DGS3120-24SC-L2MGMT-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
18
Rows
18
Columns
69

swL2DevCtrlCFMPortTable

table
.1.3.6.1.4.1.171.11.117.4.1.2.1.2.21.2 · 1 row entry · 2 columns
Open in standard view 
A table containing the CFM state of specified ports.
swL2DevCtrlCFMPortEntry entry .1.3.6.1.4.1.171.11.117.4.1.2.1.2.21.2.1
The entry of the CFM state on specified ports.
Indexes
swL2DevCtrlCFMPortIndex
Column Syntax OID
swL2DevCtrlCFMPortIndex
This object indicates the port number.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.11.117.4.1.2.1.2.21.2.1.1
swL2DevCtrlCFMPortState
This object indicates the CFM state by port.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.11.117.4.1.2.1.2.21.2.1.2

swL2DevCtrlLLDPExtPortSubTypeTable

table
.1.3.6.1.4.1.171.11.117.4.1.2.1.2.24 · 1 row entry · 1 columns
Open in standard view 
The table is used to configure the subtype of Port ID TLV for ports.
swL2DevCtrlLLDPExtPortSubTypeEntry entry .1.3.6.1.4.1.171.11.117.4.1.2.1.2.24.1
An entry contains the information of subtype of Port ID TLV on a port.
Indexes
swL2PortInfoPortIndex
Column Syntax OID
swL2DevCtrlLLDPExtPortSubType
This object represents how to encode the port ID in Port ID TLV.
localPortNumber - The 'port ID' will be encoded with local port number.
macAddress(2) -The 'port ID' will be encoded with MAC address.
Enumerationr/w
Enumerated Values:
1localPortNumber
2macAddress
 .1.3.6.1.4.1.171.11.117.4.1.2.1.2.24.1.1

swL2VlanStaticTable

table
.1.3.6.1.4.1.171.11.117.4.1.2.2.1 · 1 row entry · 2 columns
Open in standard view 
A table containing static configuration information for
each VLAN configured into the device by (local or
network) management. All entries are permanent and will
be restored after the device is reset.
swL2VlanStaticEntry entry .1.3.6.1.4.1.171.11.117.4.1.2.2.1.1
Static information for a VLAN configured into this
device by (local or network) management.
Indexes
swL2VlanIndex
Column Syntax OID
swL2VlanIndex
The VLAN-ID or other identifier referring to this VLAN.
VlanId
Textual Convention: VlanId Integer32
Type Constraints:
range: 1..4094
 .1.3.6.1.4.1.171.11.117.4.1.2.2.1.1.1
swL2VLANAdvertisement
This object indicates if the advertisement is active or not.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.11.117.4.1.2.2.1.1.2

swL2VlanPortInfoTable

table
.1.3.6.1.4.1.171.11.117.4.1.2.2.3 · 1 row entry · 3 columns
Open in standard view 
A table containing the VLAN and port role information of each port.
swL2VlanPortInfoEntry entry .1.3.6.1.4.1.171.11.117.4.1.2.2.3.1
The table entry of VLAN port information.
Indexes
swL2VlanPortInfoPortIndex swL2VlanPortInfoVid
Column Syntax OID
swL2VlanPortInfoPortIndex
The port index.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.171.11.117.4.1.2.2.3.1.1
swL2VlanPortInfoVid
The VLAN ID assigned to a special port
VlanId
Textual Convention: VlanId Integer32
Type Constraints:
range: 1..4094
 .1.3.6.1.4.1.171.11.117.4.1.2.2.3.1.2
swL2VlanPortInfoPortRole
The port role of a special port. When the role is 'other', it means this port does not belong to the VLAN.
Enumeration
Enumerated Values:
1other
2untagged
3tagged
4dynamic
5forbidden
 .1.3.6.1.4.1.171.11.117.4.1.2.2.3.1.3

