DOS-PREV-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
1
Rows
1
Columns
7

swDoSCtrlTable

table
.1.3.6.1.4.1.171.12.59.1.3 · 1 row entry · 7 columns
Open in standard view
Uses the d-link variant from /opt/observium/mibs/d-link.
Command help
Walk swDoSCtrlTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DOS-PREV-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DOS-PREV-MIB::swDoSCtrlTable' 
A table that holds the DoS prevention settings of the device.
swDoSCtrlEntry row .1.3.6.1.4.1.171.12.59.1.3.1
A list of DoS prevention settings of the device.
Indexes
Column Syntax OID
swDoSCtrlType
This object indicates the DoS prevention type.
Enumeration
Enumerated Values:
1land-attack
2blat-attack
3smurf-attack
4tcp-null-scan
5tcp-xmascan
6tcp-synfin
7tcp-syn-srcport-less-1024
10arp-mac-sa-mismatch
11fraggle-attack
12icmp-redirect-attack
13icmp-unreachable-attack
14ip-route-record-attac
15ip-source-route-attack
16ping-death-attack
17tcp-flag-synrst
18tcp-over-mac-mcbc
19tcp-syn-with-data
20tcp-tiny-frag-attack
21tcpudp-port-zero
22tracert-attack
23winnuke-attack
 .1.3.6.1.4.1.171.12.59.1.3.1.1
swDoSCtrlState
This object indicates the status of the DoS prevention type.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.171.12.59.1.3.1.2
swDoSCtrlActionType
This object indicates the action for the DoS prevention type.
If this object is set to 'mirror' and swDoSCtrlState is set to 'enable', the configuration
will not take effect until a valid mirror port is specified. If …
Enumerationr/w
Enumerated Values:
1drop
2mirror
 .1.3.6.1.4.1.171.12.59.1.3.1.3
swDoSCtrlMirrorPort
This object indicates the port to which the attack packet will be forwarded.
A value of 0 means that the DoS prevention action type is either not set to 'mirror'.
or the 'mirror' DoS action is not active. When swDoSCtrl…
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.171.12.59.1.3.1.4
swDoSCtrlMirrorPriority
This object configures the priority of the detected packet.
Valid priority values are from 0 to 7. The value 8 indicates that there will be
no change in the priority of the DoS attack packet as it is forwarded to the
mi…
Integer32r/w
Constraints:
range: 0-8
 .1.3.6.1.4.1.171.12.59.1.3.1.5
swDoSCtrlMirrorRxRate
This object indicates the rate of reception of DoS attack packets.
The valid values are 64 to 1024000.
A value of 0 indicates that the rate has no limit. The default value is 0.
A valid mirror port must first be specifi…
Integer32r/w
Constraints:
range: 0-1024000
 .1.3.6.1.4.1.171.12.59.1.3.1.6
swDoSCtrlFrameCount
This object indicates the number of frames detected under the DoS prevention type.
A valid mirror port must first be specified in order to set this value.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.12.59.1.3.1.7