EDS-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
42
Rows
42
Columns
402

dTrapTable

table
.1.3.6.1.4.1.31440.2.1 · 1 row entry · 4 columns
Open in standard view
Uses the eds variant from /opt/observium/mibs/eds.
Command help
Walk dTrapTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EDS-MIB' -M '/opt/observium/mibs/eds:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EDS-MIB::dTrapTable' 
Trap table
dTrapEntry row .1.3.6.1.4.1.31440.2.1.1
Trap row
Indexes
Column Syntax OID
dTrapIndex
Index of table.
Integer32
Constraints:
range: 1-127
 .1.3.6.1.4.1.31440.2.1.1.1
dTrapEnable
Zero disables the trap, one enables it.
Integer32r/w
Constraints:
range: 0-1
 .1.3.6.1.4.1.31440.2.1.1.2
dTrapIP
Address to send trap to.
RFC1155-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.31440.2.1.1.3
dTrapCommunity
Community string to send with trap message.
RFC1213-MIBDisplayStringr/w .1.3.6.1.4.1.31440.2.1.1.4

dTrapDeviceTable

table
.1.3.6.1.4.1.31440.2.2 · 1 row entry · 8 columns
Open in standard view
Uses the eds variant from /opt/observium/mibs/eds.
Command help
Walk dTrapDeviceTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EDS-MIB' -M '/opt/observium/mibs/eds:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EDS-MIB::dTrapDeviceTable' 
Trap device table
dTrapDeviceEntry row .1.3.6.1.4.1.31440.2.2.1
Trap row
Indexes
Column Syntax OID
dTrapDeviceIndex
Index of table. Traps are sent with this OID followed by the index
number of the table entry that generated the trap. For example, if
the values at index 5 of this table generated a trap, the name of the
trap would be .…
Integer32
Constraints:
range: 1-127
 .1.3.6.1.4.1.31440.2.2.1.1
dTrapDeviceEnable
Zero disables the trap, one enables it.
Integer32r/w
Constraints:
range: 0-1
 .1.3.6.1.4.1.31440.2.2.1.2
dTrapDeviceSendPointer
Indicates which entry in the Trap Table to use to determine where
to send the trap. The Trap Table contains the destination IP address.
Integer32r/w
Constraints:
range: 0-1
 .1.3.6.1.4.1.31440.2.2.1.3
dTrapDeviceROM
Device ROM code to base sending trap message on.
OctetStringr/w
Constraints:
range: 16-16
 .1.3.6.1.4.1.31440.2.2.1.4
dTrapDeviceVariable
Number of the variable to reference, as listed in the Devices section
of this MIB. For example, the DS2406 has 9 items, which would be numbered 0 - 8.
So if dTrapDeviceVariable were set to 0 it would refer to owDS2406PI…
Integer32r/w
Constraints:
range: 0-99
 .1.3.6.1.4.1.31440.2.2.1.5
dTrapDeviceHighThreshold
A trap will be generated when the variable is greater than this value or
it is less than or equal to this value - dTrapDeviceHysteresis. This number
may be positive or negative and may contain a decimal point.
RFC1213-MIBDisplayStringr/w .1.3.6.1.4.1.31440.2.2.1.6
dTrapDeviceLowThreshold
A trap will be generated when the variable is less than this value or
it is greater than or equal to this value + dTrapDeviceHysteresis. This number
may be positive or negative and may contain a decimal point.
RFC1213-MIBDisplayStringr/w .1.3.6.1.4.1.31440.2.2.1.7
dTrapDeviceHysteresis
This value is used to limit repeated trap sends due to a value hovering around
a threshold. If it is not used it should be set to zero. This number may be positive
or negative and may contain a decimal point.
RFC1213-MIBDisplayStringr/w .1.3.6.1.4.1.31440.2.2.1.8

wTrapTable

table
.1.3.6.1.4.1.31440.3.1 · 1 row entry · 7 columns
Open in standard view
Uses the eds variant from /opt/observium/mibs/eds.
Command help
Walk wTrapTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EDS-MIB' -M '/opt/observium/mibs/eds:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EDS-MIB::wTrapTable' 
Wireless device trap table
wTrapEntry row .1.3.6.1.4.1.31440.3.1.1
Entry
Indexes
Column Syntax OID
wTrapIndex
Index of table. Traps are sent with this OID followed by the index
number of the table entry that generated the trap. An integer value is sent with the
trap which indicates what state change caused the trap. Using the
w…
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.31440.3.1.1.1
wTrapIP
Address to send trap to.
RFC1155-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.31440.3.1.1.2
wTrapCommunity
Community string to send with trap message.
RFC1213-MIBDisplayStringr/w .1.3.6.1.4.1.31440.3.1.1.3
wTrapEUI
Device EUI code to base sending trap message on.
OctetStringr/w
Constraints:
range: 16-16
 .1.3.6.1.4.1.31440.3.1.1.4
wTrapVariable
Name of the variable, as stated in the XML file. For example, the name of humidity
for a EDS1068 is 'Humidity' (without the quotes).
RFC1213-MIBDisplayStringr/w .1.3.6.1.4.1.31440.3.1.1.5
wTrapHighThreshold
A trap will be generated when the variable is greater than this value or
less than or equal to this value. This number
may be positive or negative and may contain a decimal point.
RFC1213-MIBDisplayStringr/w .1.3.6.1.4.1.31440.3.1.1.6
wTrapLowThreshold
A trap will be generated when the variable is less than this value or
greater than or equal to this value. This number
may be positive or negative and may contain a decimal point.
RFC1213-MIBDisplayStringr/w .1.3.6.1.4.1.31440.3.1.1.7

owDeviceTable

table
.1.3.6.1.4.1.31440.10.3 · 1 row entry · 7 columns
Open in standard view
Uses the eds variant from /opt/observium/mibs/eds.
Command help
Walk owDeviceTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EDS-MIB' -M '/opt/observium/mibs/eds:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EDS-MIB::owDeviceTable' 
Device table
owDeviceEntry row .1.3.6.1.4.1.31440.10.3.1
Device row
Indexes
Column Syntax OID
owDeviceIndex
Index of table.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.31440.10.3.1.1
owDeviceType
An indication of the device type. This is the
last OID number to the owDeviceTypes group pointing
to the name of the device. The corresponding
device table will contain the specific information
from the device. For exam…
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.31440.10.3.1.2
owDeviceName
Text description of the device.
RFC1213-MIBDisplayString .1.3.6.1.4.1.31440.10.3.1.3
owDeviceDescription
Text description of the device.
RFC1213-MIBDisplayString .1.3.6.1.4.1.31440.10.3.1.4
owDeviceFamily
Family number as read from 1-wire device.
OctetString
Constraints:
range: 2-2
 .1.3.6.1.4.1.31440.10.3.1.5
owDeviceROM
Entire ROM code as read from 1-wire device (includes
family number and CRC). Always 16 bytes long.
OctetString
Constraints:
range: 16-16
 .1.3.6.1.4.1.31440.10.3.1.6
owDeviceHealth
Health of device. Ranges between 0 and 8 where
0 worst case and 8 is best case. Incremented
every time device responds to a search, decremented
if it does not respond.
Integer32
Constraints:
range: 0-8
 .1.3.6.1.4.1.31440.10.3.1.7

owDS2406Table

table
.1.3.6.1.4.1.31440.10.4 · 1 row entry · 9 columns
Open in standard view
Uses the eds variant from /opt/observium/mibs/eds.
Command help
Walk owDS2406Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EDS-MIB' -M '/opt/observium/mibs/eds:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EDS-MIB::owDS2406Table' 
Table for DS2406 (dual addressable switch plus
1K bit memory).
owDS2406Entry row .1.3.6.1.4.1.31440.10.4.1
DS2406 row
Indexes
Column Syntax OID
owDS2406PIOALevel
PIO-A logic level on pin. If PIO-A flip flop is
low, this input will always read low.
Enumeration
Enumerated Values:
0low
1high
 .1.3.6.1.4.1.31440.10.4.1.1
owDS2406PIOBLevel
PIO-B logic level on pin. If PIO-B flip flop is
low, this input will always read low.
Enumeration
Enumerated Values:
0low
1high
 .1.3.6.1.4.1.31440.10.4.1.2
owDS2406PIOAFlipFlop
DS2406 PIO-A Flip Flop. Sets output state of the
FF. The output is open collector, so the FF must
be high (1) to be able to read a pin state of
low (0).
Enumerationr/w
Enumerated Values:
0low
1high
 .1.3.6.1.4.1.31440.10.4.1.3
owDS2406PIOBFlipFlop
DS2406 PIO-B Flip Flop. Sets output state of the
FF. The output is open collector, so the FF must
be high (1) to be able to read a pin state of
low (0).
Enumerationr/w
Enumerated Values:
0low
1high
 .1.3.6.1.4.1.31440.10.4.1.4
owDS2406PIOAActivityLatch
High (1) if the pin state had activity. Reset
by writing to activity latch reset.
Enumeration
Enumerated Values:
0noActivity
1yesActivity
 .1.3.6.1.4.1.31440.10.4.1.5
owDS2406PIOBActivityLatch
High (1) if the pin state had activity. Reset
by writing to activity latch reset.
Enumeration
Enumerated Values:
0noActivity
1yesActivity
 .1.3.6.1.4.1.31440.10.4.1.6
owDS2406NumChnls
Number of PIO channels the device supports. PIO-A
only is 0, PIO-A and PIO-B is 1.
Enumeration
Enumerated Values:
0pioAonly
1pioAandB
 .1.3.6.1.4.1.31440.10.4.1.7
owDS2406PwrSupply
Source of power for device. 0 is parasite powered,
1 is externally powered.
Enumeration
Enumerated Values:
0pwrParasite
1pwrExternal
 .1.3.6.1.4.1.31440.10.4.1.8
owDS2406ActivityLatchReset
Activity latch reset is used to reset both PIO-A
and PIO-B activity latch. Send 1 to reset the
latch. Always reads 0.
Enumerationr/w
Enumerated Values:
0noReset
1yesReset
 .1.3.6.1.4.1.31440.10.4.1.9

