DLINK-3100-COPY-MIB Table View

The (conceptual) table listing only one entry at a time
with parameters needed for configuration
of the file copy action.

rlCopyEntry row .1.3.6.1.4.1.171.10.94.89.89.87.2.1

An entry (conceptual row) in the CopyTable.

Indexes

rlCopyIndex

Column	Syntax	OID
rlCopyIndex The row index in the table.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.171.10.94.89.89.87.2.1.1
rlCopyApplicationId The applicatione activated this comand	RlCopyApplicationType Type Values: 1 mcli 2 cli 3 ewb 4 nms 5 initerm 6 serial	.1.3.6.1.4.1.171.10.94.89.89.87.2.1.2
rlCopySourceLocation Source File Location	RlCopyLocationTyper/w Type Values: 1 local 2 anotherUnit 3 tftp 4 xmodem 5 scp 6 serial	.1.3.6.1.4.1.171.10.94.89.89.87.2.1.3
rlCopySourceIpAddress The Ip address of the source remote host	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.171.10.94.89.89.87.2.1.4
rlCopySourceUnitNumber The unit number of the source unit	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.171.10.94.89.89.87.2.1.5
rlCopySourceFileName The name of the source file.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.171.10.94.89.89.87.2.1.6
rlCopySourceFileType The type of the source file.	RlCopyFileTyper/w Type Values: 1 other 2 runningConfig 3 startupConfig 4 backupConfig 5 runningMibConfig 6 startupMibConfig 7 backupMibConfig 8 image 9 boot 10 null 11 logging	.1.3.6.1.4.1.171.10.94.89.89.87.2.1.7
rlCopyDestinationLocation Destination File Location	RlCopyLocationTyper/w Type Values: 1 local 2 anotherUnit 3 tftp 4 xmodem 5 scp 6 serial	.1.3.6.1.4.1.171.10.94.89.89.87.2.1.8
rlCopyDestinationIpAddress The Ip address of the destination remote host	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.171.10.94.89.89.87.2.1.9
rlCopyDestinationUnitNumber The unit number of the destination unit, value 257 means all units	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.171.10.94.89.89.87.2.1.10
rlCopyDestinationFileName The name of the destination file.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.171.10.94.89.89.87.2.1.11
rlCopyDestinationFileType The type of the destination file.	RlCopyFileTyper/w Type Values: 1 other 2 runningConfig 3 startupConfig 4 backupConfig 5 runningMibConfig 6 startupMibConfig 7 backupMibConfig 8 image 9 boot 10 null 11 logging	.1.3.6.1.4.1.171.10.94.89.89.87.2.1.12
rlCopyUpTime The time elapsed since this entry was created.	RFC1155-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.171.10.94.89.89.87.2.1.13
rlCopyOperationState The state of the copy operation.	Enumeration Enumerated Values: 1 uploadInProgress 2 downloadInProgress 3 copyFailed 4 copyTimedout 5 copyFinished	.1.3.6.1.4.1.171.10.94.89.89.87.2.1.14
rlCopyBytesTransferred The number of bytes that were transferred by the copy operation.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.171.10.94.89.89.87.2.1.15
rlCopyInBackground When enabled the copy operation is done in the background.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.171.10.94.89.89.87.2.1.16
rlCopyRowStatus It is used to insert or delete an entry	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.171.10.94.89.89.87.2.1.17
rlCopyHistoryIndex The index of the entry corresponding to this one in the rlCopyHistoryTable (equals rlCopyHistoryHistoryIndex). A value of 0 indicates that no history entry should be kept for this copy operation.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.171.10.94.89.89.87.2.1.18

The (conceptual) table listing only one entry at a time
with parameters needed for configuration
of the file copy action.

rlCopyHistoryEntry row .1.3.6.1.4.1.171.10.94.89.89.87.4.1

An entry (conceptual row) in the rlCopyHistoryTable.

