DLINKSW-IP-FILTER-MIB Table View

This table contains route-map name.

dRouteMapEntry row .1.3.6.1.4.1.171.12.117.1.1.1

Each entry is a specific name of a route map.

Indexes

dRouteMapName

Column	Syntax	OID
dRouteMapName The name of the route map.	OctetString Constraints: range: 1-16	.1.3.6.1.4.1.171.12.117.1.1.1.1
dRouteMapRowStatus This object indicates the status of the route-map. Only createAndGo(4) and destroy(6) are supported.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.171.12.117.1.1.1.99

This table contains entries for route maps instances.

dRouteMapSeqEntry row .1.3.6.1.4.1.171.12.117.1.2.1

Each entry is a specific sequence of a route map.

Indexes

dRouteMapName dRouteMapSeqNum

Column	Syntax	OID
dRouteMapSeqNum Multiple entries of the same route map can be created by assigning a different sequence number to it. Each instance is identified by the route map name and the sequence number. The value of the sequence number associa…	Unsigned32 Constraints: range: 1-65535	.1.3.6.1.4.1.171.12.117.1.2.1.1
dRouteMapSeqMatchAction Indicates the action performed by this route map instance.	Enumerationr/w Enumerated Values: 1 permit 2 deny	.1.3.6.1.4.1.171.12.117.1.2.1.2
dRouteMapSeqRowStatus Controls creation/deletion of entries in this table according to the RowStatus textual convention. The writable columns in a row cannot be changed if the row is active. In other words, once created, dRouteMapMatchAction…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.171.12.117.1.2.1.99

This table contains entries for instances of the route map clause
elements.

dRouteMapClauseEntry row .1.3.6.1.4.1.171.12.117.1.3.1

Each entry describes the characteristics of one route map clause
element instance.

Indexes

dRouteMapName dRouteMapSeqNum dRouteMapClauseTypeId dRouteMapClauseSubId

Column	Syntax	OID
dRouteMapClauseTypeId The type of match or set command in this entry. A route map entry can contain multiple match and set statements. To match a route against a route map entry, all of the match clause elements in a route map sequence must …	Enumeration Enumerated Values: 1 matchIpAccessList 2 matchIpPrefixList 3 matchIpv6AccessList 4 matchAsPath 5 matchCommunity 7 macthIpNexthop 8 matchIpNexthopPrefixList 9 matchMetric 10 matchInterface 11 matchRouteType 12 matchIpRouteSource 13 matchIpv6Nexthop 14 matchIpv6NexthopPrefixList 15 matchIpv6PrefixList 129 setIpNexthop 131 setIpv6Nexthop 136 setAsPath 137 setCommunity 139 setMetric 140 setLocalPreference 141 setOrigin 142 setWeight 143 setDampening 144 setMetricType	.1.3.6.1.4.1.171.12.117.1.3.1.1
dRouteMapClauseSubId Indicates the clause element sub ID. Because for some clause types (e.g. setIpNexthop), multiple instances can be created, this object is used solely to distinguish specific instance of the element. If the created inst…	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.171.12.117.1.3.1.2
dRouteMapClauseAddOption This indicates the additional option selected along with the main option (dRouteMapClauseTypeId) whenever it applies. For more information on how to map this object value to each value, refer to the route-map clauses ta…	Enumerationr/w Enumerated Values: 0 notApplicable 1 exact 2 additive 3 communityNone	.1.3.6.1.4.1.171.12.117.1.3.1.3
dRouteMapClauseElementValue This represents match and set clauses' variable element instance values in character string form. Whatever may be the data type of the attribute element instance value, it is always interpreted as a set of characters f…	OctetStringr/w Constraints: range: 0-255	.1.3.6.1.4.1.171.12.117.1.3.1.4
dRouteMapClauseRowStatus Controls creation/deletion of entries in this table according to the RowStatus textual convention. The writable columns in a row cannot be changed if the row is active. In other words, the table entry elements may not…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.171.12.117.1.3.1.99

This table contains name for IP access list.

dAccessListEntry row .1.3.6.1.4.1.171.12.117.1.4.1

An entry contains the information of IP access list.