owDS18B20Table

table
.1.3.6.1.4.1.31440.10.5 · 1 row entry · 5 columns
Open in standard view
Uses the eds variant from /opt/observium/mibs/eds.
Command help
Walk owDS18B20Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EDS-MIB' -M '/opt/observium/mibs/eds:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EDS-MIB::owDS18B20Table' 
Table for DS18B20 (programmable resolution 1-wire
digital thermometer).
owDS18B20Entry row .1.3.6.1.4.1.31440.10.5.1
DS18B20 row
Indexes
Column Syntax OID
owDS18B20Temperature
current temperature from device, desplayed as
a string with decimal point. Required since MIB's
cannot contain floating point numbers.
RFC1213-MIBDisplayString .1.3.6.1.4.1.31440.10.5.1.1
owDS18B20UserByte1
User byte 1 as read from EEPROM.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31440.10.5.1.2
owDS18B20UserByte2
User byte 2 as read from EEPROM.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31440.10.5.1.3
owDS18B20Resolution
Resolution of temperature reading, can be 9, 10,
11 or 12 bits. Default is 12 bits. 0 is 9 bits,
1 is 10 bits, 2 is 11 bits and 3 is 12 bits.
Enumeration
Enumerated Values:
9nineBits
10tenBits
11elevenBits
12twelveBits
 .1.3.6.1.4.1.31440.10.5.1.4
owDS18B20PwrSupply
Power source. Parasite or external. Zero is parasite.
Enumeration
Enumerated Values:
0parasitePower
255externalPower
 .1.3.6.1.4.1.31440.10.5.1.5

owDS18S20Table

table
.1.3.6.1.4.1.31440.10.6 · 1 row entry · 3 columns
Open in standard view
Uses the eds variant from /opt/observium/mibs/eds.
Command help
Walk owDS18S20Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EDS-MIB' -M '/opt/observium/mibs/eds:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EDS-MIB::owDS18S20Table' 
Table for DS18S20 device data.
owDS18S20Entry row .1.3.6.1.4.1.31440.10.6.1
Entry
Indexes
Column Syntax OID
owDS18S20Temperature
Latest temperature reading, in degrees centigrade.
RFC1213-MIBDisplayString .1.3.6.1.4.1.31440.10.6.1.1
owDS18S20UserByte1
User byte from device EEPROM.
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.31440.10.6.1.2
owDS18S20UserByte2
User byte from device EEPROM.
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.31440.10.6.1.3

owDS2423Table

table
.1.3.6.1.4.1.31440.10.7 · 1 row entry · 2 columns
Open in standard view
Uses the eds variant from /opt/observium/mibs/eds.
Command help
Walk owDS2423Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EDS-MIB' -M '/opt/observium/mibs/eds:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EDS-MIB::owDS2423Table' 
Table for DS2423 device data.
owDS2423Entry row .1.3.6.1.4.1.31440.10.7.1
DS2423 row
Indexes
Column Syntax OID
owDS2423CounterA
Counter A value.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.31440.10.7.1.1
owDS2423CounterB
Counter B value.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.31440.10.7.1.2

owDS2438Table

table
.1.3.6.1.4.1.31440.10.8 · 1 row entry · 5 columns
Open in standard view
Uses the eds variant from /opt/observium/mibs/eds.
Command help
Walk owDS2438Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EDS-MIB' -M '/opt/observium/mibs/eds:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EDS-MIB::owDS2438Table' 
Table for DS2438 device data.
owDS2438Entry row .1.3.6.1.4.1.31440.10.8.1
Entry
Indexes
Column Syntax OID
owDS2438Temperature
Temperature.
RFC1213-MIBDisplayString .1.3.6.1.4.1.31440.10.8.1.1
owDS2438SupplyVoltage
Voltage of the power supply.
RFC1213-MIBDisplayString .1.3.6.1.4.1.31440.10.8.1.2
owDS2438PinVoltage
Voltage at Pin Vad (pin 4).
RFC1213-MIBDisplayString .1.3.6.1.4.1.31440.10.8.1.3
owDS2438current
Voltage between the current pins.
RFC1213-MIBDisplayString .1.3.6.1.4.1.31440.10.8.1.4
owDS2438Humidity
Calculated humidity.
RFC1213-MIBDisplayString .1.3.6.1.4.1.31440.10.8.1.5

owDS2408Table

table
.1.3.6.1.4.1.31440.10.9 · 1 row entry · 6 columns
Open in standard view
Uses the eds variant from /opt/observium/mibs/eds.
Command help
Walk owDS2408Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EDS-MIB' -M '/opt/observium/mibs/eds:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EDS-MIB::owDS2408Table' 
Table for DS2408 (8-channel addressable switch).
owDS2408Entry row .1.3.6.1.4.1.31440.10.9.1
DS2408 row
Indexes
Column Syntax OID
owDS2408PIOLogicState
Logic level on the 8 IO pins.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31440.10.9.1.1
owDS2408PIOOutputLatchState
Output latch states. Sets output state of the
FFs. The output is open collector, so the FF must
be high (1) to be able to read a pin state of
low (0).
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31440.10.9.1.2
owDS2408PIOActivityLatchState
High (1) if the pin state had activity. Reset
by writing to activity latch reset.
Enumerationr/w
Enumerated Values:
0low
255high
 .1.3.6.1.4.1.31440.10.9.1.3
owDS2408RSTZConfiguration
Configures the RSTZ pin as a /RSTZ input (set to 0)
or a /STRB output (set to 1).
Enumerationr/w
Enumerated Values:
0low
1high
 .1.3.6.1.4.1.31440.10.9.1.4
owDS2408PowerOnResetLatch
Set high (1) with a power on reset. Reset
by writing to a 0.
Enumerationr/w
Enumerated Values:
0low
1high
 .1.3.6.1.4.1.31440.10.9.1.5
owDS2408VCCPowerStatus
High (1) if the VCC pin is connected to power,
low (0) otherwise.
Enumeration
Enumerated Values:
0low
1high
 .1.3.6.1.4.1.31440.10.9.1.6

owDS2450Table

table
.1.3.6.1.4.1.31440.10.10 · 1 row entry · 22 columns
Open in standard view
Uses the eds variant from /opt/observium/mibs/eds.
Command help
Walk owDS2450Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EDS-MIB' -M '/opt/observium/mibs/eds:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EDS-MIB::owDS2450Table' 
Table for DS2450 (8-channel addressable switch).
owDS2450Entry row .1.3.6.1.4.1.31440.10.10.1
DS2450 row
Indexes
Column Syntax OID
owDS2450ChannelAConversionValue
Conversion value of the channel, in volts.
RFC1213-MIBDisplayString .1.3.6.1.4.1.31440.10.10.1.1
owDS2450ChannelAConversionResolution
Conversion resolution of the channel. Can be set
between 1 and 16.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31440.10.10.1.2
owDS2450ChannelAConversionRange
If high (1), the maximum voltage that can be
measured is 5.10, low (0) sets the maximum voltage
to 2.55.
Enumerationr/w
Enumerated Values:
0low
1high
 .1.3.6.1.4.1.31440.10.10.1.3
owDS2450ChannelAOutputEnable
A setting of 1 enables the output transistor, use
ChannelXOutputControl to turn the transistor on / off.
Enumerationr/w
Enumerated Values:
0low
1high
 .1.3.6.1.4.1.31440.10.10.1.4
owDS2450ChannelAOutputControl
Set to low (0) to turn on the output transistor. Has
no effect if ChannelXOutputEnable is low (0).
Enumerationr/w
Enumerated Values:
0low
1high
 .1.3.6.1.4.1.31440.10.10.1.5
owDS2450ChannelBConversionValue
Conversion value of the channel, in volts.
RFC1213-MIBDisplayString .1.3.6.1.4.1.31440.10.10.1.6
owDS2450ChannelBConversionResolution
Conversion resolution of the channel. Can be set
between 1 and 16.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31440.10.10.1.7
owDS2450ChannelBConversionRange
If high (1), the maximum voltage that can be
measured is 5.10, low (0) sets the maximum voltage
to 2.55.
Enumerationr/w
Enumerated Values:
0low
1high
 .1.3.6.1.4.1.31440.10.10.1.8
owDS2450ChannelBOutputEnable
A setting of 1 enables the output transistor, use
ChannelXOutputControl to turn the transistor on / off.
Enumerationr/w
Enumerated Values:
0low
1high
 .1.3.6.1.4.1.31440.10.10.1.9
owDS2450ChannelBOutputControl
Set to low (0) to turn on the output transistor. Has
no effect if ChannelXOutputEnable is low (0).
Enumerationr/w
Enumerated Values:
0low
1high
 .1.3.6.1.4.1.31440.10.10.1.10
owDS2450ChannelCConversionValue
Conversion value of the channel, in volts.
RFC1213-MIBDisplayString .1.3.6.1.4.1.31440.10.10.1.11
owDS2450ChannelCConversionResolution
Conversion resolution of the channel. Can be set
between 1 and 16.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31440.10.10.1.12
owDS2450ChannelCConversionRange
If high (1), the maximum voltage that can be
measured is 5.10, low (0) sets the maximum voltage
to 2.55.
Enumerationr/w
Enumerated Values:
0low
1high
 .1.3.6.1.4.1.31440.10.10.1.13
owDS2450ChannelCOutputEnable
A setting of 1 enables the output transistor, use
ChannelXOutputControl to turn the transistor on / off.
Enumerationr/w
Enumerated Values:
0low
1high
 .1.3.6.1.4.1.31440.10.10.1.14
owDS2450ChannelCOutputControl
Set to low (0) to turn on the output transistor. Has
no effect if ChannelXOutputEnable is low (0).
Enumerationr/w
Enumerated Values:
0low
1high
 .1.3.6.1.4.1.31440.10.10.1.15
owDS2450ChannelDConversionValue
Conversion value of the channel, in volts.
RFC1213-MIBDisplayString .1.3.6.1.4.1.31440.10.10.1.16
owDS2450ChannelDConversionResolution
Conversion resolution of the channel. Can be set
between 1 and 16.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31440.10.10.1.17
owDS2450ChannelDConversionRange
If high (1), the maximum voltage that can be
measured is 5.10, low (0) sets the maximum voltage
to 2.55.
Enumerationr/w
Enumerated Values:
0low
1high
 .1.3.6.1.4.1.31440.10.10.1.18
owDS2450ChannelDOutputEnable
A setting of 1 enables the output transistor, use
ChannelXOutputControl to turn the transistor on / off.
Enumerationr/w
Enumerated Values:
0low
1high
 .1.3.6.1.4.1.31440.10.10.1.19
owDS2450ChannelDOutputControl
Set to low (0) to turn on the output transistor. Has
no effect if ChannelXOutputEnable is low (0).
Enumerationr/w
Enumerated Values:
0low
1high
 .1.3.6.1.4.1.31440.10.10.1.20
owDS2450PowerOnReset
Set high (1) with a power on reset. Reset
by writing any value.
Enumerationr/w
Enumerated Values:
0low
1high
 .1.3.6.1.4.1.31440.10.10.1.21
owDS2450VCCControl
Set high (1) if the VCC pin is connected to power,
set low (0) otherwise.
Enumerationr/w
Enumerated Values:
0low
1high
 .1.3.6.1.4.1.31440.10.10.1.22

