DMswitch-MIB Table View

Table of descriptive and status information about
switches in this system.

switchInfoEntry row .1.3.6.1.4.1.3709.3.5.201.1.1.2.1

An entry in the table, containing information
about a single switch in this system.

Indexes

swUnitIndex

Column	Syntax	OID
swUnitIndex This object identifies the switch within the system for which this entry contains information. This value can never be greater than switchNumber.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3709.3.5.201.1.1.2.1.1
swHardwareVer Hardware version of the main board.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3709.3.5.201.1.1.2.1.2
swBootLoaderVer Loader version of the main board.	OctetString Constraints: range: 0-20	.1.3.6.1.4.1.3709.3.5.201.1.1.2.1.3
swFirmwareVer Operation code version of the main board.	OctetString Constraints: range: 0-20	.1.3.6.1.4.1.3709.3.5.201.1.1.2.1.4
swPortNumber The total port number of this switch (including expansion slot).	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3709.3.5.201.1.1.2.1.5
swPowerStatus Indicates the switch using internalPower(1), redundantPower(2), internalAndRedundantPower(3) or externalPower(4)	Enumeration Enumerated Values: 1 internalPower 2 redundantPower 3 internalAndRedundantPower 4 externalPower	.1.3.6.1.4.1.3709.3.5.201.1.1.2.1.6
swRoleInSystem Indicates the switch is master(1), backupMaster(2) or slave(3) in this system.	Enumeration Enumerated Values: 1 master 2 backupMaster 3 slave	.1.3.6.1.4.1.3709.3.5.201.1.1.2.1.7
swSerialNumber Serial number of the switch.	OctetString Constraints: range: 0-80	.1.3.6.1.4.1.3709.3.5.201.1.1.2.1.8
swProdName	OctetString Constraints: range: 0-127	.1.3.6.1.4.1.3709.3.5.201.1.1.2.1.9
swProdModelId Product model identifier.	Enumeration Enumerated Values: 1 dmSwitch2204G1 2 dmSwitch2304G1 3 dmSwitch3224F1 4 dmSwitch3324F1 5 dmSwitch3224F2 6 dmSwitch3324F2 7 dmSwitch3224F3 8 dmSwitch3324F3 9 mpu192 10 mpu384 11 eth12gx 12 eth24gx 13 eth1x10gx 14 eth2x10gx 15 eth12gxEth1x10gx 16 eth24gt 17 eth48gt 20 eth24gxEth2x10gx 21 eth48gx 22 eth4x10gxhseries 23 eth24gxEth2x10gxhseries 24 eth48gxhseries 25 eth24gxhseries 26 eth2x10gxhseries 27 eth10gx32xe1 28 eth10gx4xstm1 29 eth10gx2xstm4 30 mpu512 31 eth24gxlseries 32 eth24gx4gx 33 eth24gx2xx 34 eth24gxs 35 eth24gx2xxs 36 eth24gx4xx 37 eth20gt4gc 38 eth20gt4gc2xx 39 eth20gt4gcs 40 eth20gt4gc2xxs 41 eth20gt4gc4xx 42 eth44gt4gc 43 eth44gt4gc2xx 44 eth44gt4gcs 45 eth44gt4gc2xxs 46 eth44gt4gc4xx 47 eth44gt4gc2xs 48 eth44gt4gc2xss 49 eth44gt4gc4xs 50 eth24gthseries 51 eth48gthseries 52 eth20gt4gc2xss 53 eth20gx32xe1hseries 54 eth20gx2x10gx32xe1hseries 55 eth16gx2x10gx4xstm1hseries 56 eth16gx4xstm1hseries 57 eth24gx2x10gxeseries 58 eth24gxeseries 59 eth4x10gxeseries 60 eth48gteseries 61 mpu960 62 eth44gt4gcsmplsdc 63 eth44gt4gc2xxsmplsdc 64 eth44gt4gc4xxmplsdc 65 eth24gx2x10gxhseriesII 66 eth20gt4gc4xs 67 eth24gxhseriesII 68 eth2x10gxhseriesII 69 eth48gxhseriesII 70 eth4x10gxhseriesII 71 eth24gx4xs	.1.3.6.1.4.1.3709.3.5.201.1.1.2.1.10
swFirmwareReleaseDate Release date of the firmware.	OctetString Constraints: range: 0-32	.1.3.6.1.4.1.3709.3.5.201.1.1.2.1.11
swTemperature Temperature of the switch.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3709.3.5.201.1.1.2.1.12
swG704IntfNumber The number of G704 interfaces of this switch.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3709.3.5.201.1.1.2.1.13
swE1cIntfNumber The number of E1c interfaces of this switch.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3709.3.5.201.1.1.2.1.14
swBundleIntfNumber The number of Bundle interfaces of this switch.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3709.3.5.201.1.1.2.1.15
swPtpIntfNumber The number of PTP interfaces of this switch.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3709.3.5.201.1.1.2.1.16
swSdhIntfNumber The number of SDH interfaces of this switch.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3709.3.5.201.1.1.2.1.17
swVC4Number The number of VC4 interfaces of this switch.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3709.3.5.201.1.1.2.1.18
swVC12Number The number of VC12 interfaces of this switch.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3709.3.5.201.1.1.2.1.19

Table about status of individual powers.

switchIndivPowerEntry row .1.3.6.1.4.1.3709.3.5.201.1.1.4.1

Table about status of individual powers.

