DOCS-DIAG-MIB
This is the MIB Module for the Diagnostic Log for
DOCSIS-compliant Cable Modem Termination Systems (CMTS).
The purpose of the Diagnostic Log is to prevent service
interruptions by early detection of potential problems.
It can also be used for fault management and for
troubleshooting the cable network.
The Diagnostic Log contains Cable Modems that show certain
potential problematic behaviors, as determined by the CMTS.
These detection criteria are defined as diagnostictriggers.
The diagnostic trigger is an information filter to avoid
inundating a management agent with data which is less
meaningful as a function of size.
There are 2 diagnostic triggers defined. Each trigger
maintains a counter for each Cable Modem that is caught
by that trigger.
(1) Registration Trigger
(2) Ranging Retry Trigger
Copyright 1999-2007 Cable Television Laboratories, Inc.
All rights reserved.
- Source file
DOCS-DIAG-MIB- Last revised
- Identity
docsDiagMib- Base OID
1.3.6.1.4.1.4491.2.1.9
Imported Objects
| CLAB-DEF-MIB | clabProjDocsis |
| DOCS-CABLE-DEVICE-MIB | docsDevEvId docsDevEvLevel |
| DOCS-IF3-MIB | CmtsCmRegState docsIf3CmtsCmRegStatusId |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE (no object page) NOTIFICATION-GROUP (no object page) OBJECT-GROUP (no object page) |
| SNMPv2-SMI | Counter32 Gauge32 MODULE-IDENTITY (no object page) NOTIFICATION-TYPE (no object page) OBJECT-TYPE (no object page) Unsigned32 |
| SNMPv2-TC | DateAndTime MacAddress TEXTUAL-CONVENTION (no object page) TruthValue |
Net-SNMP examples using the rfc MIB directory Show commands
These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.
Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'DOCS-DIAG-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'DOCS-DIAG-MIB::docsDiagMib'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DOCS-DIAG-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DOCS-DIAG-MIB::docsDiagMib'
Objects (39)
Showing 39 of 39 objects
Object legend
Object type
Icons distinguish tables, entry rows, columns, scalars, and structural nodes.
SNMPv2-TCTruthValue
Syntax
Blue badges identify the value syntax. Connected badges read as defining module and convention.
IF-MIBifIndex
Table index
Green identifies an index object; yellow names its module when the index is defined elsewhere.
r/w
deprecated
obsolete
Access and status
r/w means read-write. Grey labels mark definitions retained for compatibility.
OBS ✓
Observium use
The indicator appears only when Observium directly references that object.
ifOperStatus
.1.3.6.1.2.1…
Names and OIDs
Object names link to their detail pages. Hover or focus a linked name or badge for available definition details.
.1.3.6.1.4.1.4491.2.1.9 |
||
.1.3.6.1.4.1.4491.2.1.9.0 |
||
.1.3.6.1.4.1.4491.2.1.9.1 |
||
.1.3.6.1.4.1.4491.2.1.9.1.1 |
||
|
entriesUnsigned32
|
.1.3.6.1.4.1.4491.2.1.9.1.1.1 |
|
|
Bits
|
.1.3.6.1.4.1.4491.2.1.9.1.1.10 |
|
|
entriesUnsigned32
|
.1.3.6.1.4.1.4491.2.1.9.1.1.2 |
|
|
entriesUnsigned32
|
.1.3.6.1.4.1.4491.2.1.9.1.1.3 |
|
|
entriesUnsigned32
|
.1.3.6.1.4.1.4491.2.1.9.1.1.4 |
|
|
|
minutesUnsigned32
|
.1.3.6.1.4.1.4491.2.1.9.1.1.5 |
.1.3.6.1.4.1.4491.2.1.9.1.1.6 |
||
.1.3.6.1.4.1.4491.2.1.9.1.1.7 |
||
.1.3.6.1.4.1.4491.2.1.9.1.1.8 |
||
.1.3.6.1.4.1.4491.2.1.9.1.1.9 |
||
.1.3.6.1.4.1.4491.2.1.9.1.2 |
||
.1.3.6.1.4.1.4491.2.1.9.1.2.1 |
||
.1.3.6.1.4.1.4491.2.1.9.1.2.2 |
||
|
secondsUnsigned32
|
.1.3.6.1.4.1.4491.2.1.9.1.2.3 |
|
.1.3.6.1.4.1.4491.2.1.9.1.2.4 |
||
|
Enumeration
|
.1.3.6.1.4.1.4491.2.1.9.1.2.5 |
|
|
Unsigned32
|
.1.3.6.1.4.1.4491.2.1.9.1.2.6 |
|
|
Unsigned32
|
.1.3.6.1.4.1.4491.2.1.9.1.2.7 |
|
.1.3.6.1.4.1.4491.2.1.9.1.3 |
||
.1.3.6.1.4.1.4491.2.1.9.1.3.1 |
||
.1.3.6.1.4.1.4491.2.1.9.1.3.1.1 |
||
.1.3.6.1.4.1.4491.2.1.9.1.3.1.2 |
||
.1.3.6.1.4.1.4491.2.1.9.1.3.1.3 |
||
.1.3.6.1.4.1.4491.2.1.9.1.3.1.4 |
||
.1.3.6.1.4.1.4491.2.1.9.1.3.1.5 |
||
.1.3.6.1.4.1.4491.2.1.9.1.3.1.6 |
||
.1.3.6.1.4.1.4491.2.1.9.1.4 |
||
.1.3.6.1.4.1.4491.2.1.9.1.4.1 |
||
.1.3.6.1.4.1.4491.2.1.9.1.4.1.1 |
||
.1.3.6.1.4.1.4491.2.1.9.1.4.1.2 |
||
.1.3.6.1.4.1.4491.2.1.9.1.4.1.3 |
||
.1.3.6.1.4.1.4491.2.1.9.1.4.1.4 |
||
.1.3.6.1.4.1.4491.2.1.9.2 |
||
.1.3.6.1.4.1.4491.2.1.9.2.1 |
||
.1.3.6.1.4.1.4491.2.1.9.2.2 |
Dependencies (25) 7 direct · 18 transitive Show tree and compile order Hide dependency details
Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.
