DMON-PHY-MIB
This is the MIB module for DMON PHY measurement.
History
MG - 09/09/2011
-Updated UNITS from centidBmV to TenthdBmV
-Updated MER OIDS UNITS from TenthdBmV to TenthdB
MG - 09/23/2011
-Change units from billionth to trillionth
MG - 11/04/2011
-Added
-dmonPhyInfoManagement
-dmonPhyInfoMgtHistoryRetention
-Change UNITS from TenthdBmv to dBmv
-Change UNITS from TenthdB to dB
- Source file
DMON-PHY-MIB- Last revised
- Identity
dmonPhyGroup- Base OID
1.3.6.1.4.1.5802.999999.1
Imported Objects
| DMON-MIB | dmonMib ModulationType |
| DOCS-IF-MIB | DocsEqualizerData TenthdB TenthdBmV |
| SNMPv2-CONF | MODULE-COMPLIANCE (no object page) OBJECT-GROUP (no object page) |
| SNMPv2-SMI | Counter32 enterprises Integer32 IpAddress MODULE-IDENTITY (no object page) OBJECT-TYPE (no object page) Unsigned32 |
| SNMPv2-TC | DateAndTime RowStatus StorageType TimeInterval TruthValue |
Net-SNMP examples using the electroline MIB directory Show commands
These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.
Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'DMON-PHY-MIB' -M '/opt/observium/mibs/electroline:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'DMON-PHY-MIB::dmonPhyGroup'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DMON-PHY-MIB' -M '/opt/observium/mibs/electroline:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DMON-PHY-MIB::dmonPhyGroup'
Objects (56)
Showing 56 of 56 objects
Object legend
Object type
Icons distinguish tables, entry rows, columns, scalars, and structural nodes.
SNMPv2-TCTruthValue
Syntax
Blue badges identify the value syntax. Connected badges read as defining module and convention.
IF-MIBifIndex
Table index
Green identifies an index object; yellow names its module when the index is defined elsewhere.
r/w
deprecated
obsolete
Access and status
r/w means read-write. Grey labels mark definitions retained for compatibility.
OBS ✓
Observium use
The indicator appears only when Observium directly references that object.
ifOperStatus
.1.3.6.1.2.1…
Names and OIDs
Object names link to their detail pages. Hover or focus a linked name or badge for available definition details.
.1.3.6.1.4.1.5802.999999.1 |
||
.1.3.6.1.4.1.5802.999999.1.1 |
||
|
secondsUnsigned32
|
.1.3.6.1.4.1.5802.999999.1.1.1 |
|
.1.3.6.1.4.1.5802.999999.1.2 |
||
.1.3.6.1.4.1.5802.999999.1.2.1 |
||
|
Integer32
|
.1.3.6.1.4.1.5802.999999.1.2.1.1 |
|
.1.3.6.1.4.1.5802.999999.1.2.1.10 |
||
|
trillionthSNMPv2-SMIInteger32
|
.1.3.6.1.4.1.5802.999999.1.2.1.11 |
|
|
trillionthSNMPv2-SMIInteger32
|
.1.3.6.1.4.1.5802.999999.1.2.1.12 |
|
|
trillionthSNMPv2-SMIInteger32
|
.1.3.6.1.4.1.5802.999999.1.2.1.13 |
|
|
trillionthSNMPv2-SMIInteger32