Indexes

rlCopyHistoryHistoryIndex

Column	Syntax	OID
rlCopyHistoryHistoryIndex The row index in the table.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.171.10.94.89.89.87.4.1.1
rlCopyHistoryApplicationId The application that activated this comand	RlCopyApplicationType Type Values: 1 mcli 2 cli 3 ewb 4 nms 5 initerm 6 serial	.1.3.6.1.4.1.171.10.94.89.89.87.4.1.2
rlCopyHistorySourceLocation Source File Location	RlCopyLocationTyper/w Type Values: 1 local 2 anotherUnit 3 tftp 4 xmodem 5 scp 6 serial	.1.3.6.1.4.1.171.10.94.89.89.87.4.1.3
rlCopyHistorySourceIpAddress The IP address of the source remote host	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.171.10.94.89.89.87.4.1.4
rlCopyHistorySourceUnitNumber The unit number of the source unit	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.171.10.94.89.89.87.4.1.5
rlCopyHistorySourceFileName The name of the source file.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.171.10.94.89.89.87.4.1.6
rlCopyHistorySourceFileType The type of the source file.	RlCopyFileTyper/w Type Values: 1 other 2 runningConfig 3 startupConfig 4 backupConfig 5 runningMibConfig 6 startupMibConfig 7 backupMibConfig 8 image 9 boot 10 null 11 logging	.1.3.6.1.4.1.171.10.94.89.89.87.4.1.7
rlCopyHistoryDestinationLocation Destination File Location	RlCopyLocationTyper/w Type Values: 1 local 2 anotherUnit 3 tftp 4 xmodem 5 scp 6 serial	.1.3.6.1.4.1.171.10.94.89.89.87.4.1.8
rlCopyHistoryDestinationIpAddress The IP address of the destination remote host	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.171.10.94.89.89.87.4.1.9
rlCopyHistoryDestinationUnitNumber The unit number of the destination unit	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.171.10.94.89.89.87.4.1.10
rlCopyHistoryDestinationFileName The name of the destination file.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.171.10.94.89.89.87.4.1.11
rlCopyHistoryDestinationFileType The type of the destination file.	RlCopyFileTyper/w Type Values: 1 other 2 runningConfig 3 startupConfig 4 backupConfig 5 runningMibConfig 6 startupMibConfig 7 backupMibConfig 8 image 9 boot 10 null 11 logging	.1.3.6.1.4.1.171.10.94.89.89.87.4.1.12
rlCopyHistoryUpTime The time elapsed since this entry was created.	RFC1155-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.171.10.94.89.89.87.4.1.13
rlCopyHistoryOperationState The state of the copy operation.	Enumeration Enumerated Values: 1 uploadInProgress 2 downloadInProgress 3 copyFailed 4 copyTimedout 5 copyFinished	.1.3.6.1.4.1.171.10.94.89.89.87.4.1.14
rlCopyHistoryBytesTransferred The number of bytes that were transferred by the copy operation.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.171.10.94.89.89.87.4.1.15
rlCopyHistoryInBackground When enabled the copy operation is done in the background.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.171.10.94.89.89.87.4.1.16
rlCopyHistoryRowStatus It is used delete an entry. No other operations are permitted since the history table is populated and updated through the copy table only.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.171.10.94.89.89.87.4.1.17
rlCopyHistoryErrorMessage Error message as a result of failed copy action.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.171.10.94.89.89.87.4.1.18

The table listing the messages issued during a COPY operation.

rlCopyMessagesEntry row .1.3.6.1.4.1.171.10.94.89.89.87.6.1

An entry (conceptual row) in the rlCopyMessagesTable.

Indexes

rlCopyMessagesCopyIndex rlCopyMessagesMessageIndex

Column	Syntax	OID
rlCopyMessagesCopyIndex The index of the copy operation whose messages are displayed.	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.171.10.94.89.89.87.6.1.1
rlCopyMessagesMessageIndex The index of the displayed message.	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.171.10.94.89.89.87.6.1.2
rlCopyMessagesMessageText The text of the message occurred in the copy operation.	OctetString Constraints: range: 0-80	.1.3.6.1.4.1.171.10.94.89.89.87.6.1.3
rlCopyMessagesStatus Only destroy is supported.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.171.10.94.89.89.87.6.1.4

The (conceptual) table listing only one entry at a time
with parameters needed for configuration
of the file copy action.

rlCopyInetEntry row .1.3.6.1.4.1.171.10.94.89.89.87.8.1

An entry (conceptual row) in the CopyTable.

