DOCS-CABLE-DEVICE-TRAP-MIB

Modified by David Raftus (david.raftus@imedia.com) to
deprecate trap definition objects originating from
the docsIfExt MIB. Corresponding objects from the
Docsis 2.0 RF MIB draft were added to the trap
definitions.

Imported Objects

docsDevNotification, docsDevServerTime, docsDevServerDhcp, docsDevSwServer, docsDevSwFilename, docsDev, docsDevEvLevel, docsDevEvId, docsDevEvTextDOCS-CABLE-DEVICE-MIB
docsIfCmtsCmStatusDocsisMode, docsIfDocsisCapability, docsIfDocsisOperModeDOCS-IF-EXT-MIB
docsIfCmtsCmStatusDocsisRegMode, docsIfCmtsCmStatusModulationType, docsIfCmCmtsAddress, docsIfCmtsCmStatusMacAddress, docsIfDocsisBaseCapability, docsIfCmStatusDocsisOperMode, docsIfCmStatusModulationTypeDOCS-IF-MIB
ifPhysAddressIF-MIB
OBJECT-GROUP, NOTIFICATION-GROUP, MODULE-COMPLIANCESNMPv2-CONF
OBJECT-TYPE, NOTIFICATION-TYPE, MODULE-IDENTITYSNMPv2-SMI

Objects

docsDevTrapMIB .1.3.6.1.2.1.69.10
docsDevTraps .1.3.6.1.2.1.69.2.1
docsDevTrapControl .1.3.6.1.2.1.69.2.1.1
docsDevCmTrapControl .1.3.6.1.2.1.69.2.1.1.1
docsDevCmtsTrapControl .1.3.6.1.2.1.69.2.1.1.2
docsDevCmTraps .1.3.6.1.2.1.69.2.1.2.0
docsDevCmtsTraps .1.3.6.1.2.1.69.2.1.3.0
docsDevTrapConformance .1.3.6.1.2.1.69.2.1.4
docsDevTrapGroups .1.3.6.1.2.1.69.2.1.4.1
docsDevTrapCompliances .1.3.6.1.2.1.69.2.1.4.2

Notifications/Traps

NameOIDDescription
docsDevCmInitTLVUnknownTrap










.1.3.6.1.2.1.69.2.1.2.0.1
to detection of unknown TLV during
the TLV parsing process.
The values of docsDevEvLevel, docsDevId, and
docsDevEvText are from the entry which logs this event
in the docsDevEventTable. The docsIfDocsisBaseCapability
indicates the DOCSIS version information. The docsIfCmStatusDocsisOperMode indicates the QOS level of the CM, while the docsIfCmStatusModulationType indicates the upstream modulation methodology used by the CM.
The ifPhysAddress value is the MAC address of the cable interface of this cable modem.
The docsIfCmCmtsAddress specifies the MAC address
of the CMTS to which the CM is connected (if there is a cable
card/ interface in the CMTS, then it is actually the MAC address of the cable
interface which connected to the CM).
This part of information is uniformed across all CM traps.
docsDevCmSwUpgradeFailTrap












.1.3.6.1.2.1.69.2.1.2.0.10
o report the failure of a software upgrade
attempt. The values of docsDevSwFilename, and
docsDevSwServer indicate the software image name
and the server IP address the image is from.
docsDevCmSwUpgradeSuccessTrap












.1.3.6.1.2.1.69.2.1.2.0.11
o report the Software upgrade success event.
The values of docsDevSwFilename, and
docsDevSwServer indicate the software image name
and the server IP address the image is from.
docsDevCmSwUpgradeCVCFailTrap










.1.3.6.1.2.1.69.2.1.2.0.12
o report the failure of the verification
of code file happened during a secure software upgrade
attempt.
docsDevCmTODFailTrap











.1.3.6.1.2.1.69.2.1.2.0.13
o report the failure of a time of day server.
The value of docsDevServerTime indicates the server IP
address.
docsDevCmDCCReqFailTrap










.1.3.6.1.2.1.69.2.1.2.0.14
o report the failure of a dynamic channel
change request happened during the dynamic channel
change process in the CM side.
docsDevCmDCCRspFailTrap










.1.3.6.1.2.1.69.2.1.2.0.15
o report the failure of a dynamic channel
change response happened during the dynamic channel
change process in the CM side.
docsDevCmDCCAckFailTrap










.1.3.6.1.2.1.69.2.1.2.0.16
o report the failure of a dynamic channel
change acknowledgement happened during the dynamic channel
change process in the CM side.
docsDevCmDynServReqFailTrap










