DIFFSERV-MIB Table View

The data path table contains RowPointers indicating the start of
the functional data path for each interface and traffic direction
in this device. These may merge, or be separated into parallel
data paths.

diffServDataPathEntry row .1.3.6.1.2.1.97.1.1.1.1

An entry in the data path table indicates the start of a single
Differentiated Services Functional Data Path in this device.

These are associated with individual interfaces, logical or
physical, and therefo…

Indexes

IF-MIBifIndex diffServDataPathIfDirection

Column	Syntax	OID
diffServDataPathIfDirection IfDirection specifies whether the reception or transmission path for this interface is in view.	IfDirection Type Values: 1 inbound 2 outbound	.1.3.6.1.2.1.97.1.1.1.1.1
diffServDataPathStart This selects the first Differentiated Services Functional Data Path Element to handle traffic for this data path. This RowPointer should point to an instance of one of: diffServClfrEntry diffServMeterEntry diffSer…	SNMPv2-TCRowPointerr/w Description: Represents a pointer to a conceptual row. The value is the name of the instance of the first accessible columnar object in the conceptual row. For example, ifIndex.3 would point to the 3rd row in the ifTable…	.1.3.6.1.2.1.97.1.1.1.1.2
diffServDataPathStorage The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row.	SNMPv2-TCStorageTyper/w Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.2.1.97.1.1.1.1.3
diffServDataPathStatus The status of this conceptual row. All writable objects in this row may be modified at any time.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.2.1.97.1.1.1.1.4

This table enumerates all the diffserv classifier functional
data path elements of this device.  The actual classification
definitions are defined in diffServClfrElementTable entries
belonging to each classifier.
          
An entry in this table, pointed to by a RowPointer specifying an
instance of diffServClfrStatus, is frequently used as the name
for a set of classifier elements, which all use the index
diffServClfrId. Per the semantics of the classifier element
table, these entries constitute one or more unordered sets of
tests which may be simultaneously applied to a message to
          
classify it.
          
The primary function of this table is to ensure that the value of
diffServClfrId is unique before attempting to use it in creating
a diffServClfrElementEntry. Therefore, the diffServClfrEntry must
be created on the same SET as the diffServClfrElementEntry, or
before the diffServClfrElementEntry is created.

diffServClfrEntry row .1.3.6.1.2.1.97.1.2.2.1

An entry in the classifier table describes a single classifier.
All classifier elements belonging to the same classifier use the
classifier's diffServClfrId as part of their index.

Indexes

diffServClfrId

Column	Syntax	OID
diffServClfrId An index that enumerates the classifier entries. Managers should obtain new values for row creation in this table by reading diffServClfrNextFree.	IndexInteger Type Constraints: range: 1..4294967295	.1.3.6.1.2.1.97.1.2.2.1.1
diffServClfrStorage The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row.	SNMPv2-TCStorageTyper/w Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.2.1.97.1.2.2.1.2
diffServClfrStatus The status of this conceptual row. All writable objects in this row may be modified at any time. Setting this variable to 'destroy' when the MIB contains one or more RowPointers pointing to it results in destruction bei…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.2.1.97.1.2.2.1.3

The classifier element table enumerates the relationship between
classification patterns and subsequent downstream Differentiated
Services Functional Data Path elements.
diffServClfrElementSpecific points to a filter that specifies the
classification parameters. A classifier may use filter tables of
different types together.
          
One example of a filter table defined in this MIB is
diffServMultiFieldClfrTable, for IP Multi-Field Classifiers
(MFCs). Such an entry might identify anything from a single
micro-flow (an identifiable sub-session packet stream directed
from one sending transport to the receiving transport or
transports), or aggregates of those such as the traffic from a
host, traffic for an application, or traffic between two hosts
using an application and a given DSCP. The standard Behavior
Aggregate used in the Differentiated Services Architecture is
encoded as a degenerate case of such an aggregate - the traffic
using a particular DSCP value.
          
Filter tables for other filter types may be defined elsewhere.

diffServClfrElementEntry row .1.3.6.1.2.1.97.1.2.4.1

An entry in the classifier element table describes a single
element of the classifier.