Indexes

rlCopyInetIndex

Column	Syntax	OID
rlCopyInetIndex The row index in the table.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.171.10.94.89.89.87.8.1.1
rlCopyInetApplicationId The applicatione activated this comand	RlCopyApplicationType Type Values: 1 mcli 2 cli 3 ewb 4 nms 5 initerm 6 serial	.1.3.6.1.4.1.171.10.94.89.89.87.8.1.2
rlCopyInetSourceLocation Source File Location	RlCopyLocationTyper/w Type Values: 1 local 2 anotherUnit 3 tftp 4 xmodem 5 scp 6 serial	.1.3.6.1.4.1.171.10.94.89.89.87.8.1.3
rlCopyInetSourceIpAddressType The Inet address type of the source remote host	INET-ADDRESS-MIBInetAddressTyper/w Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.171.10.94.89.89.87.8.1.4
rlCopyInetSourceIpAddress The Inet address of the source remote host	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.171.10.94.89.89.87.8.1.5
rlCopyInetSourceUnitNumber The unit number of the source unit	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.171.10.94.89.89.87.8.1.6
rlCopyInetSourceFileName The name of the source file.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.171.10.94.89.89.87.8.1.7
rlCopyInetSourceFileType The type of the source file.	RlCopyFileTyper/w Type Values: 1 other 2 runningConfig 3 startupConfig 4 backupConfig 5 runningMibConfig 6 startupMibConfig 7 backupMibConfig 8 image 9 boot 10 null 11 logging	.1.3.6.1.4.1.171.10.94.89.89.87.8.1.8
rlCopyInetDestinationLocation Destination File Location	RlCopyLocationTyper/w Type Values: 1 local 2 anotherUnit 3 tftp 4 xmodem 5 scp 6 serial	.1.3.6.1.4.1.171.10.94.89.89.87.8.1.9
rlCopyInetDestinationIpAddressType The Inet address type of the destination remote host	INET-ADDRESS-MIBInetAddressTyper/w Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.171.10.94.89.89.87.8.1.10
rlCopyInetDestinationIpAddress The Inet address of the destination remote host	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.171.10.94.89.89.87.8.1.11
rlCopyInetDestinationUnitNumber The unit number of the destination unit, value 257 means all units	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.171.10.94.89.89.87.8.1.12
rlCopyInetDestinationFileName The name of the destination file.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.171.10.94.89.89.87.8.1.13
rlCopyInetDestinationFileType The type of the destination file.	RlCopyFileTyper/w Type Values: 1 other 2 runningConfig 3 startupConfig 4 backupConfig 5 runningMibConfig 6 startupMibConfig 7 backupMibConfig 8 image 9 boot 10 null 11 logging	.1.3.6.1.4.1.171.10.94.89.89.87.8.1.14
rlCopyInetUpTime The time elapsed since this entry was created.	RFC1155-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.171.10.94.89.89.87.8.1.15
rlCopyInetOperationState The state of the copy operation.	Enumeration Enumerated Values: 1 uploadInProgress 2 downloadInProgress 3 copyFailed 4 copyTimedout 5 copyFinished	.1.3.6.1.4.1.171.10.94.89.89.87.8.1.16
rlCopyInetBytesTransferred The number of bytes that were transferred by the copy operation.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.171.10.94.89.89.87.8.1.17
rlCopyInetInBackground When enabled the copy operation is done in the background.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.171.10.94.89.89.87.8.1.18
rlCopyInetRowStatus It is used to insert or delete an entry	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.171.10.94.89.89.87.8.1.19
rlCopyInetHistoryIndex The index of the entry corresponding to this one in the rlCopyHistoryTable (equals rlCopyHistoryHistoryIndex). A value of 0 indicates that no history entry should be kept for this copy operation.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.171.10.94.89.89.87.8.1.20

The (conceptual) table listing only one entry at a time
with parameters needed for configuration
of the file copy action.

rlCopyHistoryInetEntry row .1.3.6.1.4.1.171.10.94.89.89.87.9.1

An entry (conceptual row) in the rlCopyHistoryTable.