swL2SubnetVLANTable

table
.1.3.6.1.4.1.171.11.117.4.1.2.2.4 · 1 row entry · 5 columns
Open in standard view 
A table containing the subnet VLAN information.
swL2SubnetVLANEntry entry .1.3.6.1.4.1.171.11.117.4.1.2.2.4.1
The entry of subnet VLAN information.
Indexes
swL2SubnetVLANIPAddress swL2SubnetVLANIPMask
Column Syntax OID
swL2SubnetVLANIPAddress
This object indicates the IP address.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.171.11.117.4.1.2.2.4.1.1
swL2SubnetVLANIPMask
This object indicates the IP mask.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.171.11.117.4.1.2.2.4.1.2
swL2SubnetVLANID
This object indicates the VLAN ID.
VlanIdr/w
Textual Convention: VlanId Integer32
Type Constraints:
range: 1..4094
 .1.3.6.1.4.1.171.11.117.4.1.2.2.4.1.3
swL2SubnetVLANPriority
This object indicates the priority.
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.171.11.117.4.1.2.2.4.1.4
swL2SubnetVLANRowStatus
This object indicates the status of this entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.171.11.117.4.1.2.2.4.1.5

swL2VlanPrecedenceTable

table
.1.3.6.1.4.1.171.11.117.4.1.2.2.5 · 1 row entry · 2 columns
Open in standard view 
A table containing the VLAN classification precedence information of each port.
swL2VlanPrecedenceEntry entry .1.3.6.1.4.1.171.11.117.4.1.2.2.5.1
The entry of VLAN classification precedence information.
Indexes
swL2VlanPrecedencePortIndex
Column Syntax OID
swL2VlanPrecedencePortIndex
This object indicates the port index.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.171.11.117.4.1.2.2.5.1.1
swL2VlanPrecedenceClassification
This object indicates the VLAN classification precedence.
Enumerationr/w
Enumerated Values:
1mac-based
2subnet-based
 .1.3.6.1.4.1.171.11.117.4.1.2.2.5.1.2

swL2PortInfoTable

table
.1.3.6.1.4.1.171.11.117.4.1.2.3.1 · 1 row entry · 7 columns
Open in standard view 
A table that contains information about every port.
swL2PortInfoEntry entry .1.3.6.1.4.1.171.11.117.4.1.2.3.1.1
A list of information for each port of the device.
Indexes
swL2PortInfoPortIndex swL2PortInfoMediumType
Column Syntax OID
swL2PortInfoPortIndex
This object indicates the module's port number.(1..Max port
number in the module)
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.171.11.117.4.1.2.3.1.1.1
swL2PortInfoMediumType
Indicates the medium type of the port number.
Enumeration
Enumerated Values:
1copper
2fiber
 .1.3.6.1.4.1.171.11.117.4.1.2.3.1.1.2
swL2PortInfoUnitID
Indicates the ID of the unit in the system.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.171.11.117.4.1.2.3.1.1.3
swL2PortInfoType
This object indicates the connector type of this port.
Enumeration
Enumerated Values:
0portType-none
2portType-100Base-T
3portType-100Base-X
4portType-1000Base-T
5portType-1000Base-X
6portType-10GBase-R
7portType-10GBase-CX4
8portType-SIO
9portType-module-empty
10portType-user-last
 .1.3.6.1.4.1.171.11.117.4.1.2.3.1.1.4
swL2PortInfoLinkStatus
This object indicates the port link status.
Enumeration
Enumerated Values:
1other
2link-pass
3link-fail
 .1.3.6.1.4.1.171.11.117.4.1.2.3.1.1.5
swL2PortInfoNwayStatus
This object indicates the port speed and duplex mode.
Enumeration
Enumerated Values:
0link-down
1full-10Mbps-8023x
2full-10Mbps-none
3half-10Mbps-backp
4half-10Mbps-none
5full-100Mbps-8023x
6full-100Mbps-none
7half-100Mbps-backp
8half-100Mbps-none
9full-1Gigabps-8023x
10full-1Gigabps-none
11half-1Gigabps-backp
12half-1Gigabps-none
13full-10Gigabps-8023x
14full-10Gigabps-none
15half-10Gigabps-8023x
16half-10Gigabps-none
17empty
18err-disabled
 .1.3.6.1.4.1.171.11.117.4.1.2.3.1.1.6
swL2PortInfoErrorDisabled
This object indicates the blocking type of this port.
Enumeration
Enumerated Values:
0none
1storm
2stp-lbd
3ctp-lbd
4ddm
5bpdu-protection
6oam-unidirectional-link
7power-saving
8port-security
9impb
 .1.3.6.1.4.1.171.11.117.4.1.2.3.1.1.8