Indexes

diffServClfrId diffServClfrElementId

Column	Syntax	OID
diffServClfrElementId An index that enumerates the Classifier Element entries. Managers obtain new values for row creation in this table by reading diffServClfrElementNextFree.	IndexInteger Type Constraints: range: 1..4294967295	.1.3.6.1.2.1.97.1.2.4.1.1
diffServClfrElementPrecedence The relative order in which classifier elements are applied: higher numbers represent classifier element with higher precedence. Classifier elements with the same order must be unambiguous i.e. they must define non-ove…	Unsigned32r/w Constraints: range: 1-4294967295	.1.3.6.1.2.1.97.1.2.4.1.2
diffServClfrElementNext This attribute provides one branch of the fan-out functionality of a classifier described in the Informal Differentiated Services Model section 4.1. This selects the next Differentiated Services Functiona…	SNMPv2-TCRowPointerr/w Description: Represents a pointer to a conceptual row. The value is the name of the instance of the first accessible columnar object in the conceptual row. For example, ifIndex.3 would point to the 3rd row in the ifTable…	.1.3.6.1.2.1.97.1.2.4.1.3
diffServClfrElementSpecific A pointer to a valid entry in another table, filter table, that describes the applicable classification parameters, e.g. an entry in diffServMultiFieldClfrTable. The value zeroDotZero is interpreted to ma…	SNMPv2-TCRowPointerr/w Description: Represents a pointer to a conceptual row. The value is the name of the instance of the first accessible columnar object in the conceptual row. For example, ifIndex.3 would point to the 3rd row in the ifTable…	.1.3.6.1.2.1.97.1.2.4.1.4
diffServClfrElementStorage The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row.	SNMPv2-TCStorageTyper/w Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.2.1.97.1.2.4.1.5
diffServClfrElementStatus The status of this conceptual row. All writable objects in this row may be modified at any time. Setting this variable to 'destroy' when the MIB contains one or more RowPointers pointing to it results in destruction bei…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.2.1.97.1.2.4.1.6

A table of IP Multi-field Classifier filter entries that a
          
system may use to identify IP traffic.

diffServMultiFieldClfrEntry row .1.3.6.1.2.1.97.1.2.6.1

An IP Multi-field Classifier entry describes a single filter.

Indexes

diffServMultiFieldClfrId

Column	Syntax	OID
diffServMultiFieldClfrId An index that enumerates the MultiField Classifier filter entries. Managers obtain new values for row creation in this table by reading diffServMultiFieldClfrNextFree.	IndexInteger Type Constraints: range: 1..4294967295	.1.3.6.1.2.1.97.1.2.6.1.1
diffServMultiFieldClfrAddrType The type of IP address used by this classifier entry. While other types of addresses are defined in the InetAddressType textual convention, and DNS names, a classifier can only look at packets on the wir…	INET-ADDRESS-MIBInetAddressTyper/w Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.2.1.97.1.2.6.1.2
diffServMultiFieldClfrDstAddr The IP address to match against the packet's destination IP address. This may not be a DNS name, but may be an IPv4 or IPv6 prefix. diffServMultiFieldClfrDstPrefixLength indicates the number of bits that are relevant.	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.2.1.97.1.2.6.1.3
diffServMultiFieldClfrDstPrefixLength The length of the CIDR Prefix carried in diffServMultiFieldClfrDstAddr. In IPv4 addresses, a length of 0 indicates a match of any address; a length of 32 indicates a match of a single host address, and a length between …	bitsINET-ADDRESS-MIBInetAddressPrefixLengthr/w Type Constraints: range: 0..2040	.1.3.6.1.2.1.97.1.2.6.1.4
diffServMultiFieldClfrSrcAddr The IP address to match against the packet's source IP address. This may not be a DNS name, but may be an IPv4 or IPv6 prefix. diffServMultiFieldClfrSrcPrefixLength indicates the number of bits that are relevant.	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.2.1.97.1.2.6.1.5
diffServMultiFieldClfrSrcPrefixLength The length of the CIDR Prefix carried in diffServMultiFieldClfrSrcAddr. In IPv4 addresses, a length of 0 indicates a match of any address; a length of 32 indicates a match of a single host address, and a length between …	bitsINET-ADDRESS-MIBInetAddressPrefixLengthr/w Type Constraints: range: 0..2040	.1.3.6.1.2.1.97.1.2.6.1.6
diffServMultiFieldClfrDscp The value that the DSCP in the packet must have to match this entry. A value of -1 indicates that a specific DSCP value has not been defined and thus all DSCP values are considered a match.	DIFFSERV-DSCP-TCDscpOrAnyr/w Type Constraints: range: -1..63	.1.3.6.1.2.1.97.1.2.6.1.7
diffServMultiFieldClfrFlowId The flow identifier in an IPv6 header.	Unsigned32r/w Constraints: range: 0-1048575	.1.3.6.1.2.1.97.1.2.6.1.8
diffServMultiFieldClfrProtocol The IP protocol to match against the IPv4 protocol number or the IPv6 Next- Header number in the packet. A value of 255 means match all. Note the protocol number of 255 is reserved by IANA, and Next-Header number of 0 …	Unsigned32r/w Constraints: range: 0-255	.1.3.6.1.2.1.97.1.2.6.1.9
diffServMultiFieldClfrDstL4PortMin The minimum value that the layer-4 destination port number in the packet must have in order to match this classifier entry.	INET-ADDRESS-MIBInetPortNumberr/w Type Constraints: range: 0..65535	.1.3.6.1.2.1.97.1.2.6.1.10
diffServMultiFieldClfrDstL4PortMax The maximum value that the layer-4 destination port number in the packet must have in order to match this classifier entry. This value must be equal to or greater than the value specified for this entry in diffServMulti…	INET-ADDRESS-MIBInetPortNumberr/w Type Constraints: range: 0..65535	.1.3.6.1.2.1.97.1.2.6.1.11
diffServMultiFieldClfrSrcL4PortMin The minimum value that the layer-4 source port number in the packet must have in order to match this classifier entry.	INET-ADDRESS-MIBInetPortNumberr/w Type Constraints: range: 0..65535	.1.3.6.1.2.1.97.1.2.6.1.12
diffServMultiFieldClfrSrcL4PortMax The maximum value that the layer-4 source port number in the packet must have in order to match this classifier entry. This value must be equal to or greater than the value specified for this entry in diffServMultiField…	INET-ADDRESS-MIBInetPortNumberr/w Type Constraints: range: 0..65535	.1.3.6.1.2.1.97.1.2.6.1.13
diffServMultiFieldClfrStorage The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row.	SNMPv2-TCStorageTyper/w Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.2.1.97.1.2.6.1.14
diffServMultiFieldClfrStatus The status of this conceptual row. All writable objects in this row may be modified at any time. Setting this variable to 'destroy' when the MIB contains one or more RowPointers pointing to it results in destruction bei…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.2.1.97.1.2.6.1.15

