DS0-MIB
The MIB module to describe
DS0 interfaces objects.
- Source file
DS0-MIB- Last revised
- Identity
ds0- Base OID
1.3.6.1.2.1.10.81
Imported Objects
| IF-MIB | ifIndex InterfaceIndex InterfaceIndexOrZero |
| SNMPv2-CONF | MODULE-COMPLIANCE (no object page) OBJECT-GROUP (no object page) |
| SNMPv2-SMI | MODULE-IDENTITY (no object page) OBJECT-TYPE (no object page) transmission |
| SNMPv2-TC | DisplayString TruthValue |
Net-SNMP examples using the rfc MIB directory Show commands
These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.
Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'DS0-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'DS0-MIB::ds0'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DS0-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DS0-MIB::ds0'
Objects (17)
Showing 17 of 17 objects
Object legend
Table
Row
Column
Scalar
Node
Object type
Icons distinguish tables, entry rows, columns, scalars, and structural nodes.
SNMPv2-TCTruthValue
Syntax
Blue badges identify the value syntax. Connected badges read as defining module and convention.
IF-MIBifIndex
Table index
Green identifies an index object; yellow names its module when the index is defined elsewhere.
r/w
deprecated
obsolete
Access and status
r/w means read-write. Grey labels mark definitions retained for compatibility.
OBS ✓
Observium use
The indicator appears only when Observium directly references that object.
ifOperStatus
.1.3.6.1.2.1…
Names and OIDs
Object names link to their detail pages. Hover or focus a linked name or badge for available definition details.
.1.3.6.1.2.1.10.81 |
||
.1.3.6.1.2.1.10.81.1 |
||
.1.3.6.1.2.1.10.81.1.1 |
||
|
Integer32
|
.1.3.6.1.2.1.10.81.1.1.1 |
|
.1.3.6.1.2.1.10.81.1.1.2 |
||
|
OctetString
|
.1.3.6.1.2.1.10.81.1.1.3 |
|
|
dsx0IdleCode
r/w
|
Integer32
|
.1.3.6.1.2.1.10.81.1.1.4 |
|
dsx0SeizedCode
r/w
|
Integer32
|
.1.3.6.1.2.1.10.81.1.1.5 |
|
Integer32
|
.1.3.6.1.2.1.10.81.1.1.6 |
|
.1.3.6.1.2.1.10.81.1.1.7 |
||
.1.3.6.1.2.1.10.81.1.1.8 |
||
.1.3.6.1.2.1.10.81.2 |
||
.1.3.6.1.2.1.10.81.2.1 |
||
.1.3.6.1.2.1.10.81.2.2 |
||
.1.3.6.1.2.1.10.81.3 |
||
.1.3.6.1.2.1.10.81.3.1 |
||
.1.3.6.1.2.1.10.81.3.1.1 |
Dependencies (6) 4 direct · 2 transitive Show tree and compile order Hide dependency details
Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.
Dependency tree
Dependency-first compile order
- SNMPv2-SMIrfc
- SNMPv2-TCrfc
- IANAifType-MIBrfc
- SNMPv2-CONFrfc
- SNMPv2-MIBrfc
- IF-MIBrfc
- DS0-MIBrfcselected
Conformance Groups (1)
|
dsx0Ds0ChannelNumber dsx0RobbedBitSignalling dsx0CircuitIdentifier dsx0IdleCode dsx0SeizedCode dsx0ReceivedCode dsx0TransmitCodesEnable dsx0Ds0BundleMappedIfIndex dsx0ChanMappedIfIndex
A collection of objects providing configuration
information applicable to all DS0 interfaces. |
.1.3.6.1.2.1.10.81.2.1.1
|
Compliance Statements (1)
OID
.1.3.6.1.2.1.10.81.2.2.1The compliance statement for DS0 interfaces.
Required groups
| mandatory | ds0ConfigGroup |
Object refinements
| Object | Access | Syntax | Description |
|---|---|---|---|
| dsx0RobbedBitSignalling | readonly | The ability to set RBS is not required. | |
| dsx0CircuitIdentifier | readonly | The ability to set the circuit identifier is not required. |
|
| dsx0IdleCode | readonly | The ability to set the idle code is not required. |
|
| dsx0SeizedCode | readonly | The ability to set the seized code is not required. |
|
| dsx0TransmitCodesEnable | readonly | The ability to enable and disable the transmitting of idle and seized codes is not required. |