DGS3120-24PC-L2MGMT-MIB Table View

A table containing the CFM state of specified ports.

swL2DevCtrlCFMPortEntry row .1.3.6.1.4.1.171.11.117.3.1.2.1.2.21.2.1

The entry of the CFM state on specified ports.

Indexes

swL2DevCtrlCFMPortIndex

Column	Syntax	OID
swL2DevCtrlCFMPortIndex This object indicates the port number.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.171.11.117.3.1.2.1.2.21.2.1.1
swL2DevCtrlCFMPortState This object indicates the CFM state by port.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.171.11.117.3.1.2.1.2.21.2.1.2

The table is used to configure the subtype of Port ID TLV for ports.

swL2DevCtrlLLDPExtPortSubTypeEntry row .1.3.6.1.4.1.171.11.117.3.1.2.1.2.24.1

An entry contains the information of subtype of Port ID TLV on a port.

Indexes

swL2PortInfoPortIndex

Column	Syntax	OID
swL2DevCtrlLLDPExtPortSubType This object represents how to encode the port ID in Port ID TLV. localPortNumber - The 'port ID' will be encoded with local port number. macAddress(2) -The 'port ID' will be encoded with MAC address.	Enumerationr/w Enumerated Values: 1 localPortNumber 2 macAddress	.1.3.6.1.4.1.171.11.117.3.1.2.1.2.24.1.1

A table containing static configuration information for
each VLAN configured into the device by (local or
network) management. All entries are permanent and will
be restored after the device is reset.

swL2VlanStaticEntry row .1.3.6.1.4.1.171.11.117.3.1.2.2.1.1

Static information for a VLAN configured into this
device by (local or network) management.

Indexes

swL2VlanIndex

Column	Syntax	OID
swL2VlanIndex The VLAN-ID or other identifier referring to this VLAN.	VlanId Type Constraints: range: 1..4094	.1.3.6.1.4.1.171.11.117.3.1.2.2.1.1.1
swL2VLANAdvertisement This object indicates if the advertisement is active or not.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.171.11.117.3.1.2.2.1.1.2

A table containing the VLAN and port role information of each port.

swL2VlanPortInfoEntry row .1.3.6.1.4.1.171.11.117.3.1.2.2.3.1

The table entry of VLAN port information.

Indexes

swL2VlanPortInfoPortIndex swL2VlanPortInfoVid

Column	Syntax	OID
swL2VlanPortInfoPortIndex The port index.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.171.11.117.3.1.2.2.3.1.1
swL2VlanPortInfoVid The VLAN ID assigned to a special port	VlanId Type Constraints: range: 1..4094	.1.3.6.1.4.1.171.11.117.3.1.2.2.3.1.2
swL2VlanPortInfoPortRole The port role of a special port. When the role is 'other', it means this port does not belong to the VLAN.	Enumeration Enumerated Values: 1 other 2 untagged 3 tagged 4 dynamic 5 forbidden	.1.3.6.1.4.1.171.11.117.3.1.2.2.3.1.3

A table containing the subnet VLAN information.

swL2SubnetVLANEntry row .1.3.6.1.4.1.171.11.117.3.1.2.2.4.1

The entry of subnet VLAN information.

Indexes

swL2SubnetVLANIPAddress swL2SubnetVLANIPMask

Column	Syntax	OID
swL2SubnetVLANIPAddress This object indicates the IP address.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.171.11.117.3.1.2.2.4.1.1
swL2SubnetVLANIPMask This object indicates the IP mask.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.171.11.117.3.1.2.2.4.1.2
swL2SubnetVLANID This object indicates the VLAN ID.	VlanIdr/w Type Constraints: range: 1..4094	.1.3.6.1.4.1.171.11.117.3.1.2.2.4.1.3
swL2SubnetVLANPriority This object indicates the priority.	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.171.11.117.3.1.2.2.4.1.4
swL2SubnetVLANRowStatus This object indicates the status of this entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.171.11.117.3.1.2.2.4.1.5

A table containing the VLAN classification precedence information of each port.

swL2VlanPrecedenceEntry row .1.3.6.1.4.1.171.11.117.3.1.2.2.5.1

The entry of VLAN classification precedence information.