This table enumerates specific meters that a system may use to
police a stream of traffic. The traffic stream to be metered is
determined by the Differentiated Services Functional Data Path
Element(s) upstream of the meter i.e. by the object(s) that point
to each entry in this table.  This may include all traffic on an
interface.
          
Specific meter details are to be found in table entry referenced
by diffServMeterSpecific.

diffServMeterEntry row .1.3.6.1.2.1.97.1.3.2.1

An entry in the meter table describes a single conformance level
of a meter.

Indexes

diffServMeterId

Column	Syntax	OID
diffServMeterId An index that enumerates the Meter entries. Managers obtain new values for row creation in this table by reading diffServMeterNextFree.	IndexInteger Type Constraints: range: 1..4294967295	.1.3.6.1.2.1.97.1.3.2.1.1
diffServMeterSucceedNext If the traffic does conform, this selects the next Differentiated Services Functional Data Path element to handle traffic for this data path. This RowPointer should point to an instance of one of: diffServClfrEntry …	SNMPv2-TCRowPointerr/w Description: Represents a pointer to a conceptual row. The value is the name of the instance of the first accessible columnar object in the conceptual row. For example, ifIndex.3 would point to the 3rd row in the ifTable…	.1.3.6.1.2.1.97.1.3.2.1.2
diffServMeterFailNext If the traffic does not conform, this selects the next Differentiated Services Functional Data Path element to handle traffic for this data path. This RowPointer should point to an instance of one of: diffServClfrEntr…	SNMPv2-TCRowPointerr/w Description: Represents a pointer to a conceptual row. The value is the name of the instance of the first accessible columnar object in the conceptual row. For example, ifIndex.3 would point to the 3rd row in the ifTable…	.1.3.6.1.2.1.97.1.3.2.1.3
diffServMeterSpecific This indicates the behavior of the meter by pointing to an entry containing detailed parameters. Note that entries in that specific table must be managed explicitly. For example, diffServMeterSpecific may…	SNMPv2-TCRowPointerr/w Description: Represents a pointer to a conceptual row. The value is the name of the instance of the first accessible columnar object in the conceptual row. For example, ifIndex.3 would point to the 3rd row in the ifTable…	.1.3.6.1.2.1.97.1.3.2.1.4
diffServMeterStorage The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row.	SNMPv2-TCStorageTyper/w Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.2.1.97.1.3.2.1.5
diffServMeterStatus The status of this conceptual row. All writable objects in this row may be modified at any time. Setting this variable to 'destroy' when the MIB contains one or more RowPointers pointing to it results in destruction bei…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.2.1.97.1.3.2.1.6

This table enumerates a single set of token bucket meter
parameters that a system may use to police a stream of traffic.
Such meters are modeled here as having a single rate and a single
burst size. Multiple entries are used when multiple rates/burst
sizes are needed.

diffServTBParamEntry row .1.3.6.1.2.1.97.1.4.2.1

An entry that describes a single set of token bucket
parameters.

