DLINKSW-IP-FILTER-MIB

        This MIB module defines objects for IP filter.
    
Source file
DLINKSW-IP-FILTER-MIB
Last revised
Identity
dlinkSwIPFilterMIB
Base OID
1.3.6.1.4.1.171.12.117
Imported Objects
DLINK-ID-REC-MIB dlink-common-mgmt
INET-ADDRESS-MIB InetAddress InetAddressPrefixLength InetAddressType
SNMPv2-CONF MODULE-COMPLIANCE (no object page) OBJECT-GROUP (no object page)
SNMPv2-SMI Integer32 MODULE-IDENTITY (no object page) OBJECT-TYPE (no object page) Unsigned32
SNMPv2-TC DisplayString RowStatus
Net-SNMP examples using the d-link MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'DLINKSW-IP-FILTER-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'DLINKSW-IP-FILTER-MIB::dlinkSwIPFilterMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DLINKSW-IP-FILTER-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DLINKSW-IP-FILTER-MIB::dlinkSwIPFilterMIB'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (52)
.1.3.6.1.4.1.171.12.117
.1.3.6.1.4.1.171.12.117.0
.1.3.6.1.4.1.171.12.117.1
.1.3.6.1.4.1.171.12.117.1.1
.1.3.6.1.4.1.171.12.117.1.1.1
OctetString
.1.3.6.1.4.1.171.12.117.1.1.1.1
.1.3.6.1.4.1.171.12.117.1.1.1.99
.1.3.6.1.4.1.171.12.117.1.2
.1.3.6.1.4.1.171.12.117.1.2.1
Unsigned32
.1.3.6.1.4.1.171.12.117.1.2.1.1
Enumeration
.1.3.6.1.4.1.171.12.117.1.2.1.2
.1.3.6.1.4.1.171.12.117.1.2.1.99
.1.3.6.1.4.1.171.12.117.1.3
.1.3.6.1.4.1.171.12.117.1.3.1
Enumeration
.1.3.6.1.4.1.171.12.117.1.3.1.1
Integer32
.1.3.6.1.4.1.171.12.117.1.3.1.2
Enumeration
.1.3.6.1.4.1.171.12.117.1.3.1.3
OctetString
.1.3.6.1.4.1.171.12.117.1.3.1.4
.1.3.6.1.4.1.171.12.117.1.3.1.99
.1.3.6.1.4.1.171.12.117.1.4
.1.3.6.1.4.1.171.12.117.1.4.1
OctetString
.1.3.6.1.4.1.171.12.117.1.4.1.1
.1.3.6.1.4.1.171.12.117.1.4.1.2
.1.3.6.1.4.1.171.12.117.1.4.1.99
.1.3.6.1.4.1.171.12.117.1.5
.1.3.6.1.4.1.171.12.117.1.5.1
Enumeration
.1.3.6.1.4.1.171.12.117.1.5.1.1
.1.3.6.1.4.1.171.12.117.1.5.1.2
.1.3.6.1.4.1.171.12.117.1.5.1.3
.1.3.6.1.4.1.171.12.117.1.5.1.99
.1.3.6.1.4.1.171.12.117.1.6
.1.3.6.1.4.1.171.12.117.1.6.1
OctetString
.1.3.6.1.4.1.171.12.117.1.6.1.1
.1.3.6.1.4.1.171.12.117.1.6.1.2
.1.3.6.1.4.1.171.12.117.1.6.1.99
.1.3.6.1.4.1.171.12.117.1.7
.1.3.6.1.4.1.171.12.117.1.7.1
Unsigned32
.1.3.6.1.4.1.171.12.117.1.7.1.1
Enumeration
.1.3.6.1.4.1.171.12.117.1.7.1.2
.1.3.6.1.4.1.171.12.117.1.7.1.3
.1.3.6.1.4.1.171.12.117.1.7.1.4
Unsigned32
.1.3.6.1.4.1.171.12.117.1.7.1.5
Unsigned32
.1.3.6.1.4.1.171.12.117.1.7.1.6
.1.3.6.1.4.1.171.12.117.1.7.1.7
.1.3.6.1.4.1.171.12.117.1.7.1.99
.1.3.6.1.4.1.171.12.117.1.8
.1.3.6.1.4.1.171.12.117.1.8.1
.1.3.6.1.4.1.171.12.117.1.8.1.1
.1.3.6.1.4.1.171.12.117.1.8.1.99
.1.3.6.1.4.1.171.12.117.2
.1.3.6.1.4.1.171.12.117.2.1
.1.3.6.1.4.1.171.12.117.2.2
Dependencies (6) 5 direct · 1 transitive Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Dependency-first compile order
  1. RFC1155-SMIrfc
  2. DLINK-ID-REC-MIBd-link
  3. SNMPv2-SMIrfc
  4. SNMPv2-TCrfc
  5. INET-ADDRESS-MIBrfc
  6. SNMPv2-CONFrfc
  7. DLINKSW-IP-FILTER-MIBd-linkselected
Conformance Groups (8)
These objects are used for managing/monitoring route map configurations.
.1.3.6.1.4.1.171.12.117.2.1.1
These objects are used for managing/monitoring route map sequence configurations.
.1.3.6.1.4.1.171.12.117.2.1.2
These objects are used for managing/monitoring route map clauses.
.1.3.6.1.4.1.171.12.117.2.1.3
These objects are used for managing/monitoring IP access list configuration.
.1.3.6.1.4.1.171.12.117.2.1.4
These objects are used for managing/monitoring IP access list rules configuration.
.1.3.6.1.4.1.171.12.117.2.1.5
These objects are used for managing/monitoring route map clauses.
.1.3.6.1.4.1.171.12.117.2.1.6
These objects are used for managing/monitoring IP access list configuration.
.1.3.6.1.4.1.171.12.117.2.1.7
These objects are used for managing/monitoring IP access list rules configuration.
.1.3.6.1.4.1.171.12.117.2.1.8
Compliance Statements (1)

OID .1.3.6.1.4.1.171.12.117.2.2.1
The compliance statement
Required groups