.1.4.1.171.12.89.4.1.1.17
swEgressAclMeterTrtcmViolateCounterState Specifies the counter state when packet is in 'red color'. 1. This is optional. The default is 'disabled'. 2. The resource may be limited so that the counter cannot be turned on. The limitation is project depend…	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.171.12.89.4.1.1.18
swEgressAclMeterSrtcmCir Specifies the 'committed information rate' of 'single rate three color mode'. The unit is Kbps. A value of -1 indicates that this object is not active	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.171.12.89.4.1.1.19
swEgressAclMeterSrtcmCbs Specifies the 'committed burst size' of 'single rate three color mode'. The unit is Kbytes. That is to say, 1 means 1Kbytes. The set value range is 0..N.The value N is determined by project. A value of -1 indicates that…	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.171.12.89.4.1.1.20
swEgressAclMeterSrtcmEbs Specifies the 'Excess burst size' of 'single rate three color mode'. The unit is Kbytes. That is to say, 1 means 1kbytes. The set value range is 0..N.The value N is determined by project. A value of -1 indicates that th…	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.171.12.89.4.1.1.21
swEgressAclMeterSrtcmColorMode Specifies the meter mode. The default is color-blind mode. The final color of packet is determined by the initial color of the packet and the metering result.	Enumerationr/w Enumerated Values: 1 color-blind 2 color-aware	.1.3.6.1.4.1.171.12.89.4.1.1.22
swEgressAclMeterSrtcmConformState Specifies the action state when the packet is in 'green color'. permit: permit the packet. replace-dscp: change the DSCP value of packet.	Enumerationr/w Enumerated Values: 1 other 2 permit 3 replace-dscp	.1.3.6.1.4.1.171.12.89.4.1.1.23
swEgressAclMeterSrtcmConformReplaceDscp Specifies the DSCP value of the packet when packet is in 'green color'. A value of -1 indicates that this object is not active.	Integer32r/w Constraints: range: -1-63	.1.3.6.1.4.1.171.12.89.4.1.1.24
swEgressAclMeterSrtcmConformCounterState Specifies the counter state when the packet is in 'green color'. 1. This is optional. The default is 'disabled'. 2. The resource may be limited such that counter cannot be turned on. The limitation is project de…	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.171.12.89.4.1.1.25
swEgressAclMeterSrtcmExceedState Specifies the action state when the packet is in 'yellow color'. permit: permit the packet. replace-dscp: change the DSCP value of packet. drop: drop the packet.	Enumerationr/w Enumerated Values: 1 other 2 permit 3 replace-dscp 4 drop	.1.3.6.1.4.1.171.12.89.4.1.1.26
swEgressAclMeterSrtcmExceedReplaceDscp Specifies the DSCP value of the packet when packet is in 'yellow color'. A value of -1 indicates that this object is not active.	Integer32r/w Constraints: range: -1-63	.1.3.6.1.4.1.171.12.89.4.1.1.27
swEgressAclMeterSrtcmExceedCounterState Specifies the counter state when the packet is in 'yellow color'. 1. This is optional. The default is 'disabled'. 2. The resource may be limited such that counter cannot be turned on. The limitation is project d…	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.171.12.89.4.1.1.28
swEgressAclMeterSrtcmViolateState Specifies the action state when the packet is in 'red color'. permit: permit the packet. replace-dscp: change the DSCP value of packet. drop: drop the packet.	Enumerationr/w Enumerated Values: 1 other 2 permit 3 replace-dscp 4 drop	.1.3.6.1.4.1.171.12.89.4.1.1.29
swEgressAclMeterSrtcmViolateReplaceDscp Specifies the DSCP value of the packet when packet is in 'red color'. A value of -1 indicates that this object is not active.	Integer32r/w Constraints: range: -1-63	.1.3.6.1.4.1.171.12.89.4.1.1.30
swEgressAclMeterSrtcmViolateCounterState Specifies the counter state when the packet is in 'red color'. 1. This is optional. The default is 'diabled'. 2. The resource may be limited so that the counter cannot be turned on. The limitation is project dep…	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.171.12.89.4.1.1.31

This table is used to configure the single rate two color metering function.
The egress access rule must first be created before the parameters of this
function can be applied. Users may set the preferred bandwidth for
this rule, in Kbps; once the bandwidth has been exceeded, overflow
packets will be either dropped or set for a drop precedence,
depending on user configuration.

swEgressAclRateEntry row .1.3.6.1.4.1.171.12.89.4.2.1

This entry displays parameters and configurations set for the single rate two color function.

Indexes

swEgressAclRateProfileID swEgressAclRateAccessID

Column	Syntax	OID
swEgressAclRateProfileID The ID of the egress ACL mask entry is unique in the mask list. The maximum value of this object depends on the device.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.171.12.89.4.2.1.1
swEgressAclRateAccessID The ID of the egress ACL rule entry as related to the swEgressAclRateProfileID.	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.171.12.89.4.2.1.2
swEgressAclRateRowStatus This object indicates the status of this entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.171.12.89.4.2.1.3
swEgressAclRate Specifies the committed bandwidth in Kbps for the flow. A value of -1 indicates that this object is not active. NOTE: Users must set the swEgressAclRateActionForRateExceed object to activate this entry.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.171.12.89.4.2.1.4
swEgressAclBurstSize This specifies the burst size for the single rate two color mode. The unit is Kbytes. That is to say, 1 means 1kbytes. The set value range is 0..N, the value N is determined by project. A value of -1 indicates that this…	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.171.12.89.4.2.1.5
swEgressAclRateActionForRateExceed Specifies the action to take for those packets exceeding the committed rate. drop-packet: drop the packet. replace-dscp: change the DSCP value of the packet. NOTE: Users must set the swEgressAclRate to activate this…	Enumerationr/w Enumerated Values: 1 other 2 drop-packet 3 remark-dscp	.1.3.6.1.4.1.171.12.89.4.2.1.6
swEgressAclRateRemarkDscp Mark the packet with a specified DSCP. It can be set when swEgressAclRateActionForRateExceed sets remark-dscp(3). A value of -1 indicates that this object is not active.	Integer32r/w Constraints: range: -1-63	.1.3.6.1.4.1.171.12.89.4.2.1.7