EDGECORE-IPv6 Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view

Tables

Rows

Columns

rlIpAddressTable

table

.1.3.6.1.4.1.259.10.1.14.89.26.19 · 1 row entry · 2 columns

Open in standard view

Uses the edgecore variant from /opt/observium/mibs/edgecore.

Command help

Walk rlIpAddressTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EDGECORE-IPv6' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EDGECORE-IPv6::rlIpAddressTable'

This table is parallel to ipAddressTable, and is used to
add/delete IPv6 entries to/from that table. It contains
private objects.

rlIpAddressEntry row .1.3.6.1.4.1.259.10.1.14.89.26.19.1

An address mapping for a particular interface.

Indexes

No indexes recorded

Column Syntax OID

rlIpAddressPrefixLength

The prefix length of this address.

INET-ADDRESS-MIBInetAddressPrefixLengthr/w

Type Constraints:
range: 0..2040

.1.3.6.1.4.1.259.10.1.14.89.26.19.1.1

rlIpAddressType

Extend standard field ipAddressType to multicast

Enumeration

Enumerated Values:

1	unicast
2	anycast
3	broadcast
4	multicast

.1.3.6.1.4.1.259.10.1.14.89.26.19.1.2

rlipv6InterfaceTable

table

.1.3.6.1.4.1.259.10.1.14.89.26.20 · 1 row entry · 5 columns

Open in standard view

Uses the edgecore variant from /opt/observium/mibs/edgecore.

Command help

Walk rlipv6InterfaceTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EDGECORE-IPv6' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EDGECORE-IPv6::rlipv6InterfaceTable'

This table is parallel to ipv6InterfaceTable, and is used to
configure additional interface parameters.

rlipv6InterfaceEntry row .1.3.6.1.4.1.259.10.1.14.89.26.20.1

Additional configuration parameters for a particular interface.

Indexes

No indexes recorded

Column Syntax OID

rlipv6InterfaceNdDadAttemps

ND Duplicated address detection number of attempts.

Integer32r/w

Constraints:
range: 0-600

.1.3.6.1.4.1.259.10.1.14.89.26.20.1.1

rlipv6InterfaceAutoconfigEnable

Enables or disables Stateless Address Auto configuration
on specific interface.

Enumerationr/w

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.259.10.1.14.89.26.20.1.2

rlipv6InterfaceIcmpUnreachSendEnable

Enables or disables sending of ICMP Destination Unreachable
Error on specific interface.

Enumerationr/w

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.259.10.1.14.89.26.20.1.3

rlipv6InterfaceLinkMTU

The maximum transmission unit (MTU) size of IPv6 packets
sent on an interface in bytes.

Unsigned32r/w

Constraints:
range: 1280-65535

.1.3.6.1.4.1.259.10.1.14.89.26.20.1.4

rlipv6InterfaceMLDVersion

Set version of MLD protocol on specific interface.

Unsigned32r/w

Constraints:
range: 1-2

.1.3.6.1.4.1.259.10.1.14.89.26.20.1.5

rlinetCidrRouteTable

table

.1.3.6.1.4.1.259.10.1.14.89.26.21 · 1 row entry · 1 columns

Open in standard view

Uses the edgecore variant from /opt/observium/mibs/edgecore.

Command help

Walk rlinetCidrRouteTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EDGECORE-IPv6' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EDGECORE-IPv6::rlinetCidrRouteTable'

This table is parallel to inetCidrRouteTable, and is used to
configure or display additional route parameters.

rlinetCidrRouteEntry row .1.3.6.1.4.1.259.10.1.14.89.26.21.1

Additional parameters for a particular route.

Indexes

No indexes recorded

Column	Syntax	OID
rlinetCidrRouteLifetime The remaining length of time, in seconds, that this route will continue to be valid, i.e., time until deprecation. A value of 4,294,967,295 represents infinity.	secondsSNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.259.10.1.14.89.26.21.1.1`

rlipNetToPhysicalTable

table

.1.3.6.1.4.1.259.10.1.14.89.26.22 · 1 row entry · 1 columns

Open in standard view

Uses the edgecore variant from /opt/observium/mibs/edgecore.

Command help

Walk rlipNetToPhysicalTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EDGECORE-IPv6' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EDGECORE-IPv6::rlipNetToPhysicalTable'

This table is parallel to ipNetToPhysicalTable, and is used to
configure or display additional neighbor parameters.

rlipNetToPhysicalEntry row .1.3.6.1.4.1.259.10.1.14.89.26.22.1

Additional parameters for a neighbor

Indexes

No indexes recorded

Column Syntax OID

rlipNetToPhysicalIsRouter

This object has the value 'true(1)', if the neighbor
is router; otherwise, the value is 'false(2)'.

SNMPv2-TCTruthValue

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.259.10.1.14.89.26.22.1.1