|
.1.3.6.1.4.1.5802.999999.1.2.1.14 |
|
|
Enumeration
|
.1.3.6.1.4.1.5802.999999.1.2.1.15 |
|
.1.3.6.1.4.1.5802.999999.1.2.1.16 |
||
.1.3.6.1.4.1.5802.999999.1.2.1.17 |
||
.1.3.6.1.4.1.5802.999999.1.2.1.18 |
||
.1.3.6.1.4.1.5802.999999.1.2.1.19 |
||
.1.3.6.1.4.1.5802.999999.1.2.1.2 |
||
.1.3.6.1.4.1.5802.999999.1.2.1.20 |
||
.1.3.6.1.4.1.5802.999999.1.2.1.21 |
||
|
Enumeration
|
.1.3.6.1.4.1.5802.999999.1.2.1.22 |
|
.1.3.6.1.4.1.5802.999999.1.2.1.23 |
||
.1.3.6.1.4.1.5802.999999.1.2.1.24 |
||
|
hertzInteger32
|
.1.3.6.1.4.1.5802.999999.1.2.1.3 |
|
.1.3.6.1.4.1.5802.999999.1.2.1.4 |
||
.1.3.6.1.4.1.5802.999999.1.2.1.5 |
||
|
Enumeration
|
.1.3.6.1.4.1.5802.999999.1.2.1.6 |
|
|
codewordsSNMPv2-SMICounter32
|
.1.3.6.1.4.1.5802.999999.1.2.1.7 |
|
|
codewordsSNMPv2-SMICounter32
|
.1.3.6.1.4.1.5802.999999.1.2.1.8 |
|
|
codewordsSNMPv2-SMICounter32
|
.1.3.6.1.4.1.5802.999999.1.2.1.9 |
|
.1.3.6.1.4.1.5802.999999.1.3 |
||
.1.3.6.1.4.1.5802.999999.1.3.1 |
||
|
Integer32
|
.1.3.6.1.4.1.5802.999999.1.3.1.1 |
|
|
codewordsSNMPv2-SMICounter32
|
.1.3.6.1.4.1.5802.999999.1.3.1.10 |
|
.1.3.6.1.4.1.5802.999999.1.3.1.11 |
||
|
trillionthSNMPv2-SMIInteger32
|
.1.3.6.1.4.1.5802.999999.1.3.1.12 |
|
|
trillionthSNMPv2-SMIInteger32
|
.1.3.6.1.4.1.5802.999999.1.3.1.13 |
|
|
trillionthSNMPv2-SMIInteger32
|
.1.3.6.1.4.1.5802.999999.1.3.1.14 |
|
|
trillionthSNMPv2-SMIInteger32
|
.1.3.6.1.4.1.5802.999999.1.3.1.15 |
|
|
Enumeration
|
.1.3.6.1.4.1.5802.999999.1.3.1.16 |
|
.1.3.6.1.4.1.5802.999999.1.3.1.17 |
||
.1.3.6.1.4.1.5802.999999.1.3.1.18 |
||
.1.3.6.1.4.1.5802.999999.1.3.1.19 |
||
|
Integer32
|
.1.3.6.1.4.1.5802.999999.1.3.1.2 |
|
.1.3.6.1.4.1.5802.999999.1.3.1.20 |
||
.1.3.6.1.4.1.5802.999999.1.3.1.21 |
||
.1.3.6.1.4.1.5802.999999.1.3.1.22 |
||
|
Enumeration
|
.1.3.6.1.4.1.5802.999999.1.3.1.23 |
|
.1.3.6.1.4.1.5802.999999.1.3.1.24 |
||
.1.3.6.1.4.1.5802.999999.1.3.1.25 |
||
.1.3.6.1.4.1.5802.999999.1.3.1.3 |
||
|
hertzInteger32
|
.1.3.6.1.4.1.5802.999999.1.3.1.4 |
|
.1.3.6.1.4.1.5802.999999.1.3.1.5 |
||
.1.3.6.1.4.1.5802.999999.1.3.1.6 |
||
|
Enumeration
|
.1.3.6.1.4.1.5802.999999.1.3.1.7 |
|
|
codewordsSNMPv2-SMICounter32
|
.1.3.6.1.4.1.5802.999999.1.3.1.8 |
|
|
codewordsSNMPv2-SMICounter32
|
.1.3.6.1.4.1.5802.999999.1.3.1.9 |
Dependencies (10) 5 direct · 5 transitive Show tree and compile order Hide dependency details
Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.
Dependency tree
Dependency-first compile order
- SNMPv2-SMIrfc
- ELECTROLINE-GLOBAL-REGelectroline
- SNMPv2-CONFrfc
- DMON-MIBelectroline
- SNMPv2-TCrfc
- IANAifType-MIBrfc
- SNMPv2-MIBrfc
- IF-MIBrfc
- INET-ADDRESS-MIBrfc
- DOCS-IF-MIBrfc
- DMON-PHY-MIBelectrolineselected