Indexes

swIndivPowerUnitIndex swIndivPowerIndex

Column	Syntax	OID
swIndivPowerUnitIndex This is defined as swUnitIndex.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3709.3.5.201.1.1.4.1.1
swIndivPowerIndex 1 means internal power. 2 means external power.	Integer32 Constraints: range: 1-2	.1.3.6.1.4.1.3709.3.5.201.1.1.4.1.2
swIndivPowerStatus notPresent(3) means not present. green(2) means up. red(1) means down.	Enumeration Enumerated Values: 1 red 2 green 3 notPresent	.1.3.6.1.4.1.3709.3.5.201.1.1.4.1.3

Table about status of individual fans.

switchIndivFanEntry row .1.3.6.1.4.1.3709.3.5.201.1.1.5.1

Table about status of individual fans.

Indexes

swIndivFanUnitIndex swIndivFanIndex

Column	Syntax	OID
swIndivFanUnitIndex This is defined as swUnitIndex.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3709.3.5.201.1.1.5.1.1
swIndivFanIndex	Integer32 Constraints: range: 1-2	.1.3.6.1.4.1.3709.3.5.201.1.1.5.1.2
swIndivFanStatus red(1) means down. green(2) means up.	Enumeration Enumerated Values: 1 red 2 green	.1.3.6.1.4.1.3709.3.5.201.1.1.5.1.3

Table about status of individual alarms.

switchIndivAlarmEntry row .1.3.6.1.4.1.3709.3.5.201.1.1.6.1

Table about status of individual alarms.

Indexes

swIndivAlarmUnitIndex swIndivAlarmIndex

Column	Syntax	OID
swIndivAlarmUnitIndex This is defined as swUnitIndex.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3709.3.5.201.1.1.6.1.1
swIndivAlarmIndex	Integer32 Constraints: range: 1-3	.1.3.6.1.4.1.3709.3.5.201.1.1.6.1.2
swIndivAlarmStatus	Enumeration Enumerated Values: 1 deactivated 2 activated	.1.3.6.1.4.1.3709.3.5.201.1.1.6.1.3

Table about the total of used MAC addresses entries.

switchMacAddrUsageEntry row .1.3.6.1.4.1.3709.3.5.201.1.1.12.1

Table about the total of used MAC addresses entries.

Indexes

swMacAddrUnitIndex

Column	Syntax	OID
swMacAddrUnitIndex This is defined as swUnitIndex.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3709.3.5.201.1.1.12.1.1
swMacAddrUsageValue The total of used MAC addresses entries.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3709.3.5.201.1.1.12.1.2

Table of descriptive and status information about
MPUs in this system.

switchMpuEntry row .1.3.6.1.4.1.3709.3.5.201.1.1.14.1

An entry in the table, containing information
about a single MPU in this system.

Indexes

swMpuIndex

Column	Syntax	OID
swMpuIndex This object identifies the MPU within the system for which this entry contains information.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3709.3.5.201.1.1.14.1.1
swMpuBootLoaderVer Loader version of the main board.	OctetString Constraints: range: 0-20	.1.3.6.1.4.1.3709.3.5.201.1.1.14.1.2
swMpuRoleInSystem Indicates the MPU is active(1) or standby(2) in this system.	Enumeration Enumerated Values: 1 active 2 standby	.1.3.6.1.4.1.3709.3.5.201.1.1.14.1.3
swMpuSerialNumber Serial number of the MPU.	OctetString Constraints: range: 0-80	.1.3.6.1.4.1.3709.3.5.201.1.1.14.1.4
swMpuModelId MPU model identifier.	Enumeration Enumerated Values: 9 mpu192 10 mpu384	.1.3.6.1.4.1.3709.3.5.201.1.1.14.1.5

Table about status of output alarms.

switchIndivAlarmOutEntry row .1.3.6.1.4.1.3709.3.5.201.1.1.16.1

Table about status of output alarms.

Indexes

swIndivAlarmOutUnitIndex

Column	Syntax	OID
swIndivAlarmOutUnitIndex This is defined as swUnitIndex.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3709.3.5.201.1.1.16.1.1
swIndivAlarmOutStatus Indicates current alarm output status, as configured in external-alarm-output.	Enumeration Enumerated Values: 1 deactivated 2 activated	.1.3.6.1.4.1.3709.3.5.201.1.1.16.1.2

Table about CLI sessions informations.

switchSessionEntry row .1.3.6.1.4.1.3709.3.5.201.1.1.18.1

An entry in the table, containing information
about a single switch in this system.

Indexes

swSessionUnitIndex

Column	Syntax	OID
swSessionUnitIndex This is defined as swUnitIndex.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3709.3.5.201.1.1.18.1.1
swSessionName Session username.	OctetString Constraints: range: 0-20	.1.3.6.1.4.1.3709.3.5.201.1.1.18.1.2
swSessionUptime Login time and date (uptime).	OctetString Constraints: range: 0-20	.1.3.6.1.4.1.3709.3.5.201.1.1.18.1.3
swSessionPid CLI Session Process ID.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3709.3.5.201.1.1.18.1.4
swSessionSrcIP IP from process that called CLI - telnet, ssh or inetd.	OctetString Constraints: range: 0-20	.1.3.6.1.4.1.3709.3.5.201.1.1.18.1.5

Table of descriptive and status information about
configuration of each switch port (including expansion slot)
in this system. This table also contains information
about each trunk (similar to Cisco's EtherChannel).

portEntry row .1.3.6.1.4.1.3709.3.5.201.1.2.1.1

An entry in the table, containing information
about configuration in one switch port of the switch.

