DHCP-OPTION-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
5
Rows
5
Columns
24

rcDhcpOption82PortTable

table
.1.3.6.1.4.1.8886.6.1.41.1.1.1 · 1 row entry · 2 columns
Open in standard view
Uses the raisecom variant from /opt/observium/mibs/raisecom.
Command help
Walk rcDhcpOption82PortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DHCP-OPTION-MIB' -M '/opt/observium/mibs/raisecom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DHCP-OPTION-MIB::rcDhcpOption82PortTable' 
A table keep record of circuit ID for every port.
rcDhcpOption82PortEntry row .1.3.6.1.4.1.8886.6.1.41.1.1.1.1
Table entry for switch dhcp option config based on port.
Indexes
Column Syntax OID
rcDhcpOption82PortIndex
An index that uniquely identifies a configuration about dhcp option
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8886.6.1.41.1.1.1.1.1
rcDhcpOption82CircuitID
string of circuit-ID in which you can fill anything you want.
The maximum length is 64 bytes.If it not configged,it is zero.
if it configged,the OPTION82 will use it as circuit-id.
OctetStringr/w
Constraints:
range: 1-64
 .1.3.6.1.4.1.8886.6.1.41.1.1.1.1.2

rcDhcpOptionGlobalTable

table
.1.3.6.1.4.1.8886.6.1.41.1.3.1 · 1 row entry · 5 columns
Open in standard view
Uses the raisecom variant from /opt/observium/mibs/raisecom.
Command help
Walk rcDhcpOptionGlobalTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DHCP-OPTION-MIB' -M '/opt/observium/mibs/raisecom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DHCP-OPTION-MIB::rcDhcpOptionGlobalTable' 
A table keep record of option content for every port.
rcDhcpOptionGlobalEntry row .1.3.6.1.4.1.8886.6.1.41.1.3.1.1
Table entry for switch dhcp option config based on option code.
Indexes
Column Syntax OID
rcDhcpOptionCode
An index that uniquely identifies a configuration about dhcp option
OctetString .1.3.6.1.4.1.8886.6.1.41.1.3.1.1.1
rcDhcpOptionContent
string of option content in which you can fill anything you want.
The maximum length is 32 bytes. If it not configged,it is zero.
OctetStringr/w .1.3.6.1.4.1.8886.6.1.41.1.3.1.1.2
rcDhcpOptionLength
length of the option content which is configged.
OctetStringr/w .1.3.6.1.4.1.8886.6.1.41.1.3.1.1.3
rcDhcpOptionType
type of the option content which is configged.
Enumerationr/w
Enumerated Values:
1asciiString
2hexString
3ipAddress
 .1.3.6.1.4.1.8886.6.1.41.1.3.1.1.4
rcDhcpOptionRowStatus
control the ipv4 global option config table.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.8886.6.1.41.1.3.1.1.5

rcDhcp6OptionGlobalTable

table
.1.3.6.1.4.1.8886.6.1.41.1.3.2 · 1 row entry · 5 columns
Open in standard view
Uses the raisecom variant from /opt/observium/mibs/raisecom.
Command help
Walk rcDhcp6OptionGlobalTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DHCP-OPTION-MIB' -M '/opt/observium/mibs/raisecom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DHCP-OPTION-MIB::rcDhcp6OptionGlobalTable' 
A table keep record of global option content for every option code.
rcDhcp6OptionGlobalEntry row .1.3.6.1.4.1.8886.6.1.41.1.3.2.1
Table entry for switch dhcp option config based on option code.
Indexes
Column Syntax OID
rcDhcp6OptionCode
An index that uniquely identifies a configuration about dhcp option
OctetString .1.3.6.1.4.1.8886.6.1.41.1.3.2.1.1
rcDhcp6OptionContent
string of option content in which you can fill anything you want.
The maximum length is 32 bytes.If it not configged,it is zero.
OctetStringr/w .1.3.6.1.4.1.8886.6.1.41.1.3.2.1.2
rcDhcp6OptionLength
length of the option content which is configged.
OctetStringr/w .1.3.6.1.4.1.8886.6.1.41.1.3.2.1.3
rcDhcp6OptionType
type of the option content which is configged.
Enumerationr/w
Enumerated Values:
1asciiString
2hexString
3ipAddress
 .1.3.6.1.4.1.8886.6.1.41.1.3.2.1.4
rcDhcp6OptionRowStatus
control the ipv6 global option config table.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.8886.6.1.41.1.3.2.1.5

