DLINK-3100-MNGINF-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
2
Rows
2
Columns
18

rlMngInfListTable

table
.1.3.6.1.4.1.171.10.94.89.89.89.4 · 1 row entry · 8 columns
Open in standard view 
The table specifies all defined Access Lists definitions for IPv4 addresses.
Provide backward compatibility for previous versions.
rlMngInfListEntry entry .1.3.6.1.4.1.171.10.94.89.89.89.4.1
Row definition for this table.
Indexes
rlMngInfListName rlMngInfListPriority
Column Syntax OID
rlMngInfListName
The Name of the Access List.
OctetString
Constraints:
range: 1-32
 .1.3.6.1.4.1.171.10.94.89.89.89.4.1.1
rlMngInfListPriority
The Priority value.
Unsigned32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.171.10.94.89.89.89.4.1.2
rlMngInfListIfIndex
The IfIndex value. The IfIndex can be configured to be 0, which means don't care value.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.171.10.94.89.89.89.4.1.3
rlMngInfListIpAddr
The IP address. The IP address can be configured to be 0, which means don't care value.
RFC1155-SMIIpAddressr/w
Textual Convention: RFC1155-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.171.10.94.89.89.89.4.1.4
rlMngInfListIpNetMask
The subnet mask associated with the IP address of this entry. The value of the mask is
an IP address with all the network bits set to 1 and all the hosts bits set to 0.
RFC1155-SMIIpAddressr/w
Textual Convention: RFC1155-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.171.10.94.89.89.89.4.1.5
rlMngInfListService
Service type. The Service type address can be configured to be 0,
which means any of Telnet, SNMP, HTTP, HTTPS, SSH.
RlMngInfServiceTyper/w
Textual Convention: RlMngInfServiceType Enumeration
Type Values:
0dontCare
1telnet
2snmp
3http
4https
5ssh
6icmp
 .1.3.6.1.4.1.171.10.94.89.89.89.4.1.6
rlMngInfListAction
Action type. Can be permit or deny.
RlMngInfActionTyper/w
Textual Convention: RlMngInfActionType Enumeration
Type Values:
0permit
1deny
 .1.3.6.1.4.1.171.10.94.89.89.89.4.1.7
rlMngInfListRowStatus
The row status variable, used according to
row installation and removal conventions.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.171.10.94.89.89.89.4.1.8

rlMngInfListInetTable

table
.1.3.6.1.4.1.171.10.94.89.89.89.6 · 1 row entry · 10 columns
Open in standard view 
The table specifies all defined Access Lists definitions  definitions
for both IPv4 and IPv6 addresses.
rlMngInfListInetEntry entry .1.3.6.1.4.1.171.10.94.89.89.89.6.1
Row definition for this table.
Indexes
rlMngInfListInetName rlMngInfListInetPriority
Column Syntax OID
rlMngInfListInetName
The Name of the Access List.
OctetString
Constraints:
range: 1-32
 .1.3.6.1.4.1.171.10.94.89.89.89.6.1.1
rlMngInfListInetPriority
The Priority value.
Unsigned32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.171.10.94.89.89.89.6.1.2
rlMngInfListInetIfIndex
The IfIndex value. The IfIndex can be configured to be 0, which means don't care value.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.171.10.94.89.89.89.6.1.3
rlMngInfListInetIpAddrType
The Inet address type.
INET-ADDRESS-MIBInetAddressTyper/w
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.171.10.94.89.89.89.6.1.4
rlMngInfListInetIpAddr
The Inet address.Used for both IPv4 and IPv6 addresses.
The InetIpAddress can be configured to be 0.0.0.0 and address type IPv4 ,
which means ignored value.
INET-ADDRESS-MIBInetAddressr/w
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.171.10.94.89.89.89.6.1.5
rlMngInfListInetIpNetMask
This field will used in case of IPv4 addresses . For IPv6 this field ignored.
Default value 255.255.255.255.
RFC1155-SMIIpAddressr/w
Textual Convention: RFC1155-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.171.10.94.89.89.89.6.1.6
rlMngInfListInetService
Service type. The Service type address can be configured to be 0,
which means any of Telnet, SNMP, HTTP, HTTPS, SSH.
RlMngInfServiceTyper/w
Textual Convention: RlMngInfServiceType Enumeration
Type Values:
0dontCare
1telnet
2snmp
3http
4https
5ssh
6icmp
 .1.3.6.1.4.1.171.10.94.89.89.89.6.1.7
rlMngInfListInetAction
Action type. Can be permit or deny.
RlMngInfActionTyper/w
Textual Convention: RlMngInfActionType Enumeration
Type Values:
0permit
1deny
 .1.3.6.1.4.1.171.10.94.89.89.89.6.1.8
rlMngInfListInetRowStatus
The row status variable, used according to
row installation and removal conventions.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.171.10.94.89.89.89.6.1.9
rlMngInfListInetIPv6PrefixLength
IPv6 prefix length.This field provide IPv6 prefix length (mask)
for IPv6 only.In case of IPv4 this field will ignored
Integer32r/w
Constraints:
range: 0-128
 .1.3.6.1.4.1.171.10.94.89.89.89.6.1.10