Indexes

portIndex

Column	Syntax	OID
portIndex This is defined as ifIndex in the IF-MIB.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3709.3.5.201.1.2.1.1.1
portName Indicates the port name. This is same as ifAlias in the IF-MIB (RFC2863 or later).	OctetStringr/w Constraints: range: 0-64	.1.3.6.1.4.1.3709.3.5.201.1.2.1.1.2
portType Indicates the port type.	Enumeration Enumerated Values: 1 other 2 hundredBaseTX 3 hundredBaseFX 4 thousandBaseSX 5 thousandBaseLX 6 thousandBaseT 7 thousandBaseGBIC 8 thousandBaseSfp 9 hundredBaseFxScSingleMode 10 hundredBaseFxScMultiMode 11 tenG 12 tenGSfp	.1.3.6.1.4.1.3709.3.5.201.1.2.1.1.3
portSpeedDpxCfg Set the port speed and duplex mode as follows: halfDuplex10(2) - 10Mbps and half duplex mode fullDuplex10(3) - 10Mbps and full duplex mode halfDuplex100(4) - 100Mbps and half duplex mode fullDuplex100(5) - 100…	Enumerationr/w Enumerated Values: 1 reserved 2 halfDuplex10 3 fullDuplex10 4 halfDuplex100 5 fullDuplex100 6 halfDuplex1000 7 fullDuplex1000 8 fullDuplex10000	.1.3.6.1.4.1.3709.3.5.201.1.2.1.1.4
portFlowCtrlCfg (1) Flow control mechanism is enabled. If the port type is hundredBaseTX or thousandBaseSX: When the port is operating in halfDuplex mode, the port uses backPressure flow control mechanism. When the port is operating in…	Enumerationr/w Enumerated Values: 1 enabled 2 disabled 3 backPressure 4 dot3xFlowControlRxTx 5 dot3xFlowControlRx 6 dot3xFlowControlTx	.1.3.6.1.4.1.3709.3.5.201.1.2.1.1.5
portCapabilities Port capabilities.	Bitsr/w Enumerated Values: 0 portCap10half 1 portCap10full 2 portCap100half 3 portCap100full 4 portCap1000half 5 portCap1000full 6 portCap10000full 7 dot3xFlowControlRxTx 8 dot3xFlowControlRx 9 dot3xFlowControlTx	.1.3.6.1.4.1.3709.3.5.201.1.2.1.1.6
portAutonegotiation Whether autonegotiation is enabled.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.3709.3.5.201.1.2.1.1.7
portSpeedDpxStatus The operating speed and duplex mode of the switched port. If this index is a trunk, the speed is the speed of its individual members. If this index is a trunk and the result is inconsistent among its member ports, this …	Enumeration Enumerated Values: 1 error 2 halfDuplex10 3 fullDuplex10 4 halfDuplex100 5 fullDuplex100 6 halfDuplex1000 7 fullDuplex1000 8 fullDuplex10000 9 down	.1.3.6.1.4.1.3709.3.5.201.1.2.1.1.8
portFlowCtrlStatus (2) BackPressure flow control machanism is used. (3) IEEE 802.3 flow control machanism is used. (4) Flow control mechanism is disabled. If this index is a trunk and the result is inconsistent among its member ports, thi…	Enumeration Enumerated Values: 1 error 2 backPressure 3 dot3xFlowControlRxTx 4 dot3xFlowControlRx 5 dot3xFlowControlTx 6 disable	.1.3.6.1.4.1.3709.3.5.201.1.2.1.1.9
portMdiStatus	Enumeration Enumerated Values: 1 auto 2 normal 3 xover	.1.3.6.1.4.1.3709.3.5.201.1.2.1.1.10
portTrunkIndex The trunk to which this port belongs. A value of 0 means that this port does not belong to any trunk. A value greater than zero means that this port belongs to trunk at trunkIndex, defined by the corresponding trunkPort…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3709.3.5.201.1.2.1.1.11

Table of descriptive and status information about
configuration of each trunk,
similar to Cisco EtherChannel.

trunkEntry row .1.3.6.1.4.1.3709.3.5.201.1.3.3.1

An entry in the table, containing information
about configuration in one trunk of the switch.

Indexes

trunkIndex

Column	Syntax	OID
trunkIndex This object identifies the trunk within the switch for which this entry contains information.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3709.3.5.201.1.3.3.1.1
trunkPorts The complete set of ports currently associated with this trunk.	Q-BRIDGE-MIBPortListr/w	.1.3.6.1.4.1.3709.3.5.201.1.3.3.1.2
trunkCreation A value of static(1) means a statically configured trunk. A value of lacp(2) means an LACP-configured trunk.	Enumeration Enumerated Values: 1 static 2 lacp	.1.3.6.1.4.1.3709.3.5.201.1.3.3.1.3
trunkStatus Writing this to valid(1) creates an entry. Writing this to invalid(2) destroys an entry.	Enumerationr/w Enumerated Values: 1 valid 2 invalid	.1.3.6.1.4.1.3709.3.5.201.1.3.3.1.4

Table for LACP port configuration.

lacpPortEntry row .1.3.6.1.4.1.3709.3.5.201.1.4.1.1

Entry for LACP port configuration.