owEDS0064Table

table
.1.3.6.1.4.1.31440.10.11 · 1 row entry · 2 columns
Open in standard view
Uses the eds variant from /opt/observium/mibs/eds.
Command help
Walk owEDS0064Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EDS-MIB' -M '/opt/observium/mibs/eds:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EDS-MIB::owEDS0064Table' 
Table for EDS0064 device data (temperature)
owEDS0064Entry row .1.3.6.1.4.1.31440.10.11.1
EDS0064 row
Indexes
Column Syntax OID
owEDS0064Temperature
Temperature.
RFC1213-MIBDisplayString .1.3.6.1.4.1.31440.10.11.1.1
owEDS0064Counter
Counter.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.31440.10.11.1.2

owEDS0065Table

table
.1.3.6.1.4.1.31440.10.12 · 1 row entry · 6 columns
Open in standard view
Uses the eds variant from /opt/observium/mibs/eds.
Command help
Walk owEDS0065Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EDS-MIB' -M '/opt/observium/mibs/eds:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EDS-MIB::owEDS0065Table' 
Table for EDS0065 device data (temperature and humiditiy).
owEDS0065Entry row .1.3.6.1.4.1.31440.10.12.1
Entry
Indexes
Column Syntax OID
owEDS0065Temperature
Temperature.
RFC1213-MIBDisplayString .1.3.6.1.4.1.31440.10.12.1.1
owEDS0065Humidity
Humidity.
RFC1213-MIBDisplayString .1.3.6.1.4.1.31440.10.12.1.2
owEDS0065DewPoint
DewPoint.
RFC1213-MIBDisplayString .1.3.6.1.4.1.31440.10.12.1.3
owEDS0065Humidex
Humidex.
RFC1213-MIBDisplayString .1.3.6.1.4.1.31440.10.12.1.4
owEDS0065HeatIndex
Heat Index.
RFC1213-MIBDisplayString .1.3.6.1.4.1.31440.10.12.1.5
owEDS0065Counter
Counter.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.31440.10.12.1.6

owEDS0066Table

table
.1.3.6.1.4.1.31440.10.13 · 1 row entry · 4 columns
Open in standard view
Uses the eds variant from /opt/observium/mibs/eds.
Command help
Walk owEDS0066Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EDS-MIB' -M '/opt/observium/mibs/eds:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EDS-MIB::owEDS0066Table' 
Table for EDS0001 device data (temperature and barometric pressure).
owEDS0066Entry row .1.3.6.1.4.1.31440.10.13.1
Entry
Indexes
Column Syntax OID
owEDS0066Temperature
Temperature.
RFC1213-MIBDisplayString .1.3.6.1.4.1.31440.10.13.1.1
owEDS0066BarometricPressureMb
Barometric Pressure in Millibars.
RFC1213-MIBDisplayString .1.3.6.1.4.1.31440.10.13.1.2
owEDS0066BarometricPressureHg
Barometric Pressure in Inches of Mercury.
RFC1213-MIBDisplayString .1.3.6.1.4.1.31440.10.13.1.3
owEDS0066Counter
Counter.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.31440.10.13.1.4

owEDS0067Table

table
.1.3.6.1.4.1.31440.10.14 · 1 row entry · 3 columns
Open in standard view
Uses the eds variant from /opt/observium/mibs/eds.
Command help
Walk owEDS0067Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EDS-MIB' -M '/opt/observium/mibs/eds:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EDS-MIB::owEDS0067Table' 
Table for EDS0067 device data (temperature and light).
owEDS0067Entry row .1.3.6.1.4.1.31440.10.14.1
Entry
Indexes
Column Syntax OID
owEDS0067Temperature
Temperature.
RFC1213-MIBDisplayString .1.3.6.1.4.1.31440.10.14.1.1
owEDS0067Light
Light.
RFC1213-MIBDisplayString .1.3.6.1.4.1.31440.10.14.1.2
owEDS0067Counter
Counter.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.31440.10.14.1.3

owEDS0068Table

table
.1.3.6.1.4.1.31440.10.15 · 1 row entry · 9 columns
Open in standard view
Uses the eds variant from /opt/observium/mibs/eds.
Command help
Walk owEDS0068Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EDS-MIB' -M '/opt/observium/mibs/eds:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EDS-MIB::owEDS0068Table' 
Table for EDS0068 device data (temperature, humidity, barometric pressure and light).
owEDS0068Entry row .1.3.6.1.4.1.31440.10.15.1
Entry
Indexes
Column Syntax OID
owEDS0068Temperature
Temperature.
RFC1213-MIBDisplayString .1.3.6.1.4.1.31440.10.15.1.1
owEDS0068Humidity
Humidity.
RFC1213-MIBDisplayString .1.3.6.1.4.1.31440.10.15.1.2
owEDS0068DewPoint
DewPoint.
RFC1213-MIBDisplayString .1.3.6.1.4.1.31440.10.15.1.3
owEDS0068Humidex
Humidex.
RFC1213-MIBDisplayString .1.3.6.1.4.1.31440.10.15.1.4
owEDS0068HeatIndex
Heat Index.
RFC1213-MIBDisplayString .1.3.6.1.4.1.31440.10.15.1.5
owEDS0068BarometricPressureMb
Barometric Pressure in Millibars.
RFC1213-MIBDisplayString .1.3.6.1.4.1.31440.10.15.1.6
owEDS0068BarometricPressureHg
Barometric Pressure in Inches of Mercury.
RFC1213-MIBDisplayString .1.3.6.1.4.1.31440.10.15.1.7
owEDS0068Light
Light.
RFC1213-MIBDisplayString .1.3.6.1.4.1.31440.10.15.1.8
owEDS0068Counter
Counter.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.31440.10.15.1.9

owEDS0069Table

table
.1.3.6.1.4.1.31440.10.16 · 1 row entry · 3 columns
Open in standard view
Uses the eds variant from /opt/observium/mibs/eds.
Command help
Walk owEDS0069Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EDS-MIB' -M '/opt/observium/mibs/eds:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EDS-MIB::owEDS0069Table' 
Table for EDS0069 device data (temperature and motion).
owEDS0069Entry row .1.3.6.1.4.1.31440.10.16.1
Entry
Indexes
Column Syntax OID
owEDS0069Temperature
Temperature.
RFC1213-MIBDisplayString .1.3.6.1.4.1.31440.10.16.1.1
owEDS0069Motion
Motion counter.
RFC1213-MIBDisplayString .1.3.6.1.4.1.31440.10.16.1.2
owEDS0069Counter
Counter.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.31440.10.16.1.3

owEDS0070Table

table
.1.3.6.1.4.1.31440.10.17 · 1 row entry · 5 columns
Open in standard view
Uses the eds variant from /opt/observium/mibs/eds.
Command help
Walk owEDS0070Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EDS-MIB' -M '/opt/observium/mibs/eds:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EDS-MIB::owEDS0070Table' 
Table for EDS0070 device data (vibration).
owEDS0070Entry row .1.3.6.1.4.1.31440.10.17.1
Entry
Indexes
Column Syntax OID
owEDS0070VibrationInstant
Vibration, instant value.
Enumeration
Enumerated Values:
0low
65535high
 .1.3.6.1.4.1.31440.10.17.1.1
owEDS0070VibrationPeak
Vibration, instant value.
Enumeration
Enumerated Values:
0low
65535high
 .1.3.6.1.4.1.31440.10.17.1.2
owEDS0070VibrationMax
Vibration, instant value.
Enumeration
Enumerated Values:
0low
65535high
 .1.3.6.1.4.1.31440.10.17.1.3
owEDS0070VibrationMin
Vibration, instant value.
Enumeration
Enumerated Values:
0low
65535high
 .1.3.6.1.4.1.31440.10.17.1.4
owEDS0070Counter
Counter.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.31440.10.17.1.5

owEDS0071Table

table
.1.3.6.1.4.1.31440.10.18 · 1 row entry · 2 columns
Open in standard view
Uses the eds variant from /opt/observium/mibs/eds.
Command help
Walk owEDS0071Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EDS-MIB' -M '/opt/observium/mibs/eds:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EDS-MIB::owEDS0071Table' 
Table for EDS0071 device data (RTD 4-wire).
owEDS0071Entry row .1.3.6.1.4.1.31440.10.18.1
Entry
Indexes
Column Syntax OID
owEDS0071Temperature
Temperature.
RFC1213-MIBDisplayString .1.3.6.1.4.1.31440.10.18.1.1
owEDS0071Counter
Counter.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.31440.10.18.1.2

