DKSF-253-6-X-A-X Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
2
Rows
2
Columns
12

npIoTable

table
.1.3.6.1.4.1.25728.8900.1 · 1 row entry · 7 columns
Open in standard view
Uses the netping variant from /opt/observium/mibs/netping.
Command help
Walk npIoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DKSF-253-6-X-A-X' -M '/opt/observium/mibs/netping:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DKSF-253-6-X-A-X::npIoTable' 
Digital Input/output Table
npIoEntry row .1.3.6.1.4.1.25728.8900.1.1
Digital Input/output Table Row
Indexes
Column Syntax OID
npIoLineN
Number of IO line, from 1 to max supported
Integer32
Constraints:
range: 1-4
 .1.3.6.1.4.1.25728.8900.1.1.1
npIoLevelIn
Input level, 0 or 1
Integer32
Constraints:
range: 0-1
 .1.3.6.1.4.1.25728.8900.1.1.2
npIoLevelOut
Output level, 0 or 1.
Write -1 to flip output.
Enumerationr/w
Enumerated Values:
-1flip
0low
1high
 .1.3.6.1.4.1.25728.8900.1.1.3
npIoMemo
IO line memo
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.25728.8900.1.1.6
npIoPulseCounter
Pulse Counter (counts positive fronts)
Write 0 to reset.
SNMPv2-SMICounter32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.25728.8900.1.1.9
npIoSinglePulseDuration
Set duration of single pulse on IO output line,
100ms to 25500ms, min. step is 100ms
Integer32r/w
Constraints:
range: 100-25500
 .1.3.6.1.4.1.25728.8900.1.1.12
npIoSinglePulseStart
Write 1 to start single pulse on IO output.
Output will be inverted for time, specified by npIoSinglePulseDuration
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.25728.8900.1.1.13

npElecTable

table
.1.3.6.1.4.1.25728.9700.1 · 1 row entry · 5 columns
Open in standard view
Uses the netping variant from /opt/observium/mibs/netping.
Command help
Walk npElecTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DKSF-253-6-X-A-X' -M '/opt/observium/mibs/netping:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DKSF-253-6-X-A-X::npElecTable' 
Electricity Meter Table
npElecEntry row .1.3.6.1.4.1.25728.9700.1.1
Electricity Meter Table Table Row
Indexes
Column Syntax OID
npElecIndex
Number of elec.meter, associated with IO line
Integer32
Constraints:
range: 1-4
 .1.3.6.1.4.1.25728.9700.1.1.1
npElecPulsesPerKwh
Pulses on IO line input per 1 kWh of consumed energy
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.25728.9700.1.1.2
npElecPower
Power, Watts, based on pulse rate/interval, 5 minute average
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.25728.9700.1.1.3
npElecEnergy
Energy counter, kWh, based on pulse count
SNMPv2-SMICounter32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.25728.9700.1.1.4
npElecEnergy100
Energy counter, kWh*100, based on pulse count
SNMPv2-SMICounter32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.25728.9700.1.1.5