Indexes

lacpPortIndex

Column	Syntax	OID
lacpPortIndex This is defined as ifIndex in the IF-MIB.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3709.3.5.201.1.4.1.1.1
lacpPortStatus Whether 802.3ad LACP is enabled.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.3709.3.5.201.1.4.1.1.2

The table manages port settings for Spanning Tree
Protocol 802.1d, 802.1w or 802.1s depending on the
value specified by staProtocolType.

staPortEntry row .1.3.6.1.4.1.3709.3.5.201.1.5.2.1

The conceptual entry of staPortTable.

Indexes

staPortIndex

Column	Syntax	OID
staPortIndex The port and the trunk (excluding trunk member ports) interface of the staPortTable. The interface identified by a particular value of this index is the same interface as identified by the same value of dot1dStpPort in …	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3709.3.5.201.1.5.2.1.1
staPortAdminEdgePort The administrative value of the edge port parameter. A value of true(1) indicates that this port should be assumed as an edge-port and a value of false(2) indicates that this port should be assumed as a non-edge-port.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.3709.3.5.201.1.5.2.1.2
staPortOperEdgePort The operational value of the edge port parameter. The object is initialized to the value of staPortAdminEdgePort and is set false when a BPDU is received.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.3709.3.5.201.1.5.2.1.3
staPortAdminPointToPoint The administrative point-to-point status of the LAN segment attached to this port. A value of forceTrue(0) indicates that this port should always be treated as if it is connected to a point-to-point link. A value of for…	Enumerationr/w Enumerated Values: 0 forceTrue 1 forceFalse 2 auto	.1.3.6.1.4.1.3709.3.5.201.1.5.2.1.4
staPortOperPointToPoint The operational point-to-point status of the LAN segment attached to this port. This indicates whether a port is considered to have a point-to-point connection or not. The value is determined by management or by auto-de…	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.3709.3.5.201.1.5.2.1.5
staPortLongPathCost The contribution of this port to the path cost (in 32 bits value) of paths towards the spanning tree root which include this port. This object is used to configure the spanning tree port path cost in the …	Integer32r/w Constraints: range: 1-200000000	.1.3.6.1.4.1.3709.3.5.201.1.5.2.1.6
staPortSystemStatus Per-port spanning tree status. (1) Spanning tree protocol is enabled. (2) Spanning tree protocol is disabled.	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.3709.3.5.201.1.5.2.1.7

Table of descriptive and status information about
switches in this system.

mirrorEntry row .1.3.6.1.4.1.3709.3.5.201.1.8.2.1

An entry in the table, containing information
about a single switch in this system.

Indexes

mirrorSourcePort

Column	Syntax	OID
mirrorSourcePort Source port for mirrored packets. This is defined as ifIndex in the IF-MIB.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3709.3.5.201.1.8.2.1.1
mirrorType If this value is rx(1), receive packets will be mirrored. If this value is tx(2), transmit packets will be mirrored. If this value is all(3), all packts will be mirrored	Enumerationr/w Enumerated Values: 1 rx 2 tx 3 all 4 disable	.1.3.6.1.4.1.3709.3.5.201.1.8.2.1.2

Table for current router ports.

igmpSnoopRouterCurrentEntry row .1.3.6.1.4.1.3709.3.5.201.1.9.8.1

Entry for current router ports.

Indexes

igmpSnoopRouterCurrentVlanIndex

Column	Syntax	OID
igmpSnoopRouterCurrentVlanIndex This is defined as dot1qVlanIndex in the Q-BRIDGE-MIB.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3709.3.5.201.1.9.8.1.1
igmpSnoopRouterCurrentPorts The set of ports which are current router ports. Within this list, some router ports are static router ports. Please refer to igmpSnoopRouterStaticTable.	Q-BRIDGE-MIBPortList	.1.3.6.1.4.1.3709.3.5.201.1.9.8.1.2

Table for static router ports.

igmpSnoopRouterStaticEntry row .1.3.6.1.4.1.3709.3.5.201.1.9.9.1

Entry for static router ports.

Indexes

igmpSnoopRouterStaticVlanIndex

Column	Syntax	OID
igmpSnoopRouterStaticVlanIndex This is defined as dot1qVlanIndex in the Q-BRIDGE-MIB.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3709.3.5.201.1.9.9.1.1
igmpSnoopRouterStaticPorts The set of ports which are static router ports.	Q-BRIDGE-MIBPortListr/w	.1.3.6.1.4.1.3709.3.5.201.1.9.9.1.2

Table for current multicast addresses.

igmpSnoopMulticastCurrentEntry row .1.3.6.1.4.1.3709.3.5.201.1.9.10.1

Entry for current multicast addresses.

Indexes

igmpSnoopMulticastCurrentVlanIndex igmpSnoopMulticastCurrentIpAddress

Column	Syntax	OID
igmpSnoopMulticastCurrentVlanIndex This is defined as dot1qVlanIndex in the Q-BRIDGE-MIB.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3709.3.5.201.1.9.10.1.1
igmpSnoopMulticastCurrentIpAddress IP address of multicast group.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.3709.3.5.201.1.9.10.1.2
igmpSnoopMulticastCurrentPorts The set of ports which are members.	Q-BRIDGE-MIBPortList	.1.3.6.1.4.1.3709.3.5.201.1.9.10.1.3

Table for static multicast addresses.

igmpSnoopMulticastStaticEntry row .1.3.6.1.4.1.3709.3.5.201.1.9.11.1

Entry for static multicast addresses.