Indexes

dAccessListName dAccessListAddrType

Column	Syntax	OID
dAccessListName The name of the IP access list.	OctetString Constraints: range: 1-16	.1.3.6.1.4.1.171.12.117.1.4.1.1
dAccessListAddrType This object indicates the address type of the access list.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.171.12.117.1.4.1.2
dAccessListRowStatus This object indicates the status of this entry. Only createAndGo(4) and destroy(6) are supported.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.171.12.117.1.4.1.99

This table contains rules for IP access list.

dAccessListRuleEntry row .1.3.6.1.4.1.171.12.117.1.5.1

An entry contains one rule of the IP access list.

Indexes

dAccessListName dAccessListAddrType dAccessListRuleMatchAction dAccessListRuleNetAddr dAccessListRulePfxLen

Column	Syntax	OID
dAccessListRuleMatchAction Indicates the action performed for this IP access list.	Enumeration Enumerated Values: 1 permit 2 deny	.1.3.6.1.4.1.171.12.117.1.5.1.1
dAccessListRuleNetAddr Indicates the network address.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.171.12.117.1.5.1.2
dAccessListRulePfxLen Indicates the prefix length of the network address.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.171.12.117.1.5.1.3
dAccessListRuleRowStatus This object indicates the status of this entry. Only createAndGo(4) and destroy(6) are supported.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.171.12.117.1.5.1.99

This table contains name for IP prefix list.

dPrefixListEntry row .1.3.6.1.4.1.171.12.117.1.6.1

An entry contains the information of IP prefix list.

Indexes

dPrefixListName dPrefixListAddrType

Column	Syntax	OID
dPrefixListName The name of the IP prefix list.	OctetString Constraints: range: 1-16	.1.3.6.1.4.1.171.12.117.1.6.1.1
dPrefixListAddrType This object indicates the address type of the prefix.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.171.12.117.1.6.1.2
dPrefixListRowStatus This object indicates the status of this entry. Only createAndGo(4) and destroy(6) are supported.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.171.12.117.1.6.1.99

A table consists of a list of IP prefixes. 
The initial 2 index elements identify the prefix list that a prefix
belongs to.

dPrefixListRuleEntry row .1.3.6.1.4.1.171.12.117.1.7.1

An entry contains the information of an IP prefix.

Indexes

dPrefixListName dPrefixListAddrType dPrefixListRuleSeqNum

Column	Syntax	OID
dPrefixListRuleSeqNum The checking sequence of the prefix within a prefix list. The lower the number is, the higher the precedence of the permit/deny rule. The special value of 0 means the sequence number will be automatically d…	Unsigned32 Constraints: range: 0-65535	.1.3.6.1.4.1.171.12.117.1.7.1.1
dPrefixListRuleAction This object indicates whether to permit or deny the matched route entry.	Enumerationr/w Enumerated Values: 1 permit 2 deny	.1.3.6.1.4.1.171.12.117.1.7.1.2
dPrefixListRuleNetAddr This object indicates the network address (prefix).	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.171.12.117.1.7.1.3
dPrefixListRulePrefixLen The length of network address (prefix).	INET-ADDRESS-MIBInetAddressPrefixLengthr/w Type Constraints: range: 0..2040	.1.3.6.1.4.1.171.12.117.1.7.1.4
dPrefixListRuleGeValue The minimum prefix length of the route that can be matched. The special value of 0 indicates this object is not specified.	Unsigned32r/w Constraints: range: 0-128	.1.3.6.1.4.1.171.12.117.1.7.1.5
dPrefixListRuleLeValue The maximum prefix length of the route that can be matched. The special value of 0 indicates this object is not specified.	Unsigned32r/w Constraints: range: 0-128	.1.3.6.1.4.1.171.12.117.1.7.1.6
dPrefixListRuleHitCount Counter that the prefix list entry has been matched.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.171.12.117.1.7.1.7
dPrefixListRuleRowStatus This object indicates the status of this entry. Only createAndGo(4) and destroy(6) are supported.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.171.12.117.1.7.1.99

A table consists of a list of descriptions for IP prefix lists.

dPrefixListDescEntry row .1.3.6.1.4.1.171.12.117.1.8.1

An entry contains the description of an IP prefix list.

Indexes

dPrefixListName dPrefixListAddrType

Column	Syntax	OID
dPrefixListDescContent Specify the description for prefix list.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.171.12.117.1.8.1.1
dPrefixListDescRowStatus This object indicates the status of this entry. Only createAndGo(4) and destroy(6) are supported.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.171.12.117.1.8.1.99