owEDS0080Table

table
.1.3.6.1.4.1.31440.10.19 · 1 row entry · 9 columns
Open in standard view
Uses the eds variant from /opt/observium/mibs/eds.
Command help
Walk owEDS0080Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EDS-MIB' -M '/opt/observium/mibs/eds:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EDS-MIB::owEDS0080Table' 
Table for EDS0080 device data (octal 4-20ma).
owEDS0080Entry row .1.3.6.1.4.1.31440.10.19.1
Entry
Indexes
Column Syntax OID
owEDS0080Input1
Input 1.
RFC1213-MIBDisplayString .1.3.6.1.4.1.31440.10.19.1.1
owEDS0080Input2
Input 2.
RFC1213-MIBDisplayString .1.3.6.1.4.1.31440.10.19.1.2
owEDS0080Input3
Input 3.
RFC1213-MIBDisplayString .1.3.6.1.4.1.31440.10.19.1.3
owEDS0080Input4
Input 4.
RFC1213-MIBDisplayString .1.3.6.1.4.1.31440.10.19.1.4
owEDS0080Input5
Input 5.
RFC1213-MIBDisplayString .1.3.6.1.4.1.31440.10.19.1.5
owEDS0080Input6
Input 6.
RFC1213-MIBDisplayString .1.3.6.1.4.1.31440.10.19.1.6
owEDS0080Input7
Input 7.
RFC1213-MIBDisplayString .1.3.6.1.4.1.31440.10.19.1.7
owEDS0080Input8
Input 8.
RFC1213-MIBDisplayString .1.3.6.1.4.1.31440.10.19.1.8
owEDS0080Counter
Counter.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.31440.10.19.1.9

owEDS0082Table

table
.1.3.6.1.4.1.31440.10.20 · 1 row entry · 9 columns
Open in standard view
Uses the eds variant from /opt/observium/mibs/eds.
Command help
Walk owEDS0082Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EDS-MIB' -M '/opt/observium/mibs/eds:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EDS-MIB::owEDS0082Table' 
Table for EDS0082 device data (octal 0-10v).
owEDS0082Entry row .1.3.6.1.4.1.31440.10.20.1
Entry
Indexes
Column Syntax OID
owEDS0082Input1
Input 1.
RFC1213-MIBDisplayString .1.3.6.1.4.1.31440.10.20.1.1
owEDS0082Input2
Input 2.
RFC1213-MIBDisplayString .1.3.6.1.4.1.31440.10.20.1.2
owEDS0082Input3
Input 3.
RFC1213-MIBDisplayString .1.3.6.1.4.1.31440.10.20.1.3
owEDS0082Input4
Input 4.
RFC1213-MIBDisplayString .1.3.6.1.4.1.31440.10.20.1.4
owEDS0082Input5
Input 5.
RFC1213-MIBDisplayString .1.3.6.1.4.1.31440.10.20.1.5
owEDS0082Input6
Input 6.
RFC1213-MIBDisplayString .1.3.6.1.4.1.31440.10.20.1.6
owEDS0082Input7
Input 7.
RFC1213-MIBDisplayString .1.3.6.1.4.1.31440.10.20.1.7
owEDS0082Input8
Input 8.
RFC1213-MIBDisplayString .1.3.6.1.4.1.31440.10.20.1.8
owEDS0082Counter
Counter.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.31440.10.20.1.9

owEDS0083Table

table
.1.3.6.1.4.1.31440.10.21 · 1 row entry · 5 columns
Open in standard view
Uses the eds variant from /opt/observium/mibs/eds.
Command help
Walk owEDS0083Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EDS-MIB' -M '/opt/observium/mibs/eds:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EDS-MIB::owEDS0083Table' 
Table for EDS0083 device data (quad 4-20ma).
owEDS0083Entry row .1.3.6.1.4.1.31440.10.21.1
Entry
Indexes
Column Syntax OID
owEDS0083Input1
Input 1.
RFC1213-MIBDisplayString .1.3.6.1.4.1.31440.10.21.1.1
owEDS0083Input2
Input 2.
RFC1213-MIBDisplayString .1.3.6.1.4.1.31440.10.21.1.2
owEDS0083Input3
Input 3.
RFC1213-MIBDisplayString .1.3.6.1.4.1.31440.10.21.1.3
owEDS0083Input4
Input 4.
RFC1213-MIBDisplayString .1.3.6.1.4.1.31440.10.21.1.4
owEDS0083Counter
Counter.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.31440.10.21.1.5

owEDS0085Table

table
.1.3.6.1.4.1.31440.10.22 · 1 row entry · 5 columns
Open in standard view
Uses the eds variant from /opt/observium/mibs/eds.
Command help
Walk owEDS0085Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EDS-MIB' -M '/opt/observium/mibs/eds:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EDS-MIB::owEDS0085Table' 
Table for EDS0085 device data (quad 0-10v).
owEDS0085Entry row .1.3.6.1.4.1.31440.10.22.1
Entry
Indexes
Column Syntax OID
owEDS0085Input1
Input 1.
RFC1213-MIBDisplayString .1.3.6.1.4.1.31440.10.22.1.1
owEDS0085Input2
Input 2.
RFC1213-MIBDisplayString .1.3.6.1.4.1.31440.10.22.1.2
owEDS0085Input3
Input 3.
RFC1213-MIBDisplayString .1.3.6.1.4.1.31440.10.22.1.3
owEDS0085Input4
Input 4.
RFC1213-MIBDisplayString .1.3.6.1.4.1.31440.10.22.1.4
owEDS0085Counter
Counter.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.31440.10.22.1.5