Indexes

igmpSnoopMulticastStaticVlanIndex igmpSnoopMulticastStaticIpAddress

Column	Syntax	OID
igmpSnoopMulticastStaticVlanIndex This is defined as dot1qVlanIndex in the Q-BRIDGE-MIB.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3709.3.5.201.1.9.11.1.1
igmpSnoopMulticastStaticIpAddress IP address of multicast group.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.3709.3.5.201.1.9.11.1.2
igmpSnoopMulticastStaticPorts The set of ports which are static members.	Q-BRIDGE-MIBPortListr/w	.1.3.6.1.4.1.3709.3.5.201.1.9.11.1.3

Table of descriptive and status information about
configuration of each switch ports(including expansion slot)
       in this system.

bcastStormEntry row .1.3.6.1.4.1.3709.3.5.201.1.11.1.1

An entry in the table, containing information
about configuration in one switch port of the switch.

Indexes

bcastStormIfIndex

Column	Syntax	OID
bcastStormIfIndex This is defined as ifIndex in the IF-MIB.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3709.3.5.201.1.11.1.1.1
bcastStormStatus Whether broadcast storm protection is enabled.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.3709.3.5.201.1.11.1.1.2
bcastStormPacketRate Broadcast storm threshold as packets per second.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3709.3.5.201.1.11.1.1.3

Table for VLAN configuration.

vlanEntry row .1.3.6.1.4.1.3709.3.5.201.1.12.1.1

Entry for VLAN configuration.

Indexes

vlanIndex

Column	Syntax	OID
vlanIndex Same is dot1qVlanIndex in the Q-BRIDGE-MIB. This table has only one entry - the entry for the VLAN of the management interface.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3709.3.5.201.1.12.1.1.1
vlanAddressMethod Method to get the IP address.	Enumerationr/w Enumerated Values: 1 user 2 dhcp	.1.3.6.1.4.1.3709.3.5.201.1.12.1.1.2

Table for weighted round robin (WRR).

prioWrrEntry row .1.3.6.1.4.1.3709.3.5.201.1.13.1.1

Entry for weighted round robin (WRR).

Indexes

prioWrrTrafficClass

Column	Syntax	OID
prioWrrTrafficClass Traffic class for this entry, as defined in dot1dTrafficClass in the Q-BRIDGE-MIB. The actual maximum depends on the hardware, and is equal to dot1dPortNumTrafficClasses-1.	Integer32 Constraints: range: 0-7	.1.3.6.1.4.1.3709.3.5.201.1.13.1.1.1
prioWrrWeight Weight for this entry.	Integer32r/w Constraints: range: 1-31	.1.3.6.1.4.1.3709.3.5.201.1.13.1.1.2

A list of trap destination entries.

trapDestEntry row .1.3.6.1.4.1.3709.3.5.201.1.14.1.1

This entry includes a destination IP address to which to send
traps for this community.

Indexes

trapDestAddress

Column	Syntax	OID
trapDestAddress The address to send traps.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.3709.3.5.201.1.14.1.1.1
trapDestCommunity A community to which this destination address belongs.	OctetStringr/w Constraints: range: 0-31	.1.3.6.1.4.1.3709.3.5.201.1.14.1.1.2
trapDestStatus Writing this to valid(1) creates an entry. Writing this to invalid(2) destroys an entry.	Enumerationr/w Enumerated Values: 1 valid 2 invalid	.1.3.6.1.4.1.3709.3.5.201.1.14.1.1.3
trapDestVersion This variables represent the version of the Trap we wish to send to trap Receiver, if the value is 1, mean we wish to send Version 1 trap, if the value is 2, mean we wish to send version 2 trap.	Enumerationr/w Enumerated Values: 1 version1 2 version2	.1.3.6.1.4.1.3709.3.5.201.1.14.1.1.4

Table for rate limit of each port.

rateLimitPortEntry row .1.3.6.1.4.1.3709.3.5.201.1.16.1.1

Entry for rate limit of each port.

Indexes

rlPortIndex

Column	Syntax	OID
rlPortIndex The port and the trunk (including trunk member) interface of the portTable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3709.3.5.201.1.16.1.1.1
rlPortInputStatus Whether input rate limit is enabled for this port.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.3709.3.5.201.1.16.1.1.2
rlPortOutputStatus Whether output rate limit is enabled for this port.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.3709.3.5.201.1.16.1.1.3
rlPortInputRate Rate-limit in kilobits per second. Must be multiple of 64.	Integer32r/w Constraints: range: 64-1000000	.1.3.6.1.4.1.3709.3.5.201.1.16.1.1.4
rlPortInputBurst Maximum burst size in kilobits. Must be power of 2.	Integer32r/w Constraints: range: 32-4096	.1.3.6.1.4.1.3709.3.5.201.1.16.1.1.5
rlPortOutputRate Rate-limit in kilobits per second. Must be multiple of 64.	Integer32r/w Constraints: range: 64-1000000	.1.3.6.1.4.1.3709.3.5.201.1.16.1.1.6
rlPortOutputBurst Maximum burst size in kilobits. Must be power of 2.	Integer32r/w Constraints: range: 32-4096	.1.3.6.1.4.1.3709.3.5.201.1.16.1.1.7

The table for multiple RADIUS server.

radiusMultipleServerEntry row .1.3.6.1.4.1.3709.3.5.201.1.17.1.7.1

The conceptual row for radiusMultipleServerTable.