Indexes

diffServTBParamId

Column	Syntax	OID
diffServTBParamId An index that enumerates the Token Bucket Parameter entries. Managers obtain new values for row creation in this table by reading diffServTBParamNextFree.	IndexInteger Type Constraints: range: 1..4294967295	.1.3.6.1.2.1.97.1.4.2.1.1
diffServTBParamType The Metering algorithm associated with the Token Bucket parameters. zeroDotZero indicates this is unknown. Standard values for generic algorithms: diffServTBParamSimpleTokenBucket, diffServTBParamAvgRate…	SNMPv2-TCAutonomousTyper/w Description: Represents an independently extensible type identification value. It may, for example, indicate a particular sub-tree with further MIB definitions, or define a particular type of protocol or hardware.	.1.3.6.1.2.1.97.1.4.2.1.2
diffServTBParamRate The token-bucket rate, in kilobits per second (kbps). This attribute is used for: 1. CIR in RFC 2697 for srTCM 2. CIR and PIR in RFC 2698 for trTCM 3. CTR and PTR in RFC 2859 for TSWTCM 4. AverageRate in RFC 3290.	kilobits per secondUnsigned32r/w Constraints: range: 1-4294967295	.1.3.6.1.2.1.97.1.4.2.1.3
diffServTBParamBurstSize The maximum number of bytes in a single transmission burst. This attribute is used for: 1. CBS and EBS in RFC 2697 for srTCM 2. CBS and PBS in RFC 2698 for trTCM 3. Burst Size in RFC 3290.	BytesINTEGRATED-SERVICES-MIBBurstSizer/w Type Constraints: range: 0..2147483647	.1.3.6.1.2.1.97.1.4.2.1.4
diffServTBParamInterval The time interval used with the token bucket. For: 1. Average Rate Meter, the Informal Differentiated Services Model section 5.2.1, - Delta. 2. Simple Token Bucket Meter, the Informal Differentiated Services Mode…	microsecondsUnsigned32r/w Constraints: range: 1-4294967295	.1.3.6.1.2.1.97.1.4.2.1.5
diffServTBParamStorage The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row.	SNMPv2-TCStorageTyper/w Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.2.1.97.1.4.2.1.6
diffServTBParamStatus The status of this conceptual row. All writable objects in this row may be modified at any time. Setting this variable to 'destroy' when the MIB contains one or more RowPointers pointing to it results in destruction bei…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.2.1.97.1.4.2.1.7

The Action Table enumerates actions that can be performed to a
stream of traffic. Multiple actions can be concatenated. For
example, traffic exiting from a meter may be counted, marked, and
potentially dropped before entering a queue.
          
Specific actions are indicated by diffServActionSpecific which
points to an entry of a specific action type parameterizing the
action in detail.

diffServActionEntry row .1.3.6.1.2.1.97.1.5.2.1

Each entry in the action table allows description of one
specific action to be applied to traffic.

Indexes

diffServActionId

Column	Syntax	OID
diffServActionId An index that enumerates the Action entries. Managers obtain new values for row creation in this table by reading diffServActionNextFree.	IndexInteger Type Constraints: range: 1..4294967295	.1.3.6.1.2.1.97.1.5.2.1.1
diffServActionInterface The interface index (value of ifIndex) that this action occurs on. This may be derived from the diffServDataPathStartEntry's index by extension through the various RowPointers. However, as this may be difficult for a ne…	IF-MIBInterfaceIndexOrZeror/w Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.2.1.97.1.5.2.1.2
diffServActionNext This selects the next Differentiated Services Functional Data Path Element to handle traffic for this data path. This RowPointer should point to an instance of one of: diffServClfrEntry diffServMeterEntry diffServ…	SNMPv2-TCRowPointerr/w Description: Represents a pointer to a conceptual row. The value is the name of the instance of the first accessible columnar object in the conceptual row. For example, ifIndex.3 would point to the 3rd row in the ifTable…	.1.3.6.1.2.1.97.1.5.2.1.3
diffServActionSpecific A pointer to an object instance providing additional information for the type of action indicated by this action table entry. For the standard actions defined by this MIB module, this should point to eith…	SNMPv2-TCRowPointerr/w Description: Represents a pointer to a conceptual row. The value is the name of the instance of the first accessible columnar object in the conceptual row. For example, ifIndex.3 would point to the 3rd row in the ifTable…	.1.3.6.1.2.1.97.1.5.2.1.4
diffServActionStorage The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row.	SNMPv2-TCStorageTyper/w Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.2.1.97.1.5.2.1.5
diffServActionStatus The status of this conceptual row. All writable objects in this row may be modified at any time. Setting this variable to 'destroy' when the MIB contains one or more RowPointers pointing to it results in destruction bei…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.2.1.97.1.5.2.1.6

This table enumerates specific DSCPs used for marking or
remarking the DSCP field of IP packets. The entries of this table
may be referenced by a diffServActionSpecific attribute.

diffServDscpMarkActEntry row .1.3.6.1.2.1.97.1.5.3.1

An entry in the DSCP mark action table that describes a single
DSCP used for marking.

