DRAGONWAVE-HORIZON-QUANTUM-MIB Table View

A table of system mode settings

hzQtmSystemModeEntry row .1.3.6.1.4.1.7262.2.4.1.4.3.1

A system mode entry containing all the system mode values

Indexes

hzQtmSystemModeIndex

Column	Syntax	OID
hzQtmSystemModeIndex A unique value for each system mode.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.7262.2.4.1.4.3.1.1
hzQtmSystemModeId System mode Id.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.7262.2.4.1.4.3.1.2
hzQtmSystemModeName The system mode name.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.7262.2.4.1.4.3.1.3
hzQtmSystemModeProgrammed Specifies the operating system mode for the modem. Notes: Only 1 index may be selected. Changing this option requires a system reset.	Enumerationr/w Enumerated Values: 1 active 2 notActive	.1.3.6.1.4.1.7262.2.4.1.4.3.1.4

A table of Hitless Aam.

hzQtmHitlessAamEntry row .1.3.6.1.4.1.7262.2.4.1.7.3.1

Hitless Aam Status and Configurations.

Indexes

hzQtmHitlessAamIndex

Column	Syntax	OID
hzQtmHitlessAamIndex A unique value for each interface.	Enumeration Enumerated Values: 1 wireless-port-1 2 wireless-port-2	.1.3.6.1.4.1.7262.2.4.1.7.3.1.1
hzQtmHitlessAamCurrentMode A read-only string specifing the currently running Hitless AAM Mode.	SNMPv2-TCDisplayString Constraints: range: 0-24 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.7262.2.4.1.7.3.1.2

A table of system upgrade feature groups.

hzQtmSysUpgradeFeatureGroupsEntry row .1.3.6.1.4.1.7262.2.4.1.11.1.1

A system upgrade feature group entry containing all licensed feature groups.

Indexes

hzQtmUpgradeLicensedFeatureIndex

Column	Syntax	OID
hzQtmUpgradeLicensedFeatureIndex A unique value for each licensed group. Please note XPIC, HAAM and BAC feature is only available when system peer link compatibility mode is Quantum.	Enumeration Enumerated Values: 1 xpic 2 bac 3 rlsEcfm 4 hitlessAam 5 dualWirelessPorts 6 l2switch	.1.3.6.1.4.1.7262.2.4.1.11.1.1.1
hzQtmUpgradeLicensedFeatureKey The key required for upgrading a feature.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.7262.2.4.1.11.1.1.2
hzQtmUpgradeLicensedFeatureCount This object indicates the number of times the licensed feature has been changed successfully.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.7262.2.4.1.11.1.1.3

A table of system downgrade system groups.

hzQtmSysDowngradeFeatureGroupsEntry row .1.3.6.1.4.1.7262.2.4.1.11.2.1

A system downgrade feature group entry containing all licensed feature groups.

Indexes

hzQtmDowngradeLicensedFeatureIndex

Column	Syntax	OID
hzQtmDowngradeLicensedFeatureIndex A unique value for each licensed group.	Enumeration Enumerated Values: 1 xpic 2 bac 3 rlsEcfm 4 hitlessAam 5 dualWirelessPorts 6 l2switch	.1.3.6.1.4.1.7262.2.4.1.11.2.1.1
hzQtmDowngradeLicensedFeature Downgrading a licensed feature.	Enumerationr/w Enumerated Values: 1 downgrade	.1.3.6.1.4.1.7262.2.4.1.11.2.1.2
hzQtmDowngradeLicensedFeatureCount This object indicates the number of times the licensed feature has been downgraded.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.7262.2.4.1.11.2.1.3
hzQtmDowngradeLicensedFeatureKey The key generated after downgrading a licensed feature.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.7262.2.4.1.11.2.1.4

A table of omni version of the peer when PLCM mode is configured as Duo

hzQtmPlcmPeerOmniVersionEntry row .1.3.6.1.4.1.7262.2.4.1.13.3.1

A omni version of the peer when PLCM mode is configured as Duo entry containing all the omni version

Indexes

hzQtmPlcmPeerOmniVersionIndex

Column	Syntax	OID
hzQtmPlcmPeerOmniVersionIndex A unique value for each peer omni name.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.7262.2.4.1.13.3.1.1
hzQtmPlcmPeerOmniVersionName The peer omni name.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.7262.2.4.1.13.3.1.2
hzQtmPlcmPeerOmniVersionProgrammed omni version of the peer when PLCM mode is configured as Duo. Notes: Only 1 index may be selected.	Enumerationr/w Enumerated Values: 1 active 2 notActive	.1.3.6.1.4.1.7262.2.4.1.13.3.1.3

A table of Wireless Interface Modems

hzQtmWirelessInterfaceNameEntry row .1.3.6.1.4.1.7262.2.4.5.1.1.1

A Wireless Interface Modem

Indexes

hzQtmWirelessInterfaceNameIndex

Column	Syntax	OID
hzQtmWirelessInterfaceNameIndex A unique value for each interface.	Enumeration Enumerated Values: 1 wireless-port-1 2 wireless-port-2	.1.3.6.1.4.1.7262.2.4.5.1.1.1.1
hzQtmWirelessInterfaceName Describes the functionality of the Wireless Interface	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.7262.2.4.5.1.1.1.2