Indexes

radiusMultipleServerIndex

Column	Syntax	OID
radiusMultipleServerIndex The RADIUS multiple server index.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3709.3.5.201.1.17.1.7.1.1
radiusMultipleServerAddress IP address of a multiple RADIUS server. IP address will be set to system default value(e.g. 10.1.0.1) after creates an entry first by setting radiusMultipleServerStatus to valid.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.3709.3.5.201.1.17.1.7.1.2
radiusMultipleServerPortNumber IP port number of a multiple RADIUS server.	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.3709.3.5.201.1.17.1.7.1.3
radiusMultipleServerKey Key for RADIUS. This variable can only be written. When this variable is read, it always returns a zero-length string. when this variable is written, it's max length is 48 characters.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.3709.3.5.201.1.17.1.7.1.4
radiusMultipleServerRetransmit Maximum number of retransmissions for RADIUS.	Integer32r/w Constraints: range: 1-30	.1.3.6.1.4.1.3709.3.5.201.1.17.1.7.1.5
radiusMultipleServerTimeout Timeout for RADIUS.	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.3709.3.5.201.1.17.1.7.1.6
radiusMultipleServerStatus Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry.	ValidStatusr/w Type Values: 1 valid 2 invalid	.1.3.6.1.4.1.3709.3.5.201.1.17.1.7.1.8

A list of IP address entries.

ipFilterSnmpEntry row .1.3.6.1.4.1.3709.3.5.201.1.17.3.1.1

This entry includes an IP address range which the system
will allow to connect to this device through SNMP.

Indexes

ipFilterSnmpAddress ipFilterSnmpMask

Column	Syntax	OID
ipFilterSnmpAddress The start IP address.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.3709.3.5.201.1.17.3.1.1.1
ipFilterSnmpMask The IP mask.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.3709.3.5.201.1.17.3.1.1.2
ipFilterSnmpStatus Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry.	ValidStatusr/w Type Values: 1 valid 2 invalid	.1.3.6.1.4.1.3709.3.5.201.1.17.3.1.1.3

A list of IP address entries.

ipFilterHTTPEntry row .1.3.6.1.4.1.3709.3.5.201.1.17.3.2.1

This entry includes an IP address range which the system
will allow to connect to this device through SNMP.

Indexes

ipFilterHTTPAddress ipFilterHTTPMask

Column	Syntax	OID
ipFilterHTTPAddress The start IP address.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.3709.3.5.201.1.17.3.2.1.1
ipFilterHTTPMask The IP mask.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.3709.3.5.201.1.17.3.2.1.2
ipFilterHTTPStatus Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry.	ValidStatusr/w Type Values: 1 valid 2 invalid	.1.3.6.1.4.1.3709.3.5.201.1.17.3.2.1.3

A list of IP address entries.

ipFilterTelnetEntry row .1.3.6.1.4.1.3709.3.5.201.1.17.3.3.1

This entry includes an IP address range which the system
will allow them to connect to this device through SNMP.

Indexes

ipFilterTelnetAddress ipFilterTelnetMask

Column	Syntax	OID
ipFilterTelnetAddress The start IP address.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.3709.3.5.201.1.17.3.3.1.1
ipFilterTelnetMask The IP mask.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.3709.3.5.201.1.17.3.3.1.2
ipFilterTelnetStatus Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry.	ValidStatusr/w Type Values: 1 valid 2 invalid	.1.3.6.1.4.1.3709.3.5.201.1.17.3.3.1.3

A list of IP address entries.

ipFilterSSHEntry row .1.3.6.1.4.1.3709.3.5.201.1.17.3.4.1

This entry includes an IP address range which the system
will allow them to connect to this device through SNMP.

Indexes

ipFilterSSHAddress ipFilterSSHMask

Column	Syntax	OID
ipFilterSSHAddress The start IP address.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.3709.3.5.201.1.17.3.4.1.1
ipFilterSSHMask The IP mask.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.3709.3.5.201.1.17.3.4.1.2
ipFilterSSHStatus Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry.	ValidStatusr/w Type Values: 1 valid 2 invalid	.1.3.6.1.4.1.3709.3.5.201.1.17.3.4.1.3

A Table for storing the remote log Server list.

remoteLogServerEntry row .1.3.6.1.4.1.3709.3.5.201.1.19.6.4.1

A conceptually row for remoteLogServerTable.

Indexes

remoteLogServerIp

Column	Syntax	OID
remoteLogServerIp The IP address of the remote log Server.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.3709.3.5.201.1.19.6.4.1.1
remoteLogServerStatus Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry.	ValidStatusr/w Type Values: 1 valid 2 invalid	.1.3.6.1.4.1.3709.3.5.201.1.19.6.4.1.2

Table for SNTP servers

sntpServerEntry row .1.3.6.1.4.1.3709.3.5.201.1.20.1.3.1

Entry for SNTP servers.