Indexes

rlCopyHistoryInetHistoryIndex

Column	Syntax	OID
rlCopyHistoryInetHistoryIndex The row index in the table.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.171.10.94.89.89.87.9.1.1
rlCopyHistoryInetApplicationId The application that activated this comand	RlCopyApplicationType Type Values: 1 mcli 2 cli 3 ewb 4 nms 5 initerm 6 serial	.1.3.6.1.4.1.171.10.94.89.89.87.9.1.2
rlCopyHistoryInetSourceLocation Source File Location	RlCopyLocationTyper/w Type Values: 1 local 2 anotherUnit 3 tftp 4 xmodem 5 scp 6 serial	.1.3.6.1.4.1.171.10.94.89.89.87.9.1.3
rlCopyHistoryInetSourceIpAddressType The Inet address type of the source remote host	INET-ADDRESS-MIBInetAddressTyper/w Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.171.10.94.89.89.87.9.1.4
rlCopyHistoryInetSourceIpAddress The Inet address of the source remote host	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.171.10.94.89.89.87.9.1.5
rlCopyHistoryInetSourceUnitNumber The unit number of the source unit	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.171.10.94.89.89.87.9.1.6
rlCopyHistoryInetSourceFileName The name of the source file.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.171.10.94.89.89.87.9.1.7
rlCopyHistoryInetSourceFileType The type of the source file.	RlCopyFileTyper/w Type Values: 1 other 2 runningConfig 3 startupConfig 4 backupConfig 5 runningMibConfig 6 startupMibConfig 7 backupMibConfig 8 image 9 boot 10 null 11 logging	.1.3.6.1.4.1.171.10.94.89.89.87.9.1.8
rlCopyHistoryInetDestinationLocation Destination File Location	RlCopyLocationTyper/w Type Values: 1 local 2 anotherUnit 3 tftp 4 xmodem 5 scp 6 serial	.1.3.6.1.4.1.171.10.94.89.89.87.9.1.9
rlCopyHistoryInetDestinationIpAddressType The Inet address type of the destination remote host	INET-ADDRESS-MIBInetAddressTyper/w Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.171.10.94.89.89.87.9.1.10
rlCopyHistoryInetDestinationIpAddress The Inet address of the destination remote host	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.171.10.94.89.89.87.9.1.11
rlCopyHistoryInetDestinationUnitNumber The unit number of the destination unit	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.171.10.94.89.89.87.9.1.12
rlCopyHistoryInetDestinationFileName The name of the destination file.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.171.10.94.89.89.87.9.1.13
rlCopyHistoryInetDestinationFileType The type of the destination file.	RlCopyFileTyper/w Type Values: 1 other 2 runningConfig 3 startupConfig 4 backupConfig 5 runningMibConfig 6 startupMibConfig 7 backupMibConfig 8 image 9 boot 10 null 11 logging	.1.3.6.1.4.1.171.10.94.89.89.87.9.1.14
rlCopyHistoryInetUpTime The time elapsed since this entry was created.	RFC1155-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.171.10.94.89.89.87.9.1.15
rlCopyHistoryInetOperationState The state of the copy operation.	Enumeration Enumerated Values: 1 uploadInProgress 2 downloadInProgress 3 copyFailed 4 copyTimedout 5 copyFinished	.1.3.6.1.4.1.171.10.94.89.89.87.9.1.16
rlCopyHistoryInetBytesTransferred The number of bytes that were transferred by the copy operation.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.171.10.94.89.89.87.9.1.17
rlCopyHistoryInetInBackground When enabled the copy operation is done in the background.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.171.10.94.89.89.87.9.1.18
rlCopyHistoryInetRowStatus It is used delete an entry. No other operations are permitted since the history table is populated and updated through the copy table only.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.171.10.94.89.89.87.9.1.19
rlCopyHistoryInetErrorMessage Error message as a result of failed copy action.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.171.10.94.89.89.87.9.1.20