A table of Wireless Interface Modems

hzQtmModemEntry row .1.3.6.1.4.1.7262.2.4.5.2.1.1

A Wireless Interface Modem

Indexes

hzQtmModemIndex

Column	Syntax	OID
hzQtmModemIndex A unique value for each interface.	Enumeration Enumerated Values: 1 wireless-port-1 2 wireless-port-2	.1.3.6.1.4.1.7262.2.4.5.2.1.1.1
hzQtmModemOperStatus The current operational state of the interface. Testing indicates that no operational packets can be passed.	Enumeration Enumerated Values: 1 up 2 down 3 testing	.1.3.6.1.4.1.7262.2.4.5.2.1.1.2
hzQtmModemChannelizedRSL An estimate of the modem's channelized RSL. Divide the value by 10 to get the actual RSL value. Once this number is divided by 10 the units are dBm. For example -352 is actually -35.2dBm	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.7262.2.4.5.2.1.1.3
hzQtmModemChannelizedRSLUnsignedInt The absolute value of the estimate of the modem's channelized RSL. Divide the value by 10 to get the actual RSL value. Once this number is divided by 10 the units are dBm. For example -352 is actually 35.2dBm	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.7262.2.4.5.2.1.1.4
hzQtmModemModulationType The modulation type of the modem, distinguished according to the physical/link protocol.	Enumeration Enumerated Values: 1 qpsk 2 qam 3 qam16 4 qam32 5 qam64 6 qam128 7 qam256 8 x8psk	.1.3.6.1.4.1.7262.2.4.5.2.1.1.5
hzQtmModemRxSpeed An estimate of the modem's current Rx bandwidth in bits per second. Divide the value by 10000 to get the actual data rate in Mbps	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.7262.2.4.5.2.1.1.6
hzQtmModemTxSpeed An estimate of the modem's current Tx bandwidth in bits per second. Divide the value by 10000 to get the actual data rate in Mbps	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.7262.2.4.5.2.1.1.7
hzQtmModemSNR SNR value in dB. Divide the value by 10 to get the actual SNR.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.7262.2.4.5.2.1.1.8
hzQtmModemEbToNoiseRatio The ratio of the modem Estimated Energy per information bit to Noise power spectral density. Divide the value by 10 to get the actual EbToNoiseRatio	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.7262.2.4.5.2.1.1.9
hzQtmModemEqualizerStress Indicates the average magnitude of all the equalizer taps to provide a measure of how hard the equalizer is working.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.7262.2.4.5.2.1.1.10
hzQtmModemSNRThresholdParameters A read-write string specifing the modem SNR threshold.	SNMPv2-TCDisplayStringr/w Constraints: range: 0-24 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.7262.2.4.5.2.1.1.11
hzQtmModemChannelizedRslBelowThresholdParameters A read-write string: The threshold in dBm and the number of seconds threshold are programmed by the user. An example of the format of the string is as follows: '-75 10'. The first parameter power level in dBm, the seco…	SNMPv2-TCDisplayStringr/w Constraints: range: 0-24 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.7262.2.4.5.2.1.1.12
hzQtmModemXpicEqualizerStress Indicates the average magnitude of all the XPIC equalizer taps to provide a measure of how hard the XPIC equalizer is working.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.7262.2.4.5.2.1.1.13
hzQtmModemXPI The XPI is a measure of the cross-polarization distortion (interference) (named XPD or XPI) with reference to the main received signal level. XPI is calculated as a ratio of XPIC_equalizer_stress to (Main_equalizer_stre…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.7262.2.4.5.2.1.1.14

A table of Wireless Interface Modem Statistics

hzQtmModemStatsEntry row .1.3.6.1.4.1.7262.2.4.5.2.2.1

Statistics for a Wireless Interface Modem

Indexes

hzQtmModemStatsIndex

Column	Syntax	OID
hzQtmModemStatsIndex A unique value for each interface.	Enumeration Enumerated Values: 1 wireless-port-1 2 wireless-port-2 3 secondary-wireless-ports	.1.3.6.1.4.1.7262.2.4.5.2.2.1.1
hzQtmModemTxBlocks The current count of Modem blocks transmitted.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.7262.2.4.5.2.2.1.2
hzQtmModemRxBlocksOKs The current count of Modem blocks received.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.7262.2.4.5.2.2.1.3
hzQtmModemRxBlocksErrors The current count of Modem blocks received in error.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.7262.2.4.5.2.2.1.4

A table of Intermediate Frequency pat(pliu)

hzQtmIntermediateFrequencyEntry row .1.3.6.1.4.1.7262.2.4.5.3.1.1

Intermediate Frequency Card (pliu)

Indexes

hzQtmIFPathIndex

Column	Syntax	OID
hzQtmIFPathIndex A unique value for each path.	Enumeration Enumerated Values: 1 wireless-port-1 2 wireless-port-2	.1.3.6.1.4.1.7262.2.4.5.3.1.1.1
hzQtmIFPathTxLockStatus Indicates if the IF transmit synthesizer is locked.	Enumeration Enumerated Values: 1 unlocked 2 locked	.1.3.6.1.4.1.7262.2.4.5.3.1.1.2
hzQtmIFPathRxLockStatus Indicates if the IF receive synthesizer is locked.	Enumeration Enumerated Values: 1 unlocked 2 locked	.1.3.6.1.4.1.7262.2.4.5.3.1.1.3
hzQtmIFPathLoopbackLockStatus Indicates if the IF loopback synthesizer is locked. The loopback synthesize is used only when the IF loopback is enabled.	Enumeration Enumerated Values: 1 unlocked 2 locked	.1.3.6.1.4.1.7262.2.4.5.3.1.1.4