Indexes

swL2VlanPrecedencePortIndex

Column	Syntax	OID
swL2VlanPrecedencePortIndex This object indicates the port index.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.171.11.117.3.1.2.2.5.1.1
swL2VlanPrecedenceClassification This object indicates the VLAN classification precedence.	Enumerationr/w Enumerated Values: 1 mac-based 2 subnet-based	.1.3.6.1.4.1.171.11.117.3.1.2.2.5.1.2

A table that contains information about every port.

swL2PortInfoEntry row .1.3.6.1.4.1.171.11.117.3.1.2.3.1.1

A list of information for each port of the device.

Indexes

swL2PortInfoPortIndex swL2PortInfoMediumType

Column	Syntax	OID
swL2PortInfoPortIndex This object indicates the module's port number.(1..Max port number in the module)	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.171.11.117.3.1.2.3.1.1.1
swL2PortInfoMediumType Indicates the medium type of the port number.	Enumeration Enumerated Values: 1 copper 2 fiber	.1.3.6.1.4.1.171.11.117.3.1.2.3.1.1.2
swL2PortInfoUnitID Indicates the ID of the unit in the system.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.171.11.117.3.1.2.3.1.1.3
swL2PortInfoType This object indicates the connector type of this port.	Enumeration Enumerated Values: 0 portType-none 2 portType-100Base-T 3 portType-100Base-X 4 portType-1000Base-T 5 portType-1000Base-X 6 portType-10GBase-R 7 portType-10GBase-CX4 8 portType-SIO 9 portType-module-empty 10 portType-user-last	.1.3.6.1.4.1.171.11.117.3.1.2.3.1.1.4
swL2PortInfoLinkStatus This object indicates the port link status.	Enumeration Enumerated Values: 1 other 2 link-pass 3 link-fail	.1.3.6.1.4.1.171.11.117.3.1.2.3.1.1.5
swL2PortInfoNwayStatus This object indicates the port speed and duplex mode.	Enumeration Enumerated Values: 0 link-down 1 full-10Mbps-8023x 2 full-10Mbps-none 3 half-10Mbps-backp 4 half-10Mbps-none 5 full-100Mbps-8023x 6 full-100Mbps-none 7 half-100Mbps-backp 8 half-100Mbps-none 9 full-1Gigabps-8023x 10 full-1Gigabps-none 11 half-1Gigabps-backp 12 half-1Gigabps-none 13 full-10Gigabps-8023x 14 full-10Gigabps-none 15 half-10Gigabps-8023x 16 half-10Gigabps-none 17 empty 18 err-disabled	.1.3.6.1.4.1.171.11.117.3.1.2.3.1.1.6
swL2PortInfoErrorDisabled This object indicates the blocking type of this port.	Enumeration Enumerated Values: 0 none 1 storm 2 stp-lbd 3 ctp-lbd 4 ddm 5 bpdu-protection 6 oam-unidirectional-link 7 power-saving 8 port-security 9 impb	.1.3.6.1.4.1.171.11.117.3.1.2.3.1.1.8

A table that contains control information about every port.

swL2PortCtrlEntry row .1.3.6.1.4.1.171.11.117.3.1.2.3.2.1

A list of control information for each port on the device.