Indexes

sntpServerIp

Column	Syntax	OID
sntpServerIp The IP address of a server.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.3709.3.5.201.1.20.1.3.1.1
sntpServerStatus Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry.	ValidStatusr/w Type Values: 1 valid 2 invalid	.1.3.6.1.4.1.3709.3.5.201.1.20.1.3.1.2

This table contain the information of the file system;
we can also perform the delete, set startup file operation.

fileInfoEntry row .1.3.6.1.4.1.3709.3.5.201.1.21.1.1

A conceptually row for fileInfoTable.

Indexes

fileInfoUnitID fileInfoFileIndex

Column	Syntax	OID
fileInfoUnitID The switch unit in a stacking system, in a non-stacking system, this value is always 1.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3709.3.5.201.1.21.1.1.1
fileInfoFileIndex	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3709.3.5.201.1.21.1.1.2
fileInfoFlashId	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3709.3.5.201.1.21.1.1.3
fileInfoFileName The file Name of the file System in the device.	OctetString Constraints: range: 1-32	.1.3.6.1.4.1.3709.3.5.201.1.21.1.1.4
fileInfoFileType The file type of the file System in the device.	Enumeration Enumerated Values: 1 firmware 2 config	.1.3.6.1.4.1.3709.3.5.201.1.21.1.1.5
fileInfoIsStartUp This flag indicate whether this file is a startup file. Set this object to true(1) to indicate that this is a startup file. Setting this object to false(2) is a invalid operation.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.3709.3.5.201.1.21.1.1.6
fileInfoFileSize The sizes (in bytes) of the file.	bytesSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3709.3.5.201.1.21.1.1.7
fileInfoCreationTime The creation time of the file, This is a text string in the following form, based on Unix: 'Mmm _d hh:mm:ss yyyy'. 'Mmm' are the first three letters of the English name of the month. '_d' is the day of month. A single-d…	OctetString Constraints: range: 20-20	.1.3.6.1.4.1.3709.3.5.201.1.21.1.1.8
fileInfoDelete Write this object to delete(2) to delete a file, when read, this always return noDelete(1).	Enumerationr/w Enumerated Values: 1 noDelete 2 delete	.1.3.6.1.4.1.3709.3.5.201.1.21.1.1.9

Table of dropped packets counters by interface for QoS statistics.

countHoldPktsEntry row .1.3.6.1.4.1.3709.3.5.201.1.22.1.1

An entry in the table, containing the number of dropped packets in a single interface.

Indexes

interfaceNumber

Column	Syntax	OID
interfaceNumber Interface Number from dropped packets.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3709.3.5.201.1.22.1.1.1
countHoldPkts Counter Hold shows the number of dropped packets in a single interface.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.3709.3.5.201.1.22.1.1.2

This table contain the description about counters,
so they can be used to measure performance from user-based
filters.

filterCounterInfoEntry row .1.3.6.1.4.1.3709.3.5.201.1.23.1.1

A conceptually row for filterCounterInfoTable.

Indexes

filterCounterInfoIndex

Column	Syntax	OID
filterCounterInfoIndex Index for counter, matches current CLI information	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3709.3.5.201.1.23.1.1.1
filterCounterInfoRemark Remark is a textual description, as configured by user.	OctetString Constraints: range: 0-32	.1.3.6.1.4.1.3709.3.5.201.1.23.1.1.2

This table contains current values for filter counters.

filterCounterValueEntry row .1.3.6.1.4.1.3709.3.5.201.1.23.2.1

A conceptually row for filterCounterValueTable.

Indexes

filterCounterInfoIndex filterCounterValueIndex

Column	Syntax	OID
filterCounterValueIndex Subcounters index identifies each internal counter that a user-editable counter can have. Internal counters may differ from equipament model to other.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3709.3.5.201.1.23.2.1.1
filterCounterValue The total number of data which matches internal subcounter. It can be bytes or packets, according to equipment configuration. Discontinuities in the value of this counter can occur at re-initialization of…	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.3709.3.5.201.1.23.2.1.2

This table contains EAPS information about all EAPS
domains on this device.

eapsInfoEntry row .1.3.6.1.4.1.3709.3.5.201.1.24.1.1

An individual entry of this table contains EAPS
information related to that EAPS domain.

Indexes

eapsInfoId

Column	Syntax	OID
eapsInfoId This indicates the mode of the EAPS Id.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3709.3.5.201.1.24.1.1.1
eapsInfoName The EAPS domain name.	OctetString Constraints: range: 0-32	.1.3.6.1.4.1.3709.3.5.201.1.24.1.1.2
eapsInfoMode This indicates the mode of the EAPS domain.	Enumeration Enumerated Values: 0 invalid 1 master 2 transit	.1.3.6.1.4.1.3709.3.5.201.1.24.1.1.3
eapsInfoState This indicates the current EAPS state of this EAPS domain.	Enumeration Enumerated Values: 0 idle 1 complete 2 failed 3 linksup 4 linkdown 5 preforwarding 6 init	.1.3.6.1.4.1.3709.3.5.201.1.24.1.1.4

This table contains CFM delay measurements informationS.

cfmProbeDmEntry row .1.3.6.1.4.1.3709.3.5.201.1.25.1.1

An individual entry of this table contains CFM
delay measurements information related to that probe.