owEDS0090Table

table
.1.3.6.1.4.1.31440.10.23 · 1 row entry · 57 columns
Open in standard view
Uses the eds variant from /opt/observium/mibs/eds.
Command help
Walk owEDS0090Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EDS-MIB' -M '/opt/observium/mibs/eds:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EDS-MIB::owEDS0090Table' 
Table for EDS0090 device data (octal discrete IO).
owEDS0090Entry row .1.3.6.1.4.1.31440.10.23.1
Entry
Indexes
Column Syntax OID
owEDS0090Input1
Input 1.
Enumeration
Enumerated Values:
0low
1high
 .1.3.6.1.4.1.31440.10.23.1.1
owEDS0090Input2
Input 2.
Enumeration
Enumerated Values:
0low
1high
 .1.3.6.1.4.1.31440.10.23.1.2
owEDS0090Input3
Input 3.
Enumeration
Enumerated Values:
0low
1high
 .1.3.6.1.4.1.31440.10.23.1.3
owEDS0090Input4
Input 4.
Enumeration
Enumerated Values:
0low
1high
 .1.3.6.1.4.1.31440.10.23.1.4
owEDS0090Input5
Input 5.
Enumeration
Enumerated Values:
0low
1high
 .1.3.6.1.4.1.31440.10.23.1.5
owEDS0090Input6
Input 6.
Enumeration
Enumerated Values:
0low
1high
 .1.3.6.1.4.1.31440.10.23.1.6
owEDS0090Input7
Input 7.
Enumeration
Enumerated Values:
0low
1high
 .1.3.6.1.4.1.31440.10.23.1.7
owEDS0090Input8
Input 8.
Enumeration
Enumerated Values:
0low
1high
 .1.3.6.1.4.1.31440.10.23.1.8
owEDS0090ActivityLatch1
Activity Latch 1.
Enumeration
Enumerated Values:
0off
1on
 .1.3.6.1.4.1.31440.10.23.1.9
owEDS0090ActivityLatch2
Activity Latch 2.
Enumeration
Enumerated Values:
0off
1on
 .1.3.6.1.4.1.31440.10.23.1.10
owEDS0090ActivityLatch3
Activity Latch 3.
Enumeration
Enumerated Values:
0off
1on
 .1.3.6.1.4.1.31440.10.23.1.11
owEDS0090ActivityLatch4
Activity Latch 4.
Enumeration
Enumerated Values:
0off
1on
 .1.3.6.1.4.1.31440.10.23.1.12
owEDS0090ActivityLatch5
Activity Latch 5.
Enumeration
Enumerated Values:
0off
1on
 .1.3.6.1.4.1.31440.10.23.1.13
owEDS0090ActivityLatch6
Activity Latch 6.
Enumeration
Enumerated Values:
0off
1on
 .1.3.6.1.4.1.31440.10.23.1.14
owEDS0090ActivityLatch7
Activity Latch 7.
Enumeration
Enumerated Values:
0off
1on
 .1.3.6.1.4.1.31440.10.23.1.15
owEDS0090ActivityLatch8
Activity Latch 8.
Enumeration
Enumerated Values:
0off
1on
 .1.3.6.1.4.1.31440.10.23.1.16
owEDS0090PulseCounter1
Pulse Counter 1.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.31440.10.23.1.17
owEDS0090PulseCounter2
Pulse Counter 2.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.31440.10.23.1.18
owEDS0090PulseCounter3
Pulse Counter 3.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.31440.10.23.1.19
owEDS0090PulseCounter4
Pulse Counter 4.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.31440.10.23.1.20
owEDS0090PulseCounter5
Pulse Counter 5.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.31440.10.23.1.21
owEDS0090PulseCounter6
Pulse Counter 6.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.31440.10.23.1.22
owEDS0090PulseCounter7
Pulse Counter 7.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.31440.10.23.1.23
owEDS0090PulseCounter8
Pulse Counter 8.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.31440.10.23.1.24
owEDS0090Output1
Output 1.
Enumerationr/w
Enumerated Values:
0low
1high
 .1.3.6.1.4.1.31440.10.23.1.25
owEDS0090Output2
Output 2.
Enumerationr/w
Enumerated Values:
0low
1high
 .1.3.6.1.4.1.31440.10.23.1.26
owEDS0090Output3
Output 3.
Enumerationr/w
Enumerated Values:
0low
1high
 .1.3.6.1.4.1.31440.10.23.1.27
owEDS0090Output4
Output 4.
Enumerationr/w
Enumerated Values:
0low
1high
 .1.3.6.1.4.1.31440.10.23.1.28
owEDS0090Output5
Output 5.
Enumerationr/w
Enumerated Values:
0low
1high
 .1.3.6.1.4.1.31440.10.23.1.29
owEDS0090Output6
Output 6.
Enumerationr/w
Enumerated Values:
0low
1high
 .1.3.6.1.4.1.31440.10.23.1.30
owEDS0090Output7
Output 7.
Enumerationr/w
Enumerated Values:
0low
1high
 .1.3.6.1.4.1.31440.10.23.1.31
owEDS0090Output8
Output 8.
Enumerationr/w
Enumerated Values:
0low
1high
 .1.3.6.1.4.1.31440.10.23.1.32
owEDS0090PullDown1
PullDown 1.
Enumerationr/w
Enumerated Values:
0low
1high
 .1.3.6.1.4.1.31440.10.23.1.33
owEDS0090PullDown2
PullDown 1.
Enumerationr/w
Enumerated Values:
0low
1high
 .1.3.6.1.4.1.31440.10.23.1.34
owEDS0090PullDown3
PullDown 1.
Enumerationr/w
Enumerated Values:
0low
1high
 .1.3.6.1.4.1.31440.10.23.1.35
owEDS0090PullDown4
PullDown 1.
Enumerationr/w
Enumerated Values:
0low
1high
 .1.3.6.1.4.1.31440.10.23.1.36
owEDS0090PullDown5
PullDown 1.
Enumerationr/w
Enumerated Values:
0low
1high
 .1.3.6.1.4.1.31440.10.23.1.37
owEDS0090PullDown6
PullDown 1.
Enumerationr/w
Enumerated Values:
0low
1high
 .1.3.6.1.4.1.31440.10.23.1.38
owEDS0090PullDown7
PullDown 1.
Enumerationr/w
Enumerated Values:
0low
1high
 .1.3.6.1.4.1.31440.10.23.1.39
owEDS0090PullDown8
PullDown 1.
Enumerationr/w
Enumerated Values:
0low
1high
 .1.3.6.1.4.1.31440.10.23.1.40
owEDS0090ActivityLatchReset1
Activity Latch Reset 1.
Enumerationr/w
Enumerated Values:
0nofunction
1reset
 .1.3.6.1.4.1.31440.10.23.1.41
owEDS0090ActivityLatchReset2
Activity Latch Reset 2.
Enumerationr/w
Enumerated Values:
0nofunction
1reset
 .1.3.6.1.4.1.31440.10.23.1.42
owEDS0090ActivityLatchReset3
Activity Latch Reset 3.
Enumerationr/w
Enumerated Values:
0nofunction
1reset
 .1.3.6.1.4.1.31440.10.23.1.43
owEDS0090ActivityLatchReset4
Activity Latch Reset 4.
Enumerationr/w
Enumerated Values:
0nofunction
1reset
 .1.3.6.1.4.1.31440.10.23.1.44
owEDS0090ActivityLatchReset5
Activity Latch Reset 5.
Enumerationr/w
Enumerated Values:
0nofunction
1reset
 .1.3.6.1.4.1.31440.10.23.1.45
owEDS0090ActivityLatchReset6
Activity Latch Reset 6.
Enumerationr/w
Enumerated Values:
0nofunction
1reset
 .1.3.6.1.4.1.31440.10.23.1.46
owEDS0090ActivityLatchReset7
Activity Latch Reset 7.
Enumerationr/w
Enumerated Values:
0nofunction
1reset
 .1.3.6.1.4.1.31440.10.23.1.47
owEDS0090ActivityLatchReset8
Activity Latch Reset 8.
Enumerationr/w
Enumerated Values:
0nofunction
1reset
 .1.3.6.1.4.1.31440.10.23.1.48
owEDS0090PulseCounterReset1
Pulse Counter Reset 1.
Enumerationr/w
Enumerated Values:
0nofunction
1reset
 .1.3.6.1.4.1.31440.10.23.1.49
owEDS0090PulseCounterReset2
Pulse Counter Reset 2.
Enumerationr/w
Enumerated Values:
0nofunction
1reset
 .1.3.6.1.4.1.31440.10.23.1.50
owEDS0090PulseCounterReset3
Pulse Counter Reset 3.
Enumerationr/w
Enumerated Values:
0nofunction
1reset
 .1.3.6.1.4.1.31440.10.23.1.51
owEDS0090PulseCounterReset4
Pulse Counter Reset 4.
Enumerationr/w
Enumerated Values:
0nofunction
1reset
 .1.3.6.1.4.1.31440.10.23.1.52
owEDS0090PulseCounterReset5
Pulse Counter Reset 5.
Enumerationr/w
Enumerated Values:
0nofunction
1reset
 .1.3.6.1.4.1.31440.10.23.1.53
owEDS0090PulseCounterReset6
Pulse Counter Reset 6.
Enumerationr/w
Enumerated Values:
0nofunction
1reset
 .1.3.6.1.4.1.31440.10.23.1.54
owEDS0090PulseCounterReset7
Pulse Counter Reset 7.
Enumerationr/w
Enumerated Values:
0nofunction
1reset
 .1.3.6.1.4.1.31440.10.23.1.55
owEDS0090PulseCounterReset8
Pulse Counter Reset 8.
Enumerationr/w
Enumerated Values:
0nofunction
1reset
 .1.3.6.1.4.1.31440.10.23.1.56
owEDS0090Counter
Counter.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.31440.10.23.1.57

owEDS0091Table

table
.1.3.6.1.4.1.31440.10.24 · 1 row entry · 21 columns
Open in standard view
Uses the eds variant from /opt/observium/mibs/eds.
Command help
Walk owEDS0091Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EDS-MIB' -M '/opt/observium/mibs/eds:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EDS-MIB::owEDS0091Table' 
Table for EDS0091 device data (quad opto input).
owEDS0091Entry row .1.3.6.1.4.1.31440.10.24.1
Entry
Indexes
Column Syntax OID
owEDS0091Input1
Input 1.
Enumeration
Enumerated Values:
0off
1on
 .1.3.6.1.4.1.31440.10.24.1.1
owEDS0091Input2
Input 2.
Enumeration
Enumerated Values:
0off
1on
 .1.3.6.1.4.1.31440.10.24.1.2
owEDS0091Input3
Input 3.
Enumeration
Enumerated Values:
0off
1on
 .1.3.6.1.4.1.31440.10.24.1.3
owEDS0091Input4
Input 4.
Enumeration
Enumerated Values:
0off
1on
 .1.3.6.1.4.1.31440.10.24.1.4
owEDS0091ActivityLatch1
Activity Latch 1.
Enumeration
Enumerated Values:
0off
1on
 .1.3.6.1.4.1.31440.10.24.1.5
owEDS0091ActivityLatch2
Activity Latch 2.
Enumeration
Enumerated Values:
0off
1on
 .1.3.6.1.4.1.31440.10.24.1.6
owEDS0091ActivityLatch3
Activity Latch 3.
Enumeration
Enumerated Values:
0off
1on
 .1.3.6.1.4.1.31440.10.24.1.7
owEDS0091ActivityLatch4
Activity Latch 4.
Enumeration
Enumerated Values:
0off
1on
 .1.3.6.1.4.1.31440.10.24.1.8
owEDS0091PulseCounter1
Pulse Counter 1.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.31440.10.24.1.9
owEDS0091PulseCounter2
Pulse Counter 1.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.31440.10.24.1.10
owEDS0091PulseCounter3
Pulse Counter 1.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.31440.10.24.1.11
owEDS0091PulseCounter4
Pulse Counter 1.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.31440.10.24.1.12
owEDS0091PulseCounterReset1
Pulse Counter Reset 1.
Enumerationr/w
Enumerated Values:
0off
1on
 .1.3.6.1.4.1.31440.10.24.1.13
owEDS0091PulseCounterReset2
Pulse Counter Reset 2.
Enumerationr/w
Enumerated Values:
0off
1on
 .1.3.6.1.4.1.31440.10.24.1.14
owEDS0091PulseCounterReset3
Pulse Counter Reset 3.
Enumerationr/w
Enumerated Values:
0off
1on
 .1.3.6.1.4.1.31440.10.24.1.15
owEDS0091PulseCounterReset4
Pulse Counter Reset 4.
Enumerationr/w
Enumerated Values:
0off
1on
 .1.3.6.1.4.1.31440.10.24.1.16
owEDS0091ActivityLatchReset1
Activity Latch Reset 1.
Enumerationr/w
Enumerated Values:
0off
1on
 .1.3.6.1.4.1.31440.10.24.1.17
owEDS0091ActivityLatchReset2
Activity Latch Reset 2.
Enumerationr/w
Enumerated Values:
0off
1on
 .1.3.6.1.4.1.31440.10.24.1.18
owEDS0091ActivityLatchReset3
Activity Latch Reset 3.
Enumerationr/w
Enumerated Values:
0off
1on
 .1.3.6.1.4.1.31440.10.24.1.19
owEDS0091ActivityLatchReset4
Activity Latch Reset 4.
Enumerationr/w
Enumerated Values:
0off
1on
 .1.3.6.1.4.1.31440.10.24.1.20
owEDS0091Counter
Counter.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.31440.10.24.1.21

owEDS0092Table

table
.1.3.6.1.4.1.31440.10.25 · 1 row entry · 5 columns
Open in standard view
Uses the eds variant from /opt/observium/mibs/eds.
Command help
Walk owEDS0092Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EDS-MIB' -M '/opt/observium/mibs/eds:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EDS-MIB::owEDS0092Table' 
Table for EDS0092 device data (quad relay output).
owEDS0092Entry row .1.3.6.1.4.1.31440.10.25.1
Entry
Indexes
Column Syntax OID
owEDS0092Output1
Output 1.
Enumeration
Enumerated Values:
0off
1on
 .1.3.6.1.4.1.31440.10.25.1.1
owEDS0092Output2
Output 2.
Enumeration
Enumerated Values:
0off
1on
 .1.3.6.1.4.1.31440.10.25.1.2
owEDS0092Output3
Output 3.
Enumeration
Enumerated Values:
0off
1on
 .1.3.6.1.4.1.31440.10.25.1.3
owEDS0092Output4
Output 4.
Enumeration
Enumerated Values:
0off
1on
 .1.3.6.1.4.1.31440.10.25.1.4
owEDS0092Counter
Counter.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.31440.10.25.1.5