Indexes

swL2PortCtrlPortIndex swL2PortCtrlMediumType

Column	Syntax	OID
swL2PortCtrlPortIndex This object indicates the module's port number.(1..Max port number in the module)	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.171.11.117.3.1.2.3.2.1.1
swL2PortCtrlMediumType Indicates the medium type of the port number.	Enumeration Enumerated Values: 1 copper 2 fiber	.1.3.6.1.4.1.171.11.117.3.1.2.3.2.1.2
swL2PortCtrlUnitIndex Indicates the ID of the unit in the device	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.171.11.117.3.1.2.3.2.1.3
swL2PortCtrlAdminState This object decides if the port is enabled or disabled.	Enumerationr/w Enumerated Values: 1 other 2 disabled 3 enabled	.1.3.6.1.4.1.171.11.117.3.1.2.3.2.1.4
swL2PortCtrlNwayState Chose the port speed, duplex mode, and N-Way function mode.	Enumerationr/w Enumerated Values: 1 other 2 nway-enabled 3 nway-disabled-10Mbps-Half 4 nway-disabled-10Mbps-Full 5 nway-disabled-100Mbps-Half 6 nway-disabled-100Mbps-Full 7 nway-disabled-1Gigabps-Half 8 nway-disabled-1Gigabps-Full 9 nway-disabled-1Gigabps-Full-master 10 nway-disabled-1Gigabps-Full-slave	.1.3.6.1.4.1.171.11.117.3.1.2.3.2.1.5
swL2PortCtrlFlowCtrlState The flow control mechanism is different between full duplex mode and half duplex mode. For half duplex mode, the jamming signal is asserted. For full duplex mode, the IEEE 802.3x flow control function sends PAUSE fram…	Enumerationr/w Enumerated Values: 1 other 2 disabled 3 enabled	.1.3.6.1.4.1.171.11.117.3.1.2.3.2.1.6
swL2PortCtrlLearningState This object decides if the port is locked or not.	Enumerationr/w Enumerated Values: 1 other 2 disabled 3 enabled	.1.3.6.1.4.1.171.11.117.3.1.2.3.2.1.7
swL2PortCtrlMACNotifyState This object sets each port's MAC notification state.	Enumerationr/w Enumerated Values: 1 other 2 disabled 3 enabled	.1.3.6.1.4.1.171.11.117.3.1.2.3.2.1.8
swL2PortCtrlMDIXState This object configures the MDIX setting of the port.	Enumerationr/w Enumerated Values: 1 auto 2 normal 3 cross	.1.3.6.1.4.1.171.11.117.3.1.2.3.2.1.10
swL2PortCtrlAutoSpeedDowngradeState This object configures the auto-speed-downgrade setting of the port.	Enumerationr/w Enumerated Values: 1 other 2 disabled 3 enabled	.1.3.6.1.4.1.171.11.117.3.1.2.3.2.1.13

A table that is used to clear counter information about every port.

swL2PortCounterCtrlEntry row .1.3.6.1.4.1.171.11.117.3.1.2.3.6.1

A list of entries used to clear the counter information for each port of the device.

Indexes

swL2PortCounterCtrlPortIndex

Column	Syntax	OID
swL2PortCounterCtrlPortIndex This object indicates the module's port number.(1..Max port number in the module)	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.171.11.117.3.1.2.3.6.1.1
swL2PortCounterClearCtrl This object indicates whether to clear the counters for each port of the device or not.	Enumerationr/w Enumerated Values: 1 other 2 start	.1.3.6.1.4.1.171.11.117.3.1.2.3.6.1.2

A table that contains information for each sfp pluged in port.

swL2PortSfpInfoEntry row .1.3.6.1.4.1.171.11.117.3.1.2.3.11.1

A list of information for each sfp pluged in port.