swL2PortCtrlTable

table
.1.3.6.1.4.1.171.11.117.4.1.2.3.2 · 1 row entry · 10 columns
Open in standard view 
A table that contains control information about every port.
swL2PortCtrlEntry entry .1.3.6.1.4.1.171.11.117.4.1.2.3.2.1
A list of control information for each port on the device.
Indexes
swL2PortCtrlPortIndex swL2PortCtrlMediumType
Column Syntax OID
swL2PortCtrlPortIndex
This object indicates the module's port number.(1..Max port
number in the module)
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.171.11.117.4.1.2.3.2.1.1
swL2PortCtrlMediumType
Indicates the medium type of the port number.
Enumeration
Enumerated Values:
1copper
2fiber
 .1.3.6.1.4.1.171.11.117.4.1.2.3.2.1.2
swL2PortCtrlUnitIndex
Indicates the ID of the unit in the device
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.171.11.117.4.1.2.3.2.1.3
swL2PortCtrlAdminState
This object decides if the port is enabled or disabled.
Enumerationr/w
Enumerated Values:
1other
2disabled
3enabled
 .1.3.6.1.4.1.171.11.117.4.1.2.3.2.1.4
swL2PortCtrlNwayState
Chose the port speed, duplex mode, and N-Way function mode.
Enumerationr/w
Enumerated Values:
1other
2nway-enabled
3nway-disabled-10Mbps-Half
4nway-disabled-10Mbps-Full
5nway-disabled-100Mbps-Half
6nway-disabled-100Mbps-Full
7nway-disabled-1Gigabps-Half
8nway-disabled-1Gigabps-Full
9nway-disabled-1Gigabps-Full-master
10nway-disabled-1Gigabps-Full-slave
 .1.3.6.1.4.1.171.11.117.4.1.2.3.2.1.5
swL2PortCtrlFlowCtrlState
The flow control mechanism is different between full duplex
mode and half duplex mode. For half duplex mode, the jamming
signal is asserted. For full duplex mode, the IEEE 802.3x flow
control function sends PAUSE fram…
Enumerationr/w
Enumerated Values:
1other
2disabled
3enabled
 .1.3.6.1.4.1.171.11.117.4.1.2.3.2.1.6
swL2PortCtrlLearningState
This object decides if the port is locked or not.
Enumerationr/w
Enumerated Values:
1other
2disabled
3enabled
 .1.3.6.1.4.1.171.11.117.4.1.2.3.2.1.7
swL2PortCtrlMACNotifyState
This object sets each port's MAC notification state.
Enumerationr/w
Enumerated Values:
1other
2disabled
3enabled
 .1.3.6.1.4.1.171.11.117.4.1.2.3.2.1.8
swL2PortCtrlMDIXState
This object configures the MDIX setting of the port.
Enumerationr/w
Enumerated Values:
1auto
2normal
3cross
 .1.3.6.1.4.1.171.11.117.4.1.2.3.2.1.10
swL2PortCtrlAutoSpeedDowngradeState
This object configures the auto-speed-downgrade setting of the port.
Enumerationr/w
Enumerated Values:
1other
2disabled
3enabled
 .1.3.6.1.4.1.171.11.117.4.1.2.3.2.1.13

