DLINKPRIME-LBD-MIB

        This MIB module defines objects for loopback detection.
    
Source file
DLINKPRIME-LBD-MIB
Last revised
Identity
dlinkPrimeLoopbackDetectMIB
Base OID
1.3.6.1.4.1.171.15.7
Imported Objects
DLINK-ID-REC-MIB dlinkPrimeCommon
IF-MIB InterfaceIndex
Q-BRIDGE-MIB VlanId
SNMPv2-CONF MODULE-COMPLIANCE (no object page) OBJECT-GROUP (no object page)
SNMPv2-SMI MODULE-IDENTITY (no object page) NOTIFICATION-TYPE (no object page) OBJECT-TYPE (no object page)
SNMPv2-TC DisplayString TruthValue
Net-SNMP examples using the d-link MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'DLINKPRIME-LBD-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'DLINKPRIME-LBD-MIB::dlinkPrimeLoopbackDetectMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DLINKPRIME-LBD-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DLINKPRIME-LBD-MIB::dlinkPrimeLoopbackDetectMIB'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (17)
.1.3.6.1.4.1.171.15.7
.1.3.6.1.4.1.171.15.7.0
.1.3.6.1.4.1.171.15.7.1
.1.3.6.1.4.1.171.15.7.1.1
secondsInteger32
.1.3.6.1.4.1.171.15.7.1.2
secondsInteger32
.1.3.6.1.4.1.171.15.7.1.3
.1.3.6.1.4.1.171.15.7.1.4
.1.3.6.1.4.1.171.15.7.1.5
.1.3.6.1.4.1.171.15.7.1.5.1
.1.3.6.1.4.1.171.15.7.1.5.1.1
.1.3.6.1.4.1.171.15.7.1.5.1.2
Enumeration
.1.3.6.1.4.1.171.15.7.1.5.1.3
.1.3.6.1.4.1.171.15.7.1.8
.1.3.6.1.4.1.171.15.7.1.8.1
.1.3.6.1.4.1.171.15.7.2
.1.3.6.1.4.1.171.15.7.2.1
.1.3.6.1.4.1.171.15.7.2.2
Dependencies (18) 6 direct · 12 transitive Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Conformance Groups (3)
A collection of objects providing management of the loopback
detection feature.
.1.3.6.1.4.1.171.15.7.2.2.1
A collection of objects providing the per-interface control of
loopback detection.
.1.3.6.1.4.1.171.15.7.2.2.2
A collection of notifications used for monitoring the hosts under the
control of loopback detection.
.1.3.6.1.4.1.171.15.7.2.2.3
Compliance Statements (1)

OID .1.3.6.1.4.1.171.15.7.2.1.1
The compliance statement for entities which implement the
DLINKPRIME-LBD-MIB.
Required groups
mandatory dpLbdCfgGroup
mandatory dpLbdIfCfgGroup
optional dpLbdCtrlModeGroup This group is mandatory if vlan-based mode is supported.
optional dpLbdVlanCtrlGroup This group is mandatory if vlan-based mode is supported.
Notifications / Traps (2)
NameOIDDescription
.1.3.6.1.4.1.171.15.7.0.1
This trap is sent when an interface loop occurs.
.1.3.6.1.4.1.171.15.7.0.2
This trap is sent when an interface loop recovery.