Indexes

swL2PortSfpInfoPortIndex

Column	Syntax	OID
swL2PortSfpInfoPortIndex This object indicates the module's port number.(1..Max port number in the module)	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.171.11.117.3.1.2.3.11.1.1
swL2PortSfpInfoConnectType The ConnectType of sfp informaiton.	OctetString Constraints: range: 1-10	.1.3.6.1.4.1.171.11.117.3.1.2.3.11.1.2
swL2PortSfpInfoVendorName The vendor name of sfp informaiton.	OctetString Constraints: range: 1-16	.1.3.6.1.4.1.171.11.117.3.1.2.3.11.1.3
swL2PortSfpInfoVendorPN The vendor PN of sfp informaiton.	OctetString Constraints: range: 1-16	.1.3.6.1.4.1.171.11.117.3.1.2.3.11.1.4
swL2PortSfpInfoVendorSN The vendor SN of sfp informaiton.	OctetString Constraints: range: 1-16	.1.3.6.1.4.1.171.11.117.3.1.2.3.11.1.5
swL2PortSfpInfoVendorOUI The vendor OUI of sfp information.	OctetString Constraints: range: 1-6	.1.3.6.1.4.1.171.11.117.3.1.2.3.11.1.6
swL2PortSfpInfoVendorRev The vendor Rev of sfp information.	OctetString Constraints: range: 1-4	.1.3.6.1.4.1.171.11.117.3.1.2.3.11.1.7
swL2PortSfpInfoDateCode The date code of sfp information.	OctetString Constraints: range: 1-8	.1.3.6.1.4.1.171.11.117.3.1.2.3.11.1.8
swL2PortSfpInfoFiberType The fiber type of sfp information.	OctetString Constraints: range: 1-25	.1.3.6.1.4.1.171.11.117.3.1.2.3.11.1.9
swL2PortSfpInfoBaudRate The baud rate of sfp information.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.171.11.117.3.1.2.3.11.1.10
swL2PortSfpInfoWavelength The wavelength of sfp information.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.171.11.117.3.1.2.3.11.1.11

This table specifies information about the logical port trunk groups.

swL2TrunkCtrlEntry row .1.3.6.1.4.1.171.11.117.3.1.2.9.3.1

A list of information about each logical port trunk group.

Indexes

swL2TrunkIndex

Column	Syntax	OID
swL2TrunkIndex The index number of the logical port trunk group. The trunk group number depends on the existence of unit and module.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.171.11.117.3.1.2.9.3.1.1
swL2TrunkMasterPort This object indicates the master port number of the port trunk entry. When using Port Trunking, you cannot configure the other ports of the group except the master port. Their configuration must be the same as the mast…	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.171.11.117.3.1.2.9.3.1.3
swL2TrunkMember Indicates the number of ports included in this Trunk group. The trunk port number depends on the existence of the module. The maximum number of ports is 8 for one trunk group.	PortListr/w Type Constraints: range: 0..127	.1.3.6.1.4.1.171.11.117.3.1.2.9.3.1.4
swL2TrunkFloodingPort The object indicates the flooding port number of the port trunk entry. The first port of the Trunk group is implicitly configured to be the flooding port.	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.171.11.117.3.1.2.9.3.1.5
swL2TrunkType This object indicates the type of trunk group. static: is a static trunk group lacp: is a LACP trunk group.	Enumerationr/w Enumerated Values: 1 other 2 static 3 lacp	.1.3.6.1.4.1.171.11.117.3.1.2.9.3.1.6
swL2TrunkState This object indicates the status of this entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.171.11.117.3.1.2.9.3.1.7

This table specifies which ports are grouped together (this can be up to 8 ports)
into a single logical link.

swL2TrunkLACPPortEntry row .1.3.6.1.4.1.171.11.117.3.1.2.9.5.1

A list of information specifying which ports are grouped together (this can be up to 8 ports)
into a single logical link.

Indexes

swL2TrunkLACPPortIndex

Column	Syntax	OID
swL2TrunkLACPPortIndex The index of logical port LACP.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.171.11.117.3.1.2.9.5.1.1
swL2TrunkLACPPortState The state of a logical port LACP.	Enumerationr/w Enumerated Values: 1 active 2 passive	.1.3.6.1.4.1.171.11.117.3.1.2.9.5.1.2

This table is used to manage the VLAN trunking feature of the device.

swL2TrunkVLANEntry row .1.3.6.1.4.1.171.11.117.3.1.2.9.6.1

This object is used to configure the VLAN trunking settings for each port.

Indexes

swL2TrunkVLANPort

Column	Syntax	OID
swL2TrunkVLANPort This object indicates the port being configured.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.171.11.117.3.1.2.9.6.1.1
swL2TrunkVLANState The state of the logical port VLAN trunk.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.171.11.117.3.1.2.9.6.1.2

This table specifies information about the Mirror group configuration.

swL2MirrorGroupEntry row .1.3.6.1.4.1.171.11.117.3.1.2.10.5.1

A list of information about each Mirror group configuration.