Indexes

diffServDscpMarkActDscp

Column	Syntax	OID
diffServDscpMarkActDscp The DSCP that this Action will store into the DSCP field of the subject. It is quite possible that the only packets subject to this Action are already marked with this DSCP. Note also that Differentiated Services proces…	DIFFSERV-DSCP-TCDscp Type Constraints: range: 0..63	.1.3.6.1.2.1.97.1.5.3.1.1

This table contains counters for all the traffic passing through
an action element.

diffServCountActEntry row .1.3.6.1.2.1.97.1.5.5.1

An entry in the count action table describes a single set of
traffic counters.

Indexes

diffServCountActId

Column	Syntax	OID
diffServCountActId An index that enumerates the Count Action entries. Managers obtain new values for row creation in this table by reading diffServCountActNextFree.	IndexInteger Type Constraints: range: 1..4294967295	.1.3.6.1.2.1.97.1.5.5.1.1
diffServCountActOctets The number of octets at the Action data path element. Discontinuities in the value of this counter can occur at re- initialization of the management system and at other times as indicated by the value of …	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.2.1.97.1.5.5.1.2
diffServCountActPkts The number of packets at the Action data path element. Discontinuities in the value of this counter can occur at re- initialization of the management system and at other times as indicated by the value of…	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.2.1.97.1.5.5.1.3
diffServCountActStorage The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row.	SNMPv2-TCStorageTyper/w Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.2.1.97.1.5.5.1.4
diffServCountActStatus The status of this conceptual row. All writable objects in this row may be modified at any time. Setting this variable to 'destroy' when the MIB contains one or more RowPointers pointing to it results in …	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.2.1.97.1.5.5.1.5

The algorithmic drop table contains entries describing an
element that drops packets according to some algorithm.

diffServAlgDropEntry row .1.3.6.1.2.1.97.1.6.2.1

An entry describes a process that drops packets according to
some algorithm. Further details of the algorithm type are to be
found in diffServAlgDropType and with more detail parameter entry
pointed to by diffServAlgDro…

Indexes

diffServAlgDropId

Column	Syntax	OID
diffServAlgDropId An index that enumerates the Algorithmic Dropper entries. Managers obtain new values for row creation in this table by reading diffServAlgDropNextFree.	IndexInteger Type Constraints: range: 1..4294967295	.1.3.6.1.2.1.97.1.6.2.1.1
diffServAlgDropType The type of algorithm used by this dropper. The value other(1) requires further specification in some other MIB module. In the tailDrop(2) algorithm, diffServAlgDropQThreshold represents the maximum depth…	Enumerationr/w Enumerated Values: 1 other 2 tailDrop 3 headDrop 4 randomDrop 5 alwaysDrop	.1.3.6.1.2.1.97.1.6.2.1.2
diffServAlgDropNext This selects the next Differentiated Services Functional Data Path Element to handle traffic for this data path. This RowPointer should point to an instance of one of: diffServClfrEntry diffServMeterEntry diffServ…	SNMPv2-TCRowPointerr/w Description: Represents a pointer to a conceptual row. The value is the name of the instance of the first accessible columnar object in the conceptual row. For example, ifIndex.3 would point to the 3rd row in the ifTable…	.1.3.6.1.2.1.97.1.6.2.1.3
diffServAlgDropQMeasure Points to an entry in the diffServQTable to indicate the queue that a drop algorithm is to monitor when deciding whether to drop a packet. If the row pointed to does not exist, the algorithmic dropper element is conside…	SNMPv2-TCRowPointerr/w Description: Represents a pointer to a conceptual row. The value is the name of the instance of the first accessible columnar object in the conceptual row. For example, ifIndex.3 would point to the 3rd row in the ifTable…	.1.3.6.1.2.1.97.1.6.2.1.4
diffServAlgDropQThreshold A threshold on the depth in bytes of the queue being measured at which a trigger is generated to the dropping algorithm, unless diffServAlgDropType is alwaysDrop(5) where this object is ignored. For the t…	BytesUnsigned32r/w Constraints: range: 1-4294967295	.1.3.6.1.2.1.97.1.6.2.1.5
diffServAlgDropSpecific Points to a table entry that provides further detail regarding a drop algorithm. Entries with diffServAlgDropType equal to other(1) may have this point to a table defined in another MIB module. …	SNMPv2-TCRowPointerr/w Description: Represents a pointer to a conceptual row. The value is the name of the instance of the first accessible columnar object in the conceptual row. For example, ifIndex.3 would point to the 3rd row in the ifTable…	.1.3.6.1.2.1.97.1.6.2.1.6
diffServAlgDropOctets The number of octets that have been deterministically dropped by this drop process. Discontinuities in the value of this counter can occur at re- initialization of the management system and at other times…	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.2.1.97.1.6.2.1.7
diffServAlgDropPkts The number of packets that have been deterministically dropped by this drop process. Discontinuities in the value of this counter can occur at re- initialization of the management system and at other time…	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.2.1.97.1.6.2.1.8
diffServAlgRandomDropOctets The number of octets that have been randomly dropped by this drop process. This counter applies, therefore, only to random droppers. Discontinuities in the value of this counter can occur at re- initiali…	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.2.1.97.1.6.2.1.9
diffServAlgRandomDropPkts The number of packets that have been randomly dropped by this drop process. This counter applies, therefore, only to random droppers. Discontinuities in the value of this counter can occur at re- initiali…	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.2.1.97.1.6.2.1.10
diffServAlgDropStorage The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row.	SNMPv2-TCStorageTyper/w Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.2.1.97.1.6.2.1.11
diffServAlgDropStatus The status of this conceptual row. All writable objects in this row may be modified at any time. Setting this variable to 'destroy' when the MIB contains one or more RowPointers pointing to it results in destruction bei…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.2.1.97.1.6.2.1.12