swL2PortCounterCtrlTable

table
.1.3.6.1.4.1.171.11.117.4.1.2.3.6 · 1 row entry · 2 columns
Open in standard view 
A table that is used to clear counter information about every port.
swL2PortCounterCtrlEntry entry .1.3.6.1.4.1.171.11.117.4.1.2.3.6.1
A list of entries used to clear the counter information for each port of the device.
Indexes
swL2PortCounterCtrlPortIndex
Column Syntax OID
swL2PortCounterCtrlPortIndex
This object indicates the module's port number.(1..Max port
number in the module)
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.171.11.117.4.1.2.3.6.1.1
swL2PortCounterClearCtrl
This object indicates whether to clear the counters for each port of the device or not.
Enumerationr/w
Enumerated Values:
1other
2start
 .1.3.6.1.4.1.171.11.117.4.1.2.3.6.1.2

swL2PortSfpInfoTable

table
.1.3.6.1.4.1.171.11.117.4.1.2.3.11 · 1 row entry · 11 columns
Open in standard view 
A table that contains information for each sfp pluged in port.
swL2PortSfpInfoEntry entry .1.3.6.1.4.1.171.11.117.4.1.2.3.11.1
A list of information for each sfp pluged in port.
Indexes
swL2PortSfpInfoPortIndex
Column Syntax OID
swL2PortSfpInfoPortIndex
This object indicates the module's port number.(1..Max port
number in the module)
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.171.11.117.4.1.2.3.11.1.1
swL2PortSfpInfoConnectType
The ConnectType of sfp informaiton.
OctetString
Constraints:
range: 1-10
 .1.3.6.1.4.1.171.11.117.4.1.2.3.11.1.2
swL2PortSfpInfoVendorName
The vendor name of sfp informaiton.
OctetString
Constraints:
range: 1-16
 .1.3.6.1.4.1.171.11.117.4.1.2.3.11.1.3
swL2PortSfpInfoVendorPN
The vendor PN of sfp informaiton.
OctetString
Constraints:
range: 1-16
 .1.3.6.1.4.1.171.11.117.4.1.2.3.11.1.4
swL2PortSfpInfoVendorSN
The vendor SN of sfp informaiton.
OctetString
Constraints:
range: 1-16
 .1.3.6.1.4.1.171.11.117.4.1.2.3.11.1.5
swL2PortSfpInfoVendorOUI
The vendor OUI of sfp information.
OctetString
Constraints:
range: 1-6
 .1.3.6.1.4.1.171.11.117.4.1.2.3.11.1.6
swL2PortSfpInfoVendorRev
The vendor Rev of sfp information.
OctetString
Constraints:
range: 1-4
 .1.3.6.1.4.1.171.11.117.4.1.2.3.11.1.7
swL2PortSfpInfoDateCode
The date code of sfp information.
OctetString
Constraints:
range: 1-8
 .1.3.6.1.4.1.171.11.117.4.1.2.3.11.1.8
swL2PortSfpInfoFiberType
The fiber type of sfp information.
OctetString
Constraints:
range: 1-25
 .1.3.6.1.4.1.171.11.117.4.1.2.3.11.1.9
swL2PortSfpInfoBaudRate
The baud rate of sfp information.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.171.11.117.4.1.2.3.11.1.10
swL2PortSfpInfoWavelength
The wavelength of sfp information.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.171.11.117.4.1.2.3.11.1.11