owDS28EA00Table

table
.1.3.6.1.4.1.31440.10.26 · 1 row entry · 7 columns
Open in standard view
Uses the eds variant from /opt/observium/mibs/eds.
Command help
Walk owDS28EA00Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EDS-MIB' -M '/opt/observium/mibs/eds:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EDS-MIB::owDS28EA00Table' 
Table for DS28EA00 (1-wire
digital thermometer with PIO).
owDS28EA00Entry row .1.3.6.1.4.1.31440.10.26.1
DS28EA00 row
Indexes
Column Syntax OID
owDS28EA00Temperature
current temperature from device, displayed as
a string with decimal point. Required since MIB's
cannot contain floating point numbers.
RFC1213-MIBDisplayString .1.3.6.1.4.1.31440.10.26.1.1
owDS28EA00UserByte1
User byte 1 as read from EEPROM.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31440.10.26.1.2
owDS28EA00UserByte2
User byte 2 as read from EEPROM.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31440.10.26.1.3
owDS28EA00PIOALevel
PIO-A logic level on pin. If PIO-A flip flop is
low, this input will always read low.
Enumeration
Enumerated Values:
0low
1high
 .1.3.6.1.4.1.31440.10.26.1.4
owDS28EA00PIOBLevel
PIO-B logic level on pin. If PIO-B flip flop is
low, this input will always read low.
Enumeration
Enumerated Values:
0low
1high
 .1.3.6.1.4.1.31440.10.26.1.5
owDS28EA00PIOAFlipFlop
PIO-A Flip Flop. Sets output state of the
FF. The output is open collector, so the FF must
be high (1) to be able to read a pin state of
low (0).
Enumerationr/w
Enumerated Values:
0low
1high
 .1.3.6.1.4.1.31440.10.26.1.6
owDS28EA00PIOBFlipFlop
PIO-B Flip Flop. Sets output state of the
FF. The output is open collector, so the FF must
be high (1) to be able to read a pin state of
low (0).
Enumerationr/w
Enumerated Values:
0low
1high
 .1.3.6.1.4.1.31440.10.26.1.7

owEDS0050Table

table
.1.3.6.1.4.1.31440.10.27 · 1 row entry · 15 columns
Open in standard view
Uses the eds variant from /opt/observium/mibs/eds.
Command help
Walk owEDS0050Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EDS-MIB' -M '/opt/observium/mibs/eds:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EDS-MIB::owEDS0050Table' 
Table for EDS0050 (Temp, 
2 discrete, 1 analog (0-10v)).
owEDS0050Entry row .1.3.6.1.4.1.31440.10.27.1
Entry
Indexes
Column Syntax OID
owEDS0050Temperature
current temperature from device, displayed as
a string with decimal point. Required since MIB's
cannot contain floating point numbers.
RFC1213-MIBDisplayString .1.3.6.1.4.1.31440.10.27.1.1
owEDS0050InputVoltage
Voltage at the analog input.
RFC1213-MIBDisplayString .1.3.6.1.4.1.31440.10.27.1.2
owEDS0050Input1
Discrete state at input 1.
Enumeration
Enumerated Values:
0low
1high
 .1.3.6.1.4.1.31440.10.27.1.3
owEDS0050Input2
Discrete state at input 2.
Enumeration
Enumerated Values:
0low
1high
 .1.3.6.1.4.1.31440.10.27.1.4
owEDS0050ActivityLatch1
Set to 1 if input has changed.
Enumeration
Enumerated Values:
0low
1high
 .1.3.6.1.4.1.31440.10.27.1.5
owEDS0050ActivityLatch2
Set to 1 if input has changed.
Enumerationr/w
Enumerated Values:
0low
1high
 .1.3.6.1.4.1.31440.10.27.1.6
owEDS0050PulseCounter1
Count of the pulses on input 1.
SNMPv2-SMICounter32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.31440.10.27.1.7
owEDS0050PulseCounter2
Count of the pulses on input 2.
SNMPv2-SMICounter32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.31440.10.27.1.8
owEDS0050Output1
Output 1.
Enumerationr/w
Enumerated Values:
0low
1high
 .1.3.6.1.4.1.31440.10.27.1.9
owEDS0050Output2
Output 2.
Enumerationr/w
Enumerated Values:
0low
1high
 .1.3.6.1.4.1.31440.10.27.1.10
owEDS0050ActivityLatchReset1
Activity Latch Reset 1.
Enumerationr/w
Enumerated Values:
0nofunction
1reset
 .1.3.6.1.4.1.31440.10.27.1.11
owEDS0050ActivityLatchReset2
Activity Latch Reset 2.
Enumerationr/w
Enumerated Values:
0nofunction
1reset
 .1.3.6.1.4.1.31440.10.27.1.12
owEDS0050PulseCounterReset1
Pulse Counter Reset 1.
Enumerationr/w
Enumerated Values:
0off
1on
 .1.3.6.1.4.1.31440.10.27.1.13
owEDS0050PulseCounterReset2
Pulse Counter Reset 2.
Enumerationr/w
Enumerated Values:
0off
1on
 .1.3.6.1.4.1.31440.10.27.1.14
owEDS0050Counter
Counter.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.31440.10.27.1.15

owEDS0001Table

table
.1.3.6.1.4.1.31440.10.28 · 1 row entry · 17 columns
Open in standard view
Uses the eds variant from /opt/observium/mibs/eds.
Command help
Walk owEDS0001Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EDS-MIB' -M '/opt/observium/mibs/eds:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EDS-MIB::owEDS0001Table' 
Table for EDS0001 (System parameters).
owEDS0001Entry row .1.3.6.1.4.1.31440.10.28.1
Entry
Indexes
Column Syntax OID
owEDS0001PollCount
Number of times devices have been polled.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.31440.10.28.1.1
owEDS0001DevicesConnected
Number of devices connected.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.31440.10.28.1.2
owEDS0001LoopTime
Time in seconds devices are read.
RFC1213-MIBDisplayString .1.3.6.1.4.1.31440.10.28.1.3
owEDS0001DevicesConnectedChannel1
Devices connected on channel 1.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31440.10.28.1.4
owEDS0001DevicesConnectedChannel2
Devices connected on channel 2.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31440.10.28.1.5
owEDS0001DevicesConnectedChannel3
Devices connected on channel 3.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31440.10.28.1.6
owEDS0001ErrorsChannel1
Errors on channel 1.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.31440.10.28.1.7
owEDS0001ErrorsChannel2
Errors on channel 2.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.31440.10.28.1.8
owEDS0001ErrorsChannel3
Errors on channel 3.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.31440.10.28.1.9
owEDS0001VoltageChannel1
Voltage on channel 1.
RFC1213-MIBDisplayString .1.3.6.1.4.1.31440.10.28.1.10
owEDS0001VoltageChannel2
Voltage on channel 2.
RFC1213-MIBDisplayString .1.3.6.1.4.1.31440.10.28.1.11
owEDS0001VoltageChannel3
Voltage on channel 3.
RFC1213-MIBDisplayString .1.3.6.1.4.1.31440.10.28.1.12
owEDS0001InputVoltage
Power supply voltage.
RFC1213-MIBDisplayString .1.3.6.1.4.1.31440.10.28.1.13
owEDS0001DeviceName
Device name.
RFC1213-MIBDisplayString .1.3.6.1.4.1.31440.10.28.1.14
owEDS0001HostName
Host name.
RFC1213-MIBDisplayString .1.3.6.1.4.1.31440.10.28.1.15
owEDS0001MACAddress
Ethernet MAC address.
RFC1213-MIBDisplayString .1.3.6.1.4.1.31440.10.28.1.16
owEDS0001TimeStamp
current date / time.
RFC1213-MIBDisplayString .1.3.6.1.4.1.31440.10.28.1.17

wDeviceTable

table
.1.3.6.1.4.1.31440.11.3 · 1 row entry · 8 columns
Open in standard view
Uses the eds variant from /opt/observium/mibs/eds.
Command help
Walk wDeviceTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EDS-MIB' -M '/opt/observium/mibs/eds:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EDS-MIB::wDeviceTable' 
Entry
wDeviceEntry row .1.3.6.1.4.1.31440.11.3.1
Entry
Indexes
Column Syntax OID
wDeviceIndex
Index of table.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.31440.11.3.1.1
wDeviceType
An indication of the device type. This is the
last OID number to the wDeviceTypes group pointing
to the name of the device. The corresponding
device table will contain the specific information
from the device. For examp…
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31440.11.3.1.2
wDeviceName
Name of the device.
RFC1213-MIBDisplayString .1.3.6.1.4.1.31440.11.3.1.3
wDeviceDescription
Text description of the device.
RFC1213-MIBDisplayString .1.3.6.1.4.1.31440.11.3.1.4
wDeviceFamily
Family number.
OctetString
Constraints:
range: 2-2
 .1.3.6.1.4.1.31440.11.3.1.5
wDeviceEUI
Entire EUI as read from device.
OctetString
Constraints:
range: 16-16
 .1.3.6.1.4.1.31440.11.3.1.6
wDeviceHealth
Health of device. Ranges between 0 and 7 where
0 worst case and 7 is best case. Incremented
every time device responds to a search, decremented
if it does not respond.
Integer32
Constraints:
range: 0-8
 .1.3.6.1.4.1.31440.11.3.1.7
wDeviceTag
Tag from device.
RFC1213-MIBDisplayString .1.3.6.1.4.1.31440.11.3.1.8