The random drop table contains entries describing a process that
drops packets randomly. Entries in this table are pointed to by
diffServAlgDropSpecific.

diffServRandomDropEntry row .1.3.6.1.2.1.97.1.6.4.1

An entry describes a process that drops packets according to a
random algorithm.

Indexes

diffServRandomDropId

Column	Syntax	OID
diffServRandomDropId An index that enumerates the Random Drop entries. Managers obtain new values for row creation in this table by reading diffServRandomDropNextFree.	IndexInteger Type Constraints: range: 1..4294967295	.1.3.6.1.2.1.97.1.6.4.1.1
diffServRandomDropMinThreshBytes The average queue depth in bytes, beyond which traffic has a non-zero probability of being dropped. Changes in this variable may or may not be reflected in the reported value of diffServRandomDropMinThreshPkts.	bytesUnsigned32r/w Constraints: range: 1-4294967295	.1.3.6.1.2.1.97.1.6.4.1.2
diffServRandomDropMinThreshPkts The average queue depth in packets, beyond which traffic has a non-zero probability of being dropped. Changes in this variable may or may not be reflected in the reported value of diffServRandomDropMinThreshBytes.	packetsUnsigned32r/w Constraints: range: 1-4294967295	.1.3.6.1.2.1.97.1.6.4.1.3
diffServRandomDropMaxThreshBytes The average queue depth beyond which traffic has a probability indicated by diffServRandomDropProbMax of being dropped or marked. Note that this differs from the physical queue limit, which is stored in diffServAlgDropQ…	bytesUnsigned32r/w Constraints: range: 1-4294967295	.1.3.6.1.2.1.97.1.6.4.1.4
diffServRandomDropMaxThreshPkts The average queue depth beyond which traffic has a probability indicated by diffServRandomDropProbMax of being dropped or marked. Note that this differs from the physical queue limit, which is stored in diffServAlgDropQ…	packetsUnsigned32r/w Constraints: range: 1-4294967295	.1.3.6.1.2.1.97.1.6.4.1.5
diffServRandomDropProbMax The worst case random drop probability, expressed in drops per thousand packets. For example, if in the worst case every arriving packet may be dropped (100%) for a period, this has the value 1000. Altern…	Unsigned32r/w Constraints: range: 0-1000	.1.3.6.1.2.1.97.1.6.4.1.6
diffServRandomDropWeight The weighting of past history in affecting the Exponentially Weighted Moving Average function that calculates the current average queue depth. The equation uses diffServRandomDropWeight/65536 as the coefficient for the…	Unsigned32r/w Constraints: range: 0-65536	.1.3.6.1.2.1.97.1.6.4.1.7
diffServRandomDropSamplingRate The number of times per second the queue is sampled for queue average calculation. A value of zero is used to mean that the queue is sampled approximately each time a packet is enqueued (or dequeued).	Unsigned32r/w Constraints: range: 0-1000000	.1.3.6.1.2.1.97.1.6.4.1.8
diffServRandomDropStorage The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row.	SNMPv2-TCStorageTyper/w Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.2.1.97.1.6.4.1.9
diffServRandomDropStatus The status of this conceptual row. All writable objects in this row may be modified at any time. Setting this variable to 'destroy' when the MIB contains one or more RowPointers pointing to it results in destruction bei…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.2.1.97.1.6.4.1.10

The Queue Table enumerates the individual queues.  Note that the
MIB models queuing systems as composed of individual queues, one
per class of traffic, even though they may in fact be structured
as classes of traffic scheduled using a common calendar queue, or
in other ways.

diffServQEntry row .1.3.6.1.2.1.97.1.7.2.1

An entry in the Queue Table describes a single queue or class of
traffic.

