DLINKPRIME-VLAN-MIB Table View

This table provides mechanism to configure port-specific VLAN
function.

dpVlanPortIfCtrlEntry row .1.3.6.1.4.1.171.15.26.1.1.1

A table entry represents the VLAN configuration on a port.
This table is an extension to dot1qPortVlanTable which is defined at
Q-BRIDGE-MIB.

Indexes

BRIDGE-MIBdot1dBasePort

Column	Syntax	OID
dpVlanPortIfMode This object indicates VLAN mode for the port. access - this port will be untagged member of the access VLAN configured for the port. hybrid - the port can be untagged or tagged member of all VLANs con…	Enumerationr/w Enumerated Values: 1 access 2 hybrid 3 trunk 4 dot1qTunnel 5 privateVlanHost 6 privateVlanPromiscuous 7 privateVlanTrunkPromiscuous 8 privateVlanTrunkSecondary	.1.3.6.1.4.1.171.15.26.1.1.1.1
dpVlanPortIfTrunkNativeVlanTagged This object indicates whether enable the tagging mode of the native VLAN on the interface. Note: This value is meaningful only when the VLAN mode of the port is one of the 'trunk', 'privateVlanTrunk…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.171.15.26.1.1.1.2
dpVlanPortIfAcceptableFrameTypes This object indicates the acceptable frame types on the interface. 'admitAll' - Permits both tagged and untagged packet. 'admitUntaggedAndPriority' - Only untagged or Priority-Tagged packets …	Enumerationr/w Enumerated Values: 1 admitAll 2 admitUntaggedAndPriority 3 admitTagged	.1.3.6.1.4.1.171.15.26.1.1.1.3
dpVlanPortIfTagAllowVlanLstFirst2K This object specifies the VLANs in a string of octets containing one bit per VLAN for VLANs 1 to 2048. If the bit is set to '1', then the interface is allowed to be the VLAN's tagged member. …	Dlink2kVlanListr/w Type Constraints: range: 256	.1.3.6.1.4.1.171.15.26.1.1.1.4
dpVlanPortIfTagAllowVlanLstSecond2K This object specifies the VLANs in a string of octets containing one bit per VLAN for VLANs 2049 to 4094. If the bit is set to '1', then the interface is allowed to be the VLAN's tagged member. …	Dlink2kVlanListr/w Type Constraints: range: 256	.1.3.6.1.4.1.171.15.26.1.1.1.5
dpVlanPortIfUntagAllowVlanLstFirst2K This object specifies the VLANs in a string of octets containing one bit per VLAN for VLANs 1 to 2048. If the bit is set to '1', then the interface is allowed to be the VLAN's unta…	Dlink2kVlanListr/w Type Constraints: range: 256	.1.3.6.1.4.1.171.15.26.1.1.1.6
dpVlanPortIfUntagAllowVlanLstSecond2K This object specifies the VLANs in a string of octets containing one bit per VLAN for VLANs 2049 to 4094. If the bit is set to '1', then the interface is allowed to be the VLAN's u…	Dlink2kVlanListr/w Type Constraints: range: 256	.1.3.6.1.4.1.171.15.26.1.1.1.7

A table containing static configuration information for
each VLAN configured into the device by (local or
network) management.  All entries are permanent and will
be restored after the device is reset.

dpPortBasedVlanEntry row .1.3.6.1.4.1.171.15.26.1.4.2.1

Static information for a Port-based VLAN configured into the
device by (local or network) management.

Indexes

dpPortBasedVlanIndex

Column	Syntax	OID
dpPortBasedVlanIndex Port-based VLAN index.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.171.15.26.1.4.2.1.1
dpPortBasedVlanEgressPorts The set of ports that are permanently assigned to the egress list for this VLAN by management.	Q-BRIDGE-MIBPortListr/w	.1.3.6.1.4.1.171.15.26.1.4.2.1.2
dpPortBasedVlanRowStatus This object indicates the status of this entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.171.15.26.1.4.2.1.3