swL2TrunkCtrlTable

table
.1.3.6.1.4.1.171.11.117.4.1.2.9.3 · 1 row entry · 6 columns
Open in standard view 
This table specifies information about the logical port trunk groups.
swL2TrunkCtrlEntry entry .1.3.6.1.4.1.171.11.117.4.1.2.9.3.1
A list of information about each logical port trunk group.
Indexes
swL2TrunkIndex
Column Syntax OID
swL2TrunkIndex
The index number of the logical port trunk group. The trunk group
number depends on the existence of unit and module.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.171.11.117.4.1.2.9.3.1.1
swL2TrunkMasterPort
This object indicates the master port number of the port trunk
entry. When using Port Trunking, you cannot configure the other
ports of the group except the master port.
Their configuration must be the same as the mast…
Integer32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.171.11.117.4.1.2.9.3.1.3
swL2TrunkMember
Indicates the number of ports included in this Trunk group.
The trunk port number depends on the existence of the module.
The maximum number of ports is 8 for one trunk group.
PortListr/w
Textual Convention: PortList OctetString
Type Constraints:
range: 0..127
 .1.3.6.1.4.1.171.11.117.4.1.2.9.3.1.4
swL2TrunkFloodingPort
The object indicates the flooding port number of the port trunk
entry. The first port of the Trunk group is implicitly configured to
be the flooding port.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.171.11.117.4.1.2.9.3.1.5
swL2TrunkType
This object indicates the type of trunk group.
static: is a static trunk group
lacp: is a LACP trunk group.
Enumerationr/w
Enumerated Values:
1other
2static
3lacp
 .1.3.6.1.4.1.171.11.117.4.1.2.9.3.1.6
swL2TrunkState
This object indicates the status of this entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.171.11.117.4.1.2.9.3.1.7

swL2TrunkLACPPortTable

table
.1.3.6.1.4.1.171.11.117.4.1.2.9.5 · 1 row entry · 2 columns
Open in standard view 
This table specifies which ports are grouped together (this can be up to 8 ports)
into a single logical link.
swL2TrunkLACPPortEntry entry .1.3.6.1.4.1.171.11.117.4.1.2.9.5.1
A list of information specifying which ports are grouped together (this can be up to 8 ports)
into a single logical link.
Indexes
swL2TrunkLACPPortIndex
Column Syntax OID
swL2TrunkLACPPortIndex
The index of logical port LACP.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.171.11.117.4.1.2.9.5.1.1
swL2TrunkLACPPortState
The state of a logical port LACP.
Enumerationr/w
Enumerated Values:
1active
2passive
 .1.3.6.1.4.1.171.11.117.4.1.2.9.5.1.2

swL2TrunkVLANTable

table
.1.3.6.1.4.1.171.11.117.4.1.2.9.6 · 1 row entry · 2 columns
Open in standard view 
This table is used to manage the VLAN trunking feature of the device.
swL2TrunkVLANEntry entry .1.3.6.1.4.1.171.11.117.4.1.2.9.6.1
This object is used to configure the VLAN trunking settings for each port.
Indexes
swL2TrunkVLANPort
Column Syntax OID
swL2TrunkVLANPort
This object indicates the port being configured.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.171.11.117.4.1.2.9.6.1.1
swL2TrunkVLANState
The state of the logical port VLAN trunk.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.11.117.4.1.2.9.6.1.2

swL2MirrorGroupTable

table
.1.3.6.1.4.1.171.11.117.4.1.2.10.5 · 1 row entry · 6 columns
Open in standard view 
This table specifies information about the Mirror group configuration.
swL2MirrorGroupEntry entry .1.3.6.1.4.1.171.11.117.4.1.2.10.5.1
A list of information about each Mirror group configuration.
Indexes
swL2MirrorGroupID
Column Syntax OID
swL2MirrorGroupID
This object indicates the mirror group.
The range of this object is (1..n),
the value of n depends on detail project.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.11.117.4.1.2.10.5.1.1
swL2MirrorGroupRowStatus
This object manages this mirror group entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.171.11.117.4.1.2.10.5.1.2
swL2MirrorGroupState
This object indicates the mirror group state.
Enumerationr/w
Enumerated Values:
1other
2disabled
3enabled
 .1.3.6.1.4.1.171.11.117.4.1.2.10.5.1.3
swL2MirrorGroupLogicTargetPort
This object indicates the mirror group target port.
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.171.11.117.4.1.2.10.5.1.4
swL2MirrorGroupPortSourceIngress
This object indicates the mirror group ingress source ports.
PortListr/w
Textual Convention: PortList OctetString
Type Constraints:
range: 0..127
 .1.3.6.1.4.1.171.11.117.4.1.2.10.5.1.5
swL2MirrorGroupPortSourceEngress
This object indicates the mirror group engress source ports.
PortListr/w
Textual Convention: PortList OctetString
Type Constraints:
range: 0..127
 .1.3.6.1.4.1.171.11.117.4.1.2.10.5.1.6

