DLINKPRIME-QOS-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
3
Rows
3
Columns
4

dpQosSchedulingModeTable

table
.1.3.6.1.4.1.171.15.13.1.1.1 · 1 row entry · 1 columns
Open in standard view
Uses the d-link variant from /opt/observium/mibs/d-link.
Command help
Walk dpQosSchedulingModeTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DLINKPRIME-QOS-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DLINKPRIME-QOS-MIB::dpQosSchedulingModeTable' 
This table consists of a list of scheduling mechanism configurations
for ports.
dpQosSchedulingModeEntry row .1.3.6.1.4.1.171.15.13.1.1.1.1
An entry configures the scheduling mode on an interface.
Indexes
Column Syntax OID
dpQosSchedulingMode
This object indicates the mechanism of QoS scheduling on the interface.
Enumerationr/w
Enumerated Values:
1sp
2wrr
 .1.3.6.1.4.1.171.15.13.1.1.1.1.1

dpQosBandwidthCtrlTable

table
.1.3.6.1.4.1.171.15.13.1.2.1 · 1 row entry · 2 columns
Open in standard view
Uses the d-link variant from /opt/observium/mibs/d-link.
Command help
Walk dpQosBandwidthCtrlTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DLINKPRIME-QOS-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DLINKPRIME-QOS-MIB::dpQosBandwidthCtrlTable' 
A table consists of a list of configurations for bandwidth control 
on interfaces.
dpQosBandwidthCtrlEntry row .1.3.6.1.4.1.171.15.13.1.2.1.1
An entry configures the bandwidth on an interface.
An entry will exist for every applicable port.
Indexes
Column Syntax OID
dpQosBandwidthRxRate
This object indicates Rx Rate of the specified port.
The special value of 0 indicates there is no bandwidth
limit for ingress packets.
Enumerationr/w
Enumerated Values:
1noLimit
2limit_8Kbps
3limit_16Kbps
4limit_32Kbps
5limit_64Kbps
6limit_128Kbps
7limit_256Kbps
8limit_512Kbps
9limit_1Mbps
10limit_2Mbps
11limit_4Mbps
12limit_8Mbps
13limit_16Mbps
14limit_32Mbps
15limit_64Mbps
16limit_128Mbps
17limit_256Mbps
18limit_512Mbps
 .1.3.6.1.4.1.171.15.13.1.2.1.1.1
dpQosBandwidthTxRate
This object indicates Tx Rate of the specified port.
The special value of 0 indicates there is no bandwidth
limit for egress packets.
It is based on the dpQosBandwidthTxRateMode field and
Enumerationr/w
Enumerated Values:
1noLimit
3limit_16Kbps
4limit_32Kbps
5limit_64Kbps
6limit_128Kbps
7limit_256Kbps
8limit_512Kbps
9limit_1Mbps
10limit_2Mbps
11limit_4Mbps
12limit_8Mbps
13limit_16Mbps
14limit_32Mbps
15limit_64Mbps
16limit_128Mbps
17limit_256Mbps
18limit_512Mbps
 .1.3.6.1.4.1.171.15.13.1.2.1.1.2

dpQosCosCfgTable

table
.1.3.6.1.4.1.171.15.13.1.3.1 · 1 row entry · 1 columns
Open in standard view
Uses the d-link variant from /opt/observium/mibs/d-link.
Command help
Walk dpQosCosCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DLINKPRIME-QOS-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DLINKPRIME-QOS-MIB::dpQosCosCfgTable' 
This table consists of a list of CoS configurations
for ports.
dpQosCosCfgEntry row .1.3.6.1.4.1.171.15.13.1.3.1.1
An entry configures the CoS on an interface.
Indexes
Column Syntax OID
dpQosCfgSetCos
This object indicates the CoS on the interface.
Enumerationr/w
Enumerated Values:
1low
2medium
3high
4highest
 .1.3.6.1.4.1.171.15.13.1.3.1.1.1