Indexes

swL2MirrorGroupID

Column	Syntax	OID
swL2MirrorGroupID This object indicates the mirror group. The range of this object is (1..n), the value of n depends on detail project.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.171.11.117.3.1.2.10.5.1.1
swL2MirrorGroupRowStatus This object manages this mirror group entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.171.11.117.3.1.2.10.5.1.2
swL2MirrorGroupState This object indicates the mirror group state.	Enumerationr/w Enumerated Values: 1 other 2 disabled 3 enabled	.1.3.6.1.4.1.171.11.117.3.1.2.10.5.1.3
swL2MirrorGroupLogicTargetPort This object indicates the mirror group target port.	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.171.11.117.3.1.2.10.5.1.4
swL2MirrorGroupPortSourceIngress This object indicates the mirror group ingress source ports.	PortListr/w Type Constraints: range: 0..127	.1.3.6.1.4.1.171.11.117.3.1.2.10.5.1.5
swL2MirrorGroupPortSourceEngress This object indicates the mirror group engress source ports.	PortListr/w Type Constraints: range: 0..127	.1.3.6.1.4.1.171.11.117.3.1.2.10.5.1.6

This table is used to manage the IGMP Access Authentication
configurations of the device.

swL2IGMPAccessAuthEntry row .1.3.6.1.4.1.171.11.117.3.1.2.11.13.1

A list of manageable entities for IGMP Access Authentication.
The configuration is done per port.

Indexes

swL2IGMPAccessAuthPort

Column	Syntax	OID
swL2IGMPAccessAuthPort The index of the swL2IGMPAccessAuthTable. This object corresponds to the port being configured.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.171.11.117.3.1.2.11.13.1.1
swL2IGMPAccessAuthState This object denotes the status of IGMP Access Authentication of the port.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.171.11.117.3.1.2.11.13.1.2

This table specifies that the port can just forward traffic to the 
specific port list.

swL2TrafficSegEntry row .1.3.6.1.4.1.171.11.117.3.1.2.14.1.1

A list of information which specifies the port with its traffic
forwarding list.

Indexes

swL2TrafficSegPort

Column	Syntax	OID
swL2TrafficSegPort The port number of the logical port.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.171.11.117.3.1.2.14.1.1.1
swL2TrafficSegForwardPorts The port list where a specific port can forward traffic.	PortListr/w Type Constraints: range: 0..127	.1.3.6.1.4.1.171.11.117.3.1.2.14.1.1.2

A table that contains information about the VLAN multicast filter mode.

swL2MulticastFilterModeVlanEntry row .1.3.6.1.4.1.171.11.117.3.1.2.17.1.1

A list of multicast filter mode information for each VLAN.

Indexes

swL2MulticastFilterVid

Column	Syntax	OID
swL2MulticastFilterVid Indicates the VID for each VLAN.	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.171.11.117.3.1.2.17.1.1.1
swL2MulticastFilterVlanMode Specifies the multicast filter mode for each VLAN.	Enumerationr/w Enumerated Values: 1 forward-all-groups 2 forward-unregistered-groups 3 filter-unregistered-groups	.1.3.6.1.4.1.171.11.117.3.1.2.17.1.1.2

This table is used to manage the DHCP local relay status
for each VLAN.

swL2DhcpLocalRelayVLANEntry row .1.3.6.1.4.1.171.11.117.3.1.2.24.2.1

This object lists the current VLANs in the switch and their
corresponding DHCP local relay status.

Indexes

swL2DhcpLocalRelayVLANID

Column	Syntax	OID
swL2DhcpLocalRelayVLANID This object shows the VIDs of the current VLANS in the switch.	Integer32 Constraints: range: 1-4094	.1.3.6.1.4.1.171.11.117.3.1.2.24.2.1.1
swL2DhcpLocalRelayVLANState This object indicates the status of the DHCP relay function of the VLAN.	Enumerationr/w Enumerated Values: 1 other 2 disabled 3 enabled	.1.3.6.1.4.1.171.11.117.3.1.2.24.2.1.2