A table of Wireless Interface Radios

hzQtmRadioEntry row .1.3.6.1.4.1.7262.2.4.5.4.1.1

A Wireless Interface Radio

Indexes

hzQtmRadioIndex

Column	Syntax	OID
hzQtmRadioIndex A unique value for each interface.	Enumeration Enumerated Values: 1 wireless-port-1 2 wireless-port-2	.1.3.6.1.4.1.7262.2.4.5.4.1.1.1
hzQtmRadioDescription A textual string containing information about the radio. Includes the manufacturer, product name, software version, serial number, and hardware version of the radio.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.7262.2.4.5.4.1.1.2
hzQtmRadioOperStatus The current operational state of the interface. Testing indicates that no operational packets can be passed. Testing also indicates that a firmware upgrade may be in progress	Enumeration Enumerated Values: 1 up 2 down 3 testing	.1.3.6.1.4.1.7262.2.4.5.4.1.1.3
hzQtmRadioLastChanged The value of sysUpTime at the time the radio entered its current operational state. If the current state was entered prior to the last re-initialization of the local network management subsystem, then this object conta…	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.7262.2.4.5.4.1.1.4
hzQtmRadioReceiveSignalLevel The Received Signal Level indicates the power of the receive level in dBm. The number is divided by 10 to get the actual dBm. For example, -432 is actually -43.2dBm.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.7262.2.4.5.4.1.1.5
hzQtmRadioReceiveSignalLevelUnsigned The Received Signal Level indicates the power of the receive level in dBm. The number is divided by -10. e.g. 432 is actually -43.2dBm. Object provided to accomodate plotting of negative RSL values which is not supporte…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.7262.2.4.5.4.1.1.6
hzQtmRadioTxGain The gain of the radio in the transmit chain. Indicates the gain in dB.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.7262.2.4.5.4.1.1.7
hzQtmRadioRxGain The gain of the radio in the receive chain. Indicates the gain in dB.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.7262.2.4.5.4.1.1.8
hzQtmRadioReset Writing 1 to this object causes the radio to be reset. All other values are not recognized. This variable always reads back as 0. radioOperStatus should be polled by the user after this object is written to, to verify…	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.7262.2.4.5.4.1.1.9
hzQtmRadioTransmitPowerdBm This defines the programmed transmit level of the radio. The power you see is divided by 10. e.g. A display of 133 is actually 13.3 dBm. Notes: - Programmed and Actual transmit power may differ - see hzQtmRadioActualTra…	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.7262.2.4.5.4.1.1.10
hzQtmRadioPowerOption This indicates the power option of the radio: normal or high power.	Enumeration Enumerated Values: 1 normal 2 highPower	.1.3.6.1.4.1.7262.2.4.5.4.1.1.11
hzQtmRadioTxState This indicates the power option of the radio: normal or high power.	Enumerationr/w Enumerated Values: 1 off 2 on	.1.3.6.1.4.1.7262.2.4.5.4.1.1.12
hzQtmRadioActualTxState This defines the actual transmit state of the radio.	Enumeration Enumerated Values: 1 off 2 on	.1.3.6.1.4.1.7262.2.4.5.4.1.1.13
hzQtmRadioTemperature The Radio temperature in degree Celsius. The actual temperature is determined by dividing the number by 10. e.g. 202 is actually 20.2 degrees Celsius.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.7262.2.4.5.4.1.1.14
hzQtmRadioRxCableLoss The Rx Cable Loss in dB.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.7262.2.4.5.4.1.1.15
hzQtmRadioTxCableLoss The Tx Cable Loss in dB.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.7262.2.4.5.4.1.1.16
hzQtmRadioTxCableLossChange The Tx Cable Loss Change is the difference between the configured TxPower and the measured TxPower measured in dB.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.7262.2.4.5.4.1.1.17
hzQtmRadioMaxTransmitPowerdBm The maximum Transmit Power allowed.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.7262.2.4.5.4.1.1.18
hzQtmRadioActualTransmitPowerdBm This defines the actual transmit level of the radio. The power you see is divided by 10. e.g. A display of 133 is actually 13.3 dBm. This value will be undefined: - If the radio is operational and muted. - If the radio …	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.7262.2.4.5.4.1.1.19

A table of radio bands for Radio 1. Frequency bands are divided into sub bands.
          
i.e. FCC 23 Ghz Band is comprised of fcc23a, fcc23b, fcc23c and
fcc23d which make up the entire FCC23 band

hzQtmRadio1BandEntry row .1.3.6.1.4.1.7262.2.4.5.5.1.2.1

A radio band entry containing all the radio band values

Indexes

hzQtmRadio1BandIndex

Column	Syntax	OID
hzQtmRadio1BandIndex A unique value for each radio band.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.7262.2.4.5.5.1.2.1.1
hzQtmRadio1BandId radio band ID. Note: Changing radio band ID requires a system reset.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.7262.2.4.5.5.1.2.1.2
hzQtmRadio1BandName The radio band name.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.7262.2.4.5.5.1.2.1.3
hzQtmRadio1BandProgrammed Specifies the operating radio band for the modem. ***Only 1 index may be selected in a 1 modem system.	Enumerationr/w Enumerated Values: 1 active 2 notActive	.1.3.6.1.4.1.7262.2.4.5.5.1.2.1.4

A table of txHigh frequency settings for Radio 1

hzQtmRadio1TxHighFreqEntry row .1.3.6.1.4.1.7262.2.4.5.5.1.3.1

A txHighFrequency entry containing all the frequency values

Indexes

hzQtmRadio1TxHighFreqIndex

Column	Syntax	OID
hzQtmRadio1TxHighFreqIndex A unique value for each frequency channel.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.7262.2.4.5.5.1.3.1.1
hzQtmRadio1TxHighFreqChannelIndex The channel index for the frequency.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.7262.2.4.5.5.1.3.1.2
hzQtmRadio1TxHighFreqTransmitRfFrequency The RF TX frequency in KHz.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.7262.2.4.5.5.1.3.1.3
hzQtmRadio1TxHighFreqReceiveRfFrequency The RF RX frequency in KHz.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.7262.2.4.5.5.1.3.1.4
hzQtmRadio1TxHighFreqProgrammed Specifies the operating frequency channel for the modem. Note : For Multi Carrier XPIC configuration it specifies the frequency channel of the Master unit. ***Only 1 index may be selected in a 1 modem system.	Enumerationr/w Enumerated Values: 1 active 2 notActive	.1.3.6.1.4.1.7262.2.4.5.5.1.3.1.5

A table of txLow frequency settings for Radio 1

hzQtmRadio1TxLowFreqEntry row .1.3.6.1.4.1.7262.2.4.5.5.1.4.1

A hzQtmTxLowFrequeny entry containing the frequency values for a specific index

Indexes

hzQtmRadio1TxLowFreqIndex

Column	Syntax	OID
hzQtmRadio1TxLowFreqIndex A unique value for each frequency channel.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.7262.2.4.5.5.1.4.1.1
hzQtmRadio1TxLowFreqChannelIndex The channel index for the frequency.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.7262.2.4.5.5.1.4.1.2
hzQtmRadio1TxLowFreqTransmitRfFrequency The RF TX frequency in KHz.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.7262.2.4.5.5.1.4.1.3
hzQtmRadio1TxLowFreqReceiveRfFrequency The RF RX frequency in KHz.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.7262.2.4.5.5.1.4.1.4
hzQtmRadio1TxLowFreqProgrammed Specifies the operating frequency channel for the modem. Note : For Multi Carrier XPIC configuration it specifies the frequency channel of the Master unit. Notes: Only 1 index may be selected in a 1 modem system. Cha…	Enumerationr/w Enumerated Values: 1 active 2 notActive	.1.3.6.1.4.1.7262.2.4.5.5.1.4.1.5