.1.3.6.1.2.1.69.2.1.2.0.2
o report the failure of a dynamic service
request happened during the dynamic services process.
docsDevCmDynServRspFailTrap










.1.3.6.1.2.1.69.2.1.2.0.3
o report the failure of a dynamic service
response happened during the dynamic services process.
docsDevCmDynServAckFailTrap










.1.3.6.1.2.1.69.2.1.2.0.4
o report the failure of a dynamic service
acknowledgement happened during the dynamic services process.
docsDevCmBpiInitTrap










.1.3.6.1.2.1.69.2.1.2.0.5
o report the failure of a BPI initialization
attempt happened during the registration process.
docsDevCmBPKMTrap










.1.3.6.1.2.1.69.2.1.2.0.6
An event to report the failure of a BPKM operation.
docsDevCmDynamicSATrap










.1.3.6.1.2.1.69.2.1.2.0.7
o report the failure of a dynamic security
association operation.
docsDevCmDHCPFailTrap











.1.3.6.1.2.1.69.2.1.2.0.8
o report the failure of a DHCP server.
The value of docsDevServerDhcp is the IP address
of the DHCP server.
docsDevCmSwUpgradeInitTrap












.1.3.6.1.2.1.69.2.1.2.0.9
o report a software upgrade initiated
event. The values of docsDevSwFilename, and
docsDevSwServer indicate the software image name
and the server IP address the image is from.
docsDevCmtsInitRegReqFailTrap










.1.3.6.1.2.1.69.2.1.3.0.1
o report the failure of a registration
request from CM happening during the CM initialization
process and detected on the CMTS side. The values of
docsDevEvLevel, docsDevId, and docsDevEvText are from
the entry which logs this event in the
docsDevEventTable. The docsIfCmtsCmStatusDocsisRegMode
and docsIfCmtsCmStatusMacAddress indicate the docsis
QOS version and the MAC address of the requesting CM.
The docsIfCmtsCmModulationType indicates the upstream
modulation methodology used by the connected CM.
The docsIfDocsisBaseCapability and ifPhysAddress
indicate the docsis version of the CMTS and the MAC
address of the CMTS (if there is a cable card/ interface
in the CMTS, then it is actually the MAC address of the
cable interface which connected to the CM) cable card
connected to the CM. This part of information is
uniformed across all CMTS traps.
docsDevCmtsDCCReqFailTrap










.1.3.6.1.2.1.69.2.1.3.0.10
o report the failure of a dynamic channel
change request happened during the dynamic channel
change process in the CM side and detected in the
CMTS side.
docsDevCmtsDCCRspFailTrap










.1.3.6.1.2.1.69.2.1.3.0.11
o report the failure of a dynamic channel
change response happened during the dynamic channel
change process in the CMTS side.
docsDevCmtsDCCAckFailTrap










.1.3.6.1.2.1.69.2.1.3.0.12
o report the failure of a dynamic channel
change acknowledgement happened during the dynamic channel
change process in the CMTS side.
docsDevCmtsInitRegRspFailTrap










.1.3.6.1.2.1.69.2.1.3.0.2
o report the failure of a registration
response happened during the CM initialization
process and detected in the CMTS side.
docsDevCmtsInitRegAckFailTrap










.1.3.6.1.2.1.69.2.1.3.0.3
o report the failure of a registration
acknowledgement from CM happened during the CM
initialization process and detected in the CMTS side.
docsDevCmtsDynServReqFailTrap










.1.3.6.1.2.1.69.2.1.3.0.4
o report the failure of a dynamic service
request happened during the dynamic services process
and detected in the CMTS side.
docsDevCmtsDynServRspFailTrap










.1.3.6.1.2.1.69.2.1.3.0.5
o report the failure of a dynamic service
response happened during the dynamic services process
and detected in the CMTS side.
docsDevCmtsDynServAckFailTrap










.1.3.6.1.2.1.69.2.1.3.0.6
o report the failure of a dynamic service
acknowledgement happened during the dynamic services
process and detected in the CMTS side.
docsDevCmtsBpiInitTrap










.1.3.6.1.2.1.69.2.1.3.0.7
o report the failure of a BPI initialization
attempt happened during the CM registration process
and detected in the CMTS side.
docsDevCmtsBPKMTrap










.1.3.6.1.2.1.69.2.1.3.0.8
o report the failure of a BPKM operation
which is detected in the CMTS side.
docsDevCmtsDynamicSATrap










.1.3.6.1.2.1.69.2.1.3.0.9
o report the failure of a dynamic security
association operation which is detected in the CMTS side.