wEDS1068Table

table
.1.3.6.1.4.1.31440.11.4 · 1 row entry · 18 columns
Open in standard view
Uses the eds variant from /opt/observium/mibs/eds.
Command help
Walk wEDS1068Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EDS-MIB' -M '/opt/observium/mibs/eds:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EDS-MIB::wEDS1068Table' 
Table for EDS1068 device data (temperature, humidity, barometric pressure and light).
wEDS1068Entry row .1.3.6.1.4.1.31440.11.4.1
Entry
Indexes
Column Syntax OID
wEDS1068Temperature
Temperature.
RFC1213-MIBDisplayString .1.3.6.1.4.1.31440.11.4.1.1
wEDS1068Humidity
Humidity.
RFC1213-MIBDisplayString .1.3.6.1.4.1.31440.11.4.1.2
wEDS1068DewPoint
DewPoint.
RFC1213-MIBDisplayString .1.3.6.1.4.1.31440.11.4.1.3
wEDS1068Humidex
Humidex.
RFC1213-MIBDisplayString .1.3.6.1.4.1.31440.11.4.1.4
wEDS1068HeatIndex
Heat Index.
RFC1213-MIBDisplayString .1.3.6.1.4.1.31440.11.4.1.5
wEDS1068BarometricPressure
Barometric Pressure in Millibars.
RFC1213-MIBDisplayString .1.3.6.1.4.1.31440.11.4.1.6
wEDS1068LEDState
LED state.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31440.11.4.1.7
wEDS1068RelayState
Relay state.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31440.11.4.1.8
wEDS1068Light
Light.
RFC1213-MIBDisplayString .1.3.6.1.4.1.31440.11.4.1.9
wEDS1068Input1
Input 1 state.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31440.11.4.1.10
wEDS1068ActivityLatch1
Activity latch 1 state.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31440.11.4.1.11
wEDS1068PulseCounter1
Pulse counter 1.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.31440.11.4.1.12
wEDS1068Battery
Battery voltage.
RFC1213-MIBDisplayString .1.3.6.1.4.1.31440.11.4.1.13
wEDS1068ReadCounter
Read counter.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.31440.11.4.1.14
wEDS1068LEDFunction
LED function.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31440.11.4.1.15
wEDS1068RelayFunction
Relay function.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31440.11.4.1.16
wEDS1068LEDSetState
LED set state.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31440.11.4.1.17
wEDS1068RelaySetState
Relay set state.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31440.11.4.1.18

wEDS1067Table

table
.1.3.6.1.4.1.31440.11.5 · 1 row entry · 13 columns
Open in standard view
Uses the eds variant from /opt/observium/mibs/eds.
Command help
Walk wEDS1067Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EDS-MIB' -M '/opt/observium/mibs/eds:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EDS-MIB::wEDS1067Table' 
Table for EDS1067 device data (temperature, humidity, barometric pressure and light).
wEDS1067Entry row .1.3.6.1.4.1.31440.11.5.1
Entry
Indexes
Column Syntax OID
wEDS1067Temperature
Temperature.
RFC1213-MIBDisplayString .1.3.6.1.4.1.31440.11.5.1.1
wEDS1067LEDState
LED state.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31440.11.5.1.2
wEDS1067RelayState
Relay state.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31440.11.5.1.3
wEDS1067Light
Light.
RFC1213-MIBDisplayString .1.3.6.1.4.1.31440.11.5.1.4
wEDS1067Input1
Input 1 state.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31440.11.5.1.5
wEDS1067ActivityLatch1
Activity latch 1 state.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31440.11.5.1.6
wEDS1067PulseCounter1
Pulse counter 1.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.31440.11.5.1.7
wEDS1067Battery
Battery voltage.
RFC1213-MIBDisplayString .1.3.6.1.4.1.31440.11.5.1.8
wEDS1067ReadCounter
Read counter.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.31440.11.5.1.9
wEDS1067LEDFunction
LED function.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31440.11.5.1.10
wEDS1067RelayFunction
Relay function.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31440.11.5.1.11
wEDS1067LEDSetState
LED set state.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31440.11.5.1.12
wEDS1067RelaySetState
Relay set state.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31440.11.5.1.13

wEDS1066Table

table
.1.3.6.1.4.1.31440.11.6 · 1 row entry · 13 columns
Open in standard view
Uses the eds variant from /opt/observium/mibs/eds.
Command help
Walk wEDS1066Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EDS-MIB' -M '/opt/observium/mibs/eds:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EDS-MIB::wEDS1066Table' 
Table for EDS1066 device data (temperature, humidity, barometric pressure and light).
wEDS1066Entry row .1.3.6.1.4.1.31440.11.6.1
Entry
Indexes
Column Syntax OID
wEDS1066Temperature
Temperature.
RFC1213-MIBDisplayString .1.3.6.1.4.1.31440.11.6.1.1
wEDS1066BarometricPressure
Barometric Pressure in Millibars.
RFC1213-MIBDisplayString .1.3.6.1.4.1.31440.11.6.1.2
wEDS1066LEDState
LED state.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31440.11.6.1.3
wEDS1066RelayState
Relay state.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31440.11.6.1.4
wEDS1066Input1
Input 1 state.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31440.11.6.1.5
wEDS1066ActivityLatch1
Activity latch 1 state.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31440.11.6.1.6
wEDS1066PulseCounter1
Pulse counter 1.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.31440.11.6.1.7
wEDS1066Battery
Battery voltage.
RFC1213-MIBDisplayString .1.3.6.1.4.1.31440.11.6.1.8
wEDS1066ReadCounter
Read counter.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.31440.11.6.1.9
wEDS1066LEDFunction
LED function.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31440.11.6.1.10
wEDS1066RelayFunction
Relay function.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31440.11.6.1.11
wEDS1066LEDSetState
LED set state.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31440.11.6.1.12
wEDS1066RelaySetState
Relay set state.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31440.11.6.1.13

wEDS1065Table

table
.1.3.6.1.4.1.31440.11.7 · 1 row entry · 16 columns
Open in standard view
Uses the eds variant from /opt/observium/mibs/eds.
Command help
Walk wEDS1065Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EDS-MIB' -M '/opt/observium/mibs/eds:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EDS-MIB::wEDS1065Table' 
Table for EDS1065 device data (temperature, humidity, barometric pressure and light).
wEDS1065Entry row .1.3.6.1.4.1.31440.11.7.1
Entry
Indexes
Column Syntax OID
wEDS1065Temperature
Temperature.
RFC1213-MIBDisplayString .1.3.6.1.4.1.31440.11.7.1.1
wEDS1065Humidity
Humidity.
RFC1213-MIBDisplayString .1.3.6.1.4.1.31440.11.7.1.2
wEDS1065DewPoint
DewPoint.
RFC1213-MIBDisplayString .1.3.6.1.4.1.31440.11.7.1.3
wEDS1065Humidex
Humidex.
RFC1213-MIBDisplayString .1.3.6.1.4.1.31440.11.7.1.4
wEDS1065HeatIndex
Heat Index.
RFC1213-MIBDisplayString .1.3.6.1.4.1.31440.11.7.1.5
wEDS1065LEDState
LED state.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31440.11.7.1.6
wEDS1065RelayState
Relay state.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31440.11.7.1.7
wEDS1065Input1
Input 1 state.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31440.11.7.1.8
wEDS1065ActivityLatch1
Activity latch 1 state.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31440.11.7.1.9
wEDS1065PulseCounter1
Pulse counter 1.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.31440.11.7.1.10
wEDS1065Battery
Battery voltage.
RFC1213-MIBDisplayString .1.3.6.1.4.1.31440.11.7.1.11
wEDS1065ReadCounter
Read counter.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.31440.11.7.1.12
wEDS1065LEDFunction
LED function.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31440.11.7.1.13
wEDS1065RelayFunction
Relay function.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31440.11.7.1.14
wEDS1065LEDSetState
LED set state.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31440.11.7.1.15
wEDS1065RelaySetState
Relay set state.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31440.11.7.1.16

wEDS1064Table

table
.1.3.6.1.4.1.31440.11.8 · 1 row entry · 12 columns
Open in standard view
Uses the eds variant from /opt/observium/mibs/eds.
Command help
Walk wEDS1064Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EDS-MIB' -M '/opt/observium/mibs/eds:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EDS-MIB::wEDS1064Table' 
Table for EDS1064 device data (temperature, humidity, barometric pressure and light).
wEDS1064Entry row .1.3.6.1.4.1.31440.11.8.1
Entry
Indexes
Column Syntax OID
wEDS1064Temperature
Temperature.
RFC1213-MIBDisplayString .1.3.6.1.4.1.31440.11.8.1.1
wEDS1064LEDState
LED state.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31440.11.8.1.2
wEDS1064RelayState
Relay state.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31440.11.8.1.3
wEDS1064Input1
Input 1 state.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31440.11.8.1.4
wEDS1064ActivityLatch1
Activity latch 1 state.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31440.11.8.1.5
wEDS1064PulseCounter1
Pulse counter 1.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.31440.11.8.1.6
wEDS1064Battery
Battery voltage.
RFC1213-MIBDisplayString .1.3.6.1.4.1.31440.11.8.1.7
wEDS1064ReadCounter
Read counter.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.31440.11.8.1.8
wEDS1064LEDFunction
LED function.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31440.11.8.1.9
wEDS1064RelayFunction
Relay function.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31440.11.8.1.10
wEDS1064LEDSetState
LED set state.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31440.11.8.1.11
wEDS1064RelaySetState
Relay set state.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31440.11.8.1.12

wEDS1101Table

table
.1.3.6.1.4.1.31440.11.9 · 1 row entry · 2 columns
Open in standard view
Uses the eds variant from /opt/observium/mibs/eds.
Command help
Walk wEDS1101Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EDS-MIB' -M '/opt/observium/mibs/eds:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EDS-MIB::wEDS1101Table' 
Table for EDS1101 device data (repeater).
wEDS1101Entry row .1.3.6.1.4.1.31440.11.9.1
Entry
Indexes
Column Syntax OID
wEDS1101DevicesConnected
Number of devices connected.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31440.11.9.1.1
wEDS1101SendCounter
Send counter.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.31440.11.9.1.2