A table of Radio Bands for Radio 2

hzQtmRadio2BandEntry row .1.3.6.1.4.1.7262.2.4.5.5.2.2.1

A table of radio bands for Radio 2. Frequency bands are divided into sub bands.

i.e. FCC 23 Ghz Band is comprised of fcc23a, fcc23b, fcc23c and
fcc23d which make up the entire FCC23 band

Indexes

hzQtmRadio2BandIndex

Column	Syntax	OID
hzQtmRadio2BandIndex A unique value for each radio band.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.7262.2.4.5.5.2.2.1.1
hzQtmRadio2BandId Radio band ID. Note: Changing radio band ID requires a system reset.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.7262.2.4.5.5.2.2.1.2
hzQtmRadio2BandName The radio band name.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.7262.2.4.5.5.2.2.1.3
hzQtmRadio2BandProgrammed Specifies the operating radio band for the modem. ***Only 1 index may be selected in a 1 modem system.	Enumeration Enumerated Values: 1 active 2 notActive	.1.3.6.1.4.1.7262.2.4.5.5.2.2.1.4

A table of txHigh frequency settings for Radio 2

hzQtmRadio2TxHighFreqEntry row .1.3.6.1.4.1.7262.2.4.5.5.2.3.1

A txHighFrequency entry containing all the frequency values

Indexes

hzQtmRadio2TxHighFreqIndex

Column	Syntax	OID
hzQtmRadio2TxHighFreqIndex A unique value for each frequency channel.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.7262.2.4.5.5.2.3.1.1
hzQtmRadio2TxHighFreqChannelIndex The channel index for the frequency.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.7262.2.4.5.5.2.3.1.2
hzQtmRadio2TxHighFreqTransmitRfFrequency The RF TX frequency in KHz.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.7262.2.4.5.5.2.3.1.3
hzQtmRadio2TxHighFreqReceiveRfFrequency The RF RX frequency in KHz.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.7262.2.4.5.5.2.3.1.4
hzQtmRadio2TxHighFreqProgrammed Specifies the operating frequency channel for the modem. Note : For Multi Carrier XPIC configuration it specifies the frequency channel of the Slave unit. Notes: Only 1 index may be selected in a 1 modem system. C…	Enumerationr/w Enumerated Values: 1 active 2 notActive	.1.3.6.1.4.1.7262.2.4.5.5.2.3.1.5

A table of txLow frequency settings for Radio 2

hzQtmRadio2TxLowFreqEntry row .1.3.6.1.4.1.7262.2.4.5.5.2.4.1

A hzQtmTxLowFrequeny entry containing the frequency values for a specific index

Indexes

hzQtmRadio2TxLowFreqIndex

Column	Syntax	OID
hzQtmRadio2TxLowFreqIndex A unique value for each frequency channel.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.7262.2.4.5.5.2.4.1.1
hzQtmRadio2TxLowFreqChannelIndex The channel index for the frequency.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.7262.2.4.5.5.2.4.1.2
hzQtmRadio2TxLowFreqTransmitRfFrequency The RF TX frequency in KHz.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.7262.2.4.5.5.2.4.1.3
hzQtmRadio2TxLowFreqReceiveRfFrequency The RF RX frequency in KHz.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.7262.2.4.5.5.2.4.1.4
hzQtmRadio2TxLowFreqProgrammed Specifies the operating frequency channel for the modem. Note : For Multi Carrier XPIC configuration it specifies the frequency channel of the Slave unit. Notes: Only 1 index may be selected in a 1 modem system. C…	Enumerationr/w Enumerated Values: 1 active 2 notActive	.1.3.6.1.4.1.7262.2.4.5.5.2.4.1.5

A table of Modem Alarms.

hzQtmModemAlarmsEntry row .1.3.6.1.4.1.7262.2.4.7.4.1.1.1

Modem Alarms

Indexes

hzQtmModemAlarmsIndex

Column	Syntax	OID
hzQtmModemAlarmsIndex A unique value for each interface.	Enumeration Enumerated Values: 1 wireless-port-1 2 wireless-port-2	.1.3.6.1.4.1.7262.2.4.7.4.1.1.1.1
hzQtmModemRxLossOfSignalAlarm Loss of signal lock from the demodulator. The severity is critical, the probable cause is lost synchronization with the far end, and recommended course of action is to check the operational state of both ends of the lin…	Enumeration Enumerated Values: 1 off 2 on	.1.3.6.1.4.1.7262.2.4.7.4.1.1.1.2
hzQtmModemRxLossOfSignalCounts Indicates the approximate number of seconds that this alarm has been active.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.7262.2.4.7.4.1.1.1.3
hzQtmModemTxLossOfSyncAlarm Loss of sync bytes at the input of the modulator. The severity is critical, the probable cause is physical interference in the air link, and recommended course of action is to check the line of site between the horizon …	Enumeration Enumerated Values: 1 off 2 on	.1.3.6.1.4.1.7262.2.4.7.4.1.1.1.4
hzQtmModemTxLossOfSyncCounts Indicates the approximate number of seconds that this alarm has been active.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.7262.2.4.7.4.1.1.1.5
hzQtmModemSnrBelowThresholdAlarm The demodulator SNR performance worse than programmed levels. The severity is major, the probable cause is physical interference in the air link path or misalignment of the radios or severe weather conditions, and recom…	Enumeration Enumerated Values: 1 off 2 on	.1.3.6.1.4.1.7262.2.4.7.4.1.1.1.6
hzQtmModemSnrBelowThresholdCounts Indicates the approximate number of seconds that this alarm has been active.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.7262.2.4.7.4.1.1.1.7
hzQtmModemEqualizerStressExceedThresholdAlarm Equalizer Stress measured within the demodulator exceeds the threshold value.	Enumeration Enumerated Values: 1 off 2 on	.1.3.6.1.4.1.7262.2.4.7.4.1.1.1.8
hzQtmModemEquilizerStressExceedThresholdCounts Indicates the approximate number of seconds that this alarm has been active.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.7262.2.4.7.4.1.1.1.9
hzQtmModemRLSShutdownActivatedAlarm RLS shutdown is activated.	Enumeration Enumerated Values: 1 off 2 on	.1.3.6.1.4.1.7262.2.4.7.4.1.1.1.10
hzQtmModemRLSShutdownActivatedCounts Indicates the approximate time, in seconds, that this alarm has been in the active state	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.7262.2.4.7.4.1.1.1.11
hzQtmModemXPICEquStressExceedThresholdAlarm XPIC Equalizer Stress measured within the demodulator exceeds the threshold value.	Enumeration Enumerated Values: 1 off 2 on	.1.3.6.1.4.1.7262.2.4.7.4.1.1.1.12
hzQtmModemXPICEquStressExceedThresholdCounts Indicates the approximate number of seconds that this alarm has been active.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.7262.2.4.7.4.1.1.1.13