Indexes

diffServQId

Column	Syntax	OID
diffServQId An index that enumerates the Queue entries. Managers obtain new values for row creation in this table by reading diffServQNextFree.	IndexInteger Type Constraints: range: 1..4294967295	.1.3.6.1.2.1.97.1.7.2.1.1
diffServQNext This selects the next Differentiated Services Scheduler. The RowPointer must point to a diffServSchedulerEntry. A value of zeroDotZero in this attribute indicates an incomplete diffServQEntry instance. I…	SNMPv2-TCRowPointerr/w Description: Represents a pointer to a conceptual row. The value is the name of the instance of the first accessible columnar object in the conceptual row. For example, ifIndex.3 would point to the 3rd row in the ifTable…	.1.3.6.1.2.1.97.1.7.2.1.2
diffServQMinRate This RowPointer indicates the diffServMinRateEntry that the scheduler, pointed to by diffServQNext, should use to service this queue. If the row pointed to is zeroDotZero, the minimum rate and priority is…	SNMPv2-TCRowPointerr/w Description: Represents a pointer to a conceptual row. The value is the name of the instance of the first accessible columnar object in the conceptual row. For example, ifIndex.3 would point to the 3rd row in the ifTable…	.1.3.6.1.2.1.97.1.7.2.1.3
diffServQMaxRate This RowPointer indicates the diffServMaxRateEntry that the scheduler, pointed to by diffServQNext, should use to service this queue. If the row pointed to is zeroDotZero, the maximum rate is the line spe…	SNMPv2-TCRowPointerr/w Description: Represents a pointer to a conceptual row. The value is the name of the instance of the first accessible columnar object in the conceptual row. For example, ifIndex.3 would point to the 3rd row in the ifTable…	.1.3.6.1.2.1.97.1.7.2.1.4
diffServQStorage The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row.	SNMPv2-TCStorageTyper/w Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.2.1.97.1.7.2.1.5
diffServQStatus The status of this conceptual row. All writable objects in this row may be modified at any time. Setting this variable to 'destroy' when the MIB contains one or more RowPointers pointing to it results in destruction bei…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.2.1.97.1.7.2.1.6

The Scheduler Table enumerates packet schedulers. Multiple
scheduling algorithms can be used on a given data path, with each
algorithm described by one diffServSchedulerEntry.

diffServSchedulerEntry row .1.3.6.1.2.1.97.1.8.2.1

An entry in the Scheduler Table describing a single instance of
a scheduling algorithm.

Indexes

diffServSchedulerId

Column	Syntax	OID
diffServSchedulerId An index that enumerates the Scheduler entries. Managers obtain new values for row creation in this table by reading diffServSchedulerNextFree.	IndexInteger Type Constraints: range: 1..4294967295	.1.3.6.1.2.1.97.1.8.2.1.1
diffServSchedulerNext This selects the next Differentiated Services Functional Data Path Element to handle traffic for this data path. This normally is null (zeroDotZero), or points to a diffServSchedulerEntry or a diffServQEntry. …	SNMPv2-TCRowPointerr/w Description: Represents a pointer to a conceptual row. The value is the name of the instance of the first accessible columnar object in the conceptual row. For example, ifIndex.3 would point to the 3rd row in the ifTable…	.1.3.6.1.2.1.97.1.8.2.1.2
diffServSchedulerMethod The scheduling algorithm used by this Scheduler. zeroDotZero indicates that this is unknown. Standard values for generic algorithms: diffServSchedulerPriority, diffServSchedulerWRR, and diffServSchedulerWFQ are specifi…	SNMPv2-TCAutonomousTyper/w Description: Represents an independently extensible type identification value. It may, for example, indicate a particular sub-tree with further MIB definitions, or define a particular type of protocol or hardware.	.1.3.6.1.2.1.97.1.8.2.1.3
diffServSchedulerMinRate This RowPointer indicates the entry in diffServMinRateTable which indicates the priority or minimum output rate from this scheduler. This attribute is used only when there is more than one level of scheduler. …	SNMPv2-TCRowPointerr/w Description: Represents a pointer to a conceptual row. The value is the name of the instance of the first accessible columnar object in the conceptual row. For example, ifIndex.3 would point to the 3rd row in the ifTable…	.1.3.6.1.2.1.97.1.8.2.1.4
diffServSchedulerMaxRate This RowPointer indicates the entry in diffServMaxRateTable which indicates the maximum output rate from this scheduler. When more than one maximum rate applies (eg, when a multi-rate shaper is in view), it points to th…	SNMPv2-TCRowPointerr/w Description: Represents a pointer to a conceptual row. The value is the name of the instance of the first accessible columnar object in the conceptual row. For example, ifIndex.3 would point to the 3rd row in the ifTable…	.1.3.6.1.2.1.97.1.8.2.1.5
diffServSchedulerStorage The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row.	SNMPv2-TCStorageTyper/w Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.2.1.97.1.8.2.1.6
diffServSchedulerStatus The status of this conceptual row. All writable objects in this row may be modified at any time. Setting this variable to 'destroy' when the MIB contains one or more RowPointers pointing to it results in destruction bei…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.2.1.97.1.8.2.1.7

The Minimum Rate Parameters Table enumerates individual sets of
scheduling parameter that can be used/reused by Queues and
Schedulers.

diffServMinRateEntry row .1.3.6.1.2.1.97.1.8.4.1

An entry in the Minimum Rate Parameters Table describes a single
set of scheduling parameters for use by one or more queues or
schedulers.

