Dlink-IMPB-MNG Table View

The table specifies all IMPB station.
The entry contains IP address and MAC of the station and
also list of ports, packet type and Device type of this station.

rlIMPBMngEntry row .1.3.6.1.4.1.171.10.94.89.89.139.1.1.1

The row definition for this table.

Indexes

rlIMPBMngIPAddress

Column	Syntax	OID
rlIMPBMngIPAddress IP address of station.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.171.10.94.89.89.139.1.1.1.1
rlIMPBMngPacketType Packet type of IMPB.	IMPBPacketTyper/w Type Values: 1 ip 2 arp 3 iparp	.1.3.6.1.4.1.171.10.94.89.89.139.1.1.1.2
rlIMPBMngPMACAddress Station mac address	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.171.10.94.89.89.139.1.1.1.3
rlIMPBMngDeviceType Station type	IMPBDeviceTyper/w Type Values: 1 host 2 dhcpSrv 3 router 4 routerDhcp	.1.3.6.1.4.1.171.10.94.89.89.139.1.1.1.4
rlIMPBMngPortlist List of ports that the station is configured on.	Q-BRIDGE-MIBPortListr/w	.1.3.6.1.4.1.171.10.94.89.89.139.1.1.1.5
rlIMPBMngMode Is this station locked or not.	IMPBLockModer/w Type Values: 1 unlocked 2 locked	.1.3.6.1.4.1.171.10.94.89.89.139.1.1.1.6
rlIMPBMngRouterBandwidth Specifies, for Router entry, , egress Bandwidth on the associated ports. Zero means disabled.	Unsigned32r/w Constraints: range: 0-0 range: 100-1000000	.1.3.6.1.4.1.171.10.94.89.89.139.1.1.1.7
rlIMPBMngRowStatus A status can be destroy, active or createAndGo	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.171.10.94.89.89.139.1.1.1.8

The table specifies the Bandwidth value for each Port that at least one Router
station is configured on it.

rlIMPBMngPortBandwidthEntry row .1.3.6.1.4.1.171.10.94.89.89.139.1.3.1

The row definition for this table.

Indexes

IF-MIBifIndex

Column	Syntax	OID
rlIMPBMngBandwidth This variable specifies what is the Bandwidth value on the specific ifIndex. Zero means disabled.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.171.10.94.89.89.139.1.3.1.1

The table shows the Bandwidth information per configured router

rlIMPBMngRouterBandwidthEntry row .1.3.6.1.4.1.171.10.94.89.89.139.1.4.1

The row definition for this table.

Indexes

rlIMPBRouterIPAddress

Column	Syntax	OID
rlIMPBRouterIPAddress IP address of station.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.171.10.94.89.89.139.1.4.1.1
rlIMPBRouterPortlist List of ports that the router is configured on.	Q-BRIDGE-MIBPortList	.1.3.6.1.4.1.171.10.94.89.89.139.1.4.1.2
rlIMPBRouterBandwidth This variable specifies the Bandwidth value for a specific router, Zero means disabled.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.171.10.94.89.89.139.1.4.1.3