DLINK-PORT-SECURITY-MIB Table View

A port security feature which controls the address learning capability and
traffic forwarding decisions. Each port can be enabled or disabled for this function.
When it is enabled and a number is given said N, which allows N addresses to be
learned on this port, the first N learned addresses are locked at this port as
static entries. When the learned addresses number reaches N, any incoming packet
without learned source addresses are discarded (e.g. dropped) and no more new
addresses can be learned on this port.

swPortSecPortEntry row .1.3.6.1.4.1.171.12.63.3.1.1.1

A list of information contained in the swPortSecPortTable.

Indexes

swPortSecPortIndex

Column	Syntax	OID
swPortSecPortIndex Indicates the secured port to lock address learning.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.171.12.63.3.1.1.1.1
swPortSecPortMaxLernAddr Indicates the allowable number of addresses to be learned on this port. The max entry range is (0..N). The value N means the max number and is determined by the project itself.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.171.12.63.3.1.1.1.2
swPortSecPortLockAddrMode Indicates the mode of locking address. In deleteOnTimeout(2) mode, the locked addresses can be aged out after the aging timer expires. In this mode, when the locked address is aged out, the number of addresses that can …	Enumerationr/w Enumerated Values: 1 permanent 2 deleteOnTimeout 3 deleteOnReset	.1.3.6.1.4.1.171.12.63.3.1.1.1.3
swPortSecPortAdmState Indicates the administration state of the locking address.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.171.12.63.3.1.1.1.4
swPortSecPortClearCtrl Used to clear port security entries by port. Setting this value to 'start' will execute the clear action. Once cleared, the value returns to 'other'.	Enumerationr/w Enumerated Values: 1 other 2 start	.1.3.6.1.4.1.171.12.63.3.1.1.1.5
swPortSecPortViolationAction Used to indicates the action when violation occurs. When the number of secure MAC address reaches the maximum learning number on the port, for drop action, new entry will be dropped and for shutdown action, the port …	Enumerationr/w Enumerated Values: 1 drop 2 shutdown	.1.3.6.1.4.1.171.12.63.3.1.1.1.6

A port security feature which controls the address leaning capability.
When number is given said N, which allows N addresses to be learned on this VLAN,
the first N learned addresses are locked at this VLAN as static entries.
When the learned addresses number reaches N, any incoming packet
without learned source addresses are discarded (e.g. dropped) and no more new
addresses can be learned on this VLAN.

swPortSecVLANEntry row .1.3.6.1.4.1.171.12.63.3.2.1.1

A list of information contained in the swPortSecVLANTable.

Indexes

swPortSecVLANID

Column	Syntax	OID
swPortSecVLANID Indicates the secured VLAN to lock address learning.	Integer32 Constraints: range: 1-4094	.1.3.6.1.4.1.171.12.63.3.2.1.1.1
swPortSecVLANMaxLernAddr Indicates allowable number of addresses to be learned on this VLAN. A value of -1 means no-limit. The default value is no-limit. The max entry range is (0..N). The value N means the max number and is det…	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.171.12.63.3.2.1.1.2
swPortSecVLANClearCtrl Used to clear port security entries by VLAN. Setting this value to 'start' will execute the clear action. Once cleared, the value returns to 'other'.	Enumerationr/w Enumerated Values: 1 other 2 start	.1.3.6.1.4.1.171.12.63.3.2.1.1.3

A port security feature which controls the address learning capability.
When number is given said N, which allows N addresses to be learned
on this VLAN from the special port, the first N learned addresses are locked
at this VLAN from the special port as static entries.
When the learned addresses number reaches N, any incoming packet
without learned source addresses are discarded (e.g. dropped) and no more new
addresses can be learned on this VLAN from the special port.

swPortSecVLANOnPortEntry row .1.3.6.1.4.1.171.12.63.3.3.1.1

A list of information contained in the swPortSecVLANOnPortTable.

Indexes

swPortSecPortIndex swPortSecVLANID

Column	Syntax	OID
swPortSecVLANOnPortMaxLernAddr Indicates allowable number of addresses to be learned on this VLAN from the special port. A value of -1 means no-limit. The default value is no-limit. Only VLANs with limitations will be displayed in this table. …	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.171.12.63.3.3.1.1.1
swPortSecVLANOnPortAddCtrl other (1): When user gets this object, it always returns other(1). add (2): Used to configure the VLAN limit from the special port. If 'add' is selected, swPortSecVLANOnPortMaxLernAddr must be set to a…	Enumerationr/w Enumerated Values: 1 other 2 add	.1.3.6.1.4.1.171.12.63.3.3.1.1.2

This table is used to show port security entries.

swPortSecEntriesEntry row .1.3.6.1.4.1.171.12.63.3.4.1

A list of information contained in the swPortSecEntriesTable.

Indexes

swPortSecMac swPortSecVID

Column	Syntax	OID
swPortSecMac Specifies a MAC address.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.171.12.63.3.4.1.1
swPortSecVID Indicates the VLAN ID.	Integer32 Constraints: range: 1-4094	.1.3.6.1.4.1.171.12.63.3.4.1.2
swPortSecPort Indicates the port.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.171.12.63.3.4.1.3
swPortSecDelCtrl Used to delete this port security entry. Setting this value to 'start' will execute the delete action. Once deleted, the value returns to 'other'.	Enumerationr/w Enumerated Values: 1 other 2 start	.1.3.6.1.4.1.171.12.63.3.4.1.4