A table of Radio Alarms.

hzQtmRadioAlarmsEntry row .1.3.6.1.4.1.7262.2.4.7.4.2.1.1

Radio Alarms

Indexes

hzQtmRadioAlarmsIndex

Column	Syntax	OID
hzQtmRadioAlarmsIndex A unique value for each radio interface.	Enumeration Enumerated Values: 1 wireless-port-1 2 wireless-port-2	.1.3.6.1.4.1.7262.2.4.7.4.2.1.1.1
hzQtmRadioSynthLostLockAlarm The radio synthesizer has lost lock. The severity is critical, the probable cause is a faulty radio and recommended course of action is to replace the radio unit.	Enumeration Enumerated Values: 1 off 2 on	.1.3.6.1.4.1.7262.2.4.7.4.2.1.1.2
hzQtmRadioSynthLostLockCounts Indicates the approximate number of seconds that this alarm has been active.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.7262.2.4.7.4.2.1.1.3
hzQtmRadioLostCommunicationAlarm RS232 communication lost between IDU and the radio. The severity is critical, the probable cause is a faulty cable between the modem and radio, and recommended course of action is to check the connection.	Enumeration Enumerated Values: 1 off 2 on	.1.3.6.1.4.1.7262.2.4.7.4.2.1.1.4
hzQtmRadioLostCommunicationCounts Indicates the approximate number of seconds that this alarm has been active.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.7262.2.4.7.4.2.1.1.5
hzQtmRadioMismatchAlarm The radio connected to the IDU modem does not match the frequency programmed into the modem unit. The severity is major, the probable cause is an incorrectly programmed modem or an incorrect radio type connected to the …	Enumeration Enumerated Values: 1 off 2 on	.1.3.6.1.4.1.7262.2.4.7.4.2.1.1.6
hzQtmRadioMismatchCounts Indicates the approximate number of seconds that this alarm has been active.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.7262.2.4.7.4.2.1.1.7
hzQtmRadioPowerAmpAlarm The power amplifier on the radio is not operating within normal operating specifications. The severity is critical, the probable cause a faulty radio unit, and recommended course of action is to replace the radio unit.	Enumeration Enumerated Values: 1 off 2 on	.1.3.6.1.4.1.7262.2.4.7.4.2.1.1.8
hzQtmRadioPowerAmpCounts Indicates the approximate number of seconds that this alarm has been active.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.7262.2.4.7.4.2.1.1.9
hzQtmRadioExcessiveTxCableLossAlarm	Enumeration Enumerated Values: 1 off 2 on	.1.3.6.1.4.1.7262.2.4.7.4.2.1.1.10
hzQtmRadioExcessiveTxCableLossCounts Indicates the approximate number of seconds that this alarm has been active.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.7262.2.4.7.4.2.1.1.11
hzQtmRadioRslBelowThresholdAlarm The minimum radio receive signal level threshold has been crossed. The severity is major, the probable cause is physical interference in the air link path or misalignment of the radios or severe weather conditions, and …	Enumeration Enumerated Values: 1 off 2 on	.1.3.6.1.4.1.7262.2.4.7.4.2.1.1.12
hzQtmRadioRslBelowThresholdCounts Indicates the approximate number of seconds that this alarm has been active.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.7262.2.4.7.4.2.1.1.13
hzQtmRadioHighPowerTxDetectorAlarm This applies to High Power Radios only. Indicates minimum power threshold has not been surpassed.	Enumeration Enumerated Values: 1 off 2 on	.1.3.6.1.4.1.7262.2.4.7.4.2.1.1.14
hzQtmRadioHighPowerTxDetectorCounts Indicates the approximate number of seconds that this alarm has been active.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.7262.2.4.7.4.2.1.1.15
hzQtmRadioRedundancySerialNumMismatchAlarm The radio serial number programmed in flash and radio do not match.	Enumeration Enumerated Values: 1 off 2 on	.1.3.6.1.4.1.7262.2.4.7.4.2.1.1.16
hzQtmRadioRedundancySerialNumMismatchCounts Indicates the approximate number of seconds that this alarm has been active.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.7262.2.4.7.4.2.1.1.17
hzQtmRadioExcessiveTxCableLossChangeAlarm Cable loss change exceeds the threshold.	Enumeration Enumerated Values: 1 off 2 on	.1.3.6.1.4.1.7262.2.4.7.4.2.1.1.18
hzQtmRadioExcessiveTxCableLossChangeCounts Indicates the approximate number of seconds that this alarm has been active.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.7262.2.4.7.4.2.1.1.19
hzQtmRadioExcessiveRxCableLossAlarm Rx gain can not be adjusted to desired value.	Enumeration Enumerated Values: 1 off 2 on	.1.3.6.1.4.1.7262.2.4.7.4.2.1.1.20
hzQtmRadioExcessiveRxCableLossCounts Indicates the approximate number of seconds that this alarm has been active.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.7262.2.4.7.4.2.1.1.21
hzQtmRadioAtpcTxAtMaxPowerAlarm ATPC auto-disabled (transmitting at coordinated power).	Enumeration Enumerated Values: 1 off 2 on	.1.3.6.1.4.1.7262.2.4.7.4.2.1.1.22
hzQtmRadioAtpcTxAtMaxPowerCounts Indicates the approximate number of seconds that this alarm has been active.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.7262.2.4.7.4.2.1.1.23
hzQtmRadioSwDownloadFailedAlarm Radio is failing to download the software on startup.	Enumeration Enumerated Values: 1 off 2 on	.1.3.6.1.4.1.7262.2.4.7.4.2.1.1.24
hzQtmRadioSwDownloadFailedCounts Indicates the approximate number of seconds that this alarm has been active.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.7262.2.4.7.4.2.1.1.25
hzQtmRadioDrainCurrentAlarm The drain current on the radio is not operating within normal operating specifications. The severity is critical, the probable cause a faulty radio unit, and recommended course of action is to replace the radio unit.	Enumeration Enumerated Values: 1 off 2 on	.1.3.6.1.4.1.7262.2.4.7.4.2.1.1.26
hzQtmRadioDrainCurrentCounts	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.7262.2.4.7.4.2.1.1.27
hzQtmRadioPowerOffAlarm Radio power is off (potential IF cable short detection).	Enumeration Enumerated Values: 1 off 2 on	.1.3.6.1.4.1.7262.2.4.7.4.2.1.1.28
hzQtmRadioPowerOffCounts Indicates the approximate number of seconds that this alarm has been active.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.7262.2.4.7.4.2.1.1.29