Dependency tree
Dependency-first compile order
- SNMPv2-SMIrfc
- SNMPv2-TCrfc
- IANAifType-MIBrfc
- SNMPv2-CONFrfc
- SNMPv2-MIBrfc
- IF-MIBrfc
- INET-ADDRESS-MIBrfc
- SNMP-FRAMEWORK-MIBrfc
- DOCS-IETF-BPI2-MIBrfc
- CLAB-DEF-MIBrfc
- DIFFSERV-DSCP-TCrfc
- INTEGRATED-SERVICES-MIBrfc
- DIFFSERV-MIBrfc
- RMON-MIBrfc
- RFC-1212rfc
- RFC1155-SMIrfc
- RFC1213-MIBrfc
- RFC1271-MIBrfc
- TOKEN-RING-RMON-MIBrfc
- RMON2-MIBrfc
- DOCS-CABLE-DEVICE-MIBrfc
- CLAB-TOPO-MIBrfc
- DOCS-IF-MIBrfc
- SNMP-TARGET-MIBrfc
- DOCS-IF3-MIBrfc
- DOCS-DIAG-MIBrfcselected
Type Definitions (2)
| Bits |
other(0)initialRanging(1)rangingAutoAdjComplete(2)startEae(3)startDhcpv4(4)startDhcpv6(5)dhcpv4Complete(6)dhcpv6Complete(7)startConfigFileDownload(8)configFileDownloadComplete(9)startRegistration(10)registrationCmplete(11)bpiInit(12)operational(13) |
|
| Bits |
registration(0)rangingRetry(1) |
Conformance Groups (2)
|
docsDiagLogMaxSize docsDiagLogCurrentSize docsDiagLogNotifyLogSizeHighThrshld docsDiagLogNotifyLogSizeLowThrshld docsDiagLogAging docsDiagLogResetAll docsDiagLogLastResetTime docsDiagLogClearAll docsDiagLogLastClearTime docsDiagLogNotifCtrl docsDiagLogIncludeTriggers docsDiagLogEnableAgingTriggers docsDiagLogRegTimeInterval docsDiagLogRegDetail docsDiagLogRangingRetryType docsDiagLogRangingRetryThrhld docsDiagLogRangingRetryStationMaintNum docsDiagLogCmMacAddr docsDiagLogLastUpdateTime docsDiagLogCreateTime docsDiagLogLastRegTime docsDiagLogRegCount docsDiagLogRangingRetryCount docsDiagLogDetailCount docsDiagLogDetailLastUpdate docsDiagLogDetailLastErrorText
CMTS is required to support objects in this group
|
.1.3.6.1.4.1.4491.2.1.9.2.2.1
|
|
|
CMTS is required to support objects in this group
|
.1.3.6.1.4.1.4491.2.1.9.2.2.2
|
Compliance Statements (1)
OID
.1.3.6.1.4.1.4491.2.1.9.2.1.1The compliance statement for the diagnostic log MIB for
DOCSIS compliant Cable Modem Termination Systems
DOCSIS compliant Cable Modem Termination Systems
Required groups
| optional | docsDiagLogBaseGroup | Mandatary in all CMTSes |
| optional | docsDiagLogNotificationGroup | Mandatary in all CMTSes |
Notifications / Traps (3)
| Name | OID | Description |
|---|---|---|
.1.3.6.1.4.1.4491.2.1.9.0.1 |
This notification indicates that the current size of
Diagnostic Log grows beyond docsDiagLogNotifyLogSizeHighThrshld. |
|
.1.3.6.1.4.1.4491.2.1.9.0.2 |
This notification indicates that the current size of
Diagnostic Log drops to docsDiagLogNotifyLogSizeLowThrshld after it exceeded docsDiagLogNotifyLogSizeHighThrshld earlier. |
|
.1.3.6.1.4.1.4491.2.1.9.0.3 |
This notification indicates that the Diagnostic Log is
full. |