Indexes

cfmProbeDmIndex

Column	Syntax	OID
cfmProbeDmIndex The index value used to identify the probe.	Integer32 Constraints: range: 1-32	.1.3.6.1.4.1.3709.3.5.201.1.25.1.1.1
cfmProbeDmAvgDelay The average delay in microseconds of CFM delay measurement.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3709.3.5.201.1.25.1.1.2
cfmProbeDmAvgJitter The average jitter in microseconds of CFM delay measurement.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3709.3.5.201.1.25.1.1.3
cfmProbeDmLoss The percentage of CFM frames lost on the indicate probe.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3709.3.5.201.1.25.1.1.4

Table of cpu usage.

cpuActiveUsageEntry row .1.3.6.1.4.1.3709.3.5.201.1.26.1.1

Table of cpu usage.

Indexes

cpuActiveUsageIndex

Column	Syntax	OID
cpuActiveUsageIndex This object identifies the switch within the system for which this entry contains information. This value can never be greater than switchNumber.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3709.3.5.201.1.26.1.1.1
cpuActiveUsageValue The CPU usage (in hundredths of a percent).	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3709.3.5.201.1.26.1.1.2

Table of memory usage.

memActiveUsageEntry row .1.3.6.1.4.1.3709.3.5.201.1.26.2.1

Table of memory usage.

Indexes

memActiveUsageIndex

Column	Syntax	OID
memActiveUsageIndex This object identifies the switch within the system for which this entry contains information. This value can never be greater than switchNumber.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3709.3.5.201.1.26.2.1.1
memActiveUsageValue The memory usage (percentage).	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3709.3.5.201.1.26.2.1.2

Table of cpu usage.

cpuStandbyUsageEntry row .1.3.6.1.4.1.3709.3.5.201.1.26.3.1

Table of cpu usage.

Indexes

cpuStandbyUsageIndex

Column	Syntax	OID
cpuStandbyUsageIndex This object identifies the switch within the system for which this entry contains information. This value can never be greater than switchNumber.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3709.3.5.201.1.26.3.1.1
cpuStandbyUsageValue The CPU usage (in hundredths of a percent).	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3709.3.5.201.1.26.3.1.2

Table of memory usage.

memStandbyUsageEntry row .1.3.6.1.4.1.3709.3.5.201.1.26.4.1

Table of memory usage.

Indexes

memStandbyUsageIndex

Column	Syntax	OID
memStandbyUsageIndex This object identifies the switch within the system for which this entry contains information. This value can never be greater than switchNumber.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3709.3.5.201.1.26.4.1.1
memStandbyUsageValue The memory usage (percentage).	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3709.3.5.201.1.26.4.1.2

Table for statistics of interface queues.

queuePortEntry row .1.3.6.1.4.1.3709.3.5.201.1.27.1.1

An entry in the table, containing information
about configuration in one switch port of the switch.

Indexes

queuePortIfIndex queuePortQueueIndex

Column	Syntax	OID
queuePortIfIndex This is defined as ifIndex in the IF-MIB.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3709.3.5.201.1.27.1.1.1
queuePortQueueIndex The COS queue from the interface.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3709.3.5.201.1.27.1.1.2
queuePortSentPackets Counter of sent packets.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.3709.3.5.201.1.27.1.1.3
queuePortSentBytes Counter of sent bytes.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.3709.3.5.201.1.27.1.1.4
queuePortDroppedPackets Counter of dropped packets.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.3709.3.5.201.1.27.1.1.5
queuePortDroppedBytes Counter of dropped bytes.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.3709.3.5.201.1.27.1.1.6

Transceivers digital diagnostic table.

ddTransceiversEntry row .1.3.6.1.4.1.3709.3.5.201.1.28.1.1

An entry in the table, containing information
about digital diagnostic.

Indexes

ddTransceiversIfIndex

Column	Syntax	OID
ddTransceiversIfIndex This is defined as ifIndex in the IF-MIB.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3709.3.5.201.1.28.1.1.1
ddTransceiversTemperature Transceiver temperature information in Celsius	OctetString Constraints: range: 0-20	.1.3.6.1.4.1.3709.3.5.201.1.28.1.1.2
ddTransceiversVcc3v3 Transceiver Vcc 3v3 information in Volts	OctetString Constraints: range: 0-20	.1.3.6.1.4.1.3709.3.5.201.1.28.1.1.3
ddTransceiversRxPower Transceiver rx power information in Decibels	OctetString Constraints: range: 0-20	.1.3.6.1.4.1.3709.3.5.201.1.28.1.1.4
ddTransceiversTxPower Transceiver tx power information in Decibels	OctetString Constraints: range: 0-20	.1.3.6.1.4.1.3709.3.5.201.1.28.1.1.5
ddTransceiversTxBias Transceiver tx bias information in Amperes	OctetString Constraints: range: 0-20	.1.3.6.1.4.1.3709.3.5.201.1.28.1.1.6
ddTransceiversTemperatureValue Transceiver temperature infomation	Celsius (degrees C)SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3709.3.5.201.1.28.1.1.7
ddTransceiversVcc3v3Value Transceiver Vcc 3v3 infomation	0.1 VSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3709.3.5.201.1.28.1.1.8
ddTransceiversRxPowerValue Transceiver rx power infomation	0.1 dBmSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3709.3.5.201.1.28.1.1.9
ddTransceiversTxPowerValue Transceiver tx power infomation	0.1 dBmSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3709.3.5.201.1.28.1.1.10
ddTransceiversTxBiasValue Transceiver tx bias infomation	0.1 mASNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3709.3.5.201.1.28.1.1.11