Indexes

diffServMinRateId

Column	Syntax	OID
diffServMinRateId An index that enumerates the Scheduler Parameter entries. Managers obtain new values for row creation in this table by reading diffServMinRateNextFree.	IndexInteger Type Constraints: range: 1..4294967295	.1.3.6.1.2.1.97.1.8.4.1.1
diffServMinRatePriority The priority of this input to the associated scheduler, relative to the scheduler's other inputs. A queue or scheduler with a larger numeric value will be served before another with a smaller numeric valu…	Unsigned32r/w Constraints: range: 1-4294967295	.1.3.6.1.2.1.97.1.8.4.1.2
diffServMinRateAbsolute The minimum absolute rate, in kilobits/sec, that a downstream scheduler element should allocate to this queue. If the value is zero, then there is effectively no minimum rate guarantee. If the value is non-zero, the sch…	kilobits per secondUnsigned32r/w Constraints: range: 1-4294967295	.1.3.6.1.2.1.97.1.8.4.1.3
diffServMinRateRelative The minimum rate that a downstream scheduler element should allocate to this queue, relative to the maximum rate of the interface as reported by ifSpeed or ifHighSpeed, in units of 1/1000 of 1. If the value is zero, the…	Unsigned32r/w Constraints: range: 1-4294967295	.1.3.6.1.2.1.97.1.8.4.1.4
diffServMinRateStorage The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row.	SNMPv2-TCStorageTyper/w Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.2.1.97.1.8.4.1.5
diffServMinRateStatus The status of this conceptual row. All writable objects in this row may be modified at any time. Setting this variable to 'destroy' when the MIB contains one or more RowPointers pointing to it results in destruction bei…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.2.1.97.1.8.4.1.6

The Maximum Rate Parameter Table enumerates individual sets of
scheduling parameter that can be used/reused by Queues and
Schedulers.

diffServMaxRateEntry row .1.3.6.1.2.1.97.1.8.6.1

An entry in the Maximum Rate Parameter Table describes a single
set of scheduling parameters for use by one or more queues or
schedulers.

Indexes

diffServMaxRateId diffServMaxRateLevel

Column	Syntax	OID
diffServMaxRateId An index that enumerates the Maximum Rate Parameter entries. Managers obtain new values for row creation in this table by reading diffServMaxRateNextFree.	IndexInteger Type Constraints: range: 1..4294967295	.1.3.6.1.2.1.97.1.8.6.1.1
diffServMaxRateLevel An index that indicates which level of a multi-rate shaper is being given its parameters. A multi-rate shaper has some number of rate levels. Frame Relay's dual rate specification refers to a 'committed' and an 'excess'…	Unsigned32 Constraints: range: 1-32	.1.3.6.1.2.1.97.1.8.6.1.2
diffServMaxRateAbsolute The maximum rate in kilobits/sec that a downstream scheduler element should allocate to this queue. If the value is zero, then there is effectively no maximum rate limit and that the scheduler should attempt to be work …	kilobits per secondUnsigned32r/w Constraints: range: 1-4294967295	.1.3.6.1.2.1.97.1.8.6.1.3
diffServMaxRateRelative The maximum rate that a downstream scheduler element should allocate to this queue, relative to the maximum rate of the interface as reported by ifSpeed or ifHighSpeed, in units of 1/1000 of 1. If the value is zero, the…	Unsigned32r/w Constraints: range: 1-4294967295	.1.3.6.1.2.1.97.1.8.6.1.4
diffServMaxRateThreshold The number of bytes of queue depth at which the rate of a multi-rate scheduler will increase to the next output rate. In the last conceptual row for such a shaper, this threshold is ignored and by convent…	BytesINTEGRATED-SERVICES-MIBBurstSizer/w Type Constraints: range: 0..2147483647	.1.3.6.1.2.1.97.1.8.6.1.5
diffServMaxRateStorage The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row.	SNMPv2-TCStorageTyper/w Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.2.1.97.1.8.6.1.6
diffServMaxRateStatus The status of this conceptual row. All writable objects in this row may be modified at any time. Setting this variable to 'destroy' when the MIB contains one or more RowPointers pointing to it results in destruction bei…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.2.1.97.1.8.6.1.7