A table of IF Alarms.

hzQtmIFAlarmsEntry row .1.3.6.1.4.1.7262.2.4.7.4.3.1.1

IF Alarms

Indexes

hzQtmIFAlarmsIndex

Column	Syntax	OID
hzQtmIFAlarmsIndex A unique value for each IF path.	Enumeration Enumerated Values: 1 wireless-path-1 2 wireless-path-2	.1.3.6.1.4.1.7262.2.4.7.4.3.1.1.1
hzQtmIFLostLockAlarm The IF synthesizer has lost lock.	Enumeration Enumerated Values: 1 off 2 on	.1.3.6.1.4.1.7262.2.4.7.4.3.1.1.2
hzQtmIFLostLockCounts Indicates the approximate number of seconds that this alarm has been active.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.7262.2.4.7.4.3.1.1.3

Table containing SNMP trap host entries.

hzQtmSnmpTrapHostEntry row .1.3.6.1.4.1.7262.2.4.8.1.1

The snmp trap host entry containing all the trap host information

Indexes

hzQtmSnmpTrapHostIndex

Column	Syntax	OID
hzQtmSnmpTrapHostIndex A unique value for each trap host.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.7262.2.4.8.1.1.1
hzQtmSnmpTrapHostMode Indicates how the snmp trap host is obtained for the system.	Enumeration Enumerated Values: 1 static 2 dns	.1.3.6.1.4.1.7262.2.4.8.1.1.2
hzQtmSnmpTrapHostIpAddress Indicates snmp trap host IP address.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.7262.2.4.8.1.1.3
hzQtmSnmpTrapHostCommunityName The community string name used in Traps.	SNMPv2-TCDisplayString Constraints: range: 0-24 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.7262.2.4.8.1.1.4
hzQtmSnmpTrapHostActivated Specifies whether traps are to be sent to this specific host or not	Enumeration Enumerated Values: 1 notActive 2 active	.1.3.6.1.4.1.7262.2.4.8.1.1.5

Table containing snmp V3 trap host entries

hzQtmSnmpV3TrapHostsEntry row .1.3.6.1.4.1.7262.2.4.8.2.1

Contains the snmp v3 trap host information

Indexes

hzQtmSnmpV3TrapHostsIndex

Column	Syntax	OID
hzQtmSnmpV3TrapHostsIndex A unique value for each v3 trap host.	Integer32 Constraints: range: 0-4	.1.3.6.1.4.1.7262.2.4.8.2.1.1
snmpV3TrapHostIpAddress Indicates snmp trap host IP address.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.7262.2.4.8.2.1.2
snmpV3TrapHostUserName The user name of the v3 trap host.	SNMPv2-TCDisplayString Constraints: range: 0-24 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.7262.2.4.8.2.1.3
snmpV3TrapHostAuthProtocol The authentication alogorithm used by the v3 trap host.	Enumeration Enumerated Values: 1 noAuth 2 md5 3 sha	.1.3.6.1.4.1.7262.2.4.8.2.1.4
snmpV3TrapHostAuthPassword The authentication password of the v3 trap host.	SNMPv2-TCDisplayString Constraints: range: 0-24 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.7262.2.4.8.2.1.5
snmpV3TrapHostPrivProtocol The privacy encryption alogorithm used by the v3 trap host.	Enumeration Enumerated Values: 1 noPriv 2 des	.1.3.6.1.4.1.7262.2.4.8.2.1.6
snmpV3TrapHostPrivPassword The privacy password of the v3 trap host.	SNMPv2-TCDisplayString Constraints: range: 0-24 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.7262.2.4.8.2.1.7
snmpV3TrapHostActivated Specifies whether a specific v3 trap host is allowed to access the system	Enumeration Enumerated Values: 1 notActive 2 active	.1.3.6.1.4.1.7262.2.4.8.2.1.8

Table containing snmp manager entries

hzQtmSnmpManagersEntry row .1.3.6.1.4.1.7262.2.4.9.4.1

Contains the snmp manager information

Indexes

hzQtmSnmpManagersIndex

Column	Syntax	OID
hzQtmSnmpManagersIndex A unique value for each manager.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.7262.2.4.9.4.1.1
hzQtmSnmpManagerIpAddress The IP address of the Manager.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.7262.2.4.9.4.1.2
hzQtmSnmpManagerCommunityName The community string name used by the manager.	SNMPv2-TCDisplayString Constraints: range: 0-24 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.7262.2.4.9.4.1.3
hzQtmSnmpManagerActivated Specifies whether a specific manager is allowed to access the system	Enumeration Enumerated Values: 1 notActive 2 active	.1.3.6.1.4.1.7262.2.4.9.4.1.4