wEDS2101Table

table
.1.3.6.1.4.1.31440.11.10 · 1 row entry · 2 columns
Open in standard view
Uses the eds variant from /opt/observium/mibs/eds.
Command help
Walk wEDS2101Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EDS-MIB' -M '/opt/observium/mibs/eds:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EDS-MIB::wEDS2101Table' 
Table for EDS2101 device data (repeater).
wEDS2101Entry row .1.3.6.1.4.1.31440.11.10.1
Entry
Indexes
Column Syntax OID
wEDS2101DevicesConnected
Number of devices connected.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31440.11.10.1.1
wEDS2101SendCounter
Send counter.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.31440.11.10.1.2

wEDS2040Table

table
.1.3.6.1.4.1.31440.11.11 · 1 row entry · 15 columns
Open in standard view
Uses the eds variant from /opt/observium/mibs/eds.
Command help
Walk wEDS2040Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EDS-MIB' -M '/opt/observium/mibs/eds:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EDS-MIB::wEDS2040Table' 
Table for EDS2040 device data (temperature, humidity, probes).
wEDS2040Entry row .1.3.6.1.4.1.31440.11.11.1
Entry
Indexes
Column Syntax OID
wEDS2040Temperature
Temperature.
RFC1213-MIBDisplayString .1.3.6.1.4.1.31440.11.11.1.1
wEDS2040Humidity
Humidity.
RFC1213-MIBDisplayString .1.3.6.1.4.1.31440.11.11.1.2
wEDS2040Probe1
Probe 1 value.
RFC1213-MIBDisplayString .1.3.6.1.4.1.31440.11.11.1.3
wEDS2040Probe1ID
Probe 1 ID.
RFC1213-MIBDisplayString .1.3.6.1.4.1.31440.11.11.1.4
wEDS2040Probe1Health
Probe 1 health.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31440.11.11.1.5
wEDS2040Probe2
Probe 2 value.
RFC1213-MIBDisplayString .1.3.6.1.4.1.31440.11.11.1.6
wEDS2040Probe2ID
Probe 1 ID.
RFC1213-MIBDisplayString .1.3.6.1.4.1.31440.11.11.1.7
wEDS2040Probe2Health
Probe 1 health.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31440.11.11.1.8
wEDS2040Probe3
Probe 3 value.
RFC1213-MIBDisplayString .1.3.6.1.4.1.31440.11.11.1.9
wEDS2040Probe3ID
Probe 1 ID.
RFC1213-MIBDisplayString .1.3.6.1.4.1.31440.11.11.1.10
wEDS2040Probe3Health
Probe 1 health.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31440.11.11.1.11
wEDS2040Input1
Input 1 state.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31440.11.11.1.12
wEDS2040ActivityLatch1
Activity latch 1 state.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31440.11.11.1.13
wEDS2040Battery
Battery voltage.
RFC1213-MIBDisplayString .1.3.6.1.4.1.31440.11.11.1.14
wEDS2040ReadCounter
Read counter.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.31440.11.11.1.15

wEDS2041Table

table
.1.3.6.1.4.1.31440.11.12 · 1 row entry · 15 columns
Open in standard view
Uses the eds variant from /opt/observium/mibs/eds.
Command help
Walk wEDS2041Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EDS-MIB' -M '/opt/observium/mibs/eds:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EDS-MIB::wEDS2041Table' 
Table for EDS2041 device data (temperature, humidity, probes).
wEDS2041Entry row .1.3.6.1.4.1.31440.11.12.1
Entry
Indexes
Column Syntax OID
wEDS2041Temperature
Temperature.
RFC1213-MIBDisplayString .1.3.6.1.4.1.31440.11.12.1.1
wEDS2041Humidity
Humidity.
RFC1213-MIBDisplayString .1.3.6.1.4.1.31440.11.12.1.2
wEDS2041Probe1
Probe 1 value.
RFC1213-MIBDisplayString .1.3.6.1.4.1.31440.11.12.1.3
wEDS2041Probe1ID
Probe 1 ID.
RFC1213-MIBDisplayString .1.3.6.1.4.1.31440.11.12.1.4
wEDS2041Probe1Health
Probe 1 health.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31440.11.12.1.5
wEDS2041Probe2
Probe 2 value.
RFC1213-MIBDisplayString .1.3.6.1.4.1.31440.11.12.1.6
wEDS2041Probe2ID
Probe 2 ID.
RFC1213-MIBDisplayString .1.3.6.1.4.1.31440.11.12.1.7
wEDS2041Probe2Health
Probe 2 health.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31440.11.12.1.8
wEDS2041Probe3
Probe 3 value.
RFC1213-MIBDisplayString .1.3.6.1.4.1.31440.11.12.1.9
wEDS2041Probe3ID
Probe 3 ID.
RFC1213-MIBDisplayString .1.3.6.1.4.1.31440.11.12.1.10
wEDS2041Probe3Health
Probe 3 health.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31440.11.12.1.11
wEDS2041Input1
Input 1 state.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31440.11.12.1.12
wEDS2041ActivityLatch1
Activity latch 1 state.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31440.11.12.1.13
wEDS2041Battery
Battery voltage.
RFC1213-MIBDisplayString .1.3.6.1.4.1.31440.11.12.1.14
wEDS2041ReadCounter
Read counter.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.31440.11.12.1.15

wEDS2042Table

table
.1.3.6.1.4.1.31440.11.13 · 1 row entry · 11 columns
Open in standard view
Uses the eds variant from /opt/observium/mibs/eds.
Command help
Walk wEDS2042Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EDS-MIB' -M '/opt/observium/mibs/eds:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EDS-MIB::wEDS2042Table' 
Table for EDS2042 device data (probes).
wEDS2042Entry row .1.3.6.1.4.1.31440.11.13.1
Entry
Indexes
Column Syntax OID
wEDS2042Probe1
Probe 1 value.
RFC1213-MIBDisplayString .1.3.6.1.4.1.31440.11.13.1.1
wEDS2042Probe1ID
Probe 1 ID.
RFC1213-MIBDisplayString .1.3.6.1.4.1.31440.11.13.1.2
wEDS2042Probe1Health
Probe 1 health.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31440.11.13.1.3
wEDS2042Probe2
Probe 2 value.
RFC1213-MIBDisplayString .1.3.6.1.4.1.31440.11.13.1.4
wEDS2042Probe2ID
Probe 2 ID.
RFC1213-MIBDisplayString .1.3.6.1.4.1.31440.11.13.1.5
wEDS2042Probe2Health
Probe 2 health.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31440.11.13.1.6
wEDS2042Probe3
Probe 3 value.
RFC1213-MIBDisplayString .1.3.6.1.4.1.31440.11.13.1.7
wEDS2042Probe3ID
Probe 3 ID.
RFC1213-MIBDisplayString .1.3.6.1.4.1.31440.11.13.1.8
wEDS2042Probe3Health
Probe 3 health.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31440.11.13.1.9
wEDS2042Battery
Battery voltage.
RFC1213-MIBDisplayString .1.3.6.1.4.1.31440.11.13.1.10
wEDS2042ReadCounter
Read counter.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.31440.11.13.1.11

wEDS2030Table

table
.1.3.6.1.4.1.31440.11.14 · 1 row entry · 9 columns
Open in standard view
Uses the eds variant from /opt/observium/mibs/eds.
Command help
Walk wEDS2030Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EDS-MIB' -M '/opt/observium/mibs/eds:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EDS-MIB::wEDS2030Table' 
Table for EDS2030 device data (dual RTD).
wEDS2030Entry row .1.3.6.1.4.1.31440.11.14.1
Entry
Indexes
Column Syntax OID
wEDS2030RTD1Temperature
RTD1 Temperature.
RFC1213-MIBDisplayString .1.3.6.1.4.1.31440.11.14.1.1
wEDS2030RTD1Ohms
RTD1 Ohms.
RFC1213-MIBDisplayString .1.3.6.1.4.1.31440.11.14.1.2
wEDS2030RTD1Fault
RTD1 Fault.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31440.11.14.1.3
wEDS2030RTD2Temperature
RTD2 Temperature.
RFC1213-MIBDisplayString .1.3.6.1.4.1.31440.11.14.1.4
wEDS2030RTD2Ohms
RTD2 Ohms.
RFC1213-MIBDisplayString .1.3.6.1.4.1.31440.11.14.1.5
wEDS2030RTD2Fault
RTD2 Fault.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31440.11.14.1.6
wEDS2030PowerSource
Power source.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31440.11.14.1.7
wEDS2030Battery
Battery voltage.
RFC1213-MIBDisplayString .1.3.6.1.4.1.31440.11.14.1.8
wEDS2030ReadCounter
Read counter.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.31440.11.14.1.9

wEDS2033Table

table
.1.3.6.1.4.1.31440.11.15 · 1 row entry · 6 columns
Open in standard view
Uses the eds variant from /opt/observium/mibs/eds.
Command help
Walk wEDS2033Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EDS-MIB' -M '/opt/observium/mibs/eds:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EDS-MIB::wEDS2033Table' 
Table for EDS2033 device data (dual analog).
wEDS2033Entry row .1.3.6.1.4.1.31440.11.15.1
Entry
Indexes
Column Syntax OID
wEDS2033I4to20mA1
4 to 20mA input 1.
RFC1213-MIBDisplayString .1.3.6.1.4.1.31440.11.15.1.1
wEDS2033I4to20mA2
4 to 20mA input 2.
RFC1213-MIBDisplayString .1.3.6.1.4.1.31440.11.15.1.2
wEDS2033V0to10V1
0 to 10V input 1.
RFC1213-MIBDisplayString .1.3.6.1.4.1.31440.11.15.1.3
wEDS2033v0to10V2
0 to 10V input 2.
RFC1213-MIBDisplayString .1.3.6.1.4.1.31440.11.15.1.4
wEDS2033Battery
Battery voltage.
RFC1213-MIBDisplayString .1.3.6.1.4.1.31440.11.15.1.5
wEDS2033ReadCounter
Read counter.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.31440.11.15.1.6