rcDhcpOptionPortTable

table
.1.3.6.1.4.1.8886.6.1.41.1.4.1 · 1 row entry · 6 columns
Open in standard view
Uses the raisecom variant from /opt/observium/mibs/raisecom.
Command help
Walk rcDhcpOptionPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DHCP-OPTION-MIB' -M '/opt/observium/mibs/raisecom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DHCP-OPTION-MIB::rcDhcpOptionPortTable' 
A table keep record of option content for every port and option code
rcDhcpOptionPortEntry row .1.3.6.1.4.1.8886.6.1.41.1.4.1.1
Table entry for switch dhcp option config based on port and option code
Indexes
Column Syntax OID
rcDhcpOptionPortIndex
An index that uniquely identifies a configuration about dhcp option
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8886.6.1.41.1.4.1.1.1
rcDhcpOptionPortCode
An index that uniquely identifies a configuration about dhcp option
OctetString .1.3.6.1.4.1.8886.6.1.41.1.4.1.1.2
rcDhcpOptionPortContent
string of option content in which you can fill anything you want.
The maximum length is 32 bytes.If it not configged,it is zero.
OctetStringr/w .1.3.6.1.4.1.8886.6.1.41.1.4.1.1.3
rcDhcpOptionPortLength
length of the option content which is configged.
OctetStringr/w .1.3.6.1.4.1.8886.6.1.41.1.4.1.1.4
rcDhcpOptionPortType
type of the option content which is configged.
Enumerationr/w
Enumerated Values:
1asciiString
2hexString
3ipAddress
 .1.3.6.1.4.1.8886.6.1.41.1.4.1.1.5
rcDhcpOptionPortRowStatus
control the ipv4 port option config table.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.8886.6.1.41.1.4.1.1.6

rcDhcp6OptionPortTable

table
.1.3.6.1.4.1.8886.6.1.41.1.4.2 · 1 row entry · 6 columns
Open in standard view
Uses the raisecom variant from /opt/observium/mibs/raisecom.
Command help
Walk rcDhcp6OptionPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DHCP-OPTION-MIB' -M '/opt/observium/mibs/raisecom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DHCP-OPTION-MIB::rcDhcp6OptionPortTable' 
A table keep record of option content for every port and option code
rcDhcp6OptionPortEntry row .1.3.6.1.4.1.8886.6.1.41.1.4.2.1
Table entry for switch dhcp option config based on port and option code
Indexes
Column Syntax OID
rcDhcp6OptionPortIndex
An index that uniquely identifies a configuration about dhcp option
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8886.6.1.41.1.4.2.1.1
rcDhcp6OptionPortCode
An index that uniquely identifies a configuration about dhcp option
OctetString .1.3.6.1.4.1.8886.6.1.41.1.4.2.1.2
rcDhcp6OptionPortContent
string of option content in which you can fill anything you want.
The maximum length is 32 bytes.If it not configged,it is zero.
OctetStringr/w .1.3.6.1.4.1.8886.6.1.41.1.4.2.1.3
rcDhcp6OptionPortLength
length of the option content which is configged.
OctetStringr/w .1.3.6.1.4.1.8886.6.1.41.1.4.2.1.4
rcDhcp6OptionPortType
type of the option content which is configged.
Enumerationr/w
Enumerated Values:
1asciiString
2hexString
3ipAddress
 .1.3.6.1.4.1.8886.6.1.41.1.4.2.1.5
rcDhcp6OptionPortRowStatus
control the ipv6 port option config table.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.8886.6.1.41.1.4.2.1.6