Table containing snmp V3 manager entries

hzQtmSnmpV3ManagersEntry row .1.3.6.1.4.1.7262.2.4.9.5.1

Contains the snmp v3 manager information

Indexes

hzQtmSnmpV3ManagersIndex

Column	Syntax	OID
hzQtmSnmpV3ManagersIndex A unique value for each v3 manager.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.7262.2.4.9.5.1.1
hzQtmSnmpV3ManagerUserName The user name of the v3 Manager.	SNMPv2-TCDisplayString Constraints: range: 0-24 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.7262.2.4.9.5.1.2
hzQtmSnmpV3ManagerAuthProtocol The authentication alogorithm used by the v3 manager.	Enumeration Enumerated Values: 1 noAuth 2 md5 3 sha	.1.3.6.1.4.1.7262.2.4.9.5.1.3
hzQtmSnmpV3ManagerAuthPassword The authentication password of the v3 Manager.	SNMPv2-TCDisplayString Constraints: range: 0-24 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.7262.2.4.9.5.1.4
hzQtmSnmpV3ManagerPrivProtocol The privacy encryption alogorithm used by the v3 manager.	Enumeration Enumerated Values: 1 noPriv 2 des	.1.3.6.1.4.1.7262.2.4.9.5.1.5
hzQtmSnmpV3ManagerPrivPassword The privacy password of the v3 Manager.	SNMPv2-TCDisplayString Constraints: range: 0-24 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.7262.2.4.9.5.1.6
hzQtmSnmpV3ManagerActivated Specifies whether a specific v3 manager is allowed to access the system	Enumeration Enumerated Values: 1 notActive 2 active	.1.3.6.1.4.1.7262.2.4.9.5.1.7

A table of Wireless Interface Radios

hzQtmUserSessionUserEntry row .1.3.6.1.4.1.7262.2.4.10.1.1

A Wireless Interface Radio

Indexes

hzQtmUserSessionUserIndex

Column	Syntax	OID
hzQtmUserSessionUserIndex A unique value for each user.	Enumeration Enumerated Values: 1 user1 2 user2 3 user3 4 user4 5 user5 6 user6 7 user7 8 user8 9 user9 10 user10 11 user11 12 user12 13 user13 14 user14 15 user15 16 user16 17 user17 18 user18 19 user19 20 user20	.1.3.6.1.4.1.7262.2.4.10.1.1.1
hzQtmUserSessionUserName The username of a management session using Telnet or HTTP. The session state variable must be checked to determine if the management session is currently in progress.	SNMPv2-TCDisplayString Constraints: range: 0-32 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.7262.2.4.10.1.1.2
hzQtmUserSessionUserConnectionType Either serial port connection or ethernet connection. Ethernet connection may be through any physical port(s) dedicated to management of the equipment.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.7262.2.4.10.1.1.3
hzQtmUserSessionUserState The state of the session. The session is inProgress if the user is currently logged into the system. The session is terminated if the user has logged out of the system.	Enumeration Enumerated Values: 1 informationNotAvailable 2 sessionTerminated 3 sessionInProgress	.1.3.6.1.4.1.7262.2.4.10.1.1.4

A table of RLS Queue Monitor Parameters

hzQtmRlsDroppedFramesThresholdEntry row .1.3.6.1.4.1.7262.2.4.13.8.1

RLS Queue Parameters

Indexes

hzQtmRlsDroppedFramesThresholdIndex

Column	Syntax	OID
hzQtmRlsDroppedFramesThresholdIndex A unique value for each interface.	Enumeration Enumerated Values: 1 queue-1 2 queue-2 3 queue-3 4 queue-4	.1.3.6.1.4.1.7262.2.4.13.8.1.1
hzQtmRlsAllowedDroppedFrameRateValue Maximum allowed ethernet frame drop rate. If the average drop rate exceeds this threshold in any of the 4 queues, the Ethernet port will be shut down. This feture is availabe only with bothports option	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.7262.2.4.13.8.1.2
hzQtmRlsDroppedFrameMonitorPeriod The monitoring period in seconds.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.7262.2.4.13.8.1.3

A table of RLS Soft Fault Monitor Parameters

hzQtmRlsSoftFaultMonitorEntry row .1.3.6.1.4.1.7262.2.4.13.9.1

RLS Parameters for Soft Fault Monitoring

Indexes

hzQtmRlsSoftFaultMonitorIndex

Column	Syntax	OID
hzQtmRlsSoftFaultMonitorIndex A unique value for each interface.	Enumeration Enumerated Values: 1 wireless-port-1 2 wireless-port-2	.1.3.6.1.4.1.7262.2.4.13.9.1.1
hzQtmRlsEstablishErredFrameThreshold Maximum erred blocks, per sample, allowed for link establishment.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.7262.2.4.13.9.1.2
hzQtmRlsShutdownErredFrameThreshold Minimum erred blocks, per sample, allowed before link shutdown.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.7262.2.4.13.9.1.3
hzQtmRlsEstablishNumberOfSamples Minimum number of consecutive good samples required before link is established.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.7262.2.4.13.9.1.4
hzQtmRlsShutdownNumberOfSamples Minimum number of consecutive erred samples before link is shutdown.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.7262.2.4.13.9.1.5
hzQtmRlsEstablishSamplePeriod Period of Time, in milliseconds, for monitoring Establish Erred Frame Threshold.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.7262.2.4.13.9.1.6
hzQtmRlsShutdownSamplePeriod Period of Time, in milliseconds, for monitoring Shutdown Erred Frame Threshold.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.7262.2.4.13.9.1.7
hzQtmRlsQuickShutdownSamplePeriod Minimum number of milliseconds required to classify samples as erred.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.7262.2.4.13.9.1.8

A table of RLS Hard Fault Monitor Parameters

hzQtmHardFaultMonitorEntry row .1.3.6.1.4.1.7262.2.4.13.10.1

RLS Parameters for Hard Fault Monitoring

Indexes

hzQtmHardFaultMonitorIndex

Column	Syntax	OID
hzQtmHardFaultMonitorIndex A unique value for each interface.	Enumeration Enumerated Values: 1 wireless-port-1 2 wireless-port-2	.1.3.6.1.4.1.7262.2.4.13.10.1.1
hzQtmRlsHardFaultSamplePeriod The period of time, in milliseconds, for which the rlsFaultThreshold is applied.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.7262.2.4.13.10.1.2
hzQtmRlsHardFaultThreshold Acceptalbe errored block rate in percent	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.7262.2.4.13.10.1.3