swL2IGMPAccessAuthTable

table
.1.3.6.1.4.1.171.11.117.4.1.2.11.13 · 1 row entry · 2 columns
Open in standard view 
This table is used to manage the IGMP Access Authentication
configurations of the device.
swL2IGMPAccessAuthEntry entry .1.3.6.1.4.1.171.11.117.4.1.2.11.13.1
A list of manageable entities for IGMP Access Authentication.
The configuration is done per port.
Indexes
swL2IGMPAccessAuthPort
Column Syntax OID
swL2IGMPAccessAuthPort
The index of the swL2IGMPAccessAuthTable.
This object corresponds to the port being configured.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.11.117.4.1.2.11.13.1.1
swL2IGMPAccessAuthState
This object denotes the status of IGMP Access Authentication of the port.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.11.117.4.1.2.11.13.1.2

swL2TrafficSegTable

table
.1.3.6.1.4.1.171.11.117.4.1.2.14.1 · 1 row entry · 2 columns
Open in standard view 
This table specifies that the port can just forward traffic to the 
specific port list.
swL2TrafficSegEntry entry .1.3.6.1.4.1.171.11.117.4.1.2.14.1.1
A list of information which specifies the port with its traffic
forwarding list.
Indexes
swL2TrafficSegPort
Column Syntax OID
swL2TrafficSegPort
The port number of the logical port.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.171.11.117.4.1.2.14.1.1.1
swL2TrafficSegForwardPorts
The port list where a specific port can forward traffic.
PortListr/w
Textual Convention: PortList OctetString
Type Constraints:
range: 0..127
 .1.3.6.1.4.1.171.11.117.4.1.2.14.1.1.2

swL2MulticastFilterModeVlanTable

table
.1.3.6.1.4.1.171.11.117.4.1.2.17.1 · 1 row entry · 2 columns
Open in standard view 
A table that contains information about the VLAN multicast filter mode.
swL2MulticastFilterModeVlanEntry entry .1.3.6.1.4.1.171.11.117.4.1.2.17.1.1
A list of multicast filter mode information for each VLAN.
Indexes
swL2MulticastFilterVid
Column Syntax OID
swL2MulticastFilterVid
Indicates the VID for each VLAN.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.171.11.117.4.1.2.17.1.1.1
swL2MulticastFilterVlanMode
Specifies the multicast filter mode for each VLAN.
Enumerationr/w
Enumerated Values:
1forward-all-groups
2forward-unregistered-groups
3filter-unregistered-groups
 .1.3.6.1.4.1.171.11.117.4.1.2.17.1.1.2

swL2DhcpLocalRelayVLANTable

table
.1.3.6.1.4.1.171.11.117.4.1.2.24.2 · 1 row entry · 2 columns
Open in standard view 
This table is used to manage the DHCP local relay status
for each VLAN.
swL2DhcpLocalRelayVLANEntry entry .1.3.6.1.4.1.171.11.117.4.1.2.24.2.1
This object lists the current VLANs in the switch and their
corresponding DHCP local relay status.
Indexes
swL2DhcpLocalRelayVLANID
Column Syntax OID
swL2DhcpLocalRelayVLANID
This object shows the VIDs of the current VLANS in the switch.
Integer32
Constraints:
range: 1-4094
 .1.3.6.1.4.1.171.11.117.4.1.2.24.2.1.1
swL2DhcpLocalRelayVLANState
This object indicates the status of the DHCP relay function
of the VLAN.
Enumerationr/w
Enumerated Values:
1other
2disabled
3enabled
 .1.3.6.1.4.1.171.11.117.4.1.2.24.2.1.2