DLINKSW-SYSTEM-FILE-MIB

        This MIB module defines objects for managing system critical files
(e.g configuration and firmware.)
    
Source file
DLINKSW-SYSTEM-FILE-MIB
Last revised
Identity
dlinkSwSystemFileMIB
Base OID
1.3.6.1.4.1.171.14.14
Imported Objects
DLINK-ID-REC-MIB dlinkIndustrialCommon
IF-MIB InterfaceIndexOrZero
INET-ADDRESS-MIB InetAddress InetAddressType
SNMPv2-CONF MODULE-COMPLIANCE (no object page) OBJECT-GROUP (no object page)
SNMPv2-SMI MODULE-IDENTITY (no object page) OBJECT-TYPE (no object page) Unsigned32
SNMPv2-TC DisplayString RowStatus TEXTUAL-CONVENTION (no object page) TruthValue
Net-SNMP examples using the d-link MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'DLINKSW-SYSTEM-FILE-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'DLINKSW-SYSTEM-FILE-MIB::dlinkSwSystemFileMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DLINKSW-SYSTEM-FILE-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DLINKSW-SYSTEM-FILE-MIB::dlinkSwSystemFileMIB'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (54)
.1.3.6.1.4.1.171.14.14
.1.3.6.1.4.1.171.14.14.0
.1.3.6.1.4.1.171.14.14.1
.1.3.6.1.4.1.171.14.14.1.1
OctetString
.1.3.6.1.4.1.171.14.14.1.1.1
OctetString
.1.3.6.1.4.1.171.14.14.1.1.2
.1.3.6.1.4.1.171.14.14.1.1.3
.1.3.6.1.4.1.171.14.14.1.1.4
.1.3.6.1.4.1.171.14.14.1.1.5
.1.3.6.1.4.1.171.14.14.1.1.5.1
Unsigned32
.1.3.6.1.4.1.171.14.14.1.1.5.1.1
Unsigned32
.1.3.6.1.4.1.171.14.14.1.1.5.1.2
OctetString
.1.3.6.1.4.1.171.14.14.1.1.5.1.3
.1.3.6.1.4.1.171.14.14.1.1.5.1.4
.1.3.6.1.4.1.171.14.14.1.1.6
.1.3.6.1.4.1.171.14.14.1.1.6.1
Unsigned32
.1.3.6.1.4.1.171.14.14.1.1.6.1.1
OctetString
.1.3.6.1.4.1.171.14.14.1.1.6.1.2
.1.3.6.1.4.1.171.14.14.1.2
.1.3.6.1.4.1.171.14.14.1.2.1
Unsigned32
.1.3.6.1.4.1.171.14.14.1.2.1.1
.1.3.6.1.4.1.171.14.14.1.2.1.10
.1.3.6.1.4.1.171.14.14.1.2.1.11
.1.3.6.1.4.1.171.14.14.1.2.1.12
Enumeration
.1.3.6.1.4.1.171.14.14.1.2.1.2
OctetString
.1.3.6.1.4.1.171.14.14.1.2.1.3
OctetString
.1.3.6.1.4.1.171.14.14.1.2.1.4
.1.3.6.1.4.1.171.14.14.1.2.1.5
.1.3.6.1.4.1.171.14.14.1.2.1.6
.1.3.6.1.4.1.171.14.14.1.2.1.7
.1.3.6.1.4.1.171.14.14.1.2.1.8
.1.3.6.1.4.1.171.14.14.1.2.1.9
.1.3.6.1.4.1.171.14.14.1.3
.1.3.6.1.4.1.171.14.14.1.3.1
Unsigned32
.1.3.6.1.4.1.171.14.14.1.3.1.1
.1.3.6.1.4.1.171.14.14.1.3.1.10
.1.3.6.1.4.1.171.14.14.1.3.1.11
Enumeration
.1.3.6.1.4.1.171.14.14.1.3.1.2
OctetString
.1.3.6.1.4.1.171.14.14.1.3.1.3
.1.3.6.1.4.1.171.14.14.1.3.1.4
.1.3.6.1.4.1.171.14.14.1.3.1.5
.1.3.6.1.4.1.171.14.14.1.3.1.6
.1.3.6.1.4.1.171.14.14.1.3.1.7
.1.3.6.1.4.1.171.14.14.1.3.1.8
.1.3.6.1.4.1.171.14.14.1.3.1.9
.1.3.6.1.4.1.171.14.14.1.4
.1.3.6.1.4.1.171.14.14.1.4.1
.1.3.6.1.4.1.171.14.14.1.4.2
.1.3.6.1.4.1.171.14.14.1.4.3
Enumeration
.1.3.6.1.4.1.171.14.14.1.5
Enumeration
.1.3.6.1.4.1.171.14.14.1.6
.1.3.6.1.4.1.171.14.14.2
.1.3.6.1.4.1.171.14.14.2.1
.1.3.6.1.4.1.171.14.14.2.2
Dependencies (9) 6 direct · 3 transitive Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Conformance Groups (5)
A collection of objects providing information about the boot configuration
and boot image.
.1.3.6.1.4.1.171.14.14.2.2.1
A collection of objects providing information for the parameters
of the copy function.
.1.3.6.1.4.1.171.14.14.2.2.2
A collection of objects providing information for the parameters
of the configure replace function.
.1.3.6.1.4.1.171.14.14.2.2.3
A collection of objects providing information about the interface whose
IP address will be used as the source address for initiating TFTP/FTP/RCP
packets.
.1.3.6.1.4.1.171.14.14.2.2.4
An object providing the clear function.
.1.3.6.1.4.1.171.14.14.2.2.5
Compliance Statements (1)

OID .1.3.6.1.4.1.171.14.14.2.1.1
The compliance statement for entities which implement the
DLINKSW-SYSTEM-FILE-MIB.
Required groups
Object refinements
ObjectAccessSyntaxDescription
dsfCopyType
It is compliant to support only a subset of
values: 'localToLocal', 'localToTftpRemote', and
'tftpRemoteToLocal'.
dsfCfgReplaceSrcType
It is compliant to support only a subset of
values: 'local' and 'tftpRemote'.
dsfIpTftpSrcIf readonly
read-write access is not required.
dsfIpFtpSrcIf readonly
This object is required when FTP and configurable source
interface are supported.
dsfIpRcpSrcIf readonly
This object is required when RCP and configurable source
interface are supported.
Notifications / Traps (5)
NameOIDDescription
.1.3.6.1.4.1.171.14.14.0.1
The notification is sent when the user uploads
image file successfully.
.1.3.6.1.4.1.171.14.14.0.2
The notification is sent when the user downloads
image file successfully.
.1.3.6.1.4.1.171.14.14.0.3
The notification is sent when the user uploads
configuration file successfully.
.1.3.6.1.4.1.171.14.14.0.4
The notification is sent when the user downloads
configuration file successfully.
.1.3.6.1.4.1.171.14.14.0.5
The notification is sent when the user saves
configuration file successfully.