A table of RLS RSL Monitor Parameters

hzQtmRlsReceiveSignalLevelMonitorEntry row .1.3.6.1.4.1.7262.2.4.13.11.1

RLS RSL Monitor Parameters

Indexes

hzQtmRlsReceiveSignalLevelMonitorIndex

Column	Syntax	OID
hzQtmRlsReceiveSignalLevelMonitorIndex A unique value for each interface.	Enumeration Enumerated Values: 1 wireless-port-1 2 wireless-port-2	.1.3.6.1.4.1.7262.2.4.13.11.1.1
hzQtmRlsMakeRslMonitorRslValue The RSL threshold, in dBm. When Link is inactive and if RSL is higher than this threshold for a desired period, the link will become active.	SNMPv2-TCDisplayStringr/w Constraints: range: 0-24 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.7262.2.4.13.11.1.2
hzQtmRlsMakeRslMonitorPeriod The desired period, in seconds. When Link is inactive and if RSL is higher than the desiredthreshold for this period, the link will become active.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.7262.2.4.13.11.1.3

A table of RLS Currently Observed Queue Monitor Parameters

hzQtmRlsCurrentDroppedFramesEntry row .1.3.6.1.4.1.7262.2.4.13.12.1.1

RLS Currently Observed Queue Monitor Parameters

Indexes

hzQtmRlsCurrentDroppedFramesIndex

Column	Syntax	OID
hzQtmRlsCurrentDroppedFramesIndex A unique value for each interface.	Enumeration Enumerated Values: 1 queue-1 2 queue-2 3 queue-3 4 queue-4	.1.3.6.1.4.1.7262.2.4.13.12.1.1.1
hzQtmRlsCurrentDroppedFramesRateValue RLS Current Ethernet Frame drop rate	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.7262.2.4.13.12.1.1.2
hzQtmRlsCurrentDroppedFrameMonitorPeriod Queue Monitoring time	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.7262.2.4.13.12.1.1.3
hzQtmRlsCurrentQueueStatus Queue Status - OK: drop rate is within the threshold, Activated: Exceeded the drop threshold	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.7262.2.4.13.12.1.1.4

A table of RLS Parameters and states

hzQtmRlsStatusEntry row .1.3.6.1.4.1.7262.2.4.13.12.2.1

RLS Parameters and states

Indexes

hzQtmRlsStatusIndex

Column	Syntax	OID
hzQtmRlsStatusIndex A unique value for each interface.	Enumeration Enumerated Values: 1 wireless-port-1 2 wireless-port-2	.1.3.6.1.4.1.7262.2.4.13.12.2.1.1
hzQtmRlsOption RLS Option. On Basic: RLS enabled with base degrade monitoring; On Advanced: RLS enabled with hard fault monitoring; On Anyport: If any one of the wireless links exceeds the threshold Ehternet Port will be shut down On …	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.7262.2.4.13.12.2.1.2
hzQtmRlsState Rapid Link Shutdown State. If the state is activated, that means The wireless link is down for Ethernet traffic; If the state is inactivated, that means that wireless link is up for Ethernet traffic.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.7262.2.4.13.12.2.1.3
hzQtmRlsMismatchState RLS Mismatch State. If the state is activated, that means RLS configuration is mismatched with peer. If the state is OK, that means RLS configuration is matched with peer.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.7262.2.4.13.12.2.1.4
hzQtmDegradeMonitorState Degrade Monitor State. If the state is activated, that means the RLS Degrade Monitor is asserting the link down. If the state is OK, that means the RLS Degrade Monitor is asserting the link up.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.7262.2.4.13.12.2.1.5
hzQtmHardFaultMonitorState Hard Fault Monitor State. If the state is activated, that means the Hard Fault Monitor is asserting the link down. If the state is OK, that means the RLS Hard Fault Monitor is asserting the link up.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.7262.2.4.13.12.2.1.6
hzQtmMakeRslThresholdState Make RSL Threshold State. If the state is not met, that means the RLS signal level is below the threshold value. If the state is OK, that means the RLS signal level is above the threshold value.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.7262.2.4.13.12.2.1.7
hzQtmPeerRlsState Peer RLS State. If the state is activated, that means the peer has activated RLS. If the state is OK, that means the Peer hasn't activated RLS.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.7262.2.4.13.12.2.1.8
hzQtmRadioInterfaceState Radio Interface State. If the state is down, that means The radio interface is not operational(muted,disconnected, not configured). If the state is up, that means the radio interface is operational.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.7262.2.4.13.12.2.1.9
hzQtmNetworkInterfaceState Network Interface State. If the state is down, that means the network interface (Ethernet/PHY) is not operational(disconnected, not configured). If the state is up, that means the network interface (Ethernet/PHY) is ope…	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.7262.2.4.13.12.2.1.10
hzQtmUserConfiguredEstablishFer User Configured Establish Frame Error Ratio required for the link to be restored to service, set by the user. An example value being '1.0E-7'.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.7262.2.4.13.12.2.1.11
hzQtmMinimumAchievableEstablishFer Minimum achievable Frame Error Ratio required for the link to be restored to service. An example value being '1.0E-7'.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.7262.2.4.13.12.2.1.12
hzQtmUserConfiguredShutdownFer User Configured Shutdown Frame Error Ratio required for the link to remain in-service, set by the user. An example value being '1.0E-7'.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.7262.2.4.13.12.2.1.13
hzQtmMinimumAchievableShutdownFer Minimum achievable Frame Error Ratio required for the link to remain in-service. An example value being '1.0E-7'.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.7262.2.4.13.12.2.1.14
hzQtmUserConfiguredEstablishMonitorTime User Configured Establish Monitor Time, in milliseconds, for which the 'User Configured Establish FER' must be achieved to bring link into service, set by user	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.7262.2.4.13.12.2.1.15
hzQtmActualEstablishMonitorTime Actual Establish Monitor Time, in milliseconds, for which the 'User Configured Establish FER'must be achieved to bring link into service, it's a multiple of the establish sample period required to observe the FER	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.7262.2.4.13.12.2.1.16
hzQtmUserConfiguredShutdownMonitorTime User Configured Shutdown Monitor Time, in milliseconds, for which the 'User Configured Shutdown FER' must be met for the link to remain in-service, set by user.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.7262.2.4.13.12.2.1.17
hzQtmActualShutdownMonitorTime Actual Shutdown Monitor Time, in milliseconds, for which the 'User Configured Shutdown FER' must be met for the link to remain in-service, it's a multiple of the shutdown sample period required to observe the FER	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.7262.2.4.13.12.2.1.18